# SPDX-License-Identifier: GPL-2.0-only ################################################################################ # # r8125 is the Linux device driver released for Realtek 2.5 Gigabit Ethernet # controllers with PCI-Express interface. # # Copyright(c) 2024 Realtek Semiconductor Corp. All rights reserved. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the Free # Software Foundation; either version 2 of the License, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. # # You should have received a copy of the GNU General Public License along with # this program; if not, see . # # Author: # Realtek NIC software team # No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan # ################################################################################ ################################################################################ # This product is covered by one or more of the following patents: # US6,570,884, US6,115,776, and US6,327,625. ################################################################################ CONFIG_SOC_LAN = n ENABLE_REALWOW_SUPPORT = n ENABLE_DASH_SUPPORT = n ENABLE_DASH_PRINTER_SUPPORT = n CONFIG_DOWN_SPEED_100 = n CONFIG_ASPM = y ENABLE_S5WOL = y ENABLE_S5_KEEP_CURR_MAC = y ENABLE_EEE = y ENABLE_S0_MAGIC_PACKET = n ENABLE_TX_NO_CLOSE = y ENABLE_MULTIPLE_TX_QUEUE = y ENABLE_PTP_SUPPORT = n ENABLE_PTP_MASTER_MODE = n ENABLE_RSS_SUPPORT = y ENABLE_LIB_SUPPORT = n ENABLE_USE_FIRMWARE_FILE = n DISABLE_WOL_SUPPORT = n DISABLE_MULTI_MSIX_VECTOR = n ENABLE_DOUBLE_VLAN = n ENABLE_PAGE_REUSE = n ENABLE_RX_PACKET_FRAGMENT = n ifneq ($(KERNELRELEASE),) obj-m := r8125.o r8125-objs := r8125_n.o rtl_eeprom.o rtltool.o ifeq ($(CONFIG_SOC_LAN), y) EXTRA_CFLAGS += -DCONFIG_SOC_LAN endif ifeq ($(ENABLE_REALWOW_SUPPORT), y) r8125-objs += r8125_realwow.o EXTRA_CFLAGS += -DENABLE_REALWOW_SUPPORT endif ifeq ($(ENABLE_DASH_SUPPORT), y) r8125-objs += r8125_dash.o EXTRA_CFLAGS += -DENABLE_DASH_SUPPORT endif ifeq ($(ENABLE_DASH_PRINTER_SUPPORT), y) r8125-objs += r8125_dash.o EXTRA_CFLAGS += -DENABLE_DASH_SUPPORT -DENABLE_DASH_PRINTER_SUPPORT endif EXTRA_CFLAGS += -DCONFIG_R8125_NAPI EXTRA_CFLAGS += -DCONFIG_R8125_VLAN ifeq ($(CONFIG_DOWN_SPEED_100), y) EXTRA_CFLAGS += -DCONFIG_DOWN_SPEED_100 endif ifeq ($(CONFIG_ASPM), y) EXTRA_CFLAGS += -DCONFIG_ASPM endif ifeq ($(ENABLE_S5WOL), y) EXTRA_CFLAGS += -DENABLE_S5WOL endif ifeq ($(ENABLE_S5_KEEP_CURR_MAC), y) EXTRA_CFLAGS += -DENABLE_S5_KEEP_CURR_MAC endif ifeq ($(ENABLE_EEE), y) EXTRA_CFLAGS += -DENABLE_EEE endif ifeq ($(ENABLE_S0_MAGIC_PACKET), y) EXTRA_CFLAGS += -DENABLE_S0_MAGIC_PACKET endif ifeq ($(ENABLE_TX_NO_CLOSE), y) EXTRA_CFLAGS += -DENABLE_TX_NO_CLOSE endif ifeq ($(ENABLE_MULTIPLE_TX_QUEUE), y) EXTRA_CFLAGS += -DENABLE_MULTIPLE_TX_QUEUE endif ifeq ($(ENABLE_PTP_SUPPORT), y) r8125-objs += r8125_ptp.o EXTRA_CFLAGS += -DENABLE_PTP_SUPPORT endif ifeq ($(ENABLE_PTP_MASTER_MODE), y) EXTRA_CFLAGS += -DENABLE_PTP_MASTER_MODE endif ifeq ($(ENABLE_RSS_SUPPORT), y) r8125-objs += r8125_rss.o EXTRA_CFLAGS += -DENABLE_RSS_SUPPORT endif ifeq ($(ENABLE_LIB_SUPPORT), y) r8125-objs += r8125_lib.o EXTRA_CFLAGS += -DENABLE_LIB_SUPPORT endif ifeq ($(ENABLE_USE_FIRMWARE_FILE), y) r8125-objs += r8125_firmware.o EXTRA_CFLAGS += -DENABLE_USE_FIRMWARE_FILE endif ifeq ($(DISABLE_WOL_SUPPORT), y) EXTRA_CFLAGS += -DDISABLE_WOL_SUPPORT endif ifeq ($(DISABLE_MULTI_MSIX_VECTOR), y) EXTRA_CFLAGS += -DDISABLE_MULTI_MSIX_VECTOR endif ifeq ($(ENABLE_DOUBLE_VLAN), y) EXTRA_CFLAGS += -DENABLE_DOUBLE_VLAN endif ifeq ($(ENABLE_PAGE_REUSE), y) EXTRA_CFLAGS += -DENABLE_PAGE_REUSE endif ifeq ($(ENABLE_RX_PACKET_FRAGMENT), y) EXTRA_CFLAGS += -DENABLE_RX_PACKET_FRAGMENT endif else BASEDIR := /lib/modules/$(shell uname -r) KERNELDIR ?= $(BASEDIR)/build PWD :=$(shell pwd) DRIVERDIR := $(shell find $(BASEDIR)/kernel/drivers/net/ethernet -name realtek -type d) ifeq ($(DRIVERDIR),) DRIVERDIR := $(shell find $(BASEDIR)/kernel/drivers/net -name realtek -type d) endif ifeq ($(DRIVERDIR),) DRIVERDIR := $(BASEDIR)/kernel/drivers/net endif RTKDIR := $(subst $(BASEDIR)/,,$(DRIVERDIR)) KERNEL_GCC_VERSION := $(shell cat /proc/version | sed -n 's/.*gcc version \([[:digit:]]\.[[:digit:]]\.[[:digit:]]\).*/\1/p') CCVERSION = $(shell $(CC) -dumpversion) KVER = $(shell uname -r) KMAJ = $(shell echo $(KVER) | \ sed -e 's/^\([0-9][0-9]*\)\.[0-9][0-9]*\.[0-9][0-9]*.*/\1/') KMIN = $(shell echo $(KVER) | \ sed -e 's/^[0-9][0-9]*\.\([0-9][0-9]*\)\.[0-9][0-9]*.*/\1/') KREV = $(shell echo $(KVER) | \ sed -e 's/^[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*/\1/') kver_ge = $(shell \ echo test | awk '{if($(KMAJ) < $(1)) {print 0} else { \ if($(KMAJ) > $(1)) {print 1} else { \ if($(KMIN) < $(2)) {print 0} else { \ if($(KMIN) > $(2)) {print 1} else { \ if($(KREV) < $(3)) {print 0} else { print 1 } \ }}}}}' \ ) .PHONY: all all: print_vars clean modules install print_vars: @echo @echo "CC: " $(CC) @echo "CCVERSION: " $(CCVERSION) @echo "KERNEL_GCC_VERSION: " $(KERNEL_GCC_VERSION) @echo "KVER: " $(KVER) @echo "KMAJ: " $(KMAJ) @echo "KMIN: " $(KMIN) @echo "KREV: " $(KREV) @echo "BASEDIR: " $(BASEDIR) @echo "DRIVERDIR: " $(DRIVERDIR) @echo "PWD: " $(PWD) @echo "RTKDIR: " $(RTKDIR) @echo .PHONY:modules modules: #ifeq ($(call kver_ge,5,0,0),1) $(MAKE) -C $(KERNELDIR) M=$(PWD) modules #else # $(MAKE) -C $(KERNELDIR) SUBDIRS=$(PWD) modules #endif .PHONY:clean clean: #ifeq ($(call kver_ge,5,0,0),1) $(MAKE) -C $(KERNELDIR) M=$(PWD) clean #else # $(MAKE) -C $(KERNELDIR) SUBDIRS=$(PWD) clean #endif .PHONY:install install: #ifeq ($(call kver_ge,5,0,0),1) $(MAKE) -C $(KERNELDIR) M=$(PWD) INSTALL_MOD_DIR=$(RTKDIR) modules_install #else # $(MAKE) -C $(KERNELDIR) SUBDIRS=$(PWD) INSTALL_MOD_DIR=$(RTKDIR) modules_install #endif endif