mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
7233593b78
This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
317 lines
7.1 KiB
Plaintext
317 lines
7.1 KiB
Plaintext
choice
|
|
prompt "Machine Type"
|
|
depends on EMBEDDED6xx
|
|
|
|
config KATANA
|
|
bool "Artesyn-Katana"
|
|
help
|
|
Select KATANA if configuring an Artesyn KATANA 750i or 3750
|
|
cPCI board.
|
|
|
|
config WILLOW
|
|
bool "Cogent-Willow"
|
|
|
|
config CPCI690
|
|
bool "Force-CPCI690"
|
|
help
|
|
Select CPCI690 if configuring a Force CPCI690 cPCI board.
|
|
|
|
config POWERPMC250
|
|
bool "Force-PowerPMC250"
|
|
|
|
config CHESTNUT
|
|
bool "IBM 750FX Eval board or 750GX Eval board"
|
|
help
|
|
Select CHESTNUT if configuring an IBM 750FX Eval Board or a
|
|
IBM 750GX Eval board.
|
|
|
|
config SPRUCE
|
|
bool "IBM-Spruce"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config HDPU
|
|
bool "Sky-HDPU"
|
|
help
|
|
Select HDPU if configuring a Sky Computers Compute Blade.
|
|
|
|
config HDPU_FEATURES
|
|
depends HDPU
|
|
tristate "HDPU-Features"
|
|
help
|
|
Select to enable HDPU enhanced features.
|
|
|
|
config EV64260
|
|
bool "Marvell-EV64260BP"
|
|
help
|
|
Select EV64260 if configuring a Marvell (formerly Galileo)
|
|
EV64260BP Evaluation platform.
|
|
|
|
config LOPEC
|
|
bool "Motorola-LoPEC"
|
|
select PPC_I8259
|
|
|
|
config MVME5100
|
|
bool "Motorola-MVME5100"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PPLUS
|
|
bool "Motorola-PowerPlus"
|
|
select PPC_I8259
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC750
|
|
bool "Motorola-PrPMC750"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC800
|
|
bool "Motorola-PrPMC800"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config SANDPOINT
|
|
bool "Motorola-Sandpoint"
|
|
select PPC_I8259
|
|
help
|
|
Select SANDPOINT if configuring for a Motorola Sandpoint X3
|
|
(any flavor).
|
|
|
|
config MPC7448HPC2
|
|
bool "Freescale MPC7448HPC2(Taiga)"
|
|
select TSI108_BRIDGE
|
|
select DEFAULT_UIMAGE
|
|
select PPC_UDBG_16550
|
|
select MPIC
|
|
select MPIC_WEIRD
|
|
help
|
|
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
|
|
platform
|
|
|
|
config RADSTONE_PPC7D
|
|
bool "Radstone Technology PPC7D board"
|
|
select PPC_I8259
|
|
|
|
config PAL4
|
|
bool "SBS-Palomar4"
|
|
|
|
config GEMINI
|
|
bool "Synergy-Gemini"
|
|
select PPC_INDIRECT_PCI
|
|
depends on BROKEN
|
|
help
|
|
Select Gemini if configuring for a Synergy Microsystems' Gemini
|
|
series Single Board Computer. More information is available at:
|
|
<http://www.synergymicro.com/PressRel/97_10_15.html>.
|
|
|
|
config EST8260
|
|
bool "EST8260"
|
|
---help---
|
|
The EST8260 is a single-board computer manufactured by Wind River
|
|
Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
|
|
the MPC8260. Wind River Systems has a website at
|
|
<http://www.windriver.com/>, but the EST8260 cannot be found on it
|
|
and has probably been discontinued or rebadged.
|
|
|
|
config SBC82xx
|
|
bool "SBC82xx"
|
|
---help---
|
|
SBC PowerQUICC II, single-board computer with MPC82xx CPU
|
|
Manufacturer: Wind River Systems, Inc.
|
|
Date of Release: May 2003
|
|
End of Life: -
|
|
URL: <http://www.windriver.com/>
|
|
|
|
config SBS8260
|
|
bool "SBS8260"
|
|
|
|
config RPX8260
|
|
bool "RPXSUPER"
|
|
|
|
config TQM8260
|
|
bool "TQM8260"
|
|
---help---
|
|
MPC8260 based module, little larger than credit card,
|
|
up to 128 MB global + 64 MB local RAM, 32 MB Flash,
|
|
32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
|
|
2 x serial ports, ...
|
|
Manufacturer: TQ Components, www.tq-group.de
|
|
Date of Release: June 2001
|
|
End of Life: not yet :-)
|
|
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
|
|
|
|
config ADS8272
|
|
bool "ADS8272"
|
|
|
|
config PQ2FADS
|
|
bool "Freescale-PQ2FADS"
|
|
help
|
|
Select PQ2FADS if you wish to configure for a Freescale
|
|
PQ2FADS board (-VR or -ZU).
|
|
|
|
config LITE5200
|
|
bool "Freescale LITE5200 / (IceCube)"
|
|
select PPC_MPC52xx
|
|
help
|
|
Support for the LITE5200 dev board for the MPC5200 from Freescale.
|
|
This is for the LITE5200 version 2.0 board. Don't know if it changes
|
|
much but it's only been tested on this board version. I think this
|
|
board is also known as IceCube.
|
|
|
|
config EV64360
|
|
bool "Marvell-EV64360BP"
|
|
help
|
|
Select EV64360 if configuring a Marvell EV64360BP Evaluation
|
|
platform.
|
|
endchoice
|
|
|
|
config PQ2ADS
|
|
bool
|
|
depends on ADS8272
|
|
default y
|
|
|
|
config TQM8xxL
|
|
bool
|
|
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
|
|
default y
|
|
|
|
config PPC_MPC52xx
|
|
bool
|
|
|
|
config 8260
|
|
bool "CPM2 Support" if WILLOW
|
|
depends on 6xx
|
|
default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
|
|
help
|
|
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
|
|
this option means that you wish to build a kernel for a machine with
|
|
an 8260 class CPU.
|
|
|
|
config 8272
|
|
bool
|
|
depends on 6xx
|
|
default y if ADS8272
|
|
select 8260
|
|
help
|
|
The MPC8272 CPM has a different internal dpram setup than other CPM2
|
|
devices
|
|
|
|
config CPM2
|
|
bool
|
|
depends on 8260 || MPC8560 || MPC8555
|
|
default y
|
|
help
|
|
The CPM2 (Communications Processor Module) is a coprocessor on
|
|
embedded CPUs made by Motorola. Selecting this option means that
|
|
you wish to build a kernel for a machine with a CPM2 coprocessor
|
|
on it (826x, 827x, 8560).
|
|
|
|
config PPC_GEN550
|
|
bool
|
|
depends on SANDPOINT || SPRUCE || PPLUS || \
|
|
PRPMC750 || PRPMC800 || LOPEC || \
|
|
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
|
|
83xx
|
|
default y
|
|
|
|
config FORCE
|
|
bool
|
|
depends on 6xx && POWERPMC250
|
|
default y
|
|
|
|
config GT64260
|
|
bool
|
|
depends on EV64260 || CPCI690
|
|
default y
|
|
|
|
config MV64360 # Really MV64360 & MV64460
|
|
bool
|
|
depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
|
|
default y
|
|
|
|
config MV64X60
|
|
bool
|
|
depends on (GT64260 || MV64360)
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config TSI108_BRIDGE
|
|
bool
|
|
depends on MPC7448HPC2
|
|
default y
|
|
|
|
menu "Set bridge options"
|
|
depends on MV64X60
|
|
|
|
config NOT_COHERENT_CACHE
|
|
bool "Turn off Cache Coherency"
|
|
default n
|
|
help
|
|
Some 64x60 bridges lock up when trying to enforce cache coherency.
|
|
When this option is selected, cache coherency will be turned off.
|
|
Note that this can cause other problems (e.g., stale data being
|
|
speculatively loaded via a cached mapping). Use at your own risk.
|
|
|
|
config MV64X60_BASE
|
|
hex "Set bridge base used by firmware"
|
|
default "0xf1000000"
|
|
help
|
|
A firmware can leave the base address of the bridge's registers at
|
|
a non-standard location. If so, set this value to reflect the
|
|
address of that non-standard location.
|
|
|
|
config MV64X60_NEW_BASE
|
|
hex "Set bridge base used by kernel"
|
|
default "0xf1000000"
|
|
help
|
|
If the current base address of the bridge's registers is not where
|
|
you want it, set this value to the address that you want it moved to.
|
|
|
|
endmenu
|
|
|
|
config NONMONARCH_SUPPORT
|
|
bool "Enable Non-Monarch Support"
|
|
depends on PRPMC800
|
|
|
|
config HARRIER
|
|
bool
|
|
depends on PRPMC800
|
|
default y
|
|
|
|
config EPIC_SERIAL_MODE
|
|
bool
|
|
depends on 6xx && (LOPEC || SANDPOINT)
|
|
default y
|
|
|
|
config MPC10X_BRIDGE
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config MPC10X_OPENPIC
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
default y
|
|
|
|
config MPC10X_STORE_GATHERING
|
|
bool "Enable MPC10x store gathering"
|
|
depends on MPC10X_BRIDGE
|
|
|
|
config SANDPOINT_ENABLE_UART1
|
|
bool "Enable DUART mode on Sandpoint"
|
|
depends on SANDPOINT
|
|
help
|
|
If this option is enabled then the MPC824x processor will run
|
|
in DUART mode instead of UART mode.
|
|
|
|
config HARRIER_STORE_GATHERING
|
|
bool "Enable Harrier store gathering"
|
|
depends on HARRIER
|
|
|
|
config MVME5100_IPMC761_PRESENT
|
|
bool "MVME5100 configured with an IPMC761"
|
|
depends on MVME5100
|
|
select PPC_I8259
|
|
|
|
config SPRUCE_BAUD_33M
|
|
bool "Spruce baud clock support"
|
|
depends on SPRUCE
|