AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0286f3ea26
linux_dsm_epyc7002/arch/arm64/boot/dts/allwinner/Makefile

13 lines
543 B
Makefile
Raw Normal View History

arm64: allwinner: add BananaPi-M64 support The Banana Pi M64 board is a typical single board computer based on the Allwinner A64 SoC. Aside from the usual peripherals it features eMMC storage, which is connected to the 8-bit capable SDHC2 controller. Also it has a soldered WiFi/Bluetooth chip, so we enable UART1 and SDHC1 as those two interfaces are connected to it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-01-10 08:22:33 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-12 16:53:13 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-19 17:36:39 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
arm64: allwinner: a64: add device tree for SoPine with baseboard Pine64 have made an official baseboard when SoPine SoM is out. The official baseboard is like the original Pine64 -- but with SD card slot replaced with Pine64's eMMC module slot. Add a device tree for SoPine with the baseboard. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-04 09:43:45 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
arm64: allwinner: h5: add support for the Orange Pi PC 2 board The Orange Pi PC 2 is a typical single board computer using the Allwinner H5 SoC. Apart from the usual suspects it features three separately driven USB ports and a Gigabit Ethernet port. Also it has a SPI NOR flash soldered, from which the board can boot from. This enables the SBC to behave like a "real computer" with built-in firmware. Add the board specific .dts file, which includes the H5 .dtsi and enables the peripherals that we support so far. Reviewed-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio, change MMC cd to active-low, rename some node names to prevent underscores] Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-07 00:17:50 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
arm64: allwinner: h5: add support for Orange Pi Prime board Orange Pi Prime is a new Allwinner H5-based SBC by Xunlong. It's like a Orange Pi Plus 2E with H3 replaced with H5, eMMC replaced with onboard SPI NOR Flash and wireless card changed to Realtek RTL8723BS (with Bluetooth functionality). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-13 23:38:07 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-12 16:53:14 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
arm64: allwinner: h5: add support for NanoPi NEO2 board NanoPi NEO2 is a board with the same size factor with the original NanoPi NEO by FriendlyELEC. It has a H5 instead of H3 on NanoPi NEO, and the ethernet is upgraded to 1Gbps (with external RTL8211E PHY). Add support for this board. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-17 18:15:41 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-19 17:36:39 +07:00
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
Reference in New Issue Copy Permalink