linux_dsm_epyc7002/drivers/mtd/maps/gpio-addr-flash.c
Ricardo Ribalda Delgado 299b43535d mtd: maps: gpio-addr-flash: Convert to gpiod
Convert from legacy gpio API to gpiod.
Board files will have to use gpiod_lookup_tables.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08 21:32:58 +02:00

282 lines
7.2 KiB
C

/*
* drivers/mtd/maps/gpio-addr-flash.c
*
* Handle the case where a flash device is mostly addressed using physical
* line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
* to a 2MiB memory range and use the GPIOs to select a particular range.
*
* Copyright © 2000 Nicolas Pitre <nico@cam.org>
* Copyright © 2005-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#define win_mask(x) ((BIT(x)) - 1)
#define DRIVER_NAME "gpio-addr-flash"
/**
* struct async_state - keep GPIO flash state
* @mtd: MTD state for this mapping
* @map: MTD map state for this flash
* @gpios: Struct containing the array of GPIO descriptors
* @gpio_values: cached GPIO values
* @win_order: dedicated memory size (if no GPIOs)
*/
struct async_state {
struct mtd_info *mtd;
struct map_info map;
struct gpio_descs *gpios;
unsigned int gpio_values;
unsigned int win_order;
};
#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
/**
* gf_set_gpios() - set GPIO address lines to access specified flash offset
* @state: GPIO flash state
* @ofs: desired offset to access
*
* Rather than call the GPIO framework every time, cache the last-programmed
* value. This speeds up sequential accesses (which are by far the most common
* type).
*/
static void gf_set_gpios(struct async_state *state, unsigned long ofs)
{
int i;
ofs >>= state->win_order;
if (ofs == state->gpio_values)
return;
for (i = 0; i < state->gpios->ndescs; i++) {
if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
continue;
gpiod_set_value(state->gpios->desc[i], !!(ofs & BIT(i)));
}
state->gpio_values = ofs;
}
/**
* gf_read() - read a word at the specified offset
* @map: MTD map state
* @ofs: desired offset to read
*/
static map_word gf_read(struct map_info *map, unsigned long ofs)
{
struct async_state *state = gf_map_info_to_state(map);
uint16_t word;
map_word test;
gf_set_gpios(state, ofs);
word = readw(map->virt + (ofs & win_mask(state->win_order)));
test.x[0] = word;
return test;
}
/**
* gf_copy_from() - copy a chunk of data from the flash
* @map: MTD map state
* @to: memory to copy to
* @from: flash offset to copy from
* @len: how much to copy
*
* The "from" region may straddle more than one window, so toggle the GPIOs for
* each window region before reading its data.
*/
static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
{
struct async_state *state = gf_map_info_to_state(map);
int this_len;
while (len) {
this_len = from & win_mask(state->win_order);
this_len = BIT(state->win_order) - this_len;
this_len = min_t(int, len, this_len);
gf_set_gpios(state, from);
memcpy_fromio(to,
map->virt + (from & win_mask(state->win_order)),
this_len);
len -= this_len;
from += this_len;
to += this_len;
}
}
/**
* gf_write() - write a word at the specified offset
* @map: MTD map state
* @ofs: desired offset to write
*/
static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
{
struct async_state *state = gf_map_info_to_state(map);
uint16_t d;
gf_set_gpios(state, ofs);
d = d1.x[0];
writew(d, map->virt + (ofs & win_mask(state->win_order)));
}
/**
* gf_copy_to() - copy a chunk of data to the flash
* @map: MTD map state
* @to: flash offset to copy to
* @from: memory to copy from
* @len: how much to copy
*
* See gf_copy_from() caveat.
*/
static void gf_copy_to(struct map_info *map, unsigned long to,
const void *from, ssize_t len)
{
struct async_state *state = gf_map_info_to_state(map);
int this_len;
while (len) {
this_len = to & win_mask(state->win_order);
this_len = BIT(state->win_order) - this_len;
this_len = min_t(int, len, this_len);
gf_set_gpios(state, to);
memcpy_toio(map->virt + (to & win_mask(state->win_order)),
from, len);
len -= this_len;
to += this_len;
from += this_len;
}
}
static const char * const part_probe_types[] = {
"cmdlinepart", "RedBoot", NULL };
/**
* gpio_flash_probe() - setup a mapping for a GPIO assisted flash
* @pdev: platform device
*
* The platform resource layout expected looks something like:
* struct mtd_partition partitions[] = { ... };
* struct physmap_flash_data flash_data = { ... };
* static struct gpiod_lookup_table addr_flash_gpios = {
* .dev_id = "gpio-addr-flash.0",
* .table = {
* GPIO_LOOKUP_IDX("gpio.0", 15, "addr", 0, GPIO_ACTIVE_HIGH),
* GPIO_LOOKUP_IDX("gpio.0", 16, "addr", 1, GPIO_ACTIVE_HIGH),
* );
* };
* gpiod_add_lookup_table(&addr_flash_gpios);
*
* struct resource flash_resource[] = {
* {
* .name = "cfi_probe",
* .start = 0x20000000,
* .end = 0x201fffff,
* .flags = IORESOURCE_MEM,
* },
* };
* struct platform_device flash_device = {
* .name = "gpio-addr-flash",
* .dev = { .platform_data = &flash_data, },
* .num_resources = ARRAY_SIZE(flash_resource),
* .resource = flash_resource,
* ...
* };
*/
static int gpio_flash_probe(struct platform_device *pdev)
{
struct physmap_flash_data *pdata;
struct resource *memory;
struct async_state *state;
pdata = dev_get_platdata(&pdev->dev);
memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!memory)
return -EINVAL;
state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
state->gpios = devm_gpiod_get_array(&pdev->dev, "addr", GPIOD_OUT_LOW);
if (IS_ERR(state->gpios))
return PTR_ERR(state->gpios);
state->win_order = get_bitmask_order(resource_size(memory)) - 1;
state->map.name = DRIVER_NAME;
state->map.read = gf_read;
state->map.copy_from = gf_copy_from;
state->map.write = gf_write;
state->map.copy_to = gf_copy_to;
state->map.bankwidth = pdata->width;
state->map.size = BIT(state->win_order + state->gpios->ndescs);
state->map.virt = devm_ioremap_resource(&pdev->dev, memory);
if (IS_ERR(state->map.virt))
return PTR_ERR(state->map.virt);
state->map.phys = NO_XIP;
state->map.map_priv_1 = (unsigned long)state;
platform_set_drvdata(pdev, state);
dev_notice(&pdev->dev, "probing %d-bit flash bus\n",
state->map.bankwidth * 8);
state->mtd = do_map_probe(memory->name, &state->map);
if (!state->mtd)
return -ENXIO;
state->mtd->dev.parent = &pdev->dev;
mtd_device_parse_register(state->mtd, part_probe_types, NULL,
pdata->parts, pdata->nr_parts);
return 0;
}
static int gpio_flash_remove(struct platform_device *pdev)
{
struct async_state *state = platform_get_drvdata(pdev);
mtd_device_unregister(state->mtd);
map_destroy(state->mtd);
return 0;
}
static struct platform_driver gpio_flash_driver = {
.probe = gpio_flash_probe,
.remove = gpio_flash_remove,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(gpio_flash_driver);
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
MODULE_LICENSE("GPL");