linux_dsm_epyc7002/include/linux/tty.h

738 lines
25 KiB
C
Raw Normal View History

#ifndef _LINUX_TTY_H
#define _LINUX_TTY_H
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
#include <linux/rwsem.h>
#include <linux/llist.h>
/*
* Lock subclasses for tty locks
*
* TTY_LOCK_NORMAL is for normal ttys and master ptys.
* TTY_LOCK_SLAVE is for slave ptys only.
*
* Lock subclasses are necessary for handling nested locking with pty pairs.
* tty locks which use nested locking:
*
* legacy_mutex - Nested tty locks are necessary for releasing pty pairs.
* The stable lock order is master pty first, then slave pty.
* termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem.
* Subclassing this lock enables the slave pty to hold its
* termios_rwsem when claiming the master tty_buffer lock.
* tty_buffer lock - slave ptys can claim nested buffer lock when handling
* signal chars. The stable lock order is slave pty, then
* master.
*/
enum {
TTY_LOCK_NORMAL = 0,
TTY_LOCK_SLAVE,
};
/*
* (Note: the *_driver.minor_start values 1, 64, 128, 192 are
* hardcoded at present.)
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_RESERVE 1024 /* Default reserve for main devpts */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
* isn't in use (eg VINTR has no character etc)
*/
#define __DISABLED_CHAR '\0'
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 11:54:13 +07:00
struct tty_buffer {
union {
struct tty_buffer *next;
struct llist_node free;
};
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 11:54:13 +07:00
int used;
int size;
int commit;
int read;
int flags;
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 11:54:13 +07:00
/* Data points here */
unsigned long data[0];
};
/* Values for .flags field of tty_buffer */
#define TTYB_NORMAL 1 /* buffer has no flags buffer */
static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
{
return ((unsigned char *)b->data) + ofs;
}
static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
{
return (char *)char_buf_ptr(b, ofs) + b->size;
}
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 11:54:13 +07:00
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex lock;
atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t mem_used; /* In-use buffers excluding free list */
int mem_limit;
struct tty_buffer *tail; /* Active buffer */
};
/*
* When a break, frame error, or parity error happens, these codes are
* stuffed into the flags buffer.
*/
#define TTY_NORMAL 0
#define TTY_BREAK 1
#define TTY_FRAME 2
#define TTY_PARITY 3
#define TTY_OVERRUN 4
#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
#define I_IGNPAR(tty) _I_FLAG((tty), IGNPAR)
#define I_PARMRK(tty) _I_FLAG((tty), PARMRK)
#define I_INPCK(tty) _I_FLAG((tty), INPCK)
#define I_ISTRIP(tty) _I_FLAG((tty), ISTRIP)
#define I_INLCR(tty) _I_FLAG((tty), INLCR)
#define I_IGNCR(tty) _I_FLAG((tty), IGNCR)
#define I_ICRNL(tty) _I_FLAG((tty), ICRNL)
#define I_IUCLC(tty) _I_FLAG((tty), IUCLC)
#define I_IXON(tty) _I_FLAG((tty), IXON)
#define I_IXANY(tty) _I_FLAG((tty), IXANY)
#define I_IXOFF(tty) _I_FLAG((tty), IXOFF)
#define I_IMAXBEL(tty) _I_FLAG((tty), IMAXBEL)
#define I_IUTF8(tty) _I_FLAG((tty), IUTF8)
#define O_OPOST(tty) _O_FLAG((tty), OPOST)
#define O_OLCUC(tty) _O_FLAG((tty), OLCUC)
#define O_ONLCR(tty) _O_FLAG((tty), ONLCR)
#define O_OCRNL(tty) _O_FLAG((tty), OCRNL)
#define O_ONOCR(tty) _O_FLAG((tty), ONOCR)
#define O_ONLRET(tty) _O_FLAG((tty), ONLRET)
#define O_OFILL(tty) _O_FLAG((tty), OFILL)
#define O_OFDEL(tty) _O_FLAG((tty), OFDEL)
#define O_NLDLY(tty) _O_FLAG((tty), NLDLY)
#define O_CRDLY(tty) _O_FLAG((tty), CRDLY)
#define O_TABDLY(tty) _O_FLAG((tty), TABDLY)
#define O_BSDLY(tty) _O_FLAG((tty), BSDLY)
#define O_VTDLY(tty) _O_FLAG((tty), VTDLY)
#define O_FFDLY(tty) _O_FLAG((tty), FFDLY)
#define C_BAUD(tty) _C_FLAG((tty), CBAUD)
#define C_CSIZE(tty) _C_FLAG((tty), CSIZE)
#define C_CSTOPB(tty) _C_FLAG((tty), CSTOPB)
#define C_CREAD(tty) _C_FLAG((tty), CREAD)
#define C_PARENB(tty) _C_FLAG((tty), PARENB)
#define C_PARODD(tty) _C_FLAG((tty), PARODD)
#define C_HUPCL(tty) _C_FLAG((tty), HUPCL)
#define C_CLOCAL(tty) _C_FLAG((tty), CLOCAL)
#define C_CIBAUD(tty) _C_FLAG((tty), CIBAUD)
#define C_CRTSCTS(tty) _C_FLAG((tty), CRTSCTS)
#define C_CMSPAR(tty) _C_FLAG((tty), CMSPAR)
#define L_ISIG(tty) _L_FLAG((tty), ISIG)
#define L_ICANON(tty) _L_FLAG((tty), ICANON)
#define L_XCASE(tty) _L_FLAG((tty), XCASE)
#define L_ECHO(tty) _L_FLAG((tty), ECHO)
#define L_ECHOE(tty) _L_FLAG((tty), ECHOE)
#define L_ECHOK(tty) _L_FLAG((tty), ECHOK)
#define L_ECHONL(tty) _L_FLAG((tty), ECHONL)
#define L_NOFLSH(tty) _L_FLAG((tty), NOFLSH)
#define L_TOSTOP(tty) _L_FLAG((tty), TOSTOP)
#define L_ECHOCTL(tty) _L_FLAG((tty), ECHOCTL)
#define L_ECHOPRT(tty) _L_FLAG((tty), ECHOPRT)
#define L_ECHOKE(tty) _L_FLAG((tty), ECHOKE)
#define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO)
#define L_PENDIN(tty) _L_FLAG((tty), PENDIN)
#define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN)
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 00:14:49 +07:00
#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC)
struct device;
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
struct signal_struct;
/*
* Port level information. Each device keeps its own port level information
* so provide a common structure for those ports wanting to use common support
* routines.
*
* The tty port has a different lifetime to the tty so must be kept apart.
* In addition be careful as tty -> port mappings are valid for the life
* of the tty object but in many cases port -> tty mappings are valid only
* until a hangup so don't use the wrong path.
*/
struct tty_port;
struct tty_port_operations {
/* Return 1 if the carrier is raised */
int (*carrier_raised)(struct tty_port *port);
/* Control the DTR line */
void (*dtr_rts)(struct tty_port *port, int raise);
/* Called when the last close completes or a hangup finishes
IFF the port was initialized. Do not use to free resources. Called
under the port mutex to serialize against activate/shutdowns */
void (*shutdown)(struct tty_port *port);
/* Called under the port mutex from tty_port_open, serialized using
the port mutex */
/* FIXME: long term getting the tty argument *out* of this would be
good for consoles */
int (*activate)(struct tty_port *port, struct tty_struct *tty);
/* Called on the final put of a port */
void (*destruct)(struct tty_port *port);
};
struct tty_port {
struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* User TTY flags ASYNC_ */
unsigned long iflags; /* Internal flags TTY_PORT_ */
unsigned char console:1, /* port is a console */
tty: Fix low_latency BUG The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db89799bdf11625a831c5af33938dcb11908b6, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by: Beat Bolli <bbolli@ewanet.ch> Reported-by: Pavel Roskin <proski@gnu.org> Acked-by: David Sterba <dsterba@suse.cz> Cc: Grant Edwards <grant.b.edwards@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net> Cc: <stable@vger.kernel.org> # 3.12.x+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22 19:31:21 +07:00
low_latency:1; /* optional: tune for latency */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
unsigned char *xmit_buf; /* Optional buffer */
unsigned int close_delay; /* Close port delay */
unsigned int closing_wait; /* Delay for output */
int drain_delay; /* Set to zero if no pure time
based drain is needed else
set to size of fifo */
struct kref kref; /* Ref counter */
};
/* tty_port::iflags bits -- use atomic bit ops */
#define TTY_PORT_INITIALIZED 0 /* device is initialized */
#define TTY_PORT_SUSPENDED 1 /* device is suspended */
#define TTY_PORT_ACTIVE 2 /* device is open */
/*
* uart drivers: use the uart_port::status field and the UPSTAT_* defines
* for s/w-based flow control steering and carrier detection status
*/
#define TTY_PORT_CTS_FLOW 3 /* h/w flow control enabled */
#define TTY_PORT_CHECK_CD 4 /* carrier detect enabled */
/*
* Where all of the state associated with a tty is kept while the tty
* is open. Since the termios state should be kept even if the tty
* has been closed --- for things like the baud rate, etc --- it is
* not stored here, but rather a pointer to the real state is stored
* here. Possible the winsize structure should have the same
* treatment, but (1) the default 80x24 is usually right and (2) it's
* most often used by a windowing system, which will set the correct
* size each time the window is created or resized anyway.
* - TYT, 9/14/92
*/
struct tty_operations;
struct tty_struct {
int magic;
struct kref kref;
struct device *dev;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
/* Protects ldisc changes: Lock tty not pty */
struct ld_semaphore ldisc_sem;
struct tty_ldisc *ldisc;
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex throttle_mutex;
struct rw_semaphore termios_rwsem;
tty: Fix lock order in tty_do_resize() Commits 6a1c0680cf3ba94356ecd58833e1540c93472a57 and 9356b535fcb71db494fc434acceb79f56d15bda2, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25 03:43:51 +07:00
struct mutex winsize_mutex;
spinlock_t ctrl_lock;
spinlock_t flow_lock;
/* Termios values are protected by the termios rwsem */
struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
struct pid *session;
unsigned long flags;
int count;
tty: Fix lock order in tty_do_resize() Commits 6a1c0680cf3ba94356ecd58833e1540c93472a57 and 9356b535fcb71db494fc434acceb79f56d15bda2, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25 03:43:51 +07:00
struct winsize winsize; /* winsize_mutex */
unsigned long stopped:1, /* flow_lock */
flow_stopped:1,
unused:BITS_PER_LONG - 2;
int hw_stopped;
unsigned long ctrl_status:8, /* ctrl_lock */
packet:1,
unused_ctrl:BITS_PER_LONG - 9;
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 11:54:13 +07:00
unsigned int receive_room; /* Bytes free for queue */
int flow_change;
struct tty_struct *link;
struct fasync_struct *fasync;
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
struct work_struct hangup_work;
void *disc_data;
void *driver_data;
spinlock_t files_lock; /* protects tty_files list */
struct list_head tty_files;
#define N_TTY_BUF_SIZE 4096
int closing;
unsigned char *write_buf;
int write_cnt;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
};
tty: fix fu_list abuse tty: fix fu_list abuse tty code abuses fu_list, which causes a bug in remount,ro handling. If a tty device node is opened on a filesystem, then the last link to the inode removed, the filesystem will be allowed to be remounted readonly. This is because fs_may_remount_ro does not find the 0 link tty inode on the file sb list (because the tty code incorrectly removed it to use for its own purpose). This can result in a filesystem with errors after it is marked "clean". Taking idea from Christoph's initial patch, allocate a tty private struct at file->private_data and put our required list fields in there, linking file and tty. This makes tty nodes behave the same way as other device nodes and avoid meddling with the vfs, and avoids this bug. The error handling is not trivial in the tty code, so for this bugfix, I take the simple approach of using __GFP_NOFAIL and don't worry about memory errors. This is not a problem because our allocator doesn't fail small allocs as a rule anyway. So proper error handling is left as an exercise for tty hackers. [ Arguably filesystem's device inode would ideally be divorced from the driver's pseudo inode when it is opened, but in practice it's not clear whether that will ever be worth implementing. ] Cc: linux-kernel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 01:37:36 +07:00
/* Each of a tty's open files has private_data pointing to tty_file_private */
struct tty_file_private {
struct tty_struct *tty;
struct file *file;
struct list_head list;
};
/* tty magic number */
#define TTY_MAGIC 0x5401
/*
* These bits are used in the flags field of the tty structure.
*
* So that interrupts won't be able to mess up the queues,
* copy_to_cooked must be atomic with respect to itself, as must
* tty->write. Thus, you must use the inline functions set_bit() and
* clear_bit() to make things atomic.
*/
#define TTY_THROTTLED 0 /* Call unthrottle() at threshold min */
#define TTY_IO_ERROR 1 /* Cause an I/O error (may be no ldisc too) */
#define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_LDISC_HALTED 22 /* Line discipline is halted */
/* Values for tty->flow_change */
#define TTY_THROTTLE_SAFE 1
#define TTY_UNTHROTTLE_SAFE 2
static inline void __tty_set_flow_change(struct tty_struct *tty, int val)
{
tty->flow_change = val;
}
static inline void tty_set_flow_change(struct tty_struct *tty, int val)
{
tty->flow_change = val;
smp_mb();
}
static inline bool tty_io_error(struct tty_struct *tty)
{
return test_bit(TTY_IO_ERROR, &tty->flags);
}
static inline bool tty_throttled(struct tty_struct *tty)
{
return test_bit(TTY_THROTTLED, &tty->flags);
}
#ifdef CONFIG_TTY
extern void console_init(void);
extern void tty_kref_put(struct tty_struct *tty);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern void tty_vhangup_self(void);
extern void disassociate_ctty(int priv);
extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
/* tty_io.c */
extern int __init tty_init(void);
extern const char *tty_name(const struct tty_struct *tty);
#else
static inline void console_init(void)
{ }
static inline void tty_kref_put(struct tty_struct *tty)
{ }
static inline struct pid *tty_get_pgrp(struct tty_struct *tty)
{ return NULL; }
static inline void tty_vhangup_self(void)
{ }
static inline void disassociate_ctty(int priv)
{ }
static inline dev_t tty_devnum(struct tty_struct *tty)
{ return 0; }
static inline void proc_clear_tty(struct task_struct *p)
{ }
static inline struct tty_struct *get_current_tty(void)
{ return NULL; }
/* tty_io.c */
static inline int __init tty_init(void)
{ return 0; }
static inline const char *tty_name(const struct tty_struct *tty)
{ return "(none)"; }
#endif
extern struct ktermios tty_std_termios;
extern int vcs_init(void);
extern struct class *tty_class;
/**
* tty_kref_get - get a tty reference
* @tty: tty device
*
* Return a new reference to a tty object. The caller must hold
* sufficient locks/counts to ensure that their existing reference cannot
* go away
*/
static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
{
if (tty)
kref_get(&tty->kref);
return tty;
}
extern const char *tty_driver_name(const struct tty_struct *tty);
extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
extern int __tty_check_change(struct tty_struct *tty, int sig);
extern int tty_check_change(struct tty_struct *tty);
extern void __stop_tty(struct tty_struct *tty);
extern void stop_tty(struct tty_struct *tty);
extern void __start_tty(struct tty_struct *tty);
extern void start_tty(struct tty_struct *tty);
extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
extern struct device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *dev);
extern struct device *tty_register_device_attr(struct tty_driver *driver,
unsigned index, struct device *device,
void *drvdata,
const struct attribute_group **attr_grp);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
extern void tty_write_message(struct tty_struct *tty, char *msg);
extern int tty_send_xchar(struct tty_struct *tty, char ch);
extern int tty_put_char(struct tty_struct *tty, unsigned char c);
extern int tty_chars_in_buffer(struct tty_struct *tty);
extern int tty_write_room(struct tty_struct *tty);
extern void tty_driver_flush_buffer(struct tty_struct *tty);
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_throttle_safe(struct tty_struct *tty);
extern int tty_unthrottle_safe(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
extern int is_current_pgrp_orphaned(void);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
extern void no_tty(void);
extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
extern void tty_buffer_init(struct tty_port *port);
extern void tty_buffer_set_lock_subclass(struct tty_port *port);
extern bool tty_buffer_restart_work(struct tty_port *port);
extern bool tty_buffer_cancel_work(struct tty_port *port);
extern void tty_buffer_flush_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
speed_t ibaud, speed_t obaud);
extern void tty_encode_baud_rate(struct tty_struct *tty,
speed_t ibaud, speed_t obaud);
/**
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
*
* Locking: none
*/
static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
{
return tty_termios_baud_rate(&tty->termios);
}
2007-10-17 13:30:07 +07:00
extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
tty: Destroy ldisc instance on hangup Currently, when the tty is hungup, the ldisc is re-instanced; ie., the current instance is destroyed and a new instance is created. The purpose of this design was to guarantee a valid, open ldisc for the lifetime of the tty. However, now that tty buffers are owned by and have lifetime equivalent to the tty_port (since v3.10), any data received immediately after the ldisc is re-instanced may cause continued driver i/o operations concurrently with the driver's hangup() operation. For drivers that shutdown h/w on hangup, this is unexpected and usually bad. For example, the serial core may free the xmit buffer page concurrently with an in-progress write() operation (triggered by echo). With the existing stable and robust ldisc reference handling, the cleaned-up tty_reopen(), the straggling unsafe ldisc use cleaned up, and the preparation to properly handle a NULL tty->ldisc, the ldisc instance can be destroyed and only re-instanced when the tty is re-opened. If the tty was opened as /dev/console or /dev/tty0, the original behavior of re-instancing the ldisc is retained (the 'reinit' parameter to tty_ldisc_hangup() is true). This is required since those file descriptors are never hungup. This patch has neglible impact on userspace; the tty file_operations ptr is changed to point to the hungup file operations _before_ the ldisc instance is destroyed, so only racing file operations might now retrieve a NULL ldisc reference (which is simply handled as if the hungup file operation had been called instead -- see "tty: Prepare for destroying line discipline on hangup"). This resolves a long-standing FIXME and several crash reports. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-11 13:41:06 +07:00
extern void tty_ldisc_hangup(struct tty_struct *tty, bool reset);
extern int tty_ldisc_reinit(struct tty_struct *tty, int disc);
extern const struct file_operations tty_ldiscs_proc_fops;
extern void tty_wakeup(struct tty_struct *tty);
extern void tty_ldisc_flush(struct tty_struct *tty);
extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx);
extern int tty_alloc_file(struct file *file);
extern void tty_add_file(struct tty_struct *tty, struct file *file);
extern void tty_free_file(struct file *file);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
extern int tty_release(struct inode *inode, struct file *filp);
extern void tty_init_termios(struct tty_struct *tty);
extern int tty_standard_install(struct tty_driver *driver,
struct tty_struct *tty);
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 17:36:04 +07:00
extern struct mutex tty_mutex;
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
extern void tty_port_init(struct tty_port *port);
extern void tty_port_link_device(struct tty_port *port,
struct tty_driver *driver, unsigned index);
extern struct device *tty_port_register_device(struct tty_port *port,
struct tty_driver *driver, unsigned index,
struct device *device);
extern struct device *tty_port_register_device_attr(struct tty_port *port,
struct tty_driver *driver, unsigned index,
struct device *device, void *drvdata,
const struct attribute_group **attr_grp);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_destroy(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
static inline struct tty_port *tty_port_get(struct tty_port *port)
{
if (port && kref_get_unless_zero(&port->kref))
return port;
return NULL;
}
/* If the cts flow control is enabled, return true. */
static inline bool tty_port_cts_enabled(struct tty_port *port)
{
return test_bit(TTY_PORT_CTS_FLOW, &port->iflags);
}
static inline void tty_port_set_cts_flow(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_CTS_FLOW, &port->iflags);
else
clear_bit(TTY_PORT_CTS_FLOW, &port->iflags);
}
static inline bool tty_port_active(struct tty_port *port)
{
return test_bit(TTY_PORT_ACTIVE, &port->iflags);
}
static inline void tty_port_set_active(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_ACTIVE, &port->iflags);
else
clear_bit(TTY_PORT_ACTIVE, &port->iflags);
}
static inline bool tty_port_check_carrier(struct tty_port *port)
{
return test_bit(TTY_PORT_CHECK_CD, &port->iflags);
}
static inline void tty_port_set_check_carrier(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_CHECK_CD, &port->iflags);
else
clear_bit(TTY_PORT_CHECK_CD, &port->iflags);
}
static inline bool tty_port_suspended(struct tty_port *port)
{
return test_bit(TTY_PORT_SUSPENDED, &port->iflags);
}
static inline void tty_port_set_suspended(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_SUSPENDED, &port->iflags);
else
clear_bit(TTY_PORT_SUSPENDED, &port->iflags);
}
static inline bool tty_port_initialized(struct tty_port *port)
{
return test_bit(TTY_PORT_INITIALIZED, &port->iflags);
}
static inline void tty_port_set_initialized(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_INITIALIZED, &port->iflags);
else
clear_bit(TTY_PORT_INITIALIZED, &port->iflags);
}
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_raise_dtr_rts(struct tty_port *port);
extern void tty_port_lower_dtr_rts(struct tty_port *port);
extern void tty_port_hangup(struct tty_port *port);
extern void tty_port_tty_hangup(struct tty_port *port, bool check_clocal);
extern void tty_port_tty_wakeup(struct tty_port *port);
extern int tty_port_block_til_ready(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern int tty_port_close_start(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
struct tty_struct *tty);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
static inline int tty_port_users(struct tty_port *port)
{
return port->count + port->blocked_open;
}
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_set_ldisc(struct tty_struct *tty, int disc);
extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
extern void tty_ldisc_release(struct tty_struct *tty);
extern void tty_ldisc_init(struct tty_struct *tty);
extern void tty_ldisc_deinit(struct tty_struct *tty);
extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
char *f, int count);
/* n_tty.c */
extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
extern void __init n_tty_init(void);
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size);
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
extern int tty_audit_push(void);
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
#else
static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size)
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
{
}
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
static inline void tty_audit_exit(void)
{
}
static inline void tty_audit_fork(struct signal_struct *sig)
{
}
static inline int tty_audit_push(void)
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
{
return 0;
Audit: add TTY input auditing Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 13:40:56 +07:00
}
#endif
/* tty_ioctl.c */
extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
/* vt.c */
extern int vt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
extern long vt_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
/* tty_mutex.c */
/* functions for preparation of BKL removal */
extern void tty_lock(struct tty_struct *tty);
extern int tty_lock_interruptible(struct tty_struct *tty);
extern void tty_unlock(struct tty_struct *tty);
extern void tty_lock_slave(struct tty_struct *tty);
extern void tty_unlock_slave(struct tty_struct *tty);
extern void tty_set_lock_subclass(struct tty_struct *tty);
#ifdef CONFIG_PROC_FS
extern void proc_tty_register_driver(struct tty_driver *);
extern void proc_tty_unregister_driver(struct tty_driver *);
#else
static inline void proc_tty_register_driver(struct tty_driver *d) {}
static inline void proc_tty_unregister_driver(struct tty_driver *d) {}
#endif
#define tty_msg(fn, tty, f, ...) \
fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__)
#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__)
#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__)
#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__)
#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__)
#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__)
#define tty_info_ratelimited(tty, f, ...) \
tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__)
#endif