linux_dsm_epyc7002/drivers/cpuidle/cpuidle-psci.c
Linus Torvalds df2fbf5bfa - Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)
 
 - Use the PM QoS frequency changes for the devfreq cooling device (Matthias
   Kaehlcke)
 
 - Remove duplicate error messages from platform_get_irq() error handling
   (Markus Elfring)
 
 - Add support for the bandgap sensors (Keerthy)
 
 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
 
 - Add Renesas R-Car maintainer entry (Niklas Söderlund)
 
 - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC
   thermal (Sudip Mukherjee)
 
 - Add latency constraint for the idle injection, the DT binding and the change
   the registering function (Daniel Lezcano)
 
 - Convert the thermal framework binding to the Yaml schema (Amit Kucheria)
 
 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva)
 
 - Thermal framework cleanups (alphabetic order for heads, replace module.h by
   export.h, make file naming consistent) (Amit Kucheria)
 
 - Merge tsens-common into the tsens driver (Amit Kucheria)
 
 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
 
 - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver
   (Niklas Söderlund)
 
 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang)
 
 - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x
   thermal driver - trivial conflicts fixed (Matthew Garrett)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP
 6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M
 D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv
 M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr
 O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF
 zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG
 dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw==
 =T+RI
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...
2020-06-12 14:10:21 -07:00

365 lines
8.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* PSCI CPU idle driver.
*
* Copyright (C) 2019 ARM Ltd.
* Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
*/
#define pr_fmt(fmt) "CPUidle PSCI: " fmt
#include <linux/cpuhotplug.h>
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/psci.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <asm/cpuidle.h>
#include "cpuidle-psci.h"
#include "dt_idle_states.h"
struct psci_cpuidle_data {
u32 *psci_states;
struct device *dev;
};
static DEFINE_PER_CPU_READ_MOSTLY(struct psci_cpuidle_data, psci_cpuidle_data);
static DEFINE_PER_CPU(u32, domain_state);
static bool psci_cpuidle_use_cpuhp __initdata;
void psci_set_domain_state(u32 state)
{
__this_cpu_write(domain_state, state);
}
static inline u32 psci_get_domain_state(void)
{
return __this_cpu_read(domain_state);
}
static inline int psci_enter_state(int idx, u32 state)
{
return CPU_PM_CPU_IDLE_ENTER_PARAM(psci_cpu_suspend_enter, idx, state);
}
static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
struct psci_cpuidle_data *data = this_cpu_ptr(&psci_cpuidle_data);
u32 *states = data->psci_states;
struct device *pd_dev = data->dev;
u32 state;
int ret;
ret = cpu_pm_enter();
if (ret)
return -1;
/* Do runtime PM to manage a hierarchical CPU toplogy. */
pm_runtime_put_sync_suspend(pd_dev);
state = psci_get_domain_state();
if (!state)
state = states[idx];
ret = psci_cpu_suspend_enter(state) ? -1 : idx;
pm_runtime_get_sync(pd_dev);
cpu_pm_exit();
/* Clear the domain state to start fresh when back from idle. */
psci_set_domain_state(0);
return ret;
}
static int psci_idle_cpuhp_up(unsigned int cpu)
{
struct device *pd_dev = __this_cpu_read(psci_cpuidle_data.dev);
if (pd_dev)
pm_runtime_get_sync(pd_dev);
return 0;
}
static int psci_idle_cpuhp_down(unsigned int cpu)
{
struct device *pd_dev = __this_cpu_read(psci_cpuidle_data.dev);
if (pd_dev) {
pm_runtime_put_sync(pd_dev);
/* Clear domain state to start fresh at next online. */
psci_set_domain_state(0);
}
return 0;
}
static void __init psci_idle_init_cpuhp(void)
{
int err;
if (!psci_cpuidle_use_cpuhp)
return;
err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
"cpuidle/psci:online",
psci_idle_cpuhp_up,
psci_idle_cpuhp_down);
if (err)
pr_warn("Failed %d while setup cpuhp state\n", err);
}
static int psci_enter_idle_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
u32 *state = __this_cpu_read(psci_cpuidle_data.psci_states);
return psci_enter_state(idx, state[idx]);
}
static struct cpuidle_driver psci_idle_driver __initdata = {
.name = "psci_idle",
.owner = THIS_MODULE,
/*
* PSCI idle states relies on architectural WFI to
* be represented as state index 0.
*/
.states[0] = {
.enter = psci_enter_idle_state,
.exit_latency = 1,
.target_residency = 1,
.power_usage = UINT_MAX,
.name = "WFI",
.desc = "ARM WFI",
}
};
static const struct of_device_id psci_idle_state_match[] __initconst = {
{ .compatible = "arm,idle-state",
.data = psci_enter_idle_state },
{ },
};
int __init psci_dt_parse_state_node(struct device_node *np, u32 *state)
{
int err = of_property_read_u32(np, "arm,psci-suspend-param", state);
if (err) {
pr_warn("%pOF missing arm,psci-suspend-param property\n", np);
return err;
}
if (!psci_power_state_is_valid(*state)) {
pr_warn("Invalid PSCI power state %#x\n", *state);
return -EINVAL;
}
return 0;
}
static int __init psci_dt_cpu_init_topology(struct cpuidle_driver *drv,
struct psci_cpuidle_data *data,
unsigned int state_count, int cpu)
{
/* Currently limit the hierarchical topology to be used in OSI mode. */
if (!psci_has_osi_support())
return 0;
data->dev = psci_dt_attach_cpu(cpu);
if (IS_ERR_OR_NULL(data->dev))
return PTR_ERR_OR_ZERO(data->dev);
/*
* Using the deepest state for the CPU to trigger a potential selection
* of a shared state for the domain, assumes the domain states are all
* deeper states.
*/
drv->states[state_count - 1].enter = psci_enter_domain_idle_state;
psci_cpuidle_use_cpuhp = true;
return 0;
}
static int __init psci_dt_cpu_init_idle(struct cpuidle_driver *drv,
struct device_node *cpu_node,
unsigned int state_count, int cpu)
{
int i, ret = 0;
u32 *psci_states;
struct device_node *state_node;
struct psci_cpuidle_data *data = per_cpu_ptr(&psci_cpuidle_data, cpu);
state_count++; /* Add WFI state too */
psci_states = kcalloc(state_count, sizeof(*psci_states), GFP_KERNEL);
if (!psci_states)
return -ENOMEM;
for (i = 1; i < state_count; i++) {
state_node = of_get_cpu_state_node(cpu_node, i - 1);
if (!state_node)
break;
ret = psci_dt_parse_state_node(state_node, &psci_states[i]);
of_node_put(state_node);
if (ret)
goto free_mem;
pr_debug("psci-power-state %#x index %d\n", psci_states[i], i);
}
if (i != state_count) {
ret = -ENODEV;
goto free_mem;
}
/* Initialize optional data, used for the hierarchical topology. */
ret = psci_dt_cpu_init_topology(drv, data, state_count, cpu);
if (ret < 0)
goto free_mem;
/* Idle states parsed correctly, store them in the per-cpu struct. */
data->psci_states = psci_states;
return 0;
free_mem:
kfree(psci_states);
return ret;
}
static __init int psci_cpu_init_idle(struct cpuidle_driver *drv,
unsigned int cpu, unsigned int state_count)
{
struct device_node *cpu_node;
int ret;
/*
* If the PSCI cpu_suspend function hook has not been initialized
* idle states must not be enabled, so bail out
*/
if (!psci_ops.cpu_suspend)
return -EOPNOTSUPP;
cpu_node = of_cpu_device_node_get(cpu);
if (!cpu_node)
return -ENODEV;
ret = psci_dt_cpu_init_idle(drv, cpu_node, state_count, cpu);
of_node_put(cpu_node);
return ret;
}
static int __init psci_idle_init_cpu(int cpu)
{
struct cpuidle_driver *drv;
struct device_node *cpu_node;
const char *enable_method;
int ret = 0;
cpu_node = of_cpu_device_node_get(cpu);
if (!cpu_node)
return -ENODEV;
/*
* Check whether the enable-method for the cpu is PSCI, fail
* if it is not.
*/
enable_method = of_get_property(cpu_node, "enable-method", NULL);
if (!enable_method || (strcmp(enable_method, "psci")))
ret = -ENODEV;
of_node_put(cpu_node);
if (ret)
return ret;
drv = kmemdup(&psci_idle_driver, sizeof(*drv), GFP_KERNEL);
if (!drv)
return -ENOMEM;
drv->cpumask = (struct cpumask *)cpumask_of(cpu);
/*
* Initialize idle states data, starting at index 1, since
* by default idle state 0 is the quiescent state reached
* by the cpu by executing the wfi instruction.
*
* If no DT idle states are detected (ret == 0) let the driver
* initialization fail accordingly since there is no reason to
* initialize the idle driver if only wfi is supported, the
* default archictectural back-end already executes wfi
* on idle entry.
*/
ret = dt_init_idle_driver(drv, psci_idle_state_match, 1);
if (ret <= 0) {
ret = ret ? : -ENODEV;
goto out_kfree_drv;
}
/*
* Initialize PSCI idle states.
*/
ret = psci_cpu_init_idle(drv, cpu, ret);
if (ret) {
pr_err("CPU %d failed to PSCI idle\n", cpu);
goto out_kfree_drv;
}
ret = cpuidle_register(drv, NULL);
if (ret)
goto out_kfree_drv;
cpuidle_cooling_register(drv);
return 0;
out_kfree_drv:
kfree(drv);
return ret;
}
/*
* psci_idle_init - Initializes PSCI cpuidle driver
*
* Initializes PSCI cpuidle driver for all CPUs, if any CPU fails
* to register cpuidle driver then rollback to cancel all CPUs
* registration.
*/
static int __init psci_idle_init(void)
{
int cpu, ret;
struct cpuidle_driver *drv;
struct cpuidle_device *dev;
for_each_possible_cpu(cpu) {
ret = psci_idle_init_cpu(cpu);
if (ret)
goto out_fail;
}
psci_idle_init_cpuhp();
return 0;
out_fail:
while (--cpu >= 0) {
dev = per_cpu(cpuidle_devices, cpu);
drv = cpuidle_get_cpu_driver(dev);
cpuidle_unregister(drv);
kfree(drv);
}
return ret;
}
device_initcall(psci_idle_init);