linux_dsm_epyc7002/drivers/char/tpm/tpm_nsc.c
Stefan Berger 1f86605729 tpm: Fix cancellation of TPM commands (polling mode)
On one of my machines the cancellation of TPM commands does not work.
The reason is that by writing into sysfs 'cancel' the tpm_tis_ready
call causes the status flag TPM_STS_VALID to be set in the statusregister.
However, the TIS driver seems to wait for TPM_STS_COMMAND_READY.
Once a 2nd time sysfs 'cancel' is written to, the TPM_STS_COMMAND_READY flag
also gets set, resulting in TPM_STS_VALID|TPM_STS_COMMAND_READY to be
read from the status register.

This patch now converts req_canceled into a function to enable more complex
comparisons against possible cancellation status codes.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05 09:38:24 -06:00

407 lines
9.9 KiB
C

/*
* Copyright (C) 2004 IBM Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Dave Safford <safford@watson.ibm.com>
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*
*/
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "tpm.h"
/* National definitions */
enum tpm_nsc_addr{
TPM_NSC_IRQ = 0x07,
TPM_NSC_BASE0_HI = 0x60,
TPM_NSC_BASE0_LO = 0x61,
TPM_NSC_BASE1_HI = 0x62,
TPM_NSC_BASE1_LO = 0x63
};
enum tpm_nsc_index {
NSC_LDN_INDEX = 0x07,
NSC_SID_INDEX = 0x20,
NSC_LDC_INDEX = 0x30,
NSC_DIO_INDEX = 0x60,
NSC_CIO_INDEX = 0x62,
NSC_IRQ_INDEX = 0x70,
NSC_ITS_INDEX = 0x71
};
enum tpm_nsc_status_loc {
NSC_STATUS = 0x01,
NSC_COMMAND = 0x01,
NSC_DATA = 0x00
};
/* status bits */
enum tpm_nsc_status {
NSC_STATUS_OBF = 0x01, /* output buffer full */
NSC_STATUS_IBF = 0x02, /* input buffer full */
NSC_STATUS_F0 = 0x04, /* F0 */
NSC_STATUS_A2 = 0x08, /* A2 */
NSC_STATUS_RDY = 0x10, /* ready to receive command */
NSC_STATUS_IBR = 0x20 /* ready to receive data */
};
/* command bits */
enum tpm_nsc_cmd_mode {
NSC_COMMAND_NORMAL = 0x01, /* normal mode */
NSC_COMMAND_EOC = 0x03,
NSC_COMMAND_CANCEL = 0x22
};
/*
* Wait for a certain status to appear
*/
static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
{
unsigned long stop;
/* status immediately available check */
*data = inb(chip->vendor.base + NSC_STATUS);
if ((*data & mask) == val)
return 0;
/* wait for status */
stop = jiffies + 10 * HZ;
do {
msleep(TPM_TIMEOUT);
*data = inb(chip->vendor.base + 1);
if ((*data & mask) == val)
return 0;
}
while (time_before(jiffies, stop));
return -EBUSY;
}
static int nsc_wait_for_ready(struct tpm_chip *chip)
{
int status;
unsigned long stop;
/* status immediately available check */
status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor.base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
/* wait for status */
stop = jiffies + 100;
do {
msleep(TPM_TIMEOUT);
status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor.base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
}
while (time_before(jiffies, stop));
dev_info(chip->dev, "wait for ready failed\n");
return -EBUSY;
}
static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 *buffer = buf;
u8 data, *p;
u32 size;
__be32 *native_size;
if (count < 6)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
dev_err(chip->dev, "F0 timeout\n");
return -EIO;
}
if ((data =
inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
dev_err(chip->dev, "not in normal mode (0x%x)\n",
data);
return -EIO;
}
/* read the whole packet */
for (p = buffer; p < &buffer[count]; p++) {
if (wait_for_stat
(chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
dev_err(chip->dev,
"OBF timeout (while reading data)\n");
return -EIO;
}
if (data & NSC_STATUS_F0)
break;
*p = inb(chip->vendor.base + NSC_DATA);
}
if ((data & NSC_STATUS_F0) == 0 &&
(wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
dev_err(chip->dev, "F0 not set\n");
return -EIO;
}
if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
dev_err(chip->dev,
"expected end of command(0x%x)\n", data);
return -EIO;
}
native_size = (__force __be32 *) (buf + 2);
size = be32_to_cpu(*native_size);
if (count < size)
return -EIO;
return size;
}
static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 data;
int i;
/*
* If we hit the chip with back to back commands it locks up
* and never set IBF. Hitting it with this "hammer" seems to
* fix it. Not sure why this is needed, we followed the flow
* chart in the manual to the letter.
*/
outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
if (nsc_wait_for_ready(chip) != 0)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
dev_err(chip->dev, "IBR timeout\n");
return -EIO;
}
for (i = 0; i < count; i++) {
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev,
"IBF timeout (while writing data)\n");
return -EIO;
}
outb(buf[i], chip->vendor.base + NSC_DATA);
}
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
return count;
}
static void tpm_nsc_cancel(struct tpm_chip *chip)
{
outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
}
static u8 tpm_nsc_status(struct tpm_chip *chip)
{
return inb(chip->vendor.base + NSC_STATUS);
}
static bool tpm_nsc_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == NSC_STATUS_RDY);
}
static const struct file_operations nsc_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = tpm_open,
.read = tpm_read,
.write = tpm_write,
.release = tpm_release,
};
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel);
static struct attribute * nsc_attrs[] = {
&dev_attr_pubek.attr,
&dev_attr_pcrs.attr,
&dev_attr_caps.attr,
&dev_attr_cancel.attr,
NULL,
};
static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
static const struct tpm_vendor_specific tpm_nsc = {
.recv = tpm_nsc_recv,
.send = tpm_nsc_send,
.cancel = tpm_nsc_cancel,
.status = tpm_nsc_status,
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.req_canceled = tpm_nsc_req_canceled,
.attr_group = &nsc_attr_grp,
.miscdev = { .fops = &nsc_ops, },
};
static struct platform_device *pdev = NULL;
static void tpm_nsc_remove(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if ( chip ) {
release_region(chip->vendor.base, 2);
tpm_remove_hardware(chip->dev);
}
}
static SIMPLE_DEV_PM_OPS(tpm_nsc_pm, tpm_pm_suspend, tpm_pm_resume);
static struct platform_driver nsc_drv = {
.driver = {
.name = "tpm_nsc",
.owner = THIS_MODULE,
.pm = &tpm_nsc_pm,
},
};
static int __init init_nsc(void)
{
int rc = 0;
int lo, hi, err;
int nscAddrBase = TPM_ADDR;
struct tpm_chip *chip;
unsigned long base;
/* verify that it is a National part (SID) */
if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
(tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6)
return -ENODEV;
}
err = platform_driver_register(&nsc_drv);
if (err)
return err;
hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
base = (hi<<8) | lo;
/* enable the DPM module */
tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
pdev = platform_device_alloc("tpm_nscl0", -1);
if (!pdev) {
rc = -ENOMEM;
goto err_unreg_drv;
}
pdev->num_resources = 0;
pdev->dev.driver = &nsc_drv.driver;
pdev->dev.release = tpm_nsc_remove;
if ((rc = platform_device_add(pdev)) < 0)
goto err_put_dev;
if (request_region(base, 2, "tpm_nsc0") == NULL ) {
rc = -EBUSY;
goto err_del_dev;
}
if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
rc = -ENODEV;
goto err_rel_reg;
}
dev_dbg(&pdev->dev, "NSC TPM detected\n");
dev_dbg(&pdev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
tpm_read_index(nscAddrBase,0x27));
dev_dbg(&pdev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n",
(tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n",
(tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n",
tpm_read_index(nscAddrBase,0x70));
dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n",
tpm_read_index(nscAddrBase,0x71));
dev_dbg(&pdev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
dev_dbg(&pdev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
dev_info(&pdev->dev,
"NSC TPM revision %d\n",
tpm_read_index(nscAddrBase, 0x27) & 0x1F);
chip->vendor.base = base;
return 0;
err_rel_reg:
release_region(base, 2);
err_del_dev:
platform_device_del(pdev);
err_put_dev:
platform_device_put(pdev);
err_unreg_drv:
platform_driver_unregister(&nsc_drv);
return rc;
}
static void __exit cleanup_nsc(void)
{
if (pdev) {
tpm_nsc_remove(&pdev->dev);
platform_device_unregister(pdev);
}
platform_driver_unregister(&nsc_drv);
}
module_init(init_nsc);
module_exit(cleanup_nsc);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");