mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 13:46:42 +07:00
aeec56e331
The basic GPIO controllers may be found in various on-board FPGA and ASIC solutions that are used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc. These controllers may not provide any means of pin setup (in/out/open drain). The driver supports: - 8/16/32/64 bits registers; - GPIO controllers with clear/set registers; - GPIO controllers with a single "data" register; - Big endian bits/GPIOs ordering (mostly used on PowerPC). Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@linux.intel.com>, Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
298 lines
8.0 KiB
C
298 lines
8.0 KiB
C
/*
|
|
* Driver for basic memory-mapped GPIO controllers.
|
|
*
|
|
* Copyright 2008 MontaVista Software, Inc.
|
|
* Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
|
|
* ...`` ```````..
|
|
* ..The simplest form of a GPIO controller that the driver supports is``
|
|
* `.just a single "data" register, where GPIO state can be read and/or `
|
|
* `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
|
|
* `````````
|
|
___
|
|
_/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,...
|
|
__________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO .
|
|
o ` ~~~~\___/~~~~ ` controller in FPGA is ,.`
|
|
`....trivial..'~`.```.```
|
|
* ```````
|
|
* .```````~~~~`..`.``.``.
|
|
* . The driver supports `... ,..```.`~~~```````````````....````.``,,
|
|
* . big-endian notation, just`. .. A bit more sophisticated controllers ,
|
|
* . register the device with -be`. .with a pair of set/clear-bit registers ,
|
|
* `.. suffix. ```~~`````....`.` . affecting the data register and the .`
|
|
* ``.`.``...``` ```.. output pins are also supported.`
|
|
* ^^ `````.`````````.,``~``~``~~``````
|
|
* . ^^
|
|
* ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
|
|
* .. The expectation is that in at least some cases . ,-~~~-,
|
|
* .this will be used with roll-your-own ASIC/FPGA .` \ /
|
|
* .logic in Verilog or VHDL. ~~~`````````..`````~~` \ /
|
|
* ..````````......``````````` \o_
|
|
* |
|
|
* ^^ / \
|
|
*
|
|
* ...`````~~`.....``.`..........``````.`.``.```........``.
|
|
* ` 8, 16, 32 and 64 bits registers are supported, and``.
|
|
* . the number of GPIOs is determined by the width of ~
|
|
* .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
|
|
* `.......````.```
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/basic_mmio_gpio.h>
|
|
|
|
struct bgpio_chip {
|
|
struct gpio_chip gc;
|
|
void __iomem *reg_dat;
|
|
void __iomem *reg_set;
|
|
void __iomem *reg_clr;
|
|
|
|
/* Number of bits (GPIOs): <register width> * 8. */
|
|
int bits;
|
|
|
|
/*
|
|
* Some GPIO controllers work with the big-endian bits notation,
|
|
* e.g. in a 8-bits register, GPIO7 is the least significant bit.
|
|
*/
|
|
int big_endian_bits;
|
|
|
|
/*
|
|
* Used to lock bgpio_chip->data. Also, this is needed to keep
|
|
* shadowed and real data registers writes together.
|
|
*/
|
|
spinlock_t lock;
|
|
|
|
/* Shadowed data register to clear/set bits safely. */
|
|
unsigned long data;
|
|
};
|
|
|
|
static struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct bgpio_chip, gc);
|
|
}
|
|
|
|
static unsigned long bgpio_in(struct bgpio_chip *bgc)
|
|
{
|
|
switch (bgc->bits) {
|
|
case 8:
|
|
return __raw_readb(bgc->reg_dat);
|
|
case 16:
|
|
return __raw_readw(bgc->reg_dat);
|
|
case 32:
|
|
return __raw_readl(bgc->reg_dat);
|
|
#if BITS_PER_LONG >= 64
|
|
case 64:
|
|
return __raw_readq(bgc->reg_dat);
|
|
#endif
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void bgpio_out(struct bgpio_chip *bgc, void __iomem *reg,
|
|
unsigned long data)
|
|
{
|
|
switch (bgc->bits) {
|
|
case 8:
|
|
__raw_writeb(data, reg);
|
|
return;
|
|
case 16:
|
|
__raw_writew(data, reg);
|
|
return;
|
|
case 32:
|
|
__raw_writel(data, reg);
|
|
return;
|
|
#if BITS_PER_LONG >= 64
|
|
case 64:
|
|
__raw_writeq(data, reg);
|
|
return;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin)
|
|
{
|
|
if (bgc->big_endian_bits)
|
|
return 1 << (bgc->bits - 1 - pin);
|
|
else
|
|
return 1 << pin;
|
|
}
|
|
|
|
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
struct bgpio_chip *bgc = to_bgpio_chip(gc);
|
|
|
|
return bgpio_in(bgc) & bgpio_pin2mask(bgc, gpio);
|
|
}
|
|
|
|
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
|
|
{
|
|
struct bgpio_chip *bgc = to_bgpio_chip(gc);
|
|
unsigned long mask = bgpio_pin2mask(bgc, gpio);
|
|
unsigned long flags;
|
|
|
|
if (bgc->reg_set) {
|
|
if (val)
|
|
bgpio_out(bgc, bgc->reg_set, mask);
|
|
else
|
|
bgpio_out(bgc, bgc->reg_clr, mask);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&bgc->lock, flags);
|
|
|
|
if (val)
|
|
bgc->data |= mask;
|
|
else
|
|
bgc->data &= ~mask;
|
|
|
|
bgpio_out(bgc, bgc->reg_dat, bgc->data);
|
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags);
|
|
}
|
|
|
|
static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
|
|
{
|
|
bgpio_set(gc, gpio, val);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit bgpio_probe(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *platid = platform_get_device_id(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
struct bgpio_pdata *pdata = dev_get_platdata(dev);
|
|
struct bgpio_chip *bgc;
|
|
struct resource *res_dat;
|
|
struct resource *res_set;
|
|
struct resource *res_clr;
|
|
resource_size_t dat_sz;
|
|
int bits;
|
|
int ret;
|
|
|
|
res_dat = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
|
|
if (!res_dat)
|
|
return -EINVAL;
|
|
|
|
dat_sz = resource_size(res_dat);
|
|
if (!is_power_of_2(dat_sz))
|
|
return -EINVAL;
|
|
|
|
bits = dat_sz * 8;
|
|
if (bits > BITS_PER_LONG)
|
|
return -EINVAL;
|
|
|
|
bgc = devm_kzalloc(dev, sizeof(*bgc), GFP_KERNEL);
|
|
if (!bgc)
|
|
return -ENOMEM;
|
|
|
|
bgc->reg_dat = devm_ioremap(dev, res_dat->start, dat_sz);
|
|
if (!bgc->reg_dat)
|
|
return -ENOMEM;
|
|
|
|
res_set = platform_get_resource_byname(pdev, IORESOURCE_MEM, "set");
|
|
res_clr = platform_get_resource_byname(pdev, IORESOURCE_MEM, "clr");
|
|
if (res_set && res_clr) {
|
|
if (resource_size(res_set) != resource_size(res_clr) ||
|
|
resource_size(res_set) != dat_sz)
|
|
return -EINVAL;
|
|
|
|
bgc->reg_set = devm_ioremap(dev, res_set->start, dat_sz);
|
|
bgc->reg_clr = devm_ioremap(dev, res_clr->start, dat_sz);
|
|
if (!bgc->reg_set || !bgc->reg_clr)
|
|
return -ENOMEM;
|
|
} else if (res_set || res_clr) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_init(&bgc->lock);
|
|
|
|
bgc->bits = bits;
|
|
bgc->big_endian_bits = !strcmp(platid->name, "basic-mmio-gpio-be");
|
|
bgc->data = bgpio_in(bgc);
|
|
|
|
bgc->gc.ngpio = bits;
|
|
bgc->gc.direction_input = bgpio_dir_in;
|
|
bgc->gc.direction_output = bgpio_dir_out;
|
|
bgc->gc.get = bgpio_get;
|
|
bgc->gc.set = bgpio_set;
|
|
bgc->gc.dev = dev;
|
|
bgc->gc.label = dev_name(dev);
|
|
|
|
if (pdata)
|
|
bgc->gc.base = pdata->base;
|
|
else
|
|
bgc->gc.base = -1;
|
|
|
|
dev_set_drvdata(dev, bgc);
|
|
|
|
ret = gpiochip_add(&bgc->gc);
|
|
if (ret)
|
|
dev_err(dev, "gpiochip_add() failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit bgpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct bgpio_chip *bgc = dev_get_drvdata(&pdev->dev);
|
|
|
|
return gpiochip_remove(&bgc->gc);
|
|
}
|
|
|
|
static const struct platform_device_id bgpio_id_table[] = {
|
|
{ "basic-mmio-gpio", },
|
|
{ "basic-mmio-gpio-be", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, bgpio_id_table);
|
|
|
|
static struct platform_driver bgpio_driver = {
|
|
.driver = {
|
|
.name = "basic-mmio-gpio",
|
|
},
|
|
.id_table = bgpio_id_table,
|
|
.probe = bgpio_probe,
|
|
.remove = __devexit_p(bgpio_remove),
|
|
};
|
|
|
|
static int __init bgpio_init(void)
|
|
{
|
|
return platform_driver_register(&bgpio_driver);
|
|
}
|
|
module_init(bgpio_init);
|
|
|
|
static void __exit bgpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&bgpio_driver);
|
|
}
|
|
module_exit(bgpio_exit);
|
|
|
|
MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
|
|
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|