linux_dsm_epyc7002/drivers/net/wireless/iwlwifi/iwl-fw.h
Johannes Berg 4ed735e759 iwlwifi: remove iwl_fw_valid_(tx|rx)_ant inlines
These inlines are pretty pointless now as they just return a
fixed struct value, remove them - the code even gets shorter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13 13:49:44 +02:00

300 lines
11 KiB
C

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#ifndef __iwl_fw_h__
#define __iwl_fw_h__
#include <linux/types.h>
#include <net/mac80211.h>
/**
* enum iwl_ucode_tlv_flag - ucode API flags
* @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
* was a separate TLV but moved here to save space.
* @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
* treats good CRC threshold as a boolean
* @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
* @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
* @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
* @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
* @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
* offload profile config command.
* @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api
* @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API.
* @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
* (rather than two) IPv6 addresses
* @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API
* @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
* from the probe request template.
* @IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping
* connection when going back to D0
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
* @IWL_UCODE_TLV_FLAGS_SCHED_SCAN: this uCode image supports scheduled scan.
* @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
* @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
* containing CAM (Continuous Active Mode) indication.
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in different bindings.
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
*/
enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
IWL_UCODE_TLV_FLAGS_NEWBT_COEX = BIT(5),
IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT = BIT(6),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8),
IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = BIT(9),
IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11),
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API = BIT(14),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
IWL_UCODE_TLV_FLAGS_SCHED_SCAN = BIT(17),
IWL_UCODE_TLV_FLAGS_STA_KEY_CMD = BIT(19),
IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD = BIT(20),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
};
/* The default calibrate table size if not specified by firmware file */
#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
/* The default max probe length if not specified by the firmware file */
#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
/**
* enum iwl_ucode_type
*
* The type of ucode.
*
* @IWL_UCODE_REGULAR: Normal runtime ucode
* @IWL_UCODE_INIT: Initial ucode
* @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode
*/
enum iwl_ucode_type {
IWL_UCODE_REGULAR,
IWL_UCODE_INIT,
IWL_UCODE_WOWLAN,
IWL_UCODE_TYPE_MAX,
};
/*
* enumeration of ucode section.
* This enumeration is used directly for older firmware (before 16.0).
* For new firmware, there can be up to 4 sections (see below) but the
* first one packaged into the firmware file is the DATA section and
* some debugging code accesses that.
*/
enum iwl_ucode_sec {
IWL_UCODE_SECTION_DATA,
IWL_UCODE_SECTION_INST,
};
/*
* For 16.0 uCode and above, there is no differentiation between sections,
* just an offset to the HW address.
*/
#define IWL_UCODE_SECTION_MAX 12
struct iwl_ucode_capabilities {
u32 max_probe_length;
u32 standard_phy_calibration_size;
u32 flags;
};
/* one for each uCode image (inst/data, init/runtime/wowlan) */
struct fw_desc {
const void *data; /* vmalloc'ed data */
u32 len; /* size in bytes */
u32 offset; /* offset in the device */
};
struct fw_img {
struct fw_desc sec[IWL_UCODE_SECTION_MAX];
bool is_secure;
bool is_dual_cpus;
};
/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
/*
* Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwl_tlv_calib_ctrl {
__le32 flow_trigger;
__le32 event_trigger;
} __packed;
enum iwl_fw_phy_cfg {
FW_PHY_CFG_RADIO_TYPE_POS = 0,
FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
FW_PHY_CFG_RADIO_STEP_POS = 2,
FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
FW_PHY_CFG_RADIO_DASH_POS = 4,
FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
FW_PHY_CFG_TX_CHAIN_POS = 16,
FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
FW_PHY_CFG_RX_CHAIN_POS = 20,
FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
};
#define IWL_UCODE_MAX_CS 1
/**
* struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
* @cipher: a cipher suite selector
* @flags: cipher scheme flags (currently reserved for a future use)
* @hdr_len: a size of MPDU security header
* @pn_len: a size of PN
* @pn_off: an offset of pn from the beginning of the security header
* @key_idx_off: an offset of key index byte in the security header
* @key_idx_mask: a bit mask of key_idx bits
* @key_idx_shift: bit shift needed to get key_idx
* @mic_len: mic length in bytes
* @hw_cipher: a HW cipher index used in host commands
*/
struct iwl_fw_cipher_scheme {
__le32 cipher;
u8 flags;
u8 hdr_len;
u8 pn_len;
u8 pn_off;
u8 key_idx_off;
u8 key_idx_mask;
u8 key_idx_shift;
u8 mic_len;
u8 hw_cipher;
} __packed;
/**
* struct iwl_fw_cscheme_list - a cipher scheme list
* @size: a number of entries
* @cs: cipher scheme entries
*/
struct iwl_fw_cscheme_list {
u8 size;
struct iwl_fw_cipher_scheme cs[];
} __packed;
/**
* struct iwl_fw - variables associated with the firmware
*
* @ucode_ver: ucode version from the ucode file
* @fw_version: firmware version string
* @img: ucode image like ucode_rt, ucode_init, ucode_wowlan.
* @ucode_capa: capabilities parsed from the ucode file.
* @enhance_sensitivity_table: device can do enhanced sensitivity.
* @init_evtlog_ptr: event log offset for init ucode.
* @init_evtlog_size: event log size for init ucode.
* @init_errlog_ptr: error log offfset for init ucode.
* @inst_evtlog_ptr: event log offset for runtime ucode.
* @inst_evtlog_size: event log size for runtime ucode.
* @inst_errlog_ptr: error log offfset for runtime ucode.
* @mvm_fw: indicates this is MVM firmware
* @cipher_scheme: optional external cipher scheme.
*/
struct iwl_fw {
u32 ucode_ver;
char fw_version[ETHTOOL_FWVERS_LEN];
/* ucode images */
struct fw_img img[IWL_UCODE_TYPE_MAX];
struct iwl_ucode_capabilities ucode_capa;
bool enhance_sensitivity_table;
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX];
u32 phy_config;
u8 valid_tx_ant;
u8 valid_rx_ant;
bool mvm_fw;
struct ieee80211_cipher_scheme cs[IWL_UCODE_MAX_CS];
};
#endif /* __iwl_fw_h__ */