AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 09:05:03 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
05dd7da769
linux_dsm_epyc7002/arch/powerpc/xmon/xmon.c

4200 lines
88 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 13:55:01 +07:00
// SPDX-License-Identifier: GPL-2.0-or-later
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* Routines providing a simple monitor for use on the PowerMac.
*
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
* Copyright (C) 1996-2005 Paul Mackerras.
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
* Copyright (C) 2001 PPC64 Team, IBM Corp
* Copyrignt (C) 2006 Michael Ellerman, IBM Corp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
powerpc/xmon: Add 'dt' command to dump trace buffers There is a nice interface for asking ftrace to dump all its tracing buffers. The only down side for use in xmon is that it uses printk. Depending on circumstances printk may not work when in xmon, but it also may, so add a 'dt' command which dumps the ftrace buffers, and add a note to the help to mentiont that it uses printk. Calling this routine also disables tracing, which is problematic if you return from xmon and expect the system to keep operating normally. So after we do the dump turn tracing back on. Both functions already have nop versions defined for when ftrace is not enabled, so we don't need any extra #ifdefs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-06 09:21:17 +07:00
#include <linux/kernel.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/errno.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-09 00:51:30 +07:00
#include <linux/sched/signal.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/kallsyms.h>
powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:12 +07:00
#include <linux/kmsg_dump.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/cpumask.h>
powerpc: various straight conversions from module.h --> export.h All these files were including module.h just for the basic EXPORT_SYMBOL infrastructure. We can shift them off to the export.h header which is a way smaller footprint and thus realize some compile time gains. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-23 05:24:23 +07:00
#include <linux/export.h>
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
#include <linux/sysrq.h>
[PATCH] powerpc-xmon-build-fix arch/powerpc/xmon/xmon.c:525: error: syntax error before "xmon_irq" arch/powerpc/xmon/xmon.c:526: warning: return type defaults to `int' arch/powerpc/xmon/xmon.c: In function `xmon_irq': arch/powerpc/xmon/xmon.c:532: error: `IRQ_HANDLED' undeclared (first use in this function) arch/powerpc/xmon/xmon.c:532: error: (Each undeclared identifier is reported only once arch/powerpc/xmon/xmon.c:532: error: for each function it appears in.) Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 07:06:50 +07:00
#include <linux/interrupt.h>
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
#include <linux/irq.h>
[POWERPC] Generic BUG for powerpc This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 18:30:41 +07:00
#include <linux/bug.h>
powerpc: Hard disable interrupts in xmon xmon only soft disables interrupts. This seems like a bad idea - we certainly don't want decrementer and PMU exceptions going off when we are debugging something inside xmon. This issue was uncovered when the hard lockup detector went off inside xmon. To ensure we wont get a spurious hard lockup warning, I also call touch_nmi_watchdog() when exiting xmon. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05 11:55:00 +07:00
#include <linux/nmi.h>
powerpc/xmon: use isspace/isxdigit/isalnum from linux/ctype.h isxdigit() macro definition is the same. isalnum() from linux/ctype.h will accept additional latin non-ASCII characters. This is harmless since this macro is used in scanhex() which parses user input. isspace() from linux/ctype.h will accept vertical tab and form feed but not NULL. The use of this macro is modified to accept NULL as well. Additional characters are harmless since this macro is also only used in scanhex(). Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-07-15 18:43:47 +07:00
#include <linux/ctype.h>
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
#include <linux/highmem.h>
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
#include <linux/security.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc: Create asm/debugfs.h and move powerpc_debugfs_root there powerpc_debugfs_root is the dentry representing the root of the "powerpc" directory tree in debugfs. Currently it sits in asm/debug.h, a long with some other things that have "debug" in the name, but are otherwise unrelated. Pull it out into a separate header, which also includes linux/debugfs.h, and convert all the users to include debugfs.h instead of debug.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10 08:04:56 +07:00
#include <asm/debugfs.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/ptrace.h>
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
#include <asm/smp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/string.h>
#include <asm/prom.h>
#include <asm/machdep.h>
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#include <asm/xmon.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
powerpc/xmon: Move empty plpar_set_ciabr() into plpar_wrappers.h Now that plpar_wrappers.h has an #ifdef PSERIES we can move the empty version of plpar_set_ciabr() which xmon wants into there. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-08 09:54:42 +07:00
#include <asm/plpar_wrappers.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/sstep.h>
[POWERPC] Fix xmon IRQ handler for pt_regs removal Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 08:47:07 +07:00
#include <asm/irq_regs.h>
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
#include <asm/spu.h>
#include <asm/spu_priv1.h>
[POWERPC] Make setjmp/longjmp code usable outside of xmon This makes the setjmp/longjmp code used by xmon, generically available to other code. It also removes the requirement for debugger hooks to be only called on 0x300 (data storage) exception. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-18 11:50:30 +07:00
#include <asm/setjmp.h>
powerpc: Prepare xmon_save_regs for use with kdump Today the arch/powerpc/xmon/setjmp.S file contains only the xmon_save_regs function. We want to use it for kdump purposes, so let's move the file into arch/powerpc/kernel/ and give the function a more generic name (ppc_save_regs). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-17 17:08:55 +07:00
#include <asm/reg.h>
Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2012-03-29 00:30:02 +07:00
#include <asm/debug.h>
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
#include <asm/hw_breakpoint.h>
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
#include <asm/xive.h>
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
#include <asm/opal.h>
#include <asm/firmware.h>
powerpc/xmon: Add patch_instruction() support for xmon Move from mwrite() to patch_instruction() for xmon for breakpoint addition and removal. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27 14:48:58 +07:00
#include <asm/code-patching.h>
powerpc/xmon: Add address lookup for percpu symbols Currently, in xmon, there is no obvious way to get an address for a percpu symbol for a particular cpu. Having such an ability would be good for debugging the system when percpu variables got involved. Therefore, this patch introduces a new xmon command "lp" to lookup the address for percpu symbols. Usage of "lp" is similar to "ls", except that we could add a cpu number to choose the variable of which cpu we want to lookup. If no cpu number is given, lookup for current cpu. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 16:20:09 +07:00
#include <asm/sections.h>
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#ifdef CONFIG_PPC64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/hvcall.h>
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#include <asm/paca.h>
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include "nonstdio.h"
[POWERPC] Make xmon disassembly optional While adding spu disassembly support it struck me that we're actually carrying quite a lot of code around, just to do disassembly in the case of a crash. While on large systems it's not an issue, on smaller ones it might be nice to have xmon - but without the weight of the disassembly support. For a Cell build this saves ~230KB (!), and for pSeries ~195KB. We still support the 'di' and 'sdi' commands, however they just dump the instruction in hex. Move the definitions into a header to clean xmon.c just a tiny bit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:45 +07:00
#include "dis-asm.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#ifdef CONFIG_SMP
[POWERPC] Make cpus_in_xmon static and remove extern mess from hvc_console.c This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:17 +07:00
static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static unsigned long xmon_taken = 1;
static int xmon_owner;
static int xmon_gate;
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
#else
#define xmon_owner 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#endif /* CONFIG_SMP */
powerpc/xmon: Fix invocation inside lock region Currently xmon needs to get devtree_lock (through rtas_token()) during its invocation (at crash time). If there is a crash while devtree_lock is being held, then xmon tries to get the lock but spins forever and never get into the interactive debugger, as in the following case: int *ptr = NULL; raw_spin_lock_irqsave(&devtree_lock, flags); *ptr = 0xdeadbeef; This patch avoids calling rtas_token(), thus trying to get the same lock, at crash time. This new mechanism proposes getting the token at initialization time (xmon_init()) and just consuming it at crash time. This would allow xmon to be possible invoked independent of devtree_lock being held or not. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-09 00:12:42 +07:00
#ifdef CONFIG_PPC_PSERIES
static int set_indicator_token = RTAS_UNKNOWN_SERVICE;
#endif
powerpc: Mark some variables in the page fault path __read_mostly Using perf to trace L1 dcache misses and dumping data addresses I found a few variables taking a lot of misses. Since they are almost never written, they should go into the __read_mostly section. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-12 07:50:14 +07:00
static unsigned long in_xmon __read_mostly = 0;
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
static int xmon_on = IS_ENABLED(CONFIG_XMON_DEFAULT);
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
static bool xmon_is_ro = IS_ENABLED(CONFIG_XMON_DEFAULT_RO_MODE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static unsigned long adrs;
static int size = 1;
#define MAX_DUMP (128 * 1024)
static unsigned long ndump = 64;
static unsigned long nidump = 16;
static unsigned long ncsum = 4096;
static int termch;
static char tmpstr[128];
powerpc/xmon: Disable tracing when entering xmon If tracing is enabled and you get into xmon, the tracing buffer continues to be updated, causing possible loss of data and unnecessary tracing information coming from xmon functions. This patch simple disables tracing when entering xmon, and re-enables it if the kernel is resumed (with 'x'). Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:06 +07:00
static int tracing_enabled;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static long bus_error_jmp[JMP_BUF_LEN];
static int catch_memory_errors;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
static int catch_spr_faults;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static long *xmon_fault_jmp[NR_CPUS];
/* Breakpoint stuff */
struct bpt {
unsigned long address;
unsigned int instr[2];
atomic_t ref_count;
int enabled;
unsigned long pad;
};
/* Bits in bpt.enabled */
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
#define BP_CIABR 1
#define BP_TRAP 2
#define BP_DABR 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#define NBPTS 256
static struct bpt bpts[NBPTS];
static struct bpt dabr;
static struct bpt *iabr;
static unsigned bpinstr = 0x7fe00008; /* trap */
#define BP_NUM(bp) ((bp) - bpts + 1)
/* Prototypes */
static int cmds(struct pt_regs *);
static int mread(unsigned long, void *, int);
static int mwrite(unsigned long, void *, int);
static int handle_fault(struct pt_regs *);
static void byterev(unsigned char *, int);
static void memex(void);
static int bsesc(void);
static void dump(void);
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
static void show_pte(unsigned long);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void prdump(unsigned long, long);
static int ppc_inst_dump(unsigned long, long, int);
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
static void dump_log_buf(void);
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
#ifdef CONFIG_PPC_POWERNV
static void dump_opal_msglog(void);
#else
static inline void dump_opal_msglog(void)
{
printf("Machine is not running OPAL firmware.\n");
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void backtrace(struct pt_regs *);
static void excprint(struct pt_regs *);
static void prregs(struct pt_regs *);
static void memops(int);
static void memlocate(void);
static void memzcan(void);
static void memdiffs(unsigned char *, unsigned char *, unsigned, unsigned);
int skipbl(void);
int scanhex(unsigned long *valp);
static void scannl(void);
static int hexdigit(int);
void getstring(char *, int);
static void flush_input(void);
static int inchar(void);
static void take_input(char *);
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
static int read_spr(int, unsigned long *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void write_spr(int, unsigned long);
static void super_regs(void);
static void remove_bpts(void);
static void insert_bpts(void);
static void remove_cpu_bpts(void);
static void insert_cpu_bpts(void);
static struct bpt *at_breakpoint(unsigned long pc);
static struct bpt *in_breakpoint_table(unsigned long pc, unsigned long *offp);
static int do_step(struct pt_regs *);
static void bpt_cmds(void);
static void cacheflush(void);
static int cpu_cmd(void);
static void csum(void);
static void bootcmds(void);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
static void proccall(void);
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
static void show_tasks(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
void dump_segments(void);
static void symbol_lookup(void);
[POWERPC] print backtrace when entering xmon xmon does not print a backtrace per default. This is bad on systems with USB keyboard, the most needed info about the crash is lost. print a backtrace during the very first xmon entry. Booting with xmon=nobt disables the autobacktrace functionality. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-08 21:29:21 +07:00
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void xmon_print_symbol(unsigned long address, const char *mid,
const char *after);
static const char *getvecname(unsigned long vec);
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
static int do_spu_cmd(void);
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
#ifdef CONFIG_44x
static void dump_tlb_44x(void);
#endif
powerpc/book3e: Add TLB dump in xmon for Book3E Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09 12:34:50 +07:00
#ifdef CONFIG_PPC_BOOK3E
static void dump_tlb_book3e(void);
#endif
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
static void clear_all_bpt(void);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#ifdef CONFIG_PPC64
#define REG "%.16lx"
#else
#define REG "%.8lx"
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc: Fix xmon disassembler for little-endian This patch fixes the disassembler of the powerpc kernel debugger xmon, for little-endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-02 16:10:12 +07:00
#ifdef __LITTLE_ENDIAN__
#define GETWORD(v) (((v)[3] << 24) + ((v)[2] << 16) + ((v)[1] << 8) + (v)[0])
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#define GETWORD(v) (((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
powerpc: Fix xmon disassembler for little-endian This patch fixes the disassembler of the powerpc kernel debugger xmon, for little-endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-02 16:10:12 +07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
static const char *xmon_ro_msg = "Operation disabled: xmon in read-only mode\n";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static char *help_string = "\
Commands:\n\
b show breakpoints\n\
bd set data breakpoint\n\
bi set instruction breakpoint\n\
bc clear breakpoint\n"
#ifdef CONFIG_SMP
"\
c print cpus stopped in xmon\n\
c# try to switch to cpu number h (in hex)\n"
#endif
"\
C checksum\n\
d dump bytes\n\
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
d1 dump 1 byte values\n\
d2 dump 2 byte values\n\
d4 dump 4 byte values\n\
d8 dump 8 byte values\n\
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
di dump instructions\n\
df dump float values\n\
dd dump double values\n\
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
dl dump the kernel log buffer\n"
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
#ifdef CONFIG_PPC_POWERNV
"\
do dump the OPAL message log\n"
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
#ifdef CONFIG_PPC64
"\
dp[#] dump paca for current cpu, or cpu #\n\
dpa dump paca for all possible cpus\n"
#endif
"\
[PATCH] powerpc: add a raw dump command to xmon Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-09 02:40:28 +07:00
dr dump stream of raw bytes\n\
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
dv dump virtual address translation \n\
powerpc/xmon: Add 'dt' command to dump trace buffers There is a nice interface for asking ftrace to dump all its tracing buffers. The only down side for use in xmon is that it uses printk. Depending on circumstances printk may not work when in xmon, but it also may, so add a 'dt' command which dumps the ftrace buffers, and add a note to the help to mentiont that it uses printk. Calling this routine also disables tracing, which is problematic if you return from xmon and expect the system to keep operating normally. So after we do the dump turn tracing back on. Both functions already have nop versions defined for when ftrace is not enabled, so we don't need any extra #ifdefs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-06 09:21:17 +07:00
dt dump the tracing buffers (uses printk)\n\
powerpc/xmon: Dump ftrace buffers for the current CPU only Current xmon 'dt' command dumps the tracing buffer for all the CPUs, which makes it very hard to read due to the fact that most of powerpc machines currently have many CPUs. Other than that, the CPU lines are interleaved in the ftrace log. This new option just dumps the ftrace buffer for the current CPU. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:05 +07:00
dtc dump the tracing buffers for current CPU (uses printk)\n\
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
"
#ifdef CONFIG_PPC_POWERNV
" dx# dump xive on CPU #\n\
dxi# dump xive irq state #\n\
dxa dump xive on all CPUs\n"
#endif
" e print exception information\n\
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
f flush cache\n\
la lookup symbol+offset of specified address\n\
ls lookup address of specified symbol\n\
powerpc/xmon: Add address lookup for percpu symbols Currently, in xmon, there is no obvious way to get an address for a percpu symbol for a particular cpu. Having such an ability would be good for debugging the system when percpu variables got involved. Therefore, this patch introduces a new xmon command "lp" to lookup the address for percpu symbols. Usage of "lp" is similar to "ls", except that we could add a cpu number to choose the variable of which cpu we want to lookup. If no cpu number is given, lookup for current cpu. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 16:20:09 +07:00
lp s [#] lookup address of percpu symbol s for current cpu, or cpu #\n\
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
m examine/change memory\n\
mm move a block of memory\n\
ms set a block of memory\n\
md compare two blocks of memory\n\
ml locate a block of memory\n\
mz zero a block of memory\n\
mi show information about memory allocation\n\
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
p call a procedure\n\
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
P list processes/tasks\n\
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
r print registers\n\
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
s single step\n"
[POWERPC] cell: fix building without spufs It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-28 01:18:55 +07:00
#ifdef CONFIG_SPU_BASE
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
" ss stop execution on all spus\n\
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
sr restore execution on stopped spus\n\
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
sf # dump spu fields for spu # (in hex)\n\
[POWERPC] Add missing newline in xmon help output My patch to add spu disassembly (af89fb8041562508895c8f3ba04790d7c2f4338c) removed a newline from the xmon help that it shouldn't have, put it back. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-26 16:14:06 +07:00
sd # dump spu local store for spu # (in hex)\n\
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
sdi # disassemble spu local store for spu # (in hex)\n"
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
#endif
" S print special registers\n\
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
Sa print all SPRs\n\
Sr # read SPR #\n\
Sw #v write v to SPR #\n\
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
t print backtrace\n\
x exit monitor and recover\n\
powerpc/xmon: fix typo in usage message Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-27 07:29:44 +07:00
X exit monitor and don't recover\n"
powerpc/xmon: Fix the 'u' command description The 'u' command will print the TLB on book3e parts and the SLB on Book3s parts, but the help system doesn't say that correctly. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-29 18:25:10 +07:00
#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
" u dump segment table or SLB\n"
powerpc: change CONFIG_PPC_STD_MMU_32 to CONFIG_PPC_BOOK3S_32 Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config PPC_STD_MMU def_bool y depends on PPC_BOOK3S config PPC_STD_MMU_32 def_bool y depends on PPC_STD_MMU && PPC32 PPC_STD_MMU_32 is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_PPC_STD_MMU_32 in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-17 17:25:02 +07:00
#elif defined(CONFIG_PPC_BOOK3S_32)
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
" u dump segment registers\n"
powerpc/xmon: Fix the 'u' command description The 'u' command will print the TLB on book3e parts and the SLB on Book3s parts, but the help system doesn't say that correctly. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-29 18:25:10 +07:00
#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
" u dump TLB\n"
#endif
powerpc/xmon: Add option to show uptime information It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-18 21:16:58 +07:00
" U show uptime information\n"
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
" ? help\n"
powerpc/xmon: Paginate kernel log buffer display The kernel log buffer is often much longer than the size of a terminal so paginate it's output. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:24 +07:00
" # n limit output to n lines per page (for dp, dpa, dl)\n"
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
" zr reboot\n"
" zh halt\n"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
;
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
#ifdef CONFIG_SECURITY
static bool xmon_is_locked_down(void)
{
static bool lockdown;
if (!lockdown) {
lockdown = !!security_locked_down(LOCKDOWN_XMON_RW);
if (lockdown) {
printf("xmon: Disabled due to kernel lockdown\n");
xmon_is_ro = true;
}
}
if (!xmon_is_ro) {
xmon_is_ro = !!security_locked_down(LOCKDOWN_XMON_WR);
if (xmon_is_ro)
printf("xmon: Read-only due to kernel lockdown\n");
}
return lockdown;
}
#else /* CONFIG_SECURITY */
static inline bool xmon_is_locked_down(void)
{
return false;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static struct pt_regs *xmon_regs;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
static inline void sync(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
asm volatile("sync; isync");
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
static inline void store_inst(void *p)
{
asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
}
static inline void cflush(void *p)
{
asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
}
static inline void cinval(void *p)
{
asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
/**
* write_ciabr() - write the CIABR SPR
* @ciabr: The value to write.
*
* This function writes a value to the CIARB register either directly
* through mtspr instruction if the kernel is in HV privilege mode or
* call a hypervisor function to achieve the same in case the kernel
* is in supervisor privilege mode.
*/
static void write_ciabr(unsigned long ciabr)
{
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
return;
if (cpu_has_feature(CPU_FTR_HVMODE)) {
mtspr(SPRN_CIABR, ciabr);
return;
}
powerpc: Rename plapr routines to plpar Back in 2013 we added some hypercall wrappers which misspelled "plpar" (P-series Logical PARtition) as "plapr". Visually they're hard to distinguish and it almost doesn't matter, but it is confusing when grepping to miss some calls because of the typo. They've also started spreading, so before they take over let's fix them all to be "plpar". Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-08 09:54:41 +07:00
plpar_set_ciabr(ciabr);
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
}
/**
* set_ciabr() - set the CIABR
* @addr: The value to set.
*
* This function sets the correct privilege value into the the HW
* breakpoint address before writing it up in the CIABR register.
*/
static void set_ciabr(unsigned long addr)
{
addr &= ~CIABR_PRIV;
if (cpu_has_feature(CPU_FTR_HVMODE))
addr |= CIABR_PRIV_HYPER;
else
addr |= CIABR_PRIV_SUPER;
write_ciabr(addr);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* Disable surveillance (the service processor watchdog function)
* while we are in xmon.
* XXX we should re-enable it when we leave. :)
*/
#define SURVEILLANCE_TOKEN 9000
static inline void disable_surveillance(void)
{
#ifdef CONFIG_PPC_PSERIES
/* Since this can't be a module, args should end up below 4GB. */
static struct rtas_args args;
/*
* At this point we have got all the cpus we can into
* xmon, so there is hopefully no other cpu calling RTAS
* at the moment, even though we don't take rtas.lock.
* If we did try to take rtas.lock there would be a
* real possibility of deadlock.
*/
powerpc/xmon: Fix invocation inside lock region Currently xmon needs to get devtree_lock (through rtas_token()) during its invocation (at crash time). If there is a crash while devtree_lock is being held, then xmon tries to get the lock but spins forever and never get into the interactive debugger, as in the following case: int *ptr = NULL; raw_spin_lock_irqsave(&devtree_lock, flags); *ptr = 0xdeadbeef; This patch avoids calling rtas_token(), thus trying to get the same lock, at crash time. This new mechanism proposes getting the token at initialization time (xmon_init()) and just consuming it at crash time. This would allow xmon to be possible invoked independent of devtree_lock being held or not. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-09 00:12:42 +07:00
if (set_indicator_token == RTAS_UNKNOWN_SERVICE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return;
powerpc/xmon: Use rtas_call_unlocked() in xmon Avoid open coding the logic by using rtas_call_unlocked(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-24 18:26:09 +07:00
powerpc/xmon: Fix invocation inside lock region Currently xmon needs to get devtree_lock (through rtas_token()) during its invocation (at crash time). If there is a crash while devtree_lock is being held, then xmon tries to get the lock but spins forever and never get into the interactive debugger, as in the following case: int *ptr = NULL; raw_spin_lock_irqsave(&devtree_lock, flags); *ptr = 0xdeadbeef; This patch avoids calling rtas_token(), thus trying to get the same lock, at crash time. This new mechanism proposes getting the token at initialization time (xmon_init()) and just consuming it at crash time. This would allow xmon to be possible invoked independent of devtree_lock being held or not. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-09 00:12:42 +07:00
rtas_call_unlocked(&args, set_indicator_token, 3, 1, NULL,
SURVEILLANCE_TOKEN, 0, 0);
powerpc/xmon: Use rtas_call_unlocked() in xmon Avoid open coding the logic by using rtas_call_unlocked(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-24 18:26:09 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#endif /* CONFIG_PPC_PSERIES */
}
#ifdef CONFIG_SMP
static int xmon_speaker;
static void get_output_lock(void)
{
int me = smp_processor_id() + 0x100;
int last_speaker = 0, prev;
long timeout;
if (xmon_speaker == me)
return;
powerpc/xmon: Don't loop forever in get_output_lock() If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also skip the while loop because xmon_speaker != last_speaker (0) - meaning we skip the second cmpxchg() also. Following that code path the compiler sees no memory barriers and so is within its rights to never reload xmon_speaker. The end result is we loop forever. This manifests as all cpus being in xmon ('c' command), but they refuse to take control when you switch to them ('c x' for cpu # x). I have seen this deadlock in practice and also checked the generated code to confirm this is what's happening. The simplest fix is just to always try the cmpxchg(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:04 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
for (;;) {
powerpc/xmon: Don't loop forever in get_output_lock() If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also skip the while loop because xmon_speaker != last_speaker (0) - meaning we skip the second cmpxchg() also. Following that code path the compiler sees no memory barriers and so is within its rights to never reload xmon_speaker. The end result is we loop forever. This manifests as all cpus being in xmon ('c' command), but they refuse to take control when you switch to them ('c x' for cpu # x). I have seen this deadlock in practice and also checked the generated code to confirm this is what's happening. The simplest fix is just to always try the cmpxchg(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:04 +07:00
last_speaker = cmpxchg(&xmon_speaker, 0, me);
if (last_speaker == 0)
return;
powerpc/xmon: Fix timeout loop in get_output_lock() As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:05 +07:00
/*
* Wait a full second for the lock, we might be on a slow
* console, but check every 100us.
*/
timeout = 10000;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
while (xmon_speaker == last_speaker) {
powerpc/xmon: Fix timeout loop in get_output_lock() As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:05 +07:00
if (--timeout > 0) {
udelay(100);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
powerpc/xmon: Fix timeout loop in get_output_lock() As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:05 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* hostile takeover */
prev = cmpxchg(&xmon_speaker, last_speaker, me);
if (prev == last_speaker)
return;
break;
}
}
}
static void release_output_lock(void)
{
xmon_speaker = 0;
}
[POWERPC] Make cpus_in_xmon static and remove extern mess from hvc_console.c This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:17 +07:00
int cpus_are_in_xmon(void)
{
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
return !cpumask_empty(&cpus_in_xmon);
[POWERPC] Make cpus_in_xmon static and remove extern mess from hvc_console.c This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:17 +07:00
}
powerpc/xmon: Wait for secondaries before IPI'ing on system reset An externally triggered system reset (e.g., via QEMU nmi command, or pseries reset button) can cause system reset interrupts on all CPUs. In case this causes xmon to be entered, it is undesirable for the primary (first) CPU into xmon to trigger an NMI IPI to others, because this may cause a nested system reset interrupt. So spin for a time waiting for secondaries to join xmon before performing the NMI IPI, similarly to what the crash dump code does. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Only do it when we come in from system reset, not via sysrq etc.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-20 01:30:11 +07:00
static bool wait_for_other_cpus(int ncpus)
{
unsigned long timeout;
/* We wait for 2s, which is a metric "little while" */
for (timeout = 20000; timeout != 0; --timeout) {
if (cpumask_weight(&cpus_in_xmon) >= ncpus)
return true;
udelay(100);
barrier();
}
return false;
}
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
#else /* CONFIG_SMP */
static inline void get_output_lock(void) {}
static inline void release_output_lock(void) {}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx The xmon code relies on MSR_RI being non-zero to indicate that an exception is recoverable. If it is not, it prints a warning message. However, the PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for every xmon event. This introduces an unrecoverable_excp function to determine if an exception is recoverable or not. This gets rid of the erroneous warnings on 4xx. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23 10:51:04 +07:00
static inline int unrecoverable_excp(struct pt_regs *regs)
{
powerpc/xmon: Fix #if typo for systems without MSR[RI] Sorry, there was a typo in the #if signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-29 19:05:28 +07:00
#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E)
powerpc: Fix xmon for systems without MSR[RI] Based on patch by David Gibson <dwg@au1.ibm.com> xmon has a longstanding bug on systems which are SMP-capable but lack the MSR[RI] bit. In these cases, xmon invoked by IPI on secondary CPUs will not properly keep quiet, but will print stuff, thereby garbling the primary xmon's output. This patch fixes it, by ignoring the RI bit if the processor does not support it. There's already a version of this for 4xx upstream, which we'll need to extend to other RI-lacking CPUs at some point. For now this adds Book3e processors to the mix. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-23 12:40:46 +07:00
/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx The xmon code relies on MSR_RI being non-zero to indicate that an exception is recoverable. If it is not, it prints a warning message. However, the PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for every xmon event. This introduces an unrecoverable_excp function to determine if an exception is recoverable or not. This gets rid of the erroneous warnings on 4xx. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23 10:51:04 +07:00
return 0;
#else
return ((regs->msr & MSR_RI) == 0);
#endif
}
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_core(struct pt_regs *regs, int fromipi)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
int cmd = 0;
struct bpt *bp;
long recurse_jmp[JMP_BUF_LEN];
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
bool locked_down;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned long offset;
[POWERPC] Fix WARN_ON when entering xmon Whenever we enter xmon we get a WARN_ON out of the rtas code since it thinks interrupts are still on: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd000000000080008 cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00] pc: d000000000080008: .doit+0x8/0x40 [oopser] lr: c000000000077704: .sys_init_module+0x1664/0x1824 sp: c0000000075dbc80 msr: 9000000000009032 dar: 0 dsisr: 42000000 current = 0xc000000003fa64b0 paca = 0xc000000000694280 pid = 2260, comm = insmod ------------[ cut here ]------------ Badness at arch/powerpc/kernel/entry_64.S:651 Call Trace: [C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable) [C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8 [C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584 [C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100 Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-20 21:48:34 +07:00
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#ifdef CONFIG_SMP
int cpu;
int secondary;
#endif
[POWERPC] Fix WARN_ON when entering xmon Whenever we enter xmon we get a WARN_ON out of the rtas code since it thinks interrupts are still on: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd000000000080008 cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00] pc: d000000000080008: .doit+0x8/0x40 [oopser] lr: c000000000077704: .sys_init_module+0x1664/0x1824 sp: c0000000075dbc80 msr: 9000000000009032 dar: 0 dsisr: 42000000 current = 0xc000000003fa64b0 paca = 0xc000000000694280 pid = 2260, comm = insmod ------------[ cut here ]------------ Badness at arch/powerpc/kernel/entry_64.S:651 Call Trace: [C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable) [C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8 [C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584 [C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100 Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-20 21:48:34 +07:00
local_irq_save(flags);
powerpc: Hard disable interrupts in xmon xmon only soft disables interrupts. This seems like a bad idea - we certainly don't want decrementer and PMU exceptions going off when we are debugging something inside xmon. This issue was uncovered when the hard lockup detector went off inside xmon. To ensure we wont get a spurious hard lockup warning, I also call touch_nmi_watchdog() when exiting xmon. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05 11:55:00 +07:00
hard_irq_disable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
locked_down = xmon_is_locked_down();
powerpc/xmon: Fix disabling tracing while in xmon Commit ed49f7fd6438d ("powerpc/xmon: Disable tracing when entering xmon") added code to disable recording trace entries while in xmon. The commit introduced a variable 'tracing_enabled' to record if tracing was enabled on xmon entry, and used this to conditionally enable tracing during exit from xmon. However, we are not checking the value of 'fromipi' variable in xmon_core() when setting 'tracing_enabled'. Due to this, when secondary cpus enter xmon, they will see tracing as being disabled already and tracing won't be re-enabled on exit. Fix the same. Fixes: ed49f7fd6438d ("powerpc/xmon: Disable tracing when entering xmon") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-27 16:59:40 +07:00
if (!fromipi) {
tracing_enabled = tracing_is_on();
tracing_off();
}
powerpc/xmon: Disable tracing when entering xmon If tracing is enabled and you get into xmon, the tracing buffer continues to be updated, causing possible loss of data and unnecessary tracing information coming from xmon functions. This patch simple disables tracing when entering xmon, and re-enables it if the kernel is resumed (with 'x'). Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:06 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL) {
regs->nip = bp->address + offset;
atomic_dec(&bp->ref_count);
}
remove_cpu_bpts();
#ifdef CONFIG_SMP
cpu = smp_processor_id();
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
/*
* We catch SPR read/write faults here because the 0x700, 0xf60
* etc. handlers don't call debugger_fault_handler().
*/
if (catch_spr_faults)
longjmp(bus_error_jmp, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
get_output_lock();
excprint(regs);
printf("cpu 0x%x: Exception %lx %s in xmon, "
"returning to main loop\n",
cpu, regs->trap, getvecname(TRAP(regs)));
[PATCH] Xmon bug fix for soft-reset For soft reset during system hang, got an error "CPU did not take control" for some CPUs even though they responded to soft-reset (called SystemReset, die and called debugger - xmon). First these CPUs entered into xmon by IPI callback and then got a soft-reset exception and re-entered into xmon again. The first CPU which re-entered into xmon got the output lock and made into xmon successfully without unlocking. Hence, the next CPU(s) which re-entered into xmon try to acquire a lock (get_output_lock). Therefore, we can not view state of those CPU(s). [This is a simple, very low risk, obvious fix for an obvious bug, and should go into 2.6.13. -- paulus] Signed-off-by: Haren Myneni <hbabu@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03 12:08:18 +07:00
release_output_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
longjmp(xmon_fault_jmp[cpu], 1);
}
if (setjmp(recurse_jmp) != 0) {
if (!in_xmon || !xmon_gate) {
[PATCH] Xmon bug fix for soft-reset For soft reset during system hang, got an error "CPU did not take control" for some CPUs even though they responded to soft-reset (called SystemReset, die and called debugger - xmon). First these CPUs entered into xmon by IPI callback and then got a soft-reset exception and re-entered into xmon again. The first CPU which re-entered into xmon got the output lock and made into xmon successfully without unlocking. Hence, the next CPU(s) which re-entered into xmon try to acquire a lock (get_output_lock). Therefore, we can not view state of those CPU(s). [This is a simple, very low risk, obvious fix for an obvious bug, and should go into 2.6.13. -- paulus] Signed-off-by: Haren Myneni <hbabu@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03 12:08:18 +07:00
get_output_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("xmon: WARNING: bad recursive fault "
"on cpu 0x%x\n", cpu);
[PATCH] Xmon bug fix for soft-reset For soft reset during system hang, got an error "CPU did not take control" for some CPUs even though they responded to soft-reset (called SystemReset, die and called debugger - xmon). First these CPUs entered into xmon by IPI callback and then got a soft-reset exception and re-entered into xmon again. The first CPU which re-entered into xmon got the output lock and made into xmon successfully without unlocking. Hence, the next CPU(s) which re-entered into xmon try to acquire a lock (get_output_lock). Therefore, we can not view state of those CPU(s). [This is a simple, very low risk, obvious fix for an obvious bug, and should go into 2.6.13. -- paulus] Signed-off-by: Haren Myneni <hbabu@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03 12:08:18 +07:00
release_output_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto waiting;
}
secondary = !(xmon_taken && cpu == xmon_owner);
goto cmdloop;
}
xmon_fault_jmp[cpu] = recurse_jmp;
bp = NULL;
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bp = at_breakpoint(regs->nip);
powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx The xmon code relies on MSR_RI being non-zero to indicate that an exception is recoverable. If it is not, it prints a warning message. However, the PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for every xmon event. This introduces an unrecoverable_excp function to determine if an exception is recoverable or not. This gets rid of the erroneous warnings on 4xx. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23 10:51:04 +07:00
if (bp || unrecoverable_excp(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
fromipi = 0;
if (!fromipi) {
get_output_lock();
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!locked_down)
excprint(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (bp) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("cpu 0x%x stopped at breakpoint 0x%tx (",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
cpu, BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx The xmon code relies on MSR_RI being non-zero to indicate that an exception is recoverable. If it is not, it prints a warning message. However, the PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for every xmon event. This introduces an unrecoverable_excp function to determine if an exception is recoverable or not. This gets rid of the erroneous warnings on 4xx. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23 10:51:04 +07:00
if (unrecoverable_excp(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("WARNING: exception is not recoverable, "
"can't continue\n");
release_output_lock();
}
powerpc/xmon: Don't signal we've entered until we're finished printing Currently we set our cpu's bit in cpus_in_xmon, and then we take the output lock and print the exception information. This can race with the master cpu entering the command loop and printing the backtrace. The result is that the backtrace gets garbled with another cpu's exception print out. Fix it by delaying the set of cpus_in_xmon until we are finished printing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-23 19:46:06 +07:00
cpumask_set_cpu(cpu, &cpus_in_xmon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
waiting:
secondary = 1;
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_begin();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
while (secondary && !xmon_gate) {
if (in_xmon == 0) {
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
if (fromipi) {
spin_end();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto leave;
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
secondary = test_and_set_bit(0, &in_xmon);
}
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_cpu_relax();
touch_nmi_watchdog();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_end();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (!secondary && !xmon_gate) {
/* we are the first cpu to come in */
/* interrupt other cpu(s) */
int ncpus = num_online_cpus();
xmon_owner = cpu;
mb();
if (ncpus > 1) {
powerpc/xmon: Wait for secondaries before IPI'ing on system reset An externally triggered system reset (e.g., via QEMU nmi command, or pseries reset button) can cause system reset interrupts on all CPUs. In case this causes xmon to be entered, it is undesirable for the primary (first) CPU into xmon to trigger an NMI IPI to others, because this may cause a nested system reset interrupt. So spin for a time waiting for secondaries to join xmon before performing the NMI IPI, similarly to what the crash dump code does. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Only do it when we come in from system reset, not via sysrq etc.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-20 01:30:11 +07:00
/*
* A system reset (trap == 0x100) can be triggered on
* all CPUs, so when we come in via 0x100 try waiting
* for the other CPUs to come in before we send the
* debugger break (IPI). This is similar to
* crash_kexec_secondary().
*/
if (TRAP(regs) != 0x100 || !wait_for_other_cpus(ncpus))
smp_send_debugger_break();
wait_for_other_cpus(ncpus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
remove_bpts();
disable_surveillance();
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!locked_down) {
/* for breakpoint or single step, print curr insn */
if (bp || TRAP(regs) == 0xd00)
ppc_inst_dump(regs->nip, 1, 0);
printf("enter ? for help\n");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mb();
xmon_gate = 1;
barrier();
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
touch_nmi_watchdog();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
cmdloop:
while (in_xmon) {
if (secondary) {
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_begin();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (cpu == xmon_owner) {
if (!test_and_set_bit(0, &xmon_taken)) {
secondary = 0;
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_end();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
}
/* missed it */
while (cpu == xmon_owner)
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_cpu_relax();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Avoid tripping SMP hardlockup watchdog The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-29 10:29:40 +07:00
spin_cpu_relax();
touch_nmi_watchdog();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
} else {
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!locked_down)
cmd = cmds(regs);
if (locked_down || cmd != 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* exiting xmon */
insert_bpts();
xmon_gate = 0;
wmb();
in_xmon = 0;
break;
}
/* have switched to some other cpu */
secondary = 1;
}
}
leave:
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
cpumask_clear_cpu(cpu, &cpus_in_xmon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_fault_jmp[cpu] = NULL;
#else
/* UP is simple... */
if (in_xmon) {
printf("Exception %lx %s in xmon, returning to main loop\n",
regs->trap, getvecname(TRAP(regs)));
longjmp(xmon_fault_jmp[0], 1);
}
if (setjmp(recurse_jmp) == 0) {
xmon_fault_jmp[0] = recurse_jmp;
in_xmon = 1;
excprint(regs);
bp = at_breakpoint(regs->nip);
if (bp) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("Stopped at breakpoint %tx (", BP_NUM(bp));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(regs->nip, " ", ")\n");
}
powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx The xmon code relies on MSR_RI being non-zero to indicate that an exception is recoverable. If it is not, it prints a warning message. However, the PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for every xmon event. This introduces an unrecoverable_excp function to determine if an exception is recoverable or not. This gets rid of the erroneous warnings on 4xx. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23 10:51:04 +07:00
if (unrecoverable_excp(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("WARNING: exception is not recoverable, "
"can't continue\n");
remove_bpts();
disable_surveillance();
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!locked_down) {
/* for breakpoint or single step, print current insn */
if (bp || TRAP(regs) == 0xd00)
ppc_inst_dump(regs->nip, 1, 0);
printf("enter ? for help\n");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!locked_down)
cmd = cmds(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
insert_bpts();
in_xmon = 0;
#endif
powerpc/booke: Fix xmon single step on PowerPC Book-E Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single stepping on 4xx boards. The functionality was lost when arch/ppc was removed. This patch restores single step support for 44x boards, and Book-E in general. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-05 11:46:05 +07:00
#ifdef CONFIG_BOOKE
if (regs->msr & MSR_DE) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
regs->nip = (unsigned long) &bp->instr[0];
atomic_inc(&bp->ref_count);
}
}
#else
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
int stepped = emulate_step(regs, bp->instr[0]);
if (stepped == 0) {
regs->nip = (unsigned long) &bp->instr[0];
atomic_inc(&bp->ref_count);
} else if (stepped < 0) {
printf("Couldn't single-step %s instruction\n",
(IS_RFID(bp->instr[0])? "rfid": "mtmsrd"));
}
}
}
powerpc/booke: Fix xmon single step on PowerPC Book-E Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single stepping on 4xx boards. The functionality was lost when arch/ppc was removed. This patch restores single step support for 44x boards, and Book-E in general. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-05 11:46:05 +07:00
#endif
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (locked_down)
clear_all_bpt();
else
insert_cpu_bpts();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc: Hard disable interrupts in xmon xmon only soft disables interrupts. This seems like a bad idea - we certainly don't want decrementer and PMU exceptions going off when we are debugging something inside xmon. This issue was uncovered when the hard lockup detector went off inside xmon. To ensure we wont get a spurious hard lockup warning, I also call touch_nmi_watchdog() when exiting xmon. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05 11:55:00 +07:00
touch_nmi_watchdog();
[POWERPC] Fix WARN_ON when entering xmon Whenever we enter xmon we get a WARN_ON out of the rtas code since it thinks interrupts are still on: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd000000000080008 cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00] pc: d000000000080008: .doit+0x8/0x40 [oopser] lr: c000000000077704: .sys_init_module+0x1664/0x1824 sp: c0000000075dbc80 msr: 9000000000009032 dar: 0 dsisr: 42000000 current = 0xc000000003fa64b0 paca = 0xc000000000694280 pid = 2260, comm = insmod ------------[ cut here ]------------ Badness at arch/powerpc/kernel/entry_64.S:651 Call Trace: [C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable) [C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8 [C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584 [C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100 Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-20 21:48:34 +07:00
local_irq_restore(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[POWERPC] Don't try to just continue if xmon has no input device Currently, if xmon has no input device (as is generally the case on G5 powermacs), and we drop into xmon as a result of a fatal exception, it will return 1, which die() interprets as "continue without causing an oops". This fixes it by making xmon() return 0 in the case where it has no input device. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 18:32:49 +07:00
return cmd != 'X' && cmd != EOF;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
int xmon(struct pt_regs *excp)
{
struct pt_regs regs;
if (excp == NULL) {
powerpc: Prepare xmon_save_regs for use with kdump Today the arch/powerpc/xmon/setjmp.S file contains only the xmon_save_regs function. We want to use it for kdump purposes, so let's move the file into arch/powerpc/kernel/ and give the function a more generic name (ppc_save_regs). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-17 17:08:55 +07:00
ppc_save_regs(&regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
excp = &regs;
}
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return xmon_core(excp, 0);
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
EXPORT_SYMBOL(xmon);
[POWERPC] Fix xmon IRQ handler for pt_regs removal Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 08:47:07 +07:00
irqreturn_t xmon_irq(int irq, void *d)
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
{
unsigned long flags;
local_irq_save(flags);
printf("Keyboard interrupt\n");
[POWERPC] Fix xmon IRQ handler for pt_regs removal Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 08:47:07 +07:00
xmon(get_irq_regs());
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
local_irq_restore(flags);
return IRQ_HANDLED;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_bpt(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct bpt *bp;
unsigned long offset;
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
/* Are we at the trap at bp->instr[1] for some bp? */
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL && offset == 4) {
regs->nip = bp->address + 4;
atomic_dec(&bp->ref_count);
return 1;
}
/* Are we at a breakpoint? */
bp = at_breakpoint(regs->nip);
if (!bp)
return 0;
xmon_core(regs, 0);
return 1;
}
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_sstep(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
if (user_mode(regs))
return 0;
xmon_core(regs, 0);
return 1;
}
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
static int xmon_break_match(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
[PATCH] ppc64: Add ptrace data breakpoint support Add hardware data breakpoint support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-10 13:01:11 +07:00
if (dabr.enabled == 0)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_core(regs, 0);
return 1;
}
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_iabr_match(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
if (iabr == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
xmon_core(regs, 0);
return 1;
}
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_ipi(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
#ifdef CONFIG_SMP
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
if (in_xmon && !cpumask_test_cpu(smp_processor_id(), &cpus_in_xmon))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_core(regs, 1);
#endif
return 0;
}
[PATCH] powerpc: xmon namespace cleanups These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 07:00:05 +07:00
static int xmon_fault_handler(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct bpt *bp;
unsigned long offset;
if (in_xmon && catch_memory_errors)
handle_fault(regs); /* doesn't return */
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL) {
regs->nip = bp->address + offset;
atomic_dec(&bp->ref_count);
}
}
return 0;
}
powerpc/xmon: Also setup debugger hooks when single-stepping When single-stepping kernel code from xmon without a debug hook enabled the kernel crashes. This can happen when kernel starts with xmon on crash disabled but xmon is entered using sysrq. Call force_enable_xmon when single-stepping in xmon to install the xmon debug hooks. Fixes: e1368d0c9edb ("powerpc/xmon: Setup debugger hooks when first break-point is set") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-24 01:00:54 +07:00
/* Force enable xmon if not already enabled */
static inline void force_enable_xmon(void)
{
/* Enable xmon hooks if needed */
if (!xmon_on) {
printf("xmon: Enabling debugger hooks\n");
xmon_on = 1;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static struct bpt *at_breakpoint(unsigned long pc)
{
int i;
struct bpt *bp;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp)
if (bp->enabled && pc == bp->address)
return bp;
return NULL;
}
static struct bpt *in_breakpoint_table(unsigned long nip, unsigned long *offp)
{
unsigned long off;
off = nip - (unsigned long) bpts;
if (off >= sizeof(bpts))
return NULL;
off %= sizeof(struct bpt);
if (off != offsetof(struct bpt, instr[0])
&& off != offsetof(struct bpt, instr[1]))
return NULL;
*offp = off - offsetof(struct bpt, instr[0]);
return (struct bpt *) (nip - off);
}
static struct bpt *new_breakpoint(unsigned long a)
{
struct bpt *bp;
a &= ~3UL;
bp = at_breakpoint(a);
if (bp)
return bp;
for (bp = bpts; bp < &bpts[NBPTS]; ++bp) {
if (!bp->enabled && atomic_read(&bp->ref_count) == 0) {
bp->address = a;
bp->instr[1] = bpinstr;
store_inst(&bp->instr[1]);
return bp;
}
}
printf("Sorry, no free breakpoints. Please clear one first.\n");
return NULL;
}
static void insert_bpts(void)
{
int i;
struct bpt *bp;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
if ((bp->enabled & (BP_TRAP|BP_CIABR)) == 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
if (mread(bp->address, &bp->instr[0], 4) != 4) {
printf("Couldn't read instruction at %lx, "
"disabling breakpoint there\n", bp->address);
bp->enabled = 0;
continue;
}
if (IS_MTMSRD(bp->instr[0]) || IS_RFID(bp->instr[0])) {
printf("Breakpoint at %lx is on an mtmsrd or rfid "
"instruction, disabling it\n", bp->address);
bp->enabled = 0;
continue;
}
store_inst(&bp->instr[0]);
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
if (bp->enabled & BP_CIABR)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
powerpc/xmon: Add patch_instruction() support for xmon Move from mwrite() to patch_instruction() for xmon for breakpoint addition and removal. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27 14:48:58 +07:00
if (patch_instruction((unsigned int *)bp->address,
bpinstr) != 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("Couldn't write instruction at %lx, "
"disabling breakpoint there\n", bp->address);
bp->enabled &= ~BP_TRAP;
continue;
}
store_inst((void *)bp->address);
}
}
static void insert_cpu_bpts(void)
{
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
struct arch_hw_breakpoint brk;
if (dabr.enabled) {
brk.address = dabr.address;
brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
powerpc/watchpoint: Introduce macros for watchpoint length We are hadrcoding length everywhere in the watchpoint code. Introduce macros for the length and use them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-2-ravi.bangoria@linux.ibm.com
2019-10-17 16:31:58 +07:00
brk.len = DABR_MAX_LEN;
powerpc: Fix smp_processor_id() in preemptible splat in set_breakpoint Currently, on 8641D, which doesn't set CONFIG_HAVE_HW_BREAKPOINT we get the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: login/1382 caller is set_breakpoint+0x1c/0xa0 CPU: 0 PID: 1382 Comm: login Not tainted 3.15.0-rc3-00041-g2aafe1a4d451 #1 Call Trace: [decd5d80] [c0008dc4] show_stack+0x50/0x158 (unreliable) [decd5dc0] [c03c6fa0] dump_stack+0x7c/0xdc [decd5de0] [c01f8818] check_preemption_disabled+0xf4/0x104 [decd5e00] [c00086b8] set_breakpoint+0x1c/0xa0 [decd5e10] [c00d4530] flush_old_exec+0x2bc/0x588 [decd5e40] [c011c468] load_elf_binary+0x2ac/0x1164 [decd5ec0] [c00d35f8] search_binary_handler+0xc4/0x1f8 [decd5ef0] [c00d4ee8] do_execve+0x3d8/0x4b8 [decd5f40] [c001185c] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xfeee554 LR = 0xfeee7d4 The call path in this case is: flush_thread --> set_debug_reg_defaults --> set_breakpoint --> __get_cpu_var Since preemption is enabled in the cleanup of flush thread, and there is no need to disable it, introduce the distinction between set_breakpoint and __set_breakpoint, leaving only the flush_thread instance as the current user of set_breakpoint. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-30 02:25:17 +07:00
__set_breakpoint(&brk);
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
}
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
if (iabr)
set_ciabr(iabr->address);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
static void remove_bpts(void)
{
int i;
struct bpt *bp;
unsigned instr;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
if ((bp->enabled & (BP_TRAP|BP_CIABR)) != BP_TRAP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
if (mread(bp->address, &instr, 4) == 4
&& instr == bpinstr
powerpc/xmon: Add patch_instruction() support for xmon Move from mwrite() to patch_instruction() for xmon for breakpoint addition and removal. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27 14:48:58 +07:00
&& patch_instruction(
(unsigned int *)bp->address, bp->instr[0]) != 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("Couldn't remove breakpoint at %lx\n",
bp->address);
else
store_inst((void *)bp->address);
}
}
static void remove_cpu_bpts(void)
{
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
hw_breakpoint_disable();
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
write_ciabr(0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Add option to show uptime information It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-18 21:16:58 +07:00
/* Based on uptime_proc_show(). */
static void
show_uptime(void)
{
powerpc: xmon: use ktime_get_coarse_boottime64 get_monotonic_boottime() is deprecated, and may not be safe to call in every context, as it has to read a hardware clocksource. This changes xmon to print the time using ktime_get_coarse_boottime64() instead, which avoids the old timespec type and the HW access. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-18 16:56:24 +07:00
struct timespec64 uptime;
powerpc/xmon: Add option to show uptime information It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-18 21:16:58 +07:00
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
powerpc: xmon: use ktime_get_coarse_boottime64 get_monotonic_boottime() is deprecated, and may not be safe to call in every context, as it has to read a hardware clocksource. This changes xmon to print the time using ktime_get_coarse_boottime64() instead, which avoids the old timespec type and the HW access. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-18 16:56:24 +07:00
ktime_get_coarse_boottime_ts64(&uptime);
powerpc/xmon: Add option to show uptime information It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-18 21:16:58 +07:00
printf("Uptime: %lu.%.2lu seconds\n", (unsigned long)uptime.tv_sec,
((unsigned long)uptime.tv_nsec / (NSEC_PER_SEC/100)));
sync();
__delay(200); \
}
catch_memory_errors = 0;
}
powerpc/xmon: Paged output for paca display The paca display is already more than 24 lines, which can be problematic if you have an old school 80x24 terminal, or more likely you are on a virtual terminal which does not scroll for whatever reason. This patch adds a new command "#", which takes a single (hex) numeric argument: lines per page. It will cause the output of "dp" and "dpa" to be broken into pages, if necessary. Sample output: 0:mon> # 10 0:mon> dp1 paca for cpu 0x1 @ c00000000fdc0480: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x1 (0xa) kernel_toc = 0xc000000000eb2400 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) emergency_sp = 0xc00000003ffe8000 (0x28) mc_emergency_sp = 0xc00000003ffe4000 (0x2e0) in_mce = 0x0 (0x2e8) data_offset = 0x7f170000 (0x30) hw_cpu_id = 0x8 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) [Hit a key (a:all, q:truncate, any:next page)] 0:mon> __current = 0xc00000007e696620 (0x290) kstack = 0xc00000007e6ebe30 (0x298) stab_rr = 0xb (0x2a0) saved_r1 = 0xc00000007ef37860 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) 0:mon> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Use bool, make some variables static] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:23 +07:00
static void set_lpp_cmd(void)
{
unsigned long lpp;
if (!scanhex(&lpp)) {
printf("Invalid number.\n");
lpp = 0;
}
xmon_set_pagination_lpp(lpp);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* Command interpreting routine */
static char *last_cmd;
static int
cmds(struct pt_regs *excp)
{
int cmd = 0;
last_cmd = NULL;
xmon_regs = excp;
[POWERPC] print backtrace when entering xmon xmon does not print a backtrace per default. This is bad on systems with USB keyboard, the most needed info about the crash is lost. print a backtrace during the very first xmon entry. Booting with xmon=nobt disables the autobacktrace functionality. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-08 21:29:21 +07:00
powerpc/xmon: drop the nobt option from xmon plus minor fixes The xmon parameter nobt was added long time ago, by commit 26c8af5f01df ("[POWERPC] print backtrace when entering xmon"). The problem that time was that during a crash in a machine with USB keyboard, xmon wouldn't respond to commands from the keyboard, so printing the backtrace wouldn't be possible. Idea then was to show automatically the backtrace on xmon crash for the first time it's invoked (if it recovers, next time xmon won't show backtrace automatically). The nobt parameter was added _only_ to prevent this automatic trace show. Seems long time ago USB keyboards didn't work that well! We don't need this parameter anymore, the feature of auto showing the backtrace is interesting (imagine a case of auto-reboot script), so this patch extends the functionality, by always showing the backtrace automatically when xmon is invoked; it removes the nobt parameter too. Also, this patch fixes __initdata placement on xmon_early and replaces __initcall() with modern device_initcall() on sysrq handler. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:50 +07:00
xmon_show_stack(excp->gpr[1], excp->link, excp->nip);
[POWERPC] print backtrace when entering xmon xmon does not print a backtrace per default. This is bad on systems with USB keyboard, the most needed info about the crash is lost. print a backtrace during the very first xmon entry. Booting with xmon=nobt disables the autobacktrace functionality. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-08 21:29:21 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
for(;;) {
#ifdef CONFIG_SMP
printf("%x:", smp_processor_id());
#endif /* CONFIG_SMP */
printf("mon> ");
flush_input();
termch = 0;
cmd = skipbl();
if( cmd == '\n' ) {
if (last_cmd == NULL)
continue;
take_input(last_cmd);
last_cmd = NULL;
cmd = inchar();
}
switch (cmd) {
case 'm':
cmd = inchar();
switch (cmd) {
case 'm':
case 's':
case 'd':
memops(cmd);
break;
case 'l':
memlocate();
break;
case 'z':
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memzcan();
break;
case 'i':
lib/show_mem.c: teach show_mem to work with the given nodemask show_mem() allows to filter out node specific data which is irrelevant to the allocation request via SHOW_MEM_FILTER_NODES. The filtering is done in skip_free_areas_node which skips all nodes which are not in the mems_allowed of the current process. This works most of the time as expected because the nodemask shouldn't be outside of the allocating task but there are some exceptions. E.g. memory hotplug might want to request allocations from outside of the allowed nodes (see new_node_page). Get rid of this hardcoded behavior and push the allocation mask down the show_mem path and use it instead of cpuset_current_mems_allowed. NULL nodemask is interpreted as cpuset_current_mems_allowed. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 06:46:16 +07:00
show_mem(0, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
default:
termch = cmd;
memex();
}
break;
case 'd':
dump();
break;
case 'l':
symbol_lookup();
break;
case 'r':
prregs(excp); /* print regs */
break;
case 'e':
excprint(excp);
break;
case 'S':
super_regs();
break;
case 't':
backtrace(excp);
break;
case 'f':
cacheflush();
break;
case 's':
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
if (do_spu_cmd() == 0)
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (do_step(excp))
return cmd;
break;
case 'x':
case 'X':
powerpc/xmon: Disable tracing when entering xmon If tracing is enabled and you get into xmon, the tracing buffer continues to be updated, causing possible loss of data and unnecessary tracing information coming from xmon functions. This patch simple disables tracing when entering xmon, and re-enables it if the kernel is resumed (with 'x'). Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:06 +07:00
if (tracing_enabled)
tracing_on();
[PATCH] powerpc: udbg updates The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-30 12:54:12 +07:00
return cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case EOF:
[PATCH] powerpc: udbg updates The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-30 12:54:12 +07:00
printf(" <no input ...>\n");
mdelay(2000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return cmd;
case '?':
[POWERPC] fix showing xmon help In some configuration, xmon help string is larger than xmon_printf buffer. We need not to use printf. This patch adds xmon_puts and change to use it to show help string. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-18 16:26:40 +07:00
xmon_puts(help_string);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
powerpc/xmon: Paged output for paca display The paca display is already more than 24 lines, which can be problematic if you have an old school 80x24 terminal, or more likely you are on a virtual terminal which does not scroll for whatever reason. This patch adds a new command "#", which takes a single (hex) numeric argument: lines per page. It will cause the output of "dp" and "dpa" to be broken into pages, if necessary. Sample output: 0:mon> # 10 0:mon> dp1 paca for cpu 0x1 @ c00000000fdc0480: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x1 (0xa) kernel_toc = 0xc000000000eb2400 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) emergency_sp = 0xc00000003ffe8000 (0x28) mc_emergency_sp = 0xc00000003ffe4000 (0x2e0) in_mce = 0x0 (0x2e8) data_offset = 0x7f170000 (0x30) hw_cpu_id = 0x8 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) [Hit a key (a:all, q:truncate, any:next page)] 0:mon> __current = 0xc00000007e696620 (0x290) kstack = 0xc00000007e6ebe30 (0x298) stab_rr = 0xb (0x2a0) saved_r1 = 0xc00000007ef37860 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) 0:mon> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Use bool, make some variables static] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:23 +07:00
case '#':
set_lpp_cmd();
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 'b':
bpt_cmds();
break;
case 'C':
csum();
break;
case 'c':
if (cpu_cmd())
return 0;
break;
case 'z':
bootcmds();
break;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
case 'p':
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
proccall();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
case 'P':
show_tasks();
break;
powerpc: change CONFIG_PPC_STD_MMU to CONFIG_PPC_BOOK3S Today we have: config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config PPC_STD_MMU def_bool y depends on PPC_BOOK3S PPC_STD_MMU is therefore redundant with PPC_BOOK3S. Lets remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-17 17:25:04 +07:00
#ifdef CONFIG_PPC_BOOK3S
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 'u':
dump_segments();
break;
powerpc/xmon: Fix build when 4xx=y and 44x=n dump_tlb_44x() is only defined when 44x=y, but the ifdef in xmon.c checks for 4xx, leading to a build failure: arch/powerpc/xmon/xmon.c:912:4: error: implicit declaration of function 'dump_tlb_44x' Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-12 12:54:54 +07:00
#elif defined(CONFIG_44x)
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
case 'u':
dump_tlb_44x();
break;
powerpc/xmon: Fix the 'u' command description The 'u' command will print the TLB on book3e parts and the SLB on Book3s parts, but the help system doesn't say that correctly. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-29 18:25:10 +07:00
#elif defined(CONFIG_PPC_BOOK3E)
powerpc/book3e: Add TLB dump in xmon for Book3E Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09 12:34:50 +07:00
case 'u':
dump_tlb_book3e();
break;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#endif
powerpc/xmon: Add option to show uptime information It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-18 21:16:58 +07:00
case 'U':
show_uptime();
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
default:
printf("Unrecognized command: ");
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
do {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (' ' < cmd && cmd <= '~')
putchar(cmd);
else
printf("\\x%x", cmd);
cmd = inchar();
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
} while (cmd != '\n');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(" (type ? for help)\n");
break;
}
}
}
powerpc/booke: Fix xmon single step on PowerPC Book-E Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single stepping on 4xx boards. The functionality was lost when arch/ppc was removed. This patch restores single step support for 44x boards, and Book-E in general. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-05 11:46:05 +07:00
#ifdef CONFIG_BOOKE
static int do_step(struct pt_regs *regs)
{
regs->msr |= MSR_DE;
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
return 1;
}
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* Step a single instruction.
* Some instructions we emulate, others we execute with MSR_SE set.
*/
static int do_step(struct pt_regs *regs)
{
unsigned int instr;
int stepped;
powerpc/xmon: Also setup debugger hooks when single-stepping When single-stepping kernel code from xmon without a debug hook enabled the kernel crashes. This can happen when kernel starts with xmon on crash disabled but xmon is entered using sysrq. Call force_enable_xmon when single-stepping in xmon to install the xmon debug hooks. Fixes: e1368d0c9edb ("powerpc/xmon: Setup debugger hooks when first break-point is set") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-24 01:00:54 +07:00
force_enable_xmon();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* check we are in 64-bit kernel mode, translation enabled */
powerpc: Use MSR_64BIT in places Use the new MSR_64BIT in a few places. Some of these are already ifdef'ed for BOOKE vs BOOKS, but it's still clearer, MSR_SF does not immediately parse as "MSR bit for 64bit". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-08 04:56:03 +07:00
if ((regs->msr & (MSR_64BIT|MSR_PR|MSR_IR)) == (MSR_64BIT|MSR_IR)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (mread(regs->nip, &instr, 4) == 4) {
stepped = emulate_step(regs, instr);
if (stepped < 0) {
printf("Couldn't single-step %s instruction\n",
(IS_RFID(instr)? "rfid": "mtmsrd"));
return 0;
}
if (stepped > 0) {
regs->trap = 0xd00 | (regs->trap & 1);
printf("stepped to ");
xmon_print_symbol(regs->nip, " ", "\n");
ppc_inst_dump(regs->nip, 1, 0);
return 0;
}
}
}
regs->msr |= MSR_SE;
return 1;
}
powerpc/booke: Fix xmon single step on PowerPC Book-E Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single stepping on 4xx boards. The functionality was lost when arch/ppc was removed. This patch restores single step support for 44x boards, and Book-E in general. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-05 11:46:05 +07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void bootcmds(void)
{
int cmd;
cmd = inchar();
if (cmd == 'r')
ppc_md.restart(NULL);
else if (cmd == 'h')
ppc_md.halt();
else if (cmd == 'p')
powerpc: Convert power off logic to pm_power_off The generic Linux framework to power off the machine is a function pointer called pm_power_off. The trick about this pointer is that device drivers can potentially implement it rather than board files. Today on powerpc we set pm_power_off to invoke our generic full machine power off logic which then calls ppc_md.power_off to invoke machine specific power off. However, when we want to add a power off GPIO via the "gpio-poweroff" driver, this card house falls apart. That driver only registers itself if pm_power_off is NULL to ensure it doesn't override board specific logic. However, since we always set pm_power_off to the generic power off logic (which will just not power off the machine if no ppc_md.power_off call is implemented), we can't implement power off via the generic GPIO power off driver. To fix this up, let's get rid of the ppc_md.power_off logic and just always use pm_power_off as was intended. Then individual drivers such as the GPIO power off driver can implement power off logic via that function pointer. With this patch set applied and a few patches on top of QEMU that implement a power off GPIO on the virt e500 machine, I can successfully turn off my virtual machine after halt. Signed-off-by: Alexander Graf <agraf@suse.de> [mpe: Squash into one patch and update changelog based on cover letter] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-13 21:01:09 +07:00
if (pm_power_off)
pm_power_off();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
static int cpu_cmd(void)
{
#ifdef CONFIG_SMP
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
unsigned long cpu, first_cpu, last_cpu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
int timeout;
if (!scanhex(&cpu)) {
/* print cpus waiting or in xmon */
printf("cpus stopped:");
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
last_cpu = first_cpu = NR_CPUS;
powerpc/xmon: Use cpumask iterator to avoid warning We have a bug report where the kernel hits a warning in the cpumask code: WARNING: at include/linux/cpumask.h:107 Which is: WARN_ON_ONCE(cpu >= nr_cpumask_bits); The backtrace is: cpu_cmd cmds xmon_core xmon die xmon is iterating through 0 to NR_CPUS. I'm not sure why we are still open coding this but iterating above nr_cpu_ids is definitely a bug. This patch iterates through all possible cpus, in case we issue a system reset and CPUs in an offline state call in. Perhaps the old code was trying to handle CPUs that were in the partition but were never started (eg kexec into a kernel with an nr_cpus= boot option). They are going to die way before we get into xmon since we haven't set any kernel state up for them. Signed-off-by: Anton Blanchard <anton@samba.org> CC: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29 02:28:57 +07:00
for_each_possible_cpu(cpu) {
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
if (cpu == last_cpu + 1) {
last_cpu = cpu;
} else {
if (last_cpu != first_cpu)
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("-0x%lx", last_cpu);
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
last_cpu = first_cpu = cpu;
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf(" 0x%lx", cpu);
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
}
powerpc/xmon: Fix printing of set of CPUs in xmon Commit 24ec2125f3 ("powerpc/xmon: Use cpumask iterator to avoid warning") replaced a loop from 0 to NR_CPUS-1 with a for_each_possible_cpu() loop, which means that if the last possible cpu is in xmon, we print the wrong value for the end of the range. For example, if 4 cpus are possible, NR_CPUS is 128, and all cpus are in xmon, we print "0-7f" rather than "0-3". The code also assumes that the set of possible cpus is contiguous, which may not necessarily be true. This fixes the code to check explicitly for contiguity, and to print the ending value correctly. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-03 17:16:23 +07:00
if (last_cpu != first_cpu)
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("-0x%lx", last_cpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("\n");
return 0;
}
/* try to switch to cpu specified */
powerpc: Convert old cpumask API into new one Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-28 12:07:23 +07:00
if (!cpumask_test_cpu(cpu, &cpus_in_xmon)) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("cpu 0x%lx isn't in xmon\n", cpu);
powerpc/64: Save stack pointer when we hard disable interrupts A CPU that gets stuck with interrupts hard disable can be difficult to debug, as on some platforms we have no way to interrupt the CPU to find out what it's doing. A stop-gap is to have the CPU save it's stack pointer (r1) in its paca when it hard disables interrupts. That way if we can't interrupt it, we can at least trace the stack based on where it last disabled interrupts. In some cases that will be total junk, but the stack trace code should handle that. In the simple case of a CPU that disable interrupts and then gets stuck in a loop, the stack trace should be informative. We could clear the saved stack pointer when we enable interrupts, but that loses information which could be useful if we have nothing else to go on. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
2018-05-02 20:07:26 +07:00
#ifdef CONFIG_PPC64
printf("backtrace of paca[0x%lx].saved_r1 (possibly stale):\n", cpu);
xmon_show_stack(paca_ptrs[cpu]->saved_r1, 0, 0);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
}
xmon_taken = 0;
mb();
xmon_owner = cpu;
timeout = 10000000;
while (!xmon_taken) {
if (--timeout == 0) {
if (test_and_set_bit(0, &xmon_taken))
break;
/* take control back */
mb();
xmon_owner = smp_processor_id();
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("cpu 0x%lx didn't take control\n", cpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
}
barrier();
}
return 1;
#else
return 0;
#endif /* CONFIG_SMP */
}
static unsigned short fcstab[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
};
#define FCS(fcs, c) (((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
static void
csum(void)
{
unsigned int i;
unsigned short fcs;
unsigned char v;
if (!scanhex(&adrs))
return;
if (!scanhex(&ncsum))
return;
fcs = 0xffff;
for (i = 0; i < ncsum; ++i) {
if (mread(adrs+i, &v, 1) == 0) {
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("csum stopped at "REG"\n", adrs+i);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
}
fcs = FCS(fcs, v);
}
printf("%x\n", fcs);
}
/*
* Check if this is a suitable place to put a breakpoint.
*/
static long check_bp_loc(unsigned long addr)
{
unsigned int instr;
addr &= ~3;
[PATCH] powerpc: Add a is_kernel_addr() macro There's a bunch of code that compares an address with KERNELBASE to see if it's a "kernel address", ie. >= KERNELBASE. The proper test is actually to compare with PAGE_OFFSET, since we're going to change KERNELBASE soon. So replace all of them with an is_kernel_addr() macro that does that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 14:39:15 +07:00
if (!is_kernel_addr(addr)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("Breakpoints may only be placed at kernel addresses\n");
return 0;
}
if (!mread(addr, &instr, sizeof(instr))) {
printf("Can't read instruction at address %lx\n", addr);
return 0;
}
if (IS_MTMSRD(instr) || IS_RFID(instr)) {
printf("Breakpoints may not be placed on mtmsrd or rfid "
"instructions\n");
return 0;
}
return 1;
}
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
static char *breakpoint_help_string =
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"Breakpoint command usage:\n"
"b show breakpoints\n"
"b <addr> [cnt] set breakpoint at given instr addr\n"
"bc clear all breakpoints\n"
"bc <n/addr> clear breakpoint number n or at addr\n"
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
"bi <addr> [cnt] set hardware instr breakpoint (POWER8 only)\n"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"bd <addr> [cnt] set hardware data breakpoint\n"
"";
static void
bpt_cmds(void)
{
int cmd;
unsigned long a;
powerpc/xmon: Fix compile error with PPC_8xx=y Rearrange the code so that mode and badaddr are only defined when they're used. Also unsplit the string for easier grepping, and switch from CONFIG_8xx which is deprecated to CONFIG_PPC_8xx. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-12 07:47:07 +07:00
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
struct bpt *bp;
cmd = inchar();
powerpc/xmon: Allow listing and clearing breakpoints in read-only mode Read-only mode should not prevent listing and clearing any active breakpoints. Tested-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-2-cmr@informatik.wtf
2019-09-07 13:11:23 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
switch (cmd) {
powerpc/xmon: Fix compile error with PPC_8xx=y Rearrange the code so that mode and badaddr are only defined when they're used. Also unsplit the string for easier grepping, and switch from CONFIG_8xx which is deprecated to CONFIG_PPC_8xx. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-12 07:47:07 +07:00
#ifndef CONFIG_PPC_8xx
static const char badaddr[] = "Only kernel addresses are permitted for breakpoints\n";
int mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 'd': /* bd - hardware data breakpoint */
powerpc/xmon: Allow listing and clearing breakpoints in read-only mode Read-only mode should not prevent listing and clearing any active breakpoints. Tested-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-2-cmr@informatik.wtf
2019-09-07 13:11:23 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
powerpc: Update xmon to use ppc_breakpoint_available() The 'bd' command will now print an error and not set the breakpoint on P9. Signed-off-by: Michael Neuling <mikey@neuling.org> [mpe: Unsplit quoted string] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-27 11:37:19 +07:00
if (!ppc_breakpoint_available()) {
printf("Hardware data breakpoint not supported on this cpu\n");
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mode = 7;
cmd = inchar();
if (cmd == 'r')
mode = 5;
else if (cmd == 'w')
mode = 6;
else
termch = cmd;
dabr.address = 0;
dabr.enabled = 0;
if (scanhex(&dabr.address)) {
[PATCH] powerpc: Add a is_kernel_addr() macro There's a bunch of code that compares an address with KERNELBASE to see if it's a "kernel address", ie. >= KERNELBASE. The proper test is actually to compare with PAGE_OFFSET, since we're going to change KERNELBASE soon. So replace all of them with an is_kernel_addr() macro that does that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 14:39:15 +07:00
if (!is_kernel_addr(dabr.address)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(badaddr);
break;
}
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
dabr.address &= ~HW_BRK_TYPE_DABR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dabr.enabled = mode | BP_DABR;
}
powerpc/xmon: Setup debugger hooks when first break-point is set Presently sysrq key for xmon('x') is registered during kernel init irrespective of the value of kernel param 'xmon'. Thus xmon is enabled even if 'xmon=off' is passed on the kernel command line. However this doesn't enable the kernel debugger hooks needed for instruction or data breakpoints. Thus when a break-point is hit with xmon=off a kernel oops of the form below is reported: Oops: Exception in kernel mode, sig: 5 [#1] < snip > Trace/breakpoint trap To fix this the patch checks and enables debugger hooks when an instruction or data break-point is set via xmon console. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Just printf directly, no need for static const char[]] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:30:25 +07:00
force_enable_xmon();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case 'i': /* bi - hardware instr breakpoint */
powerpc/xmon: Allow listing and clearing breakpoints in read-only mode Read-only mode should not prevent listing and clearing any active breakpoints. Tested-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-2-cmr@informatik.wtf
2019-09-07 13:11:23 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
powerpc/xmon: Enable HW instruction breakpoint on POWER8 This patch enables support for hardware instruction breakpoint in xmon on POWER8 platform with the help of a new register called the CIABR (Completed Instruction Address Breakpoint Register). With this patch, a single hardware instruction breakpoint can be added and cleared during any active xmon debug session. The hardware based instruction breakpoint mechanism works correctly with the existing TRAP based instruction breakpoint available on xmon. There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch has re-purposed all the existing IABR related code to work with CIABR register based HW instruction breakpoint. This has one odd feature, which is that when we hit a breakpoint xmon doesn't tell us we have hit the breakpoint. This is because xmon is expecting bp->address == regs->nip. Because CIABR fires on completition regs->nip points to the instruction after the breakpoint. We could fix that, but it would then confuse other parts of the xmon code which think we need to emulate the instruction. [mpe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2014-11-28 11:36:42 +07:00
if (!cpu_has_feature(CPU_FTR_ARCH_207S)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("Hardware instruction breakpoint "
"not supported on this cpu\n");
break;
}
if (iabr) {
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
iabr->enabled &= ~BP_CIABR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
iabr = NULL;
}
if (!scanhex(&a))
break;
if (!check_bp_loc(a))
break;
bp = new_breakpoint(a);
if (bp != NULL) {
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
bp->enabled |= BP_CIABR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
iabr = bp;
powerpc/xmon: Setup debugger hooks when first break-point is set Presently sysrq key for xmon('x') is registered during kernel init irrespective of the value of kernel param 'xmon'. Thus xmon is enabled even if 'xmon=off' is passed on the kernel command line. However this doesn't enable the kernel debugger hooks needed for instruction or data breakpoints. Thus when a break-point is hit with xmon=off a kernel oops of the form below is reported: Oops: Exception in kernel mode, sig: 5 [#1] < snip > Trace/breakpoint trap To fix this the patch checks and enables debugger hooks when an instruction or data break-point is set via xmon console. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Just printf directly, no need for static const char[]] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:30:25 +07:00
force_enable_xmon();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
break;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 'c':
if (!scanhex(&a)) {
/* clear all breakpoints */
for (i = 0; i < NBPTS; ++i)
bpts[i].enabled = 0;
iabr = NULL;
dabr.enabled = 0;
printf("All breakpoints cleared\n");
break;
}
if (a <= NBPTS && a >= 1) {
/* assume a breakpoint number */
bp = &bpts[a-1]; /* bp nums are 1 based */
} else {
/* assume a breakpoint address */
bp = at_breakpoint(a);
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
if (bp == NULL) {
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("No breakpoint at %lx\n", a);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
}
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("Cleared breakpoint %tx (", BP_NUM(bp));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(bp->address, " ", ")\n");
bp->enabled = 0;
break;
default:
termch = cmd;
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
cmd = skipbl();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (cmd == '?') {
printf(breakpoint_help_string);
break;
}
termch = cmd;
powerpc/xmon: Allow listing and clearing breakpoints in read-only mode Read-only mode should not prevent listing and clearing any active breakpoints. Tested-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-2-cmr@informatik.wtf
2019-09-07 13:11:23 +07:00
if (xmon_is_ro || !scanhex(&a)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* print all breakpoints */
printf(" type address\n");
if (dabr.enabled) {
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf(" data "REG" [", dabr.address);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (dabr.enabled & 1)
printf("r");
if (dabr.enabled & 2)
printf("w");
printf("]\n");
}
for (bp = bpts; bp < &bpts[NBPTS]; ++bp) {
if (!bp->enabled)
continue;
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("%tx %s ", BP_NUM(bp),
powerpc/xmon: Cleanup the breakpoint flags Drop BP_IABR_TE, which though used, does not do anything useful. Rename BP_IABR to BP_CIABR. Renumber the flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-01 12:54:13 +07:00
(bp->enabled & BP_CIABR) ? "inst": "trap");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(bp->address, " ", "\n");
}
break;
}
if (!check_bp_loc(a))
break;
bp = new_breakpoint(a);
powerpc/xmon: Setup debugger hooks when first break-point is set Presently sysrq key for xmon('x') is registered during kernel init irrespective of the value of kernel param 'xmon'. Thus xmon is enabled even if 'xmon=off' is passed on the kernel command line. However this doesn't enable the kernel debugger hooks needed for instruction or data breakpoints. Thus when a break-point is hit with xmon=off a kernel oops of the form below is reported: Oops: Exception in kernel mode, sig: 5 [#1] < snip > Trace/breakpoint trap To fix this the patch checks and enables debugger hooks when an instruction or data break-point is set via xmon console. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Just printf directly, no need for static const char[]] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:30:25 +07:00
if (bp != NULL) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bp->enabled |= BP_TRAP;
powerpc/xmon: Setup debugger hooks when first break-point is set Presently sysrq key for xmon('x') is registered during kernel init irrespective of the value of kernel param 'xmon'. Thus xmon is enabled even if 'xmon=off' is passed on the kernel command line. However this doesn't enable the kernel debugger hooks needed for instruction or data breakpoints. Thus when a break-point is hit with xmon=off a kernel oops of the form below is reported: Oops: Exception in kernel mode, sig: 5 [#1] < snip > Trace/breakpoint trap To fix this the patch checks and enables debugger hooks when an instruction or data break-point is set via xmon console. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Just printf directly, no need for static const char[]] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:30:25 +07:00
force_enable_xmon();
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
}
}
/* Very cheap human name for vector lookup. */
static
const char *getvecname(unsigned long vec)
{
char *ret;
switch (vec) {
case 0x100: ret = "(System Reset)"; break;
case 0x200: ret = "(Machine Check)"; break;
case 0x300: ret = "(Data Access)"; break;
powerpc/xmon: Teach xmon oops about radix vectors Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a print which assumes SLB problems. With radix, these vectors have different meanings. This patch updates the oops message to reflect these different meanings. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-16 10:04:40 +07:00
case 0x380:
if (radix_enabled())
ret = "(Data Access Out of Range)";
else
ret = "(Data SLB Access)";
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 0x400: ret = "(Instruction Access)"; break;
powerpc/xmon: Teach xmon oops about radix vectors Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a print which assumes SLB problems. With radix, these vectors have different meanings. This patch updates the oops message to reflect these different meanings. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-16 10:04:40 +07:00
case 0x480:
if (radix_enabled())
ret = "(Instruction Access Out of Range)";
else
ret = "(Instruction SLB Access)";
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 0x500: ret = "(Hardware Interrupt)"; break;
case 0x600: ret = "(Alignment)"; break;
case 0x700: ret = "(Program Check)"; break;
case 0x800: ret = "(FPU Unavailable)"; break;
case 0x900: ret = "(Decrementer)"; break;
powerpc: Add more trap names to xmon We haven't updated these for a while it seems, it's nice to have in the oops output. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15 12:22:16 +07:00
case 0x980: ret = "(Hypervisor Decrementer)"; break;
case 0xa00: ret = "(Doorbell)"; break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 0xc00: ret = "(System Call)"; break;
case 0xd00: ret = "(Single Step)"; break;
powerpc: Add more trap names to xmon We haven't updated these for a while it seems, it's nice to have in the oops output. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15 12:22:16 +07:00
case 0xe40: ret = "(Emulation Assist)"; break;
case 0xe60: ret = "(HMI)"; break;
case 0xe80: ret = "(Hypervisor Doorbell)"; break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 0xf00: ret = "(Performance Monitor)"; break;
case 0xf20: ret = "(Altivec Unavailable)"; break;
case 0x1300: ret = "(Instruction Breakpoint)"; break;
powerpc: Add more trap names to xmon We haven't updated these for a while it seems, it's nice to have in the oops output. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15 12:22:16 +07:00
case 0x1500: ret = "(Denormalisation)"; break;
case 0x1700: ret = "(Altivec Assist)"; break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
default: ret = "";
}
return ret;
}
static void get_function_bounds(unsigned long pc, unsigned long *startp,
unsigned long *endp)
{
unsigned long size, offset;
const char *name;
*startp = *endp = 0;
if (pc == 0)
return;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
Simplify kallsyms_lookup() Several kallsyms_lookup() pass dummy arguments but only need, say, module's name. Make kallsyms_lookup() accept NULLs where possible. Also, makes picture clearer about what interfaces are needed for all symbol resolving business. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 14:28:41 +07:00
name = kallsyms_lookup(pc, &size, &offset, NULL, tmpstr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (name != NULL) {
*startp = pc - offset;
*endp = pc - offset + size;
}
sync();
}
catch_memory_errors = 0;
}
[POWERPC] Move stackframe definitions to common header This moves various definitions used all over the place to parse stack frames to ptrace.h so only one definition is needed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17 11:34:59 +07:00
#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long))
#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc)
{
powerpc/xmon: Fiddle xmon_depth_to_print logic in xmon_show_stack() Currently xmon_depth_to_print is static and global, but it's only ever used in xmon_show_stack(). At least with a modern compiler it's inlined, so there's no point in it being static, we could #define it but it's only used in one place. By reworking the logic we can drop count and just decrement the max value as a loop counter. Also switch to a while loop so we actually print no more than 64 frames as you'd expect based on the variable name. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-09 11:20:36 +07:00
int max_to_print = 64;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned long ip;
unsigned long newsp;
unsigned long marker;
struct pt_regs regs;
powerpc/xmon: Fiddle xmon_depth_to_print logic in xmon_show_stack() Currently xmon_depth_to_print is static and global, but it's only ever used in xmon_show_stack(). At least with a modern compiler it's inlined, so there's no point in it being static, we could #define it but it's only used in one place. By reworking the logic we can drop count and just decrement the max value as a loop counter. Also switch to a while loop so we actually print no more than 64 frames as you'd expect based on the variable name. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-09 11:20:36 +07:00
while (max_to_print--) {
powerpc/xmon: Cleanup to use is_kernel_addr macro Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-05 18:08:15 +07:00
if (!is_kernel_addr(sp)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (sp != 0)
printf("SP (%lx) is in userspace\n", sp);
break;
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
if (!mread(sp + LRSAVE_OFFSET, &ip, sizeof(unsigned long))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
|| !mread(sp, &newsp, sizeof(unsigned long))) {
printf("Couldn't read stack frame at %lx\n", sp);
break;
}
/*
* For the first stack frame, try to work out if
* LR and/or the saved LR value in the bottommost
* stack frame are valid.
*/
if ((pc | lr) != 0) {
unsigned long fnstart, fnend;
unsigned long nextip;
int printip = 1;
get_function_bounds(pc, &fnstart, &fnend);
nextip = 0;
if (newsp > sp)
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
mread(newsp + LRSAVE_OFFSET, &nextip,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sizeof(unsigned long));
if (lr == ip) {
powerpc/xmon: Cleanup to use is_kernel_addr macro Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-05 18:08:15 +07:00
if (!is_kernel_addr(lr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
|| (fnstart <= lr && lr < fnend))
printip = 0;
} else if (lr == nextip) {
printip = 0;
powerpc/xmon: Cleanup to use is_kernel_addr macro Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-05 18:08:15 +07:00
} else if (is_kernel_addr(lr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
&& !(fnstart <= lr && lr < fnend)) {
printf("[link register ] ");
xmon_print_symbol(lr, " ", "\n");
}
if (printip) {
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf("["REG"] ", sp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(ip, " ", " (unreliable)\n");
}
pc = lr = 0;
} else {
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf("["REG"] ", sp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(ip, " ", "\n");
}
/* Look for "regshere" marker to see if this is
an exception frame. */
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
[POWERPC] Move stackframe definitions to common header This moves various definitions used all over the place to parse stack frames to ptrace.h so only one definition is needed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17 11:34:59 +07:00
&& marker == STACK_FRAME_REGS_MARKER) {
powerpc/xmon: Use STACK_FRAME_OVERHEAD in xmon_show_stack() We use STACK_FRAME_OVERHEAD in the exception vectors to establish the exception frame, so it should be good enough to use here. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-09 11:20:35 +07:00
if (mread(sp + STACK_FRAME_OVERHEAD, &regs, sizeof(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
!= sizeof(regs)) {
printf("Couldn't read registers at %lx\n",
powerpc/xmon: Use STACK_FRAME_OVERHEAD in xmon_show_stack() We use STACK_FRAME_OVERHEAD in the exception vectors to establish the exception frame, so it should be good enough to use here. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-09 11:20:35 +07:00
sp + STACK_FRAME_OVERHEAD);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
}
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
printf("--- Exception: %lx %s at ", regs.trap,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
getvecname(TRAP(&regs)));
pc = regs.nip;
lr = regs.link;
xmon_print_symbol(pc, " ", "\n");
}
if (newsp == 0)
break;
sp = newsp;
powerpc/xmon: Fiddle xmon_depth_to_print logic in xmon_show_stack() Currently xmon_depth_to_print is static and global, but it's only ever used in xmon_show_stack(). At least with a modern compiler it's inlined, so there's no point in it being static, we could #define it but it's only used in one place. By reworking the logic we can drop count and just decrement the max value as a loop counter. Also switch to a while loop so we actually print no more than 64 frames as you'd expect based on the variable name. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-09 11:20:36 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
static void backtrace(struct pt_regs *excp)
{
unsigned long sp;
if (scanhex(&sp))
xmon_show_stack(sp, 0, 0);
else
xmon_show_stack(excp->gpr[1], excp->link, excp->nip);
scannl();
}
static void print_bug_trap(struct pt_regs *regs)
{
powerpc: Fix compile errors with CONFIG_BUG=n This makes sure we don't try to call find_bug or is_warning_bug when CONFIG_BUG=n and CONFIG_XMON=y. Otherwise we get these errors: arch/powerpc/xmon/xmon.c: In function ‘print_bug_trap’: arch/powerpc/xmon/xmon.c:1364: error: implicit declaration of function ‘find_bug’ arch/powerpc/xmon/xmon.c:1364: warning: assignment makes pointer from integer without a cast arch/powerpc/xmon/xmon.c:1367: error: implicit declaration of function ‘is_warning_bug’ arch/powerpc/xmon/xmon.c:1374: error: dereferencing pointer to incomplete type make[2]: *** [arch/powerpc/xmon/xmon.o] Error 1 make[1]: *** [arch/powerpc/xmon] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 17:34:09 +07:00
#ifdef CONFIG_BUG
[POWERPC] Generic BUG for powerpc This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 18:30:41 +07:00
const struct bug_entry *bug;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned long addr;
if (regs->msr & MSR_PR)
return; /* not in kernel */
addr = regs->nip; /* address of trap instruction */
powerpc/xmon: Cleanup to use is_kernel_addr macro Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-05 18:08:15 +07:00
if (!is_kernel_addr(addr))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return;
bug = find_bug(regs->nip);
if (bug == NULL)
return;
[POWERPC] Generic BUG for powerpc This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 18:30:41 +07:00
if (is_warning_bug(bug))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return;
[POWERPC] Allow xmon to build without CONFIG_DEBUG_BUGVERBOSE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 13:05:34 +07:00
#ifdef CONFIG_DEBUG_BUGVERBOSE
[POWERPC] Generic BUG for powerpc This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 18:30:41 +07:00
printf("kernel BUG at %s:%u!\n",
bug->file, bug->line);
[POWERPC] Allow xmon to build without CONFIG_DEBUG_BUGVERBOSE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 13:05:34 +07:00
#else
powerpc/xmon: Don't print hashed pointers in xmon Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 19:23:28 +07:00
printf("kernel BUG at %px!\n", (void *)bug->bug_addr);
[POWERPC] Allow xmon to build without CONFIG_DEBUG_BUGVERBOSE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 13:05:34 +07:00
#endif
powerpc: Fix compile errors with CONFIG_BUG=n This makes sure we don't try to call find_bug or is_warning_bug when CONFIG_BUG=n and CONFIG_XMON=y. Otherwise we get these errors: arch/powerpc/xmon/xmon.c: In function ‘print_bug_trap’: arch/powerpc/xmon/xmon.c:1364: error: implicit declaration of function ‘find_bug’ arch/powerpc/xmon/xmon.c:1364: warning: assignment makes pointer from integer without a cast arch/powerpc/xmon/xmon.c:1367: error: implicit declaration of function ‘is_warning_bug’ arch/powerpc/xmon/xmon.c:1374: error: dereferencing pointer to incomplete type make[2]: *** [arch/powerpc/xmon/xmon.o] Error 1 make[1]: *** [arch/powerpc/xmon] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 17:34:09 +07:00
#endif /* CONFIG_BUG */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void excprint(struct pt_regs *fp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
unsigned long trap;
#ifdef CONFIG_SMP
printf("cpu 0x%x: ", smp_processor_id());
#endif /* CONFIG_SMP */
trap = TRAP(fp);
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("Vector: %lx %s at [%px]\n", fp->trap, getvecname(trap), fp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(" pc: ");
xmon_print_symbol(fp->nip, ": ", "\n");
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf(" lr: ");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
xmon_print_symbol(fp->link, ": ", "\n");
printf(" sp: %lx\n", fp->gpr[1]);
printf(" msr: %lx\n", fp->msr);
powerpc: Save DAR and DSISR in pt_regs on MCE We were not saving DAR and DSISR on MCE. Save then and also print the values along with exception details in xmon. Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-28 16:37:26 +07:00
if (trap == 0x300 || trap == 0x380 || trap == 0x600 || trap == 0x200) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(" dar: %lx\n", fp->dar);
if (trap != 0x380)
printf(" dsisr: %lx\n", fp->dsisr);
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf(" current = 0x%px\n", current);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#ifdef CONFIG_PPC64
powerpc/64: change softe to irqmask in show_regs and xmon When the soft enabled flag was changed to a soft disable mask, xmon and register dump code was not updated to reflect that, which is confusing ('SOFTE: 1' previously meant interrupts were soft enabled, currently it means the opposite, the general interrupt type has been disabled). Fix this by using the name irqmask, and printing it in hex. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-10 08:04:24 +07:00
printf(" paca = 0x%px\t irqmask: 0x%02x\t irq_happened: 0x%02x\n",
powerpc/64: Rename soft_enabled to irq_soft_mask Rename the paca->soft_enabled to paca->irq_soft_mask as it is no longer used as a flag for interrupt state, but a mask. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 10:55:50 +07:00
local_paca, local_paca->irq_soft_mask, local_paca->irq_happened);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (current) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf(" pid = %d, comm = %s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
current->pid, current->comm);
}
if (trap == 0x700)
print_bug_trap(fp);
powerpc/xmon: Append linux_banner to exception information in xmon. Currently if you are in xmon without an oops etc. to view the kernel version you have to type "d $linux_banner" - not necessarily obvious. As this is useful information, append to the output of "e" command. Example output: $mon> e cpu 0x1: Vector: 0 at [c0000000f879ba80] pc: c000000000081718: sysrq_handle_xmon+0x68/0x80 lr: c000000000081718: sysrq_handle_xmon+0x68/0x80 sp: c0000000f879bbe0 msr: 8000000000009033 current = 0xc0000000f604d5c0 paca = 0xc00000000fdc0480 softe: 0 irq_happened: 0x01 pid = 2467, comm = bash Linux version 4.4.0-rc2-00008-gc51af91c3ab3-dirty (rashmica@circle) (gcc version 5.1.1 20150629 (GCC) ) #45 SMP Wed Nov 25 10:25:12 AEDT 2015 Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-25 09:46:25 +07:00
printf(linux_banner);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void prregs(struct pt_regs *fp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
int n, trap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned long base;
struct pt_regs regs;
if (scanhex(&base)) {
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
regs = *(struct pt_regs *)base;
sync();
__delay(200);
} else {
catch_memory_errors = 0;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf("*** Error reading registers from "REG"\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
base);
return;
}
catch_memory_errors = 0;
fp = &regs;
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#ifdef CONFIG_PPC64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (FULL_REGS(fp)) {
for (n = 0; n < 16; ++n)
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("R%.2d = "REG" R%.2d = "REG"\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
n, fp->gpr[n], n+16, fp->gpr[n+16]);
} else {
for (n = 0; n < 7; ++n)
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("R%.2d = "REG" R%.2d = "REG"\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
n, fp->gpr[n], n+7, fp->gpr[n+7]);
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#else
for (n = 0; n < 32; ++n) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("R%.2d = %.8lx%s", n, fp->gpr[n],
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
(n & 3) == 3? "\n": " ");
if (n == 12 && !FULL_REGS(fp)) {
printf("\n");
break;
}
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("pc = ");
xmon_print_symbol(fp->nip, " ", "\n");
powerpc: Save Come-From Address Register (CFAR) in exception frame Recent 64-bit server processors (POWER6 and POWER7) have a "Come-From Address Register" (CFAR), that records the address of the most recent branch or rfid (return from interrupt) instruction for debugging purposes. This saves the value of the CFAR in the exception entry code and stores it in the exception frame. We also make xmon print the CFAR value in its register dump code. Rather than extend the pt_regs struct at this time, we steal the orig_gpr3 field, which is only used for system calls, and use it for the CFAR value for all exceptions/interrupts other than system calls. This means we don't save the CFAR on system calls, which is not a great problem since system calls tend not to happen unexpectedly, and also avoids adding the overhead of reading the CFAR to the system call entry path. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-02 02:48:20 +07:00
if (TRAP(fp) != 0xc00 && cpu_has_feature(CPU_FTR_CFAR)) {
printf("cfar= ");
xmon_print_symbol(fp->orig_gpr3, " ", "\n");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("lr = ");
xmon_print_symbol(fp->link, " ", "\n");
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf("msr = "REG" cr = %.8lx\n", fp->msr, fp->ccr);
printf("ctr = "REG" xer = "REG" trap = %4lx\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
fp->ctr, fp->xer, fp->trap);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
trap = TRAP(fp);
if (trap == 0x300 || trap == 0x380 || trap == 0x600)
printf("dar = "REG" dsisr = %.8lx\n", fp->dar, fp->dsisr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void cacheflush(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
int cmd;
unsigned long nflush;
cmd = inchar();
if (cmd != 'i')
termch = cmd;
scanhex((void *)&adrs);
if (termch != '\n')
termch = 0;
nflush = 1;
scanhex(&nflush);
nflush = (nflush + L1_CACHE_BYTES - 1) / L1_CACHE_BYTES;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
if (cmd != 'i') {
for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
cflush((void *) adrs);
} else {
for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
cinval((void *) adrs);
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
}
catch_memory_errors = 0;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
extern unsigned long xmon_mfspr(int spr, unsigned long default_value);
extern void xmon_mtspr(int spr, unsigned long value);
static int
read_spr(int n, unsigned long *vp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
unsigned long ret = -1UL;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
int ok = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (setjmp(bus_error_jmp) == 0) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
catch_spr_faults = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
ret = xmon_mfspr(n, *vp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
*vp = ret;
ok = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
catch_spr_faults = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
return ok;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
write_spr(int n, unsigned long val)
{
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
return;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (setjmp(bus_error_jmp) == 0) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
catch_spr_faults = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
xmon_mtspr(n, val);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
} else {
printf("SPR 0x%03x (%4d) Faulted during write\n", n, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
catch_spr_faults = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
static void dump_206_sprs(void)
{
#ifdef CONFIG_PPC64
if (!cpu_has_feature(CPU_FTR_ARCH_206))
return;
/* Actually some of these pre-date 2.06, but whatevs */
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("srr0 = %.16lx srr1 = %.16lx dsisr = %.8lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_SRR0), mfspr(SPRN_SRR1), mfspr(SPRN_DSISR));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("dscr = %.16lx ppr = %.16lx pir = %.8lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_DSCR), mfspr(SPRN_PPR), mfspr(SPRN_PIR));
powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dump This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and IAMR SPRs based on their supported ISA revisions. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:43:34 +07:00
printf("amr = %.16lx uamor = %.16lx\n",
mfspr(SPRN_AMR), mfspr(SPRN_UAMOR));
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
if (!(mfmsr() & MSR_HV))
return;
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("sdr1 = %.16lx hdar = %.16lx hdsisr = %.8lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_SDR1), mfspr(SPRN_HDAR), mfspr(SPRN_HDSISR));
powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dump This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and IAMR SPRs based on their supported ISA revisions. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:43:34 +07:00
printf("hsrr0 = %.16lx hsrr1 = %.16lx hdec = %.16lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_HSRR0), mfspr(SPRN_HSRR1), mfspr(SPRN_HDEC));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("lpcr = %.16lx pcr = %.16lx lpidr = %.8lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_LPCR), mfspr(SPRN_PCR), mfspr(SPRN_LPID));
powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dump This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and IAMR SPRs based on their supported ISA revisions. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:43:34 +07:00
printf("hsprg0 = %.16lx hsprg1 = %.16lx amor = %.16lx\n",
mfspr(SPRN_HSPRG0), mfspr(SPRN_HSPRG1), mfspr(SPRN_AMOR));
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("dabr = %.16lx dabrx = %.16lx\n",
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
mfspr(SPRN_DABR), mfspr(SPRN_DABRX));
#endif
}
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
static void dump_207_sprs(void)
{
#ifdef CONFIG_PPC64
unsigned long msr;
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
return;
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("dpdes = %.16lx tir = %.16lx cir = %.8lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_DPDES), mfspr(SPRN_TIR), mfspr(SPRN_CIR));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("fscr = %.16lx tar = %.16lx pspb = %.8lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_FSCR), mfspr(SPRN_TAR), mfspr(SPRN_PSPB));
msr = mfmsr();
if (msr & MSR_TM) {
/* Only if TM has been enabled in the kernel */
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("tfhar = %.16lx tfiar = %.16lx texasr = %.16lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_TFHAR), mfspr(SPRN_TFIAR),
mfspr(SPRN_TEXASR));
}
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("mmcr0 = %.16lx mmcr1 = %.16lx mmcr2 = %.16lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_MMCR0), mfspr(SPRN_MMCR1), mfspr(SPRN_MMCR2));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("pmc1 = %.8lx pmc2 = %.8lx pmc3 = %.8lx pmc4 = %.8lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_PMC1), mfspr(SPRN_PMC2),
mfspr(SPRN_PMC3), mfspr(SPRN_PMC4));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("mmcra = %.16lx siar = %.16lx pmc5 = %.8lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_MMCRA), mfspr(SPRN_SIAR), mfspr(SPRN_PMC5));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("sdar = %.16lx sier = %.16lx pmc6 = %.8lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_SDAR), mfspr(SPRN_SIER), mfspr(SPRN_PMC6));
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("ebbhr = %.16lx ebbrr = %.16lx bescr = %.16lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_EBBHR), mfspr(SPRN_EBBRR), mfspr(SPRN_BESCR));
powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dump This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and IAMR SPRs based on their supported ISA revisions. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:43:34 +07:00
printf("iamr = %.16lx\n", mfspr(SPRN_IAMR));
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
if (!(msr & MSR_HV))
return;
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("hfscr = %.16lx dhdes = %.16lx rpr = %.16lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_HFSCR), mfspr(SPRN_DHDES), mfspr(SPRN_RPR));
powerpc/xmon: Fix display of SPRs Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:22:36 +07:00
printf("dawr = %.16lx dawrx = %.16lx ciabr = %.16lx\n",
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
mfspr(SPRN_DAWR), mfspr(SPRN_DAWRX), mfspr(SPRN_CIABR));
#endif
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: Add ISA v3.0 SPRs to SPR dump Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR in ISA 3.0 hypervisor mode. SPRN_PSSCR_PR is the privileged mode access and is used when we are not in hypervisor mode. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:45:09 +07:00
static void dump_300_sprs(void)
{
#ifdef CONFIG_PPC64
bool hv = mfmsr() & MSR_HV;
if (!cpu_has_feature(CPU_FTR_ARCH_300))
return;
printf("pidr = %.16lx tidr = %.16lx\n",
mfspr(SPRN_PID), mfspr(SPRN_TIDR));
powerpc/xmon: don't access ASDR in VMs ASDR is HV-privileged and must only be accessed in HV-mode. Fixes a Program Check (0x700) when xmon in a VM dumps SPRs. Fixes: d1e1b351f50f ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200107021633.GB29843@us.ibm.com
2020-01-07 02:50:02 +07:00
printf("psscr = %.16lx\n",
hv ? mfspr(SPRN_PSSCR) : mfspr(SPRN_PSSCR_PR));
powerpc/xmon: Add ISA v3.0 SPRs to SPR dump Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR in ISA 3.0 hypervisor mode. SPRN_PSSCR_PR is the privileged mode access and is used when we are not in hypervisor mode. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:45:09 +07:00
if (!hv)
return;
powerpc/xmon: don't access ASDR in VMs ASDR is HV-privileged and must only be accessed in HV-mode. Fixes a Program Check (0x700) when xmon in a VM dumps SPRs. Fixes: d1e1b351f50f ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200107021633.GB29843@us.ibm.com
2020-01-07 02:50:02 +07:00
printf("ptcr = %.16lx asdr = %.16lx\n",
mfspr(SPRN_PTCR), mfspr(SPRN_ASDR));
powerpc/xmon: Add ISA v3.0 SPRs to SPR dump Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR in ISA 3.0 hypervisor mode. SPRN_PSSCR_PR is the privileged mode access and is used when we are not in hypervisor mode. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:45:09 +07:00
#endif
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
static void dump_one_spr(int spr, bool show_unimplemented)
{
unsigned long val;
val = 0xdeadbeef;
if (!read_spr(spr, &val)) {
printf("SPR 0x%03x (%4d) Faulted during read\n", spr, spr);
return;
}
if (val == 0xdeadbeef) {
/* Looks like read was a nop, confirm */
val = 0x0badcafe;
if (!read_spr(spr, &val)) {
printf("SPR 0x%03x (%4d) Faulted during read\n", spr, spr);
return;
}
if (val == 0x0badcafe) {
if (show_unimplemented)
printf("SPR 0x%03x (%4d) Unimplemented\n", spr, spr);
return;
}
}
printf("SPR 0x%03x (%4d) = 0x%lx\n", spr, spr, val);
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void super_regs(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
powerpc/xmon: Move static regno into its only user Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:27 +07:00
static unsigned long regno;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
int cmd;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
int spr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
cmd = skipbl();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
switch (cmd) {
case '\n': {
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
unsigned long sp, toc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
asm("mr %0,1" : "=r" (sp) :);
asm("mr %0,2" : "=r" (toc) :);
powerpc/xmon: Adjust spacing of existing SPRs to make room for more Purely to make it pleasing to the eye. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:28 +07:00
printf("msr = "REG" sprg0 = "REG"\n",
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
mfmsr(), mfspr(SPRN_SPRG0));
powerpc/xmon: Adjust spacing of existing SPRs to make room for more Purely to make it pleasing to the eye. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:28 +07:00
printf("pvr = "REG" sprg1 = "REG"\n",
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
mfspr(SPRN_PVR), mfspr(SPRN_SPRG1));
powerpc/xmon: Adjust spacing of existing SPRs to make room for more Purely to make it pleasing to the eye. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:28 +07:00
printf("dec = "REG" sprg2 = "REG"\n",
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
mfspr(SPRN_DEC), mfspr(SPRN_SPRG2));
powerpc/xmon: Adjust spacing of existing SPRs to make room for more Purely to make it pleasing to the eye. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:28 +07:00
printf("sp = "REG" sprg3 = "REG"\n", sp, mfspr(SPRN_SPRG3));
printf("toc = "REG" dar = "REG"\n", toc, mfspr(SPRN_DAR));
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
dump_206_sprs();
powerpc/xmon: Dump ISA 2.07 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:30 +07:00
dump_207_sprs();
powerpc/xmon: Add ISA v3.0 SPRs to SPR dump Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR in ISA 3.0 hypervisor mode. SPRN_PSSCR_PR is the privileged mode access and is used when we are not in hypervisor mode. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-30 18:45:09 +07:00
dump_300_sprs();
powerpc/xmon: Dump ISA 2.06 SPRs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 19:54:29 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
case 'w': {
unsigned long val;
scanhex(&regno);
val = 0;
read_spr(regno, &val);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
scanhex(&val);
write_spr(regno, val);
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
dump_one_spr(regno, true);
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case 'r':
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
scanhex(&regno);
dump_one_spr(regno, true);
break;
case 'a':
/* dump ALL SPRs */
for (spr = 1; spr < 1024; ++spr)
dump_one_spr(spr, false);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 18:31:24 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
scannl();
}
/*
* Stuff for reading and writing memory safely
*/
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mread(unsigned long adrs, void *buf, int size)
{
volatile int n;
char *p, *q;
n = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
p = (char *)adrs;
q = (char *)buf;
switch (size) {
case 2:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u16 *)q = *(u16 *)p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case 4:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u32 *)q = *(u32 *)p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case 8:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u64 *)q = *(u64 *)p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
default:
for( ; n < size; ++n) {
*q++ = *p++;
sync();
}
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
n = size;
}
catch_memory_errors = 0;
return n;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mwrite(unsigned long adrs, void *buf, int size)
{
volatile int n;
char *p, *q;
n = 0;
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
return n;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
p = (char *) adrs;
q = (char *) buf;
switch (size) {
case 2:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u16 *)p = *(u16 *)q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case 4:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u32 *)p = *(u32 *)q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case 8:
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
*(u64 *)p = *(u64 *)q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
default:
for ( ; n < size; ++n) {
*p++ = *q++;
sync();
}
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
n = size;
} else {
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("*** Error writing address "REG"\n", adrs + n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
catch_memory_errors = 0;
return n;
}
static int fault_type;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
static int fault_except;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static char *fault_chars[] = { "--", "**", "##" };
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
static int handle_fault(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
fault_except = TRAP(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
switch (TRAP(regs)) {
case 0x200:
fault_type = 0;
break;
case 0x300:
case 0x380:
fault_type = 1;
break;
default:
fault_type = 2;
}
longjmp(bus_error_jmp, 1);
return 0;
}
#define SWAP(a, b, t) ((t) = (a), (a) = (b), (b) = (t))
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
byterev(unsigned char *val, int size)
{
int t;
switch (size) {
case 2:
SWAP(val[0], val[1], t);
break;
case 4:
SWAP(val[0], val[3], t);
SWAP(val[1], val[2], t);
break;
case 8: /* is there really any use for this? */
SWAP(val[0], val[7], t);
SWAP(val[1], val[6], t);
SWAP(val[2], val[5], t);
SWAP(val[3], val[4], t);
break;
}
}
static int brev;
static int mnoread;
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
static char *memex_help_string =
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"Memory examine command usage:\n"
"m [addr] [flags] examine/change memory\n"
" addr is optional. will start where left off.\n"
" flags may include chars from this set:\n"
" b modify by bytes (default)\n"
" w modify by words (2 byte)\n"
" l modify by longs (4 byte)\n"
" d modify by doubleword (8 byte)\n"
" r toggle reverse byte order mode\n"
" n do not read memory (for i/o spaces)\n"
" . ok to read (default)\n"
"NOTE: flags are saved as defaults\n"
"";
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
static char *memex_subcmd_help_string =
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"Memory examine subcommands:\n"
" hexval write this val to current location\n"
" 'string' write chars from string to this location\n"
" ' increment address\n"
" ^ decrement address\n"
" / increment addr by 0x10. //=0x100, ///=0x1000, etc\n"
" \\ decrement addr by 0x10. \\\\=0x100, \\\\\\=0x1000, etc\n"
" ` clear no-read flag\n"
" ; stay at this addr\n"
" v change to byte mode\n"
" w change to word (2 byte) mode\n"
" l change to long (4 byte) mode\n"
" u change to doubleword (8 byte) mode\n"
" m addr change current addr\n"
" n toggle no-read flag\n"
" r toggle byte reverse flag\n"
" < count back up count bytes\n"
" > count skip forward count bytes\n"
" x exit this mode\n"
"";
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memex(void)
{
int cmd, inc, i, nslash;
unsigned long n;
unsigned char val[16];
scanhex((void *)&adrs);
cmd = skipbl();
if (cmd == '?') {
printf(memex_help_string);
return;
} else {
termch = cmd;
}
last_cmd = "m\n";
while ((cmd = skipbl()) != '\n') {
switch( cmd ){
case 'b': size = 1; break;
case 'w': size = 2; break;
case 'l': size = 4; break;
case 'd': size = 8; break;
case 'r': brev = !brev; break;
case 'n': mnoread = 1; break;
case '.': mnoread = 0; break;
}
}
if( size <= 0 )
size = 1;
else if( size > 8 )
size = 8;
for(;;){
if (!mnoread)
n = mread(adrs, val, size);
powerpc: 32-bit fixes for xmon This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 10:30:20 +07:00
printf(REG"%c", adrs, brev? 'r': ' ');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (!mnoread) {
if (brev)
byterev(val, size);
putchar(' ');
for (i = 0; i < n; ++i)
printf("%.2x", val[i]);
for (; i < size; ++i)
printf("%s", fault_chars[fault_type]);
}
putchar(' ');
inc = size;
nslash = 0;
for(;;){
if( scanhex(&n) ){
for (i = 0; i < size; ++i)
val[i] = n >> (i * 8);
if (!brev)
byterev(val, size);
mwrite(adrs, val, size);
inc = size;
}
cmd = skipbl();
if (cmd == '\n')
break;
inc = 0;
switch (cmd) {
case '\'':
for(;;){
n = inchar();
if( n == '\\' )
n = bsesc();
else if( n == '\'' )
break;
for (i = 0; i < size; ++i)
val[i] = n >> (i * 8);
if (!brev)
byterev(val, size);
mwrite(adrs, val, size);
adrs += size;
}
adrs -= size;
inc = size;
break;
case ',':
adrs += size;
break;
case '.':
mnoread = 0;
break;
case ';':
break;
case 'x':
case EOF:
scannl();
return;
case 'b':
case 'v':
size = 1;
break;
case 'w':
size = 2;
break;
case 'l':
size = 4;
break;
case 'u':
size = 8;
break;
case '^':
adrs -= size;
break;
case '/':
if (nslash > 0)
adrs -= 1 << nslash;
else
nslash = 0;
nslash += 4;
adrs += 1 << nslash;
break;
case '\\':
if (nslash < 0)
adrs += 1 << -nslash;
else
nslash = 0;
nslash -= 4;
adrs -= 1 << -nslash;
break;
case 'm':
scanhex((void *)&adrs);
break;
case 'n':
mnoread = 1;
break;
case 'r':
brev = !brev;
break;
case '<':
n = size;
scanhex(&n);
adrs -= n;
break;
case '>':
n = size;
scanhex(&n);
adrs += n;
break;
case '?':
printf(memex_subcmd_help_string);
break;
}
}
adrs += inc;
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bsesc(void)
{
int c;
c = inchar();
switch( c ){
case 'n': c = '\n'; break;
case 'r': c = '\r'; break;
case 'b': c = '\b'; break;
case 't': c = '\t'; break;
}
return c;
}
[PATCH] powerpc: add a raw dump command to xmon Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-09 02:40:28 +07:00
static void xmon_rawdump (unsigned long adrs, long ndump)
{
long n, m, r, nr;
unsigned char temp[16];
for (n = ndump; n > 0;) {
r = n < 16? n: 16;
nr = mread(adrs, temp, r);
adrs += nr;
for (m = 0; m < r; ++m) {
if (m < nr)
printf("%.2x", temp[m]);
else
printf("%s", fault_chars[fault_type]);
}
n -= r;
if (nr < r)
break;
}
printf("\n");
}
powerpc/xmon: Dump ftrace buffers for the current CPU only Current xmon 'dt' command dumps the tracing buffer for all the CPUs, which makes it very hard to read due to the fact that most of powerpc machines currently have many CPUs. Other than that, the CPU lines are interleaved in the ftrace log. This new option just dumps the ftrace buffer for the current CPU. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:05 +07:00
static void dump_tracing(void)
{
int c;
c = inchar();
if (c == 'c')
ftrace_dump(DUMP_ORIG);
else
ftrace_dump(DUMP_ALL);
}
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
#ifdef CONFIG_PPC64
static void dump_one_paca(int cpu)
{
struct paca_struct *p;
powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64 CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-19 11:08:43 +07:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
int i = 0;
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
if (setjmp(bus_error_jmp) != 0) {
printf("*** Error dumping paca for cpu 0x%x!\n", cpu);
return;
}
catch_memory_errors = 1;
sync();
powerpc/64: Use array of paca pointers and allocate pacas individually Change the paca array into an array of pointers to pacas. Allocate pacas individually. This allows flexibility in where the PACAs are allocated. Future work will allocate them node-local. Platforms that don't have address limits on PACAs would be able to defer PACA allocations until later in boot rather than allocate all possible ones up-front then freeing unused. This is slightly more overhead (one additional indirection) for cross CPU paca references, but those aren't too common. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-13 22:08:12 +07:00
p = paca_ptrs[cpu];
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
powerpc/xmon: Don't print hashed pointers in xmon Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 19:23:28 +07:00
printf("paca for cpu 0x%x @ %px:\n", cpu, p);
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
powerpc/xmon: Realign paca dump fields We've added some fields with longer names since we originally wrote this, so the fields are no longer lined up. Adjust the widths to make it all look nice again, eg: 0:mon> dp paca for cpu 0x0 @ c000000001fa0000: possible = yes ... slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500 slb_shadow [1] = 0xd000000008000001 0x400d43642f000510 ... rfi_flush_fallback_area = c0000000fff80000 (0xcc8) ... accounting.starttime_user = 0x51582f07 (0xae8) Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21 18:28:34 +07:00
printf(" %-*s = %s\n", 25, "possible", cpu_possible(cpu) ? "yes" : "no");
printf(" %-*s = %s\n", 25, "present", cpu_present(cpu) ? "yes" : "no");
printf(" %-*s = %s\n", 25, "online", cpu_online(cpu) ? "yes" : "no");
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
#define DUMP(paca, name, format) \
powerpc/xmon: Realign paca dump fields We've added some fields with longer names since we originally wrote this, so the fields are no longer lined up. Adjust the widths to make it all look nice again, eg: 0:mon> dp paca for cpu 0x0 @ c000000001fa0000: possible = yes ... slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500 slb_shadow [1] = 0xd000000008000001 0x400d43642f000510 ... rfi_flush_fallback_area = c0000000fff80000 (0xcc8) ... accounting.starttime_user = 0x51582f07 (0xae8) Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21 18:28:34 +07:00
printf(" %-*s = "format"\t(0x%lx)\n", 25, #name, 18, paca->name, \
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
offsetof(struct paca_struct, name));
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, lock_token, "%#-*x");
DUMP(p, paca_index, "%#-*x");
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, kernel_toc, "%#-*llx");
DUMP(p, kernelbase, "%#-*llx");
DUMP(p, kernel_msr, "%#-*llx");
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, emergency_sp, "%-*px");
powerpc/book3s: Introduce exclusive emergency stack for machine check exception. This patch introduces exclusive emergency stack for machine check exception. We use emergency stack to handle machine check exception so that we can save MCE information (srr1, srr0, dar and dsisr) before turning on ME bit and be ready for re-entrancy. This helps us to prevent clobbering of MCE information in case of nested machine checks. The reason for using emergency stack over normal kernel stack is that the machine check might occur in the middle of setting up a stack frame which may result into improper use of kernel stack. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 21:34:00 +07:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, nmi_emergency_sp, "%-*px");
DUMP(p, mc_emergency_sp, "%-*px");
DUMP(p, in_nmi, "%#-*x");
DUMP(p, in_mce, "%#-*x");
DUMP(p, hmi_event_available, "%#-*x");
powerpc/book3s: Introduce exclusive emergency stack for machine check exception. This patch introduces exclusive emergency stack for machine check exception. We use emergency stack to handle machine check exception so that we can save MCE information (srr1, srr0, dar and dsisr) before turning on ME bit and be ready for re-entrancy. This helps us to prevent clobbering of MCE information in case of nested machine checks. The reason for using emergency stack over normal kernel stack is that the machine check might occur in the middle of setting up a stack frame which may result into improper use of kernel stack. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 21:34:00 +07:00
#endif
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, data_offset, "%#-*llx");
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, hw_cpu_id, "%#-*x");
DUMP(p, cpu_start, "%#-*x");
DUMP(p, kexec_state, "%#-*x");
powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64 CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-19 11:08:43 +07:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc/64s: xmon do not dump hash fields when using radix mode Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:54 +07:00
if (!early_radix_enabled()) {
for (i = 0; i < SLB_NUM_BOLTED; i++) {
u64 esid, vsid;
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
powerpc/64s: xmon do not dump hash fields when using radix mode Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:54 +07:00
if (!p->slb_shadow_ptr)
continue;
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
powerpc/64s: xmon do not dump hash fields when using radix mode Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:54 +07:00
esid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].esid);
vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid);
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
powerpc/64s: xmon do not dump hash fields when using radix mode Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:54 +07:00
if (esid || vsid) {
printf(" %-*s[%d] = 0x%016llx 0x%016llx\n",
22, "slb_shadow", i, esid, vsid);
}
}
DUMP(p, vmalloc_sllp, "%#-*x");
powerpc/64s/hash: Add SLB allocation status bitmaps Add 32-entry bitmaps to track the allocation status of the first 32 SLB entries, and whether they are user or kernel entries. These are used to allocate free SLB entries first, before resorting to the round robin allocator. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:53 +07:00
DUMP(p, stab_rr, "%#-*x");
DUMP(p, slb_used_bitmap, "%#-*x");
DUMP(p, slb_kern_bitmap, "%#-*x");
powerpc/64s: xmon do not dump hash fields when using radix mode Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:54 +07:00
if (!early_cpu_has_feature(CPU_FTR_ARCH_300)) {
DUMP(p, slb_cache_ptr, "%#-*x");
for (i = 0; i < SLB_CACHE_ENTRIES; i++)
printf(" %-*s[%d] = 0x%016x\n",
22, "slb_cache", i, p->slb_cache[i]);
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
}
powerpc/64s/hash: Use POWER9 SLBIA IH=3 variant in switch_slb POWER9 introduces SLBIA IH=3, which invalidates all SLB entries and associated lookaside information that have a class value of 1, which Linux assigns to user addresses. This matches what switch_slb wants, and allows a simple fast implementation that avoids the slb_cache complexity. As a side-effect, the POWER5 < DD2.1 SLB invalidation workaround is also avoided on POWER9. Process context switching rate is improved about 2.2% for a small process that hits the slb cache which is the best case for the current code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-14 22:30:50 +07:00
}
powerpc/xmon: Add RFI flush related fields to paca dump Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 19:49:12 +07:00
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, rfi_flush_fallback_area, "%-*px");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#endif
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, dscr_default, "%#-*llx");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#ifdef CONFIG_PPC_BOOK3E
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, pgd, "%-*px");
DUMP(p, kernel_pgd, "%-*px");
DUMP(p, tcd_ptr, "%-*px");
DUMP(p, mc_kstack, "%-*px");
DUMP(p, crit_kstack, "%-*px");
DUMP(p, dbg_kstack, "%-*px");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#endif
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, __current, "%-*px");
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, kstack, "%#-*llx");
powerpc/xmon: Realign paca dump fields We've added some fields with longer names since we originally wrote this, so the fields are no longer lined up. Adjust the widths to make it all look nice again, eg: 0:mon> dp paca for cpu 0x0 @ c000000001fa0000: possible = yes ... slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500 slb_shadow [1] = 0xd000000008000001 0x400d43642f000510 ... rfi_flush_fallback_area = c0000000fff80000 (0xcc8) ... accounting.starttime_user = 0x51582f07 (0xae8) Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21 18:28:34 +07:00
printf(" %-*s = 0x%016llx\n", 25, "kstack_base", p->kstack & ~(THREAD_SIZE - 1));
powerpc/xmon: Show the stack protector canary in xmon This is helpful for debugging stack protector crashes. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-12 09:58:52 +07:00
#ifdef CONFIG_STACKPROTECTOR
DUMP(p, canary, "%#-*lx");
#endif
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, saved_r1, "%#-*llx");
powerpc/64s/exception: remove bad stack branch The bad stack test in interrupt handlers has a few problems. For performance it is taken in the common case, which is a fetch bubble and a waste of i-cache. For code development and maintainence, it requires yet another stack frame setup routine, and that constrains all exception handlers to follow the same register save pattern which inhibits future optimisation. Remove the test/branch and replace it with a trap. Teach the program check handler to use the emergency stack for this case. This does not result in quite so nice a message, however the SRR0 and SRR1 of the crashed interrupt can be seen in r11 and r12, as is the original r1 (adjusted by INT_FRAME_SIZE). These are the most important parts to debugging the issue. The original r9-12 and cr0 is lost, which is the main downside. kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847! Oops: Exception in kernel mode, sig: 5 [#1] BE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0 REGS: c0000000fffcbd70 TRAP: 0700 Not tainted MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000 CFAR: c000000000009100 IRQMASK: 0 GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166 GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030 GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0 GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167 NIP [c000000000009108] decrementer_common+0x18/0x160 LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0 Call Trace: Instruction dump: 996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000 7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-28 13:33:18 +07:00
#ifdef CONFIG_PPC_BOOK3E
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, trap_save, "%#-*x");
powerpc/64s/exception: remove bad stack branch The bad stack test in interrupt handlers has a few problems. For performance it is taken in the common case, which is a fetch bubble and a waste of i-cache. For code development and maintainence, it requires yet another stack frame setup routine, and that constrains all exception handlers to follow the same register save pattern which inhibits future optimisation. Remove the test/branch and replace it with a trap. Teach the program check handler to use the emergency stack for this case. This does not result in quite so nice a message, however the SRR0 and SRR1 of the crashed interrupt can be seen in r11 and r12, as is the original r1 (adjusted by INT_FRAME_SIZE). These are the most important parts to debugging the issue. The original r9-12 and cr0 is lost, which is the main downside. kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847! Oops: Exception in kernel mode, sig: 5 [#1] BE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0 REGS: c0000000fffcbd70 TRAP: 0700 Not tainted MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000 CFAR: c000000000009100 IRQMASK: 0 GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166 GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030 GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0 GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167 NIP [c000000000009108] decrementer_common+0x18/0x160 LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0 Call Trace: Instruction dump: 996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000 7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-28 13:33:18 +07:00
#endif
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, irq_soft_mask, "%#-*x");
DUMP(p, irq_happened, "%#-*x");
powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code In a bid to kill off explicit mmiowb() usage in driver code, hook up the asm-generic mmiowb() tracking code but provide a definition of arch_mmiowb_state() so that the tracking data can remain in the paca as it does at present This replaces the existing (flawed) implementation. Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-22 21:45:42 +07:00
#ifdef CONFIG_MMIOWB
DUMP(p, mmiowb_state.nesting_count, "%#-*x");
DUMP(p, mmiowb_state.mmiowb_pending, "%#-*x");
#endif
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, irq_work_pending, "%#-*x");
DUMP(p, sprg_vdso, "%#-*llx");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
powerpc/xmon: Specify the full format in DUMP() macro In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-21 18:06:19 +07:00
DUMP(p, tm_scratch, "%#-*llx");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#endif
#ifdef CONFIG_PPC_POWERNV
powerpc/64s: Reimplement book3s idle code in C Reimplement Book3S idle code in C, moving POWER7/8/9 implementation speific HV idle code to the powernv platform code. Book3S assembly stubs are kept in common code and used only to save the stack frame and non-volatile GPRs before executing architected idle instructions, and restoring the stack and reloading GPRs then returning to C after waking from idle. The complex logic dealing with threads and subcores, locking, SPRs, HMIs, timebase resync, etc., is all done in C which makes it more maintainable. This is not a strict translation to C code, there are some significant differences: - Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs, but saves and restores them itself. - The optimisation where EC=ESL=0 idle modes did not have to save GPRs or change MSR is restored, because it's now simple to do. ESL=1 sleeps that do not lose GPRs can use this optimization too. - KVM secondary entry and cede is now more of a call/return style rather than branchy. nap_state_lost is not required because KVM always returns via NVGPR restoring path. - KVM secondary wakeup from offline sequence is moved entirely into the offline wakeup, which avoids a hwsync in the normal idle wakeup path. Performance measured with context switch ping-pong on different threads or cores, is possibly improved a small amount, 1-3% depending on stop state and core vs thread test for shallow states. Deep states it's in the noise compared with other latencies. KVM improvements: - Idle sleepers now always return to caller rather than branch out to KVM first. - This allows optimisations like very fast return to caller when no state has been lost. - KVM no longer requires nap_state_lost because it controls NVGPR save/restore itself on the way in and out. - The heavy idle wakeup KVM request check can be moved out of the normal host idle code and into the not-performance-critical offline code. - KVM nap code now returns from where it is called, which makes the flow a bit easier to follow. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Squash the KVM changes in] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-12 21:30:52 +07:00
DUMP(p, idle_state, "%#-*lx");
if (!early_cpu_has_feature(CPU_FTR_ARCH_300)) {
DUMP(p, thread_idle_state, "%#-*x");
DUMP(p, subcore_sibling_mask, "%#-*x");
} else {
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
DUMP(p, requested_psscr, "%#-*llx");
DUMP(p, dont_stop.counter, "%#-*x");
#endif
}
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 12:58:36 +07:00
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, accounting.utime, "%#-*lx");
DUMP(p, accounting.stime, "%#-*lx");
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 scaled cputime is only meaningfull when the processor has SPURR and/or PURR, which means only on PPC64. Removing it on PPC32 significantly reduces the size of vtime_account_system() and vtime_account_idle() on an 8xx: Before: 00000000 l F .text 000000a8 vtime_delta 00000280 g F .text 0000010c vtime_account_system 0000038c g F .text 00000048 vtime_account_idle After: (vtime_delta gets inlined inside the two functions) 000001d8 g F .text 000000a0 vtime_account_system 00000278 g F .text 00000038 vtime_account_idle In terms of performance, we also get approximatly 7% improvement on task switch. The following small benchmark app is run with perf stat: void *thread(void *arg) { int i; for (i = 0; i < atoi((char*)arg); i++) pthread_yield(); } int main(int argc, char **argv) { pthread_t th1, th2; pthread_create(&th1, NULL, thread, argv[1]); pthread_create(&th2, NULL, thread, argv[1]); pthread_join(th1, NULL); pthread_join(th2, NULL); return 0; } Before the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% ) 200004 context-switches # 0.024 M/sec ( +- 0.00% ) After the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% ) 200004 context-switches # 0.026 M/sec ( +- 0.00% ) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-02 14:53:59 +07:00
#ifdef CONFIG_ARCH_HAS_SCALED_CPUTIME
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, accounting.utime_scaled, "%#-*lx");
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 scaled cputime is only meaningfull when the processor has SPURR and/or PURR, which means only on PPC64. Removing it on PPC32 significantly reduces the size of vtime_account_system() and vtime_account_idle() on an 8xx: Before: 00000000 l F .text 000000a8 vtime_delta 00000280 g F .text 0000010c vtime_account_system 0000038c g F .text 00000048 vtime_account_idle After: (vtime_delta gets inlined inside the two functions) 000001d8 g F .text 000000a0 vtime_account_system 00000278 g F .text 00000038 vtime_account_idle In terms of performance, we also get approximatly 7% improvement on task switch. The following small benchmark app is run with perf stat: void *thread(void *arg) { int i; for (i = 0; i < atoi((char*)arg); i++) pthread_yield(); } int main(int argc, char **argv) { pthread_t th1, th2; pthread_create(&th1, NULL, thread, argv[1]); pthread_create(&th2, NULL, thread, argv[1]); pthread_join(th1, NULL); pthread_join(th2, NULL); return 0; } Before the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% ) 200004 context-switches # 0.024 M/sec ( +- 0.00% ) After the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% ) 200004 context-switches # 0.026 M/sec ( +- 0.00% ) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-02 14:53:59 +07:00
#endif
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, accounting.starttime, "%#-*lx");
DUMP(p, accounting.starttime_user, "%#-*lx");
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 scaled cputime is only meaningfull when the processor has SPURR and/or PURR, which means only on PPC64. Removing it on PPC32 significantly reduces the size of vtime_account_system() and vtime_account_idle() on an 8xx: Before: 00000000 l F .text 000000a8 vtime_delta 00000280 g F .text 0000010c vtime_account_system 0000038c g F .text 00000048 vtime_account_idle After: (vtime_delta gets inlined inside the two functions) 000001d8 g F .text 000000a0 vtime_account_system 00000278 g F .text 00000038 vtime_account_idle In terms of performance, we also get approximatly 7% improvement on task switch. The following small benchmark app is run with perf stat: void *thread(void *arg) { int i; for (i = 0; i < atoi((char*)arg); i++) pthread_yield(); } int main(int argc, char **argv) { pthread_t th1, th2; pthread_create(&th1, NULL, thread, argv[1]); pthread_create(&th2, NULL, thread, argv[1]); pthread_join(th1, NULL); pthread_join(th2, NULL); return 0; } Before the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% ) 200004 context-switches # 0.024 M/sec ( +- 0.00% ) After the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% ) 200004 context-switches # 0.026 M/sec ( +- 0.00% ) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-02 14:53:59 +07:00
#ifdef CONFIG_ARCH_HAS_SCALED_CPUTIME
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, accounting.startspurr, "%#-*lx");
DUMP(p, accounting.utime_sspurr, "%#-*lx");
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 scaled cputime is only meaningfull when the processor has SPURR and/or PURR, which means only on PPC64. Removing it on PPC32 significantly reduces the size of vtime_account_system() and vtime_account_idle() on an 8xx: Before: 00000000 l F .text 000000a8 vtime_delta 00000280 g F .text 0000010c vtime_account_system 0000038c g F .text 00000048 vtime_account_idle After: (vtime_delta gets inlined inside the two functions) 000001d8 g F .text 000000a0 vtime_account_system 00000278 g F .text 00000038 vtime_account_idle In terms of performance, we also get approximatly 7% improvement on task switch. The following small benchmark app is run with perf stat: void *thread(void *arg) { int i; for (i = 0; i < atoi((char*)arg); i++) pthread_yield(); } int main(int argc, char **argv) { pthread_t th1, th2; pthread_create(&th1, NULL, thread, argv[1]); pthread_create(&th2, NULL, thread, argv[1]); pthread_join(th1, NULL); pthread_join(th2, NULL); return 0; } Before the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% ) 200004 context-switches # 0.024 M/sec ( +- 0.00% ) After the patch: Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs): 7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% ) 200004 context-switches # 0.026 M/sec ( +- 0.00% ) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-02 14:53:59 +07:00
#endif
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP(p, accounting.steal_time, "%#-*lx");
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
#undef DUMP
catch_memory_errors = 0;
sync();
}
static void dump_all_pacas(void)
{
int cpu;
if (num_possible_cpus() == 0) {
printf("No possible cpus, use 'dp #' to dump individual cpus\n");
return;
}
for_each_possible_cpu(cpu)
dump_one_paca(cpu);
}
static void dump_pacas(void)
{
unsigned long num;
int c;
c = inchar();
if (c == 'a') {
dump_all_pacas();
return;
}
termch = c; /* Put c back, it wasn't 'a' */
if (scanhex(&num))
dump_one_paca(num);
else
dump_one_paca(xmon_owner);
}
#endif
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
#ifdef CONFIG_PPC_POWERNV
static void dump_one_xive(int cpu)
{
unsigned int hwid = get_hard_smp_processor_id(cpu);
powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in the OPAL logs and also outputs some of the fields of the internal XIVE structures in Linux. The OPAL calls can only be done on baremetal (PowerNV) and they crash a pseries machine. Fix by checking the hypervisor feature of the CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
2019-08-14 22:47:52 +07:00
bool hv = cpu_has_feature(CPU_FTR_HVMODE);
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in the OPAL logs and also outputs some of the fields of the internal XIVE structures in Linux. The OPAL calls can only be done on baremetal (PowerNV) and they crash a pseries machine. Fix by checking the hypervisor feature of the CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
2019-08-14 22:47:52 +07:00
if (hv) {
opal_xive_dump(XIVE_DUMP_TM_HYP, hwid);
opal_xive_dump(XIVE_DUMP_TM_POOL, hwid);
opal_xive_dump(XIVE_DUMP_TM_OS, hwid);
opal_xive_dump(XIVE_DUMP_TM_USER, hwid);
opal_xive_dump(XIVE_DUMP_VP, hwid);
opal_xive_dump(XIVE_DUMP_EMU_STATE, hwid);
}
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
if (setjmp(bus_error_jmp) != 0) {
catch_memory_errors = 0;
printf("*** Error dumping xive on cpu %d\n", cpu);
return;
}
catch_memory_errors = 1;
sync();
xmon_xive_do_dump(cpu);
sync();
__delay(200);
catch_memory_errors = 0;
}
static void dump_all_xives(void)
{
int cpu;
if (num_possible_cpus() == 0) {
printf("No possible cpus, use 'dx #' to dump individual cpus\n");
return;
}
for_each_possible_cpu(cpu)
dump_one_xive(cpu);
}
powerpc/xmon: Improve output of XIVE interrupts When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
2019-09-10 15:18:49 +07:00
static void dump_one_xive_irq(u32 num, struct irq_data *d)
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
{
powerpc/xmon: Improve output of XIVE interrupts When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
2019-09-10 15:18:49 +07:00
xmon_xive_get_irq_config(num, d);
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
}
powerpc/xmon: Add a dump of all XIVE interrupts Modify the xmon 'dxi' command to query all interrupts if no IRQ number is specified. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-4-clg@kaod.org
2019-08-14 22:47:54 +07:00
static void dump_all_xive_irq(void)
{
unsigned int i;
struct irq_desc *desc;
for_each_irq_desc(i, desc) {
struct irq_data *d = irq_desc_get_irq_data(desc);
unsigned int hwirq;
if (!d)
continue;
hwirq = (unsigned int)irqd_to_hwirq(d);
/* IPIs are special (HW number 0) */
if (hwirq)
powerpc/xmon: Improve output of XIVE interrupts When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
2019-09-10 15:18:49 +07:00
dump_one_xive_irq(hwirq, d);
powerpc/xmon: Add a dump of all XIVE interrupts Modify the xmon 'dxi' command to query all interrupts if no IRQ number is specified. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-4-clg@kaod.org
2019-08-14 22:47:54 +07:00
}
}
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
static void dump_xives(void)
{
unsigned long num;
int c;
powerpc/xmon: Check before calling xive functions Currently xmon could call XIVE functions from OPAL even if the XIVE is disabled or does not exist in the system, as in POWER8 machines. This causes the following exception: 1:mon> dx cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450] pc: c00000000009cfa4: opal_xive_dump+0x50/0x68 lr: c0000000000997b8: opal_return+0x0/0x50 This patch simply checks if XIVE is enabled before calling XIVE functions. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-18 01:20:18 +07:00
if (!xive_enabled()) {
printf("Xive disabled on this system\n");
return;
}
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
c = inchar();
if (c == 'a') {
dump_all_xives();
return;
} else if (c == 'i') {
if (scanhex(&num))
powerpc/xmon: Improve output of XIVE interrupts When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
2019-09-10 15:18:49 +07:00
dump_one_xive_irq(num, NULL);
powerpc/xmon: Add a dump of all XIVE interrupts Modify the xmon 'dxi' command to query all interrupts if no IRQ number is specified. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-4-clg@kaod.org
2019-08-14 22:47:54 +07:00
else
dump_all_xive_irq();
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
return;
}
termch = c; /* Put c back, it wasn't 'a' */
if (scanhex(&num))
dump_one_xive(num);
else
dump_one_xive(xmon_owner);
}
#endif /* CONFIG_PPC_POWERNV */
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
static void dump_by_size(unsigned long addr, long count, int size)
{
unsigned char temp[16];
int i, j;
u64 val;
count = ALIGN(count, 16);
for (i = 0; i < count; i += 16, addr += 16) {
printf(REG, addr);
if (mread(addr, temp, 16) != 16) {
printf("\nFaulted reading %d bytes from 0x"REG"\n", 16, addr);
return;
}
for (j = 0; j < 16; j += size) {
putchar(' ');
switch (size) {
case 1: val = temp[j]; break;
case 2: val = *(u16 *)&temp[j]; break;
case 4: val = *(u32 *)&temp[j]; break;
case 8: val = *(u64 *)&temp[j]; break;
default: val = 0;
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("%0*llx", size * 2, val);
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
}
printf("\n");
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dump(void)
{
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
static char last[] = { "d?\n" };
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
int c;
c = inchar();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
#ifdef CONFIG_PPC64
if (c == 'p') {
powerpc/xmon: Paged output for paca display The paca display is already more than 24 lines, which can be problematic if you have an old school 80x24 terminal, or more likely you are on a virtual terminal which does not scroll for whatever reason. This patch adds a new command "#", which takes a single (hex) numeric argument: lines per page. It will cause the output of "dp" and "dpa" to be broken into pages, if necessary. Sample output: 0:mon> # 10 0:mon> dp1 paca for cpu 0x1 @ c00000000fdc0480: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x1 (0xa) kernel_toc = 0xc000000000eb2400 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) emergency_sp = 0xc00000003ffe8000 (0x28) mc_emergency_sp = 0xc00000003ffe4000 (0x2e0) in_mce = 0x0 (0x2e8) data_offset = 0x7f170000 (0x30) hw_cpu_id = 0x8 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) [Hit a key (a:all, q:truncate, any:next page)] 0:mon> __current = 0xc00000007e696620 (0x290) kstack = 0xc00000007e6ebe30 (0x298) stab_rr = 0xb (0x2a0) saved_r1 = 0xc00000007ef37860 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) 0:mon> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Use bool, make some variables static] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:23 +07:00
xmon_start_pagination();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
dump_pacas();
powerpc/xmon: Paged output for paca display The paca display is already more than 24 lines, which can be problematic if you have an old school 80x24 terminal, or more likely you are on a virtual terminal which does not scroll for whatever reason. This patch adds a new command "#", which takes a single (hex) numeric argument: lines per page. It will cause the output of "dp" and "dpa" to be broken into pages, if necessary. Sample output: 0:mon> # 10 0:mon> dp1 paca for cpu 0x1 @ c00000000fdc0480: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x1 (0xa) kernel_toc = 0xc000000000eb2400 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) emergency_sp = 0xc00000003ffe8000 (0x28) mc_emergency_sp = 0xc00000003ffe4000 (0x2e0) in_mce = 0x0 (0x2e8) data_offset = 0x7f170000 (0x30) hw_cpu_id = 0x8 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) [Hit a key (a:all, q:truncate, any:next page)] 0:mon> __current = 0xc00000007e696620 (0x290) kstack = 0xc00000007e6ebe30 (0x298) stab_rr = 0xb (0x2a0) saved_r1 = 0xc00000007ef37860 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) 0:mon> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Use bool, make some variables static] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:23 +07:00
xmon_end_pagination();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
return;
}
#endif
powerpc/xive: Native exploitation of the XIVE interrupt controller The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 14:54:50 +07:00
#ifdef CONFIG_PPC_POWERNV
if (c == 'x') {
xmon_start_pagination();
dump_xives();
xmon_end_pagination();
return;
}
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 06:01:31 +07:00
powerpc/xmon: Dump ftrace buffers for the current CPU only Current xmon 'dt' command dumps the tracing buffer for all the CPUs, which makes it very hard to read due to the fact that most of powerpc machines currently have many CPUs. Other than that, the CPU lines are interleaved in the ftrace log. This new option just dumps the ftrace buffer for the current CPU. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 03:14:05 +07:00
if (c == 't') {
dump_tracing();
return;
}
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
if (c == '\n')
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
termch = c;
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
scanhex((void *)&adrs);
if (termch != '\n')
termch = 0;
if (c == 'i') {
scanhex(&nidump);
if (nidump == 0)
nidump = 16;
else if (nidump > MAX_DUMP)
nidump = MAX_DUMP;
adrs += ppc_inst_dump(adrs, nidump, 1);
last_cmd = "di\n";
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
} else if (c == 'l') {
dump_log_buf();
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
} else if (c == 'o') {
dump_opal_msglog();
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
} else if (c == 'v') {
/* dump virtual to physical translation */
show_pte(adrs);
[PATCH] powerpc: add a raw dump command to xmon Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-09 02:40:28 +07:00
} else if (c == 'r') {
scanhex(&ndump);
if (ndump == 0)
ndump = 64;
xmon_rawdump(adrs, ndump);
adrs += ndump;
last_cmd = "dr\n";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
} else {
scanhex(&ndump);
if (ndump == 0)
ndump = 64;
else if (ndump > MAX_DUMP)
ndump = MAX_DUMP;
powerpc/xmon: Dump memory in CPU endian format Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-07 20:40:44 +07:00
switch (c) {
case '8':
case '4':
case '2':
case '1':
ndump = ALIGN(ndump, 16);
dump_by_size(adrs, ndump, c - '0');
last[1] = c;
last_cmd = last;
break;
default:
prdump(adrs, ndump);
last_cmd = "d\n";
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
adrs += ndump;
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
prdump(unsigned long adrs, long ndump)
{
long n, m, c, r, nr;
unsigned char temp[16];
for (n = ndump; n > 0;) {
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf(REG, adrs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
putchar(' ');
r = n < 16? n: 16;
nr = mread(adrs, temp, r);
adrs += nr;
for (m = 0; m < r; ++m) {
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
if ((m & (sizeof(long) - 1)) == 0 && m > 0)
powerpc: 32-bit fixes for xmon This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 10:30:20 +07:00
putchar(' ');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (m < nr)
printf("%.2x", temp[m]);
else
printf("%s", fault_chars[fault_type]);
}
powerpc: 32-bit fixes for xmon This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 10:30:20 +07:00
for (; m < 16; ++m) {
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
if ((m & (sizeof(long) - 1)) == 0)
powerpc: 32-bit fixes for xmon This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 10:30:20 +07:00
putchar(' ');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(" ");
powerpc: 32-bit fixes for xmon This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 10:30:20 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf(" |");
for (m = 0; m < r; ++m) {
if (m < nr) {
c = temp[m];
putchar(' ' <= c && c <= '~'? c: '.');
} else
putchar(' ');
}
n -= r;
for (; m < 16; ++m)
putchar(' ');
printf("|\n");
if (nr < r)
break;
}
}
[POWERPC] Prepare for spu disassembly in xmon In order to do disassembly of spu binaries in xmon, we need to abstract the disassembly function from ppc_inst_dump. We do this by making the actual disassembly function a function pointer that we pass to ppc_inst_dump(). To save updating all the callers, we turn ppc_inst_dump() into generic_inst_dump() and make ppc_inst_dump() a wrapper which always uses print_insn_powerpc(). Currently we pass the dialect into print_insn_powerpc(), but we always pass 0 - so just make it a local. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:42 +07:00
typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
[POWERPC] Prepare for spu disassembly in xmon In order to do disassembly of spu binaries in xmon, we need to abstract the disassembly function from ppc_inst_dump. We do this by making the actual disassembly function a function pointer that we pass to ppc_inst_dump(). To save updating all the callers, we turn ppc_inst_dump() into generic_inst_dump() and make ppc_inst_dump() a wrapper which always uses print_insn_powerpc(). Currently we pass the dialect into print_insn_powerpc(), but we always pass 0 - so just make it a local. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:42 +07:00
generic_inst_dump(unsigned long adr, long count, int praddr,
instruction_dump_func dump_func)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
int nr, dotted;
unsigned long first_adr;
powerpc/xmon: Fix disassembly since printf changes The recent change to add printf annotations to xmon inadvertently made the disassembly output ugly, eg: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fffffffffae101a0 std r23,416(r1) c00000002001e060 fffffffff8230000 std r1,0(r3) The problem being that negative 32-bit values are being displayed in full 64-bits. The printf conversion was actually correct, we are passing unsigned long so it should use "lx". But powerpc instructions are only 4 bytes and the code only reads 4 bytes, so inst should really just be unsigned int, and that also fixes the printing to look the way we want: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fae101a0 std r23,416(r1) c00000002001e060 f8230000 std r1,0(r3) Fixes: e70d8f55268b ("powerpc/xmon: Add __printf annotation to xmon_printf()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-16 20:52:14 +07:00
unsigned int inst, last_inst = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned char val[4];
dotted = 0;
for (first_adr = adr; count > 0; --count, adr += 4) {
nr = mread(adr, val, 4);
if (nr == 0) {
if (praddr) {
const char *x = fault_chars[fault_type];
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf(REG" %s%s%s%s\n", adr, x, x, x, x);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
break;
}
inst = GETWORD(val);
if (adr > first_adr && inst == last_inst) {
if (!dotted) {
printf(" ...\n");
dotted = 1;
}
continue;
}
dotted = 0;
last_inst = inst;
if (praddr)
powerpc/xmon: Fix disassembly since printf changes The recent change to add printf annotations to xmon inadvertently made the disassembly output ugly, eg: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fffffffffae101a0 std r23,416(r1) c00000002001e060 fffffffff8230000 std r1,0(r3) The problem being that negative 32-bit values are being displayed in full 64-bits. The printf conversion was actually correct, we are passing unsigned long so it should use "lx". But powerpc instructions are only 4 bytes and the code only reads 4 bytes, so inst should really just be unsigned int, and that also fixes the printing to look the way we want: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fae101a0 std r23,416(r1) c00000002001e060 f8230000 std r1,0(r3) Fixes: e70d8f55268b ("powerpc/xmon: Add __printf annotation to xmon_printf()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-16 20:52:14 +07:00
printf(REG" %.8x", adr, inst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("\t");
[POWERPC] Prepare for spu disassembly in xmon In order to do disassembly of spu binaries in xmon, we need to abstract the disassembly function from ppc_inst_dump. We do this by making the actual disassembly function a function pointer that we pass to ppc_inst_dump(). To save updating all the callers, we turn ppc_inst_dump() into generic_inst_dump() and make ppc_inst_dump() a wrapper which always uses print_insn_powerpc(). Currently we pass the dialect into print_insn_powerpc(), but we always pass 0 - so just make it a local. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:42 +07:00
dump_func(inst, adr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
printf("\n");
}
return adr - first_adr;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
[POWERPC] Prepare for spu disassembly in xmon In order to do disassembly of spu binaries in xmon, we need to abstract the disassembly function from ppc_inst_dump. We do this by making the actual disassembly function a function pointer that we pass to ppc_inst_dump(). To save updating all the callers, we turn ppc_inst_dump() into generic_inst_dump() and make ppc_inst_dump() a wrapper which always uses print_insn_powerpc(). Currently we pass the dialect into print_insn_powerpc(), but we always pass 0 - so just make it a local. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:42 +07:00
ppc_inst_dump(unsigned long adr, long count, int praddr)
{
return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
void
print_address(unsigned long addr)
{
xmon_print_symbol(addr, "\t# ", "");
}
powerpc/xmon: Define static functions Currently sparse is complaining about three issues on the xmon code. Two storage classes issues and a dereferencing a 'noderef' pointer. These are the warnings: arch/powerpc/xmon/xmon.c:2783:1: warning: symbol 'dump_log_buf' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2989:6: warning: symbol 'format_pte' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2983:30: warning: dereference of noderef expression This patch fixes all of them, turning both functions static and dereferencing a pointer calling rcu_dereference() instead of a straightforward dereference. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-22 21:54:16 +07:00
static void
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
dump_log_buf(void)
{
powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:12 +07:00
struct kmsg_dumper dumper = { .active = 1 };
unsigned char buf[128];
size_t len;
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
if (setjmp(bus_error_jmp) != 0) {
powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:12 +07:00
printf("Error dumping printk buffer!\n");
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
return;
}
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
catch_memory_errors = 1;
sync();
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:12 +07:00
kmsg_dump_rewind_nolock(&dumper);
powerpc/xmon: Paginate kernel log buffer display The kernel log buffer is often much longer than the size of a terminal so paginate it's output. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:24 +07:00
xmon_start_pagination();
powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:12 +07:00
while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
buf[len] = '\0';
printf("%s", buf);
}
powerpc/xmon: Paginate kernel log buffer display The kernel log buffer is often much longer than the size of a terminal so paginate it's output. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-08 07:50:24 +07:00
xmon_end_pagination();
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 05:09:13 +07:00
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
catch_memory_errors = 0;
powerpc/xmon: Add dl command to dump contents of __log_buf Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 06:13:07 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: add command to dump OPAL msglog Add the 'do' command to dump the OPAL msglog in xmon. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Reduce the amount of ifdefery required] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-09 14:17:49 +07:00
#ifdef CONFIG_PPC_POWERNV
static void dump_opal_msglog(void)
{
unsigned char buf[128];
ssize_t res;
loff_t pos = 0;
if (!firmware_has_feature(FW_FEATURE_OPAL)) {
printf("Machine is not running OPAL firmware.\n");
return;
}
if (setjmp(bus_error_jmp) != 0) {
printf("Error dumping OPAL msglog!\n");
return;
}
catch_memory_errors = 1;
sync();
xmon_start_pagination();
while ((res = opal_msglog_copy(buf, pos, sizeof(buf) - 1))) {
if (res < 0) {
printf("Error dumping OPAL msglog! Error: %zd\n", res);
break;
}
buf[res] = '\0';
printf("%s", buf);
pos += res;
}
xmon_end_pagination();
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
catch_memory_errors = 0;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* Memory operations - move, set, print differences
*/
static unsigned long mdest; /* destination address */
static unsigned long msrc; /* source address */
static unsigned long mval; /* byte value to set memory to */
static unsigned long mcount; /* # bytes to affect */
static unsigned long mdiffs; /* max # differences to print */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memops(int cmd)
{
scanhex((void *)&mdest);
if( termch != '\n' )
termch = 0;
scanhex((void *)(cmd == 's'? &mval: &msrc));
if( termch != '\n' )
termch = 0;
scanhex((void *)&mcount);
switch( cmd ){
case 'm':
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memmove((void *)mdest, (void *)msrc, mcount);
break;
case 's':
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
if (xmon_is_ro) {
printf(xmon_ro_msg);
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memset((void *)mdest, mval, mcount);
break;
case 'd':
if( termch != '\n' )
termch = 0;
scanhex((void *)&mdiffs);
memdiffs((unsigned char *)mdest, (unsigned char *)msrc, mcount, mdiffs);
break;
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
{
unsigned n, prt;
prt = 0;
for( n = nb; n > 0; --n )
if( *p1++ != *p2++ )
if( ++prt <= maxpr )
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("%px %.2x # %px %.2x\n", p1 - 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
p1[-1], p2 - 1, p2[-1]);
if( prt > maxpr )
printf("Total of %d differences\n", prt);
}
static unsigned mend;
static unsigned mask;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memlocate(void)
{
unsigned a, n;
unsigned char val[4];
last_cmd = "ml";
scanhex((void *)&mdest);
if (termch != '\n') {
termch = 0;
scanhex((void *)&mend);
if (termch != '\n') {
termch = 0;
scanhex((void *)&mval);
mask = ~0;
if (termch != '\n') termch = 0;
scanhex((void *)&mask);
}
}
n = 0;
for (a = mdest; a < mend; a += 4) {
if (mread(a, val, 4) == 4
&& ((GETWORD(val) ^ mval) & mask) == 0) {
printf("%.16x: %.16x\n", a, GETWORD(val));
if (++n >= 10)
break;
}
}
}
static unsigned long mskip = 0x1000;
static unsigned long mlim = 0xffffffff;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memzcan(void)
{
unsigned char v;
unsigned a;
int ok, ook;
scanhex(&mdest);
if (termch != '\n') termch = 0;
scanhex(&mskip);
if (termch != '\n') termch = 0;
scanhex(&mlim);
ook = 0;
for (a = mdest; a < mlim; a += mskip) {
ok = mread(a, &v, 1);
if (ok && !ook) {
printf("%.8x .. ", a);
} else if (!ok && ook)
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("%.8lx\n", a - mskip);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
ook = ok;
if (a + mskip < a)
break;
}
if (ook)
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("%.8lx\n", a - mskip);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
static void show_task(struct task_struct *tsk)
{
char state;
/*
* Cloned from kdb_task_state_char(), which is not entirely
* appropriate for calling from xmon. This could be moved
* to a common, generic, routine used by both.
*/
state = (tsk->state == 0) ? 'R' :
(tsk->state < 0) ? 'U' :
(tsk->state & TASK_UNINTERRUPTIBLE) ? 'D' :
(tsk->state & TASK_STOPPED) ? 'T' :
(tsk->state & TASK_TRACED) ? 'C' :
(tsk->exit_state & EXIT_ZOMBIE) ? 'Z' :
(tsk->exit_state & EXIT_DEAD) ? 'E' :
(tsk->state & TASK_INTERRUPTIBLE) ? 'S' : '?';
powerpc/xmon: Don't print hashed pointers in xmon Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 19:23:28 +07:00
printf("%px %016lx %6d %6d %c %2d %s\n", tsk,
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
tsk->thread.ksp,
powerpc/xmon: Define static functions Currently sparse is complaining about three issues on the xmon code. Two storage classes issues and a dereferencing a 'noderef' pointer. These are the warnings: arch/powerpc/xmon/xmon.c:2783:1: warning: symbol 'dump_log_buf' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2989:6: warning: symbol 'format_pte' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2983:30: warning: dereference of noderef expression This patch fixes all of them, turning both functions static and dereferencing a pointer calling rcu_dereference() instead of a straightforward dereference. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-22 21:54:16 +07:00
tsk->pid, rcu_dereference(tsk->parent)->pid,
powerpc: Only use task_struct 'cpu' field on SMP When moving to CONFIG_THREAD_INFO_IN_TASK, the thread_info 'cpu' field gets moved into task_struct and only defined when CONFIG_SMP is set. This patch ensures that TI_CPU is only used when CONFIG_SMP is set and that task_struct 'cpu' field is not used directly out of SMP code. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-31 17:08:50 +07:00
state, task_cpu(tsk),
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
tsk->comm);
}
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc/xmon: Define static functions Currently sparse is complaining about three issues on the xmon code. Two storage classes issues and a dereferencing a 'noderef' pointer. These are the warnings: arch/powerpc/xmon/xmon.c:2783:1: warning: symbol 'dump_log_buf' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2989:6: warning: symbol 'format_pte' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2983:30: warning: dereference of noderef expression This patch fixes all of them, turning both functions static and dereferencing a pointer calling rcu_dereference() instead of a straightforward dereference. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-22 21:54:16 +07:00
static void format_pte(void *ptep, unsigned long pte)
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
{
powerpc/mm: use pte helpers in generic code Get rid of platform specific _PAGE_XXXX in powerpc common code and use helpers instead. mm/dump_linuxpagetables.c will be handled separately Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-09 20:51:56 +07:00
pte_t entry = __pte(pte);
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
printf("ptep @ 0x%016lx = 0x%016lx\n", (unsigned long)ptep, pte);
printf("Maps physical address = 0x%016lx\n", pte & PTE_RPN_MASK);
printf("Flags = %s%s%s%s%s\n",
powerpc/mm: use pte helpers in generic code Get rid of platform specific _PAGE_XXXX in powerpc common code and use helpers instead. mm/dump_linuxpagetables.c will be handled separately Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-09 20:51:56 +07:00
pte_young(entry) ? "Accessed " : "",
pte_dirty(entry) ? "Dirty " : "",
pte_read(entry) ? "Read " : "",
pte_write(entry) ? "Write " : "",
pte_exec(entry) ? "Exec " : "");
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
}
static void show_pte(unsigned long addr)
{
unsigned long tskv = 0;
struct task_struct *tsk = NULL;
struct mm_struct *mm;
pgd_t *pgdp, *pgdir;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
if (!scanhex(&tskv))
mm = &init_mm;
else
tsk = (struct task_struct *)tskv;
if (tsk == NULL)
mm = &init_mm;
else
mm = tsk->active_mm;
if (setjmp(bus_error_jmp) != 0) {
catch_memory_errors = 0;
powerpc/xmon: Don't print hashed pointers in xmon Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 19:23:28 +07:00
printf("*** Error dumping pte for task %px\n", tsk);
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
return;
}
catch_memory_errors = 1;
sync();
if (mm == &init_mm) {
pgdp = pgd_offset_k(addr);
pgdir = pgd_offset_k(0);
} else {
pgdp = pgd_offset(mm, addr);
pgdir = pgd_offset(mm, 0);
}
if (pgd_none(*pgdp)) {
printf("no linux page table for address\n");
return;
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("pgd @ 0x%px\n", pgdir);
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
powerpc/book3s: Use config independent helpers for page table walk Even when we have HugeTLB and THP disabled, kernel linear map can still be mapped with hugepages. This is only an issue with radix translation because hash MMU doesn't map kernel linear range in linux page table and other kernel map areas are not mapped using hugepage. Add config independent helpers and put WARN_ON() when we don't expect things to be mapped via hugepages. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-14 13:03:00 +07:00
if (pgd_is_leaf(*pgdp)) {
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
format_pte(pgdp, pgd_val(*pgdp));
return;
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("pgdp @ 0x%px = 0x%016lx\n", pgdp, pgd_val(*pgdp));
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
pudp = pud_offset(pgdp, addr);
if (pud_none(*pudp)) {
printf("No valid PUD\n");
return;
}
powerpc/book3s: Use config independent helpers for page table walk Even when we have HugeTLB and THP disabled, kernel linear map can still be mapped with hugepages. This is only an issue with radix translation because hash MMU doesn't map kernel linear range in linux page table and other kernel map areas are not mapped using hugepage. Add config independent helpers and put WARN_ON() when we don't expect things to be mapped via hugepages. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-14 13:03:00 +07:00
if (pud_is_leaf(*pudp)) {
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
format_pte(pudp, pud_val(*pudp));
return;
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("pudp @ 0x%px = 0x%016lx\n", pudp, pud_val(*pudp));
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
pmdp = pmd_offset(pudp, addr);
if (pmd_none(*pmdp)) {
printf("No valid PMD\n");
return;
}
powerpc/book3s: Use config independent helpers for page table walk Even when we have HugeTLB and THP disabled, kernel linear map can still be mapped with hugepages. This is only an issue with radix translation because hash MMU doesn't map kernel linear range in linux page table and other kernel map areas are not mapped using hugepage. Add config independent helpers and put WARN_ON() when we don't expect things to be mapped via hugepages. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-14 13:03:00 +07:00
if (pmd_is_leaf(*pmdp)) {
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
format_pte(pmdp, pmd_val(*pmdp));
return;
}
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("pmdp @ 0x%px = 0x%016lx\n", pmdp, pmd_val(*pmdp));
powerpc/xmon: Support dumping software pagetables It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-30 18:01:12 +07:00
ptep = pte_offset_map(pmdp, addr);
if (pte_none(*ptep)) {
printf("no valid PTE\n");
return;
}
format_pte(ptep, pte_val(*ptep));
sync();
__delay(200);
catch_memory_errors = 0;
}
#else
static void show_pte(unsigned long addr)
{
printf("show_pte not yet implemented\n");
}
#endif /* CONFIG_PPC_BOOK3S_64 */
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
static void show_tasks(void)
{
unsigned long tskv;
struct task_struct *tsk = NULL;
printf(" task_struct ->thread.ksp PID PPID S P CMD\n");
if (scanhex(&tskv))
tsk = (struct task_struct *)tskv;
if (setjmp(bus_error_jmp) != 0) {
catch_memory_errors = 0;
powerpc/xmon: Don't print hashed pointers in xmon Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 19:23:28 +07:00
printf("*** Error dumping task %px\n", tsk);
powerpc/xmon: Add xmon command to dump process/task similar to ps(1) Add 'P' command with optional task_struct address to dump all/one task's information: task pointer, kernel stack pointer, PID, PPID, state (interpreted), CPU where (last) running, and command. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-23 22:01:15 +07:00
return;
}
catch_memory_errors = 1;
sync();
if (tsk)
show_task(tsk);
else
for_each_process(tsk)
show_task(tsk);
sync();
__delay(200);
catch_memory_errors = 0;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void proccall(void)
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
{
unsigned long args[8];
unsigned long ret;
int i;
typedef unsigned long (*callfunc_t)(unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
callfunc_t func;
if (!scanhex(&adrs))
return;
if (termch != '\n')
termch = 0;
for (i = 0; i < 8; ++i)
args[i] = 0;
for (i = 0; i < 8; ++i) {
if (!scanhex(&args[i]) || termch == '\n')
break;
termch = 0;
}
func = (callfunc_t) adrs;
ret = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
ret = func(args[0], args[1], args[2], args[3],
args[4], args[5], args[6], args[7]);
sync();
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("return value is 0x%lx\n", ret);
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
} else {
printf("*** %x exception occurred\n", fault_except);
}
catch_memory_errors = 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* Input scanning routines */
int
skipbl(void)
{
int c;
if( termch != 0 ){
c = termch;
termch = 0;
} else
c = inchar();
while( c == ' ' || c == '\t' )
c = inchar();
return c;
}
#define N_PTREGS 44
powerpc/xmon: use match_string() helper match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-31 18:11:25 +07:00
static const char *regnames[N_PTREGS] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
"pc", "msr", "or3", "ctr", "lr", "xer", "ccr",
#ifdef CONFIG_PPC64
"softe",
#else
"mq",
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
"trap", "dar", "dsisr", "res"
};
int
scanhex(unsigned long *vp)
{
int c, d;
unsigned long v;
c = skipbl();
if (c == '%') {
/* parse register name */
char regname[8];
int i;
for (i = 0; i < sizeof(regname) - 1; ++i) {
c = inchar();
if (!isalnum(c)) {
termch = c;
break;
}
regname[i] = c;
}
regname[i] = 0;
powerpc/xmon: use match_string() helper match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-31 18:11:25 +07:00
i = match_string(regnames, N_PTREGS, regname);
if (i < 0) {
printf("invalid register name '%%%s'\n", regname);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc/xmon: use match_string() helper match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-31 18:11:25 +07:00
if (xmon_regs == NULL) {
printf("regs not available\n");
return 0;
}
*vp = ((unsigned long *)xmon_regs)[i];
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/* skip leading "0x" if any */
if (c == '0') {
c = inchar();
if (c == 'x') {
c = inchar();
} else {
d = hexdigit(c);
if (d == EOF) {
termch = c;
*vp = 0;
return 1;
}
}
} else if (c == '$') {
int i;
for (i=0; i<63; i++) {
c = inchar();
powerpc/xmon: use isspace/isxdigit/isalnum from linux/ctype.h isxdigit() macro definition is the same. isalnum() from linux/ctype.h will accept additional latin non-ASCII characters. This is harmless since this macro is used in scanhex() which parses user input. isspace() from linux/ctype.h will accept vertical tab and form feed but not NULL. The use of this macro is modified to accept NULL as well. Additional characters are harmless since this macro is also only used in scanhex(). Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-07-15 18:43:47 +07:00
if (isspace(c) || c == '\0') {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
termch = c;
break;
}
tmpstr[i] = c;
}
tmpstr[i++] = 0;
[PATCH] ppc32: Kill embedded system.map, use kallsyms This patch kills the whole embedded System.map mecanism and the bootloader-passed System.map that was used to provide symbol resolution in xmon. Instead, xmon now uses kallsyms like ppc64 does. No hurry getting that in Linus tree, let it be tested in -mm for a while first and make sure it doesn't break various embedded configs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 07:15:30 +07:00
*vp = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
*vp = kallsyms_lookup_name(tmpstr);
sync();
}
catch_memory_errors = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (!(*vp)) {
printf("unknown symbol '%s'\n", tmpstr);
return 0;
}
return 1;
}
d = hexdigit(c);
if (d == EOF) {
termch = c;
return 0;
}
v = 0;
do {
v = (v << 4) + d;
c = inchar();
d = hexdigit(c);
} while (d != EOF);
termch = c;
*vp = v;
return 1;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
scannl(void)
{
int c;
c = termch;
termch = 0;
while( c != '\n' )
c = inchar();
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int hexdigit(int c)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
if( '0' <= c && c <= '9' )
return c - '0';
if( 'A' <= c && c <= 'F' )
return c - ('A' - 10);
if( 'a' <= c && c <= 'f' )
return c - ('a' - 10);
return EOF;
}
void
getstring(char *s, int size)
{
int c;
c = skipbl();
do {
if( size > 1 ){
*s++ = c;
--size;
}
c = inchar();
} while( c != ' ' && c != '\t' && c != '\n' );
termch = c;
*s = 0;
}
static char line[256];
static char *lineptr;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
flush_input(void)
{
lineptr = NULL;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
inchar(void)
{
if (lineptr == NULL || *lineptr == 0) {
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
if (xmon_gets(line, sizeof(line)) == NULL) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
lineptr = NULL;
return EOF;
}
lineptr = line;
}
return *lineptr++;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
take_input(char *str)
{
lineptr = str;
}
static void
symbol_lookup(void)
{
int type = inchar();
powerpc/xmon: Add address lookup for percpu symbols Currently, in xmon, there is no obvious way to get an address for a percpu symbol for a particular cpu. Having such an ability would be good for debugging the system when percpu variables got involved. Therefore, this patch introduces a new xmon command "lp" to lookup the address for percpu symbols. Usage of "lp" is similar to "ls", except that we could add a cpu number to choose the variable of which cpu we want to lookup. If no cpu number is given, lookup for current cpu. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 16:20:09 +07:00
unsigned long addr, cpu;
void __percpu *ptr = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static char tmp[64];
switch (type) {
case 'a':
if (scanhex(&addr))
xmon_print_symbol(addr, ": ", "\n");
termch = 0;
break;
case 's':
getstring(tmp, 64);
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
addr = kallsyms_lookup_name(tmp);
if (addr)
printf("%s: %lx\n", tmp, addr);
else
printf("Symbol '%s' not found.\n", tmp);
sync();
}
powerpc/xmon: Add address lookup for percpu symbols Currently, in xmon, there is no obvious way to get an address for a percpu symbol for a particular cpu. Having such an ability would be good for debugging the system when percpu variables got involved. Therefore, this patch introduces a new xmon command "lp" to lookup the address for percpu symbols. Usage of "lp" is similar to "ls", except that we could add a cpu number to choose the variable of which cpu we want to lookup. If no cpu number is given, lookup for current cpu. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 16:20:09 +07:00
catch_memory_errors = 0;
termch = 0;
break;
case 'p':
getstring(tmp, 64);
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
ptr = (void __percpu *)kallsyms_lookup_name(tmp);
sync();
}
if (ptr &&
ptr >= (void __percpu *)__per_cpu_start &&
ptr < (void __percpu *)__per_cpu_end)
{
if (scanhex(&cpu) && cpu < num_possible_cpus()) {
addr = (unsigned long)per_cpu_ptr(ptr, cpu);
} else {
cpu = raw_smp_processor_id();
addr = (unsigned long)this_cpu_ptr(ptr);
}
printf("%s for cpu 0x%lx: %lx\n", tmp, cpu, addr);
} else {
printf("Percpu symbol '%s' not found.\n", tmp);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
catch_memory_errors = 0;
termch = 0;
break;
}
}
/* Print an address in numeric and symbolic form (if possible) */
static void xmon_print_symbol(unsigned long address, const char *mid,
const char *after)
{
char *modname;
const char *name = NULL;
unsigned long offset, size;
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf(REG, address);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
name = kallsyms_lookup(address, &size, &offset, &modname,
tmpstr);
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
}
catch_memory_errors = 0;
if (name) {
printf("%s%s+%#lx/%#lx", mid, name, offset, size);
if (modname)
printf(" [%s]", modname);
}
printf("%s", after);
}
powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64 CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-19 11:08:43 +07:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc: Remove MMU_FTR_SLB We now only support cpus that use an SLB, so we don't need an MMU feature to indicate that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-10 09:29:20 +07:00
void dump_segments(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
int i;
powerpc/xmon: Drop the valid variable completely in dump_segments() The value of 'valid' is always zero when 'esid' is zero, and if 'esid' is non-zero then the value of 'valid' is irrelevant because we are using logical or in the if expression. In fact 'valid' can be dropped completely from dump_segments() by simply doing the check with SLB_ESID_V directly in the if. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-07-29 14:10:04 +07:00
unsigned long esid,vsid;
[POWERPC] Update xmon slb code This adds a bit more detail to the xmon SLB output. When the valid bit is set, this displays the ESID and VSID values, as well as decoding the segment size -- 1T or 256M -- and displaying the LLP bits. This supresses the output for any slb entries that contain only zeros. sample output from power6 (1T segment support): 00 c000000008000000 40004f7ca3000500 1T ESID= c00000 VSID= 4f7ca3 LLP:100 01 d000000008000000 4000eb71b0000400 1T ESID= d00000 VSID= eb71b0 LLP: 0 08 0000000018000000 0000c8499f8ccc80 256M ESID= 1 VSID= c8499f8cc LLP: 0 09 00000000f8000000 0000d2c1a8e46c80 256M ESID= f VSID= d2c1a8e46 LLP: 0 10 0000000048000000 0000ca87eab1dc80 256M ESID= 4 VSID= ca87eab1d LLP: 0 43 cf00000008000000 400011b260000500 1T ESID= cf0000 VSID= 11b260 LLP:100 sample output from power5 (notice the non-valid but non-zero entries) 10 0000000008000000 00004fd0e077ac80 256M ESID= 0 VSID= 4fd0e077a LLP: 0 11 00000000f8000000 00005b085830fc80 256M ESID= f VSID= 5b085830f LLP: 0 12 0000000048000000 000052ce99fe6c80 256M ESID= 4 VSID= 52ce99fe6 LLP: 0 13 0000000018000000 000050904ed95c80 256M ESID= 1 VSID= 50904ed95 LLP: 0 14 cf00000008000000 0000d59aca40f500 256M ESID=cf0000000 VSID= d59aca40f LLP:100 15 c000000078000000 000045cb97751500 256M ESID=c00000007 VSID= 45cb97751 LLP:100 Tested on power5 and power6. Signed-Off-By: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-07 04:22:23 +07:00
unsigned long llp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
powerpc/xmon: Fix up xmon format strings There are a couple of places where xmon is using %x to print values that are unsigned long. I found this out the hard way recently: 0:mon> p c000000000d0e7c8 c00000033dc90000 00000000a0000089 c000000000000000 return value is 0x96300500 Which is calling find_linux_pte_or_hugepte(), the result should be a kernel pointer. After decoding the page tables by hand I discovered the correct value was c000000396300500. So fix up that case and a few others. We also use a mix of 0x%x, %x and %u to print cpu numbers. So standardise on 0x%x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-26 18:02:14 +07:00
printf("SLB contents of cpu 0x%x\n", smp_processor_id());
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[POWERPC] Use SLB size from the device tree Currently we hardwire the number of SLBs to 64, but PAPR says we should use the ibm,slb-size property to obtain the number of SLB entries. This uses this property instead of assuming 64. If no property is found, we assume 64 entries as before. This soft patches the SLB handler, so it shouldn't change performance at all. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 13:24:48 +07:00
for (i = 0; i < mmu_slb_size; i++) {
[POWERPC] Update xmon slb code This adds a bit more detail to the xmon SLB output. When the valid bit is set, this displays the ESID and VSID values, as well as decoding the segment size -- 1T or 256M -- and displaying the LLP bits. This supresses the output for any slb entries that contain only zeros. sample output from power6 (1T segment support): 00 c000000008000000 40004f7ca3000500 1T ESID= c00000 VSID= 4f7ca3 LLP:100 01 d000000008000000 4000eb71b0000400 1T ESID= d00000 VSID= eb71b0 LLP: 0 08 0000000018000000 0000c8499f8ccc80 256M ESID= 1 VSID= c8499f8cc LLP: 0 09 00000000f8000000 0000d2c1a8e46c80 256M ESID= f VSID= d2c1a8e46 LLP: 0 10 0000000048000000 0000ca87eab1dc80 256M ESID= 4 VSID= ca87eab1d LLP: 0 43 cf00000008000000 400011b260000500 1T ESID= cf0000 VSID= 11b260 LLP:100 sample output from power5 (notice the non-valid but non-zero entries) 10 0000000008000000 00004fd0e077ac80 256M ESID= 0 VSID= 4fd0e077a LLP: 0 11 00000000f8000000 00005b085830fc80 256M ESID= f VSID= 5b085830f LLP: 0 12 0000000048000000 000052ce99fe6c80 256M ESID= 4 VSID= 52ce99fe6 LLP: 0 13 0000000018000000 000050904ed95c80 256M ESID= 1 VSID= 50904ed95 LLP: 0 14 cf00000008000000 0000d59aca40f500 256M ESID=cf0000000 VSID= d59aca40f LLP:100 15 c000000078000000 000045cb97751500 256M ESID=c00000007 VSID= 45cb97751 LLP:100 Tested on power5 and power6. Signed-Off-By: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-07 04:22:23 +07:00
asm volatile("slbmfee %0,%1" : "=r" (esid) : "r" (i));
asm volatile("slbmfev %0,%1" : "=r" (vsid) : "r" (i));
powerpc/xmon: Deindent the SLB dumping logic Currently the code that dumps SLB entries uses a double-nested if. This means the actual dumping logic is a bit squashed. Deindent it by using continue. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-24 07:35:14 +07:00
if (!esid && !vsid)
continue;
printf("%02d %016lx %016lx", i, esid, vsid);
if (!(esid & SLB_ESID_V)) {
printf("\n");
continue;
}
llp = vsid & SLB_VSID_LLP;
if (vsid & SLB_VSID_B_1T) {
printf(" 1T ESID=%9lx VSID=%13lx LLP:%3lx \n",
GET_ESID_1T(esid),
(vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT_1T,
llp);
} else {
printf(" 256M ESID=%9lx VSID=%13lx LLP:%3lx \n",
GET_ESID(esid),
(vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT,
llp);
[POWERPC] Update xmon slb code This adds a bit more detail to the xmon SLB output. When the valid bit is set, this displays the ESID and VSID values, as well as decoding the segment size -- 1T or 256M -- and displaying the LLP bits. This supresses the output for any slb entries that contain only zeros. sample output from power6 (1T segment support): 00 c000000008000000 40004f7ca3000500 1T ESID= c00000 VSID= 4f7ca3 LLP:100 01 d000000008000000 4000eb71b0000400 1T ESID= d00000 VSID= eb71b0 LLP: 0 08 0000000018000000 0000c8499f8ccc80 256M ESID= 1 VSID= c8499f8cc LLP: 0 09 00000000f8000000 0000d2c1a8e46c80 256M ESID= f VSID= d2c1a8e46 LLP: 0 10 0000000048000000 0000ca87eab1dc80 256M ESID= 4 VSID= ca87eab1d LLP: 0 43 cf00000008000000 400011b260000500 1T ESID= cf0000 VSID= 11b260 LLP:100 sample output from power5 (notice the non-valid but non-zero entries) 10 0000000008000000 00004fd0e077ac80 256M ESID= 0 VSID= 4fd0e077a LLP: 0 11 00000000f8000000 00005b085830fc80 256M ESID= f VSID= 5b085830f LLP: 0 12 0000000048000000 000052ce99fe6c80 256M ESID= 4 VSID= 52ce99fe6 LLP: 0 13 0000000018000000 000050904ed95c80 256M ESID= 1 VSID= 50904ed95 LLP: 0 14 cf00000008000000 0000d59aca40f500 256M ESID=cf0000000 VSID= d59aca40f LLP:100 15 c000000078000000 000045cb97751500 256M ESID=c00000007 VSID= 45cb97751 LLP:100 Tested on power5 and power6. Signed-Off-By: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-07 04:22:23 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
}
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
#endif
powerpc: change CONFIG_PPC_STD_MMU_32 to CONFIG_PPC_BOOK3S_32 Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config PPC_STD_MMU def_bool y depends on PPC_BOOK3S config PPC_STD_MMU_32 def_bool y depends on PPC_STD_MMU && PPC32 PPC_STD_MMU_32 is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_PPC_STD_MMU_32 in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-17 17:25:02 +07:00
#ifdef CONFIG_PPC_BOOK3S_32
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
void dump_segments(void)
{
int i;
printf("sr0-15 =");
for (i = 0; i < 16; ++i)
powerpc/xmon: fix dump_segments() mfsrin() takes segment num from bits 31-28 (IBM bits 0-3). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Clarify bit numbering] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-17 00:31:08 +07:00
printf(" %x", mfsrin(i << 28));
powerpc: Merge xmon The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 19:53:37 +07:00
printf("\n");
}
#endif
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
#ifdef CONFIG_44x
static void dump_tlb_44x(void)
{
int i;
for (i = 0; i < PPC44x_TLB_SIZE; i++) {
unsigned long w0,w1,w2;
asm volatile("tlbre %0,%1,0" : "=r" (w0) : "r" (i));
asm volatile("tlbre %0,%1,1" : "=r" (w1) : "r" (i));
asm volatile("tlbre %0,%1,2" : "=r" (w2) : "r" (i));
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("[%02x] %08lx %08lx %08lx ", i, w0, w1, w2);
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
if (w0 & PPC44x_TLB_VALID) {
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("V %08lx -> %01lx%08lx %c%c%c%c%c",
[POWERPC] Add xmon function to dump 44x TLB This adds a function to xmon to dump the content of the 44x processor TLB with a little bit of decoding (but not much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-16 14:23:33 +07:00
w0 & PPC44x_TLB_EPN_MASK,
w1 & PPC44x_TLB_ERPN_MASK,
w1 & PPC44x_TLB_RPN_MASK,
(w2 & PPC44x_TLB_W) ? 'W' : 'w',
(w2 & PPC44x_TLB_I) ? 'I' : 'i',
(w2 & PPC44x_TLB_M) ? 'M' : 'm',
(w2 & PPC44x_TLB_G) ? 'G' : 'g',
(w2 & PPC44x_TLB_E) ? 'E' : 'e');
}
printf("\n");
}
}
#endif /* CONFIG_44x */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
powerpc/book3e: Add TLB dump in xmon for Book3E Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09 12:34:50 +07:00
#ifdef CONFIG_PPC_BOOK3E
static void dump_tlb_book3e(void)
{
u32 mmucfg, pidmask, lpidmask;
u64 ramask;
int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0;
int mmu_version;
static const char *pgsz_names[] = {
" 1K",
" 2K",
" 4K",
" 8K",
" 16K",
" 32K",
" 64K",
"128K",
"256K",
"512K",
" 1M",
" 2M",
" 4M",
" 8M",
" 16M",
" 32M",
" 64M",
"128M",
"256M",
"512M",
" 1G",
" 2G",
" 4G",
" 8G",
" 16G",
" 32G",
" 64G",
"128G",
"256G",
"512G",
" 1T",
" 2T",
};
/* Gather some infos about the MMU */
mmucfg = mfspr(SPRN_MMUCFG);
mmu_version = (mmucfg & 3) + 1;
ntlbs = ((mmucfg >> 2) & 3) + 1;
pidsz = ((mmucfg >> 6) & 0x1f) + 1;
lpidsz = (mmucfg >> 24) & 0xf;
rasz = (mmucfg >> 16) & 0x7f;
if ((mmu_version > 1) && (mmucfg & 0x10000))
lrat = 1;
printf("Book3E MMU MAV=%d.0,%d TLBs,%d-bit PID,%d-bit LPID,%d-bit RA\n",
mmu_version, ntlbs, pidsz, lpidsz, rasz);
pidmask = (1ul << pidsz) - 1;
lpidmask = (1ul << lpidsz) - 1;
ramask = (1ull << rasz) - 1;
for (tlb = 0; tlb < ntlbs; tlb++) {
u32 tlbcfg;
int nent, assoc, new_cc = 1;
printf("TLB %d:\n------\n", tlb);
switch(tlb) {
case 0:
tlbcfg = mfspr(SPRN_TLB0CFG);
break;
case 1:
tlbcfg = mfspr(SPRN_TLB1CFG);
break;
case 2:
tlbcfg = mfspr(SPRN_TLB2CFG);
break;
case 3:
tlbcfg = mfspr(SPRN_TLB3CFG);
break;
default:
printf("Unsupported TLB number !\n");
continue;
}
nent = tlbcfg & 0xfff;
assoc = (tlbcfg >> 24) & 0xff;
for (i = 0; i < nent; i++) {
u32 mas0 = MAS0_TLBSEL(tlb);
u32 mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K);
u64 mas2 = 0;
u64 mas7_mas3;
int esel = i, cc = i;
if (assoc != 0) {
cc = i / assoc;
esel = i % assoc;
mas2 = cc * 0x1000;
}
mas0 |= MAS0_ESEL(esel);
mtspr(SPRN_MAS0, mas0);
mtspr(SPRN_MAS1, mas1);
mtspr(SPRN_MAS2, mas2);
asm volatile("tlbre 0,0,0" : : : "memory");
mas1 = mfspr(SPRN_MAS1);
mas2 = mfspr(SPRN_MAS2);
mas7_mas3 = mfspr(SPRN_MAS7_MAS3);
if (assoc && (i % assoc) == 0)
new_cc = 1;
if (!(mas1 & MAS1_VALID))
continue;
if (assoc == 0)
printf("%04x- ", i);
else if (new_cc)
printf("%04x-%c", cc, 'A' + esel);
else
printf(" |%c", 'A' + esel);
new_cc = 0;
printf(" %016llx %04x %s %c%c AS%c",
mas2 & ~0x3ffull,
(mas1 >> 16) & 0x3fff,
pgsz_names[(mas1 >> 7) & 0x1f],
mas1 & MAS1_IND ? 'I' : ' ',
mas1 & MAS1_IPROT ? 'P' : ' ',
mas1 & MAS1_TS ? '1' : '0');
printf(" %c%c%c%c%c%c%c",
mas2 & MAS2_X0 ? 'a' : ' ',
mas2 & MAS2_X1 ? 'v' : ' ',
mas2 & MAS2_W ? 'w' : ' ',
mas2 & MAS2_I ? 'i' : ' ',
mas2 & MAS2_M ? 'm' : ' ',
mas2 & MAS2_G ? 'g' : ' ',
mas2 & MAS2_E ? 'e' : ' ');
printf(" %016llx", mas7_mas3 & ramask & ~0x7ffull);
if (mas1 & MAS1_IND)
printf(" %s\n",
pgsz_names[(mas7_mas3 >> 1) & 0x1f]);
else
printf(" U%c%c%c S%c%c%c\n",
mas7_mas3 & MAS3_UX ? 'x' : ' ',
mas7_mas3 & MAS3_UW ? 'w' : ' ',
mas7_mas3 & MAS3_UR ? 'r' : ' ',
mas7_mas3 & MAS3_SX ? 'x' : ' ',
mas7_mas3 & MAS3_SW ? 'w' : ' ',
mas7_mas3 & MAS3_SR ? 'r' : ' ');
}
}
}
#endif /* CONFIG_PPC_BOOK3E */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 11:27:16 +07:00
static void xmon_init(int enable)
[PATCH] ppc64: allow xmon=off If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config, there is no way to disable xmon again. setup_system calls first xmon_init, later parse_early_param. So a new 'xmon=off' cmdline option will do the right thing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-05 00:26:42 +07:00
{
if (enable) {
__debugger = xmon;
__debugger_ipi = xmon_ipi;
__debugger_bpt = xmon_bpt;
__debugger_sstep = xmon_sstep;
__debugger_iabr_match = xmon_iabr_match;
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
__debugger_break_match = xmon_break_match;
[PATCH] ppc64: allow xmon=off If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config, there is no way to disable xmon again. setup_system calls first xmon_init, later parse_early_param. So a new 'xmon=off' cmdline option will do the right thing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-05 00:26:42 +07:00
__debugger_fault_handler = xmon_fault_handler;
powerpc/xmon: Fix invocation inside lock region Currently xmon needs to get devtree_lock (through rtas_token()) during its invocation (at crash time). If there is a crash while devtree_lock is being held, then xmon tries to get the lock but spins forever and never get into the interactive debugger, as in the following case: int *ptr = NULL; raw_spin_lock_irqsave(&devtree_lock, flags); *ptr = 0xdeadbeef; This patch avoids calling rtas_token(), thus trying to get the same lock, at crash time. This new mechanism proposes getting the token at initialization time (xmon_init()) and just consuming it at crash time. This would allow xmon to be possible invoked independent of devtree_lock being held or not. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-09 00:12:42 +07:00
#ifdef CONFIG_PPC_PSERIES
/*
* Get the token here to avoid trying to get a lock
* during the crash, causing a deadlock.
*/
set_indicator_token = rtas_token("set-indicator");
#endif
[PATCH] ppc64: allow xmon=off If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config, there is no way to disable xmon again. setup_system calls first xmon_init, later parse_early_param. So a new 'xmon=off' cmdline option will do the right thing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-05 00:26:42 +07:00
} else {
__debugger = NULL;
__debugger_ipi = NULL;
__debugger_bpt = NULL;
__debugger_sstep = NULL;
__debugger_iabr_match = NULL;
powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers This is a rewrite so that we don't assume we are using the DABR throughout the code. We now use the arch_hw_breakpoint to store the breakpoint in a generic manner in the thread_struct, rather than storing the raw DABR value. The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from userspace. We keep this functionality, so that future changes (like the POWER8 DAWR), will still fake the DABR to userspace. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-20 21:06:44 +07:00
__debugger_break_match = NULL;
[PATCH] ppc64: allow xmon=off If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config, there is no way to disable xmon again. setup_system calls first xmon_init, later parse_early_param. So a new 'xmon=off' cmdline option will do the right thing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-05 00:26:42 +07:00
__debugger_fault_handler = NULL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
#ifdef CONFIG_MAGIC_SYSRQ
Input: sysrq - drop tty argument from sysrq ops handlers Noone is using tty argument so let's get rid of it. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-18 11:15:46 +07:00
static void sysrq_handle_xmon(int key)
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
{
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (xmon_is_locked_down()) {
clear_all_bpt();
xmon_init(0);
return;
}
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
/* ensure xmon is enabled */
xmon_init(1);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
debugger(get_irq_regs());
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
if (!xmon_on)
xmon_init(0);
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
}
Input: sysrq - drop tty argument from sysrq ops handlers Noone is using tty argument so let's get rid of it. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-18 11:15:46 +07:00
static struct sysrq_key_op sysrq_xmon_op = {
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
.handler = sysrq_handle_xmon,
powerpc/xmon/sysrq: fix inconstistent help message of sysrq key Currently help message of /proc/sysrq-trigger highlight its upper-case characters, like below: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) ... this would confuse user trigger sysrq by upper-case character, which is inconsistent with the real lower-case character registed key. This inconsistent help message will also lead more confused when 26 upper-case letters put into use in future. This patch fix powerpc xmon sysrq key: "xmon(x)" Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 05:28:54 +07:00
.help_msg = "xmon(x)",
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
.action_msg = "Entering xmon",
};
static int __init setup_xmon_sysrq(void)
{
register_sysrq_key('x', &sysrq_xmon_op);
return 0;
}
powerpc/xmon: drop the nobt option from xmon plus minor fixes The xmon parameter nobt was added long time ago, by commit 26c8af5f01df ("[POWERPC] print backtrace when entering xmon"). The problem that time was that during a crash in a machine with USB keyboard, xmon wouldn't respond to commands from the keyboard, so printing the backtrace wouldn't be possible. Idea then was to show automatically the backtrace on xmon crash for the first time it's invoked (if it recovers, next time xmon won't show backtrace automatically). The nobt parameter was added _only_ to prevent this automatic trace show. Seems long time ago USB keyboards didn't work that well! We don't need this parameter anymore, the feature of auto showing the backtrace is interesting (imagine a case of auto-reboot script), so this patch extends the functionality, by always showing the backtrace automatically when xmon is invoked; it removes the nobt parameter too. Also, this patch fixes __initdata placement on xmon_early and replaces __initcall() with modern device_initcall() on sysrq handler. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:50 +07:00
device_initcall(setup_xmon_sysrq);
powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 18:55:08 +07:00
#endif /* CONFIG_MAGIC_SYSRQ */
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
powerpc/xmon: Clear all breakpoints when xmon is disabled via debugfs Presently when xmon is disabled by debugfs any existing instruction/data-access breakpoints set are not disabled. This may lead to kernel oops when those breakpoints are hit as the necessary debugger hooks aren't installed. Hence this patch introduces a new function named clear_all_bpt() which is called when xmon is disabled via debugfs. The function will unpatch/clear all the trap and ciabr/dab based breakpoints. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Fix build break when CONFIG_DEBUG_FS=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:31:32 +07:00
static void clear_all_bpt(void)
{
int i;
/* clear/unpatch all breakpoints */
remove_bpts();
remove_cpu_bpts();
/* Disable all breakpoints */
for (i = 0; i < NBPTS; ++i)
bpts[i].enabled = 0;
/* Clear any data or iabr breakpoints */
if (iabr || dabr.enabled) {
iabr = NULL;
dabr.enabled = 0;
}
}
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
#ifdef CONFIG_DEBUG_FS
powerpc/xmon: add debugfs entry for xmon Currently the xmon debugger is set only via kernel boot command-line. It's disabled by default, and can be enabled with "xmon=on" on the command-line. Also, xmon may be accessed via sysrq mechanism. But we cannot enable/disable xmon in runtime, it needs kernel reload. This patch introduces a debugfs entry for xmon, allowing user to query its current state and change it if desired. Basically, the "xmon" file to read from/write to is under the debugfs mount point, on powerpc directory. It's a simple attribute, value 0 meaning xmon is disabled and value 1 the opposite. Writing these states to the file will take immediate effect in the debugger. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:51 +07:00
static int xmon_dbgfs_set(void *data, u64 val)
{
xmon_on = !!val;
xmon_init(xmon_on);
powerpc/xmon: Clear all breakpoints when xmon is disabled via debugfs Presently when xmon is disabled by debugfs any existing instruction/data-access breakpoints set are not disabled. This may lead to kernel oops when those breakpoints are hit as the necessary debugger hooks aren't installed. Hence this patch introduces a new function named clear_all_bpt() which is called when xmon is disabled via debugfs. The function will unpatch/clear all the trap and ciabr/dab based breakpoints. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Fix build break when CONFIG_DEBUG_FS=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:31:32 +07:00
/* make sure all breakpoints removed when disabling */
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (!xmon_on) {
powerpc/xmon: Clear all breakpoints when xmon is disabled via debugfs Presently when xmon is disabled by debugfs any existing instruction/data-access breakpoints set are not disabled. This may lead to kernel oops when those breakpoints are hit as the necessary debugger hooks aren't installed. Hence this patch introduces a new function named clear_all_bpt() which is called when xmon is disabled via debugfs. The function will unpatch/clear all the trap and ciabr/dab based breakpoints. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Fix build break when CONFIG_DEBUG_FS=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-05 00:31:32 +07:00
clear_all_bpt();
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
get_output_lock();
printf("xmon: All breakpoints cleared\n");
release_output_lock();
}
powerpc/xmon: add debugfs entry for xmon Currently the xmon debugger is set only via kernel boot command-line. It's disabled by default, and can be enabled with "xmon=on" on the command-line. Also, xmon may be accessed via sysrq mechanism. But we cannot enable/disable xmon in runtime, it needs kernel reload. This patch introduces a debugfs entry for xmon, allowing user to query its current state and change it if desired. Basically, the "xmon" file to read from/write to is under the debugfs mount point, on powerpc directory. It's a simple attribute, value 0 meaning xmon is disabled and value 1 the opposite. Writing these states to the file will take immediate effect in the debugger. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:51 +07:00
return 0;
}
static int xmon_dbgfs_get(void *data, u64 *val)
{
*val = xmon_on;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(xmon_dbgfs_ops, xmon_dbgfs_get,
xmon_dbgfs_set, "%llu\n");
static int __init setup_xmon_dbgfs(void)
{
debugfs_create_file("xmon", 0600, powerpc_debugfs_root, NULL,
&xmon_dbgfs_ops);
return 0;
}
device_initcall(setup_xmon_dbgfs);
#endif /* CONFIG_DEBUG_FS */
powerpc/xmon: drop the nobt option from xmon plus minor fixes The xmon parameter nobt was added long time ago, by commit 26c8af5f01df ("[POWERPC] print backtrace when entering xmon"). The problem that time was that during a crash in a machine with USB keyboard, xmon wouldn't respond to commands from the keyboard, so printing the backtrace wouldn't be possible. Idea then was to show automatically the backtrace on xmon crash for the first time it's invoked (if it recovers, next time xmon won't show backtrace automatically). The nobt parameter was added _only_ to prevent this automatic trace show. Seems long time ago USB keyboards didn't work that well! We don't need this parameter anymore, the feature of auto showing the backtrace is interesting (imagine a case of auto-reboot script), so this patch extends the functionality, by always showing the backtrace automatically when xmon is invoked; it removes the nobt parameter too. Also, this patch fixes __initdata placement on xmon_early and replaces __initcall() with modern device_initcall() on sysrq handler. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:50 +07:00
static int xmon_early __initdata;
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
static int __init early_parse_xmon(char *p)
{
powerpc/xmon: Restrict when kernel is locked down Xmon should be either fully or partially disabled depending on the kernel lockdown state. Put xmon into read-only mode for lockdown=integrity and prevent user entry into xmon when lockdown=confidentiality. Xmon checks the lockdown state on every attempted entry: (1) during early xmon'ing (2) when triggered via sysrq (3) when toggled via debugfs (4) when triggered via a previously enabled breakpoint The following lockdown state transitions are handled: (1) lockdown=none -> lockdown=integrity set xmon read-only mode (2) lockdown=none -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon (3) lockdown=integrity -> lockdown=confidentiality clear all breakpoints, set xmon read-only mode, prevent user re-entry into xmon Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-09-07 13:11:24 +07:00
if (xmon_is_locked_down()) {
xmon_init(0);
xmon_early = 0;
xmon_on = 0;
} else if (!p || strncmp(p, "early", 5) == 0) {
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
/* just "xmon" is equivalent to "xmon=early" */
xmon_init(1);
xmon_early = 1;
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
xmon_on = 1;
} else if (strncmp(p, "on", 2) == 0) {
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
xmon_init(1);
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
xmon_on = 1;
powerpc/xmon: add read-only mode Operations which write to memory and special purpose registers should be restricted on systems with integrity guarantees (such as Secure Boot) and, optionally, to avoid self-destructive behaviors. Add a config option, XMON_DEFAULT_RO_MODE, to set default xmon behavior. The kernel cmdline options xmon=ro and xmon=rw override this default. The following xmon operations are affected: memops: disable memmove disable memset disable memzcan memex: no-op'd mwrite super_regs: no-op'd write_spr bpt_cmds: disable proc_call: disable Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-16 10:26:38 +07:00
} else if (strncmp(p, "rw", 2) == 0) {
xmon_init(1);
xmon_on = 1;
xmon_is_ro = false;
} else if (strncmp(p, "ro", 2) == 0) {
xmon_init(1);
xmon_on = 1;
xmon_is_ro = true;
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
} else if (strncmp(p, "off", 3) == 0)
xmon_on = 0;
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
else
return 1;
return 0;
}
early_param("xmon", early_parse_xmon);
void __init xmon_setup(void)
{
powerpc/xmon: Fix an unexpected xmon on/off state change Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 02:27:49 +07:00
if (xmon_on)
[POWERPC] Fix xmon=off and cleanup xmon initialisation My patch to make the early xmon logic work with earlier early param parsing (480f6f35a149802a94ad5c1a2673ed6ec8d2c158) breaks xmon=off. No one does this obviously as xmon rocks, but it should really work as documented. While fixing that it struck me that we could move the xmon param handling into xmon.c, and also consolidate the xmon_init()/do_early_xmon logic into xmon_setup(). This means xmon=early drops into xmon a little earlier on 32-bit, but it seems to work just fine. Tested on PSERIES and CLASSIC32. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 11:12:08 +07:00
xmon_init(1);
if (xmon_early)
debugger(NULL);
}
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
[POWERPC] cell: fix building without spufs It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-28 01:18:55 +07:00
#ifdef CONFIG_SPU_BASE
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
struct spu_info {
struct spu *spu;
u64 saved_mfc_sr1_RW;
u32 saved_spu_runcntl_RW;
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
unsigned long dump_addr;
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
u8 stopped_ok;
};
#define XMON_NUM_SPUS 16 /* Enough for current hardware */
static struct spu_info spu_info[XMON_NUM_SPUS];
void xmon_register_spus(struct list_head *list)
{
struct spu *spu;
list_for_each_entry(spu, list, full_list) {
if (spu->number >= XMON_NUM_SPUS) {
WARN_ON(1);
continue;
}
spu_info[spu->number].spu = spu;
spu_info[spu->number].stopped_ok = 0;
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
spu_info[spu->number].dump_addr = (unsigned long)
spu_info[spu->number].spu->local_store;
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
}
}
static void stop_spus(void)
{
struct spu *spu;
int i;
u64 tmp;
for (i = 0; i < XMON_NUM_SPUS; i++) {
if (!spu_info[i].spu)
continue;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
spu = spu_info[i].spu;
spu_info[i].saved_spu_runcntl_RW =
in_be32(&spu->problem->spu_runcntl_RW);
tmp = spu_mfc_sr1_get(spu);
spu_info[i].saved_mfc_sr1_RW = tmp;
tmp &= ~MFC_STATE1_MASTER_RUN_CONTROL_MASK;
spu_mfc_sr1_set(spu, tmp);
sync();
__delay(200);
spu_info[i].stopped_ok = 1;
[POWERPC] Show state of spus as theyre stopped in Cell xmon helper After stopping spus in xmon I often find myself trawling through the field dumps to find out which spus were running. The spu stopping code actually knows what's running, so let's print it out to save the user some futzing. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:40 +07:00
printf("Stopped spu %.2d (was %s)\n", i,
spu_info[i].saved_spu_runcntl_RW ?
"running" : "stopped");
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
} else {
catch_memory_errors = 0;
printf("*** Error stopping spu %.2d\n", i);
}
catch_memory_errors = 0;
}
}
static void restart_spus(void)
{
struct spu *spu;
int i;
for (i = 0; i < XMON_NUM_SPUS; i++) {
if (!spu_info[i].spu)
continue;
if (!spu_info[i].stopped_ok) {
printf("*** Error, spu %d was not successfully stopped"
", not restarting\n", i);
continue;
}
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
spu = spu_info[i].spu;
spu_mfc_sr1_set(spu, spu_info[i].saved_mfc_sr1_RW);
out_be32(&spu->problem->spu_runcntl_RW,
spu_info[i].saved_spu_runcntl_RW);
sync();
__delay(200);
printf("Restarted spu %.2d\n", i);
} else {
catch_memory_errors = 0;
printf("*** Error restarting spu %.2d\n", i);
}
catch_memory_errors = 0;
}
}
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
#define DUMP_WIDTH 23
[POWERPC] Fix sparse warning in xmon Cell code My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer. I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:39 +07:00
#define DUMP_VALUE(format, field, value) \
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
do { \
if (setjmp(bus_error_jmp) == 0) { \
catch_memory_errors = 1; \
sync(); \
printf(" %-*s = "format"\n", DUMP_WIDTH, \
[POWERPC] Fix sparse warning in xmon Cell code My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer. I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:39 +07:00
#field, value); \
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
sync(); \
__delay(200); \
} else { \
catch_memory_errors = 0; \
printf(" %-*s = *** Error reading field.\n", \
DUMP_WIDTH, #field); \
} \
catch_memory_errors = 0; \
} while (0)
[POWERPC] Fix sparse warning in xmon Cell code My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer. I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:39 +07:00
#define DUMP_FIELD(obj, format, field) \
DUMP_VALUE(format, field, obj->field)
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
static void dump_spu_fields(struct spu *spu)
{
printf("Dumping spu fields at address %p:\n", spu);
DUMP_FIELD(spu, "0x%x", number);
DUMP_FIELD(spu, "%s", name);
DUMP_FIELD(spu, "0x%lx", local_store_phys);
DUMP_FIELD(spu, "0x%p", local_store);
DUMP_FIELD(spu, "0x%lx", ls_size);
DUMP_FIELD(spu, "0x%x", node);
DUMP_FIELD(spu, "0x%lx", flags);
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP_FIELD(spu, "%llu", class_0_pending);
DUMP_FIELD(spu, "0x%llx", class_0_dar);
DUMP_FIELD(spu, "0x%llx", class_1_dar);
DUMP_FIELD(spu, "0x%llx", class_1_dsisr);
DUMP_FIELD(spu, "0x%x", irqs[0]);
DUMP_FIELD(spu, "0x%x", irqs[1]);
DUMP_FIELD(spu, "0x%x", irqs[2]);
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
DUMP_FIELD(spu, "0x%x", slb_replace);
DUMP_FIELD(spu, "%d", pid);
DUMP_FIELD(spu, "0x%p", mm);
DUMP_FIELD(spu, "0x%p", ctx);
DUMP_FIELD(spu, "0x%p", rq);
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
DUMP_FIELD(spu, "0x%llx", timestamp);
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
DUMP_FIELD(spu, "0x%lx", problem_phys);
DUMP_FIELD(spu, "0x%p", problem);
[POWERPC] Fix sparse warning in xmon Cell code My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer. I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:39 +07:00
DUMP_VALUE("0x%x", problem->spu_runcntl_RW,
in_be32(&spu->problem->spu_runcntl_RW));
DUMP_VALUE("0x%x", problem->spu_status_R,
in_be32(&spu->problem->spu_status_R));
DUMP_VALUE("0x%x", problem->spu_npc_RW,
in_be32(&spu->problem->spu_npc_RW));
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
DUMP_FIELD(spu, "0x%p", priv2);
[POWERPC] cell: spu management xmon routines This fixes the xmon support for the cell spu to be compatable with the split spu platform code. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:50 +07:00
DUMP_FIELD(spu, "0x%p", pdata);
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
}
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
int
spu_inst_dump(unsigned long adr, long count, int praddr)
{
return generic_inst_dump(adr, count, praddr, print_insn_spu);
}
static void dump_spu_ls(unsigned long num, int subcmd)
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
{
unsigned long offset, addr, ls_addr;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
ls_addr = (unsigned long)spu_info[num].spu->local_store;
sync();
__delay(200);
} else {
catch_memory_errors = 0;
powerpc/xmon: Add __printf annotation to xmon_printf() This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Always use px not p, fixup the 44x specific code, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-25 16:06:47 +07:00
printf("*** Error: accessing spu info for spu %ld\n", num);
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
return;
}
catch_memory_errors = 0;
if (scanhex(&offset))
addr = ls_addr + offset;
else
addr = spu_info[num].dump_addr;
if (addr >= ls_addr + LS_SIZE) {
printf("*** Error: address outside of local store\n");
return;
}
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
switch (subcmd) {
case 'i':
addr += spu_inst_dump(addr, 16, 1);
last_cmd = "sdi\n";
break;
default:
prdump(addr, 64);
addr += 64;
last_cmd = "sd\n";
break;
}
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
spu_info[num].dump_addr = addr;
}
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
static int do_spu_cmd(void)
{
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
static unsigned long num = 0;
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
int cmd, subcmd = 0;
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
cmd = inchar();
switch (cmd) {
case 's':
stop_spus();
break;
case 'r':
restart_spus();
break;
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
case 'd':
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
subcmd = inchar();
if (isxdigit(subcmd) || subcmd == '\n')
termch = subcmd;
powerpc: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings, but because we build arch/powerpc with -Werror, they became errors. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-29 05:28:30 +07:00
/* fall through */
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
case 'f':
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
scanhex(&num);
if (num >= XMON_NUM_SPUS || !spu_info[num].spu) {
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
printf("*** Error: invalid spu number\n");
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
return 0;
}
switch (cmd) {
case 'f':
dump_spu_fields(spu_info[num].spu);
break;
default:
[POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:44 +07:00
dump_spu_ls(num, subcmd);
[POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 06:46:41 +07:00
break;
}
[POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:28 +07:00
break;
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
default:
return -1;
}
return 0;
}
[POWERPC] cell: fix building without spufs It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-28 01:18:55 +07:00
#else /* ! CONFIG_SPU_BASE */
[POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 23:31:27 +07:00
static int do_spu_cmd(void)
{
return -1;
}
#endif
Reference in New Issue Copy Permalink