mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 20:36:39 +07:00
6aa20a2235
Signed-off-by: Jeff Garzik <jeff@garzik.org>
565 lines
16 KiB
C
565 lines
16 KiB
C
/* smc-mca.c: A SMC Ultra ethernet driver for linux. */
|
|
/*
|
|
Most of this driver, except for ultramca_probe is nearly
|
|
verbatim from smc-ultra.c by Donald Becker. The rest is
|
|
written and copyright 1996 by David Weis, weisd3458@uni.edu
|
|
|
|
This is a driver for the SMC Ultra and SMC EtherEZ ethercards.
|
|
|
|
This driver uses the cards in the 8390-compatible, shared memory mode.
|
|
Most of the run-time complexity is handled by the generic code in
|
|
8390.c.
|
|
|
|
This driver enables the shared memory only when doing the actual data
|
|
transfers to avoid a bug in early version of the card that corrupted
|
|
data transferred by a AHA1542.
|
|
|
|
This driver does not support the programmed-I/O data transfer mode of
|
|
the EtherEZ. That support (if available) is smc-ez.c. Nor does it
|
|
use the non-8390-compatible "Altego" mode. (No support currently planned.)
|
|
|
|
Changelog:
|
|
|
|
Paul Gortmaker : multiple card support for module users.
|
|
David Weis : Micro Channel-ized it.
|
|
Tom Sightler : Added support for IBM PS/2 Ethernet Adapter/A
|
|
Christopher Turcksin : Changed MCA-probe so that multiple adapters are
|
|
found correctly (Jul 16, 1997)
|
|
Chris Beauregard : Tried to merge the two changes above (Dec 15, 1997)
|
|
Tom Sightler : Fixed minor detection bug caused by above merge
|
|
Tom Sightler : Added support for three more Western Digital
|
|
MCA-adapters
|
|
Tom Sightler : Added support for 2.2.x mca_find_unused_adapter
|
|
Hartmut Schmidt : - Modified parameter detection to handle each
|
|
card differently depending on a switch-list
|
|
- 'card_ver' removed from the adapter list
|
|
- Some minor bug fixes
|
|
*/
|
|
|
|
#include <linux/mca.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "8390.h"
|
|
|
|
#define DRV_NAME "smc-mca"
|
|
|
|
static int ultramca_open(struct net_device *dev);
|
|
static void ultramca_reset_8390(struct net_device *dev);
|
|
static void ultramca_get_8390_hdr(struct net_device *dev,
|
|
struct e8390_pkt_hdr *hdr,
|
|
int ring_page);
|
|
static void ultramca_block_input(struct net_device *dev, int count,
|
|
struct sk_buff *skb,
|
|
int ring_offset);
|
|
static void ultramca_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf,
|
|
const int start_page);
|
|
static int ultramca_close_card(struct net_device *dev);
|
|
|
|
#define START_PG 0x00 /* First page of TX buffer */
|
|
|
|
#define ULTRA_CMDREG 0 /* Offset to ASIC command register. */
|
|
#define ULTRA_RESET 0x80 /* Board reset, in ULTRA_CMDREG. */
|
|
#define ULTRA_MEMENB 0x40 /* Enable the shared memory. */
|
|
#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */
|
|
#define ULTRA_IO_EXTENT 32
|
|
#define EN0_ERWCNT 0x08 /* Early receive warning count. */
|
|
|
|
#define _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A 0
|
|
#define _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A 1
|
|
#define _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A 2
|
|
#define _6fc1_WD_Starcard_PLUS_A_WD8003ST_A 3
|
|
#define _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A 4
|
|
#define _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A 5
|
|
#define _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A 6
|
|
#define _efe5_IBM_PS2_Adapter_A_for_Ethernet 7
|
|
|
|
struct smc_mca_adapters_t {
|
|
unsigned int id;
|
|
char *name;
|
|
};
|
|
|
|
#define MAX_ULTRAMCA_CARDS 4 /* Max number of Ultra cards per module */
|
|
|
|
static int ultra_io[MAX_ULTRAMCA_CARDS];
|
|
static int ultra_irq[MAX_ULTRAMCA_CARDS];
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param_array(ultra_io, int, NULL, 0);
|
|
module_param_array(ultra_irq, int, NULL, 0);
|
|
MODULE_PARM_DESC(ultra_io, "SMC Ultra/EtherEZ MCA I/O base address(es)");
|
|
MODULE_PARM_DESC(ultra_irq, "SMC Ultra/EtherEZ MCA IRQ number(s)");
|
|
|
|
static const struct {
|
|
unsigned int base_addr;
|
|
} addr_table[] = {
|
|
{ 0x0800 },
|
|
{ 0x1800 },
|
|
{ 0x2800 },
|
|
{ 0x3800 },
|
|
{ 0x4800 },
|
|
{ 0x5800 },
|
|
{ 0x6800 },
|
|
{ 0x7800 },
|
|
{ 0x8800 },
|
|
{ 0x9800 },
|
|
{ 0xa800 },
|
|
{ 0xb800 },
|
|
{ 0xc800 },
|
|
{ 0xd800 },
|
|
{ 0xe800 },
|
|
{ 0xf800 }
|
|
};
|
|
|
|
#define MEM_MASK 64
|
|
|
|
static const struct {
|
|
unsigned char mem_index;
|
|
unsigned long mem_start;
|
|
unsigned char num_pages;
|
|
} mem_table[] = {
|
|
{ 16, 0x0c0000, 40 },
|
|
{ 18, 0x0c4000, 40 },
|
|
{ 20, 0x0c8000, 40 },
|
|
{ 22, 0x0cc000, 40 },
|
|
{ 24, 0x0d0000, 40 },
|
|
{ 26, 0x0d4000, 40 },
|
|
{ 28, 0x0d8000, 40 },
|
|
{ 30, 0x0dc000, 40 },
|
|
{144, 0xfc0000, 40 },
|
|
{148, 0xfc8000, 40 },
|
|
{154, 0xfd0000, 40 },
|
|
{156, 0xfd8000, 40 },
|
|
{ 0, 0x0c0000, 20 },
|
|
{ 1, 0x0c2000, 20 },
|
|
{ 2, 0x0c4000, 20 },
|
|
{ 3, 0x0c6000, 20 }
|
|
};
|
|
|
|
#define IRQ_MASK 243
|
|
static const struct {
|
|
unsigned char new_irq;
|
|
unsigned char old_irq;
|
|
} irq_table[] = {
|
|
{ 3, 3 },
|
|
{ 4, 4 },
|
|
{ 10, 10 },
|
|
{ 14, 15 }
|
|
};
|
|
|
|
static short smc_mca_adapter_ids[] __initdata = {
|
|
0x61c8,
|
|
0x61c9,
|
|
0x6fc0,
|
|
0x6fc1,
|
|
0x6fc2,
|
|
0xefd4,
|
|
0xefd5,
|
|
0xefe5,
|
|
0x0000
|
|
};
|
|
|
|
static char *smc_mca_adapter_names[] __initdata = {
|
|
"SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)",
|
|
"SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)",
|
|
"WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)",
|
|
"WD Starcard PLUS/A (WD8003ST/A)",
|
|
"WD Ethercard PLUS 10T/A (WD8003W/A)",
|
|
"IBM PS/2 Adapter/A for Ethernet UTP/AUI (WD8013WP/A)",
|
|
"IBM PS/2 Adapter/A for Ethernet BNC/AUI (WD8013EP/A)",
|
|
"IBM PS/2 Adapter/A for Ethernet",
|
|
NULL
|
|
};
|
|
|
|
static int ultra_found = 0;
|
|
|
|
static int __init ultramca_probe(struct device *gen_dev)
|
|
{
|
|
unsigned short ioaddr;
|
|
struct net_device *dev;
|
|
unsigned char reg4, num_pages;
|
|
struct mca_device *mca_dev = to_mca_device(gen_dev);
|
|
char slot = mca_dev->slot;
|
|
unsigned char pos2 = 0xff, pos3 = 0xff, pos4 = 0xff, pos5 = 0xff;
|
|
int i, rc;
|
|
int adapter = mca_dev->index;
|
|
int tbase = 0;
|
|
int tirq = 0;
|
|
int base_addr = ultra_io[ultra_found];
|
|
int irq = ultra_irq[ultra_found];
|
|
|
|
if (base_addr || irq) {
|
|
printk(KERN_INFO "Probing for SMC MCA adapter");
|
|
if (base_addr) {
|
|
printk(KERN_INFO " at I/O address 0x%04x%c",
|
|
base_addr, irq ? ' ' : '\n');
|
|
}
|
|
if (irq) {
|
|
printk(KERN_INFO "using irq %d\n", irq);
|
|
}
|
|
}
|
|
|
|
tirq = 0;
|
|
tbase = 0;
|
|
|
|
/* If we're trying to match a specificied irq or io address,
|
|
* we'll reject the adapter found unless it's the one we're
|
|
* looking for */
|
|
|
|
pos2 = mca_device_read_stored_pos(mca_dev, 2); /* io_addr */
|
|
pos3 = mca_device_read_stored_pos(mca_dev, 3); /* shared mem */
|
|
pos4 = mca_device_read_stored_pos(mca_dev, 4); /* ROM bios addr range */
|
|
pos5 = mca_device_read_stored_pos(mca_dev, 5); /* irq, media and RIPL */
|
|
|
|
/* Test the following conditions:
|
|
* - If an irq parameter is supplied, compare it
|
|
* with the irq of the adapter we found
|
|
* - If a base_addr paramater is given, compare it
|
|
* with the base_addr of the adapter we found
|
|
* - Check that the irq and the base_addr of the
|
|
* adapter we found is not already in use by
|
|
* this driver
|
|
*/
|
|
|
|
switch (mca_dev->index) {
|
|
case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
|
|
case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
|
|
case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
|
|
case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
|
|
{
|
|
tbase = addr_table[(pos2 & 0xf0) >> 4].base_addr;
|
|
tirq = irq_table[(pos5 & 0xc) >> 2].new_irq;
|
|
break;
|
|
}
|
|
case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
|
|
case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
|
|
case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
|
|
case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
|
|
{
|
|
tbase = ((pos2 & 0x0fe) * 0x10);
|
|
tirq = irq_table[(pos5 & 3)].old_irq;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if(!tirq || !tbase
|
|
|| (irq && irq != tirq)
|
|
|| (base_addr && tbase != base_addr))
|
|
/* FIXME: we're trying to force the ordering of the
|
|
* devices here, there should be a way of getting this
|
|
* to happen */
|
|
return -ENXIO;
|
|
|
|
/* Adapter found. */
|
|
dev = alloc_ei_netdev();
|
|
if(!dev)
|
|
return -ENODEV;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, gen_dev);
|
|
mca_device_set_name(mca_dev, smc_mca_adapter_names[adapter]);
|
|
mca_device_set_claim(mca_dev, 1);
|
|
|
|
printk(KERN_INFO "smc_mca: %s found in slot %d\n",
|
|
smc_mca_adapter_names[adapter], slot + 1);
|
|
|
|
ultra_found++;
|
|
|
|
dev->base_addr = ioaddr = mca_device_transform_ioport(mca_dev, tbase);
|
|
dev->irq = mca_device_transform_irq(mca_dev, tirq);
|
|
dev->mem_start = 0;
|
|
num_pages = 40;
|
|
|
|
switch (adapter) { /* card-# in const array above [hs] */
|
|
case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
|
|
case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
|
|
{
|
|
for (i = 0; i < 16; i++) { /* taking 16 counts
|
|
* up to 15 [hs] */
|
|
if (mem_table[i].mem_index == (pos3 & ~MEM_MASK)) {
|
|
dev->mem_start = (unsigned long)
|
|
mca_device_transform_memory(mca_dev, (void *)mem_table[i].mem_start);
|
|
num_pages = mem_table[i].num_pages;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
|
|
case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
|
|
case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
|
|
case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
|
|
{
|
|
dev->mem_start = (unsigned long)
|
|
mca_device_transform_memory(mca_dev, (void *)((pos3 & 0xfc) * 0x1000));
|
|
num_pages = 0x40;
|
|
break;
|
|
}
|
|
case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
|
|
case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
|
|
{
|
|
/* courtesy of gamera@quartz.ocn.ne.jp, pos3 indicates
|
|
* the index of the 0x2000 step.
|
|
* beware different number of pages [hs]
|
|
*/
|
|
dev->mem_start = (unsigned long)
|
|
mca_device_transform_memory(mca_dev, (void *)(0xc0000 + (0x2000 * (pos3 & 0xf))));
|
|
num_pages = 0x20 + (2 * (pos3 & 0x10));
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* sanity check, shouldn't happen */
|
|
if (dev->mem_start == 0) {
|
|
rc = -ENODEV;
|
|
goto err_unclaim;
|
|
}
|
|
|
|
if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) {
|
|
rc = -ENODEV;
|
|
goto err_unclaim;
|
|
}
|
|
|
|
reg4 = inb(ioaddr + 4) & 0x7f;
|
|
outb(reg4, ioaddr + 4);
|
|
|
|
printk(KERN_INFO "smc_mca[%d]: Parameters: %#3x,", slot + 1, ioaddr);
|
|
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
|
|
|
|
/* Switch from the station address to the alternate register set
|
|
* and read the useful registers there.
|
|
*/
|
|
|
|
outb(0x80 | reg4, ioaddr + 4);
|
|
|
|
/* Enable FINE16 mode to avoid BIOS ROM width mismatches @ reboot.
|
|
*/
|
|
|
|
outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
|
|
|
|
/* Switch back to the station address register set so that
|
|
* the MS-DOS driver can find the card after a warm boot.
|
|
*/
|
|
|
|
outb(reg4, ioaddr + 4);
|
|
|
|
gen_dev->driver_data = dev;
|
|
|
|
/* The 8390 isn't at the base address, so fake the offset
|
|
*/
|
|
|
|
dev->base_addr = ioaddr + ULTRA_NIC_OFFSET;
|
|
|
|
ei_status.name = "SMC Ultra MCA";
|
|
ei_status.word16 = 1;
|
|
ei_status.tx_start_page = START_PG;
|
|
ei_status.rx_start_page = START_PG + TX_PAGES;
|
|
ei_status.stop_page = num_pages;
|
|
|
|
ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG) * 256);
|
|
if (!ei_status.mem) {
|
|
rc = -ENOMEM;
|
|
goto err_release_region;
|
|
}
|
|
|
|
dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG) * 256;
|
|
|
|
printk(", IRQ %d memory %#lx-%#lx.\n",
|
|
dev->irq, dev->mem_start, dev->mem_end - 1);
|
|
|
|
ei_status.reset_8390 = &ultramca_reset_8390;
|
|
ei_status.block_input = &ultramca_block_input;
|
|
ei_status.block_output = &ultramca_block_output;
|
|
ei_status.get_8390_hdr = &ultramca_get_8390_hdr;
|
|
|
|
ei_status.priv = slot;
|
|
|
|
dev->open = &ultramca_open;
|
|
dev->stop = &ultramca_close_card;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = ei_poll;
|
|
#endif
|
|
|
|
NS8390_init(dev, 0);
|
|
|
|
rc = register_netdev(dev);
|
|
if (rc)
|
|
goto err_unmap;
|
|
|
|
return 0;
|
|
|
|
err_unmap:
|
|
iounmap(ei_status.mem);
|
|
err_release_region:
|
|
release_region(ioaddr, ULTRA_IO_EXTENT);
|
|
err_unclaim:
|
|
mca_device_set_claim(mca_dev, 0);
|
|
free_netdev(dev);
|
|
return rc;
|
|
}
|
|
|
|
static int ultramca_open(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
|
int retval;
|
|
|
|
if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
|
|
return retval;
|
|
|
|
outb(ULTRA_MEMENB, ioaddr); /* Enable memory */
|
|
outb(0x80, ioaddr + 5); /* ??? */
|
|
outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */
|
|
outb(0x04, ioaddr + 5); /* ??? */
|
|
|
|
/* Set the early receive warning level in window 0 high enough not
|
|
* to receive ERW interrupts.
|
|
*/
|
|
|
|
/* outb_p(E8390_NODMA + E8390_PAGE0, dev->base_addr);
|
|
* outb(0xff, dev->base_addr + EN0_ERWCNT);
|
|
*/
|
|
|
|
ei_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void ultramca_reset_8390(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
|
|
|
outb(ULTRA_RESET, ioaddr);
|
|
if (ei_debug > 1)
|
|
printk("resetting Ultra, t=%ld...", jiffies);
|
|
ei_status.txing = 0;
|
|
|
|
outb(0x80, ioaddr + 5); /* ??? */
|
|
outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */
|
|
|
|
if (ei_debug > 1)
|
|
printk("reset done\n");
|
|
return;
|
|
}
|
|
|
|
/* Grab the 8390 specific header. Similar to the block_input routine, but
|
|
* we don't need to be concerned with ring wrap as the header will be at
|
|
* the start of a page, so we optimize accordingly.
|
|
*/
|
|
|
|
static void ultramca_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
|
{
|
|
void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG) << 8);
|
|
|
|
#ifdef notdef
|
|
/* Officially this is what we are doing, but the readl() is faster */
|
|
memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
|
|
#else
|
|
((unsigned int*)hdr)[0] = readl(hdr_start);
|
|
#endif
|
|
}
|
|
|
|
/* Block input and output are easy on shared memory ethercards, the only
|
|
* complication is when the ring buffer wraps.
|
|
*/
|
|
|
|
static void ultramca_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
|
|
{
|
|
void __iomem *xfer_start = ei_status.mem + ring_offset - START_PG * 256;
|
|
|
|
if (ring_offset + count > ei_status.stop_page * 256) {
|
|
/* We must wrap the input move. */
|
|
int semi_count = ei_status.stop_page * 256 - ring_offset;
|
|
memcpy_fromio(skb->data, xfer_start, semi_count);
|
|
count -= semi_count;
|
|
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
|
|
} else {
|
|
/* Packet is in one chunk -- we can copy + cksum. */
|
|
eth_io_copy_and_sum(skb, xfer_start, count, 0);
|
|
}
|
|
|
|
}
|
|
|
|
static void ultramca_block_output(struct net_device *dev, int count, const unsigned char *buf,
|
|
int start_page)
|
|
{
|
|
void __iomem *shmem = ei_status.mem + ((start_page - START_PG) << 8);
|
|
|
|
memcpy_toio(shmem, buf, count);
|
|
}
|
|
|
|
static int ultramca_close_card(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (ei_debug > 1)
|
|
printk("%s: Shutting down ethercard.\n", dev->name);
|
|
|
|
outb(0x00, ioaddr + 6); /* Disable interrupts. */
|
|
free_irq(dev->irq, dev);
|
|
|
|
NS8390_init(dev, 0);
|
|
/* We should someday disable shared memory and change to 8-bit mode
|
|
* "just in case"...
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ultramca_remove(struct device *gen_dev)
|
|
{
|
|
struct mca_device *mca_dev = to_mca_device(gen_dev);
|
|
struct net_device *dev = (struct net_device *)gen_dev->driver_data;
|
|
|
|
if (dev) {
|
|
/* NB: ultra_close_card() does free_irq */
|
|
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET;
|
|
|
|
unregister_netdev(dev);
|
|
mca_device_set_claim(mca_dev, 0);
|
|
release_region(ioaddr, ULTRA_IO_EXTENT);
|
|
iounmap(ei_status.mem);
|
|
free_netdev(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct mca_driver ultra_driver = {
|
|
.id_table = smc_mca_adapter_ids,
|
|
.driver = {
|
|
.name = "smc-mca",
|
|
.bus = &mca_bus_type,
|
|
.probe = ultramca_probe,
|
|
.remove = ultramca_remove,
|
|
}
|
|
};
|
|
|
|
static int __init ultramca_init_module(void)
|
|
{
|
|
if(!MCA_bus)
|
|
return -ENXIO;
|
|
|
|
mca_register_driver(&ultra_driver);
|
|
|
|
return ultra_found ? 0 : -ENXIO;
|
|
}
|
|
|
|
static void __exit ultramca_cleanup_module(void)
|
|
{
|
|
mca_unregister_driver(&ultra_driver);
|
|
}
|
|
module_init(ultramca_init_module);
|
|
module_exit(ultramca_cleanup_module);
|
|
|