The .TOC. symbol on the PowerPC64 ABIv2 identifies the GOT
pointer, similar to how other architectures use _GLOBAL_OFFSET_TABLE_.
This is not a symbol that needs relocation, and should be ignored
by depmod.
Makefile.am uses `sed -E', which it is found on BSD sed; however a
replacement on GNU sed would be `sed -r'. Both intend to use extended
regular expressions (ERE). However I have a system that does not support
those, in benefit for portability could you consider replacing ERE by BRE.
Signed-off-by: Héctor Orón Martínez <hector.oron@gmail.com>
Travis is poluting the environment, particularly PYTHON_CFLAGS which
makes the build to fail. Just unset the variable since we don't want to
override these cflags.
The -f switch is accepted by insmod, but silently ignored. This
causes the user to wonder why things don't work. As insmod is
most often used with "evil" modules, -f is almost default and
thus needs to work.
Signed-off-by: Philippe De Swert <philippe.deswert@jollamobile.com>
Currently, if a value that doesn't match a kernel version
("%u.%u") is passed in, depmod silently falls back to
using uname. Rather than try and work around the caller passing
bad data, just exit out instead.
In between the start of the program and the call to log_setup_kmod_log,
the only messages that will be printed are the ones at or above the
global default level. Debug messages in this range will never be printed
so remove them.
The default log level is currently LOG_ERR. Tools can override this
default but there is a non-trivial amount of setup that needs to
happen before the log level can be changed. Since tools may want to
use the warn level for things such as deprecated flags, change the
default to LOG_WARNING to ensure messages get printed.
Currently, modprobe fails with no output by default if the
search paths it tries are missing:
$ modprobe -S notakernel dm-crypt
$
$ modprobe -S notakernel lkjjweiojo
$
This is fairly cryptic and not at all obvious there is a problem
unless the error code is checked or verbose flags are used.
Update the error message to indicate a problem and print out the
directory that failed.
Use POSIX Extended Regular Expression (ERE) instead of the GNU extension
\| in the install-exec-hook. This makes it create the symlink properly
with busybox sed built with musl libc. It will silently create a broken
symlink otherwise.
Lucas De Marchi: fix up added newline.
ENOSYS is the wrong errno to return when we don't find a module in
kmod_module_insert_module(). Why is it there in the first place? This
goes back to kmod v1 when we couldn't load modules by names, but we
should give a path instead.
708624a ("ELF: initial support for modinfo and strip of modversions and
vermagic.") changed that so we do a lazy-search by the module path in
this function. Later f304afe ("Change error message to reflect
reality") fixed the log message but the return coded remained the same.
We try to execute git in order to get the dependencies for the coverity
rules. And it gets executed even when we are not calling that specific
rule. Later we may want to improve it, but for now let's just silence
the errors of not being a git repository when executing this on a
packaged version.
This is how rmmod(8) looks like:
SEE ALSO
modprobe(8), insmod(8), lsmod(8)modinfo(8)
The attached trivial patch fixes it:
SEE ALSO
modprobe(8), insmod(8), lsmod(8), modinfo(8)
Not all the features (i.e. those available in --enable-* or --with-*)
are really relevant to the final user. Create a KMOD_FEATURES definition
in config.h containing these features.
Reviewed-by: Andreas Mohr <andim2@users.sf.net>
Add a CC_FEATURE_APPEND function that we can use to append the features
that are enabled/disabled. This will generate a single string in the
form "+FEATURE1 +FEATURE2 -FEATURE3".
Reviewed-by: Andreas Mohr <andim2@users.sf.net>
Now that we are able to build our own test modules, also allow to use
cached modules so a) kernel headers are not required and b) distro
maintainers are happy. It's still need a "--disable-test-modules" in
the configure since the default is enabled.
There's no license problems anymore since all modules come from our own
repository, we ship the sources and the modules can be easily rebuilt.
While using "localyesconfig" to build a custom kernel I noticed that
lsmod output now has trailing spaces when the list of "Used by" modules
is empty.
The following patch just delays the space to the point where we are sure
that there are more things to print.
Usually this file is added to keep a directory existing in the
repository but without any real content. In rootfs this can be
problematic if a directory will have all its files inspected. This
happens for kmod_module_get_holders().
Side-note: the 'test-loaded.c' is hit by this problem but doesn't
"notice" because the invalid module returned by get_holders() is not
checked. The modules in its loop are only used to get the name and
generate an output, and NULL was a valid value to generate the name.
Drop-in replacement to libtool: http://dolt.freedesktop.org/. More
details: http://marc.info/?l=freedesktop-xorg&m=120791871615872&w=3
kmod is relatively fast to compile, so it doesn't matter much.
Nonetheless, less forks the better.
Compilation time using ./bootstrap-configure --disable-manpages and
make -j4
libtool
real 0m6.453s
user 0m21.067s
sys 0m0.773s
dolt
real 0m4.792s
user 0m15.920s
sys 0m0.637s
builtin modules are handled in libkmod by looking at the modules.builtin
index. There's no need to check again for the module's initstate to
decide if it's builtin.
The second test, that creates the module by name and then retrieves the
initstate was broken before b95fa91 ('Fix race while loading modules').
We would check /sys and return either builtin (if the module has
parameters) or give an error because we don't find the module (even if
it's in the modules.builtin index)
usecase: two sd cards are being mounted in parallel at same time on
dual core. example modules which are getting loaded is nls_cp437.
While one module is being loaded , it starts creating sysfs files.
meanwhile on other core, modprobe might return saying the module
is KMOD_MODULE_BUILTIN, which might result in not mounting sd card.
Experiments done to prove the issue in kmod.
Added sleep in kernel module.c at the place of creation of sysfs files.
Then tried `modprobe nls_cp437` from two different shells.
While the first was still waiting for its completion ,
the second one returned saying the module is built-in.
[ Lucas:
The problem is that the creation of /sys/module/<name> and
/sys/module/<name>/initstate are not atomic. There's a small window in
which the directory exists but the initstate file was still not
created.
Built-in modules can be handled by searching the modules.builtin file.
We actually lose some "modules" that create entries in /sys/modules
(e.g. vt) and are not in modules.builtin file: only those that can be
compiled as module are present in this file.
We enforce mod->builtin to always be up-to-date when
kmod_module_get_initstate() is called. This way if the directory
exists but the initstate doesn't, we can be sure this is because the
module is in the "coming" state, i.e. kernel didn't create the file
yet, but since builtin modules were already handled by checking our
index the only reason for that to happen is that we hit the race
condition.
I also added some tweaks to the patch, so we don't repeat the code for builtin
lookup. ]
Since we pass -std=gnu99 to the compiler __STDC_VERSION__ is defined to
199901. Even in this case we can use _Noreturn. Delegate the testing to
the configure phase with a compile test.
In future we want to stop using AC_PROG_CC_99 and start using the new
AC_PROG_CC from autoconf 2.70, which tries to choose the most recent
standard.
- There's no need for the various AC_PROG_CC* macros
- No need for AC_C_BIGENDIAN: the only place we care about endianness,
we use __BYTE_ORDER
- Organize calls to be in similar order as systemd
- Disable --disable-largefile. We already had possible bugs in the
index implementation if this were passed. It's now fixed, but it's
never tested. Disable it.
- Bump autoconf requirement to 2.64
malloc(0) can return != NULL. We need to pass the pointer to free().
This happens if index__haschildren(node) returned true, but
child_count is set to 0.
Reusing the root variable was a bad idea. Doing so we could call free()
on a variable that was not allocated. For example: "depmod -b / -h".
Since we would jump to cmdline_failed, root would not be duplicated.
Instead of fighting the order in the options, just used the cleanup
attribute and remove the calls to free() on "config_paths" and "root".
