linux_dsm_epyc7002/drivers/video/omap2/dss/dsi.c

4600 lines
114 KiB
C
Raw Normal View History

/*
* linux/drivers/video/omap2/dss/dsi.c
*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "DSI"
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/semaphore.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <video/omapdss.h>
#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"
/*#define VERBOSE_IRQ*/
#define DSI_CATCH_MISSING_TE
struct dsi_reg { u16 idx; };
#define DSI_REG(idx) ((const struct dsi_reg) { idx })
#define DSI_SZ_REGS SZ_1K
/* DSI Protocol Engine */
#define DSI_REVISION DSI_REG(0x0000)
#define DSI_SYSCONFIG DSI_REG(0x0010)
#define DSI_SYSSTATUS DSI_REG(0x0014)
#define DSI_IRQSTATUS DSI_REG(0x0018)
#define DSI_IRQENABLE DSI_REG(0x001C)
#define DSI_CTRL DSI_REG(0x0040)
#define DSI_GNQ DSI_REG(0x0044)
#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048)
#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C)
#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050)
#define DSI_CLK_CTRL DSI_REG(0x0054)
#define DSI_TIMING1 DSI_REG(0x0058)
#define DSI_TIMING2 DSI_REG(0x005C)
#define DSI_VM_TIMING1 DSI_REG(0x0060)
#define DSI_VM_TIMING2 DSI_REG(0x0064)
#define DSI_VM_TIMING3 DSI_REG(0x0068)
#define DSI_CLK_TIMING DSI_REG(0x006C)
#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070)
#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074)
#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078)
#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C)
#define DSI_VM_TIMING4 DSI_REG(0x0080)
#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084)
#define DSI_VM_TIMING5 DSI_REG(0x0088)
#define DSI_VM_TIMING6 DSI_REG(0x008C)
#define DSI_VM_TIMING7 DSI_REG(0x0090)
#define DSI_STOPCLK_TIMING DSI_REG(0x0094)
#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20))
#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20))
#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20))
#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20))
#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20))
#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20))
#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20))
/* DSIPHY_SCP */
#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000)
#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004)
#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008)
#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014)
#define DSI_DSIPHY_CFG10 DSI_REG(0x200 + 0x0028)
/* DSI_PLL_CTRL_SCP */
#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000)
#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004)
#define DSI_PLL_GO DSI_REG(0x300 + 0x0008)
#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C)
#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010)
#define REG_GET(dsidev, idx, start, end) \
FLD_GET(dsi_read_reg(dsidev, idx), start, end)
#define REG_FLD_MOD(dsidev, idx, val, start, end) \
dsi_write_reg(dsidev, idx, FLD_MOD(dsi_read_reg(dsidev, idx), val, start, end))
/* Global interrupts */
#define DSI_IRQ_VC0 (1 << 0)
#define DSI_IRQ_VC1 (1 << 1)
#define DSI_IRQ_VC2 (1 << 2)
#define DSI_IRQ_VC3 (1 << 3)
#define DSI_IRQ_WAKEUP (1 << 4)
#define DSI_IRQ_RESYNC (1 << 5)
#define DSI_IRQ_PLL_LOCK (1 << 7)
#define DSI_IRQ_PLL_UNLOCK (1 << 8)
#define DSI_IRQ_PLL_RECALL (1 << 9)
#define DSI_IRQ_COMPLEXIO_ERR (1 << 10)
#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14)
#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15)
#define DSI_IRQ_TE_TRIGGER (1 << 16)
#define DSI_IRQ_ACK_TRIGGER (1 << 17)
#define DSI_IRQ_SYNC_LOST (1 << 18)
#define DSI_IRQ_LDO_POWER_GOOD (1 << 19)
#define DSI_IRQ_TA_TIMEOUT (1 << 20)
#define DSI_IRQ_ERROR_MASK \
(DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \
DSI_IRQ_TA_TIMEOUT)
#define DSI_IRQ_CHANNEL_MASK 0xf
/* Virtual channel interrupts */
#define DSI_VC_IRQ_CS (1 << 0)
#define DSI_VC_IRQ_ECC_CORR (1 << 1)
#define DSI_VC_IRQ_PACKET_SENT (1 << 2)
#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3)
#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4)
#define DSI_VC_IRQ_BTA (1 << 5)
#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6)
#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7)
#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8)
#define DSI_VC_IRQ_ERROR_MASK \
(DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \
DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \
DSI_VC_IRQ_FIFO_TX_UDF)
/* ComplexIO interrupts */
#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0)
#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1)
#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2)
#define DSI_CIO_IRQ_ERRSYNCESC4 (1 << 3)
#define DSI_CIO_IRQ_ERRSYNCESC5 (1 << 4)
#define DSI_CIO_IRQ_ERRESC1 (1 << 5)
#define DSI_CIO_IRQ_ERRESC2 (1 << 6)
#define DSI_CIO_IRQ_ERRESC3 (1 << 7)
#define DSI_CIO_IRQ_ERRESC4 (1 << 8)
#define DSI_CIO_IRQ_ERRESC5 (1 << 9)
#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10)
#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11)
#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12)
#define DSI_CIO_IRQ_ERRCONTROL4 (1 << 13)
#define DSI_CIO_IRQ_ERRCONTROL5 (1 << 14)
#define DSI_CIO_IRQ_STATEULPS1 (1 << 15)
#define DSI_CIO_IRQ_STATEULPS2 (1 << 16)
#define DSI_CIO_IRQ_STATEULPS3 (1 << 17)
#define DSI_CIO_IRQ_STATEULPS4 (1 << 18)
#define DSI_CIO_IRQ_STATEULPS5 (1 << 19)
#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20)
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21)
#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22)
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23)
#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24)
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25)
#define DSI_CIO_IRQ_ERRCONTENTIONLP0_4 (1 << 26)
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_4 (1 << 27)
#define DSI_CIO_IRQ_ERRCONTENTIONLP0_5 (1 << 28)
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_5 (1 << 29)
#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30)
#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31)
#define DSI_CIO_IRQ_ERROR_MASK \
(DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \
DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRSYNCESC4 | \
DSI_CIO_IRQ_ERRSYNCESC5 | \
DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \
DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRESC4 | \
DSI_CIO_IRQ_ERRESC5 | \
DSI_CIO_IRQ_ERRCONTROL1 | DSI_CIO_IRQ_ERRCONTROL2 | \
DSI_CIO_IRQ_ERRCONTROL3 | DSI_CIO_IRQ_ERRCONTROL4 | \
DSI_CIO_IRQ_ERRCONTROL5 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_4 | DSI_CIO_IRQ_ERRCONTENTIONLP1_4 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_5 | DSI_CIO_IRQ_ERRCONTENTIONLP1_5)
#define DSI_DT_DCS_SHORT_WRITE_0 0x05
#define DSI_DT_DCS_SHORT_WRITE_1 0x15
#define DSI_DT_DCS_READ 0x06
#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37
#define DSI_DT_NULL_PACKET 0x09
#define DSI_DT_DCS_LONG_WRITE 0x39
#define DSI_DT_RX_ACK_WITH_ERR 0x02
#define DSI_DT_RX_DCS_LONG_READ 0x1c
#define DSI_DT_RX_SHORT_READ_1 0x21
#define DSI_DT_RX_SHORT_READ_2 0x22
typedef void (*omap_dsi_isr_t) (void *arg, u32 mask);
#define DSI_MAX_NR_ISRS 2
struct dsi_isr_data {
omap_dsi_isr_t isr;
void *arg;
u32 mask;
};
enum fifo_size {
DSI_FIFO_SIZE_0 = 0,
DSI_FIFO_SIZE_32 = 1,
DSI_FIFO_SIZE_64 = 2,
DSI_FIFO_SIZE_96 = 3,
DSI_FIFO_SIZE_128 = 4,
};
enum dsi_vc_mode {
DSI_VC_MODE_L4 = 0,
DSI_VC_MODE_VP,
};
enum dsi_lane {
DSI_CLK_P = 1 << 0,
DSI_CLK_N = 1 << 1,
DSI_DATA1_P = 1 << 2,
DSI_DATA1_N = 1 << 3,
DSI_DATA2_P = 1 << 4,
DSI_DATA2_N = 1 << 5,
DSI_DATA3_P = 1 << 6,
DSI_DATA3_N = 1 << 7,
DSI_DATA4_P = 1 << 8,
DSI_DATA4_N = 1 << 9,
};
struct dsi_update_region {
u16 x, y, w, h;
struct omap_dss_device *device;
};
struct dsi_irq_stats {
unsigned long last_reset;
unsigned irq_count;
unsigned dsi_irqs[32];
unsigned vc_irqs[4][32];
unsigned cio_irqs[32];
};
struct dsi_isr_tables {
struct dsi_isr_data isr_table[DSI_MAX_NR_ISRS];
struct dsi_isr_data isr_table_vc[4][DSI_MAX_NR_ISRS];
struct dsi_isr_data isr_table_cio[DSI_MAX_NR_ISRS];
};
struct dsi_data {
struct platform_device *pdev;
void __iomem *base;
int irq;
void (*dsi_mux_pads)(bool enable);
struct dsi_clock_info current_cinfo;
bool vdds_dsi_enabled;
struct regulator *vdds_dsi_reg;
struct {
enum dsi_vc_mode mode;
struct omap_dss_device *dssdev;
enum fifo_size fifo_size;
int vc_id;
} vc[4];
struct mutex lock;
struct semaphore bus_lock;
unsigned pll_locked;
spinlock_t irq_lock;
struct dsi_isr_tables isr_tables;
/* space for a copy used by the interrupt handler */
struct dsi_isr_tables isr_tables_copy;
int update_channel;
struct dsi_update_region update_region;
bool te_enabled;
bool ulps_enabled;
void (*framedone_callback)(int, void *);
void *framedone_data;
struct delayed_work framedone_timeout_work;
#ifdef DSI_CATCH_MISSING_TE
struct timer_list te_timer;
#endif
unsigned long cache_req_pck;
unsigned long cache_clk_freq;
struct dsi_clock_info cache_cinfo;
u32 errors;
spinlock_t errors_lock;
#ifdef DEBUG
ktime_t perf_setup_time;
ktime_t perf_start_time;
#endif
int debug_read;
int debug_write;
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
spinlock_t irq_stats_lock;
struct dsi_irq_stats irq_stats;
#endif
/* DSI PLL Parameter Ranges */
unsigned long regm_max, regn_max;
unsigned long regm_dispc_max, regm_dsi_max;
unsigned long fint_min, fint_max;
unsigned long lpdiv_max;
int num_data_lanes;
unsigned scp_clk_refcount;
};
struct dsi_packet_sent_handler_data {
struct platform_device *dsidev;
struct completion *completion;
};
static struct platform_device *dsi_pdev_map[MAX_NUM_DSI];
#ifdef DEBUG
static unsigned int dsi_perf;
module_param_named(dsi_perf, dsi_perf, bool, 0644);
#endif
static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dsidev)
{
return dev_get_drvdata(&dsidev->dev);
}
static inline struct platform_device *dsi_get_dsidev_from_dssdev(struct omap_dss_device *dssdev)
{
return dsi_pdev_map[dssdev->phy.dsi.module];
}
struct platform_device *dsi_get_dsidev_from_id(int module)
{
return dsi_pdev_map[module];
}
static int dsi_get_dsidev_id(struct platform_device *dsidev)
{
/* TEMP: Pass 0 as the dsi module index till the time the dsi platform
* device names aren't changed to the form "omapdss_dsi.0",
* "omapdss_dsi.1" and so on */
BUG_ON(dsidev->id != -1);
return 0;
}
static inline void dsi_write_reg(struct platform_device *dsidev,
const struct dsi_reg idx, u32 val)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
__raw_writel(val, dsi->base + idx.idx);
}
static inline u32 dsi_read_reg(struct platform_device *dsidev,
const struct dsi_reg idx)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
return __raw_readl(dsi->base + idx.idx);
}
void dsi_save_context(void)
{
}
void dsi_restore_context(void)
{
}
void dsi_bus_lock(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
down(&dsi->bus_lock);
}
EXPORT_SYMBOL(dsi_bus_lock);
void dsi_bus_unlock(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
up(&dsi->bus_lock);
}
EXPORT_SYMBOL(dsi_bus_unlock);
static bool dsi_bus_is_locked(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
return dsi->bus_lock.count == 0;
}
static void dsi_completion_handler(void *data, u32 mask)
{
complete((struct completion *)data);
}
static inline int wait_for_bit_change(struct platform_device *dsidev,
const struct dsi_reg idx, int bitnum, int value)
{
int t = 100000;
while (REG_GET(dsidev, idx, bitnum, bitnum) != value) {
if (--t == 0)
return !value;
}
return value;
}
#ifdef DEBUG
static void dsi_perf_mark_setup(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->perf_setup_time = ktime_get();
}
static void dsi_perf_mark_start(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->perf_start_time = ktime_get();
}
static void dsi_perf_show(struct platform_device *dsidev, const char *name)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
ktime_t t, setup_time, trans_time;
u32 total_bytes;
u32 setup_us, trans_us, total_us;
if (!dsi_perf)
return;
t = ktime_get();
setup_time = ktime_sub(dsi->perf_start_time, dsi->perf_setup_time);
setup_us = (u32)ktime_to_us(setup_time);
if (setup_us == 0)
setup_us = 1;
trans_time = ktime_sub(t, dsi->perf_start_time);
trans_us = (u32)ktime_to_us(trans_time);
if (trans_us == 0)
trans_us = 1;
total_us = setup_us + trans_us;
total_bytes = dsi->update_region.w *
dsi->update_region.h *
dsi->update_region.device->ctrl.pixel_size / 8;
printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
"%u bytes, %u kbytes/sec\n",
name,
setup_us,
trans_us,
total_us,
1000*1000 / total_us,
total_bytes,
total_bytes * 1000 / total_us);
}
#else
#define dsi_perf_mark_setup(x)
#define dsi_perf_mark_start(x)
#define dsi_perf_show(x, y)
#endif
static void print_irq_status(u32 status)
{
if (status == 0)
return;
#ifndef VERBOSE_IRQ
if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0)
return;
#endif
printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status);
#define PIS(x) \
if (status & DSI_IRQ_##x) \
printk(#x " ");
#ifdef VERBOSE_IRQ
PIS(VC0);
PIS(VC1);
PIS(VC2);
PIS(VC3);
#endif
PIS(WAKEUP);
PIS(RESYNC);
PIS(PLL_LOCK);
PIS(PLL_UNLOCK);
PIS(PLL_RECALL);
PIS(COMPLEXIO_ERR);
PIS(HS_TX_TIMEOUT);
PIS(LP_RX_TIMEOUT);
PIS(TE_TRIGGER);
PIS(ACK_TRIGGER);
PIS(SYNC_LOST);
PIS(LDO_POWER_GOOD);
PIS(TA_TIMEOUT);
#undef PIS
printk("\n");
}
static void print_irq_status_vc(int channel, u32 status)
{
if (status == 0)
return;
#ifndef VERBOSE_IRQ
if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0)
return;
#endif
printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status);
#define PIS(x) \
if (status & DSI_VC_IRQ_##x) \
printk(#x " ");
PIS(CS);
PIS(ECC_CORR);
#ifdef VERBOSE_IRQ
PIS(PACKET_SENT);
#endif
PIS(FIFO_TX_OVF);
PIS(FIFO_RX_OVF);
PIS(BTA);
PIS(ECC_NO_CORR);
PIS(FIFO_TX_UDF);
PIS(PP_BUSY_CHANGE);
#undef PIS
printk("\n");
}
static void print_irq_status_cio(u32 status)
{
if (status == 0)
return;
printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status);
#define PIS(x) \
if (status & DSI_CIO_IRQ_##x) \
printk(#x " ");
PIS(ERRSYNCESC1);
PIS(ERRSYNCESC2);
PIS(ERRSYNCESC3);
PIS(ERRESC1);
PIS(ERRESC2);
PIS(ERRESC3);
PIS(ERRCONTROL1);
PIS(ERRCONTROL2);
PIS(ERRCONTROL3);
PIS(STATEULPS1);
PIS(STATEULPS2);
PIS(STATEULPS3);
PIS(ERRCONTENTIONLP0_1);
PIS(ERRCONTENTIONLP1_1);
PIS(ERRCONTENTIONLP0_2);
PIS(ERRCONTENTIONLP1_2);
PIS(ERRCONTENTIONLP0_3);
PIS(ERRCONTENTIONLP1_3);
PIS(ULPSACTIVENOT_ALL0);
PIS(ULPSACTIVENOT_ALL1);
#undef PIS
printk("\n");
}
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
static void dsi_collect_irq_stats(struct platform_device *dsidev, u32 irqstatus,
u32 *vcstatus, u32 ciostatus)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int i;
spin_lock(&dsi->irq_stats_lock);
dsi->irq_stats.irq_count++;
dss_collect_irq_stats(irqstatus, dsi->irq_stats.dsi_irqs);
for (i = 0; i < 4; ++i)
dss_collect_irq_stats(vcstatus[i], dsi->irq_stats.vc_irqs[i]);
dss_collect_irq_stats(ciostatus, dsi->irq_stats.cio_irqs);
spin_unlock(&dsi->irq_stats_lock);
}
#else
#define dsi_collect_irq_stats(dsidev, irqstatus, vcstatus, ciostatus)
#endif
static int debug_irq;
static void dsi_handle_irq_errors(struct platform_device *dsidev, u32 irqstatus,
u32 *vcstatus, u32 ciostatus)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int i;
if (irqstatus & DSI_IRQ_ERROR_MASK) {
DSSERR("DSI error, irqstatus %x\n", irqstatus);
print_irq_status(irqstatus);
spin_lock(&dsi->errors_lock);
dsi->errors |= irqstatus & DSI_IRQ_ERROR_MASK;
spin_unlock(&dsi->errors_lock);
} else if (debug_irq) {
print_irq_status(irqstatus);
}
for (i = 0; i < 4; ++i) {
if (vcstatus[i] & DSI_VC_IRQ_ERROR_MASK) {
DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
i, vcstatus[i]);
print_irq_status_vc(i, vcstatus[i]);
} else if (debug_irq) {
print_irq_status_vc(i, vcstatus[i]);
}
}
if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) {
DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
print_irq_status_cio(ciostatus);
} else if (debug_irq) {
print_irq_status_cio(ciostatus);
}
}
static void dsi_call_isrs(struct dsi_isr_data *isr_array,
unsigned isr_array_size, u32 irqstatus)
{
struct dsi_isr_data *isr_data;
int i;
for (i = 0; i < isr_array_size; i++) {
isr_data = &isr_array[i];
if (isr_data->isr && isr_data->mask & irqstatus)
isr_data->isr(isr_data->arg, irqstatus);
}
}
static void dsi_handle_isrs(struct dsi_isr_tables *isr_tables,
u32 irqstatus, u32 *vcstatus, u32 ciostatus)
{
int i;
dsi_call_isrs(isr_tables->isr_table,
ARRAY_SIZE(isr_tables->isr_table),
irqstatus);
for (i = 0; i < 4; ++i) {
if (vcstatus[i] == 0)
continue;
dsi_call_isrs(isr_tables->isr_table_vc[i],
ARRAY_SIZE(isr_tables->isr_table_vc[i]),
vcstatus[i]);
}
if (ciostatus != 0)
dsi_call_isrs(isr_tables->isr_table_cio,
ARRAY_SIZE(isr_tables->isr_table_cio),
ciostatus);
}
static irqreturn_t omap_dsi_irq_handler(int irq, void *arg)
{
struct platform_device *dsidev;
struct dsi_data *dsi;
u32 irqstatus, vcstatus[4], ciostatus;
int i;
dsidev = (struct platform_device *) arg;
dsi = dsi_get_dsidrv_data(dsidev);
spin_lock(&dsi->irq_lock);
irqstatus = dsi_read_reg(dsidev, DSI_IRQSTATUS);
/* IRQ is not for us */
if (!irqstatus) {
spin_unlock(&dsi->irq_lock);
return IRQ_NONE;
}
dsi_write_reg(dsidev, DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
/* flush posted write */
dsi_read_reg(dsidev, DSI_IRQSTATUS);
for (i = 0; i < 4; ++i) {
if ((irqstatus & (1 << i)) == 0) {
vcstatus[i] = 0;
continue;
}
vcstatus[i] = dsi_read_reg(dsidev, DSI_VC_IRQSTATUS(i));
dsi_write_reg(dsidev, DSI_VC_IRQSTATUS(i), vcstatus[i]);
/* flush posted write */
dsi_read_reg(dsidev, DSI_VC_IRQSTATUS(i));
}
if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) {
ciostatus = dsi_read_reg(dsidev, DSI_COMPLEXIO_IRQ_STATUS);
dsi_write_reg(dsidev, DSI_COMPLEXIO_IRQ_STATUS, ciostatus);
/* flush posted write */
dsi_read_reg(dsidev, DSI_COMPLEXIO_IRQ_STATUS);
} else {
ciostatus = 0;
}
#ifdef DSI_CATCH_MISSING_TE
if (irqstatus & DSI_IRQ_TE_TRIGGER)
del_timer(&dsi->te_timer);
#endif
/* make a copy and unlock, so that isrs can unregister
* themselves */
memcpy(&dsi->isr_tables_copy, &dsi->isr_tables,
sizeof(dsi->isr_tables));
spin_unlock(&dsi->irq_lock);
dsi_handle_isrs(&dsi->isr_tables_copy, irqstatus, vcstatus, ciostatus);
dsi_handle_irq_errors(dsidev, irqstatus, vcstatus, ciostatus);
dsi_collect_irq_stats(dsidev, irqstatus, vcstatus, ciostatus);
return IRQ_HANDLED;
}
/* dsi->irq_lock has to be locked by the caller */
static void _omap_dsi_configure_irqs(struct platform_device *dsidev,
struct dsi_isr_data *isr_array,
unsigned isr_array_size, u32 default_mask,
const struct dsi_reg enable_reg,
const struct dsi_reg status_reg)
{
struct dsi_isr_data *isr_data;
u32 mask;
u32 old_mask;
int i;
mask = default_mask;
for (i = 0; i < isr_array_size; i++) {
isr_data = &isr_array[i];
if (isr_data->isr == NULL)
continue;
mask |= isr_data->mask;
}
old_mask = dsi_read_reg(dsidev, enable_reg);
/* clear the irqstatus for newly enabled irqs */
dsi_write_reg(dsidev, status_reg, (mask ^ old_mask) & mask);
dsi_write_reg(dsidev, enable_reg, mask);
/* flush posted writes */
dsi_read_reg(dsidev, enable_reg);
dsi_read_reg(dsidev, status_reg);
}
/* dsi->irq_lock has to be locked by the caller */
static void _omap_dsi_set_irqs(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 mask = DSI_IRQ_ERROR_MASK;
#ifdef DSI_CATCH_MISSING_TE
mask |= DSI_IRQ_TE_TRIGGER;
#endif
_omap_dsi_configure_irqs(dsidev, dsi->isr_tables.isr_table,
ARRAY_SIZE(dsi->isr_tables.isr_table), mask,
DSI_IRQENABLE, DSI_IRQSTATUS);
}
/* dsi->irq_lock has to be locked by the caller */
static void _omap_dsi_set_irqs_vc(struct platform_device *dsidev, int vc)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
_omap_dsi_configure_irqs(dsidev, dsi->isr_tables.isr_table_vc[vc],
ARRAY_SIZE(dsi->isr_tables.isr_table_vc[vc]),
DSI_VC_IRQ_ERROR_MASK,
DSI_VC_IRQENABLE(vc), DSI_VC_IRQSTATUS(vc));
}
/* dsi->irq_lock has to be locked by the caller */
static void _omap_dsi_set_irqs_cio(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
_omap_dsi_configure_irqs(dsidev, dsi->isr_tables.isr_table_cio,
ARRAY_SIZE(dsi->isr_tables.isr_table_cio),
DSI_CIO_IRQ_ERROR_MASK,
DSI_COMPLEXIO_IRQ_ENABLE, DSI_COMPLEXIO_IRQ_STATUS);
}
static void _dsi_initialize_irq(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int vc;
spin_lock_irqsave(&dsi->irq_lock, flags);
memset(&dsi->isr_tables, 0, sizeof(dsi->isr_tables));
_omap_dsi_set_irqs(dsidev);
for (vc = 0; vc < 4; ++vc)
_omap_dsi_set_irqs_vc(dsidev, vc);
_omap_dsi_set_irqs_cio(dsidev);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
}
static int _dsi_register_isr(omap_dsi_isr_t isr, void *arg, u32 mask,
struct dsi_isr_data *isr_array, unsigned isr_array_size)
{
struct dsi_isr_data *isr_data;
int free_idx;
int i;
BUG_ON(isr == NULL);
/* check for duplicate entry and find a free slot */
free_idx = -1;
for (i = 0; i < isr_array_size; i++) {
isr_data = &isr_array[i];
if (isr_data->isr == isr && isr_data->arg == arg &&
isr_data->mask == mask) {
return -EINVAL;
}
if (isr_data->isr == NULL && free_idx == -1)
free_idx = i;
}
if (free_idx == -1)
return -EBUSY;
isr_data = &isr_array[free_idx];
isr_data->isr = isr;
isr_data->arg = arg;
isr_data->mask = mask;
return 0;
}
static int _dsi_unregister_isr(omap_dsi_isr_t isr, void *arg, u32 mask,
struct dsi_isr_data *isr_array, unsigned isr_array_size)
{
struct dsi_isr_data *isr_data;
int i;
for (i = 0; i < isr_array_size; i++) {
isr_data = &isr_array[i];
if (isr_data->isr != isr || isr_data->arg != arg ||
isr_data->mask != mask)
continue;
isr_data->isr = NULL;
isr_data->arg = NULL;
isr_data->mask = 0;
return 0;
}
return -EINVAL;
}
static int dsi_register_isr(struct platform_device *dsidev, omap_dsi_isr_t isr,
void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_register_isr(isr, arg, mask, dsi->isr_tables.isr_table,
ARRAY_SIZE(dsi->isr_tables.isr_table));
if (r == 0)
_omap_dsi_set_irqs(dsidev);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static int dsi_unregister_isr(struct platform_device *dsidev,
omap_dsi_isr_t isr, void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_unregister_isr(isr, arg, mask, dsi->isr_tables.isr_table,
ARRAY_SIZE(dsi->isr_tables.isr_table));
if (r == 0)
_omap_dsi_set_irqs(dsidev);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static int dsi_register_isr_vc(struct platform_device *dsidev, int channel,
omap_dsi_isr_t isr, void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_register_isr(isr, arg, mask,
dsi->isr_tables.isr_table_vc[channel],
ARRAY_SIZE(dsi->isr_tables.isr_table_vc[channel]));
if (r == 0)
_omap_dsi_set_irqs_vc(dsidev, channel);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static int dsi_unregister_isr_vc(struct platform_device *dsidev, int channel,
omap_dsi_isr_t isr, void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_unregister_isr(isr, arg, mask,
dsi->isr_tables.isr_table_vc[channel],
ARRAY_SIZE(dsi->isr_tables.isr_table_vc[channel]));
if (r == 0)
_omap_dsi_set_irqs_vc(dsidev, channel);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static int dsi_register_isr_cio(struct platform_device *dsidev,
omap_dsi_isr_t isr, void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_register_isr(isr, arg, mask, dsi->isr_tables.isr_table_cio,
ARRAY_SIZE(dsi->isr_tables.isr_table_cio));
if (r == 0)
_omap_dsi_set_irqs_cio(dsidev);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static int dsi_unregister_isr_cio(struct platform_device *dsidev,
omap_dsi_isr_t isr, void *arg, u32 mask)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
int r;
spin_lock_irqsave(&dsi->irq_lock, flags);
r = _dsi_unregister_isr(isr, arg, mask, dsi->isr_tables.isr_table_cio,
ARRAY_SIZE(dsi->isr_tables.isr_table_cio));
if (r == 0)
_omap_dsi_set_irqs_cio(dsidev);
spin_unlock_irqrestore(&dsi->irq_lock, flags);
return r;
}
static u32 dsi_get_errors(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
u32 e;
spin_lock_irqsave(&dsi->errors_lock, flags);
e = dsi->errors;
dsi->errors = 0;
spin_unlock_irqrestore(&dsi->errors_lock, flags);
return e;
}
/* DSI func clock. this could also be dsi_pll_hsdiv_dsi_clk */
static inline void enable_clocks(bool enable)
{
if (enable)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
else
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
static inline void dsi_enable_pll_clock(struct platform_device *dsidev,
bool enable)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (enable)
dss_clk_enable(DSS_CLK_SYSCK);
else
dss_clk_disable(DSS_CLK_SYSCK);
if (enable && dsi->pll_locked) {
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 1, 1) != 1)
DSSERR("cannot lock PLL when enabling clocks\n");
}
}
#ifdef DEBUG
static void _dsi_print_reset_status(struct platform_device *dsidev)
{
u32 l;
int b0, b1, b2;
if (!dss_debug)
return;
/* A dummy read using the SCP interface to any DSIPHY register is
* required after DSIPHY reset to complete the reset of the DSI complex
* I/O. */
l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
printk(KERN_DEBUG "DSI resets: ");
l = dsi_read_reg(dsidev, DSI_PLL_STATUS);
printk("PLL (%d) ", FLD_GET(l, 0, 0));
l = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1);
printk("CIO (%d) ", FLD_GET(l, 29, 29));
if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) {
b0 = 28;
b1 = 27;
b2 = 26;
} else {
b0 = 24;
b1 = 25;
b2 = 26;
}
l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
printk("PHY (%x%x%x, %d, %d, %d)\n",
FLD_GET(l, b0, b0),
FLD_GET(l, b1, b1),
FLD_GET(l, b2, b2),
FLD_GET(l, 29, 29),
FLD_GET(l, 30, 30),
FLD_GET(l, 31, 31));
}
#else
#define _dsi_print_reset_status(x)
#endif
static inline int dsi_if_enable(struct platform_device *dsidev, bool enable)
{
DSSDBG("dsi_if_enable(%d)\n", enable);
enable = enable ? 1 : 0;
REG_FLD_MOD(dsidev, DSI_CTRL, enable, 0, 0); /* IF_EN */
if (wait_for_bit_change(dsidev, DSI_CTRL, 0, enable) != enable) {
DSSERR("Failed to set dsi_if_enable to %d\n", enable);
return -EIO;
}
return 0;
}
unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
return dsi->current_cinfo.dsi_pll_hsdiv_dispc_clk;
}
static unsigned long dsi_get_pll_hsdiv_dsi_rate(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
return dsi->current_cinfo.dsi_pll_hsdiv_dsi_clk;
}
static unsigned long dsi_get_txbyteclkhs(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
return dsi->current_cinfo.clkin4ddr / 16;
}
static unsigned long dsi_fclk_rate(struct platform_device *dsidev)
{
unsigned long r;
int dsi_module = dsi_get_dsidev_id(dsidev);
if (dss_get_dsi_clk_source(dsi_module) == OMAP_DSS_CLK_SRC_FCK) {
/* DSI FCLK source is DSS_CLK_FCK */
r = dss_clk_get_rate(DSS_CLK_FCK);
} else {
/* DSI FCLK source is dsi_pll_hsdiv_dsi_clk */
r = dsi_get_pll_hsdiv_dsi_rate(dsidev);
}
return r;
}
static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long dsi_fclk;
unsigned lp_clk_div;
unsigned long lp_clk;
lp_clk_div = dssdev->clocks.dsi.lp_clk_div;
if (lp_clk_div == 0 || lp_clk_div > dsi->lpdiv_max)
return -EINVAL;
dsi_fclk = dsi_fclk_rate(dsidev);
lp_clk = dsi_fclk / 2 / lp_clk_div;
DSSDBG("LP_CLK_DIV %u, LP_CLK %lu\n", lp_clk_div, lp_clk);
dsi->current_cinfo.lp_clk = lp_clk;
dsi->current_cinfo.lp_clk_div = lp_clk_div;
/* LP_CLK_DIVISOR */
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, lp_clk_div, 12, 0);
/* LP_RX_SYNCHRO_ENABLE */
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, dsi_fclk > 30000000 ? 1 : 0, 21, 21);
return 0;
}
static void dsi_enable_scp_clk(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dsi->scp_clk_refcount++ == 0)
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 14, 14); /* CIO_CLK_ICG */
}
static void dsi_disable_scp_clk(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
WARN_ON(dsi->scp_clk_refcount == 0);
if (--dsi->scp_clk_refcount == 0)
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 14, 14); /* CIO_CLK_ICG */
}
enum dsi_pll_power_state {
DSI_PLL_POWER_OFF = 0x0,
DSI_PLL_POWER_ON_HSCLK = 0x1,
DSI_PLL_POWER_ON_ALL = 0x2,
DSI_PLL_POWER_ON_DIV = 0x3,
};
static int dsi_pll_power(struct platform_device *dsidev,
enum dsi_pll_power_state state)
{
int t = 0;
/* DSI-PLL power command 0x3 is not working */
if (dss_has_feature(FEAT_DSI_PLL_PWR_BUG) &&
state == DSI_PLL_POWER_ON_DIV)
state = DSI_PLL_POWER_ON_ALL;
/* PLL_PWR_CMD */
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, state, 31, 30);
/* PLL_PWR_STATUS */
while (FLD_GET(dsi_read_reg(dsidev, DSI_CLK_CTRL), 29, 28) != state) {
if (++t > 1000) {
DSSERR("Failed to set DSI PLL power mode to %d\n",
state);
return -ENODEV;
}
udelay(1);
}
return 0;
}
/* calculate clock rates using dividers in cinfo */
static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
struct dsi_clock_info *cinfo)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (cinfo->regn == 0 || cinfo->regn > dsi->regn_max)
return -EINVAL;
if (cinfo->regm == 0 || cinfo->regm > dsi->regm_max)
return -EINVAL;
if (cinfo->regm_dispc > dsi->regm_dispc_max)
return -EINVAL;
if (cinfo->regm_dsi > dsi->regm_dsi_max)
return -EINVAL;
if (cinfo->use_sys_clk) {
cinfo->clkin = dss_clk_get_rate(DSS_CLK_SYSCK);
/* XXX it is unclear if highfreq should be used
* with DSS_SYS_CLK source also */
cinfo->highfreq = 0;
} else {
cinfo->clkin = dispc_pclk_rate(dssdev->manager->id);
if (cinfo->clkin < 32000000)
cinfo->highfreq = 0;
else
cinfo->highfreq = 1;
}
cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1));
if (cinfo->fint > dsi->fint_max || cinfo->fint < dsi->fint_min)
return -EINVAL;
cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint;
if (cinfo->clkin4ddr > 1800 * 1000 * 1000)
return -EINVAL;
if (cinfo->regm_dispc > 0)
cinfo->dsi_pll_hsdiv_dispc_clk =
cinfo->clkin4ddr / cinfo->regm_dispc;
else
cinfo->dsi_pll_hsdiv_dispc_clk = 0;
if (cinfo->regm_dsi > 0)
cinfo->dsi_pll_hsdiv_dsi_clk =
cinfo->clkin4ddr / cinfo->regm_dsi;
else
cinfo->dsi_pll_hsdiv_dsi_clk = 0;
return 0;
}
int dsi_pll_calc_clock_div_pck(struct platform_device *dsidev, bool is_tft,
unsigned long req_pck, struct dsi_clock_info *dsi_cinfo,
struct dispc_clock_info *dispc_cinfo)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct dsi_clock_info cur, best;
struct dispc_clock_info best_dispc;
int min_fck_per_pck;
int match = 0;
unsigned long dss_sys_clk, max_dss_fck;
dss_sys_clk = dss_clk_get_rate(DSS_CLK_SYSCK);
max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
if (req_pck == dsi->cache_req_pck &&
dsi->cache_cinfo.clkin == dss_sys_clk) {
DSSDBG("DSI clock info found from cache\n");
*dsi_cinfo = dsi->cache_cinfo;
dispc_find_clk_divs(is_tft, req_pck,
dsi_cinfo->dsi_pll_hsdiv_dispc_clk, dispc_cinfo);
return 0;
}
min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
if (min_fck_per_pck &&
req_pck * min_fck_per_pck > max_dss_fck) {
DSSERR("Requested pixel clock not possible with the current "
"OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
"the constraint off.\n");
min_fck_per_pck = 0;
}
DSSDBG("dsi_pll_calc\n");
retry:
memset(&best, 0, sizeof(best));
memset(&best_dispc, 0, sizeof(best_dispc));
memset(&cur, 0, sizeof(cur));
cur.clkin = dss_sys_clk;
cur.use_sys_clk = 1;
cur.highfreq = 0;
/* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
/* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
/* To reduce PLL lock time, keep Fint high (around 2 MHz) */
for (cur.regn = 1; cur.regn < dsi->regn_max; ++cur.regn) {
if (cur.highfreq == 0)
cur.fint = cur.clkin / cur.regn;
else
cur.fint = cur.clkin / (2 * cur.regn);
if (cur.fint > dsi->fint_max || cur.fint < dsi->fint_min)
continue;
/* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
for (cur.regm = 1; cur.regm < dsi->regm_max; ++cur.regm) {
unsigned long a, b;
a = 2 * cur.regm * (cur.clkin/1000);
b = cur.regn * (cur.highfreq + 1);
cur.clkin4ddr = a / b * 1000;
if (cur.clkin4ddr > 1800 * 1000 * 1000)
break;
/* dsi_pll_hsdiv_dispc_clk(MHz) =
* DSIPHY(MHz) / regm_dispc < 173MHz/186Mhz */
for (cur.regm_dispc = 1; cur.regm_dispc <
dsi->regm_dispc_max; ++cur.regm_dispc) {
struct dispc_clock_info cur_dispc;
cur.dsi_pll_hsdiv_dispc_clk =
cur.clkin4ddr / cur.regm_dispc;
/* this will narrow down the search a bit,
* but still give pixclocks below what was
* requested */
if (cur.dsi_pll_hsdiv_dispc_clk < req_pck)
break;
if (cur.dsi_pll_hsdiv_dispc_clk > max_dss_fck)
continue;
if (min_fck_per_pck &&
cur.dsi_pll_hsdiv_dispc_clk <
req_pck * min_fck_per_pck)
continue;
match = 1;
dispc_find_clk_divs(is_tft, req_pck,
cur.dsi_pll_hsdiv_dispc_clk,
&cur_dispc);
if (abs(cur_dispc.pck - req_pck) <
abs(best_dispc.pck - req_pck)) {
best = cur;
best_dispc = cur_dispc;
if (cur_dispc.pck == req_pck)
goto found;
}
}
}
}
found:
if (!match) {
if (min_fck_per_pck) {
DSSERR("Could not find suitable clock settings.\n"
"Turning FCK/PCK constraint off and"
"trying again.\n");
min_fck_per_pck = 0;
goto retry;
}
DSSERR("Could not find suitable clock settings.\n");
return -EINVAL;
}
/* dsi_pll_hsdiv_dsi_clk (regm_dsi) is not used */
best.regm_dsi = 0;
best.dsi_pll_hsdiv_dsi_clk = 0;
if (dsi_cinfo)
*dsi_cinfo = best;
if (dispc_cinfo)
*dispc_cinfo = best_dispc;
dsi->cache_req_pck = req_pck;
dsi->cache_clk_freq = 0;
dsi->cache_cinfo = best;
return 0;
}
int dsi_pll_set_clock_div(struct platform_device *dsidev,
struct dsi_clock_info *cinfo)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int r = 0;
u32 l;
int f = 0;
u8 regn_start, regn_end, regm_start, regm_end;
u8 regm_dispc_start, regm_dispc_end, regm_dsi_start, regm_dsi_end;
DSSDBGF();
dsi->current_cinfo.use_sys_clk = cinfo->use_sys_clk;
dsi->current_cinfo.highfreq = cinfo->highfreq;
dsi->current_cinfo.fint = cinfo->fint;
dsi->current_cinfo.clkin4ddr = cinfo->clkin4ddr;
dsi->current_cinfo.dsi_pll_hsdiv_dispc_clk =
cinfo->dsi_pll_hsdiv_dispc_clk;
dsi->current_cinfo.dsi_pll_hsdiv_dsi_clk =
cinfo->dsi_pll_hsdiv_dsi_clk;
dsi->current_cinfo.regn = cinfo->regn;
dsi->current_cinfo.regm = cinfo->regm;
dsi->current_cinfo.regm_dispc = cinfo->regm_dispc;
dsi->current_cinfo.regm_dsi = cinfo->regm_dsi;
DSSDBG("DSI Fint %ld\n", cinfo->fint);
DSSDBG("clkin (%s) rate %ld, highfreq %d\n",
cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree",
cinfo->clkin,
cinfo->highfreq);
/* DSIPHY == CLKIN4DDR */
DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n",
cinfo->regm,
cinfo->regn,
cinfo->clkin,
cinfo->highfreq + 1,
cinfo->clkin4ddr);
DSSDBG("Data rate on 1 DSI lane %ld Mbps\n",
cinfo->clkin4ddr / 1000 / 1000 / 2);
DSSDBG("Clock lane freq %ld Hz\n", cinfo->clkin4ddr / 4);
DSSDBG("regm_dispc = %d, %s (%s) = %lu\n", cinfo->regm_dispc,
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC),
cinfo->dsi_pll_hsdiv_dispc_clk);
DSSDBG("regm_dsi = %d, %s (%s) = %lu\n", cinfo->regm_dsi,
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI),
cinfo->dsi_pll_hsdiv_dsi_clk);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGN, &regn_start, &regn_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM, &regm_start, &regm_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM_DISPC, &regm_dispc_start,
&regm_dispc_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM_DSI, &regm_dsi_start,
&regm_dsi_end);
/* DSI_PLL_AUTOMODE = manual */
REG_FLD_MOD(dsidev, DSI_PLL_CONTROL, 0, 0, 0);
l = dsi_read_reg(dsidev, DSI_PLL_CONFIGURATION1);
l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */
/* DSI_PLL_REGN */
l = FLD_MOD(l, cinfo->regn - 1, regn_start, regn_end);
/* DSI_PLL_REGM */
l = FLD_MOD(l, cinfo->regm, regm_start, regm_end);
/* DSI_CLOCK_DIV */
l = FLD_MOD(l, cinfo->regm_dispc > 0 ? cinfo->regm_dispc - 1 : 0,
regm_dispc_start, regm_dispc_end);
/* DSIPROTO_CLOCK_DIV */
l = FLD_MOD(l, cinfo->regm_dsi > 0 ? cinfo->regm_dsi - 1 : 0,
regm_dsi_start, regm_dsi_end);
dsi_write_reg(dsidev, DSI_PLL_CONFIGURATION1, l);
BUG_ON(cinfo->fint < dsi->fint_min || cinfo->fint > dsi->fint_max);
if (dss_has_feature(FEAT_DSI_PLL_FREQSEL)) {
f = cinfo->fint < 1000000 ? 0x3 :
cinfo->fint < 1250000 ? 0x4 :
cinfo->fint < 1500000 ? 0x5 :
cinfo->fint < 1750000 ? 0x6 :
0x7;
}
l = dsi_read_reg(dsidev, DSI_PLL_CONFIGURATION2);
if (dss_has_feature(FEAT_DSI_PLL_FREQSEL))
l = FLD_MOD(l, f, 4, 1); /* DSI_PLL_FREQSEL */
l = FLD_MOD(l, cinfo->use_sys_clk ? 0 : 1,
11, 11); /* DSI_PLL_CLKSEL */
l = FLD_MOD(l, cinfo->highfreq,
12, 12); /* DSI_PLL_HIGHFREQ */
l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */
l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */
dsi_write_reg(dsidev, DSI_PLL_CONFIGURATION2, l);
REG_FLD_MOD(dsidev, DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */
if (wait_for_bit_change(dsidev, DSI_PLL_GO, 0, 0) != 0) {
DSSERR("dsi pll go bit not going down.\n");
r = -EIO;
goto err;
}
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 1, 1) != 1) {
DSSERR("cannot lock PLL\n");
r = -EIO;
goto err;
}
dsi->pll_locked = 1;
l = dsi_read_reg(dsidev, DSI_PLL_CONFIGURATION2);
l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */
l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */
l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */
l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */
l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */
l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */
l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */
l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */
l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */
l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */
l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */
l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */
l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */
dsi_write_reg(dsidev, DSI_PLL_CONFIGURATION2, l);
DSSDBG("PLL config done\n");
err:
return r;
}
int dsi_pll_init(struct platform_device *dsidev, bool enable_hsclk,
bool enable_hsdiv)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int r = 0;
enum dsi_pll_power_state pwstate;
DSSDBG("PLL init\n");
if (dsi->vdds_dsi_reg == NULL) {
struct regulator *vdds_dsi;
vdds_dsi = regulator_get(&dsi->pdev->dev, "vdds_dsi");
if (IS_ERR(vdds_dsi)) {
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
}
dsi->vdds_dsi_reg = vdds_dsi;
}
enable_clocks(1);
dsi_enable_pll_clock(dsidev, 1);
/*
* Note: SCP CLK is not required on OMAP3, but it is required on OMAP4.
*/
dsi_enable_scp_clk(dsidev);
if (!dsi->vdds_dsi_enabled) {
r = regulator_enable(dsi->vdds_dsi_reg);
if (r)
goto err0;
dsi->vdds_dsi_enabled = true;
}
/* XXX PLL does not come out of reset without this... */
dispc_pck_free_enable(1);
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 0, 1) != 1) {
DSSERR("PLL not coming out of reset.\n");
r = -ENODEV;
dispc_pck_free_enable(0);
goto err1;
}
/* XXX ... but if left on, we get problems when planes do not
* fill the whole display. No idea about this */
dispc_pck_free_enable(0);
if (enable_hsclk && enable_hsdiv)
pwstate = DSI_PLL_POWER_ON_ALL;
else if (enable_hsclk)
pwstate = DSI_PLL_POWER_ON_HSCLK;
else if (enable_hsdiv)
pwstate = DSI_PLL_POWER_ON_DIV;
else
pwstate = DSI_PLL_POWER_OFF;
r = dsi_pll_power(dsidev, pwstate);
if (r)
goto err1;
DSSDBG("PLL init done\n");
return 0;
err1:
if (dsi->vdds_dsi_enabled) {
regulator_disable(dsi->vdds_dsi_reg);
dsi->vdds_dsi_enabled = false;
}
err0:
dsi_disable_scp_clk(dsidev);
enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
return r;
}
void dsi_pll_uninit(struct platform_device *dsidev, bool disconnect_lanes)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->pll_locked = 0;
dsi_pll_power(dsidev, DSI_PLL_POWER_OFF);
if (disconnect_lanes) {
WARN_ON(!dsi->vdds_dsi_enabled);
regulator_disable(dsi->vdds_dsi_reg);
dsi->vdds_dsi_enabled = false;
}
dsi_disable_scp_clk(dsidev);
enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
DSSDBG("PLL uninit done\n");
}
static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
struct seq_file *s)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct dsi_clock_info *cinfo = &dsi->current_cinfo;
enum omap_dss_clk_source dispc_clk_src, dsi_clk_src;
int dsi_module = dsi_get_dsidev_id(dsidev);
dispc_clk_src = dss_get_dispc_clk_source();
dsi_clk_src = dss_get_dsi_clk_source(dsi_module);
enable_clocks(1);
seq_printf(s, "- DSI%d PLL -\n", dsi_module + 1);
seq_printf(s, "dsi pll source = %s\n",
cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree");
seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn);
seq_printf(s, "CLKIN4DDR\t%-16luregm %u\n",
cinfo->clkin4ddr, cinfo->regm);
seq_printf(s, "%s (%s)\t%-16luregm_dispc %u\t(%s)\n",
dss_get_generic_clk_source_name(dispc_clk_src),
dss_feat_get_clk_source_name(dispc_clk_src),
cinfo->dsi_pll_hsdiv_dispc_clk,
cinfo->regm_dispc,
dispc_clk_src == OMAP_DSS_CLK_SRC_FCK ?
"off" : "on");
seq_printf(s, "%s (%s)\t%-16luregm_dsi %u\t(%s)\n",
dss_get_generic_clk_source_name(dsi_clk_src),
dss_feat_get_clk_source_name(dsi_clk_src),
cinfo->dsi_pll_hsdiv_dsi_clk,
cinfo->regm_dsi,
dsi_clk_src == OMAP_DSS_CLK_SRC_FCK ?
"off" : "on");
seq_printf(s, "- DSI%d -\n", dsi_module + 1);
seq_printf(s, "dsi fclk source = %s (%s)\n",
dss_get_generic_clk_source_name(dsi_clk_src),
dss_feat_get_clk_source_name(dsi_clk_src));
seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate(dsidev));
seq_printf(s, "DDR_CLK\t\t%lu\n",
cinfo->clkin4ddr / 4);
seq_printf(s, "TxByteClkHS\t%lu\n", dsi_get_txbyteclkhs(dsidev));
seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk);
enable_clocks(0);
}
void dsi_dump_clocks(struct seq_file *s)
{
struct platform_device *dsidev;
int i;
for (i = 0; i < MAX_NUM_DSI; i++) {
dsidev = dsi_get_dsidev_from_id(i);
if (dsidev)
dsi_dump_dsidev_clocks(dsidev, s);
}
}
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
static void dsi_dump_dsidev_irqs(struct platform_device *dsidev,
struct seq_file *s)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long flags;
struct dsi_irq_stats stats;
int dsi_module = dsi_get_dsidev_id(dsidev);
spin_lock_irqsave(&dsi->irq_stats_lock, flags);
stats = dsi->irq_stats;
memset(&dsi->irq_stats, 0, sizeof(dsi->irq_stats));
dsi->irq_stats.last_reset = jiffies;
spin_unlock_irqrestore(&dsi->irq_stats_lock, flags);
seq_printf(s, "period %u ms\n",
jiffies_to_msecs(jiffies - stats.last_reset));
seq_printf(s, "irqs %d\n", stats.irq_count);
#define PIS(x) \
seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]);
seq_printf(s, "-- DSI%d interrupts --\n", dsi_module + 1);
PIS(VC0);
PIS(VC1);
PIS(VC2);
PIS(VC3);
PIS(WAKEUP);
PIS(RESYNC);
PIS(PLL_LOCK);
PIS(PLL_UNLOCK);
PIS(PLL_RECALL);
PIS(COMPLEXIO_ERR);
PIS(HS_TX_TIMEOUT);
PIS(LP_RX_TIMEOUT);
PIS(TE_TRIGGER);
PIS(ACK_TRIGGER);
PIS(SYNC_LOST);
PIS(LDO_POWER_GOOD);
PIS(TA_TIMEOUT);
#undef PIS
#define PIS(x) \
seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \
stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \
stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \
stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \
stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]);
seq_printf(s, "-- VC interrupts --\n");
PIS(CS);
PIS(ECC_CORR);
PIS(PACKET_SENT);
PIS(FIFO_TX_OVF);
PIS(FIFO_RX_OVF);
PIS(BTA);
PIS(ECC_NO_CORR);
PIS(FIFO_TX_UDF);
PIS(PP_BUSY_CHANGE);
#undef PIS
#define PIS(x) \
seq_printf(s, "%-20s %10d\n", #x, \
stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]);
seq_printf(s, "-- CIO interrupts --\n");
PIS(ERRSYNCESC1);
PIS(ERRSYNCESC2);
PIS(ERRSYNCESC3);
PIS(ERRESC1);
PIS(ERRESC2);
PIS(ERRESC3);
PIS(ERRCONTROL1);
PIS(ERRCONTROL2);
PIS(ERRCONTROL3);
PIS(STATEULPS1);
PIS(STATEULPS2);
PIS(STATEULPS3);
PIS(ERRCONTENTIONLP0_1);
PIS(ERRCONTENTIONLP1_1);
PIS(ERRCONTENTIONLP0_2);
PIS(ERRCONTENTIONLP1_2);
PIS(ERRCONTENTIONLP0_3);
PIS(ERRCONTENTIONLP1_3);
PIS(ULPSACTIVENOT_ALL0);
PIS(ULPSACTIVENOT_ALL1);
#undef PIS
}
static void dsi1_dump_irqs(struct seq_file *s)
{
struct platform_device *dsidev = dsi_get_dsidev_from_id(0);
dsi_dump_dsidev_irqs(dsidev, s);
}
static void dsi2_dump_irqs(struct seq_file *s)
{
struct platform_device *dsidev = dsi_get_dsidev_from_id(1);
dsi_dump_dsidev_irqs(dsidev, s);
}
void dsi_create_debugfs_files_irq(struct dentry *debugfs_dir,
const struct file_operations *debug_fops)
{
struct platform_device *dsidev;
dsidev = dsi_get_dsidev_from_id(0);
if (dsidev)
debugfs_create_file("dsi1_irqs", S_IRUGO, debugfs_dir,
&dsi1_dump_irqs, debug_fops);
dsidev = dsi_get_dsidev_from_id(1);
if (dsidev)
debugfs_create_file("dsi2_irqs", S_IRUGO, debugfs_dir,
&dsi2_dump_irqs, debug_fops);
}
#endif
static void dsi_dump_dsidev_regs(struct platform_device *dsidev,
struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(dsidev, r))
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
dsi_enable_scp_clk(dsidev);
DUMPREG(DSI_REVISION);
DUMPREG(DSI_SYSCONFIG);
DUMPREG(DSI_SYSSTATUS);
DUMPREG(DSI_IRQSTATUS);
DUMPREG(DSI_IRQENABLE);
DUMPREG(DSI_CTRL);
DUMPREG(DSI_COMPLEXIO_CFG1);
DUMPREG(DSI_COMPLEXIO_IRQ_STATUS);
DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE);
DUMPREG(DSI_CLK_CTRL);
DUMPREG(DSI_TIMING1);
DUMPREG(DSI_TIMING2);
DUMPREG(DSI_VM_TIMING1);
DUMPREG(DSI_VM_TIMING2);
DUMPREG(DSI_VM_TIMING3);
DUMPREG(DSI_CLK_TIMING);
DUMPREG(DSI_TX_FIFO_VC_SIZE);
DUMPREG(DSI_RX_FIFO_VC_SIZE);
DUMPREG(DSI_COMPLEXIO_CFG2);
DUMPREG(DSI_RX_FIFO_VC_FULLNESS);
DUMPREG(DSI_VM_TIMING4);
DUMPREG(DSI_TX_FIFO_VC_EMPTINESS);
DUMPREG(DSI_VM_TIMING5);
DUMPREG(DSI_VM_TIMING6);
DUMPREG(DSI_VM_TIMING7);
DUMPREG(DSI_STOPCLK_TIMING);
DUMPREG(DSI_VC_CTRL(0));
DUMPREG(DSI_VC_TE(0));
DUMPREG(DSI_VC_LONG_PACKET_HEADER(0));
DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0));
DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0));
DUMPREG(DSI_VC_IRQSTATUS(0));
DUMPREG(DSI_VC_IRQENABLE(0));
DUMPREG(DSI_VC_CTRL(1));
DUMPREG(DSI_VC_TE(1));
DUMPREG(DSI_VC_LONG_PACKET_HEADER(1));
DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1));
DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1));
DUMPREG(DSI_VC_IRQSTATUS(1));
DUMPREG(DSI_VC_IRQENABLE(1));
DUMPREG(DSI_VC_CTRL(2));
DUMPREG(DSI_VC_TE(2));
DUMPREG(DSI_VC_LONG_PACKET_HEADER(2));
DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2));
DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2));
DUMPREG(DSI_VC_IRQSTATUS(2));
DUMPREG(DSI_VC_IRQENABLE(2));
DUMPREG(DSI_VC_CTRL(3));
DUMPREG(DSI_VC_TE(3));
DUMPREG(DSI_VC_LONG_PACKET_HEADER(3));
DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3));
DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3));
DUMPREG(DSI_VC_IRQSTATUS(3));
DUMPREG(DSI_VC_IRQENABLE(3));
DUMPREG(DSI_DSIPHY_CFG0);
DUMPREG(DSI_DSIPHY_CFG1);
DUMPREG(DSI_DSIPHY_CFG2);
DUMPREG(DSI_DSIPHY_CFG5);
DUMPREG(DSI_PLL_CONTROL);
DUMPREG(DSI_PLL_STATUS);
DUMPREG(DSI_PLL_GO);
DUMPREG(DSI_PLL_CONFIGURATION1);
DUMPREG(DSI_PLL_CONFIGURATION2);
dsi_disable_scp_clk(dsidev);
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
#undef DUMPREG
}
static void dsi1_dump_regs(struct seq_file *s)
{
struct platform_device *dsidev = dsi_get_dsidev_from_id(0);
dsi_dump_dsidev_regs(dsidev, s);
}
static void dsi2_dump_regs(struct seq_file *s)
{
struct platform_device *dsidev = dsi_get_dsidev_from_id(1);
dsi_dump_dsidev_regs(dsidev, s);
}
void dsi_create_debugfs_files_reg(struct dentry *debugfs_dir,
const struct file_operations *debug_fops)
{
struct platform_device *dsidev;
dsidev = dsi_get_dsidev_from_id(0);
if (dsidev)
debugfs_create_file("dsi1_regs", S_IRUGO, debugfs_dir,
&dsi1_dump_regs, debug_fops);
dsidev = dsi_get_dsidev_from_id(1);
if (dsidev)
debugfs_create_file("dsi2_regs", S_IRUGO, debugfs_dir,
&dsi2_dump_regs, debug_fops);
}
enum dsi_cio_power_state {
DSI_COMPLEXIO_POWER_OFF = 0x0,
DSI_COMPLEXIO_POWER_ON = 0x1,
DSI_COMPLEXIO_POWER_ULPS = 0x2,
};
static int dsi_cio_power(struct platform_device *dsidev,
enum dsi_cio_power_state state)
{
int t = 0;
/* PWR_CMD */
REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG1, state, 28, 27);
/* PWR_STATUS */
while (FLD_GET(dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1),
26, 25) != state) {
if (++t > 1000) {
DSSERR("failed to set complexio power state to "
"%d\n", state);
return -ENODEV;
}
udelay(1);
}
return 0;
}
/* Number of data lanes present on DSI interface */
static inline int dsi_get_num_data_lanes(struct platform_device *dsidev)
{
/* DSI on OMAP3 doesn't have register DSI_GNQ, set number
* of data lanes as 2 by default */
if (dss_has_feature(FEAT_DSI_GNQ))
return REG_GET(dsidev, DSI_GNQ, 11, 9); /* NB_DATA_LANES */
else
return 2;
}
/* Number of data lanes used by the dss device */
static inline int dsi_get_num_data_lanes_dssdev(struct omap_dss_device *dssdev)
{
int num_data_lanes = 0;
if (dssdev->phy.dsi.data1_lane != 0)
num_data_lanes++;
if (dssdev->phy.dsi.data2_lane != 0)
num_data_lanes++;
if (dssdev->phy.dsi.data3_lane != 0)
num_data_lanes++;
if (dssdev->phy.dsi.data4_lane != 0)
num_data_lanes++;
return num_data_lanes;
}
static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
{
int val;
/* line buffer on OMAP3 is 1024 x 24bits */
/* XXX: for some reason using full buffer size causes
* considerable TX slowdown with update sizes that fill the
* whole buffer */
if (!dss_has_feature(FEAT_DSI_GNQ))
return 1023 * 3;
val = REG_GET(dsidev, DSI_GNQ, 14, 12); /* VP1_LINE_BUFFER_SIZE */
switch (val) {
case 1:
return 512 * 3; /* 512x24 bits */
case 2:
return 682 * 3; /* 682x24 bits */
case 3:
return 853 * 3; /* 853x24 bits */
case 4:
return 1024 * 3; /* 1024x24 bits */
case 5:
return 1194 * 3; /* 1194x24 bits */
case 6:
return 1365 * 3; /* 1365x24 bits */
default:
BUG();
}
}
static void dsi_set_lane_config(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
u32 r;
int num_data_lanes_dssdev = dsi_get_num_data_lanes_dssdev(dssdev);
int clk_lane = dssdev->phy.dsi.clk_lane;
int data1_lane = dssdev->phy.dsi.data1_lane;
int data2_lane = dssdev->phy.dsi.data2_lane;
int clk_pol = dssdev->phy.dsi.clk_pol;
int data1_pol = dssdev->phy.dsi.data1_pol;
int data2_pol = dssdev->phy.dsi.data2_pol;
r = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1);
r = FLD_MOD(r, clk_lane, 2, 0);
r = FLD_MOD(r, clk_pol, 3, 3);
r = FLD_MOD(r, data1_lane, 6, 4);
r = FLD_MOD(r, data1_pol, 7, 7);
r = FLD_MOD(r, data2_lane, 10, 8);
r = FLD_MOD(r, data2_pol, 11, 11);
if (num_data_lanes_dssdev > 2) {
int data3_lane = dssdev->phy.dsi.data3_lane;
int data3_pol = dssdev->phy.dsi.data3_pol;
r = FLD_MOD(r, data3_lane, 14, 12);
r = FLD_MOD(r, data3_pol, 15, 15);
}
if (num_data_lanes_dssdev > 3) {
int data4_lane = dssdev->phy.dsi.data4_lane;
int data4_pol = dssdev->phy.dsi.data4_pol;
r = FLD_MOD(r, data4_lane, 18, 16);
r = FLD_MOD(r, data4_pol, 19, 19);
}
dsi_write_reg(dsidev, DSI_COMPLEXIO_CFG1, r);
/* The configuration of the DSI complex I/O (number of data lanes,
position, differential order) should not be changed while
DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for
the hardware to take into account a new configuration of the complex
I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to
follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1,
then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set
DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the
DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the
DSI complex I/O configuration is unknown. */
/*
REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0);
REG_FLD_MOD(dsidev, DSI_CTRL, 0, 0, 0);
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 20, 20);
REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0);
*/
}
static inline unsigned ns2ddr(struct platform_device *dsidev, unsigned ns)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
/* convert time in ns to ddr ticks, rounding up */
unsigned long ddr_clk = dsi->current_cinfo.clkin4ddr / 4;
return (ns * (ddr_clk / 1000 / 1000) + 999) / 1000;
}
static inline unsigned ddr2ns(struct platform_device *dsidev, unsigned ddr)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long ddr_clk = dsi->current_cinfo.clkin4ddr / 4;
return ddr * 1000 * 1000 / (ddr_clk / 1000);
}
static void dsi_cio_timings(struct platform_device *dsidev)
{
u32 r;
u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit;
u32 tlpx_half, tclk_trail, tclk_zero;
u32 tclk_prepare;
/* calculate timings */
/* 1 * DDR_CLK = 2 * UI */
/* min 40ns + 4*UI max 85ns + 6*UI */
ths_prepare = ns2ddr(dsidev, 70) + 2;
/* min 145ns + 10*UI */
ths_prepare_ths_zero = ns2ddr(dsidev, 175) + 2;
/* min max(8*UI, 60ns+4*UI) */
ths_trail = ns2ddr(dsidev, 60) + 5;
/* min 100ns */
ths_exit = ns2ddr(dsidev, 145);
/* tlpx min 50n */
tlpx_half = ns2ddr(dsidev, 25);
/* min 60ns */
tclk_trail = ns2ddr(dsidev, 60) + 2;
/* min 38ns, max 95ns */
tclk_prepare = ns2ddr(dsidev, 65);
/* min tclk-prepare + tclk-zero = 300ns */
tclk_zero = ns2ddr(dsidev, 260);
DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n",
ths_prepare, ddr2ns(dsidev, ths_prepare),
ths_prepare_ths_zero, ddr2ns(dsidev, ths_prepare_ths_zero));
DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n",
ths_trail, ddr2ns(dsidev, ths_trail),
ths_exit, ddr2ns(dsidev, ths_exit));
DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), "
"tclk_zero %u (%uns)\n",
tlpx_half, ddr2ns(dsidev, tlpx_half),
tclk_trail, ddr2ns(dsidev, tclk_trail),
tclk_zero, ddr2ns(dsidev, tclk_zero));
DSSDBG("tclk_prepare %u (%uns)\n",
tclk_prepare, ddr2ns(dsidev, tclk_prepare));
/* program timings */
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0);
r = FLD_MOD(r, ths_prepare, 31, 24);
r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16);
r = FLD_MOD(r, ths_trail, 15, 8);
r = FLD_MOD(r, ths_exit, 7, 0);
dsi_write_reg(dsidev, DSI_DSIPHY_CFG0, r);
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1);
r = FLD_MOD(r, tlpx_half, 22, 16);
r = FLD_MOD(r, tclk_trail, 15, 8);
r = FLD_MOD(r, tclk_zero, 7, 0);
dsi_write_reg(dsidev, DSI_DSIPHY_CFG1, r);
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG2);
r = FLD_MOD(r, tclk_prepare, 7, 0);
dsi_write_reg(dsidev, DSI_DSIPHY_CFG2, r);
}
static void dsi_cio_enable_lane_override(struct omap_dss_device *dssdev,
enum dsi_lane lanes)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int clk_lane = dssdev->phy.dsi.clk_lane;
int data1_lane = dssdev->phy.dsi.data1_lane;
int data2_lane = dssdev->phy.dsi.data2_lane;
int data3_lane = dssdev->phy.dsi.data3_lane;
int data4_lane = dssdev->phy.dsi.data4_lane;
int clk_pol = dssdev->phy.dsi.clk_pol;
int data1_pol = dssdev->phy.dsi.data1_pol;
int data2_pol = dssdev->phy.dsi.data2_pol;
int data3_pol = dssdev->phy.dsi.data3_pol;
int data4_pol = dssdev->phy.dsi.data4_pol;
u32 l = 0;
u8 lptxscp_start = dsi->num_data_lanes == 2 ? 22 : 26;
if (lanes & DSI_CLK_P)
l |= 1 << ((clk_lane - 1) * 2 + (clk_pol ? 0 : 1));
if (lanes & DSI_CLK_N)
l |= 1 << ((clk_lane - 1) * 2 + (clk_pol ? 1 : 0));
if (lanes & DSI_DATA1_P)
l |= 1 << ((data1_lane - 1) * 2 + (data1_pol ? 0 : 1));
if (lanes & DSI_DATA1_N)
l |= 1 << ((data1_lane - 1) * 2 + (data1_pol ? 1 : 0));
if (lanes & DSI_DATA2_P)
l |= 1 << ((data2_lane - 1) * 2 + (data2_pol ? 0 : 1));
if (lanes & DSI_DATA2_N)
l |= 1 << ((data2_lane - 1) * 2 + (data2_pol ? 1 : 0));
if (lanes & DSI_DATA3_P)
l |= 1 << ((data3_lane - 1) * 2 + (data3_pol ? 0 : 1));
if (lanes & DSI_DATA3_N)
l |= 1 << ((data3_lane - 1) * 2 + (data3_pol ? 1 : 0));
if (lanes & DSI_DATA4_P)
l |= 1 << ((data4_lane - 1) * 2 + (data4_pol ? 0 : 1));
if (lanes & DSI_DATA4_N)
l |= 1 << ((data4_lane - 1) * 2 + (data4_pol ? 1 : 0));
/*
* Bits in REGLPTXSCPDAT4TO0DXDY:
* 17: DY0 18: DX0
* 19: DY1 20: DX1
* 21: DY2 22: DX2
* 23: DY3 24: DX3
* 25: DY4 26: DX4
*/
/* Set the lane override configuration */
/* REGLPTXSCPDAT4TO0DXDY */
REG_FLD_MOD(dsidev, DSI_DSIPHY_CFG10, l, lptxscp_start, 17);
/* Enable lane override */
/* ENLPTXSCPDAT */
REG_FLD_MOD(dsidev, DSI_DSIPHY_CFG10, 1, 27, 27);
}
static void dsi_cio_disable_lane_override(struct platform_device *dsidev)
{
/* Disable lane override */
REG_FLD_MOD(dsidev, DSI_DSIPHY_CFG10, 0, 27, 27); /* ENLPTXSCPDAT */
/* Reset the lane override configuration */
/* REGLPTXSCPDAT4TO0DXDY */
REG_FLD_MOD(dsidev, DSI_DSIPHY_CFG10, 0, 22, 17);
}
static int dsi_cio_wait_tx_clk_esc_reset(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int t;
int bits[3];
bool in_use[3];
if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) {
bits[0] = 28;
bits[1] = 27;
bits[2] = 26;
} else {
bits[0] = 24;
bits[1] = 25;
bits[2] = 26;
}
in_use[0] = false;
in_use[1] = false;
in_use[2] = false;
if (dssdev->phy.dsi.clk_lane != 0)
in_use[dssdev->phy.dsi.clk_lane - 1] = true;
if (dssdev->phy.dsi.data1_lane != 0)
in_use[dssdev->phy.dsi.data1_lane - 1] = true;
if (dssdev->phy.dsi.data2_lane != 0)
in_use[dssdev->phy.dsi.data2_lane - 1] = true;
t = 100000;
while (true) {
u32 l;
int i;
int ok;
l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
ok = 0;
for (i = 0; i < 3; ++i) {
if (!in_use[i] || (l & (1 << bits[i])))
ok++;
}
if (ok == 3)
break;
if (--t == 0) {
for (i = 0; i < 3; ++i) {
if (!in_use[i] || (l & (1 << bits[i])))
continue;
DSSERR("CIO TXCLKESC%d domain not coming " \
"out of reset\n", i);
}
return -EIO;
}
}
return 0;
}
static int dsi_cio_init(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int r;
int num_data_lanes_dssdev = dsi_get_num_data_lanes_dssdev(dssdev);
u32 l;
DSSDBGF();
if (dsi->dsi_mux_pads)
dsi->dsi_mux_pads(true);
dsi_enable_scp_clk(dsidev);
/* A dummy read using the SCP interface to any DSIPHY register is
* required after DSIPHY reset to complete the reset of the DSI complex
* I/O. */
dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
if (wait_for_bit_change(dsidev, DSI_DSIPHY_CFG5, 30, 1) != 1) {
DSSERR("CIO SCP Clock domain not coming out of reset.\n");
r = -EIO;
goto err_scp_clk_dom;
}
dsi_set_lane_config(dssdev);
/* set TX STOP MODE timer to maximum for this operation */
l = dsi_read_reg(dsidev, DSI_TIMING1);
l = FLD_MOD(l, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
l = FLD_MOD(l, 1, 14, 14); /* STOP_STATE_X16_IO */
l = FLD_MOD(l, 1, 13, 13); /* STOP_STATE_X4_IO */
l = FLD_MOD(l, 0x1fff, 12, 0); /* STOP_STATE_COUNTER_IO */
dsi_write_reg(dsidev, DSI_TIMING1, l);
if (dsi->ulps_enabled) {
u32 lane_mask = DSI_CLK_P | DSI_DATA1_P | DSI_DATA2_P;
DSSDBG("manual ulps exit\n");
/* ULPS is exited by Mark-1 state for 1ms, followed by
* stop state. DSS HW cannot do this via the normal
* ULPS exit sequence, as after reset the DSS HW thinks
* that we are not in ULPS mode, and refuses to send the
* sequence. So we need to send the ULPS exit sequence
* manually.
*/
if (num_data_lanes_dssdev > 2)
lane_mask |= DSI_DATA3_P;
if (num_data_lanes_dssdev > 3)
lane_mask |= DSI_DATA4_P;
dsi_cio_enable_lane_override(dssdev, lane_mask);
}
r = dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ON);
if (r)
goto err_cio_pwr;
if (wait_for_bit_change(dsidev, DSI_COMPLEXIO_CFG1, 29, 1) != 1) {
DSSERR("CIO PWR clock domain not coming out of reset.\n");
r = -ENODEV;
goto err_cio_pwr_dom;
}
dsi_if_enable(dsidev, true);
dsi_if_enable(dsidev, false);
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */
r = dsi_cio_wait_tx_clk_esc_reset(dssdev);
if (r)
goto err_tx_clk_esc_rst;
if (dsi->ulps_enabled) {
/* Keep Mark-1 state for 1ms (as per DSI spec) */
ktime_t wait = ns_to_ktime(1000 * 1000);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_hrtimeout(&wait, HRTIMER_MODE_REL);
/* Disable the override. The lanes should be set to Mark-11
* state by the HW */
dsi_cio_disable_lane_override(dsidev);
}
/* FORCE_TX_STOP_MODE_IO */
REG_FLD_MOD(dsidev, DSI_TIMING1, 0, 15, 15);
dsi_cio_timings(dsidev);
dsi->ulps_enabled = false;
DSSDBG("CIO init done\n");
return 0;
err_tx_clk_esc_rst:
REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 20, 20); /* LP_CLK_ENABLE */
err_cio_pwr_dom:
dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
err_cio_pwr:
if (dsi->ulps_enabled)
dsi_cio_disable_lane_override(dsidev);
err_scp_clk_dom:
dsi_disable_scp_clk(dsidev);
if (dsi->dsi_mux_pads)
dsi->dsi_mux_pads(false);
return r;
}
static void dsi_cio_uninit(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
dsi_disable_scp_clk(dsidev);
if (dsi->dsi_mux_pads)
dsi->dsi_mux_pads(false);
}
static int _dsi_wait_reset(struct platform_device *dsidev)
{
int t = 0;
while (REG_GET(dsidev, DSI_SYSSTATUS, 0, 0) == 0) {
if (++t > 5) {
DSSERR("soft reset failed\n");
return -ENODEV;
}
udelay(1);
}
return 0;
}
static int _dsi_reset(struct platform_device *dsidev)
{
/* Soft reset */
REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 1, 1);
return _dsi_wait_reset(dsidev);
}
static void dsi_config_tx_fifo(struct platform_device *dsidev,
enum fifo_size size1, enum fifo_size size2,
enum fifo_size size3, enum fifo_size size4)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 r = 0;
int add = 0;
int i;
dsi->vc[0].fifo_size = size1;
dsi->vc[1].fifo_size = size2;
dsi->vc[2].fifo_size = size3;
dsi->vc[3].fifo_size = size4;
for (i = 0; i < 4; i++) {
u8 v;
int size = dsi->vc[i].fifo_size;
if (add + size > 4) {
DSSERR("Illegal FIFO configuration\n");
BUG();
}
v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
r |= v << (8 * i);
/*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */
add += size;
}
dsi_write_reg(dsidev, DSI_TX_FIFO_VC_SIZE, r);
}
static void dsi_config_rx_fifo(struct platform_device *dsidev,
enum fifo_size size1, enum fifo_size size2,
enum fifo_size size3, enum fifo_size size4)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 r = 0;
int add = 0;
int i;
dsi->vc[0].fifo_size = size1;
dsi->vc[1].fifo_size = size2;
dsi->vc[2].fifo_size = size3;
dsi->vc[3].fifo_size = size4;
for (i = 0; i < 4; i++) {
u8 v;
int size = dsi->vc[i].fifo_size;
if (add + size > 4) {
DSSERR("Illegal FIFO configuration\n");
BUG();
}
v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
r |= v << (8 * i);
/*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */
add += size;
}
dsi_write_reg(dsidev, DSI_RX_FIFO_VC_SIZE, r);
}
static int dsi_force_tx_stop_mode_io(struct platform_device *dsidev)
{
u32 r;
r = dsi_read_reg(dsidev, DSI_TIMING1);
r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
dsi_write_reg(dsidev, DSI_TIMING1, r);
if (wait_for_bit_change(dsidev, DSI_TIMING1, 15, 0) != 0) {
DSSERR("TX_STOP bit not going down\n");
return -EIO;
}
return 0;
}
static bool dsi_vc_is_enabled(struct platform_device *dsidev, int channel)
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
{
return REG_GET(dsidev, DSI_VC_CTRL(channel), 0, 0);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
}
static void dsi_packet_sent_handler_vp(void *data, u32 mask)
{
struct dsi_packet_sent_handler_data *vp_data =
(struct dsi_packet_sent_handler_data *) data;
struct dsi_data *dsi = dsi_get_dsidrv_data(vp_data->dsidev);
const int channel = dsi->update_channel;
u8 bit = dsi->te_enabled ? 30 : 31;
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (REG_GET(vp_data->dsidev, DSI_VC_TE(channel), bit, bit) == 0)
complete(vp_data->completion);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
}
static int dsi_sync_vc_vp(struct platform_device *dsidev, int channel)
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
DECLARE_COMPLETION_ONSTACK(completion);
struct dsi_packet_sent_handler_data vp_data = { dsidev, &completion };
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
int r = 0;
u8 bit;
bit = dsi->te_enabled ? 30 : 31;
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
r = dsi_register_isr_vc(dsidev, channel, dsi_packet_sent_handler_vp,
&vp_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (r)
goto err0;
/* Wait for completion only if TE_EN/TE_START is still set */
if (REG_GET(dsidev, DSI_VC_TE(channel), bit, bit)) {
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (wait_for_completion_timeout(&completion,
msecs_to_jiffies(10)) == 0) {
DSSERR("Failed to complete previous frame transfer\n");
r = -EIO;
goto err1;
}
}
dsi_unregister_isr_vc(dsidev, channel, dsi_packet_sent_handler_vp,
&vp_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
return 0;
err1:
dsi_unregister_isr_vc(dsidev, channel, dsi_packet_sent_handler_vp,
&vp_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
err0:
return r;
}
static void dsi_packet_sent_handler_l4(void *data, u32 mask)
{
struct dsi_packet_sent_handler_data *l4_data =
(struct dsi_packet_sent_handler_data *) data;
struct dsi_data *dsi = dsi_get_dsidrv_data(l4_data->dsidev);
const int channel = dsi->update_channel;
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (REG_GET(l4_data->dsidev, DSI_VC_CTRL(channel), 5, 5) == 0)
complete(l4_data->completion);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
}
static int dsi_sync_vc_l4(struct platform_device *dsidev, int channel)
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
{
DECLARE_COMPLETION_ONSTACK(completion);
struct dsi_packet_sent_handler_data l4_data = { dsidev, &completion };
int r = 0;
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
r = dsi_register_isr_vc(dsidev, channel, dsi_packet_sent_handler_l4,
&l4_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (r)
goto err0;
/* Wait for completion only if TX_FIFO_NOT_EMPTY is still set */
if (REG_GET(dsidev, DSI_VC_CTRL(channel), 5, 5)) {
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
if (wait_for_completion_timeout(&completion,
msecs_to_jiffies(10)) == 0) {
DSSERR("Failed to complete previous l4 transfer\n");
r = -EIO;
goto err1;
}
}
dsi_unregister_isr_vc(dsidev, channel, dsi_packet_sent_handler_l4,
&l4_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
return 0;
err1:
dsi_unregister_isr_vc(dsidev, channel, dsi_packet_sent_handler_l4,
&l4_data, DSI_VC_IRQ_PACKET_SENT);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
err0:
return r;
}
static int dsi_sync_vc(struct platform_device *dsidev, int channel)
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
WARN_ON(!dsi_bus_is_locked(dsidev));
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
WARN_ON(in_interrupt());
if (!dsi_vc_is_enabled(dsidev, channel))
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
return 0;
switch (dsi->vc[channel].mode) {
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
case DSI_VC_MODE_VP:
return dsi_sync_vc_vp(dsidev, channel);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
case DSI_VC_MODE_L4:
return dsi_sync_vc_l4(dsidev, channel);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
default:
BUG();
}
}
static int dsi_vc_enable(struct platform_device *dsidev, int channel,
bool enable)
{
DSSDBG("dsi_vc_enable channel %d, enable %d\n",
channel, enable);
enable = enable ? 1 : 0;
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), enable, 0, 0);
if (wait_for_bit_change(dsidev, DSI_VC_CTRL(channel),
0, enable) != enable) {
DSSERR("Failed to set dsi_vc_enable to %d\n", enable);
return -EIO;
}
return 0;
}
static void dsi_vc_initial_config(struct platform_device *dsidev, int channel)
{
u32 r;
DSSDBGF("%d", channel);
r = dsi_read_reg(dsidev, DSI_VC_CTRL(channel));
if (FLD_GET(r, 15, 15)) /* VC_BUSY */
DSSERR("VC(%d) busy when trying to configure it!\n",
channel);
r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */
r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */
r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */
r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */
r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */
r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */
r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */
if (dss_has_feature(FEAT_DSI_VC_OCP_WIDTH))
r = FLD_MOD(r, 3, 11, 10); /* OCP_WIDTH = 32 bit */
r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */
r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */
dsi_write_reg(dsidev, DSI_VC_CTRL(channel), r);
}
static int dsi_vc_config_l4(struct platform_device *dsidev, int channel)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dsi->vc[channel].mode == DSI_VC_MODE_L4)
return 0;
DSSDBGF("%d", channel);
dsi_sync_vc(dsidev, channel);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
dsi_vc_enable(dsidev, channel, 0);
/* VC_BUSY */
if (wait_for_bit_change(dsidev, DSI_VC_CTRL(channel), 15, 0) != 0) {
DSSERR("vc(%d) busy when trying to config for L4\n", channel);
return -EIO;
}
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
/* DCS_CMD_ENABLE */
if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 0, 30, 30);
dsi_vc_enable(dsidev, channel, 1);
dsi->vc[channel].mode = DSI_VC_MODE_L4;
return 0;
}
static int dsi_vc_config_vp(struct platform_device *dsidev, int channel)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dsi->vc[channel].mode == DSI_VC_MODE_VP)
return 0;
DSSDBGF("%d", channel);
dsi_sync_vc(dsidev, channel);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
dsi_vc_enable(dsidev, channel, 0);
/* VC_BUSY */
if (wait_for_bit_change(dsidev, DSI_VC_CTRL(channel), 15, 0) != 0) {
DSSERR("vc(%d) busy when trying to config for VP\n", channel);
return -EIO;
}
/* SOURCE, 1 = video port */
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 1, 1);
/* DCS_CMD_ENABLE */
if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 30, 30);
dsi_vc_enable(dsidev, channel, 1);
dsi->vc[channel].mode = DSI_VC_MODE_VP;
return 0;
}
void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
bool enable)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
WARN_ON(!dsi_bus_is_locked(dsidev));
dsi_vc_enable(dsidev, channel, 0);
dsi_if_enable(dsidev, 0);
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), enable, 9, 9);
dsi_vc_enable(dsidev, channel, 1);
dsi_if_enable(dsidev, 1);
dsi_force_tx_stop_mode_io(dsidev);
}
EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
static void dsi_vc_flush_long_data(struct platform_device *dsidev, int channel)
{
while (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20)) {
u32 val;
val = dsi_read_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel));
DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n",
(val >> 0) & 0xff,
(val >> 8) & 0xff,
(val >> 16) & 0xff,
(val >> 24) & 0xff);
}
}
static void dsi_show_rx_ack_with_err(u16 err)
{
DSSERR("\tACK with ERROR (%#x):\n", err);
if (err & (1 << 0))
DSSERR("\t\tSoT Error\n");
if (err & (1 << 1))
DSSERR("\t\tSoT Sync Error\n");
if (err & (1 << 2))
DSSERR("\t\tEoT Sync Error\n");
if (err & (1 << 3))
DSSERR("\t\tEscape Mode Entry Command Error\n");
if (err & (1 << 4))
DSSERR("\t\tLP Transmit Sync Error\n");
if (err & (1 << 5))
DSSERR("\t\tHS Receive Timeout Error\n");
if (err & (1 << 6))
DSSERR("\t\tFalse Control Error\n");
if (err & (1 << 7))
DSSERR("\t\t(reserved7)\n");
if (err & (1 << 8))
DSSERR("\t\tECC Error, single-bit (corrected)\n");
if (err & (1 << 9))
DSSERR("\t\tECC Error, multi-bit (not corrected)\n");
if (err & (1 << 10))
DSSERR("\t\tChecksum Error\n");
if (err & (1 << 11))
DSSERR("\t\tData type not recognized\n");
if (err & (1 << 12))
DSSERR("\t\tInvalid VC ID\n");
if (err & (1 << 13))
DSSERR("\t\tInvalid Transmission Length\n");
if (err & (1 << 14))
DSSERR("\t\t(reserved14)\n");
if (err & (1 << 15))
DSSERR("\t\tDSI Protocol Violation\n");
}
static u16 dsi_vc_flush_receive_data(struct platform_device *dsidev,
int channel)
{
/* RX_FIFO_NOT_EMPTY */
while (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20)) {
u32 val;
u8 dt;
val = dsi_read_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel));
DSSERR("\trawval %#08x\n", val);
dt = FLD_GET(val, 5, 0);
if (dt == DSI_DT_RX_ACK_WITH_ERR) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
} else if (dt == DSI_DT_RX_SHORT_READ_1) {
DSSERR("\tDCS short response, 1 byte: %#x\n",
FLD_GET(val, 23, 8));
} else if (dt == DSI_DT_RX_SHORT_READ_2) {
DSSERR("\tDCS short response, 2 byte: %#x\n",
FLD_GET(val, 23, 8));
} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
DSSERR("\tDCS long response, len %d\n",
FLD_GET(val, 23, 8));
dsi_vc_flush_long_data(dsidev, channel);
} else {
DSSERR("\tunknown datatype 0x%02x\n", dt);
}
}
return 0;
}
static int dsi_vc_send_bta(struct platform_device *dsidev, int channel)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dsi->debug_write || dsi->debug_read)
DSSDBG("dsi_vc_send_bta %d\n", channel);
WARN_ON(!dsi_bus_is_locked(dsidev));
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20)) {
DSSERR("rx fifo not empty when sending BTA, dumping data:\n");
dsi_vc_flush_receive_data(dsidev, channel);
}
REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */
return 0;
}
int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
DECLARE_COMPLETION_ONSTACK(completion);
int r = 0;
u32 err;
r = dsi_register_isr_vc(dsidev, channel, dsi_completion_handler,
&completion, DSI_VC_IRQ_BTA);
if (r)
goto err0;
r = dsi_register_isr(dsidev, dsi_completion_handler, &completion,
DSI_IRQ_ERROR_MASK);
if (r)
goto err1;
r = dsi_vc_send_bta(dsidev, channel);
if (r)
goto err2;
if (wait_for_completion_timeout(&completion,
msecs_to_jiffies(500)) == 0) {
DSSERR("Failed to receive BTA\n");
r = -EIO;
goto err2;
}
err = dsi_get_errors(dsidev);
if (err) {
DSSERR("Error while sending BTA: %x\n", err);
r = -EIO;
goto err2;
}
err2:
dsi_unregister_isr(dsidev, dsi_completion_handler, &completion,
DSI_IRQ_ERROR_MASK);
err1:
dsi_unregister_isr_vc(dsidev, channel, dsi_completion_handler,
&completion, DSI_VC_IRQ_BTA);
err0:
return r;
}
EXPORT_SYMBOL(dsi_vc_send_bta_sync);
static inline void dsi_vc_write_long_header(struct platform_device *dsidev,
int channel, u8 data_type, u16 len, u8 ecc)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 val;
u8 data_id;
WARN_ON(!dsi_bus_is_locked(dsidev));
data_id = data_type | dsi->vc[channel].vc_id << 6;
val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
FLD_VAL(ecc, 31, 24);
dsi_write_reg(dsidev, DSI_VC_LONG_PACKET_HEADER(channel), val);
}
static inline void dsi_vc_write_long_payload(struct platform_device *dsidev,
int channel, u8 b1, u8 b2, u8 b3, u8 b4)
{
u32 val;
val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0;
/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n",
b1, b2, b3, b4, val); */
dsi_write_reg(dsidev, DSI_VC_LONG_PACKET_PAYLOAD(channel), val);
}
static int dsi_vc_send_long(struct platform_device *dsidev, int channel,
u8 data_type, u8 *data, u16 len, u8 ecc)
{
/*u32 val; */
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int i;
u8 *p;
int r = 0;
u8 b1, b2, b3, b4;
if (dsi->debug_write)
DSSDBG("dsi_vc_send_long, %d bytes\n", len);
/* len + header */
if (dsi->vc[channel].fifo_size * 32 * 4 < len + 4) {
DSSERR("unable to send long packet: packet too long.\n");
return -EINVAL;
}
dsi_vc_config_l4(dsidev, channel);
dsi_vc_write_long_header(dsidev, channel, data_type, len, ecc);
p = data;
for (i = 0; i < len >> 2; i++) {
if (dsi->debug_write)
DSSDBG("\tsending full packet %d\n", i);
b1 = *p++;
b2 = *p++;
b3 = *p++;
b4 = *p++;
dsi_vc_write_long_payload(dsidev, channel, b1, b2, b3, b4);
}
i = len % 4;
if (i) {
b1 = 0; b2 = 0; b3 = 0;
if (dsi->debug_write)
DSSDBG("\tsending remainder bytes %d\n", i);
switch (i) {
case 3:
b1 = *p++;
b2 = *p++;
b3 = *p++;
break;
case 2:
b1 = *p++;
b2 = *p++;
break;
case 1:
b1 = *p++;
break;
}
dsi_vc_write_long_payload(dsidev, channel, b1, b2, b3, 0);
}
return r;
}
static int dsi_vc_send_short(struct platform_device *dsidev, int channel,
u8 data_type, u16 data, u8 ecc)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 r;
u8 data_id;
WARN_ON(!dsi_bus_is_locked(dsidev));
if (dsi->debug_write)
DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
channel,
data_type, data & 0xff, (data >> 8) & 0xff);
dsi_vc_config_l4(dsidev, channel);
if (FLD_GET(dsi_read_reg(dsidev, DSI_VC_CTRL(channel)), 16, 16)) {
DSSERR("ERROR FIFO FULL, aborting transfer\n");
return -EINVAL;
}
data_id = data_type | dsi->vc[channel].vc_id << 6;
r = (data_id << 0) | (data << 8) | (ecc << 24);
dsi_write_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel), r);
return 0;
}
int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
u8 nullpkg[] = {0, 0, 0, 0};
return dsi_vc_send_long(dsidev, channel, DSI_DT_NULL_PACKET, nullpkg,
4, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int r;
BUG_ON(len == 0);
if (len == 1) {
r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_0,
data[0], 0);
} else if (len == 2) {
r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_1,
data[0] | (data[1] << 8), 0);
} else {
/* 0x39 = DCS Long Write */
r = dsi_vc_send_long(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
data, len, 0);
}
return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int r;
r = dsi_vc_dcs_write_nosync(dssdev, channel, data, len);
if (r)
goto err;
r = dsi_vc_send_bta_sync(dssdev, channel);
if (r)
goto err;
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20)) {
DSSERR("rx fifo not empty after write, dumping data:\n");
dsi_vc_flush_receive_data(dsidev, channel);
r = -EIO;
goto err;
}
return 0;
err:
DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
channel, data[0], len);
return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_write);
int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd)
{
return dsi_vc_dcs_write(dssdev, channel, &dcs_cmd, 1);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_0);
int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 param)
{
u8 buf[2];
buf[0] = dcs_cmd;
buf[1] = param;
return dsi_vc_dcs_write(dssdev, channel, buf, 2);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_1);
int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *buf, int buflen)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 val;
u8 dt;
int r;
if (dsi->debug_read)
DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd);
r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_READ, dcs_cmd, 0);
if (r)
goto err;
r = dsi_vc_send_bta_sync(dssdev, channel);
if (r)
goto err;
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20) == 0) {
DSSERR("RX fifo empty when trying to read.\n");
r = -EIO;
goto err;
}
val = dsi_read_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel));
if (dsi->debug_read)
DSSDBG("\theader: %08x\n", val);
dt = FLD_GET(val, 5, 0);
if (dt == DSI_DT_RX_ACK_WITH_ERR) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
r = -EIO;
goto err;
} else if (dt == DSI_DT_RX_SHORT_READ_1) {
u8 data = FLD_GET(val, 15, 8);
if (dsi->debug_read)
DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
if (buflen < 1) {
r = -EIO;
goto err;
}
buf[0] = data;
return 1;
} else if (dt == DSI_DT_RX_SHORT_READ_2) {
u16 data = FLD_GET(val, 23, 8);
if (dsi->debug_read)
DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
if (buflen < 2) {
r = -EIO;
goto err;
}
buf[0] = data & 0xff;
buf[1] = (data >> 8) & 0xff;
return 2;
} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
int w;
int len = FLD_GET(val, 23, 8);
if (dsi->debug_read)
DSSDBG("\tDCS long response, len %d\n", len);
if (len > buflen) {
r = -EIO;
goto err;
}
/* two byte checksum ends the packet, not included in len */
for (w = 0; w < len + 2;) {
int b;
val = dsi_read_reg(dsidev,
DSI_VC_SHORT_PACKET_HEADER(channel));
if (dsi->debug_read)
DSSDBG("\t\t%02x %02x %02x %02x\n",
(val >> 0) & 0xff,
(val >> 8) & 0xff,
(val >> 16) & 0xff,
(val >> 24) & 0xff);
for (b = 0; b < 4; ++b) {
if (w < len)
buf[w] = (val >> (b * 8)) & 0xff;
/* we discard the 2 byte checksum */
++w;
}
}
return len;
} else {
DSSERR("\tunknown datatype 0x%02x\n", dt);
r = -EIO;
goto err;
}
BUG();
err:
DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n",
channel, dcs_cmd);
return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_read);
int dsi_vc_dcs_read_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *data)
{
int r;
r = dsi_vc_dcs_read(dssdev, channel, dcs_cmd, data, 1);
if (r < 0)
return r;
if (r != 1)
return -EIO;
return 0;
}
EXPORT_SYMBOL(dsi_vc_dcs_read_1);
int dsi_vc_dcs_read_2(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *data1, u8 *data2)
{
u8 buf[2];
int r;
r = dsi_vc_dcs_read(dssdev, channel, dcs_cmd, buf, 2);
if (r < 0)
return r;
if (r != 2)
return -EIO;
*data1 = buf[0];
*data2 = buf[1];
return 0;
}
EXPORT_SYMBOL(dsi_vc_dcs_read_2);
int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
u16 len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
return dsi_vc_send_short(dsidev, channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
len, 0);
}
EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
static int dsi_enter_ulps(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
DECLARE_COMPLETION_ONSTACK(completion);
int r;
DSSDBGF();
WARN_ON(!dsi_bus_is_locked(dsidev));
WARN_ON(dsi->ulps_enabled);
if (dsi->ulps_enabled)
return 0;
if (REG_GET(dsidev, DSI_CLK_CTRL, 13, 13)) {
DSSERR("DDR_CLK_ALWAYS_ON enabled when entering ULPS\n");
return -EIO;
}
dsi_sync_vc(dsidev, 0);
dsi_sync_vc(dsidev, 1);
dsi_sync_vc(dsidev, 2);
dsi_sync_vc(dsidev, 3);
dsi_force_tx_stop_mode_io(dsidev);
dsi_vc_enable(dsidev, 0, false);
dsi_vc_enable(dsidev, 1, false);
dsi_vc_enable(dsidev, 2, false);
dsi_vc_enable(dsidev, 3, false);
if (REG_GET(dsidev, DSI_COMPLEXIO_CFG2, 16, 16)) { /* HS_BUSY */
DSSERR("HS busy when enabling ULPS\n");
return -EIO;
}
if (REG_GET(dsidev, DSI_COMPLEXIO_CFG2, 17, 17)) { /* LP_BUSY */
DSSERR("LP busy when enabling ULPS\n");
return -EIO;
}
r = dsi_register_isr_cio(dsidev, dsi_completion_handler, &completion,
DSI_CIO_IRQ_ULPSACTIVENOT_ALL0);
if (r)
return r;
/* Assert TxRequestEsc for data lanes and TxUlpsClk for clk lane */
/* LANEx_ULPS_SIG2 */
REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (1 << 0) | (1 << 1) | (1 << 2),
7, 5);
if (wait_for_completion_timeout(&completion,
msecs_to_jiffies(1000)) == 0) {
DSSERR("ULPS enable timeout\n");
r = -EIO;
goto err;
}
dsi_unregister_isr_cio(dsidev, dsi_completion_handler, &completion,
DSI_CIO_IRQ_ULPSACTIVENOT_ALL0);
dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ULPS);
dsi_if_enable(dsidev, false);
dsi->ulps_enabled = true;
return 0;
err:
dsi_unregister_isr_cio(dsidev, dsi_completion_handler, &completion,
DSI_CIO_IRQ_ULPSACTIVENOT_ALL0);
return r;
}
static void dsi_set_lp_rx_timeout(struct platform_device *dsidev,
unsigned ticks, bool x4, bool x16)
{
unsigned long fck;
unsigned long total_ticks;
u32 r;
BUG_ON(ticks > 0x1fff);
/* ticks in DSI_FCK */
fck = dsi_fclk_rate(dsidev);
r = dsi_read_reg(dsidev, DSI_TIMING2);
r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */
r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* LP_RX_TO_X16 */
r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* LP_RX_TO_X4 */
r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */
dsi_write_reg(dsidev, DSI_TIMING2, r);
total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
DSSDBG("LP_RX_TO %lu ticks (%#x%s%s) = %lu ns\n",
total_ticks,
ticks, x4 ? " x4" : "", x16 ? " x16" : "",
(total_ticks * 1000) / (fck / 1000 / 1000));
}
static void dsi_set_ta_timeout(struct platform_device *dsidev, unsigned ticks,
bool x8, bool x16)
{
unsigned long fck;
unsigned long total_ticks;
u32 r;
BUG_ON(ticks > 0x1fff);
/* ticks in DSI_FCK */
fck = dsi_fclk_rate(dsidev);
r = dsi_read_reg(dsidev, DSI_TIMING1);
r = FLD_MOD(r, 1, 31, 31); /* TA_TO */
r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* TA_TO_X16 */
r = FLD_MOD(r, x8 ? 1 : 0, 29, 29); /* TA_TO_X8 */
r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */
dsi_write_reg(dsidev, DSI_TIMING1, r);
total_ticks = ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1);
DSSDBG("TA_TO %lu ticks (%#x%s%s) = %lu ns\n",
total_ticks,
ticks, x8 ? " x8" : "", x16 ? " x16" : "",
(total_ticks * 1000) / (fck / 1000 / 1000));
}
static void dsi_set_stop_state_counter(struct platform_device *dsidev,
unsigned ticks, bool x4, bool x16)
{
unsigned long fck;
unsigned long total_ticks;
u32 r;
BUG_ON(ticks > 0x1fff);
/* ticks in DSI_FCK */
fck = dsi_fclk_rate(dsidev);
r = dsi_read_reg(dsidev, DSI_TIMING1);
r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* STOP_STATE_X16_IO */
r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* STOP_STATE_X4_IO */
r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */
dsi_write_reg(dsidev, DSI_TIMING1, r);
total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
DSSDBG("STOP_STATE_COUNTER %lu ticks (%#x%s%s) = %lu ns\n",
total_ticks,
ticks, x4 ? " x4" : "", x16 ? " x16" : "",
(total_ticks * 1000) / (fck / 1000 / 1000));
}
static void dsi_set_hs_tx_timeout(struct platform_device *dsidev,
unsigned ticks, bool x4, bool x16)
{
unsigned long fck;
unsigned long total_ticks;
u32 r;
BUG_ON(ticks > 0x1fff);
/* ticks in TxByteClkHS */
fck = dsi_get_txbyteclkhs(dsidev);
r = dsi_read_reg(dsidev, DSI_TIMING2);
r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */
r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* HS_TX_TO_X16 */
r = FLD_MOD(r, x4 ? 1 : 0, 29, 29); /* HS_TX_TO_X8 (4 really) */
r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */
dsi_write_reg(dsidev, DSI_TIMING2, r);
total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
DSSDBG("HS_TX_TO %lu ticks (%#x%s%s) = %lu ns\n",
total_ticks,
ticks, x4 ? " x4" : "", x16 ? " x16" : "",
(total_ticks * 1000) / (fck / 1000 / 1000));
}
static int dsi_proto_config(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
u32 r;
int buswidth = 0;
dsi_config_tx_fifo(dsidev, DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32);
dsi_config_rx_fifo(dsidev, DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32,
DSI_FIFO_SIZE_32);
/* XXX what values for the timeouts? */
dsi_set_stop_state_counter(dsidev, 0x1000, false, false);
dsi_set_ta_timeout(dsidev, 0x1fff, true, true);
dsi_set_lp_rx_timeout(dsidev, 0x1fff, true, true);
dsi_set_hs_tx_timeout(dsidev, 0x1fff, true, true);
switch (dssdev->ctrl.pixel_size) {
case 16:
buswidth = 0;
break;
case 18:
buswidth = 1;
break;
case 24:
buswidth = 2;
break;
default:
BUG();
}
r = dsi_read_reg(dsidev, DSI_CTRL);
r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */
r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */
r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */
r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/
r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */
r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */
r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */
r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */
r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */
if (!dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC)) {
r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */
/* DCS_CMD_CODE, 1=start, 0=continue */
r = FLD_MOD(r, 0, 25, 25);
}
dsi_write_reg(dsidev, DSI_CTRL, r);
dsi_vc_initial_config(dsidev, 0);
dsi_vc_initial_config(dsidev, 1);
dsi_vc_initial_config(dsidev, 2);
dsi_vc_initial_config(dsidev, 3);
return 0;
}
static void dsi_proto_timings(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail;
unsigned tclk_pre, tclk_post;
unsigned ths_prepare, ths_prepare_ths_zero, ths_zero;
unsigned ths_trail, ths_exit;
unsigned ddr_clk_pre, ddr_clk_post;
unsigned enter_hs_mode_lat, exit_hs_mode_lat;
unsigned ths_eot;
u32 r;
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0);
ths_prepare = FLD_GET(r, 31, 24);
ths_prepare_ths_zero = FLD_GET(r, 23, 16);
ths_zero = ths_prepare_ths_zero - ths_prepare;
ths_trail = FLD_GET(r, 15, 8);
ths_exit = FLD_GET(r, 7, 0);
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1);
tlpx = FLD_GET(r, 22, 16) * 2;
tclk_trail = FLD_GET(r, 15, 8);
tclk_zero = FLD_GET(r, 7, 0);
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG2);
tclk_prepare = FLD_GET(r, 7, 0);
/* min 8*UI */
tclk_pre = 20;
/* min 60ns + 52*UI */
tclk_post = ns2ddr(dsidev, 60) + 26;
ths_eot = DIV_ROUND_UP(4, dsi_get_num_data_lanes_dssdev(dssdev));
ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare,
4);
ddr_clk_post = DIV_ROUND_UP(tclk_post + ths_trail, 4) + ths_eot;
BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255);
BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255);
r = dsi_read_reg(dsidev, DSI_CLK_TIMING);
r = FLD_MOD(r, ddr_clk_pre, 15, 8);
r = FLD_MOD(r, ddr_clk_post, 7, 0);
dsi_write_reg(dsidev, DSI_CLK_TIMING, r);
DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n",
ddr_clk_pre,
ddr_clk_post);
enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) +
DIV_ROUND_UP(ths_prepare, 4) +
DIV_ROUND_UP(ths_zero + 3, 4);
exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot;
r = FLD_VAL(enter_hs_mode_lat, 31, 16) |
FLD_VAL(exit_hs_mode_lat, 15, 0);
dsi_write_reg(dsidev, DSI_VM_TIMING7, r);
DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n",
enter_hs_mode_lat, exit_hs_mode_lat);
}
#define DSI_DECL_VARS \
int __dsi_cb = 0; u32 __dsi_cv = 0;
#define DSI_FLUSH(dsidev, ch) \
if (__dsi_cb > 0) { \
/*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \
dsi_write_reg(dsidev, DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \
__dsi_cb = __dsi_cv = 0; \
}
#define DSI_PUSH(dsidev, ch, data) \
do { \
__dsi_cv |= (data) << (__dsi_cb * 8); \
/*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \
if (++__dsi_cb > 3) \
DSI_FLUSH(dsidev, ch); \
} while (0)
static int dsi_update_screen_l4(struct omap_dss_device *dssdev,
int x, int y, int w, int h)
{
/* Note: supports only 24bit colors in 32bit container */
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int first = 1;
int fifo_stalls = 0;
int max_dsi_packet_size;
int max_data_per_packet;
int max_pixels_per_packet;
int pixels_left;
int bytespp = dssdev->ctrl.pixel_size / 8;
int scr_width;
u32 __iomem *data;
int start_offset;
int horiz_inc;
int current_x;
struct omap_overlay *ovl;
debug_irq = 0;
DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n",
x, y, w, h);
ovl = dssdev->manager->overlays[0];
if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U)
return -EINVAL;
if (dssdev->ctrl.pixel_size != 24)
return -EINVAL;
scr_width = ovl->info.screen_width;
data = ovl->info.vaddr;
start_offset = scr_width * y + x;
horiz_inc = scr_width - w;
current_x = x;
/* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes
* in fifo */
/* When using CPU, max long packet size is TX buffer size */
max_dsi_packet_size = dsi->vc[0].fifo_size * 32 * 4;
/* we seem to get better perf if we divide the tx fifo to half,
and while the other half is being sent, we fill the other half
max_dsi_packet_size /= 2; */
max_data_per_packet = max_dsi_packet_size - 4 - 1;
max_pixels_per_packet = max_data_per_packet / bytespp;
DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet);
pixels_left = w * h;
DSSDBG("total pixels %d\n", pixels_left);
data += start_offset;
while (pixels_left > 0) {
/* 0x2c = write_memory_start */
/* 0x3c = write_memory_continue */
u8 dcs_cmd = first ? 0x2c : 0x3c;
int pixels;
DSI_DECL_VARS;
first = 0;
#if 1
/* using fifo not empty */
/* TX_FIFO_NOT_EMPTY */
while (FLD_GET(dsi_read_reg(dsidev, DSI_VC_CTRL(0)), 5, 5)) {
fifo_stalls++;
if (fifo_stalls > 0xfffff) {
DSSERR("fifo stalls overflow, pixels left %d\n",
pixels_left);
dsi_if_enable(dsidev, 0);
return -EIO;
}
udelay(1);
}
#elif 1
/* using fifo emptiness */
while ((REG_GET(dsidev, DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 <
max_dsi_packet_size) {
fifo_stalls++;
if (fifo_stalls > 0xfffff) {
DSSERR("fifo stalls overflow, pixels left %d\n",
pixels_left);
dsi_if_enable(dsidev, 0);
return -EIO;
}
}
#else
while ((REG_GET(dsidev, DSI_TX_FIFO_VC_EMPTINESS,
7, 0) + 1) * 4 == 0) {
fifo_stalls++;
if (fifo_stalls > 0xfffff) {
DSSERR("fifo stalls overflow, pixels left %d\n",
pixels_left);
dsi_if_enable(dsidev, 0);
return -EIO;
}
}
#endif
pixels = min(max_pixels_per_packet, pixels_left);
pixels_left -= pixels;
dsi_vc_write_long_header(dsidev, 0, DSI_DT_DCS_LONG_WRITE,
1 + pixels * bytespp, 0);
DSI_PUSH(dsidev, 0, dcs_cmd);
while (pixels-- > 0) {
u32 pix = __raw_readl(data++);
DSI_PUSH(dsidev, 0, (pix >> 16) & 0xff);
DSI_PUSH(dsidev, 0, (pix >> 8) & 0xff);
DSI_PUSH(dsidev, 0, (pix >> 0) & 0xff);
current_x++;
if (current_x == x+w) {
current_x = x;
data += horiz_inc;
}
}
DSI_FLUSH(dsidev, 0);
}
return 0;
}
static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned bytespp;
unsigned bytespl;
unsigned bytespf;
unsigned total_len;
unsigned packet_payload;
unsigned packet_len;
u32 l;
int r;
const unsigned channel = dsi->update_channel;
const unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
x, y, w, h);
dsi_vc_config_vp(dsidev, channel);
bytespp = dssdev->ctrl.pixel_size / 8;
bytespl = w * bytespp;
bytespf = bytespl * h;
/* NOTE: packet_payload has to be equal to N * bytespl, where N is
* number of lines in a packet. See errata about VP_CLK_RATIO */
if (bytespf < line_buf_size)
packet_payload = bytespf;
else
packet_payload = (line_buf_size) / bytespl * bytespl;
packet_len = packet_payload + 1; /* 1 byte for DCS cmd */
total_len = (bytespf / packet_payload) * packet_len;
if (bytespf % packet_payload)
total_len += (bytespf % packet_payload) + 1;
l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
dsi_write_reg(dsidev, DSI_VC_TE(channel), l);
dsi_vc_write_long_header(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
packet_len, 0);
if (dsi->te_enabled)
l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
else
l = FLD_MOD(l, 1, 31, 31); /* TE_START */
dsi_write_reg(dsidev, DSI_VC_TE(channel), l);
/* We put SIDLEMODE to no-idle for the duration of the transfer,
* because DSS interrupts are not capable of waking up the CPU and the
* framedone interrupt could be delayed for quite a long time. I think
* the same goes for any DSS interrupts, but for some reason I have not
* seen the problem anywhere else than here.
*/
dispc_disable_sidle();
dsi_perf_mark_start(dsidev);
r = schedule_delayed_work(&dsi->framedone_timeout_work,
msecs_to_jiffies(250));
BUG_ON(r == 0);
dss_start_update(dssdev);
if (dsi->te_enabled) {
/* disable LP_RX_TO, so that we can receive TE. Time to wait
* for TE is longer than the timer allows */
REG_FLD_MOD(dsidev, DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
dsi_vc_send_bta(dsidev, channel);
#ifdef DSI_CATCH_MISSING_TE
mod_timer(&dsi->te_timer, jiffies + msecs_to_jiffies(250));
#endif
}
}
#ifdef DSI_CATCH_MISSING_TE
static void dsi_te_timeout(unsigned long arg)
{
DSSERR("TE not received for 250ms!\n");
}
#endif
static void dsi_handle_framedone(struct platform_device *dsidev, int error)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
/* SIDLEMODE back to smart-idle */
dispc_enable_sidle();
if (dsi->te_enabled) {
/* enable LP_RX_TO again after the TE */
REG_FLD_MOD(dsidev, DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
}
dsi->framedone_callback(error, dsi->framedone_data);
if (!error)
dsi_perf_show(dsidev, "DISPC");
}
static void dsi_framedone_timeout_work_callback(struct work_struct *work)
{
struct dsi_data *dsi = container_of(work, struct dsi_data,
framedone_timeout_work.work);
/* XXX While extremely unlikely, we could get FRAMEDONE interrupt after
* 250ms which would conflict with this timeout work. What should be
* done is first cancel the transfer on the HW, and then cancel the
* possibly scheduled framedone work. However, cancelling the transfer
* on the HW is buggy, and would probably require resetting the whole
* DSI */
DSSERR("Framedone not received for 250ms!\n");
dsi_handle_framedone(dsi->pdev, -ETIMEDOUT);
}
static void dsi_framedone_irq_callback(void *data, u32 mask)
{
struct omap_dss_device *dssdev = (struct omap_dss_device *) data;
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
* turns itself off. However, DSI still has the pixels in its buffers,
* and is sending the data.
*/
__cancel_delayed_work(&dsi->framedone_timeout_work);
dsi_handle_framedone(dsidev, 0);
OMAP: DSS2: DSI: Introduce sync_vc functions The DSI protocol engine has no interrupt for signalling the end of a Frame transfer. The present approach is to send a BTA after DISPC generates a FRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received. The assumption made with this approach was that OMAP will send a BTA only after the long packet corresponding to the last line is sent. However, it is possible that on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data in the DSI line buffer. Hence, the BTA Ack could be received for the long packet corresponding to the second last line (or the third last and so on..). Therefore, the current method doesn't ensure that the complete frame data is sent before we start a new transfer. A similar explanation holds valid if we send a BTA in between multiple short/long command packets from the slave port. Introduce dsi_sync_vc functions, based on Tomi Valkeinen's idea, which ensure that the DSI Virtual Channel in use(update_channel) completes its previous work before proceeding to the next Frame/Command. For a frame update, the DSI driver now sends a callback to the Panel Driver on the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks the bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and dsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is completed. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-23 16:59:34 +07:00
#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
dispc_fake_vsync_irq();
#endif
}
int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
u16 *x, u16 *y, u16 *w, u16 *h,
bool enlarge_update_area)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
u16 dw, dh;
dssdev->driver->get_resolution(dssdev, &dw, &dh);
if (*x > dw || *y > dh)
return -EINVAL;
if (*x + *w > dw)
return -EINVAL;
if (*y + *h > dh)
return -EINVAL;
if (*w == 1)
return -EINVAL;
if (*w == 0 || *h == 0)
return -EINVAL;
dsi_perf_mark_setup(dsidev);
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
dss_setup_partial_planes(dssdev, x, y, w, h,
enlarge_update_area);
dispc_set_lcd_size(dssdev->manager->id, *w, *h);
}
return 0;
}
EXPORT_SYMBOL(omap_dsi_prepare_update);
int omap_dsi_update(struct omap_dss_device *dssdev,
int channel,
u16 x, u16 y, u16 w, u16 h,
void (*callback)(int, void *), void *data)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->update_channel = channel;
/* OMAP DSS cannot send updates of odd widths.
* omap_dsi_prepare_update() makes the widths even, but add a BUG_ON
* here to make sure we catch erroneous updates. Otherwise we'll only
* see rather obscure HW error happening, as DSS halts. */
BUG_ON(x % 2 == 1);
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
dsi->framedone_callback = callback;
dsi->framedone_data = data;
dsi->update_region.x = x;
dsi->update_region.y = y;
dsi->update_region.w = w;
dsi->update_region.h = h;
dsi->update_region.device = dssdev;
dsi_update_screen_dispc(dssdev, x, y, w, h);
} else {
int r;
r = dsi_update_screen_l4(dssdev, x, y, w, h);
if (r)
return r;
dsi_perf_show(dsidev, "L4");
callback(0, data);
}
return 0;
}
EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
{
int r;
u32 irq;
irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
r = omap_dispc_register_isr(dsi_framedone_irq_callback, (void *) dssdev,
irq);
if (r) {
DSSERR("can't get FRAMEDONE irq\n");
return r;
}
dispc_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
dispc_set_parallel_interface_mode(dssdev->manager->id,
OMAP_DSS_PARALLELMODE_DSI);
dispc_enable_fifohandcheck(dssdev->manager->id, 1);
dispc_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
{
struct omap_video_timings timings = {
.hsw = 1,
.hfp = 1,
.hbp = 1,
.vsw = 1,
.vfp = 0,
.vbp = 0,
};
dispc_set_lcd_timings(dssdev->manager->id, &timings);
}
return 0;
}
static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
{
u32 irq;
irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
omap_dispc_unregister_isr(dsi_framedone_irq_callback, (void *) dssdev,
irq);
}
static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_clock_info cinfo;
int r;
/* we always use DSS_CLK_SYSCK as input clock */
cinfo.use_sys_clk = true;
cinfo.regn = dssdev->clocks.dsi.regn;
cinfo.regm = dssdev->clocks.dsi.regm;
cinfo.regm_dispc = dssdev->clocks.dsi.regm_dispc;
cinfo.regm_dsi = dssdev->clocks.dsi.regm_dsi;
r = dsi_calc_clock_rates(dssdev, &cinfo);
if (r) {
DSSERR("Failed to calc dsi clocks\n");
return r;
}
r = dsi_pll_set_clock_div(dsidev, &cinfo);
if (r) {
DSSERR("Failed to set dsi clocks\n");
return r;
}
return 0;
}
static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dispc_clock_info dispc_cinfo;
int r;
unsigned long long fck;
fck = dsi_get_pll_hsdiv_dispc_rate(dsidev);
dispc_cinfo.lck_div = dssdev->clocks.dispc.channel.lck_div;
dispc_cinfo.pck_div = dssdev->clocks.dispc.channel.pck_div;
r = dispc_calc_clock_rates(fck, &dispc_cinfo);
if (r) {
DSSERR("Failed to calc dispc clocks\n");
return r;
}
r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) {
DSSERR("Failed to set dispc clocks\n");
return r;
}
return 0;
}
static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int dsi_module = dsi_get_dsidev_id(dsidev);
int r;
r = dsi_pll_init(dsidev, true, true);
if (r)
goto err0;
r = dsi_configure_dsi_clocks(dssdev);
if (r)
goto err1;
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
dss_select_dsi_clk_source(dsi_module, dssdev->clocks.dsi.dsi_fclk_src);
dss_select_lcd_clk_source(dssdev->manager->id,
dssdev->clocks.dispc.channel.lcd_clk_src);
DSSDBG("PLL OK\n");
r = dsi_configure_dispc_clocks(dssdev);
if (r)
goto err2;
r = dsi_cio_init(dssdev);
if (r)
goto err2;
_dsi_print_reset_status(dsidev);
dsi_proto_timings(dssdev);
dsi_set_lp_clk_divisor(dssdev);
if (1)
_dsi_print_reset_status(dsidev);
r = dsi_proto_config(dssdev);
if (r)
goto err3;
/* enable interface */
dsi_vc_enable(dsidev, 0, 1);
dsi_vc_enable(dsidev, 1, 1);
dsi_vc_enable(dsidev, 2, 1);
dsi_vc_enable(dsidev, 3, 1);
dsi_if_enable(dsidev, 1);
dsi_force_tx_stop_mode_io(dsidev);
return 0;
err3:
dsi_cio_uninit(dsidev);
err2:
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
err1:
dsi_pll_uninit(dsidev, true);
err0:
return r;
}
static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
bool disconnect_lanes, bool enter_ulps)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int dsi_module = dsi_get_dsidev_id(dsidev);
if (enter_ulps && !dsi->ulps_enabled)
dsi_enter_ulps(dsidev);
/* disable interface */
dsi_if_enable(dsidev, 0);
dsi_vc_enable(dsidev, 0, 0);
dsi_vc_enable(dsidev, 1, 0);
dsi_vc_enable(dsidev, 2, 0);
dsi_vc_enable(dsidev, 3, 0);
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
dsi_cio_uninit(dsidev);
dsi_pll_uninit(dsidev, disconnect_lanes);
}
static int dsi_core_init(struct platform_device *dsidev)
{
/* Autoidle */
REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 0, 0);
/* ENWAKEUP */
REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 2, 2);
/* SIDLEMODE smart-idle */
REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 2, 4, 3);
_dsi_initialize_irq(dsidev);
return 0;
}
int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int r = 0;
DSSDBG("dsi_display_enable\n");
WARN_ON(!dsi_bus_is_locked(dsidev));
mutex_lock(&dsi->lock);
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
goto err0;
}
enable_clocks(1);
dsi_enable_pll_clock(dsidev, 1);
r = _dsi_reset(dsidev);
if (r)
goto err1;
dsi_core_init(dsidev);
r = dsi_display_init_dispc(dssdev);
if (r)
goto err1;
r = dsi_display_init_dsi(dssdev);
if (r)
goto err2;
mutex_unlock(&dsi->lock);
return 0;
err2:
dsi_display_uninit_dispc(dssdev);
err1:
enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
omap_dss_stop_device(dssdev);
err0:
mutex_unlock(&dsi->lock);
DSSDBG("dsi_display_enable FAILED\n");
return r;
}
EXPORT_SYMBOL(omapdss_dsi_display_enable);
void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
bool disconnect_lanes, bool enter_ulps)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
DSSDBG("dsi_display_disable\n");
WARN_ON(!dsi_bus_is_locked(dsidev));
mutex_lock(&dsi->lock);
dsi_display_uninit_dispc(dssdev);
dsi_display_uninit_dsi(dssdev, disconnect_lanes, enter_ulps);
enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
omap_dss_stop_device(dssdev);
mutex_unlock(&dsi->lock);
}
EXPORT_SYMBOL(omapdss_dsi_display_disable);
int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->te_enabled = enable;
return 0;
}
EXPORT_SYMBOL(omapdss_dsi_enable_te);
void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
u32 fifo_size, enum omap_burst_size *burst_size,
u32 *fifo_low, u32 *fifo_high)
{
unsigned burst_size_bytes;
*burst_size = OMAP_DSS_BURST_16x32;
burst_size_bytes = 16 * 32 / 8;
*fifo_high = fifo_size - burst_size_bytes;
*fifo_low = fifo_size - burst_size_bytes * 2;
}
int dsi_init_display(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int dsi_module = dsi_get_dsidev_id(dsidev);
DSSDBG("DSI init\n");
/* XXX these should be figured out dynamically */
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
if (dsi->vdds_dsi_reg == NULL) {
struct regulator *vdds_dsi;
vdds_dsi = regulator_get(&dsi->pdev->dev, "vdds_dsi");
if (IS_ERR(vdds_dsi)) {
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
}
dsi->vdds_dsi_reg = vdds_dsi;
}
if (dsi_get_num_data_lanes_dssdev(dssdev) > dsi->num_data_lanes) {
DSSERR("DSI%d can't support more than %d data lanes\n",
dsi_module + 1, dsi->num_data_lanes);
return -EINVAL;
}
return 0;
}
int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int i;
for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
if (!dsi->vc[i].dssdev) {
dsi->vc[i].dssdev = dssdev;
*channel = i;
return 0;
}
}
DSSERR("cannot get VC for display %s", dssdev->name);
return -ENOSPC;
}
EXPORT_SYMBOL(omap_dsi_request_vc);
int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (vc_id < 0 || vc_id > 3) {
DSSERR("VC ID out of range\n");
return -EINVAL;
}
if (channel < 0 || channel > 3) {
DSSERR("Virtual Channel out of range\n");
return -EINVAL;
}
if (dsi->vc[channel].dssdev != dssdev) {
DSSERR("Virtual Channel not allocated to display %s\n",
dssdev->name);
return -EINVAL;
}
dsi->vc[channel].vc_id = vc_id;
return 0;
}
EXPORT_SYMBOL(omap_dsi_set_vc_id);
void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if ((channel >= 0 && channel <= 3) &&
dsi->vc[channel].dssdev == dssdev) {
dsi->vc[channel].dssdev = NULL;
dsi->vc[channel].vc_id = 0;
}
}
EXPORT_SYMBOL(omap_dsi_release_vc);
void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev)
{
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 7, 1) != 1)
DSSERR("%s (%s) not active\n",
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC));
}
void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev)
{
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 8, 1) != 1)
DSSERR("%s (%s) not active\n",
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI));
}
static void dsi_calc_clock_param_ranges(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi->regn_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGN);
dsi->regm_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM);
dsi->regm_dispc_max =
dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM_DISPC);
dsi->regm_dsi_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM_DSI);
dsi->fint_min = dss_feat_get_param_min(FEAT_PARAM_DSIPLL_FINT);
dsi->fint_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_FINT);
dsi->lpdiv_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_LPDIV);
}
static int dsi_init(struct platform_device *dsidev)
{
struct omap_display_platform_data *dss_plat_data;
struct omap_dss_board_info *board_info;
u32 rev;
int r, i, dsi_module = dsi_get_dsidev_id(dsidev);
struct resource *dsi_mem;
struct dsi_data *dsi;
dsi = kzalloc(sizeof(*dsi), GFP_KERNEL);
if (!dsi) {
r = -ENOMEM;
goto err0;
}
dsi->pdev = dsidev;
dsi_pdev_map[dsi_module] = dsidev;
dev_set_drvdata(&dsidev->dev, dsi);
dss_plat_data = dsidev->dev.platform_data;
board_info = dss_plat_data->board_data;
dsi->dsi_mux_pads = board_info->dsi_mux_pads;
spin_lock_init(&dsi->irq_lock);
spin_lock_init(&dsi->errors_lock);
dsi->errors = 0;
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
spin_lock_init(&dsi->irq_stats_lock);
dsi->irq_stats.last_reset = jiffies;
#endif
mutex_init(&dsi->lock);
sema_init(&dsi->bus_lock, 1);
INIT_DELAYED_WORK_DEFERRABLE(&dsi->framedone_timeout_work,
dsi_framedone_timeout_work_callback);
#ifdef DSI_CATCH_MISSING_TE
init_timer(&dsi->te_timer);
dsi->te_timer.function = dsi_te_timeout;
dsi->te_timer.data = 0;
#endif
dsi_mem = platform_get_resource(dsi->pdev, IORESOURCE_MEM, 0);
if (!dsi_mem) {
DSSERR("can't get IORESOURCE_MEM DSI\n");
r = -EINVAL;
goto err1;
}
dsi->base = ioremap(dsi_mem->start, resource_size(dsi_mem));
if (!dsi->base) {
DSSERR("can't ioremap DSI\n");
r = -ENOMEM;
goto err1;
}
dsi->irq = platform_get_irq(dsi->pdev, 0);
if (dsi->irq < 0) {
DSSERR("platform_get_irq failed\n");
r = -ENODEV;
goto err2;
}
r = request_irq(dsi->irq, omap_dsi_irq_handler, IRQF_SHARED,
dev_name(&dsidev->dev), dsi->pdev);
if (r < 0) {
DSSERR("request_irq failed\n");
goto err2;
}
/* DSI VCs initialization */
for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
dsi->vc[i].mode = DSI_VC_MODE_L4;
dsi->vc[i].dssdev = NULL;
dsi->vc[i].vc_id = 0;
}
dsi_calc_clock_param_ranges(dsidev);
enable_clocks(1);
rev = dsi_read_reg(dsidev, DSI_REVISION);
dev_dbg(&dsidev->dev, "OMAP DSI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
dsi->num_data_lanes = dsi_get_num_data_lanes(dsidev);
enable_clocks(0);
return 0;
err2:
iounmap(dsi->base);
err1:
kfree(dsi);
err0:
return r;
}
static void dsi_exit(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dsi->vdds_dsi_reg != NULL) {
if (dsi->vdds_dsi_enabled) {
regulator_disable(dsi->vdds_dsi_reg);
dsi->vdds_dsi_enabled = false;
}
regulator_put(dsi->vdds_dsi_reg);
dsi->vdds_dsi_reg = NULL;
}
free_irq(dsi->irq, dsi->pdev);
iounmap(dsi->base);
kfree(dsi);
DSSDBG("omap_dsi_exit\n");
}
/* DSI1 HW IP initialisation */
static int omap_dsi1hw_probe(struct platform_device *dsidev)
{
int r;
r = dsi_init(dsidev);
if (r) {
DSSERR("Failed to initialize DSI\n");
goto err_dsi;
}
err_dsi:
return r;
}
static int omap_dsi1hw_remove(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
dsi_exit(dsidev);
WARN_ON(dsi->scp_clk_refcount > 0);
return 0;
}
static struct platform_driver omap_dsi1hw_driver = {
.probe = omap_dsi1hw_probe,
.remove = omap_dsi1hw_remove,
.driver = {
.name = "omapdss_dsi1",
.owner = THIS_MODULE,
},
};
int dsi_init_platform_driver(void)
{
return platform_driver_register(&omap_dsi1hw_driver);
}
void dsi_uninit_platform_driver(void)
{
return platform_driver_unregister(&omap_dsi1hw_driver);
}