mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 06:59:28 +07:00
c2e5c951c2
This issue was detected by using the Coccinelle software. 1. Let us return directly if a call of the si2165_readreg8() function failed. 2. Reduce the scope for the local variables "ret" and "tmp" to one branch of an if statement. 3. Delete the jump label "err" then. 4. Return the value from a call of the si2165_writereg8() function without using an extra assignment for the variable "ret" at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1167 lines
25 KiB
C
1167 lines
25 KiB
C
/*
|
|
* Driver for Silicon Labs Si2161 DVB-T and Si2165 DVB-C/-T Demodulator
|
|
*
|
|
* Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* References:
|
|
* http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "dvb_math.h"
|
|
#include "si2165_priv.h"
|
|
#include "si2165.h"
|
|
|
|
/*
|
|
* Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx
|
|
* uses 16 MHz xtal
|
|
*
|
|
* Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx
|
|
* uses 24 MHz clock provided by tuner
|
|
*/
|
|
|
|
struct si2165_state {
|
|
struct i2c_adapter *i2c;
|
|
|
|
struct dvb_frontend fe;
|
|
|
|
struct si2165_config config;
|
|
|
|
u8 chip_revcode;
|
|
u8 chip_type;
|
|
|
|
/* calculated by xtal and div settings */
|
|
u32 fvco_hz;
|
|
u32 sys_clk;
|
|
u32 adc_clk;
|
|
|
|
bool has_dvbc;
|
|
bool has_dvbt;
|
|
bool firmware_loaded;
|
|
};
|
|
|
|
#define DEBUG_OTHER 0x01
|
|
#define DEBUG_I2C_WRITE 0x02
|
|
#define DEBUG_I2C_READ 0x04
|
|
#define DEBUG_REG_READ 0x08
|
|
#define DEBUG_REG_WRITE 0x10
|
|
#define DEBUG_FW_LOAD 0x20
|
|
|
|
static int debug = 0x00;
|
|
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug & DEBUG_OTHER) \
|
|
printk(KERN_DEBUG "si2165: " args); \
|
|
} while (0)
|
|
|
|
#define deb_i2c_write(args...) \
|
|
do { \
|
|
if (debug & DEBUG_I2C_WRITE) \
|
|
printk(KERN_DEBUG "si2165: i2c write: " args); \
|
|
} while (0)
|
|
|
|
#define deb_i2c_read(args...) \
|
|
do { \
|
|
if (debug & DEBUG_I2C_READ) \
|
|
printk(KERN_DEBUG "si2165: i2c read: " args); \
|
|
} while (0)
|
|
|
|
#define deb_readreg(args...) \
|
|
do { \
|
|
if (debug & DEBUG_REG_READ) \
|
|
printk(KERN_DEBUG "si2165: reg read: " args); \
|
|
} while (0)
|
|
|
|
#define deb_writereg(args...) \
|
|
do { \
|
|
if (debug & DEBUG_REG_WRITE) \
|
|
printk(KERN_DEBUG "si2165: reg write: " args); \
|
|
} while (0)
|
|
|
|
#define deb_fw_load(args...) \
|
|
do { \
|
|
if (debug & DEBUG_FW_LOAD) \
|
|
printk(KERN_DEBUG "si2165: fw load: " args); \
|
|
} while (0)
|
|
|
|
static int si2165_write(struct si2165_state *state, const u16 reg,
|
|
const u8 *src, const int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
u8 buf[2 + 4]; /* write a maximum of 4 bytes of data */
|
|
|
|
if (count + 2 > sizeof(buf)) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: i2c wr reg=%04x: count=%d is too big!\n",
|
|
KBUILD_MODNAME, reg, count);
|
|
return -EINVAL;
|
|
}
|
|
buf[0] = reg >> 8;
|
|
buf[1] = reg & 0xff;
|
|
memcpy(buf + 2, src, count);
|
|
|
|
msg.addr = state->config.i2c_addr;
|
|
msg.flags = 0;
|
|
msg.buf = buf;
|
|
msg.len = count + 2;
|
|
|
|
if (debug & DEBUG_I2C_WRITE)
|
|
deb_i2c_write("reg: 0x%04x, data: %*ph\n", reg, count, src);
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (ret != 1) {
|
|
dev_err(&state->i2c->dev, "%s: ret == %d\n", __func__, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_read(struct si2165_state *state,
|
|
const u16 reg, u8 *val, const int count)
|
|
{
|
|
int ret;
|
|
u8 reg_buf[] = { reg >> 8, reg & 0xff };
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = state->config.i2c_addr,
|
|
.flags = 0, .buf = reg_buf, .len = 2 },
|
|
{ .addr = state->config.i2c_addr,
|
|
.flags = I2C_M_RD, .buf = val, .len = count },
|
|
};
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (ret != 2) {
|
|
dev_err(&state->i2c->dev, "%s: error (addr %02x reg %04x error (ret == %i)\n",
|
|
__func__, state->config.i2c_addr, reg, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
if (debug & DEBUG_I2C_READ)
|
|
deb_i2c_read("reg: 0x%04x, data: %*ph\n", reg, count, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_readreg8(struct si2165_state *state,
|
|
const u16 reg, u8 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = si2165_read(state, reg, val, 1);
|
|
deb_readreg("R(0x%04x)=0x%02x\n", reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_readreg16(struct si2165_state *state,
|
|
const u16 reg, u16 *val)
|
|
{
|
|
u8 buf[2];
|
|
|
|
int ret = si2165_read(state, reg, buf, 2);
|
|
*val = buf[0] | buf[1] << 8;
|
|
deb_readreg("R(0x%04x)=0x%04x\n", reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_writereg8(struct si2165_state *state, const u16 reg, u8 val)
|
|
{
|
|
return si2165_write(state, reg, &val, 1);
|
|
}
|
|
|
|
static int si2165_writereg16(struct si2165_state *state, const u16 reg, u16 val)
|
|
{
|
|
u8 buf[2] = { val & 0xff, (val >> 8) & 0xff };
|
|
|
|
return si2165_write(state, reg, buf, 2);
|
|
}
|
|
|
|
static int si2165_writereg24(struct si2165_state *state, const u16 reg, u32 val)
|
|
{
|
|
u8 buf[3] = { val & 0xff, (val >> 8) & 0xff, (val >> 16) & 0xff };
|
|
|
|
return si2165_write(state, reg, buf, 3);
|
|
}
|
|
|
|
static int si2165_writereg32(struct si2165_state *state, const u16 reg, u32 val)
|
|
{
|
|
u8 buf[4] = {
|
|
val & 0xff,
|
|
(val >> 8) & 0xff,
|
|
(val >> 16) & 0xff,
|
|
(val >> 24) & 0xff
|
|
};
|
|
return si2165_write(state, reg, buf, 4);
|
|
}
|
|
|
|
static int si2165_writereg_mask8(struct si2165_state *state, const u16 reg,
|
|
u8 val, u8 mask)
|
|
{
|
|
if (mask != 0xff) {
|
|
u8 tmp;
|
|
int ret = si2165_readreg8(state, reg, &tmp);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
return si2165_writereg8(state, reg, val);
|
|
}
|
|
|
|
#define REG16(reg, val) { (reg), (val) & 0xff }, { (reg)+1, (val)>>8 & 0xff }
|
|
struct si2165_reg_value_pair {
|
|
u16 reg;
|
|
u8 val;
|
|
};
|
|
|
|
static int si2165_write_reg_list(struct si2165_state *state,
|
|
const struct si2165_reg_value_pair *regs,
|
|
int count)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
ret = si2165_writereg8(state, regs[i].reg, regs[i].val);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
s->min_delay_ms = 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_init_pll(struct si2165_state *state)
|
|
{
|
|
u32 ref_freq_Hz = state->config.ref_freq_Hz;
|
|
u8 divr = 1; /* 1..7 */
|
|
u8 divp = 1; /* only 1 or 4 */
|
|
u8 divn = 56; /* 1..63 */
|
|
u8 divm = 8;
|
|
u8 divl = 12;
|
|
u8 buf[4];
|
|
|
|
/*
|
|
* hardcoded values can be deleted if calculation is verified
|
|
* or it yields the same values as the windows driver
|
|
*/
|
|
switch (ref_freq_Hz) {
|
|
case 16000000u:
|
|
divn = 56;
|
|
break;
|
|
case 24000000u:
|
|
divr = 2;
|
|
divp = 4;
|
|
divn = 19;
|
|
break;
|
|
default:
|
|
/* ref_freq / divr must be between 4 and 16 MHz */
|
|
if (ref_freq_Hz > 16000000u)
|
|
divr = 2;
|
|
|
|
/*
|
|
* now select divn and divp such that
|
|
* fvco is in 1624..1824 MHz
|
|
*/
|
|
if (1624000000u * divr > ref_freq_Hz * 2u * 63u)
|
|
divp = 4;
|
|
|
|
/* is this already correct regarding rounding? */
|
|
divn = 1624000000u * divr / (ref_freq_Hz * 2u * divp);
|
|
break;
|
|
}
|
|
|
|
/* adc_clk and sys_clk depend on xtal and pll settings */
|
|
state->fvco_hz = ref_freq_Hz / divr
|
|
* 2u * divn * divp;
|
|
state->adc_clk = state->fvco_hz / (divm * 4u);
|
|
state->sys_clk = state->fvco_hz / (divl * 2u);
|
|
|
|
/* write pll registers 0x00a0..0x00a3 at once */
|
|
buf[0] = divl;
|
|
buf[1] = divm;
|
|
buf[2] = (divn & 0x3f) | ((divp == 1) ? 0x40 : 0x00) | 0x80;
|
|
buf[3] = divr;
|
|
return si2165_write(state, 0x00a0, buf, 4);
|
|
}
|
|
|
|
static int si2165_adjust_pll_divl(struct si2165_state *state, u8 divl)
|
|
{
|
|
state->sys_clk = state->fvco_hz / (divl * 2u);
|
|
return si2165_writereg8(state, 0x00a0, divl); /* pll_divl */
|
|
}
|
|
|
|
static u32 si2165_get_fe_clk(struct si2165_state *state)
|
|
{
|
|
/* assume Oversampling mode Ovr4 is used */
|
|
return state->adc_clk;
|
|
}
|
|
|
|
static int si2165_wait_init_done(struct si2165_state *state)
|
|
{
|
|
int ret = -EINVAL;
|
|
u8 val = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
si2165_readreg8(state, 0x0054, &val);
|
|
if (val == 0x01)
|
|
return 0;
|
|
usleep_range(1000, 50000);
|
|
}
|
|
dev_err(&state->i2c->dev, "%s: init_done was not set\n",
|
|
KBUILD_MODNAME);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_upload_firmware_block(struct si2165_state *state,
|
|
const u8 *data, u32 len, u32 *poffset, u32 block_count)
|
|
{
|
|
int ret;
|
|
u8 buf_ctrl[4] = { 0x00, 0x00, 0x00, 0xc0 };
|
|
u8 wordcount;
|
|
u32 cur_block = 0;
|
|
u32 offset = poffset ? *poffset : 0;
|
|
|
|
if (len < 4)
|
|
return -EINVAL;
|
|
if (len % 4 != 0)
|
|
return -EINVAL;
|
|
|
|
deb_fw_load(
|
|
"si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n",
|
|
len, offset, block_count);
|
|
while (offset+12 <= len && cur_block < block_count) {
|
|
deb_fw_load(
|
|
"si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
|
|
len, offset, cur_block, block_count);
|
|
wordcount = data[offset];
|
|
if (wordcount < 1 || data[offset+1] ||
|
|
data[offset+2] || data[offset+3]) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: bad fw data[0..3] = %*ph\n",
|
|
KBUILD_MODNAME, 4, data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (offset + 8 + wordcount * 4 > len) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: len is too small for block len=%d, wordcount=%d\n",
|
|
KBUILD_MODNAME, len, wordcount);
|
|
return -EINVAL;
|
|
}
|
|
|
|
buf_ctrl[0] = wordcount - 1;
|
|
|
|
ret = si2165_write(state, 0x0364, buf_ctrl, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_write(state, 0x0368, data+offset+4, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
offset += 8;
|
|
|
|
while (wordcount > 0) {
|
|
ret = si2165_write(state, 0x36c, data+offset, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
wordcount--;
|
|
offset += 4;
|
|
}
|
|
cur_block++;
|
|
}
|
|
|
|
deb_fw_load(
|
|
"si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
|
|
len, offset, cur_block, block_count);
|
|
|
|
if (poffset)
|
|
*poffset = offset;
|
|
|
|
deb_fw_load("si2165_upload_firmware_block returned offset=0x%x\n",
|
|
offset);
|
|
|
|
return 0;
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_upload_firmware(struct si2165_state *state)
|
|
{
|
|
/* int ret; */
|
|
u8 val[3];
|
|
u16 val16;
|
|
int ret;
|
|
|
|
const struct firmware *fw = NULL;
|
|
u8 *fw_file;
|
|
const u8 *data;
|
|
u32 len;
|
|
u32 offset;
|
|
u8 patch_version;
|
|
u8 block_count;
|
|
u16 crc_expected;
|
|
|
|
switch (state->chip_revcode) {
|
|
case 0x03: /* revision D */
|
|
fw_file = SI2165_FIRMWARE_REV_D;
|
|
break;
|
|
default:
|
|
dev_info(&state->i2c->dev, "%s: no firmware file for revision=%d\n",
|
|
KBUILD_MODNAME, state->chip_revcode);
|
|
return 0;
|
|
}
|
|
|
|
/* request the firmware, this will block and timeout */
|
|
ret = request_firmware(&fw, fw_file, state->i2c->dev.parent);
|
|
if (ret) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware file '%s' not found\n",
|
|
KBUILD_MODNAME, fw_file);
|
|
goto error;
|
|
}
|
|
|
|
data = fw->data;
|
|
len = fw->size;
|
|
|
|
dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s' size=%d\n",
|
|
KBUILD_MODNAME, fw_file, len);
|
|
|
|
if (len % 4 != 0) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware size is not multiple of 4\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* check header (8 bytes) */
|
|
if (len < 8) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware header is missing\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
if (data[0] != 1 || data[1] != 0) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware file version is wrong\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
patch_version = data[2];
|
|
block_count = data[4];
|
|
crc_expected = data[7] << 8 | data[6];
|
|
|
|
/* start uploading fw */
|
|
/* boot/wdog status */
|
|
ret = si2165_writereg8(state, 0x0341, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* reset */
|
|
ret = si2165_writereg8(state, 0x00c0, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable reset on error */
|
|
ret = si2165_readreg8(state, 0x035c, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_readreg8(state, 0x035c, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x035c, 0x02);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* start right after the header */
|
|
offset = 8;
|
|
|
|
dev_info(&state->i2c->dev, "%s: si2165_upload_firmware extracted patch_version=0x%02x, block_count=0x%02x, crc_expected=0x%04x\n",
|
|
KBUILD_MODNAME, patch_version, block_count, crc_expected);
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len, &offset, 1);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_writereg8(state, 0x0344, patch_version);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* reset crc */
|
|
ret = si2165_writereg8(state, 0x0379, 0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len,
|
|
&offset, block_count);
|
|
if (ret < 0) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmware could not be uploaded\n",
|
|
KBUILD_MODNAME);
|
|
goto error;
|
|
}
|
|
|
|
/* read crc */
|
|
ret = si2165_readreg16(state, 0x037a, &val16);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (val16 != crc_expected) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmware crc mismatch %04x != %04x\n",
|
|
KBUILD_MODNAME, val16, crc_expected);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len, &offset, 5);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (len != offset) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmware len mismatch %04x != %04x\n",
|
|
KBUILD_MODNAME, len, offset);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* reset watchdog error register */
|
|
ret = si2165_writereg_mask8(state, 0x0341, 0x02, 0x02);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable reset on error */
|
|
ret = si2165_writereg_mask8(state, 0x035c, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
dev_info(&state->i2c->dev, "%s: fw load finished\n", KBUILD_MODNAME);
|
|
|
|
ret = 0;
|
|
state->firmware_loaded = true;
|
|
error:
|
|
if (fw) {
|
|
release_firmware(fw);
|
|
fw = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_init(struct dvb_frontend *fe)
|
|
{
|
|
int ret = 0;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
u8 val;
|
|
u8 patch_version = 0x00;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
|
|
/* powerup */
|
|
ret = si2165_writereg8(state, 0x0000, state->config.chip_mode);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* dsp_clock_enable */
|
|
ret = si2165_writereg8(state, 0x0104, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_readreg8(state, 0x0000, &val); /* verify chip_mode */
|
|
if (ret < 0)
|
|
goto error;
|
|
if (val != state->config.chip_mode) {
|
|
dev_err(&state->i2c->dev, "%s: could not set chip_mode\n",
|
|
KBUILD_MODNAME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* agc */
|
|
ret = si2165_writereg8(state, 0x018b, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0190, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0170, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0171, 0x07);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* rssi pad */
|
|
ret = si2165_writereg8(state, 0x0646, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0641, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_init_pll(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable chip_init */
|
|
ret = si2165_writereg8(state, 0x0050, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* set start_init */
|
|
ret = si2165_writereg8(state, 0x0096, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_wait_init_done(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* disable chip_init */
|
|
ret = si2165_writereg8(state, 0x0050, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* ber_pkt */
|
|
ret = si2165_writereg16(state, 0x0470, 0x7530);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_readreg8(state, 0x0344, &patch_version);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_writereg8(state, 0x00cb, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* dsp_addr_jump */
|
|
ret = si2165_writereg32(state, 0x0348, 0xf4000000);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, &val);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
if (patch_version == 0x00) {
|
|
ret = si2165_upload_firmware(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* ts output config */
|
|
ret = si2165_writereg8(state, 0x04e4, 0x20);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg16(state, 0x04ef, 0x00fe);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg24(state, 0x04f4, 0x555555);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x04e5, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_sleep(struct dvb_frontend *fe)
|
|
{
|
|
int ret;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
/* dsp clock disable */
|
|
ret = si2165_writereg8(state, 0x0104, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* chip mode */
|
|
ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
int ret;
|
|
u8 fec_lock = 0;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
if (!state->has_dvbt)
|
|
return -EINVAL;
|
|
|
|
/* check fec_lock */
|
|
ret = si2165_readreg8(state, 0x4e0, &fec_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
*status = 0;
|
|
if (fec_lock & 0x01) {
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_set_oversamp(struct si2165_state *state, u32 dvb_rate)
|
|
{
|
|
u64 oversamp;
|
|
u32 reg_value;
|
|
|
|
oversamp = si2165_get_fe_clk(state);
|
|
oversamp <<= 23;
|
|
do_div(oversamp, dvb_rate);
|
|
reg_value = oversamp & 0x3fffffff;
|
|
|
|
dprintk("%s: Write oversamp=%#x\n", __func__, reg_value);
|
|
return si2165_writereg32(state, 0x00e4, reg_value);
|
|
}
|
|
|
|
static int si2165_set_if_freq_shift(struct si2165_state *state)
|
|
{
|
|
struct dvb_frontend *fe = &state->fe;
|
|
u64 if_freq_shift;
|
|
s32 reg_value = 0;
|
|
u32 fe_clk = si2165_get_fe_clk(state);
|
|
u32 IF = 0;
|
|
|
|
if (!fe->ops.tuner_ops.get_if_frequency) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n",
|
|
KBUILD_MODNAME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
|
|
if_freq_shift = IF;
|
|
if_freq_shift <<= 29;
|
|
|
|
do_div(if_freq_shift, fe_clk);
|
|
reg_value = (s32)if_freq_shift;
|
|
|
|
if (state->config.inversion)
|
|
reg_value = -reg_value;
|
|
|
|
reg_value = reg_value & 0x1fffffff;
|
|
|
|
/* if_freq_shift, usbdump contained 0x023ee08f; */
|
|
return si2165_writereg32(state, 0x00e8, reg_value);
|
|
}
|
|
|
|
static const struct si2165_reg_value_pair dvbt_regs[] = {
|
|
/* standard = DVB-T */
|
|
{ 0x00ec, 0x01 },
|
|
{ 0x08f8, 0x00 },
|
|
/* impulsive_noise_remover */
|
|
{ 0x031c, 0x01 },
|
|
{ 0x00cb, 0x00 },
|
|
/* agc2 */
|
|
{ 0x016e, 0x41 },
|
|
{ 0x016c, 0x0e },
|
|
{ 0x016d, 0x10 },
|
|
/* agc */
|
|
{ 0x015b, 0x03 },
|
|
{ 0x0150, 0x78 },
|
|
/* agc */
|
|
{ 0x01a0, 0x78 },
|
|
{ 0x01c8, 0x68 },
|
|
/* freq_sync_range */
|
|
REG16(0x030c, 0x0064),
|
|
/* gp_reg0 */
|
|
{ 0x0387, 0x00 }
|
|
};
|
|
|
|
static int si2165_set_frontend_dvbt(struct dvb_frontend *fe)
|
|
{
|
|
int ret;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
u32 dvb_rate = 0;
|
|
u16 bw10k;
|
|
u32 bw_hz = p->bandwidth_hz;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
|
|
if (!state->has_dvbt)
|
|
return -EINVAL;
|
|
|
|
/* no bandwidth auto-detection */
|
|
if (bw_hz == 0)
|
|
return -EINVAL;
|
|
|
|
dvb_rate = bw_hz * 8 / 7;
|
|
bw10k = bw_hz / 10000;
|
|
|
|
ret = si2165_adjust_pll_divl(state, 12);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* bandwidth in 10KHz steps */
|
|
ret = si2165_writereg16(state, 0x0308, bw10k);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_set_oversamp(state, dvb_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = si2165_write_reg_list(state, dvbt_regs, ARRAY_SIZE(dvbt_regs));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct si2165_reg_value_pair dvbc_regs[] = {
|
|
/* standard = DVB-C */
|
|
{ 0x00ec, 0x05 },
|
|
{ 0x08f8, 0x00 },
|
|
|
|
/* agc2 */
|
|
{ 0x016e, 0x50 },
|
|
{ 0x016c, 0x0e },
|
|
{ 0x016d, 0x10 },
|
|
/* agc */
|
|
{ 0x015b, 0x03 },
|
|
{ 0x0150, 0x68 },
|
|
/* agc */
|
|
{ 0x01a0, 0x68 },
|
|
{ 0x01c8, 0x50 },
|
|
|
|
{ 0x0278, 0x0d },
|
|
|
|
{ 0x023a, 0x05 },
|
|
{ 0x0261, 0x09 },
|
|
REG16(0x0350, 0x3e80),
|
|
{ 0x02f4, 0x00 },
|
|
|
|
{ 0x00cb, 0x01 },
|
|
REG16(0x024c, 0x0000),
|
|
REG16(0x027c, 0x0000),
|
|
{ 0x0232, 0x03 },
|
|
{ 0x02f4, 0x0b },
|
|
{ 0x018b, 0x00 },
|
|
};
|
|
|
|
static int si2165_set_frontend_dvbc(struct dvb_frontend *fe)
|
|
{
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
const u32 dvb_rate = p->symbol_rate;
|
|
const u32 bw_hz = p->bandwidth_hz;
|
|
|
|
if (!state->has_dvbc)
|
|
return -EINVAL;
|
|
|
|
if (dvb_rate == 0)
|
|
return -EINVAL;
|
|
|
|
ret = si2165_adjust_pll_divl(state, 14);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Oversampling */
|
|
ret = si2165_set_oversamp(state, dvb_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = si2165_writereg32(state, 0x00c4, bw_hz);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = si2165_write_reg_list(state, dvbc_regs, ARRAY_SIZE(dvbc_regs));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct si2165_reg_value_pair agc_rewrite[] = {
|
|
{ 0x012a, 0x46 },
|
|
{ 0x012c, 0x00 },
|
|
{ 0x012e, 0x0a },
|
|
{ 0x012f, 0xff },
|
|
{ 0x0123, 0x70 }
|
|
};
|
|
|
|
static int si2165_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
u32 delsys = p->delivery_system;
|
|
int ret;
|
|
u8 val[3];
|
|
|
|
/* initial setting of if freq shift */
|
|
ret = si2165_set_if_freq_shift(state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (delsys) {
|
|
case SYS_DVBT:
|
|
ret = si2165_set_frontend_dvbt(fe);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
ret = si2165_set_frontend_dvbc(fe);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* dsp_addr_jump */
|
|
ret = si2165_writereg32(state, 0x0348, 0xf4000000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
|
|
/* recalc if_freq_shift if IF might has changed */
|
|
ret = si2165_set_if_freq_shift(state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x0341, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* reset all */
|
|
ret = si2165_writereg8(state, 0x00c0, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* gp_reg0 */
|
|
ret = si2165_writereg32(state, 0x0384, 0x00000000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* write adc values after each reset*/
|
|
ret = si2165_write_reg_list(state, agc_rewrite,
|
|
ARRAY_SIZE(agc_rewrite));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* start_synchro */
|
|
ret = si2165_writereg8(state, 0x02e0, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void si2165_release(struct dvb_frontend *fe)
|
|
{
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops si2165_ops = {
|
|
.info = {
|
|
.name = "Silicon Labs ",
|
|
/* For DVB-C */
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 7200000,
|
|
/* For DVB-T */
|
|
.frequency_stepsize = 166667,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_32 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 |
|
|
FE_CAN_QAM_256 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_MUTE_TS |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_RECOVER
|
|
},
|
|
|
|
.get_tune_settings = si2165_get_tune_settings,
|
|
|
|
.init = si2165_init,
|
|
.sleep = si2165_sleep,
|
|
|
|
.set_frontend = si2165_set_frontend,
|
|
.read_status = si2165_read_status,
|
|
|
|
.release = si2165_release,
|
|
};
|
|
|
|
struct dvb_frontend *si2165_attach(const struct si2165_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct si2165_state *state = NULL;
|
|
int n;
|
|
int io_ret;
|
|
u8 val;
|
|
char rev_char;
|
|
const char *chip_name;
|
|
|
|
if (config == NULL || i2c == NULL)
|
|
goto error;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct si2165_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->i2c = i2c;
|
|
state->config = *config;
|
|
|
|
if (state->config.ref_freq_Hz < 4000000
|
|
|| state->config.ref_freq_Hz > 27000000) {
|
|
dev_err(&state->i2c->dev, "%s: ref_freq of %d Hz not supported by this driver\n",
|
|
KBUILD_MODNAME, state->config.ref_freq_Hz);
|
|
goto error;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->fe.ops, &si2165_ops,
|
|
sizeof(struct dvb_frontend_ops));
|
|
state->fe.demodulator_priv = state;
|
|
|
|
/* powerup */
|
|
io_ret = si2165_writereg8(state, 0x0000, state->config.chip_mode);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0000, &val);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
if (val != state->config.chip_mode)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0023, &state->chip_revcode);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0118, &state->chip_type);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
/* powerdown */
|
|
io_ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
if (state->chip_revcode < 26)
|
|
rev_char = 'A' + state->chip_revcode;
|
|
else
|
|
rev_char = '?';
|
|
|
|
switch (state->chip_type) {
|
|
case 0x06:
|
|
chip_name = "Si2161";
|
|
state->has_dvbt = true;
|
|
break;
|
|
case 0x07:
|
|
chip_name = "Si2165";
|
|
state->has_dvbt = true;
|
|
state->has_dvbc = true;
|
|
break;
|
|
default:
|
|
dev_err(&state->i2c->dev, "%s: Unsupported Silicon Labs chip (type %d, rev %d)\n",
|
|
KBUILD_MODNAME, state->chip_type, state->chip_revcode);
|
|
goto error;
|
|
}
|
|
|
|
dev_info(&state->i2c->dev,
|
|
"%s: Detected Silicon Labs %s-%c (type %d, rev %d)\n",
|
|
KBUILD_MODNAME, chip_name, rev_char, state->chip_type,
|
|
state->chip_revcode);
|
|
|
|
strlcat(state->fe.ops.info.name, chip_name,
|
|
sizeof(state->fe.ops.info.name));
|
|
|
|
n = 0;
|
|
if (state->has_dvbt) {
|
|
state->fe.ops.delsys[n++] = SYS_DVBT;
|
|
strlcat(state->fe.ops.info.name, " DVB-T",
|
|
sizeof(state->fe.ops.info.name));
|
|
}
|
|
if (state->has_dvbc) {
|
|
state->fe.ops.delsys[n++] = SYS_DVBC_ANNEX_A;
|
|
strlcat(state->fe.ops.info.name, " DVB-C",
|
|
sizeof(state->fe.ops.info.name));
|
|
}
|
|
|
|
return &state->fe;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(si2165_attach);
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Silicon Labs Si2165 DVB-C/-T Demodulator driver");
|
|
MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(SI2165_FIRMWARE_REV_D);
|