mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 08:16:49 +07:00
03df0f6294
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port device. It has a built-in programmable execution engine that can be programmed to operate as almost any serial bus (I2C, SPI, EasyScale, and others). This patch adds a driver for this controller device. The driver does not expose a user-land interface. Protocol drivers built on top of this layer are expected to remain in-kernel. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
477 lines
11 KiB
C
477 lines
11 KiB
C
/*
|
|
* Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ti_ssp.h>
|
|
|
|
/* Register Offsets */
|
|
#define REG_REV 0x00
|
|
#define REG_IOSEL_1 0x04
|
|
#define REG_IOSEL_2 0x08
|
|
#define REG_PREDIV 0x0c
|
|
#define REG_INTR_ST 0x10
|
|
#define REG_INTR_EN 0x14
|
|
#define REG_TEST_CTRL 0x18
|
|
|
|
/* Per port registers */
|
|
#define PORT_CFG_2 0x00
|
|
#define PORT_ADDR 0x04
|
|
#define PORT_DATA 0x08
|
|
#define PORT_CFG_1 0x0c
|
|
#define PORT_STATE 0x10
|
|
|
|
#define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT)
|
|
#define SSP_PORT_CLKRATE_MASK 0x0f
|
|
|
|
#define SSP_SEQRAM_WR_EN BIT(4)
|
|
#define SSP_SEQRAM_RD_EN BIT(5)
|
|
#define SSP_START BIT(15)
|
|
#define SSP_BUSY BIT(10)
|
|
#define SSP_PORT_ASL BIT(7)
|
|
#define SSP_PORT_CFO1 BIT(6)
|
|
|
|
#define SSP_PORT_SEQRAM_SIZE 32
|
|
|
|
static const int ssp_port_base[] = {0x040, 0x080};
|
|
static const int ssp_port_seqram[] = {0x100, 0x180};
|
|
|
|
struct ti_ssp {
|
|
struct resource *res;
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
spinlock_t lock;
|
|
struct clk *clk;
|
|
int irq;
|
|
wait_queue_head_t wqh;
|
|
|
|
/*
|
|
* Some of the iosel2 register bits always read-back as 0, we need to
|
|
* remember these values so that we don't clobber previously set
|
|
* values.
|
|
*/
|
|
u32 iosel2;
|
|
};
|
|
|
|
static inline struct ti_ssp *dev_to_ssp(struct device *dev)
|
|
{
|
|
return dev_get_drvdata(dev->parent);
|
|
}
|
|
|
|
static inline int dev_to_port(struct device *dev)
|
|
{
|
|
return to_platform_device(dev)->id;
|
|
}
|
|
|
|
/* Register Access Helpers, rmw() functions need to run locked */
|
|
static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
|
|
{
|
|
return __raw_readl(ssp->regs + reg);
|
|
}
|
|
|
|
static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
|
|
{
|
|
__raw_writel(val, ssp->regs + reg);
|
|
}
|
|
|
|
static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
|
|
{
|
|
ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
|
|
}
|
|
|
|
static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
|
|
{
|
|
return ssp_read(ssp, ssp_port_base[port] + reg);
|
|
}
|
|
|
|
static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
|
|
u32 val)
|
|
{
|
|
ssp_write(ssp, ssp_port_base[port] + reg, val);
|
|
}
|
|
|
|
static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
|
|
u32 mask, u32 bits)
|
|
{
|
|
ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
|
|
}
|
|
|
|
static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
|
|
u32 bits)
|
|
{
|
|
ssp_port_rmw(ssp, port, reg, bits, 0);
|
|
}
|
|
|
|
static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
|
|
u32 bits)
|
|
{
|
|
ssp_port_rmw(ssp, port, reg, 0, bits);
|
|
}
|
|
|
|
/* Called to setup port clock mode, caller must hold ssp->lock */
|
|
static int __set_mode(struct ti_ssp *ssp, int port, int mode)
|
|
{
|
|
mode &= SSP_PORT_CONFIG_MASK;
|
|
ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ti_ssp_set_mode(struct device *dev, int mode)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev);
|
|
int ret;
|
|
|
|
spin_lock(&ssp->lock);
|
|
ret = __set_mode(ssp, port, mode);
|
|
spin_unlock(&ssp->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_set_mode);
|
|
|
|
/* Called to setup iosel2, caller must hold ssp->lock */
|
|
static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
|
|
{
|
|
ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
|
|
ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
|
|
}
|
|
|
|
/* Called to setup port iosel, caller must hold ssp->lock */
|
|
static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
|
|
{
|
|
unsigned val, shift = port ? 16 : 0;
|
|
|
|
/* IOSEL1 gets the least significant 16 bits */
|
|
val = ssp_read(ssp, REG_IOSEL_1);
|
|
val &= 0xffff << (port ? 0 : 16);
|
|
val |= (iosel & 0xffff) << (port ? 16 : 0);
|
|
ssp_write(ssp, REG_IOSEL_1, val);
|
|
|
|
/* IOSEL2 gets the most significant 16 bits */
|
|
val = (iosel >> 16) & 0x7;
|
|
__set_iosel2(ssp, 0x7 << shift, val << shift);
|
|
}
|
|
|
|
int ti_ssp_set_iosel(struct device *dev, u32 iosel)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev);
|
|
|
|
spin_lock(&ssp->lock);
|
|
__set_iosel(ssp, port, iosel);
|
|
spin_unlock(&ssp->lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_set_iosel);
|
|
|
|
int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev);
|
|
int i;
|
|
|
|
if (len > SSP_PORT_SEQRAM_SIZE)
|
|
return -ENOSPC;
|
|
|
|
spin_lock(&ssp->lock);
|
|
|
|
/* Enable SeqRAM access */
|
|
ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
|
|
|
|
/* Copy code */
|
|
for (i = 0; i < len; i++) {
|
|
__raw_writel(prog[i], ssp->regs + offs + 4*i +
|
|
ssp_port_seqram[port]);
|
|
}
|
|
|
|
/* Disable SeqRAM access */
|
|
ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
|
|
|
|
spin_unlock(&ssp->lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_load);
|
|
|
|
int ti_ssp_raw_read(struct device *dev)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev);
|
|
int shift = port ? 27 : 11;
|
|
|
|
return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_raw_read);
|
|
|
|
int ti_ssp_raw_write(struct device *dev, u32 val)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev), shift;
|
|
|
|
spin_lock(&ssp->lock);
|
|
|
|
shift = port ? 22 : 6;
|
|
val &= 0xf;
|
|
__set_iosel2(ssp, 0xf << shift, val << shift);
|
|
|
|
spin_unlock(&ssp->lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_raw_write);
|
|
|
|
static inline int __xfer_done(struct ti_ssp *ssp, int port)
|
|
{
|
|
return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
|
|
}
|
|
|
|
int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
|
|
{
|
|
struct ti_ssp *ssp = dev_to_ssp(dev);
|
|
int port = dev_to_port(dev);
|
|
int ret;
|
|
|
|
if (pc & ~(0x3f))
|
|
return -EINVAL;
|
|
|
|
/* Grab ssp->lock to serialize rmw on ssp registers */
|
|
spin_lock(&ssp->lock);
|
|
|
|
ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
|
|
ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
|
|
ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
|
|
|
|
/* grab wait queue head lock to avoid race with the isr */
|
|
spin_lock_irq(&ssp->wqh.lock);
|
|
|
|
/* kick off sequence execution in hardware */
|
|
ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
|
|
|
|
/* drop ssp lock; no register writes beyond this */
|
|
spin_unlock(&ssp->lock);
|
|
|
|
ret = wait_event_interruptible_locked_irq(ssp->wqh,
|
|
__xfer_done(ssp, port));
|
|
spin_unlock_irq(&ssp->wqh.lock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (output) {
|
|
*output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
|
|
(ssp_port_read(ssp, port, PORT_DATA) & 0xffff);
|
|
}
|
|
|
|
ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(ti_ssp_run);
|
|
|
|
static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
|
|
{
|
|
struct ti_ssp *ssp = dev_data;
|
|
|
|
spin_lock(&ssp->wqh.lock);
|
|
|
|
ssp_write(ssp, REG_INTR_ST, 0x3);
|
|
wake_up_locked(&ssp->wqh);
|
|
|
|
spin_unlock(&ssp->wqh.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __devinit ti_ssp_probe(struct platform_device *pdev)
|
|
{
|
|
static struct ti_ssp *ssp;
|
|
const struct ti_ssp_data *pdata = pdev->dev.platform_data;
|
|
int error = 0, prediv = 0xff, id;
|
|
unsigned long sysclk;
|
|
struct device *dev = &pdev->dev;
|
|
struct mfd_cell cells[2];
|
|
|
|
ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
|
|
if (!ssp) {
|
|
dev_err(dev, "cannot allocate device info\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ssp->dev = dev;
|
|
dev_set_drvdata(dev, ssp);
|
|
|
|
ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!ssp->res) {
|
|
error = -ENODEV;
|
|
dev_err(dev, "cannot determine register area\n");
|
|
goto error_res;
|
|
}
|
|
|
|
if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
|
|
pdev->name)) {
|
|
error = -ENOMEM;
|
|
dev_err(dev, "cannot claim register memory\n");
|
|
goto error_res;
|
|
}
|
|
|
|
ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
|
|
if (!ssp->regs) {
|
|
error = -ENOMEM;
|
|
dev_err(dev, "cannot map register memory\n");
|
|
goto error_map;
|
|
}
|
|
|
|
ssp->clk = clk_get(dev, NULL);
|
|
if (IS_ERR(ssp->clk)) {
|
|
error = PTR_ERR(ssp->clk);
|
|
dev_err(dev, "cannot claim device clock\n");
|
|
goto error_clk;
|
|
}
|
|
|
|
ssp->irq = platform_get_irq(pdev, 0);
|
|
if (ssp->irq < 0) {
|
|
error = -ENODEV;
|
|
dev_err(dev, "unknown irq\n");
|
|
goto error_irq;
|
|
}
|
|
|
|
error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
|
|
dev_name(dev), ssp);
|
|
if (error < 0) {
|
|
dev_err(dev, "cannot acquire irq\n");
|
|
goto error_irq;
|
|
}
|
|
|
|
spin_lock_init(&ssp->lock);
|
|
init_waitqueue_head(&ssp->wqh);
|
|
|
|
/* Power on and initialize SSP */
|
|
error = clk_enable(ssp->clk);
|
|
if (error) {
|
|
dev_err(dev, "cannot enable device clock\n");
|
|
goto error_enable;
|
|
}
|
|
|
|
/* Reset registers to a sensible known state */
|
|
ssp_write(ssp, REG_IOSEL_1, 0);
|
|
ssp_write(ssp, REG_IOSEL_2, 0);
|
|
ssp_write(ssp, REG_INTR_EN, 0x3);
|
|
ssp_write(ssp, REG_INTR_ST, 0x3);
|
|
ssp_write(ssp, REG_TEST_CTRL, 0);
|
|
ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
|
|
ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
|
|
ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
|
|
ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
|
|
|
|
sysclk = clk_get_rate(ssp->clk);
|
|
if (pdata && pdata->out_clock)
|
|
prediv = (sysclk / pdata->out_clock) - 1;
|
|
prediv = clamp(prediv, 0, 0xff);
|
|
ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
|
|
|
|
memset(cells, 0, sizeof(cells));
|
|
for (id = 0; id < 2; id++) {
|
|
const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
|
|
|
|
cells[id].id = id;
|
|
cells[id].name = data->dev_name;
|
|
cells[id].platform_data = data->pdata;
|
|
cells[id].data_size = data->pdata_size;
|
|
}
|
|
|
|
error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
|
|
if (error < 0) {
|
|
dev_err(dev, "cannot add mfd cells\n");
|
|
goto error_enable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_enable:
|
|
free_irq(ssp->irq, ssp);
|
|
error_irq:
|
|
clk_put(ssp->clk);
|
|
error_clk:
|
|
iounmap(ssp->regs);
|
|
error_map:
|
|
release_mem_region(ssp->res->start, resource_size(ssp->res));
|
|
error_res:
|
|
kfree(ssp);
|
|
return error;
|
|
}
|
|
|
|
static int __devexit ti_ssp_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ti_ssp *ssp = dev_get_drvdata(dev);
|
|
|
|
mfd_remove_devices(dev);
|
|
clk_disable(ssp->clk);
|
|
free_irq(ssp->irq, ssp);
|
|
clk_put(ssp->clk);
|
|
iounmap(ssp->regs);
|
|
release_mem_region(ssp->res->start, resource_size(ssp->res));
|
|
kfree(ssp);
|
|
dev_set_drvdata(dev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ti_ssp_driver = {
|
|
.probe = ti_ssp_probe,
|
|
.remove = __devexit_p(ti_ssp_remove),
|
|
.driver = {
|
|
.name = "ti-ssp",
|
|
.owner = THIS_MODULE,
|
|
}
|
|
};
|
|
|
|
static int __init ti_ssp_init(void)
|
|
{
|
|
return platform_driver_register(&ti_ssp_driver);
|
|
}
|
|
module_init(ti_ssp_init);
|
|
|
|
static void __exit ti_ssp_exit(void)
|
|
{
|
|
platform_driver_unregister(&ti_ssp_driver);
|
|
}
|
|
module_exit(ti_ssp_exit);
|
|
|
|
MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
|
|
MODULE_AUTHOR("Cyril Chemparathy");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:ti-ssp");
|