mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 16:06:42 +07:00
6f09479758
Add the first basic pktgen samples script pktgen_sample01_simple.sh, which demonstrates the a simple use of the helper functions. Removing pktgen.conf-1-1 as that example should be covered now. The naming scheme pktgen_sampleNN, where NN is a number, should encourage reading the samples in a specific order. Script cause pktgen sending with a single thread and single interface, and introduce flow variation via random UDP source port. Usage example and help: ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2 Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX -i : ($DEV) output interface/device (required) -s : ($PKT_SIZE) packet size -d : ($DEST_IP) destination IP -m : ($DST_MAC) destination MAC-addr -c : ($SKB_CLONE) SKB clones send before alloc new SKB -v : ($VERBOSE) verbose -x : ($DEBUG) debug Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
72 lines
1.8 KiB
Bash
Executable File
72 lines
1.8 KiB
Bash
Executable File
#!/bin/bash
|
|
#
|
|
# Simple example:
|
|
# * pktgen sending with single thread and single interface
|
|
# * flow variation via random UDP source port
|
|
#
|
|
basedir=`dirname $0`
|
|
source ${basedir}/functions.sh
|
|
root_check_run_with_sudo "$@"
|
|
|
|
# Parameter parsing via include
|
|
# - go look in parameters.sh to see which setting are avail
|
|
# - required param is the interface "-i" stored in $DEV
|
|
source ${basedir}/parameters.sh
|
|
#
|
|
# Set some default params, if they didn't get set
|
|
[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
|
|
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
|
|
# Example enforce param "-m" for dst_mac
|
|
[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
|
|
|
|
# Base Config
|
|
DELAY="0" # Zero means max speed
|
|
COUNT="100000" # Zero means indefinitely
|
|
|
|
# Flow variation random source port between min and max
|
|
UDP_MIN=9
|
|
UDP_MAX=109
|
|
|
|
# General cleanup everything since last run
|
|
# (especially important if other threads were configured by other scripts)
|
|
pg_ctrl "reset"
|
|
|
|
# Add remove all other devices and add_device $DEV to thread 0
|
|
thread=0
|
|
pg_thread $thread "rem_device_all"
|
|
pg_thread $thread "add_device" $DEV
|
|
|
|
# How many packets to send (zero means indefinitely)
|
|
pg_set $DEV "count $COUNT"
|
|
|
|
# Reduce alloc cost by sending same SKB many times
|
|
# - this obviously affects the randomness within the packet
|
|
pg_set $DEV "clone_skb $CLONE_SKB"
|
|
|
|
# Set packet size
|
|
pg_set $DEV "pkt_size $PKT_SIZE"
|
|
|
|
# Delay between packets (zero means max speed)
|
|
pg_set $DEV "delay $DELAY"
|
|
|
|
# Flag example disabling timestamping
|
|
pg_set $DEV "flag NO_TIMESTAMP"
|
|
|
|
# Destination
|
|
pg_set $DEV "dst_mac $DST_MAC"
|
|
pg_set $DEV "dst $DEST_IP"
|
|
|
|
# Setup random UDP port src range
|
|
pg_set $DEV "flag UDPSRC_RND"
|
|
pg_set $DEV "udp_src_min $UDP_MIN"
|
|
pg_set $DEV "udp_src_max $UDP_MAX"
|
|
|
|
# start_run
|
|
echo "Running... ctrl^C to stop" >&2
|
|
pg_ctrl "start"
|
|
echo "Done" >&2
|
|
|
|
# Print results
|
|
echo "Result device: $DEV"
|
|
cat /proc/net/pktgen/$DEV
|