AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
e729549990
linux_dsm_epyc7002/arch/arm64/boot/dts/allwinner/Makefile

8 lines
254 B
Makefile
Raw Normal View History

arm64: allwinner: add BananaPi-M64 support The Banana Pi M64 board is a typical single board computer based on the Allwinner A64 SoC. Aside from the usual peripherals it features eMMC storage, which is connected to the 8-bit capable SDHC2 controller. Also it has a soldered WiFi/Bluetooth chip, so we enable UART1 and SDHC1 as those two interfaces are connected to it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-01-10 08:22:33 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-19 17:36:39 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
arm64: allwinner: h5: add support for the Orange Pi PC 2 board The Orange Pi PC 2 is a typical single board computer using the Allwinner H5 SoC. Apart from the usual suspects it features three separately driven USB ports and a Gigabit Ethernet port. Also it has a SPI NOR flash soldered, from which the board can boot from. This enables the SBC to behave like a "real computer" with built-in firmware. Add the board specific .dts file, which includes the H5 .dtsi and enables the peripherals that we support so far. Reviewed-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio, change MMC cd to active-low, rename some node names to prevent underscores] Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-07 00:17:50 +07:00
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-19 17:36:39 +07:00
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
Reference in New Issue Copy Permalink