diff --git a/README.md b/README.md
index c508370..e94e409 100644
--- a/README.md
+++ b/README.md
@@ -30,7 +30,7 @@ This script has been tested on the following Linux distributions: CentOS 6+, Deb
 By default, the script runs all three tests described in the next section below. In the event that you wish to skip one or more of the tests, use the commands below:
 
 ```
-curl -sL yabs.sh | bash -s -- -{bfdighr49}
+curl -sL yabs.sh | bash -s -- -flags
 ```
 
 * `-b` this option forces use of pre-compiled binaries from repo over local packages
@@ -41,7 +41,9 @@ curl -sL yabs.sh | bash -s -- -{bfdighr49}
 * `-r` this option reduces the number of iperf locations (Online.net/Clouvider LON+NYC) to lessen bandwidth usage
 * `-4` this option overrides the Geekbench 5 performance test and runs a Geekbench 4 test instead
 * `-9` this option runs the Geekbench 4 test in addition to the Geekbench 5 test
-* `-j <url>` this option sends a JSON representation of the results to the designated URL (see section below)
+* `-j` this option prints a JSON representation of the results to the screen
+* `-w` this option writes the JSON results to a file
+* `-s <url>` this option sends a JSON representation of the results to the designated URL(s) (see section below)
 
 Options can be grouped together to skip multiple tests, i.e. `-fg` to skip the disk and system performance tests (effectively only testing network performance).
 
@@ -49,12 +51,14 @@ Options can be grouped together to skip multiple tests, i.e. `-fg` to skip the d
 
 ### Submitting JSON Results
 
-Results from running this script can be sent to your benchmark results website of choice in JSON format. Invoke the `-j` flag and pass the URL to where the results should be submitted to:
+Results from running this script can be sent to your benchmark results website of choice in JSON format. Invoke the `-s` flag and pass the URL to where the results should be submitted to:
 
 ```
-curl -sL yabs.sh | bash -s -- -j "https://example.com/yabs/post"
+curl -sL yabs.sh | bash -s -- -s "https://example.com/yabs/post"
 ```
 
+JSON results can be sent to multiple endpoints by entering each site joined by a comma (e.g. "https://example.com/yabs/post,http://example.com/yabs2/post").
+
 A list of websites supporting acceptance of YABS JSON results will be posted here (when available). Example JSON output: [example.json](bin/example.json).
 
 ## Tests Conducted
diff --git a/bin/example.json b/bin/example.json
index 80a542f..8da17af 100644
--- a/bin/example.json
+++ b/bin/example.json
@@ -1,34 +1,89 @@
 {
-	"version": "v2022-08-15",
-	"arch": "x64",
-	"ipv4": true,
-	"ipv6": false,
-	"uptime": 3916629.77,
+	"version": "v2022-08-17",
+	"time": "20220817-035033",
+	"os": {
+		"arch": "x64",
+		"distro": "Ubuntu 20.04.4 LTS",
+		"kernel": "5.4.0-120-generic",
+		"uptime": 4089127.72
+	},
+	"net": {
+		"ipv4": true,
+		"ipv6": false
+	},
 	"cpu": {
 		"model": "Intel(R) Core(TM) i5-10400 CPU @ 2.90GHz",
 		"cores": 12,
-		"freq": "4000.093 MHz"
+		"freq": "4000.089 MHz",
+		"aes": true,
+		"virt": true
 	},
-	"aes": true,
-	"virt": true,
-	"ram": 32720272,
-	"swap": 41904120,
-	"disk": 47170290544,
-	"distro": "Ubuntu 20.04.4 LTS",
-	"kernel": "5.4.0-120-generic",
-	"fio": [
-		["4k", 154305, 38576, 154712, 38678, 309017, 77254],
-		["64k", 210851, 3294, 211961, 3311, 422812, 6605],
-		["512k", 222221, 434, 234028, 457, 456249, 891],
-		["1m", 227198, 221, 242330, 236, 469528, 457]
-	],
-	"iperf": [
-		["IPv4", "Clouvider", "London, UK (10G)", "128 Mbits/sec", "65.4 Mbits/sec"],
-		["IPv4", "Online.net", "Paris, FR (10G)", "116 Mbits/sec", "busy "],
-		["IPv4", "Clouvider", "NYC, NY, US (10G)", "140 Mbits/sec", "97.1 Mbits/sec"]
-	],
-	"geekbench": [
-		[4, 5449, 24198, "https://browser.geekbench.com/v4/cpu/16602397"],
-		[5, 1170, 5999, "https://browser.geekbench.com/v5/cpu/16636699"]
-	]
+	"mem": {
+		"ram": 32720272,
+		"swap": 41904120,
+		"disk": 47170290544
+	},
+	"fio": [{
+		"bs": "4k",
+		"speed_r": 165590,
+		"iops_r": 41397,
+		"speed_w": 166027,
+		"iops_w": 41506,
+		"speed_rw": 331617,
+		"iops_rw": 82903
+	}, {
+		"bs": "64k",
+		"speed_r": 198505,
+		"iops_r": 3101,
+		"speed_w": 199549,
+		"iops_w": 3117,
+		"speed_rw": 398054,
+		"iops_rw": 6218
+	}, {
+		"bs": "512k",
+		"speed_r": 227239,
+		"iops_r": 443,
+		"speed_w": 239313,
+		"iops_w": 467,
+		"speed_rw": 466552,
+		"iops_rw": 910
+	}, {
+		"bs": "1m",
+		"speed_r": 238296,
+		"iops_r": 232,
+		"speed_w": 254166,
+		"iops_w": 248,
+		"speed_rw": 492462,
+		"iops_rw": 480
+	}],
+	"iperf": [{
+		"mode": "IPv4",
+		"provider": "Clouvider",
+		"loc": "London, UK (10G)",
+		"send": "122 Mbits/sec",
+		"recv": "58.5 Mbits/sec"
+	}, {
+		"mode": "IPv4",
+		"provider": "Online.net",
+		"loc": "Paris, FR (10G)",
+		"send": "111 Mbits/sec",
+		"recv": "busy "
+	}, {
+		"mode": "IPv4",
+		"provider": "Clouvider",
+		"loc": "NYC, NY, US (10G)",
+		"send": "129 Mbits/sec",
+		"recv": "107 Mbits/sec"
+	}],
+	"geekbench": [{
+		"version": 4,
+		"single": 5443,
+		"multi": 24535,
+		"url": "https://browser.geekbench.com/v4/cpu/16603522"
+	}, {
+		"version": 5,
+		"single": 1157,
+		"multi": 5908,
+		"url": "https://browser.geekbench.com/v5/cpu/16679843"
+	}]
 }
diff --git a/yabs.sh b/yabs.sh
index dc0b2ad..8d81a29 100755
--- a/yabs.sh
+++ b/yabs.sh
@@ -12,7 +12,7 @@
 #             performance via fio. The script is designed to not require any dependencies
 #             - either compiled or installed - nor admin privileges to run.
 #
-YABS_VERSION="v2022-08-15"
+YABS_VERSION="v2022-08-17"
 
 echo -e '# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #'
 echo -e '#              Yet-Another-Bench-Script              #'
@@ -22,6 +22,7 @@ echo -e '# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #'
 
 echo -e
 date
+TIME_START=$(date '+%Y%m%d-%H%M%S')
 
 # override locale to eliminate parsing errors (i.e. using commas as delimiters rather than periods)
 if locale -a | grep ^C$ > /dev/null ; then
@@ -57,11 +58,11 @@ else
 fi
 
 # flags to skip certain performance tests
-unset PREFER_BIN SKIP_FIO SKIP_IPERF SKIP_GEEKBENCH PRINT_HELP REDUCE_NET GEEKBENCH_4 GEEKBENCH_5 DD_FALLBACK IPERF_DL_FAIL JSON_SEND JSON_RESULT
+unset PREFER_BIN SKIP_FIO SKIP_IPERF SKIP_GEEKBENCH PRINT_HELP REDUCE_NET GEEKBENCH_4 GEEKBENCH_5 DD_FALLBACK IPERF_DL_FAIL JSON JSON_SEND JSON_RESULT
 GEEKBENCH_5="True" # gb5 test enabled by default
 
 # get any arguments that were passed to the script and set the associated skip flags (if applicable)
-while getopts 'bfdighr49j:' flag; do
+while getopts 'bfdighr49jws:' flag; do
 	case "${flag}" in
 		b) PREFER_BIN="True" ;;
 		f) SKIP_FIO="True" ;;
@@ -72,7 +73,9 @@ while getopts 'bfdighr49j:' flag; do
 		r) REDUCE_NET="True" ;;
 		4) GEEKBENCH_4="True" && unset GEEKBENCH_5 ;;
 		9) GEEKBENCH_4="True" && GEEKBENCH_5="True" ;;
-		j) JSON_SEND=${OPTARG} ;; 
+		j) JSON+="j" ;; 
+		w) JSON+="w" ;;
+		s) JSON+="s" && JSON_SEND=${OPTARG} ;; 
 		*) exit 1 ;;
 	esac
 done
@@ -98,9 +101,9 @@ if [ ! -z "$PRINT_HELP" ]; then
 	echo -e
 	echo -e "Usage: ./yabs.sh [-flags]"
 	echo -e "       curl -sL yabs.sh | bash"
-	echo -e "       curl -sL yabs.sh | bash -s -- -{bfdighr49j}"
+	echo -e "       curl -sL yabs.sh | bash -s -- -flags"
 	echo -e "       wget -qO- yabs.sh | bash"
-	echo -e "       wget -qO- yabs.sh | bash -s -- -{bfdighr49j}"
+	echo -e "       wget -qO- yabs.sh | bash -s -- -flags"
 	echo -e
 	echo -e "Flags:"
 	echo -e "       -b : prefer pre-compiled binaries from repo over local packages"
@@ -114,7 +117,9 @@ if [ ! -z "$PRINT_HELP" ]; then
 	echo -e "            to lessen bandwidth usage"
 	echo -e "       -4 : use geekbench 4 instead of geekbench 5"
 	echo -e "       -9 : use both geekbench 4 AND geekbench 5"
-	echo -e "       -j <url> : send jsonified YABS results to URL"
+	echo -e "       -j : print jsonified YABS results at conclusion of test"
+	echo -e "       -w : write jsonified YABS results to disk"
+	echo -e "       -s <url> : send jsonified YABS results to URL"
 	echo -e
 	echo -e "Detected Arch: $ARCH"
 	echo -e
@@ -141,9 +146,11 @@ if [ ! -z "$PRINT_HELP" ]; then
 	[[ ! -z $IPV6_CHECK ]] && echo -e "       IPv6 connected" ||
 		echo -e "       IPv6 not connected"
 	echo -e
-	echo -e "Sending JSON Results:"
-	[[ ! -z $JSON_SEND ]] && echo -e "       TRUE ($JSON_SEND)" ||
-		echo -e "       FALSE"
+	echo -e "JSON Options:"
+	[[ -z $JSON ]] && echo -e "       none"
+	[[ $JSON = *j* ]] && echo -e "       printing json to screen after test"
+	[[ $JSON = *w* ]] && echo -e "       writing json to file after test"
+	[[ $JSON = *s* ]] && echo -e "       sharing json YABS results to $JSON_SEND" 
 	echo -e
 	echo -e "Exiting..."
 
@@ -232,15 +239,15 @@ echo -e "Distro     : $DISTRO"
 KERNEL=$(uname -r)
 echo -e "Kernel     : $KERNEL"
 
-if [ ! -z $JSON_SEND ]; then
+if [ ! -z $JSON ]; then
 	UPTIME_S=$(awk '{print $1}' /proc/uptime)
 	IPV4=$([ ! -z $IPV4_CHECK ] && echo "true" || echo "false")
 	IPV6=$([ ! -z $IPV6_CHECK ] && echo "true" || echo "false")
 	AES=$([[ "$CPU_AES" = *Enabled* ]] && echo "true" || echo "false")
 	VIRT=$([[ "$CPU_VIRT" = *Enabled* ]] && echo "true" || echo "false")
-	JSON_RESULT='{"version":"'$YABS_VERSION'","arch":"'$ARCH'","ipv4":'$IPV4',"ipv6":'$IPV6',"uptime":'$UPTIME_S',"cpu":{"model":"'$CPU_PROC'"'
-	JSON_RESULT+=',"cores":'$CPU_CORES',"freq":"'$CPU_FREQ'"},"aes":'$AES',"virt":'$VIRT',"ram":'$TOTAL_RAM_RAW',"swap":'$TOTAL_SWAP_RAW','
-	JSON_RESULT+='"disk":'$TOTAL_DISK_RAW',"distro":"'$DISTRO'","kernel":"'$KERNEL'"'
+	JSON_RESULT='{"version":"'$YABS_VERSION'","time":"'$TIME_START'","os":{"arch":"'$ARCH'","distro":"'$DISTRO'","kernel":"'$KERNEL'",'
+	JSON_RESULT+='"uptime":'$UPTIME_S'},"net":{"ipv4":'$IPV4',"ipv6":'$IPV6'},"cpu":{"model":"'$CPU_PROC'","cores":'$CPU_CORES','
+	JSON_RESULT+='"freq":"'$CPU_FREQ'","aes":'$AES',"virt":'$VIRT'},"mem":{"ram":'$TOTAL_RAM_RAW',"swap":'$TOTAL_SWAP_RAW',"disk":'$TOTAL_DISK_RAW'}'
 fi
 
 # create a directory in the same location that the script is being run to temporarily store YABS-related files
@@ -542,7 +549,7 @@ elif [ -z "$SKIP_FIO" ]; then
 		printf "%-6s | %-11s | %-11s | %-11s | %-6.2f %-4s\n" "Write" "${DISK_WRITE_TEST_RES[0]}" "${DISK_WRITE_TEST_RES[1]}" "${DISK_WRITE_TEST_RES[2]}" "${DISK_WRITE_TEST_AVG}" "${DISK_WRITE_TEST_UNIT}" 
 		printf "%-6s | %-11s | %-11s | %-11s | %-6.2f %-4s\n" "Read" "${DISK_READ_TEST_RES[0]}" "${DISK_READ_TEST_RES[1]}" "${DISK_READ_TEST_RES[2]}" "${DISK_READ_TEST_AVG}" "${DISK_READ_TEST_UNIT}" 
 	else # fio tests completed successfully, print results
-		[[ ! -z $JSON_SEND ]] && JSON_RESULT+=',"fio":['
+		[[ ! -z $JSON ]] && JSON_RESULT+=',"fio":['
 		DISK_RESULTS_NUM=$(expr ${#DISK_RESULTS[@]} / 6)
 		DISK_COUNT=0
 
@@ -557,15 +564,17 @@ elif [ -z "$SKIP_FIO" ]; then
 			printf "%-10s | %-11s %8s | %-11s %8s\n" "Read" "${DISK_RESULTS[DISK_COUNT*6+1]}" "(${DISK_RESULTS[DISK_COUNT*6+4]})" "${DISK_RESULTS[(DISK_COUNT+1)*6+1]}" "(${DISK_RESULTS[(DISK_COUNT+1)*6+4]})"
 			printf "%-10s | %-11s %8s | %-11s %8s\n" "Write" "${DISK_RESULTS[DISK_COUNT*6+2]}" "(${DISK_RESULTS[DISK_COUNT*6+5]})" "${DISK_RESULTS[(DISK_COUNT+1)*6+2]}" "(${DISK_RESULTS[(DISK_COUNT+1)*6+5]})"
 			printf "%-10s | %-11s %8s | %-11s %8s\n" "Total" "${DISK_RESULTS[DISK_COUNT*6]}" "(${DISK_RESULTS[DISK_COUNT*6+3]})" "${DISK_RESULTS[(DISK_COUNT+1)*6]}" "(${DISK_RESULTS[(DISK_COUNT+1)*6+3]})"
-			if [ ! -z $JSON_SEND ]; then
-				JSON_RESULT+='["'${BLOCK_SIZES[DISK_COUNT]}'",'${DISK_RESULTS_RAW[DISK_COUNT*6+1]}','${DISK_RESULTS_RAW[DISK_COUNT*6+4]}','${DISK_RESULTS_RAW[DISK_COUNT*6+2]}
-				JSON_RESULT+=','${DISK_RESULTS_RAW[DISK_COUNT*6+5]}','${DISK_RESULTS_RAW[DISK_COUNT*6]}','${DISK_RESULTS_RAW[DISK_COUNT*6+3]}'],'
-				JSON_RESULT+='["'${BLOCK_SIZES[DISK_COUNT+1]}'",'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+1]}','${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+4]}','${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+2]}
-				JSON_RESULT+=','${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+5]}','${DISK_RESULTS_RAW[(DISK_COUNT+1)*6]}','${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+3]}'],'
+			if [ ! -z $JSON ]; then
+				JSON_RESULT+='{"bs":"'${BLOCK_SIZES[DISK_COUNT]}'","speed_r":'${DISK_RESULTS_RAW[DISK_COUNT*6+1]}',"iops_r":'${DISK_RESULTS_RAW[DISK_COUNT*6+4]}
+				JSON_RESULT+=',"speed_w":'${DISK_RESULTS_RAW[DISK_COUNT*6+2]}',"iops_w":'${DISK_RESULTS_RAW[DISK_COUNT*6+5]}',"speed_rw":'${DISK_RESULTS_RAW[DISK_COUNT*6]}
+				JSON_RESULT+=',"iops_rw":'${DISK_RESULTS_RAW[DISK_COUNT*6+3]}'},'
+				JSON_RESULT+='{"bs":"'${BLOCK_SIZES[DISK_COUNT+1]}'","speed_r":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+1]}',"iops_r":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+4]}
+				JSON_RESULT+=',"speed_w":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+2]}',"iops_w":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+5]}',"speed_rw":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6]}
+				JSON_RESULT+=',"iops_rw":'${DISK_RESULTS_RAW[(DISK_COUNT+1)*6+3]}'},'
 			fi
 			DISK_COUNT=$(expr $DISK_COUNT + 2)
 		done
-		[[ ! -z $JSON_SEND ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
+		[[ ! -z $JSON ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
 	fi
 fi
 
@@ -674,8 +683,9 @@ function launch_iperf {
 			[[ -z $IPERF_RECVRESULT_VAL || "$IPERF_RECVRESULT_VAL" == *"0.00"* ]] && IPERF_RECVRESULT_VAL="busy" && IPERF_RECVRESULT_UNIT=""
 			# print the speed results for the iperf location currently being evaluated
 			printf "%-15s | %-25s | %-15s | %-15s\n" "${IPERF_LOCS[i*5+2]}" "${IPERF_LOCS[i*5+3]}" "$IPERF_SENDRESULT_VAL $IPERF_SENDRESULT_UNIT" "$IPERF_RECVRESULT_VAL $IPERF_RECVRESULT_UNIT"
-			if [ ! -z $JSON_SEND ]; then
-				JSON_RESULT+='["'$MODE'","'${IPERF_LOCS[i*5+2]}'","'${IPERF_LOCS[i*5+3]}'","'$IPERF_SENDRESULT_VAL' '$IPERF_SENDRESULT_UNIT'","'$IPERF_RECVRESULT_VAL' '$IPERF_RECVRESULT_UNIT'"],'
+			if [ ! -z $JSON ]; then
+				JSON_RESULT+='{"mode":"'$MODE'","provider":"'${IPERF_LOCS[i*5+2]}'","loc":"'${IPERF_LOCS[i*5+3]}
+				JSON_RESULT+='","send":"'$IPERF_SENDRESULT_VAL' '$IPERF_SENDRESULT_UNIT'","recv":"'$IPERF_RECVRESULT_VAL' '$IPERF_RECVRESULT_UNIT'"},'
 			fi
 		fi
 	done
@@ -740,12 +750,12 @@ if [ -z "$SKIP_IPERF" ]; then
 	IPERF_LOCS_NUM=$((IPERF_LOCS_NUM / 5))
 	
 	if [ -z "$IPERF_DL_FAIL" ]; then
-		[[ ! -z $JSON_SEND ]] && JSON_RESULT+=',"iperf":['
+		[[ ! -z $JSON ]] && JSON_RESULT+=',"iperf":['
 		# check if the host has IPv4 connectivity, if so, run iperf3 IPv4 tests
 		[ ! -z "$IPV4_CHECK" ] && launch_iperf "IPv4"
 		# check if the host has IPv6 connectivity, if so, run iperf3 IPv6 tests
 		[ ! -z "$IPV6_CHECK" ] && launch_iperf "IPv6"
-		[[ ! -z $JSON_SEND ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
+		[[ ! -z $JSON ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
 	else
 		echo -e "\niperf3 binary download failed. Skipping iperf network tests..."
 	fi
@@ -847,8 +857,9 @@ function launch_geekbench {
 		printf "%-15s | %-30s\n" "Multi Core" "$GEEKBENCH_SCORES_MULTI"
 		printf "%-15s | %-30s\n" "Full Test" "$GEEKBENCH_URL"
 
-		if [ ! -z $JSON_SEND ]; then
-			JSON_RESULT+='['$VERSION','$GEEKBENCH_SCORES_SINGLE','$GEEKBENCH_SCORES_MULTI',"'$GEEKBENCH_URL'"],'
+		if [ ! -z $JSON ]; then
+			JSON_RESULT+='{"version":'$VERSION',"single":'$GEEKBENCH_SCORES_SINGLE',"multi":'$GEEKBENCH_SCORES_MULTI
+			JSON_RESULT+=',"url":"'$GEEKBENCH_URL'"},'
 		fi
 
 		# write the geekbench claim URL to a file so the user can add the results to their profile (if desired)
@@ -858,7 +869,7 @@ function launch_geekbench {
 
 # if the skip geekbench flag was set, skip the system performance test, otherwise test system performance
 if [ -z "$SKIP_GEEKBENCH" ]; then
-	[[ ! -z $JSON_SEND ]] && JSON_RESULT+=',"geekbench":['
+	[[ ! -z $JSON ]] && JSON_RESULT+=',"geekbench":['
 	if [[ $GEEKBENCH_4 == *True* ]]; then
 		launch_geekbench 4
 	fi
@@ -866,21 +877,38 @@ if [ -z "$SKIP_GEEKBENCH" ]; then
 	if [[ $GEEKBENCH_5 == *True* ]]; then
 		launch_geekbench 5
 	fi
-	[[ ! -z $JSON_SEND ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
+	[[ ! -z $JSON ]] && JSON_RESULT=${JSON_RESULT::${#JSON_RESULT}-1} && JSON_RESULT+=']'
 fi
 
 # finished all tests, clean up all YABS files and exit
 echo -e
 rm -rf $YABS_PATH
 
-# send json results
-if [ ! -z $JSON_SEND ]; then
+if [[ ! -z $JSON ]]; then
 	JSON_RESULT+='}'
 
-	if [[ ! -z $LOCAL_CURL ]]; then
-		curl -s -H "Content-Type:application/json" -X POST --data ''"$JSON_RESULT"'' $JSON_SEND
-	else
-		wget -qO- --post-data=''"$JSON_RESULT"'' --header='Content-Type:application/json' $JSON_SEND
+	# write json results to file
+	if [[ $JSON = *w* ]]; then
+		echo $JSON_RESULT > yabs_$TIME_START.json
+	fi
+
+	# send json results
+	if [[ $JSON = *s* ]]; then
+		IFS=',' read -r -a JSON_SITES <<< "$JSON_SEND"
+		for JSON_SITE in "${JSON_SITES[@]}"
+		do
+			if [[ ! -z $LOCAL_CURL ]]; then
+				curl -s -H "Content-Type:application/json" -X POST --data ''"$JSON_RESULT"'' $JSON_SITE
+			else
+				wget -qO- --post-data=''"$JSON_RESULT"'' --header='Content-Type:application/json' $JSON_SITE
+			fi
+		done
+	fi
+
+	# print json result to screen
+	if [[ $JSON = *j* ]]; then
+		echo -e
+		echo $JSON_RESULT
 	fi
 fi