ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
|
#include "tegra124.dtsi"
|
|
|
|
|
|
2015-03-12 21:48:01 +07:00
|
|
|
#include "tegra124-jetson-tk1-emc.dtsi"
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
/ {
|
|
|
|
|
model = "NVIDIA Tegra124 Jetson TK1";
|
|
|
|
|
compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
|
|
|
|
|
|
|
|
|
|
aliases {
|
2016-06-30 05:21:37 +07:00
|
|
|
rtc0 = "/i2c@7000d000/pmic@40";
|
|
|
|
|
rtc1 = "/rtc@7000e000";
|
2016-01-26 23:59:18 +07:00
|
|
|
|
|
|
|
|
/* This order keeps the mapping DB9 connector <-> ttyS0 */
|
2014-11-12 03:49:30 +07:00
|
|
|
serial0 = &uartd;
|
2016-01-26 23:59:18 +07:00
|
|
|
serial1 = &uarta;
|
|
|
|
|
serial2 = &uartb;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
|
2016-02-09 20:51:59 +07:00
|
|
|
chosen {
|
|
|
|
|
stdout-path = "serial0:115200n8";
|
|
|
|
|
};
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
memory {
|
|
|
|
|
reg = <0x0 0x80000000 0x0 0x80000000>;
|
|
|
|
|
};
|
|
|
|
|
|
2017-03-22 09:03:06 +07:00
|
|
|
pcie@1003000 {
|
2014-09-17 23:02:45 +07:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
avddio-pex-supply = <&vdd_1v05_run>;
|
|
|
|
|
dvddio-pex-supply = <&vdd_1v05_run>;
|
|
|
|
|
avdd-pex-pll-supply = <&vdd_1v05_run>;
|
|
|
|
|
hvdd-pex-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
avdd-pll-erefe-supply = <&avdd_1v05_run>;
|
|
|
|
|
|
2015-11-12 00:22:27 +07:00
|
|
|
/* Mini PCIe */
|
2014-09-17 23:02:45 +07:00
|
|
|
pci@1,0 {
|
2016-06-30 05:21:37 +07:00
|
|
|
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
|
2015-11-12 00:22:27 +07:00
|
|
|
phy-names = "pcie-0";
|
2014-09-17 23:02:45 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2015-11-12 00:22:27 +07:00
|
|
|
/* Gigabit Ethernet */
|
2014-09-17 23:02:45 +07:00
|
|
|
pci@2,0 {
|
2016-06-30 05:21:37 +07:00
|
|
|
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
|
2015-11-12 00:22:27 +07:00
|
|
|
phy-names = "pcie-0";
|
2014-09-17 23:02:45 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
host1x@50000000 {
|
|
|
|
|
hdmi@54280000 {
|
2014-04-25 22:44:47 +07:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
hdmi-supply = <&vdd_5v0_hdmi>;
|
|
|
|
|
pll-supply = <&vdd_hdmi_pll>;
|
|
|
|
|
vdd-supply = <&vdd_3v3_hdmi>;
|
|
|
|
|
|
|
|
|
|
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
|
|
|
|
nvidia,hpd-gpio =
|
|
|
|
|
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2015-07-01 16:13:47 +07:00
|
|
|
gpu@0,57000000 {
|
|
|
|
|
/*
|
|
|
|
|
* Node left disabled on purpose - the bootloader will enable
|
|
|
|
|
* it after having set the VPR up
|
|
|
|
|
*/
|
|
|
|
|
vdd-supply = <&vdd_gpu>;
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
pinmux: pinmux@70000868 {
|
ARM: tegra: rely on bootloader pinmux programming on Tegra124
The defined mechanism for programming the Tegra pinmux is to perform all
of the following at once in order, before using any I/O controller that
is affected by the pinmux:
- Set the CLAMP_INPUTS_WHEN_TRISTATED PMC register bit.
- Set up any GPIO pins to their "initial" state.
- Program all pinmux settings in one go.
Other methods such as:
- Not setting CLAMP_INPUTS_WHEN_TRISTATED.
- Not setting GPIOs to their "initial" state before programming the
pinmux settings of the related pin, in particular the mux function.
- Not programming the entire pinmux at once, in order to avoid
possible conflicting settings.
... are not qualified or supported by NVIDIA ASIC/syseng. They could
cause glitches or undesired output levels on some pins, or controller
malfunction.
While we've been getting away with doing something different on many
Tegra boards without issue, I believe we've just been getting lucky.
I'd like to switch all Tegra124 systems to the correct scheme now so
they provide the right example to follow, and require that any new
boards we support upstream work in the same fashion.
While it would be nice to update boards containing older SoCs for
consistency, I don't anticipate doing so. It's too much churn to change
at this time. At least with all Tegra124 boards converted, the most
recent boards provide the correct example.
Since the bootloader needs to reprogram the pinmux to access certain
peripherals, it must program the entire pinmux due to the supported
rules above. As such, there is no need to program any part of the pinmux
from the kernel, unless dynamic pinmuxing is used. Given this, we couuld
simply remove the pinmux "default" state from the DT entirely. However,
some bootloaders parse the DT to perform their initial pinmux setup, so
it's useful to keep the pinmux data in DT. To allow this while avoiding
redundant work in the kernel, rename the "default" state to "boot". The
kernel won't apply this, but bootloaders can still look for this state
name and apply it. Note however that the DT provides zero information
about the required initial GPIO setup, so bootloaders using this approach
are not likely to operate correctly without an additional GPIO
initialization table somewhere. Previous discussions on the DT mailing
list have rejected adding such a table to DT...
The following U-Boot commits fully initialize the pinmux:
Jetson TK1: 4ff213b8e478 ARM: tegra: clamp inputs on Jetson TK1
Venice2: 3365479ce78a ARM: tegra: Venice2 pinmux spreadsheet updates
Both are part of U-Boot v2014.07 and later.
Without those commits, the only fallout I see from this change is that
HDMI on Venice2 no longer works. Given the very small user-base of this
platform, I feel that requiring a bootloader update is reasonable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-03 22:42:06 +07:00
|
|
|
pinctrl-names = "boot";
|
|
|
|
|
pinctrl-0 = <&state_boot>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
|
ARM: tegra: rely on bootloader pinmux programming on Tegra124
The defined mechanism for programming the Tegra pinmux is to perform all
of the following at once in order, before using any I/O controller that
is affected by the pinmux:
- Set the CLAMP_INPUTS_WHEN_TRISTATED PMC register bit.
- Set up any GPIO pins to their "initial" state.
- Program all pinmux settings in one go.
Other methods such as:
- Not setting CLAMP_INPUTS_WHEN_TRISTATED.
- Not setting GPIOs to their "initial" state before programming the
pinmux settings of the related pin, in particular the mux function.
- Not programming the entire pinmux at once, in order to avoid
possible conflicting settings.
... are not qualified or supported by NVIDIA ASIC/syseng. They could
cause glitches or undesired output levels on some pins, or controller
malfunction.
While we've been getting away with doing something different on many
Tegra boards without issue, I believe we've just been getting lucky.
I'd like to switch all Tegra124 systems to the correct scheme now so
they provide the right example to follow, and require that any new
boards we support upstream work in the same fashion.
While it would be nice to update boards containing older SoCs for
consistency, I don't anticipate doing so. It's too much churn to change
at this time. At least with all Tegra124 boards converted, the most
recent boards provide the correct example.
Since the bootloader needs to reprogram the pinmux to access certain
peripherals, it must program the entire pinmux due to the supported
rules above. As such, there is no need to program any part of the pinmux
from the kernel, unless dynamic pinmuxing is used. Given this, we couuld
simply remove the pinmux "default" state from the DT entirely. However,
some bootloaders parse the DT to perform their initial pinmux setup, so
it's useful to keep the pinmux data in DT. To allow this while avoiding
redundant work in the kernel, rename the "default" state to "boot". The
kernel won't apply this, but bootloaders can still look for this state
name and apply it. Note however that the DT provides zero information
about the required initial GPIO setup, so bootloaders using this approach
are not likely to operate correctly without an additional GPIO
initialization table somewhere. Previous discussions on the DT mailing
list have rejected adding such a table to DT...
The following U-Boot commits fully initialize the pinmux:
Jetson TK1: 4ff213b8e478 ARM: tegra: clamp inputs on Jetson TK1
Venice2: 3365479ce78a ARM: tegra: Venice2 pinmux spreadsheet updates
Both are part of U-Boot v2014.07 and later.
Without those commits, the only fallout I see from this change is that
HDMI on Venice2 no longer works. Given the very small user-base of this
platform, I feel that requiring a bootloader update is reasonable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-03 22:42:06 +07:00
|
|
|
state_boot: pinmux {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
clk_32k_out_pa0 {
|
|
|
|
|
nvidia,pins = "clk_32k_out_pa0";
|
|
|
|
|
nvidia,function = "soc";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart3_cts_n_pa1 {
|
|
|
|
|
nvidia,pins = "uart3_cts_n_pa1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "gmi";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap2_fs_pa2 {
|
|
|
|
|
nvidia,pins = "dap2_fs_pa2";
|
|
|
|
|
nvidia,function = "i2s1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap2_sclk_pa3 {
|
|
|
|
|
nvidia,pins = "dap2_sclk_pa3";
|
|
|
|
|
nvidia,function = "i2s1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap2_din_pa4 {
|
|
|
|
|
nvidia,pins = "dap2_din_pa4";
|
|
|
|
|
nvidia,function = "i2s1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap2_dout_pa5 {
|
|
|
|
|
nvidia,pins = "dap2_dout_pa5";
|
|
|
|
|
nvidia,function = "i2s1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc3_clk_pa6 {
|
|
|
|
|
nvidia,pins = "sdmmc3_clk_pa6";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc3_cmd_pa7 {
|
|
|
|
|
nvidia,pins = "sdmmc3_cmd_pa7";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pb0 {
|
|
|
|
|
nvidia,pins = "pb0";
|
|
|
|
|
nvidia,function = "uartd";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pb1 {
|
|
|
|
|
nvidia,pins = "pb1";
|
|
|
|
|
nvidia,function = "uartd";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_dat3_pb4 {
|
|
|
|
|
nvidia,pins = "sdmmc3_dat3_pb4";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_dat2_pb5 {
|
|
|
|
|
nvidia,pins = "sdmmc3_dat2_pb5";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_dat1_pb6 {
|
|
|
|
|
nvidia,pins = "sdmmc3_dat1_pb6";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_dat0_pb7 {
|
|
|
|
|
nvidia,pins = "sdmmc3_dat0_pb7";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart3_rts_n_pc0 {
|
|
|
|
|
nvidia,pins = "uart3_rts_n_pc0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "gmi";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart2_txd_pc2 {
|
|
|
|
|
nvidia,pins = "uart2_txd_pc2";
|
|
|
|
|
nvidia,function = "irda";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart2_rxd_pc3 {
|
|
|
|
|
nvidia,pins = "uart2_rxd_pc3";
|
|
|
|
|
nvidia,function = "irda";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
gen1_i2c_scl_pc4 {
|
|
|
|
|
nvidia,pins = "gen1_i2c_scl_pc4";
|
|
|
|
|
nvidia,function = "i2c1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
gen1_i2c_sda_pc5 {
|
|
|
|
|
nvidia,pins = "gen1_i2c_sda_pc5";
|
|
|
|
|
nvidia,function = "i2c1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pc7 {
|
|
|
|
|
nvidia,pins = "pc7";
|
|
|
|
|
nvidia,function = "rsvd1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pg0 {
|
|
|
|
|
nvidia,pins = "pg0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pg1 {
|
|
|
|
|
nvidia,pins = "pg1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pg2 {
|
|
|
|
|
nvidia,pins = "pg2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pg3 {
|
|
|
|
|
nvidia,pins = "pg3";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pg4 {
|
|
|
|
|
nvidia,pins = "pg4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pg5 {
|
|
|
|
|
nvidia,pins = "pg5";
|
|
|
|
|
nvidia,function = "spi4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pg6 {
|
|
|
|
|
nvidia,pins = "pg6";
|
|
|
|
|
nvidia,function = "spi4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pg7 {
|
|
|
|
|
nvidia,pins = "pg7";
|
|
|
|
|
nvidia,function = "spi4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph0 {
|
|
|
|
|
nvidia,pins = "ph0";
|
|
|
|
|
nvidia,function = "gmi";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph1 {
|
|
|
|
|
nvidia,pins = "ph1";
|
|
|
|
|
nvidia,function = "pwm1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph2 {
|
|
|
|
|
nvidia,pins = "ph2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph3 {
|
|
|
|
|
nvidia,pins = "ph3";
|
|
|
|
|
nvidia,function = "gmi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph4 {
|
|
|
|
|
nvidia,pins = "ph4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph5 {
|
|
|
|
|
nvidia,pins = "ph5";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ph6 {
|
|
|
|
|
nvidia,pins = "ph6";
|
|
|
|
|
nvidia,function = "gmi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
ph7 {
|
|
|
|
|
nvidia,pins = "ph7";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pi0 {
|
|
|
|
|
nvidia,pins = "pi0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pi1 {
|
|
|
|
|
nvidia,pins = "pi1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pi2 {
|
|
|
|
|
nvidia,pins = "pi2";
|
|
|
|
|
nvidia,function = "rsvd4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pi3 {
|
|
|
|
|
nvidia,pins = "pi3";
|
|
|
|
|
nvidia,function = "spi4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pi4 {
|
|
|
|
|
nvidia,pins = "pi4";
|
|
|
|
|
nvidia,function = "gmi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pi5 {
|
|
|
|
|
nvidia,pins = "pi5";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pi6 {
|
|
|
|
|
nvidia,pins = "pi6";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pi7 {
|
|
|
|
|
nvidia,pins = "pi7";
|
|
|
|
|
nvidia,function = "rsvd1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pj0 {
|
|
|
|
|
nvidia,pins = "pj0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pj2 {
|
|
|
|
|
nvidia,pins = "pj2";
|
|
|
|
|
nvidia,function = "rsvd1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
uart2_cts_n_pj5 {
|
|
|
|
|
nvidia,pins = "uart2_cts_n_pj5";
|
|
|
|
|
nvidia,function = "uartb";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart2_rts_n_pj6 {
|
|
|
|
|
nvidia,pins = "uart2_rts_n_pj6";
|
|
|
|
|
nvidia,function = "uartb";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pj7 {
|
|
|
|
|
nvidia,pins = "pj7";
|
|
|
|
|
nvidia,function = "uartd";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pk0 {
|
|
|
|
|
nvidia,pins = "pk0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pk1 {
|
|
|
|
|
nvidia,pins = "pk1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pk2 {
|
|
|
|
|
nvidia,pins = "pk2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pk3 {
|
|
|
|
|
nvidia,pins = "pk3";
|
|
|
|
|
nvidia,function = "gmi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pk4 {
|
|
|
|
|
nvidia,pins = "pk4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
spdif_out_pk5 {
|
|
|
|
|
nvidia,pins = "spdif_out_pk5";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
spdif_in_pk6 {
|
|
|
|
|
nvidia,pins = "spdif_in_pk6";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pk7 {
|
|
|
|
|
nvidia,pins = "pk7";
|
|
|
|
|
nvidia,function = "uartd";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap1_fs_pn0 {
|
|
|
|
|
nvidia,pins = "dap1_fs_pn0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd4";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap1_din_pn1 {
|
|
|
|
|
nvidia,pins = "dap1_din_pn1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd4";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap1_dout_pn2 {
|
|
|
|
|
nvidia,pins = "dap1_dout_pn2";
|
|
|
|
|
nvidia,function = "sata";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap1_sclk_pn3 {
|
|
|
|
|
nvidia,pins = "dap1_sclk_pn3";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd4";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
usb_vbus_en0_pn4 {
|
|
|
|
|
nvidia,pins = "usb_vbus_en0_pn4";
|
|
|
|
|
nvidia,function = "usb";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
usb_vbus_en1_pn5 {
|
|
|
|
|
nvidia,pins = "usb_vbus_en1_pn5";
|
|
|
|
|
nvidia,function = "usb";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
hdmi_int_pn7 {
|
|
|
|
|
nvidia,pins = "hdmi_int_pn7";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_data7_po0 {
|
|
|
|
|
nvidia,pins = "ulpi_data7_po0";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
ulpi_data0_po1 {
|
|
|
|
|
nvidia,pins = "ulpi_data0_po1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_data1_po2 {
|
|
|
|
|
nvidia,pins = "ulpi_data1_po2";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
ulpi_data2_po3 {
|
|
|
|
|
nvidia,pins = "ulpi_data2_po3";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
ulpi_data3_po4 {
|
|
|
|
|
nvidia,pins = "ulpi_data3_po4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_data4_po5 {
|
|
|
|
|
nvidia,pins = "ulpi_data4_po5";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
ulpi_data5_po6 {
|
|
|
|
|
nvidia,pins = "ulpi_data5_po6";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_data6_po7 {
|
|
|
|
|
nvidia,pins = "ulpi_data6_po7";
|
|
|
|
|
nvidia,function = "ulpi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap3_fs_pp0 {
|
|
|
|
|
nvidia,pins = "dap3_fs_pp0";
|
|
|
|
|
nvidia,function = "i2s2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap3_din_pp1 {
|
|
|
|
|
nvidia,pins = "dap3_din_pp1";
|
|
|
|
|
nvidia,function = "i2s2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap3_dout_pp2 {
|
|
|
|
|
nvidia,pins = "dap3_dout_pp2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap3_sclk_pp3 {
|
|
|
|
|
nvidia,pins = "dap3_sclk_pp3";
|
|
|
|
|
nvidia,function = "rsvd3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap4_fs_pp4 {
|
|
|
|
|
nvidia,pins = "dap4_fs_pp4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd4";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap4_din_pp5 {
|
|
|
|
|
nvidia,pins = "dap4_din_pp5";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd3";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap4_dout_pp6 {
|
|
|
|
|
nvidia,pins = "dap4_dout_pp6";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd4";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap4_sclk_pp7 {
|
|
|
|
|
nvidia,pins = "dap4_sclk_pp7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd3";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_col0_pq0 {
|
|
|
|
|
nvidia,pins = "kb_col0_pq0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_col1_pq1 {
|
|
|
|
|
nvidia,pins = "kb_col1_pq1";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_col2_pq2 {
|
|
|
|
|
nvidia,pins = "kb_col2_pq2";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_col3_pq3 {
|
|
|
|
|
nvidia,pins = "kb_col3_pq3";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_col4_pq4 {
|
|
|
|
|
nvidia,pins = "kb_col4_pq4";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_col5_pq5 {
|
|
|
|
|
nvidia,pins = "kb_col5_pq5";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_col6_pq6 {
|
|
|
|
|
nvidia,pins = "kb_col6_pq6";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_col7_pq7 {
|
|
|
|
|
nvidia,pins = "kb_col7_pq7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_row0_pr0 {
|
|
|
|
|
nvidia,pins = "kb_row0_pr0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row1_pr1 {
|
|
|
|
|
nvidia,pins = "kb_row1_pr1";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row2_pr2 {
|
|
|
|
|
nvidia,pins = "kb_row2_pr2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row3_pr3 {
|
|
|
|
|
nvidia,pins = "kb_row3_pr3";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "kbc";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row4_pr4 {
|
|
|
|
|
nvidia,pins = "kb_row4_pr4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row5_pr5 {
|
|
|
|
|
nvidia,pins = "kb_row5_pr5";
|
|
|
|
|
nvidia,function = "rsvd3";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row6_pr6 {
|
|
|
|
|
nvidia,pins = "kb_row6_pr6";
|
|
|
|
|
nvidia,function = "displaya_alt";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row7_pr7 {
|
|
|
|
|
nvidia,pins = "kb_row7_pr7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row8_ps0 {
|
|
|
|
|
nvidia,pins = "kb_row8_ps0";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_row9_ps1 {
|
|
|
|
|
nvidia,pins = "kb_row9_ps1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "uarta";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row10_ps2 {
|
|
|
|
|
nvidia,pins = "kb_row10_ps2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "uarta";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row11_ps3 {
|
|
|
|
|
nvidia,pins = "kb_row11_ps3";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row12_ps4 {
|
|
|
|
|
nvidia,pins = "kb_row12_ps4";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row13_ps5 {
|
|
|
|
|
nvidia,pins = "kb_row13_ps5";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
kb_row14_ps6 {
|
|
|
|
|
nvidia,pins = "kb_row14_ps6";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row15_ps7 {
|
|
|
|
|
nvidia,pins = "kb_row15_ps7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row16_pt0 {
|
|
|
|
|
nvidia,pins = "kb_row16_pt0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
kb_row17_pt1 {
|
|
|
|
|
nvidia,pins = "kb_row17_pt1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gen2_i2c_scl_pt5 {
|
|
|
|
|
nvidia,pins = "gen2_i2c_scl_pt5";
|
|
|
|
|
nvidia,function = "i2c2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
gen2_i2c_sda_pt6 {
|
|
|
|
|
nvidia,pins = "gen2_i2c_sda_pt6";
|
|
|
|
|
nvidia,function = "i2c2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_cmd_pt7 {
|
|
|
|
|
nvidia,pins = "sdmmc4_cmd_pt7";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pu0 {
|
|
|
|
|
nvidia,pins = "pu0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pu1 {
|
|
|
|
|
nvidia,pins = "pu1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pu2 {
|
|
|
|
|
nvidia,pins = "pu2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pu3 {
|
|
|
|
|
nvidia,pins = "pu3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pu4 {
|
|
|
|
|
nvidia,pins = "pu4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pu5 {
|
|
|
|
|
nvidia,pins = "pu5";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pu6 {
|
|
|
|
|
nvidia,pins = "pu6";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pv0 {
|
|
|
|
|
nvidia,pins = "pv0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pv1 {
|
|
|
|
|
nvidia,pins = "pv1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_cd_n_pv2 {
|
|
|
|
|
nvidia,pins = "sdmmc3_cd_n_pv2";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc1_wp_n_pv3 {
|
|
|
|
|
nvidia,pins = "sdmmc1_wp_n_pv3";
|
|
|
|
|
nvidia,function = "sdmmc1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ddc_scl_pv4 {
|
|
|
|
|
nvidia,pins = "ddc_scl_pv4";
|
|
|
|
|
nvidia,function = "i2c4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ddc_sda_pv5 {
|
|
|
|
|
nvidia,pins = "ddc_sda_pv5";
|
|
|
|
|
nvidia,function = "i2c4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
gpio_w2_aud_pw2 {
|
|
|
|
|
nvidia,pins = "gpio_w2_aud_pw2";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gpio_w3_aud_pw3 {
|
|
|
|
|
nvidia,pins = "gpio_w3_aud_pw3";
|
|
|
|
|
nvidia,function = "spi6";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dap_mclk1_pw4 {
|
|
|
|
|
nvidia,pins = "dap_mclk1_pw4";
|
|
|
|
|
nvidia,function = "extperiph1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
clk2_out_pw5 {
|
|
|
|
|
nvidia,pins = "clk2_out_pw5";
|
|
|
|
|
nvidia,function = "extperiph2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart3_txd_pw6 {
|
|
|
|
|
nvidia,pins = "uart3_txd_pw6";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
uart3_rxd_pw7 {
|
|
|
|
|
nvidia,pins = "uart3_rxd_pw7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dvfs_pwm_px0 {
|
|
|
|
|
nvidia,pins = "dvfs_pwm_px0";
|
|
|
|
|
nvidia,function = "cldvfs";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
gpio_x1_aud_px1 {
|
|
|
|
|
nvidia,pins = "gpio_x1_aud_px1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
dvfs_clk_px2 {
|
|
|
|
|
nvidia,pins = "dvfs_clk_px2";
|
|
|
|
|
nvidia,function = "cldvfs";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
gpio_x3_aud_px3 {
|
|
|
|
|
nvidia,pins = "gpio_x3_aud_px3";
|
|
|
|
|
nvidia,function = "rsvd4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gpio_x4_aud_px4 {
|
|
|
|
|
nvidia,pins = "gpio_x4_aud_px4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gpio_x5_aud_px5 {
|
|
|
|
|
nvidia,pins = "gpio_x5_aud_px5";
|
|
|
|
|
nvidia,function = "rsvd4";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gpio_x6_aud_px6 {
|
|
|
|
|
nvidia,pins = "gpio_x6_aud_px6";
|
|
|
|
|
nvidia,function = "gmi";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
gpio_x7_aud_px7 {
|
|
|
|
|
nvidia,pins = "gpio_x7_aud_px7";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_clk_py0 {
|
|
|
|
|
nvidia,pins = "ulpi_clk_py0";
|
|
|
|
|
nvidia,function = "spi1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_dir_py1 {
|
|
|
|
|
nvidia,pins = "ulpi_dir_py1";
|
|
|
|
|
nvidia,function = "spi1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_nxt_py2 {
|
|
|
|
|
nvidia,pins = "ulpi_nxt_py2";
|
|
|
|
|
nvidia,function = "spi1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
ulpi_stp_py3 {
|
|
|
|
|
nvidia,pins = "ulpi_stp_py3";
|
|
|
|
|
nvidia,function = "spi1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc1_dat3_py4 {
|
|
|
|
|
nvidia,pins = "sdmmc1_dat3_py4";
|
|
|
|
|
nvidia,function = "sdmmc1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc1_dat2_py5 {
|
|
|
|
|
nvidia,pins = "sdmmc1_dat2_py5";
|
|
|
|
|
nvidia,function = "sdmmc1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc1_dat1_py6 {
|
|
|
|
|
nvidia,pins = "sdmmc1_dat1_py6";
|
|
|
|
|
nvidia,function = "sdmmc1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc1_dat0_py7 {
|
|
|
|
|
nvidia,pins = "sdmmc1_dat0_py7";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc1_clk_pz0 {
|
|
|
|
|
nvidia,pins = "sdmmc1_clk_pz0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "rsvd3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc1_cmd_pz1 {
|
|
|
|
|
nvidia,pins = "sdmmc1_cmd_pz1";
|
|
|
|
|
nvidia,function = "sdmmc1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
pwr_i2c_scl_pz6 {
|
|
|
|
|
nvidia,pins = "pwr_i2c_scl_pz6";
|
|
|
|
|
nvidia,function = "i2cpwr";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pwr_i2c_sda_pz7 {
|
|
|
|
|
nvidia,pins = "pwr_i2c_sda_pz7";
|
|
|
|
|
nvidia,function = "i2cpwr";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat0_paa0 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat0_paa0";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat1_paa1 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat1_paa1";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat2_paa2 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat2_paa2";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat3_paa3 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat3_paa3";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat4_paa4 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat4_paa4";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat5_paa5 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat5_paa5";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat6_paa6 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat6_paa6";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_dat7_paa7 {
|
|
|
|
|
nvidia,pins = "sdmmc4_dat7_paa7";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb0 {
|
|
|
|
|
nvidia,pins = "pbb0";
|
|
|
|
|
nvidia,function = "vimclk2_alt";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
cam_i2c_scl_pbb1 {
|
|
|
|
|
nvidia,pins = "cam_i2c_scl_pbb1";
|
|
|
|
|
nvidia,function = "i2c3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
cam_i2c_sda_pbb2 {
|
|
|
|
|
nvidia,pins = "cam_i2c_sda_pbb2";
|
|
|
|
|
nvidia,function = "i2c3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb3 {
|
|
|
|
|
nvidia,pins = "pbb3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb4 {
|
|
|
|
|
nvidia,pins = "pbb4";
|
|
|
|
|
nvidia,function = "vgp4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb5 {
|
|
|
|
|
nvidia,pins = "pbb5";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb6 {
|
|
|
|
|
nvidia,pins = "pbb6";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pbb7 {
|
|
|
|
|
nvidia,pins = "pbb7";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
cam_mclk_pcc0 {
|
|
|
|
|
nvidia,pins = "cam_mclk_pcc0";
|
|
|
|
|
nvidia,function = "vi_alt3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pcc1 {
|
|
|
|
|
nvidia,pins = "pcc1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pcc2 {
|
|
|
|
|
nvidia,pins = "pcc2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc4_clk_pcc4 {
|
|
|
|
|
nvidia,pins = "sdmmc4_clk_pcc4";
|
|
|
|
|
nvidia,function = "sdmmc4";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
clk2_req_pcc5 {
|
|
|
|
|
nvidia,pins = "clk2_req_pcc5";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
2014-08-23 04:07:13 +07:00
|
|
|
pex_l0_rst_n_pdd1 {
|
|
|
|
|
nvidia,pins = "pex_l0_rst_n_pdd1";
|
|
|
|
|
nvidia,function = "pe0";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pex_l0_clkreq_n_pdd2 {
|
|
|
|
|
nvidia,pins = "pex_l0_clkreq_n_pdd2";
|
|
|
|
|
nvidia,function = "pe0";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2014-08-23 04:07:13 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pex_wake_n_pdd3 {
|
|
|
|
|
nvidia,pins = "pex_wake_n_pdd3";
|
|
|
|
|
nvidia,function = "pe";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2014-08-23 04:07:13 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
pex_l1_rst_n_pdd5 {
|
|
|
|
|
nvidia,pins = "pex_l1_rst_n_pdd5";
|
|
|
|
|
nvidia,function = "pe1";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pex_l1_clkreq_n_pdd6 {
|
|
|
|
|
nvidia,pins = "pex_l1_clkreq_n_pdd6";
|
|
|
|
|
nvidia,function = "pe1";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
2014-08-23 04:07:13 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
clk3_out_pee0 {
|
|
|
|
|
nvidia,pins = "clk3_out_pee0";
|
|
|
|
|
nvidia,function = "extperiph3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
clk3_req_pee1 {
|
|
|
|
|
nvidia,pins = "clk3_req_pee1";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
dap_mclk1_req_pee2 {
|
|
|
|
|
nvidia,pins = "dap_mclk1_req_pee2";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
hdmi_cec_pee3 {
|
|
|
|
|
nvidia,pins = "hdmi_cec_pee3";
|
|
|
|
|
nvidia,function = "cec";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
sdmmc3_clk_lb_out_pee4 {
|
|
|
|
|
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
sdmmc3_clk_lb_in_pee5 {
|
|
|
|
|
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
|
|
|
|
|
nvidia,function = "sdmmc3";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
dp_hpd_pff0 {
|
|
|
|
|
nvidia,pins = "dp_hpd_pff0";
|
|
|
|
|
nvidia,function = "dp";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
usb_vbus_en2_pff1 {
|
|
|
|
|
nvidia,pins = "usb_vbus_en2_pff1";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pff2 {
|
|
|
|
|
nvidia,pins = "pff2";
|
|
|
|
|
nvidia,function = "rsvd2";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
core_pwr_req {
|
|
|
|
|
nvidia,pins = "core_pwr_req";
|
|
|
|
|
nvidia,function = "pwron";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
cpu_pwr_req {
|
|
|
|
|
nvidia,pins = "cpu_pwr_req";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "cpu";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
|
|
|
|
pwr_int_n {
|
|
|
|
|
nvidia,pins = "pwr_int_n";
|
|
|
|
|
nvidia,function = "pmi";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
reset_out_n {
|
|
|
|
|
nvidia,pins = "reset_out_n";
|
|
|
|
|
nvidia,function = "reset_out_n";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
clk_32k_in {
|
|
|
|
|
nvidia,pins = "clk_32k_in";
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,function = "clk";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
2015-02-18 01:57:45 +07:00
|
|
|
nvidia,tristate = <TEGRA_PIN_ENABLE>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
|
|
|
};
|
|
|
|
|
jtag_rtck {
|
|
|
|
|
nvidia,pins = "jtag_rtck";
|
|
|
|
|
nvidia,function = "rtck";
|
|
|
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
|
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
|
|
|
};
|
2016-06-22 01:51:49 +07:00
|
|
|
dsi_b {
|
|
|
|
|
nvidia,pins = "mipi_pad_ctrl_dsi_b";
|
|
|
|
|
nvidia,function = "dsi_b";
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2016-01-26 23:59:18 +07:00
|
|
|
/*
|
|
|
|
|
* First high speed UART, exposed on the expansion connector J3A2
|
|
|
|
|
* Pin 41: BR_UART1_TXD
|
|
|
|
|
* Pin 44: BR_UART1_RXD
|
|
|
|
|
*/
|
2016-09-08 11:16:40 +07:00
|
|
|
serial@70006000 {
|
2016-01-26 23:59:18 +07:00
|
|
|
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Second high speed UART, exposed on the expansion connector J3A2
|
|
|
|
|
* Pin 65: UART2_RXD
|
|
|
|
|
* Pin 68: UART2_TXD
|
|
|
|
|
* Pin 71: UART2_CTS_L
|
|
|
|
|
* Pin 74: UART2_RTS_L
|
|
|
|
|
*/
|
2016-09-08 11:16:40 +07:00
|
|
|
serial@70006040 {
|
2016-01-26 23:59:18 +07:00
|
|
|
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
/* DB9 serial port */
|
2016-06-30 05:21:37 +07:00
|
|
|
serial@70006300 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
|
2016-06-30 05:21:37 +07:00
|
|
|
i2c@7000c000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
|
2014-04-25 23:12:42 +07:00
|
|
|
rt5639: audio-codec@1c {
|
|
|
|
|
compatible = "realtek,rt5639";
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
reg = <0x1c>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
realtek,ldo1-en-gpios =
|
|
|
|
|
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
temperature-sensor@4c {
|
|
|
|
|
compatible = "ti,tmp451";
|
|
|
|
|
reg = <0x4c>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
eeprom@56 {
|
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
|
reg = <0x56>;
|
|
|
|
|
pagesize = <8>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Expansion GEN2_I2C_* */
|
2016-06-30 05:21:37 +07:00
|
|
|
i2c@7000c400 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Expansion CAM_I2C_* */
|
2016-06-30 05:21:37 +07:00
|
|
|
i2c@7000c500 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* HDMI DDC */
|
2016-06-30 05:21:37 +07:00
|
|
|
hdmi_ddc: i2c@7000c700 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Expansion PWR_I2C_*, on-board components */
|
2016-06-30 05:21:37 +07:00
|
|
|
i2c@7000d000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
|
|
pmic: pmic@40 {
|
|
|
|
|
compatible = "ams,as3722";
|
|
|
|
|
reg = <0x40>;
|
|
|
|
|
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
|
|
|
|
|
ams,system-power-controller;
|
|
|
|
|
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&as3722_default>;
|
|
|
|
|
|
|
|
|
|
as3722_default: pinmux {
|
|
|
|
|
gpio0 {
|
|
|
|
|
pins = "gpio0";
|
|
|
|
|
function = "gpio";
|
|
|
|
|
bias-pull-down;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio1_2_4_7 {
|
|
|
|
|
pins = "gpio1", "gpio2", "gpio4", "gpio7";
|
|
|
|
|
function = "gpio";
|
|
|
|
|
bias-pull-up;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio3_5_6 {
|
|
|
|
|
pins = "gpio3", "gpio5", "gpio6";
|
|
|
|
|
bias-high-impedance;
|
|
|
|
|
};
|
|
|
|
|
};
|
2014-03-25 07:04:43 +07:00
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
vsup-sd2-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd3-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd4-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd5-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vin-ldo0-supply = <&vdd_1v35_lp0>;
|
|
|
|
|
vin-ldo1-6-supply = <&vdd_3v3_run>;
|
|
|
|
|
vin-ldo2-5-7-supply = <&vddio_1v8>;
|
|
|
|
|
vin-ldo3-4-supply = <&vdd_3v3_sys>;
|
|
|
|
|
vin-ldo9-10-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vin-ldo11-supply = <&vdd_3v3_run>;
|
|
|
|
|
|
2015-05-13 21:58:45 +07:00
|
|
|
vdd_cpu: sd0 {
|
2014-03-25 07:04:43 +07:00
|
|
|
regulator-name = "+VDD_CPU_AP";
|
|
|
|
|
regulator-min-microvolt = <700000>;
|
|
|
|
|
regulator-max-microvolt = <1400000>;
|
|
|
|
|
regulator-min-microamp = <3500000>;
|
|
|
|
|
regulator-max-microamp = <3500000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
2014-07-10 01:53:17 +07:00
|
|
|
ams,ext-control = <2>;
|
2014-03-25 07:04:43 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sd1 {
|
|
|
|
|
regulator-name = "+VDD_CORE";
|
|
|
|
|
regulator-min-microvolt = <700000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-min-microamp = <2500000>;
|
|
|
|
|
regulator-max-microamp = <2500000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
2014-07-10 01:53:17 +07:00
|
|
|
ams,ext-control = <1>;
|
2014-03-25 07:04:43 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_1v35_lp0: sd2 {
|
|
|
|
|
regulator-name = "+1.35V_LP0(sd2)";
|
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sd3 {
|
|
|
|
|
regulator-name = "+1.35V_LP0(sd3)";
|
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
2014-04-25 22:44:47 +07:00
|
|
|
vdd_1v05_run: sd4 {
|
2014-03-25 07:04:43 +07:00
|
|
|
regulator-name = "+1.05V_RUN";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vddio_1v8: sd5 {
|
|
|
|
|
regulator-name = "+1.8V_VDDIO";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2015-07-01 16:13:47 +07:00
|
|
|
vdd_gpu: sd6 {
|
2014-03-25 07:04:43 +07:00
|
|
|
regulator-name = "+VDD_GPU_AP";
|
|
|
|
|
regulator-min-microvolt = <650000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-min-microamp = <3500000>;
|
|
|
|
|
regulator-max-microamp = <3500000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-17 23:02:45 +07:00
|
|
|
avdd_1v05_run: ldo0 {
|
2014-03-25 07:04:43 +07:00
|
|
|
regulator-name = "+1.05V_RUN_AVDD";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
2014-07-10 01:53:17 +07:00
|
|
|
ams,ext-control = <1>;
|
2014-03-25 07:04:43 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo1 {
|
|
|
|
|
regulator-name = "+1.8V_RUN_CAM";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo2 {
|
|
|
|
|
regulator-name = "+1.2V_GEN_AVDD";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo3 {
|
|
|
|
|
regulator-name = "+1.05V_LP0_VDD_RTC";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
ams,enable-tracking;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo4 {
|
|
|
|
|
regulator-name = "+2.8V_RUN_CAM";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo5 {
|
|
|
|
|
regulator-name = "+1.2V_RUN_CAM_FRONT";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vddio_sdmmc3: ldo6 {
|
|
|
|
|
regulator-name = "+VDDIO_SDMMC3";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo7 {
|
|
|
|
|
regulator-name = "+1.05V_RUN_CAM_REAR";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo9 {
|
|
|
|
|
regulator-name = "+3.3V_RUN_TOUCH";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo10 {
|
|
|
|
|
regulator-name = "+2.8V_RUN_CAM_AF";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo11 {
|
|
|
|
|
regulator-name = "+1.8V_RUN_VPP_FUSE";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Expansion TS_SPI_* */
|
2016-06-30 05:21:37 +07:00
|
|
|
spi@7000d400 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Internal SPI */
|
2016-06-30 05:21:37 +07:00
|
|
|
spi@7000da00 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
spi-max-frequency = <25000000>;
|
|
|
|
|
spi-flash@0 {
|
|
|
|
|
compatible = "winbond,w25q32dw";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
spi-max-frequency = <20000000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
pmc@7000e400 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
nvidia,invert-interrupt;
|
|
|
|
|
nvidia,suspend-mode = <1>;
|
|
|
|
|
nvidia,cpu-pwr-good-time = <500>;
|
|
|
|
|
nvidia,cpu-pwr-off-time = <300>;
|
|
|
|
|
nvidia,core-pwr-good-time = <641 3845>;
|
|
|
|
|
nvidia,core-pwr-off-time = <61036>;
|
|
|
|
|
nvidia,core-power-req-active-high;
|
|
|
|
|
nvidia,sys-clock-req-active-high;
|
2015-01-06 17:52:57 +07:00
|
|
|
|
|
|
|
|
i2c-thermtrip {
|
|
|
|
|
nvidia,i2c-controller-id = <4>;
|
|
|
|
|
nvidia,bus-addr = <0x40>;
|
|
|
|
|
nvidia,reg-addr = <0x36>;
|
|
|
|
|
nvidia,reg-data = <0x2>;
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
|
2014-07-16 15:54:18 +07:00
|
|
|
/* Serial ATA */
|
2016-06-30 05:21:37 +07:00
|
|
|
sata@70020000 {
|
2014-07-16 15:54:18 +07:00
|
|
|
status = "okay";
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
|
2015-11-12 00:22:27 +07:00
|
|
|
phy-names = "sata-0";
|
|
|
|
|
|
2014-07-16 15:54:18 +07:00
|
|
|
hvdd-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
vddio-supply = <&vdd_1v05_run>;
|
|
|
|
|
avdd-supply = <&vdd_1v05_run>;
|
|
|
|
|
|
|
|
|
|
target-5v-supply = <&vdd_5v0_sata>;
|
|
|
|
|
target-12v-supply = <&vdd_12v0_sata>;
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
hda@70030000 {
|
2014-05-22 14:38:31 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
usb@70090000 {
|
|
|
|
|
phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
|
|
|
|
|
<&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
|
|
|
|
|
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
|
|
|
|
|
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
|
2015-11-12 00:22:27 +07:00
|
|
|
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
|
|
|
|
|
|
|
|
|
|
avddio-pex-supply = <&vdd_1v05_run>;
|
|
|
|
|
dvddio-pex-supply = <&vdd_1v05_run>;
|
|
|
|
|
avdd-usb-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
avdd-pll-utmip-supply = <&vddio_1v8>;
|
|
|
|
|
avdd-pll-erefe-supply = <&avdd_1v05_run>;
|
|
|
|
|
avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
|
|
|
|
|
hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
padctl@7009f000 {
|
2015-11-12 00:22:27 +07:00
|
|
|
status = "okay";
|
2014-06-19 18:37:10 +07:00
|
|
|
|
2015-11-12 00:22:27 +07:00
|
|
|
pads {
|
|
|
|
|
usb2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
lanes {
|
|
|
|
|
usb2-0 {
|
|
|
|
|
nvidia,function = "xusb";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb2-1 {
|
|
|
|
|
nvidia,function = "xusb";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb2-2 {
|
|
|
|
|
nvidia,function = "xusb";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
2014-06-19 18:37:10 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie {
|
2015-11-12 00:22:27 +07:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
lanes {
|
|
|
|
|
pcie-0 {
|
|
|
|
|
nvidia,function = "usb3-ss";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie-2 {
|
|
|
|
|
nvidia,function = "pcie";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie-4 {
|
|
|
|
|
nvidia,function = "pcie";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
2014-06-19 18:37:10 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sata {
|
2015-11-12 00:22:27 +07:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
lanes {
|
|
|
|
|
sata-0 {
|
|
|
|
|
nvidia,function = "sata";
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ports {
|
|
|
|
|
/* Micro A/B */
|
|
|
|
|
usb2-0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
mode = "otg";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Mini PCIe */
|
|
|
|
|
usb2-1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
mode = "host";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* USB3 */
|
|
|
|
|
usb2-2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
mode = "host";
|
|
|
|
|
|
|
|
|
|
vbus-supply = <&vdd_usb3_vbus>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb3-0 {
|
|
|
|
|
nvidia,usb2-companion = <2>;
|
|
|
|
|
status = "okay";
|
2014-06-19 18:37:10 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
/* SD card */
|
2016-06-30 05:21:37 +07:00
|
|
|
sdhci@700b0400 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
|
|
|
|
|
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
|
2014-04-29 00:05:57 +07:00
|
|
|
wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
bus-width = <4>;
|
2014-04-16 23:34:18 +07:00
|
|
|
vqmmc-supply = <&vddio_sdmmc3>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* eMMC */
|
2016-06-30 05:21:37 +07:00
|
|
|
sdhci@700b0600 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
bus-width = <8>;
|
2014-06-03 19:48:46 +07:00
|
|
|
non-removable;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
|
2015-05-13 21:58:45 +07:00
|
|
|
/* CPU DFLL clock */
|
2016-06-30 05:21:37 +07:00
|
|
|
clock@70110000 {
|
2015-05-13 21:58:45 +07:00
|
|
|
status = "okay";
|
|
|
|
|
vdd-cpu-supply = <&vdd_cpu>;
|
|
|
|
|
nvidia,i2c-fs-rate = <400000>;
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
ahub@70300000 {
|
|
|
|
|
i2s@70301100 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* mini-PCIe USB */
|
2016-06-30 05:21:37 +07:00
|
|
|
usb@7d004000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
usb-phy@7d004000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* USB A connector */
|
2016-06-30 05:21:37 +07:00
|
|
|
usb@7d008000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2016-06-30 05:21:37 +07:00
|
|
|
usb-phy@7d008000 {
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
status = "okay";
|
|
|
|
|
vbus-supply = <&vdd_usb3_vbus>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
clocks {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
clk32k_in: clock@0 {
|
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2015-05-13 21:58:50 +07:00
|
|
|
cpus {
|
|
|
|
|
cpu@0 {
|
|
|
|
|
vdd-cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
gpio-keys {
|
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
|
|
power {
|
|
|
|
|
label = "Power";
|
|
|
|
|
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
|
|
|
|
linux,code = <KEY_POWER>;
|
|
|
|
|
debounce-interval = <10>;
|
2016-02-09 04:55:43 +07:00
|
|
|
wakeup-source;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
2014-03-25 07:04:43 +07:00
|
|
|
vdd_mux: regulator@0 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
regulator-name = "+VDD_MUX";
|
|
|
|
|
regulator-min-microvolt = <12000000>;
|
|
|
|
|
regulator-max-microvolt = <12000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_5v0_sys: regulator@1 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <1>;
|
|
|
|
|
regulator-name = "+5V_SYS";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_sys: regulator@2 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <2>;
|
|
|
|
|
regulator-name = "+3.3V_SYS";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_run: regulator@3 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <3>;
|
|
|
|
|
regulator-name = "+3.3V_RUN";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_3v3_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_hdmi: regulator@4 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <4>;
|
|
|
|
|
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
vin-supply = <&vdd_3v3_run>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_usb1_vbus: regulator@7 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <7>;
|
|
|
|
|
regulator-name = "+USB0_VBUS_SW";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio-open-drain;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
vdd_usb3_vbus: regulator@8 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <8>;
|
|
|
|
|
regulator-name = "+5V_USB_HS";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio-open-drain;
|
2014-03-25 07:04:43 +07:00
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_lp0: regulator@10 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <10>;
|
|
|
|
|
regulator-name = "+3.3V_LP0";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_3v3_sys>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
2014-04-25 22:44:47 +07:00
|
|
|
|
|
|
|
|
vdd_hdmi_pll: regulator@11 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <11>;
|
|
|
|
|
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
|
|
|
|
|
vin-supply = <&vdd_1v05_run>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_5v0_hdmi: regulator@12 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <12>;
|
|
|
|
|
regulator-name = "+5V_HDMI_CON";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
2014-07-16 15:54:18 +07:00
|
|
|
|
|
|
|
|
/* Molex power connector */
|
|
|
|
|
vdd_5v0_sata: regulator@13 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <13>;
|
|
|
|
|
regulator-name = "+5V_SATA";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_12v0_sata: regulator@14 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <14>;
|
|
|
|
|
regulator-name = "+12V_SATA";
|
|
|
|
|
regulator-min-microvolt = <12000000>;
|
|
|
|
|
regulator-max-microvolt = <12000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sound {
|
|
|
|
|
compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
|
|
|
|
|
"nvidia,tegra-audio-rt5640";
|
|
|
|
|
nvidia,model = "NVIDIA Tegra Jetson TK1";
|
|
|
|
|
|
|
|
|
|
nvidia,audio-routing =
|
|
|
|
|
"Headphones", "HPOR",
|
|
|
|
|
"Headphones", "HPOL",
|
|
|
|
|
"Mic Jack", "MICBIAS1",
|
|
|
|
|
"IN2P", "Mic Jack";
|
|
|
|
|
|
|
|
|
|
nvidia,i2s-controller = <&tegra_i2s1>;
|
2014-04-25 23:12:42 +07:00
|
|
|
nvidia,audio-codec = <&rt5639>;
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
|
|
|
|
|
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
|
|
|
|
|
|
|
|
|
|
clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
|
|
|
|
|
<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
|
|
|
|
|
<&tegra_car TEGRA124_CLK_EXTERN1>;
|
|
|
|
|
clock-names = "pll_a", "pll_a_out0", "mclk";
|
|
|
|
|
};
|
2014-09-26 16:43:12 +07:00
|
|
|
|
|
|
|
|
thermal-zones {
|
|
|
|
|
cpu {
|
|
|
|
|
trips {
|
2016-05-11 17:20:19 +07:00
|
|
|
cpu-shutdown-trip {
|
2014-09-26 16:43:12 +07:00
|
|
|
temperature = <101000>;
|
|
|
|
|
hysteresis = <0>;
|
|
|
|
|
type = "critical";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mem {
|
|
|
|
|
trips {
|
2016-05-11 17:20:19 +07:00
|
|
|
mem-shutdown-trip {
|
2014-09-26 16:43:12 +07:00
|
|
|
temperature = <101000>;
|
|
|
|
|
hysteresis = <0>;
|
|
|
|
|
type = "critical";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpu {
|
|
|
|
|
trips {
|
2016-05-11 17:20:19 +07:00
|
|
|
gpu-shutdown-trip {
|
2014-09-26 16:43:12 +07:00
|
|
|
temperature = <101000>;
|
|
|
|
|
hysteresis = <0>;
|
|
|
|
|
type = "critical";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
ARM: tegra: add Jetson TK1 device tree
Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
GPIOs, I2C, SPI, CSI, eDP, etc.
The following features work with this device tree: UART, SD card, eMMC,
SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
power-off, suspend/resume (LP1) with wake via RTC alarm.
The following features should work with this device tree, but are not
validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
power button.
The following features are not yet implemented in this device tree: Most
voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
PCIe connector), CSI, SATA.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 04:47:53 +07:00
|
|
|
};
|