mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 02:36:49 +07:00
b993292f73
We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse the three nodes into one USB device node, reflecting the true nature of the hardware. Since we're here, we also mark the irq trigger flags correctly, as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
359 lines
6.9 KiB
Plaintext
359 lines
6.9 KiB
Plaintext
#include "qcom-apq8064-v2.0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
/ {
|
|
model = "Asus Nexus7(flo)";
|
|
compatible = "asus,nexus7-flo", "qcom,apq8064";
|
|
|
|
aliases {
|
|
serial0 = &gsbi7_serial;
|
|
serial1 = &gsbi6_serial;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
ramoops@88d00000{
|
|
compatible = "ramoops";
|
|
reg = <0x88d00000 0x100000>;
|
|
record-size = <0x00020000>;
|
|
console-size = <0x00020000>;
|
|
ftrace-size = <0x00020000>;
|
|
};
|
|
};
|
|
|
|
ext_3p3v: regulator-fixed@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "ext_3p3v";
|
|
regulator-type = "voltage";
|
|
startup-delay-us = <0>;
|
|
gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
volume_up {
|
|
label = "Volume Up";
|
|
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
volume_down {
|
|
label = "Volume Down";
|
|
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
rpm@108000 {
|
|
regulators {
|
|
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
|
|
vin_lvs1_3_6-supply = <&pm8921_s4>;
|
|
vin_lvs4_5_7-supply = <&pm8921_s4>;
|
|
|
|
|
|
vdd_l24-supply = <&pm8921_s1>;
|
|
vdd_l25-supply = <&pm8921_s1>;
|
|
vin_lvs2-supply = <&pm8921_s1>;
|
|
|
|
vdd_l26-supply = <&pm8921_s7>;
|
|
vdd_l27-supply = <&pm8921_s7>;
|
|
vdd_l28-supply = <&pm8921_s7>;
|
|
|
|
vdd_ncp-supply = <&pm8921_l6>;
|
|
|
|
/* Buck SMPS */
|
|
s1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
qcom,switch-mode-frequency = <3200000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
/* msm otg HSUSB_VDDCX */
|
|
s3 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
qcom,switch-mode-frequency = <4800000>;
|
|
};
|
|
|
|
/*
|
|
* msm_sdcc.1-sdc-vdd_io
|
|
* tabla2x-slim-CDC_VDDA_RX
|
|
* tabla2x-slim-CDC_VDDA_TX
|
|
* tabla2x-slim-CDC_VDD_CP
|
|
* tabla2x-slim-VDDIO_CDC
|
|
*/
|
|
s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
qcom,switch-mode-frequency = <3200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
s7 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
qcom,switch-mode-frequency = <3200000>;
|
|
};
|
|
|
|
/* mipi_dsi.1-dsi1_pll_vdda */
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* msm_otg-HSUSB_3p3 */
|
|
l3 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
/* msm_otg-HSUSB_1p8 */
|
|
l4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
/* msm_sdcc.1-sdc_vdd */
|
|
l5 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-always-on;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
/* mipi_dsi.1-dsi1_avdd */
|
|
l11 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
bias-pull-down;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* pwm_power for backlight */
|
|
l17 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* camera, qdsp6 */
|
|
l23 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
/*
|
|
* tabla2x-slim-CDC_VDDA_A_1P2V
|
|
* tabla2x-slim-VDDD_CDC_D
|
|
*/
|
|
l25 {
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs1 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs4 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs5 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs6 {
|
|
bias-pull-down;
|
|
};
|
|
/*
|
|
* mipi_dsi.1-dsi1_vddio
|
|
* pil_riva-pll_vdd
|
|
*/
|
|
lvs7 {
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdp@5100000 {
|
|
status = "okay";
|
|
ports {
|
|
port@1 {
|
|
mdp_dsi1_out: endpoint {
|
|
remote-endpoint = <&dsi0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi0: mdss_dsi@4700000 {
|
|
status = "okay";
|
|
vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
|
|
vdd-supply = <&pm8921_l8>;
|
|
vddio-supply = <&pm8921_lvs7>;
|
|
avdd-supply = <&pm8921_l11>;
|
|
vcss-supply = <&ext_3p3v>;
|
|
|
|
panel@0 {
|
|
reg = <0>;
|
|
compatible = "jdi,lt070me05000";
|
|
|
|
vddp-supply = <&pm8921_l17>;
|
|
iovcc-supply = <&pm8921_lvs7>;
|
|
|
|
enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
};
|
|
ports {
|
|
port@0 {
|
|
dsi0_in: endpoint {
|
|
remote-endpoint = <&mdp_dsi1_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
dsi0_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi-phy@4700200 {
|
|
status = "okay";
|
|
vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
|
|
};
|
|
|
|
gsbi@16200000 {
|
|
status = "okay";
|
|
qcom,mode = <GSBI_PROT_I2C>;
|
|
i2c@16280000 {
|
|
status = "okay";
|
|
clock-frequency = <200000>;
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
trackpad@10 {
|
|
compatible = "elan,ekth3500";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&tlmm_pinmux>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
gsbi@12440000 {
|
|
status = "okay";
|
|
qcom,mode = <GSBI_PROT_I2C>;
|
|
|
|
i2c@12460000 {
|
|
status = "okay";
|
|
clock-frequency = <200000>;
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
eeprom@52 {
|
|
compatible = "atmel,24c128";
|
|
reg = <0x52>;
|
|
pagesize = <32>;
|
|
};
|
|
|
|
bq27541@55 {
|
|
compatible = "ti,bq27541";
|
|
reg = <0x55>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
gsbi@16500000 {
|
|
status = "ok";
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
|
|
serial@16540000 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gsbi6_uart_4pins>;
|
|
};
|
|
};
|
|
|
|
gsbi@16600000 {
|
|
status = "ok";
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
serial@16640000 {
|
|
status = "ok";
|
|
};
|
|
};
|
|
|
|
/* OTG */
|
|
usb@12500000 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
ulpi {
|
|
phy {
|
|
v3p3-supply = <&pm8921_l3>;
|
|
v1p8-supply = <&pm8921_l4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
/* eMMC */
|
|
sdcc@12400000 {
|
|
status = "okay";
|
|
vmmc-supply = <&pm8921_l5>;
|
|
vqmmc-supply = <&pm8921_s4>;
|
|
};
|
|
};
|
|
|
|
imem@2a03f000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x2a03f000 0x1000>;
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x65c>;
|
|
|
|
mode-normal = <0x77665501>;
|
|
mode-bootloader = <0x77665500>;
|
|
mode-recovery = <0x77665502>;
|
|
};
|
|
};
|
|
};
|
|
};
|