Ron Diskin 7d0314b11c net/mlx5e: Modify uplink state on interface up/down ... When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>		2020-07-28 12:55:51 -07:00
..
accel.h
cq.h
device.h
doorbell.h
driver.h	net/mlx5e: Fix port buffers cell size value	2020-07-09 19:27:07 -07:00
eq.h
eswitch.h
fs_helpers.h
fs.h
mlx5_ifc_fpga.h
mlx5_ifc.h	net/mlx5e: Modify uplink state on interface up/down	2020-07-28 12:55:51 -07:00
port.h
qp.h
transobj.h
vport.h