mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 03:20:53 +07:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
39 lines
1.6 KiB
Plaintext
39 lines
1.6 KiB
Plaintext
|
|
PowerNow! and Cool'n'Quiet are AMD names for frequency
|
|
management capabilities in AMD processors. As the hardware
|
|
implementation changes in new generations of the processors,
|
|
there is a different cpu-freq driver for each generation.
|
|
|
|
Note that the driver's will not load on the "wrong" hardware,
|
|
so it is safe to try each driver in turn when in doubt as to
|
|
which is the correct driver.
|
|
|
|
Note that the functionality to change frequency (and voltage)
|
|
is not available in all processors. The drivers will refuse
|
|
to load on processors without this capability. The capability
|
|
is detected with the cpuid instruction.
|
|
|
|
The drivers use BIOS supplied tables to obtain frequency and
|
|
voltage information appropriate for a particular platform.
|
|
Frequency transitions will be unavailable if the BIOS does
|
|
not supply these tables.
|
|
|
|
6th Generation: powernow-k6
|
|
|
|
7th Generation: powernow-k7: Athlon, Duron, Geode.
|
|
|
|
8th Generation: powernow-k8: Athlon, Athlon 64, Opteron, Sempron.
|
|
Documentation on this functionality in 8th generation processors
|
|
is available in the "BIOS and Kernel Developer's Guide", publication
|
|
26094, in chapter 9, available for download from www.amd.com.
|
|
|
|
BIOS supplied data, for powernow-k7 and for powernow-k8, may be
|
|
from either the PSB table or from ACPI objects. The ACPI support
|
|
is only available if the kernel config sets CONFIG_ACPI_PROCESSOR.
|
|
The powernow-k8 driver will attempt to use ACPI if so configured,
|
|
and fall back to PST if that fails.
|
|
The powernow-k7 driver will try to use the PSB support first, and
|
|
fall back to ACPI if the PSB support fails. A module parameter,
|
|
acpi_force, is provided to force ACPI support to be used instead
|
|
of PSB support.
|