linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_crt.c
Maarten Lankhorst 6c5ed5ae35 drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.

Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.

This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.

Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
  WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com
2017-04-06 21:29:23 +02:00

950 lines
26 KiB
C

/*
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/dmi.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
/* Here's the desired hotplug mode */
#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
ADPA_CRT_HOTPLUG_WARMUP_10MS | \
ADPA_CRT_HOTPLUG_SAMPLE_4S | \
ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
ADPA_CRT_HOTPLUG_VOLREF_325MV | \
ADPA_CRT_HOTPLUG_ENABLE)
struct intel_crt {
struct intel_encoder base;
/* DPMS state is stored in the connector, which we need in the
* encoder's enable/disable callbacks */
struct intel_connector *connector;
bool force_hotplug_required;
i915_reg_t adpa_reg;
};
static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
{
return container_of(encoder, struct intel_crt, base);
}
static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
{
return intel_encoder_to_crt(intel_attached_encoder(connector));
}
static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crt *crt = intel_encoder_to_crt(encoder);
u32 tmp;
bool ret;
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
return false;
ret = false;
tmp = I915_READ(crt->adpa_reg);
if (!(tmp & ADPA_DAC_ENABLE))
goto out;
if (HAS_PCH_CPT(dev_priv))
*pipe = PORT_TO_PIPE_CPT(tmp);
else
*pipe = PORT_TO_PIPE(tmp);
ret = true;
out:
intel_display_power_put(dev_priv, encoder->power_domain);
return ret;
}
static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crt *crt = intel_encoder_to_crt(encoder);
u32 tmp, flags = 0;
tmp = I915_READ(crt->adpa_reg);
if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
return flags;
}
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
}
static void hsw_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
intel_ddi_get_config(encoder, pipe_config);
pipe_config->base.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
DRM_MODE_FLAG_NHSYNC |
DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_NVSYNC);
pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
pipe_config->base.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv);
}
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state,
int mode)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crt *crt = intel_encoder_to_crt(encoder);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
u32 adpa;
if (INTEL_GEN(dev_priv) >= 5)
adpa = ADPA_HOTPLUG_BITS;
else
adpa = 0;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
adpa |= ADPA_VSYNC_ACTIVE_HIGH;
/* For CPT allow 3 pipe config, for others just use A or B */
if (HAS_PCH_LPT(dev_priv))
; /* Those bits don't exist here */
else if (HAS_PCH_CPT(dev_priv))
adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
else if (crtc->pipe == 0)
adpa |= ADPA_PIPE_A_SELECT;
else
adpa |= ADPA_PIPE_B_SELECT;
if (!HAS_PCH_SPLIT(dev_priv))
I915_WRITE(BCLRPAT(crtc->pipe), 0);
switch (mode) {
case DRM_MODE_DPMS_ON:
adpa |= ADPA_DAC_ENABLE;
break;
case DRM_MODE_DPMS_STANDBY:
adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_SUSPEND:
adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_OFF:
adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
}
I915_WRITE(crt->adpa_reg, adpa);
}
static void intel_disable_crt(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF);
}
static void pch_disable_crt(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
}
static void pch_post_disable_crt(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
intel_disable_crt(encoder, old_crtc_state, old_conn_state);
}
static void hsw_post_disable_crt(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
pch_post_disable_crt(encoder, old_crtc_state, old_conn_state);
lpt_disable_pch_transcoder(dev_priv);
lpt_disable_iclkip(dev_priv);
intel_ddi_fdi_post_disable(encoder, old_crtc_state, old_conn_state);
}
static void intel_enable_crt(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
intel_crt_set_dpms(encoder, pipe_config, DRM_MODE_DPMS_ON);
}
static enum drm_mode_status
intel_crt_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
int max_dotclk = dev_priv->max_dotclk_freq;
int max_clock;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
if (mode->clock < 25000)
return MODE_CLOCK_LOW;
if (HAS_PCH_LPT(dev_priv))
max_clock = 180000;
else if (IS_VALLEYVIEW(dev_priv))
/*
* 270 MHz due to current DPLL limits,
* DAC limit supposedly 355 MHz.
*/
max_clock = 270000;
else if (IS_GEN3(dev_priv) || IS_GEN4(dev_priv))
max_clock = 400000;
else
max_clock = 350000;
if (mode->clock > max_clock)
return MODE_CLOCK_HIGH;
if (mode->clock > max_dotclk)
return MODE_CLOCK_HIGH;
/* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
if (HAS_PCH_LPT(dev_priv) &&
(ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))
return MODE_CLOCK_HIGH;
return MODE_OK;
}
static bool intel_crt_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (HAS_PCH_SPLIT(dev_priv))
pipe_config->has_pch_encoder = true;
/* LPT FDI RX only supports 8bpc. */
if (HAS_PCH_LPT(dev_priv)) {
if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
DRM_DEBUG_KMS("LPT only supports 24bpp\n");
return false;
}
pipe_config->pipe_bpp = 24;
}
/* FDI must always be 2.7 GHz */
if (HAS_DDI(dev_priv))
pipe_config->port_clock = 135000 * 2;
return true;
}
static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = to_i915(dev);
u32 adpa;
bool ret;
/* The first time through, trigger an explicit detection cycle */
if (crt->force_hotplug_required) {
bool turn_off_dac = HAS_PCH_SPLIT(dev_priv);
u32 save_adpa;
crt->force_hotplug_required = 0;
save_adpa = adpa = I915_READ(crt->adpa_reg);
DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
if (turn_off_dac)
adpa &= ~ADPA_DAC_ENABLE;
I915_WRITE(crt->adpa_reg, adpa);
if (intel_wait_for_register(dev_priv,
crt->adpa_reg,
ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0,
1000))
DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
if (turn_off_dac) {
I915_WRITE(crt->adpa_reg, save_adpa);
POSTING_READ(crt->adpa_reg);
}
}
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(crt->adpa_reg);
if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
ret = true;
else
ret = false;
DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
return ret;
}
static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = to_i915(dev);
bool reenable_hpd;
u32 adpa;
bool ret;
u32 save_adpa;
/*
* Doing a force trigger causes a hpd interrupt to get sent, which can
* get us stuck in a loop if we're polling:
* - We enable power wells and reset the ADPA
* - output_poll_exec does force probe on VGA, triggering a hpd
* - HPD handler waits for poll to unlock dev->mode_config.mutex
* - output_poll_exec shuts off the ADPA, unlocks
* dev->mode_config.mutex
* - HPD handler runs, resets ADPA and brings us back to the start
*
* Just disable HPD interrupts here to prevent this
*/
reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
save_adpa = adpa = I915_READ(crt->adpa_reg);
DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
I915_WRITE(crt->adpa_reg, adpa);
if (intel_wait_for_register(dev_priv,
crt->adpa_reg,
ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0,
1000)) {
DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
I915_WRITE(crt->adpa_reg, save_adpa);
}
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(crt->adpa_reg);
if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
ret = true;
else
ret = false;
DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
if (reenable_hpd)
intel_hpd_enable(dev_priv, crt->base.hpd_pin);
return ret;
}
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
*
* Not for i915G/i915GM
*
* \return true if CRT is connected.
* \return false if CRT is disconnected.
*/
static bool intel_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 stat;
bool ret = false;
int i, tries = 0;
if (HAS_PCH_SPLIT(dev_priv))
return intel_ironlake_crt_detect_hotplug(connector);
if (IS_VALLEYVIEW(dev_priv))
return valleyview_crt_detect_hotplug(connector);
/*
* On 4 series desktop, CRT detect sequence need to be done twice
* to get a reliable result.
*/
if (IS_G4X(dev_priv) && !IS_GM45(dev_priv))
tries = 2;
else
tries = 1;
for (i = 0; i < tries ; i++) {
/* turn on the FORCE_DETECT */
i915_hotplug_interrupt_update(dev_priv,
CRT_HOTPLUG_FORCE_DETECT,
CRT_HOTPLUG_FORCE_DETECT);
/* wait for FORCE_DETECT to go off */
if (intel_wait_for_register(dev_priv, PORT_HOTPLUG_EN,
CRT_HOTPLUG_FORCE_DETECT, 0,
1000))
DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
}
stat = I915_READ(PORT_HOTPLUG_STAT);
if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
ret = true;
/* clear the interrupt we just generated, if any */
I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);
return ret;
}
static struct edid *intel_crt_get_edid(struct drm_connector *connector,
struct i2c_adapter *i2c)
{
struct edid *edid;
edid = drm_get_edid(connector, i2c);
if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
intel_gmbus_force_bit(i2c, true);
edid = drm_get_edid(connector, i2c);
intel_gmbus_force_bit(i2c, false);
}
return edid;
}
/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
static int intel_crt_ddc_get_modes(struct drm_connector *connector,
struct i2c_adapter *adapter)
{
struct edid *edid;
int ret;
edid = intel_crt_get_edid(connector, adapter);
if (!edid)
return 0;
ret = intel_connector_update_modes(connector, edid);
kfree(edid);
return ret;
}
static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev);
struct edid *edid;
struct i2c_adapter *i2c;
bool ret = false;
BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
edid = intel_crt_get_edid(connector, i2c);
if (edid) {
bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
* have to check the EDID input spec of the attached device.
*/
if (!is_digital) {
DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
ret = true;
} else {
DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
}
} else {
DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
}
kfree(edid);
return ret;
}
static enum drm_connector_status
intel_crt_load_detect(struct intel_crt *crt, uint32_t pipe)
{
struct drm_device *dev = crt->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t save_bclrpat;
uint32_t save_vtotal;
uint32_t vtotal, vactive;
uint32_t vsample;
uint32_t vblank, vblank_start, vblank_end;
uint32_t dsl;
i915_reg_t bclrpat_reg, vtotal_reg,
vblank_reg, vsync_reg, pipeconf_reg, pipe_dsl_reg;
uint8_t st00;
enum drm_connector_status status;
DRM_DEBUG_KMS("starting load-detect on CRT\n");
bclrpat_reg = BCLRPAT(pipe);
vtotal_reg = VTOTAL(pipe);
vblank_reg = VBLANK(pipe);
vsync_reg = VSYNC(pipe);
pipeconf_reg = PIPECONF(pipe);
pipe_dsl_reg = PIPEDSL(pipe);
save_bclrpat = I915_READ(bclrpat_reg);
save_vtotal = I915_READ(vtotal_reg);
vblank = I915_READ(vblank_reg);
vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
vactive = (save_vtotal & 0x7ff) + 1;
vblank_start = (vblank & 0xfff) + 1;
vblank_end = ((vblank >> 16) & 0xfff) + 1;
/* Set the border color to purple. */
I915_WRITE(bclrpat_reg, 0x500050);
if (!IS_GEN2(dev_priv)) {
uint32_t pipeconf = I915_READ(pipeconf_reg);
I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
POSTING_READ(pipeconf_reg);
/* Wait for next Vblank to substitue
* border color for Color info */
intel_wait_for_vblank(dev_priv, pipe);
st00 = I915_READ8(_VGA_MSR_WRITE);
status = ((st00 & (1 << 4)) != 0) ?
connector_status_connected :
connector_status_disconnected;
I915_WRITE(pipeconf_reg, pipeconf);
} else {
bool restore_vblank = false;
int count, detect;
/*
* If there isn't any border, add some.
* Yes, this will flicker
*/
if (vblank_start <= vactive && vblank_end >= vtotal) {
uint32_t vsync = I915_READ(vsync_reg);
uint32_t vsync_start = (vsync & 0xffff) + 1;
vblank_start = vsync_start;
I915_WRITE(vblank_reg,
(vblank_start - 1) |
((vblank_end - 1) << 16));
restore_vblank = true;
}
/* sample in the vertical border, selecting the larger one */
if (vblank_start - vactive >= vtotal - vblank_end)
vsample = (vblank_start + vactive) >> 1;
else
vsample = (vtotal + vblank_end) >> 1;
/*
* Wait for the border to be displayed
*/
while (I915_READ(pipe_dsl_reg) >= vactive)
;
while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
;
/*
* Watch ST00 for an entire scanline
*/
detect = 0;
count = 0;
do {
count++;
/* Read the ST00 VGA status register */
st00 = I915_READ8(_VGA_MSR_WRITE);
if (st00 & (1 << 4))
detect++;
} while ((I915_READ(pipe_dsl_reg) == dsl));
/* restore vblank if necessary */
if (restore_vblank)
I915_WRITE(vblank_reg, vblank);
/*
* If more than 3/4 of the scanline detected a monitor,
* then it is assumed to be present. This works even on i830,
* where there isn't any way to force the border color across
* the screen
*/
status = detect * 4 > count * 3 ?
connector_status_connected :
connector_status_disconnected;
}
/* Restore previous settings */
I915_WRITE(bclrpat_reg, save_bclrpat);
return status;
}
static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident);
return 1;
}
static const struct dmi_system_id intel_spurious_crt_detect[] = {
{
.callback = intel_spurious_crt_detect_dmi_callback,
.ident = "ACER ZGB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
},
},
{
.callback = intel_spurious_crt_detect_dmi_callback,
.ident = "Intel DZ77BH-55K",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"),
},
},
{ }
};
static int
intel_crt_detect(struct drm_connector *connector,
struct drm_modeset_acquire_ctx *ctx,
bool force)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_crt *crt = intel_attached_crt(connector);
struct intel_encoder *intel_encoder = &crt->base;
int status, ret;
struct intel_load_detect_pipe tmp;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
connector->base.id, connector->name,
force);
/* Skip machines without VGA that falsely report hotplug events */
if (dmi_check_system(intel_spurious_crt_detect))
return connector_status_disconnected;
intel_display_power_get(dev_priv, intel_encoder->power_domain);
if (I915_HAS_HOTPLUG(dev_priv)) {
/* We can not rely on the HPD pin always being correctly wired
* up, for example many KVM do not pass it through, and so
* only trust an assertion that the monitor is connected.
*/
if (intel_crt_detect_hotplug(connector)) {
DRM_DEBUG_KMS("CRT detected via hotplug\n");
status = connector_status_connected;
goto out;
} else
DRM_DEBUG_KMS("CRT not detected via hotplug\n");
}
if (intel_crt_detect_ddc(connector)) {
status = connector_status_connected;
goto out;
}
/* Load detection is broken on HPD capable machines. Whoever wants a
* broken monitor (without edid) to work behind a broken kvm (that fails
* to have the right resistors for HP detection) needs to fix this up.
* For now just bail out. */
if (I915_HAS_HOTPLUG(dev_priv) && !i915.load_detect_test) {
status = connector_status_disconnected;
goto out;
}
if (!force) {
status = connector->status;
goto out;
}
/* for pre-945g platforms use load detect */
ret = intel_get_load_detect_pipe(connector, NULL, &tmp, ctx);
if (ret > 0) {
if (intel_crt_detect_ddc(connector))
status = connector_status_connected;
else if (INTEL_GEN(dev_priv) < 4)
status = intel_crt_load_detect(crt,
to_intel_crtc(connector->state->crtc)->pipe);
else if (i915.load_detect_test)
status = connector_status_disconnected;
else
status = connector_status_unknown;
intel_release_load_detect_pipe(connector, &tmp, ctx);
} else if (ret == 0)
status = connector_status_unknown;
else if (ret < 0)
status = ret;
out:
intel_display_power_put(dev_priv, intel_encoder->power_domain);
return status;
}
static void intel_crt_destroy(struct drm_connector *connector)
{
drm_connector_cleanup(connector);
kfree(connector);
}
static int intel_crt_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crt *crt = intel_attached_crt(connector);
struct intel_encoder *intel_encoder = &crt->base;
int ret;
struct i2c_adapter *i2c;
intel_display_power_get(dev_priv, intel_encoder->power_domain);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
ret = intel_crt_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev_priv))
goto out;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);
ret = intel_crt_ddc_get_modes(connector, i2c);
out:
intel_display_power_put(dev_priv, intel_encoder->power_domain);
return ret;
}
static int intel_crt_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
return 0;
}
void intel_crt_reset(struct drm_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
if (INTEL_GEN(dev_priv) >= 5) {
u32 adpa;
adpa = I915_READ(crt->adpa_reg);
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
adpa |= ADPA_HOTPLUG_BITS;
I915_WRITE(crt->adpa_reg, adpa);
POSTING_READ(crt->adpa_reg);
DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa);
crt->force_hotplug_required = 1;
}
}
/*
* Routines for controlling stuff on the analog port
*/
static const struct drm_connector_funcs intel_crt_connector_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
.destroy = intel_crt_destroy,
.set_property = intel_crt_set_property,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_get_property = intel_connector_atomic_get_property,
};
static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
.detect_ctx = intel_crt_detect,
.mode_valid = intel_crt_mode_valid,
.get_modes = intel_crt_get_modes,
};
static const struct drm_encoder_funcs intel_crt_enc_funcs = {
.reset = intel_crt_reset,
.destroy = intel_encoder_destroy,
};
void intel_crt_init(struct drm_i915_private *dev_priv)
{
struct drm_connector *connector;
struct intel_crt *crt;
struct intel_connector *intel_connector;
i915_reg_t adpa_reg;
u32 adpa;
if (HAS_PCH_SPLIT(dev_priv))
adpa_reg = PCH_ADPA;
else if (IS_VALLEYVIEW(dev_priv))
adpa_reg = VLV_ADPA;
else
adpa_reg = ADPA;
adpa = I915_READ(adpa_reg);
if ((adpa & ADPA_DAC_ENABLE) == 0) {
/*
* On some machines (some IVB at least) CRT can be
* fused off, but there's no known fuse bit to
* indicate that. On these machine the ADPA register
* works normally, except the DAC enable bit won't
* take. So the only way to tell is attempt to enable
* it and see what happens.
*/
I915_WRITE(adpa_reg, adpa | ADPA_DAC_ENABLE |
ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
if ((I915_READ(adpa_reg) & ADPA_DAC_ENABLE) == 0)
return;
I915_WRITE(adpa_reg, adpa);
}
crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
if (!crt)
return;
intel_connector = intel_connector_alloc();
if (!intel_connector) {
kfree(crt);
return;
}
connector = &intel_connector->base;
crt->connector = intel_connector;
drm_connector_init(&dev_priv->drm, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
drm_encoder_init(&dev_priv->drm, &crt->base.base, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC, "CRT");
intel_connector_attach_encoder(intel_connector, &crt->base);
crt->base.type = INTEL_OUTPUT_ANALOG;
crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
if (IS_I830(dev_priv))
crt->base.crtc_mask = (1 << 0);
else
crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
if (IS_GEN2(dev_priv))
connector->interlace_allowed = 0;
else
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
crt->adpa_reg = adpa_reg;
crt->base.power_domain = POWER_DOMAIN_PORT_CRT;
crt->base.compute_config = intel_crt_compute_config;
if (HAS_PCH_SPLIT(dev_priv)) {
crt->base.disable = pch_disable_crt;
crt->base.post_disable = pch_post_disable_crt;
} else {
crt->base.disable = intel_disable_crt;
}
crt->base.enable = intel_enable_crt;
if (I915_HAS_HOTPLUG(dev_priv) &&
!dmi_check_system(intel_spurious_crt_detect))
crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev_priv)) {
crt->base.port = PORT_E;
crt->base.get_config = hsw_crt_get_config;
crt->base.get_hw_state = intel_ddi_get_hw_state;
crt->base.post_disable = hsw_post_disable_crt;
} else {
crt->base.port = PORT_NONE;
crt->base.get_config = intel_crt_get_config;
crt->base.get_hw_state = intel_crt_get_hw_state;
}
intel_connector->get_hw_state = intel_connector_get_hw_state;
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
if (!I915_HAS_HOTPLUG(dev_priv))
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
/*
* Configure the automatic hotplug detection stuff
*/
crt->force_hotplug_required = 0;
/*
* TODO: find a proper way to discover whether we need to set the the
* polarity and link reversal bits or not, instead of relying on the
* BIOS.
*/
if (HAS_PCH_LPT(dev_priv)) {
u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
FDI_RX_LINK_REVERSAL_OVERRIDE;
dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
}
intel_crt_reset(&crt->base.base);
}