linux_dsm_epyc7002/drivers/net/wireless/brcm80211/brcmfmac
Arend van Spriel fe353b24c3 brcmfmac: rework credit pickup to assure consistent handling
Reworked brcmf_skb_pick_up_credit() so it can be used for both
fcmode flavours in the same way.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12 15:02:17 -04:00
..
bcmsdh_sdmmc.c drivers/net/wireless/brcm80211/brcmfmac: add missing platform_driver owner 2013-05-22 15:09:15 -04:00
bcmsdh.c brcmfmac: define and use platform specific data for SDIO. 2013-04-12 14:27:55 -04:00
btcoex.c brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
btcoex.h brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
dhd_bus.h brcmfmac: add optional bus callback definition for tx queue cleanup 2013-04-03 15:07:05 -04:00
dhd_cdc.c brcmfmac: avoid error output on header only packet 2013-04-03 15:07:07 -04:00
dhd_common.c brcmfmac: Turn off ARP offloading when configured for AP. 2013-05-28 13:43:08 -04:00
dhd_dbg.c brcmfmac: handle firmware signalling destination entry state 2013-04-08 15:28:41 -04:00
dhd_dbg.h brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
dhd_linux.c brcmfmac: Take bus flowcontrol at credit mgmt into account. 2013-06-12 15:02:16 -04:00
dhd_proto.h brcmfmac: add parameter to brcmf_proto_hdrpush() for data offset 2013-03-06 16:28:50 -05:00
dhd_sdio.c brcmfmac: Take bus flowcontrol at credit mgmt into account. 2013-06-12 15:02:16 -04:00
dhd.h brcmfmac: Take bus flowcontrol at credit mgmt into account. 2013-06-12 15:02:16 -04:00
fweh.c brcmfmac: free net device when registration fails 2013-05-28 13:43:09 -04:00
fweh.h brcmfmac: only use ifidx from BDC header in brcmf_rx_frames() 2013-04-08 15:28:48 -04:00
fwil_types.h brcmfmac: Turn off ARP offloading when configured for AP. 2013-05-28 13:43:08 -04:00
fwil.c brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
fwil.h brcmfmac: use struct brcmf_if as interface object for fwil functions 2012-10-29 15:28:27 -04:00
fwsignal.c brcmfmac: rework credit pickup to assure consistent handling 2013-06-12 15:02:17 -04:00
fwsignal.h brcmfmac: Take bus flowcontrol at credit mgmt into account. 2013-06-12 15:02:16 -04:00
Makefile brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
p2p.c brcmfmac: use struct net_device::destructor to remove interfaces 2013-05-28 13:43:09 -04:00
p2p.h brcmfmac: Add tx p2p off-channel support. 2013-02-08 14:51:43 -05:00
sdio_chip.c brcmfmac: Add drive strength programming for SDIO 43143. 2013-04-12 14:27:55 -04:00
sdio_chip.h brcmfmac: add support for dongle ARM CR4 core 2013-04-12 14:27:54 -04:00
sdio_host.h brcmfmac: define and use platform specific data for SDIO. 2013-04-12 14:27:55 -04:00
tracepoint.c brcmfmac: introduce tracepoints for message logging 2013-03-06 16:28:31 -05:00
tracepoint.h brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
usb_rdl.h brcm80211: fmac: add USB support for bcm43235/6/8 chipsets 2012-02-22 14:48:53 -05:00
usb.c brcmfmac: Take bus flowcontrol at credit mgmt into account. 2013-06-12 15:02:16 -04:00
usb.h brcmfmac: usb suspend/resume. 2012-11-16 14:28:47 -05:00
wl_cfg80211.c brcmfmac: Disable powersave mode for P2P link. 2013-05-28 13:43:10 -04:00
wl_cfg80211.h brcmfmac: add additional parameter to brcmf_free_vif() 2013-05-28 13:43:09 -04:00