AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-27 06:20:50 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
270f8ce312
linux_dsm_epyc7002/arch/arm/boot/dts/tegra30.dtsi

457 lines
9.7 KiB
Plaintext
Raw Normal View History

arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
/include/ "skeleton.dtsi"
/ {
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
ARM: tegra: Add Tegra30 host1x support Add the host1x node along with its children to the Tegra30 DTSI. Board- specific DTS files are expected to enable the available outputs and complement the device tree with data specific to the hardware. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 04:07:57 +07:00
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x54000000 0x54000000 0x04000000>;
mpe {
compatible = "nvidia,tegra30-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
};
vi {
compatible = "nvidia,tegra30-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
};
epp {
compatible = "nvidia,tegra30-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
};
isp {
compatible = "nvidia,tegra30-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
};
gr2d {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
};
gr3d {
compatible = "nvidia,tegra30-gr3d";
reg = <0x54180000 0x00040000>;
};
dc@54200000 {
compatible = "nvidia,tegra30-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
rgb {
status = "disabled";
};
};
dc@54240000 {
compatible = "nvidia,tegra30-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
rgb {
status = "disabled";
};
};
hdmi {
compatible = "nvidia,tegra30-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
status = "disabled";
};
tvo {
compatible = "nvidia,tegra30-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
status = "disabled";
};
};
ARM: tegra: add TWD to device tree This will allow timer.c to use twd_local_timer_of_register(), and hence not need to hard-code the TWD address or IRQ. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20 03:17:24 +07:00
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
};
ARM: tegra: dt: add L2 cache controller Add L2 cache controller binding into DT for Tegra. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-29 17:25:45 +07:00
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <6 6 2>;
arm,tag-latency = <5 5 2>;
cache-unified;
cache-level = <2>;
};
ARM: dt: tegra: remove unnecessary unit addresses DT node names only need to include the unit address if it's required to make the node name unique. Remove the unnecessary unit addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:17:47 +07:00
intc: interrupt-controller {
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
compatible = "arm,cortex-a9-gic";
ARM: dt: tegra: format regs properties consistently Place each reg "entry" on its own line, and wrap the whole list in <> rather than each individual entry. The convention chosen here is slightly arbitrary, but is not consistent throughout all Tegra files. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:26:03 +07:00
reg = <0x50041000 0x1000
0x50040100 0x0100>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
interrupt-controller;
#interrupt-cells = <3>;
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: tegra: define DT bindings for and instantiate timer The Tegra timer provides a number of 29-bit timer channels, a single 32-bit free running counter, and in the Tegra30 variant, 5 watchdog modules. The first two channels may also trigger a legacy watchdog reset. Define a DT binding for this HW module, and add the module into the Tegra device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20 01:02:31 +07:00
timer@60005000 {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04
0 121 0x04
0 122 0x04>;
};
ARM: dt: tegra: remove unnecessary unit addresses DT node names only need to include the unit address if it's required to make the node name unique. Remove the unnecessary unit addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:17:47 +07:00
apbdma: dma {
ARM: dt: tegra: Add Tegra APB DMA device tree binding Document binding, and add the node to tegra*.dtsi. The driver isn't actually instantiated from this node yet, but the I2S binding will rely on being able to refer to the APB DMA node using a phandle. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-12 06:09:54 +07:00
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 104 0x04
0 105 0x04
0 106 0x04
0 107 0x04
0 108 0x04
0 109 0x04
0 110 0x04
0 111 0x04
0 112 0x04
0 113 0x04
0 114 0x04
0 115 0x04
0 116 0x04
0 117 0x04
0 118 0x04
0 119 0x04
0 128 0x04
0 129 0x04
0 130 0x04
0 131 0x04
0 132 0x04
0 133 0x04
0 134 0x04
0 135 0x04
0 136 0x04
0 137 0x04
0 138 0x04
0 139 0x04
0 140 0x04
0 141 0x04
0 142 0x04
0 143 0x04>;
ARM: dt: tegra: Add Tegra APB DMA device tree binding Document binding, and add the node to tegra*.dtsi. The driver isn't actually instantiated from this node yet, but the I2S binding will rely on being able to refer to the APB DMA node using a phandle. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-12 06:09:54 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
ahb: ahb {
compatible = "nvidia,tegra30-ahb";
reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: remove unnecessary unit addresses DT node names only need to include the unit address if it's required to make the node name unique. Remove the unnecessary unit addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:17:47 +07:00
gpio: gpio {
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
0 34 0x04
0 35 0x04
0 55 0x04
0 87 0x04
0 89 0x04
0 125 0x04>;
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
#gpio-cells = <2>;
gpio-controller;
gpio: tegra: Dynamically allocate IRQ base, and support DT Enhance the driver to dynamically allocate the base IRQ number, and create an IRQ domain for itself. The use of an IRQ domain ensures that any device tree node interrupts properties are correctly parsed. Describe interrupt-related properties in the device tree binding docs, and the contents of "child" node interrupts property. Update tegra*.dtsi to specify the required interrupt-related properties. Finally, remove the definition of TEGRA_GPIO_TO_IRQ; this macro no longer gives correct results since the IRQ numbers for GPIOs are dynamically allocated. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-04 15:39:37 +07:00
#interrupt-cells = <2>;
interrupt-controller;
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
pinmux: pinmux {
compatible = "nvidia,tegra30-pinmux";
ARM: dt: tegra: fix length of pad control and mux registers The reg property contains <base length> not <base last_offset>. Fix the length values to be length not last_offset. Cc: stable@vger.kernel.org Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-30 17:07:09 +07:00
reg = <0x70000868 0xd4 /* Pad control registers */
0x70003000 0x3e4>; /* Mux registers */
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
};
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
serial@70006000 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 36 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
serial@70006040 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 37 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
serial@70006200 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 46 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
serial@70006300 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 90 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
serial@70006400 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 91 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: tegra: dts: Add pwm label PWM devices can be referenced in the DT by phandle and per-chip index. In order for this to work properly, the PWM controller needs to have a label attached to it. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20 22:06:05 +07:00
pwm: pwm {
pwm: tegra: Add device tree support Add auxdata to instantiate the PWFM controller from a device tree, include the corresponding nodes in the dtsi files for Tegra 20 and Tegra 30 and add binding documentation. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-12-21 14:04:13 +07:00
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
};
ARM: tegra: define DT bindings for and instantiate RTC The Tegra RTC maintains seconds and milliseconds counters, and five alarm registers. The alarms and other interrupts may wake the system from low-power state. Define a DT binding for this HW module, and add the module into the Tegra device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20 01:13:16 +07:00
rtc {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
i2c@7000c400 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
i2c@7000c500 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
i2c@7000c700 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c700 0x100>;
interrupts = <0 120 0x04>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
i2c@7000d000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000d000 0x100>;
interrupts = <0 53 0x04>;
ARM: dt: tegra: consistent basic property ordering Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:12:52 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
};
ARM: tegra: dts: add slink controller dt entry Add slink controller details in the dts file of Tegra20 and Tegra30. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-30 14:05:23 +07:00
spi@7000d400 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <0 59 0x04>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@7000d600 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d480 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@7000da00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <0 93 0x04>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@7000dc00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000dc00 0x200>;
interrupts = <0 94 0x04>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@7000de00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000de00 0x200>;
interrupts = <0 79 0x04>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
pmc {
compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
};
ARM: dt: tegra{20,30}.dtsi: Rename "mc" to "memory-controller" Use a more plain english name. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> [swarren: remove redundant unit address from tegra30.dtsi change] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-17 02:47:44 +07:00
memory-controller {
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
0x7000f200 0x028
0x7000f284 0x17c>;
interrupts = <0 77 0x04>;
};
smmu {
compatible = "nvidia,tegra30-smmu";
reg = <0x7000f010 0x02c
0x7000f1f0 0x010
0x7000f228 0x05c>;
nvidia,#asids = <4>; /* # of ASIDs */
dma-window = <0 0x40000000>; /* IOVA start & length */
nvidia,ahb = <&ahb>;
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
ahub {
compatible = "nvidia,tegra30-ahub";
ARM: dt: tegra: format regs properties consistently Place each reg "entry" on its own line, and wrap the whole list in <> rather than each individual entry. The convention chosen here is slightly arbitrary, but is not consistent throughout all Tegra files. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:26:03 +07:00
reg = <0x70080000 0x200
0x70080200 0x100>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <0 103 0x04>;
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
nvidia,dma-request-selector = <&apbdma 1>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
tegra_i2s0: i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
};
tegra_i2s1: i2s@70080400 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
};
tegra_i2s2: i2s@70080500 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
};
tegra_i2s3: i2s@70080600 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
};
tegra_i2s4: i2s@70080700 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add audio-related nodes Add nodes for the Tegra30 AHUB and I2S controllers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28 01:40:53 +07:00
};
};
ARM: dt: tegra: Add device tree support for AHB Add AHB entry for tegra20/30. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-07 13:43:47 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
sdhci@78000000 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra: Add device tree support for AHB Add AHB entry for tegra20/30. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-07 13:43:47 +07:00
};
ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes Add Tegra MC(Memory Controller) nodes for tegra30.dtsi. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-10 04:42:33 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
sdhci@78000200 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes Add Tegra MC(Memory Controller) nodes for tegra30.dtsi. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-10 04:42:33 +07:00
};
ARM: dt: tegra30.dtsi: Add SMMU node Add a node for the Tegra30 SMMU Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-10 04:50:21 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
sdhci@78000400 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
};
sdhci@78000600 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled" This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the tegra part here. Everything else goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-12 02:09:45 +07:00
status = "disabled";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 144 0x04
0 145 0x04
0 146 0x04
0 147 0x04>;
ARM: dt: tegra30.dtsi: Add SMMU node Add a node for the Tegra30 SMMU Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-10 04:50:21 +07:00
};
arm/tegra: initial device tree for tegra30 This patch adds the initial device tree for tegra30 Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 22:03:13 +07:00
};
Reference in New Issue Copy Permalink