mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 09:04:26 +07:00
fc18eaa073
Fix the VF reset flow so that it works on real hardware. After discussions with the HW team, the reset flow has been changed somewhat. - Change the i40e_reset_vf function to a void type, and fix up the callers to reflect this. - Move the MSI-X disable code to i40e_free_vf_res since it must be done every time the VF is freed, regardless of whether or not it is reset. - Ensure that the PCIe bus is quiet before polling the reset bit. - Don't clear the VFGEN_RSTAT1 register at the beginning as it is cleared by the reset. - Poll longer for the reset to be done. - Disable the queues using an existing function rather than rolling our own. - Free and reallocate the VSI after reset to avoid rx hang. Change-Id: I11e2590431cb73e8663714d1cc5b23d59b809033 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
8151 lines
218 KiB
C
8151 lines
218 KiB
C
/*******************************************************************************
|
|
*
|
|
* Intel Ethernet Controller XL710 Family Linux Driver
|
|
* Copyright(c) 2013 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in
|
|
* the file called "COPYING".
|
|
*
|
|
* Contact Information:
|
|
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* Local includes */
|
|
#include "i40e.h"
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
#include <net/vxlan.h>
|
|
#endif
|
|
|
|
const char i40e_driver_name[] = "i40e";
|
|
static const char i40e_driver_string[] =
|
|
"Intel(R) Ethernet Connection XL710 Network Driver";
|
|
|
|
#define DRV_KERN "-k"
|
|
|
|
#define DRV_VERSION_MAJOR 0
|
|
#define DRV_VERSION_MINOR 3
|
|
#define DRV_VERSION_BUILD 14
|
|
#define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
|
|
__stringify(DRV_VERSION_MINOR) "." \
|
|
__stringify(DRV_VERSION_BUILD) DRV_KERN
|
|
const char i40e_driver_version_str[] = DRV_VERSION;
|
|
static const char i40e_copyright[] = "Copyright (c) 2013 Intel Corporation.";
|
|
|
|
/* a bit of forward declarations */
|
|
static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi);
|
|
static void i40e_handle_reset_warning(struct i40e_pf *pf);
|
|
static int i40e_add_vsi(struct i40e_vsi *vsi);
|
|
static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi);
|
|
static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit);
|
|
static int i40e_setup_misc_vector(struct i40e_pf *pf);
|
|
static void i40e_determine_queue_usage(struct i40e_pf *pf);
|
|
static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
|
|
|
|
/* i40e_pci_tbl - PCI Device ID Table
|
|
*
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
|
|
* Class, Class Mask, private data (not used) }
|
|
*/
|
|
static DEFINE_PCI_DEVICE_TABLE(i40e_pci_tbl) = {
|
|
{PCI_VDEVICE(INTEL, I40E_SFP_XL710_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_SFP_X710_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_QEMU_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_KX_A_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_KX_B_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_KX_C_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_KX_D_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_QSFP_A_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_QSFP_B_DEVICE_ID), 0},
|
|
{PCI_VDEVICE(INTEL, I40E_QSFP_C_DEVICE_ID), 0},
|
|
/* required last entry */
|
|
{0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, i40e_pci_tbl);
|
|
|
|
#define I40E_MAX_VF_COUNT 128
|
|
static int debug = -1;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
|
|
|
|
MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
|
|
MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
/**
|
|
* i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
|
|
* @hw: pointer to the HW structure
|
|
* @mem: ptr to mem struct to fill out
|
|
* @size: size of memory requested
|
|
* @alignment: what to align the allocation to
|
|
**/
|
|
int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem,
|
|
u64 size, u32 alignment)
|
|
{
|
|
struct i40e_pf *pf = (struct i40e_pf *)hw->back;
|
|
|
|
mem->size = ALIGN(size, alignment);
|
|
mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size,
|
|
&mem->pa, GFP_KERNEL);
|
|
if (!mem->va)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_free_dma_mem_d - OS specific memory free for shared code
|
|
* @hw: pointer to the HW structure
|
|
* @mem: ptr to mem struct to free
|
|
**/
|
|
int i40e_free_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem)
|
|
{
|
|
struct i40e_pf *pf = (struct i40e_pf *)hw->back;
|
|
|
|
dma_free_coherent(&pf->pdev->dev, mem->size, mem->va, mem->pa);
|
|
mem->va = NULL;
|
|
mem->pa = 0;
|
|
mem->size = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_allocate_virt_mem_d - OS specific memory alloc for shared code
|
|
* @hw: pointer to the HW structure
|
|
* @mem: ptr to mem struct to fill out
|
|
* @size: size of memory requested
|
|
**/
|
|
int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem,
|
|
u32 size)
|
|
{
|
|
mem->size = size;
|
|
mem->va = kzalloc(size, GFP_KERNEL);
|
|
|
|
if (!mem->va)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_free_virt_mem_d - OS specific memory free for shared code
|
|
* @hw: pointer to the HW structure
|
|
* @mem: ptr to mem struct to free
|
|
**/
|
|
int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem)
|
|
{
|
|
/* it's ok to kfree a NULL pointer */
|
|
kfree(mem->va);
|
|
mem->va = NULL;
|
|
mem->size = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_get_lump - find a lump of free generic resource
|
|
* @pf: board private structure
|
|
* @pile: the pile of resource to search
|
|
* @needed: the number of items needed
|
|
* @id: an owner id to stick on the items assigned
|
|
*
|
|
* Returns the base item index of the lump, or negative for error
|
|
*
|
|
* The search_hint trick and lack of advanced fit-finding only work
|
|
* because we're highly likely to have all the same size lump requests.
|
|
* Linear search time and any fragmentation should be minimal.
|
|
**/
|
|
static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
|
|
u16 needed, u16 id)
|
|
{
|
|
int ret = -ENOMEM;
|
|
int i, j;
|
|
|
|
if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) {
|
|
dev_info(&pf->pdev->dev,
|
|
"param err: pile=%p needed=%d id=0x%04x\n",
|
|
pile, needed, id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* start the linear search with an imperfect hint */
|
|
i = pile->search_hint;
|
|
while (i < pile->num_entries) {
|
|
/* skip already allocated entries */
|
|
if (pile->list[i] & I40E_PILE_VALID_BIT) {
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
/* do we have enough in this lump? */
|
|
for (j = 0; (j < needed) && ((i+j) < pile->num_entries); j++) {
|
|
if (pile->list[i+j] & I40E_PILE_VALID_BIT)
|
|
break;
|
|
}
|
|
|
|
if (j == needed) {
|
|
/* there was enough, so assign it to the requestor */
|
|
for (j = 0; j < needed; j++)
|
|
pile->list[i+j] = id | I40E_PILE_VALID_BIT;
|
|
ret = i;
|
|
pile->search_hint = i + j;
|
|
break;
|
|
} else {
|
|
/* not enough, so skip over it and continue looking */
|
|
i += j;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_put_lump - return a lump of generic resource
|
|
* @pile: the pile of resource to search
|
|
* @index: the base item index
|
|
* @id: the owner id of the items assigned
|
|
*
|
|
* Returns the count of items in the lump
|
|
**/
|
|
static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
|
|
{
|
|
int valid_id = (id | I40E_PILE_VALID_BIT);
|
|
int count = 0;
|
|
int i;
|
|
|
|
if (!pile || index >= pile->num_entries)
|
|
return -EINVAL;
|
|
|
|
for (i = index;
|
|
i < pile->num_entries && pile->list[i] == valid_id;
|
|
i++) {
|
|
pile->list[i] = 0;
|
|
count++;
|
|
}
|
|
|
|
if (count && index < pile->search_hint)
|
|
pile->search_hint = index;
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* i40e_service_event_schedule - Schedule the service task to wake up
|
|
* @pf: board private structure
|
|
*
|
|
* If not already scheduled, this puts the task into the work queue
|
|
**/
|
|
static void i40e_service_event_schedule(struct i40e_pf *pf)
|
|
{
|
|
if (!test_bit(__I40E_DOWN, &pf->state) &&
|
|
!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) &&
|
|
!test_and_set_bit(__I40E_SERVICE_SCHED, &pf->state))
|
|
schedule_work(&pf->service_task);
|
|
}
|
|
|
|
/**
|
|
* i40e_tx_timeout - Respond to a Tx Hang
|
|
* @netdev: network interface device structure
|
|
*
|
|
* If any port has noticed a Tx timeout, it is likely that the whole
|
|
* device is munged, not just the one netdev port, so go for the full
|
|
* reset.
|
|
**/
|
|
static void i40e_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
|
|
pf->tx_timeout_count++;
|
|
|
|
if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ*20)))
|
|
pf->tx_timeout_recovery_level = 0;
|
|
pf->tx_timeout_last_recovery = jiffies;
|
|
netdev_info(netdev, "tx_timeout recovery level %d\n",
|
|
pf->tx_timeout_recovery_level);
|
|
|
|
switch (pf->tx_timeout_recovery_level) {
|
|
case 0:
|
|
/* disable and re-enable queues for the VSI */
|
|
if (in_interrupt()) {
|
|
set_bit(__I40E_REINIT_REQUESTED, &pf->state);
|
|
set_bit(__I40E_REINIT_REQUESTED, &vsi->state);
|
|
} else {
|
|
i40e_vsi_reinit_locked(vsi);
|
|
}
|
|
break;
|
|
case 1:
|
|
set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
|
|
break;
|
|
case 2:
|
|
set_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
|
|
break;
|
|
case 3:
|
|
set_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
|
|
break;
|
|
default:
|
|
netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
|
|
i40e_down(vsi);
|
|
break;
|
|
}
|
|
i40e_service_event_schedule(pf);
|
|
pf->tx_timeout_recovery_level++;
|
|
}
|
|
|
|
/**
|
|
* i40e_release_rx_desc - Store the new tail and head values
|
|
* @rx_ring: ring to bump
|
|
* @val: new head index
|
|
**/
|
|
static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
|
|
{
|
|
rx_ring->next_to_use = val;
|
|
|
|
/* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
writel(val, rx_ring->tail);
|
|
}
|
|
|
|
/**
|
|
* i40e_get_vsi_stats_struct - Get System Network Statistics
|
|
* @vsi: the VSI we care about
|
|
*
|
|
* Returns the address of the device statistics structure.
|
|
* The statistics are actually updated from the service task.
|
|
**/
|
|
struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi)
|
|
{
|
|
return &vsi->net_stats;
|
|
}
|
|
|
|
/**
|
|
* i40e_get_netdev_stats_struct - Get statistics for netdev interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns the address of the device statistics structure.
|
|
* The statistics are actually updated from the service task.
|
|
**/
|
|
static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
|
|
struct net_device *netdev,
|
|
struct rtnl_link_stats64 *stats)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi);
|
|
int i;
|
|
|
|
|
|
if (test_bit(__I40E_DOWN, &vsi->state))
|
|
return stats;
|
|
|
|
if (!vsi->tx_rings)
|
|
return stats;
|
|
|
|
rcu_read_lock();
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
struct i40e_ring *tx_ring, *rx_ring;
|
|
u64 bytes, packets;
|
|
unsigned int start;
|
|
|
|
tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
|
|
if (!tx_ring)
|
|
continue;
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&tx_ring->syncp);
|
|
packets = tx_ring->stats.packets;
|
|
bytes = tx_ring->stats.bytes;
|
|
} while (u64_stats_fetch_retry_bh(&tx_ring->syncp, start));
|
|
|
|
stats->tx_packets += packets;
|
|
stats->tx_bytes += bytes;
|
|
rx_ring = &tx_ring[1];
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&rx_ring->syncp);
|
|
packets = rx_ring->stats.packets;
|
|
bytes = rx_ring->stats.bytes;
|
|
} while (u64_stats_fetch_retry_bh(&rx_ring->syncp, start));
|
|
|
|
stats->rx_packets += packets;
|
|
stats->rx_bytes += bytes;
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
/* following stats updated by ixgbe_watchdog_task() */
|
|
stats->multicast = vsi_stats->multicast;
|
|
stats->tx_errors = vsi_stats->tx_errors;
|
|
stats->tx_dropped = vsi_stats->tx_dropped;
|
|
stats->rx_errors = vsi_stats->rx_errors;
|
|
stats->rx_crc_errors = vsi_stats->rx_crc_errors;
|
|
stats->rx_length_errors = vsi_stats->rx_length_errors;
|
|
|
|
return stats;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_reset_stats - Resets all stats of the given vsi
|
|
* @vsi: the VSI to have its stats reset
|
|
**/
|
|
void i40e_vsi_reset_stats(struct i40e_vsi *vsi)
|
|
{
|
|
struct rtnl_link_stats64 *ns;
|
|
int i;
|
|
|
|
if (!vsi)
|
|
return;
|
|
|
|
ns = i40e_get_vsi_stats_struct(vsi);
|
|
memset(ns, 0, sizeof(*ns));
|
|
memset(&vsi->net_stats_offsets, 0, sizeof(vsi->net_stats_offsets));
|
|
memset(&vsi->eth_stats, 0, sizeof(vsi->eth_stats));
|
|
memset(&vsi->eth_stats_offsets, 0, sizeof(vsi->eth_stats_offsets));
|
|
if (vsi->rx_rings)
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
memset(&vsi->rx_rings[i]->stats, 0 ,
|
|
sizeof(vsi->rx_rings[i]->stats));
|
|
memset(&vsi->rx_rings[i]->rx_stats, 0 ,
|
|
sizeof(vsi->rx_rings[i]->rx_stats));
|
|
memset(&vsi->tx_rings[i]->stats, 0 ,
|
|
sizeof(vsi->tx_rings[i]->stats));
|
|
memset(&vsi->tx_rings[i]->tx_stats, 0,
|
|
sizeof(vsi->tx_rings[i]->tx_stats));
|
|
}
|
|
vsi->stat_offsets_loaded = false;
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_reset_stats - Reset all of the stats for the given pf
|
|
* @pf: the PF to be reset
|
|
**/
|
|
void i40e_pf_reset_stats(struct i40e_pf *pf)
|
|
{
|
|
memset(&pf->stats, 0, sizeof(pf->stats));
|
|
memset(&pf->stats_offsets, 0, sizeof(pf->stats_offsets));
|
|
pf->stat_offsets_loaded = false;
|
|
}
|
|
|
|
/**
|
|
* i40e_stat_update48 - read and update a 48 bit stat from the chip
|
|
* @hw: ptr to the hardware info
|
|
* @hireg: the high 32 bit reg to read
|
|
* @loreg: the low 32 bit reg to read
|
|
* @offset_loaded: has the initial offset been loaded yet
|
|
* @offset: ptr to current offset value
|
|
* @stat: ptr to the stat
|
|
*
|
|
* Since the device stats are not reset at PFReset, they likely will not
|
|
* be zeroed when the driver starts. We'll save the first values read
|
|
* and use them as offsets to be subtracted from the raw values in order
|
|
* to report stats that count from zero. In the process, we also manage
|
|
* the potential roll-over.
|
|
**/
|
|
static void i40e_stat_update48(struct i40e_hw *hw, u32 hireg, u32 loreg,
|
|
bool offset_loaded, u64 *offset, u64 *stat)
|
|
{
|
|
u64 new_data;
|
|
|
|
if (hw->device_id == I40E_QEMU_DEVICE_ID) {
|
|
new_data = rd32(hw, loreg);
|
|
new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
|
|
} else {
|
|
new_data = rd64(hw, loreg);
|
|
}
|
|
if (!offset_loaded)
|
|
*offset = new_data;
|
|
if (likely(new_data >= *offset))
|
|
*stat = new_data - *offset;
|
|
else
|
|
*stat = (new_data + ((u64)1 << 48)) - *offset;
|
|
*stat &= 0xFFFFFFFFFFFFULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_stat_update32 - read and update a 32 bit stat from the chip
|
|
* @hw: ptr to the hardware info
|
|
* @reg: the hw reg to read
|
|
* @offset_loaded: has the initial offset been loaded yet
|
|
* @offset: ptr to current offset value
|
|
* @stat: ptr to the stat
|
|
**/
|
|
static void i40e_stat_update32(struct i40e_hw *hw, u32 reg,
|
|
bool offset_loaded, u64 *offset, u64 *stat)
|
|
{
|
|
u32 new_data;
|
|
|
|
new_data = rd32(hw, reg);
|
|
if (!offset_loaded)
|
|
*offset = new_data;
|
|
if (likely(new_data >= *offset))
|
|
*stat = (u32)(new_data - *offset);
|
|
else
|
|
*stat = (u32)((new_data + ((u64)1 << 32)) - *offset);
|
|
}
|
|
|
|
/**
|
|
* i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
|
|
* @vsi: the VSI to be updated
|
|
**/
|
|
void i40e_update_eth_stats(struct i40e_vsi *vsi)
|
|
{
|
|
int stat_idx = le16_to_cpu(vsi->info.stat_counter_idx);
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_eth_stats *oes;
|
|
struct i40e_eth_stats *es; /* device's eth stats */
|
|
|
|
es = &vsi->eth_stats;
|
|
oes = &vsi->eth_stats_offsets;
|
|
|
|
/* Gather up the stats that the hw collects */
|
|
i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->tx_errors, &es->tx_errors);
|
|
i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->rx_discards, &es->rx_discards);
|
|
|
|
i40e_stat_update48(hw, I40E_GLV_GORCH(stat_idx),
|
|
I40E_GLV_GORCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->rx_bytes, &es->rx_bytes);
|
|
i40e_stat_update48(hw, I40E_GLV_UPRCH(stat_idx),
|
|
I40E_GLV_UPRCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->rx_unicast, &es->rx_unicast);
|
|
i40e_stat_update48(hw, I40E_GLV_MPRCH(stat_idx),
|
|
I40E_GLV_MPRCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->rx_multicast, &es->rx_multicast);
|
|
i40e_stat_update48(hw, I40E_GLV_BPRCH(stat_idx),
|
|
I40E_GLV_BPRCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->rx_broadcast, &es->rx_broadcast);
|
|
|
|
i40e_stat_update48(hw, I40E_GLV_GOTCH(stat_idx),
|
|
I40E_GLV_GOTCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->tx_bytes, &es->tx_bytes);
|
|
i40e_stat_update48(hw, I40E_GLV_UPTCH(stat_idx),
|
|
I40E_GLV_UPTCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->tx_unicast, &es->tx_unicast);
|
|
i40e_stat_update48(hw, I40E_GLV_MPTCH(stat_idx),
|
|
I40E_GLV_MPTCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->tx_multicast, &es->tx_multicast);
|
|
i40e_stat_update48(hw, I40E_GLV_BPTCH(stat_idx),
|
|
I40E_GLV_BPTCL(stat_idx),
|
|
vsi->stat_offsets_loaded,
|
|
&oes->tx_broadcast, &es->tx_broadcast);
|
|
vsi->stat_offsets_loaded = true;
|
|
}
|
|
|
|
/**
|
|
* i40e_update_veb_stats - Update Switch component statistics
|
|
* @veb: the VEB being updated
|
|
**/
|
|
static void i40e_update_veb_stats(struct i40e_veb *veb)
|
|
{
|
|
struct i40e_pf *pf = veb->pf;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_eth_stats *oes;
|
|
struct i40e_eth_stats *es; /* device's eth stats */
|
|
int idx = 0;
|
|
|
|
idx = veb->stats_idx;
|
|
es = &veb->stats;
|
|
oes = &veb->stats_offsets;
|
|
|
|
/* Gather up the stats that the hw collects */
|
|
i40e_stat_update32(hw, I40E_GLSW_TDPC(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->tx_discards, &es->tx_discards);
|
|
if (hw->revision_id > 0)
|
|
i40e_stat_update32(hw, I40E_GLSW_RUPP(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->rx_unknown_protocol,
|
|
&es->rx_unknown_protocol);
|
|
i40e_stat_update48(hw, I40E_GLSW_GORCH(idx), I40E_GLSW_GORCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->rx_bytes, &es->rx_bytes);
|
|
i40e_stat_update48(hw, I40E_GLSW_UPRCH(idx), I40E_GLSW_UPRCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->rx_unicast, &es->rx_unicast);
|
|
i40e_stat_update48(hw, I40E_GLSW_MPRCH(idx), I40E_GLSW_MPRCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->rx_multicast, &es->rx_multicast);
|
|
i40e_stat_update48(hw, I40E_GLSW_BPRCH(idx), I40E_GLSW_BPRCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->rx_broadcast, &es->rx_broadcast);
|
|
|
|
i40e_stat_update48(hw, I40E_GLSW_GOTCH(idx), I40E_GLSW_GOTCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->tx_bytes, &es->tx_bytes);
|
|
i40e_stat_update48(hw, I40E_GLSW_UPTCH(idx), I40E_GLSW_UPTCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->tx_unicast, &es->tx_unicast);
|
|
i40e_stat_update48(hw, I40E_GLSW_MPTCH(idx), I40E_GLSW_MPTCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->tx_multicast, &es->tx_multicast);
|
|
i40e_stat_update48(hw, I40E_GLSW_BPTCH(idx), I40E_GLSW_BPTCL(idx),
|
|
veb->stat_offsets_loaded,
|
|
&oes->tx_broadcast, &es->tx_broadcast);
|
|
veb->stat_offsets_loaded = true;
|
|
}
|
|
|
|
/**
|
|
* i40e_update_link_xoff_rx - Update XOFF received in link flow control mode
|
|
* @pf: the corresponding PF
|
|
*
|
|
* Update the Rx XOFF counter (PAUSE frames) in link flow control mode
|
|
**/
|
|
static void i40e_update_link_xoff_rx(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw_port_stats *osd = &pf->stats_offsets;
|
|
struct i40e_hw_port_stats *nsd = &pf->stats;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u64 xoff = 0;
|
|
u16 i, v;
|
|
|
|
if ((hw->fc.current_mode != I40E_FC_FULL) &&
|
|
(hw->fc.current_mode != I40E_FC_RX_PAUSE))
|
|
return;
|
|
|
|
xoff = nsd->link_xoff_rx;
|
|
i40e_stat_update32(hw, I40E_GLPRT_LXOFFRXC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->link_xoff_rx, &nsd->link_xoff_rx);
|
|
|
|
/* No new LFC xoff rx */
|
|
if (!(nsd->link_xoff_rx - xoff))
|
|
return;
|
|
|
|
/* Clear the __I40E_HANG_CHECK_ARMED bit for all Tx rings */
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
struct i40e_vsi *vsi = pf->vsi[v];
|
|
|
|
if (!vsi)
|
|
continue;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
struct i40e_ring *ring = vsi->tx_rings[i];
|
|
clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_update_prio_xoff_rx - Update XOFF received in PFC mode
|
|
* @pf: the corresponding PF
|
|
*
|
|
* Update the Rx XOFF counter (PAUSE frames) in PFC mode
|
|
**/
|
|
static void i40e_update_prio_xoff_rx(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw_port_stats *osd = &pf->stats_offsets;
|
|
struct i40e_hw_port_stats *nsd = &pf->stats;
|
|
bool xoff[I40E_MAX_TRAFFIC_CLASS] = {false};
|
|
struct i40e_dcbx_config *dcb_cfg;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u16 i, v;
|
|
u8 tc;
|
|
|
|
dcb_cfg = &hw->local_dcbx_config;
|
|
|
|
/* See if DCB enabled with PFC TC */
|
|
if (!(pf->flags & I40E_FLAG_DCB_ENABLED) ||
|
|
!(dcb_cfg->pfc.pfcenable)) {
|
|
i40e_update_link_xoff_rx(pf);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
|
|
u64 prio_xoff = nsd->priority_xoff_rx[i];
|
|
i40e_stat_update32(hw, I40E_GLPRT_PXOFFRXC(hw->port, i),
|
|
pf->stat_offsets_loaded,
|
|
&osd->priority_xoff_rx[i],
|
|
&nsd->priority_xoff_rx[i]);
|
|
|
|
/* No new PFC xoff rx */
|
|
if (!(nsd->priority_xoff_rx[i] - prio_xoff))
|
|
continue;
|
|
/* Get the TC for given priority */
|
|
tc = dcb_cfg->etscfg.prioritytable[i];
|
|
xoff[tc] = true;
|
|
}
|
|
|
|
/* Clear the __I40E_HANG_CHECK_ARMED bit for Tx rings */
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
struct i40e_vsi *vsi = pf->vsi[v];
|
|
|
|
if (!vsi)
|
|
continue;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
struct i40e_ring *ring = vsi->tx_rings[i];
|
|
|
|
tc = ring->dcb_tc;
|
|
if (xoff[tc])
|
|
clear_bit(__I40E_HANG_CHECK_ARMED,
|
|
&ring->state);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_update_stats - Update the board statistics counters.
|
|
* @vsi: the VSI to be updated
|
|
*
|
|
* There are a few instances where we store the same stat in a
|
|
* couple of different structs. This is partly because we have
|
|
* the netdev stats that need to be filled out, which is slightly
|
|
* different from the "eth_stats" defined by the chip and used in
|
|
* VF communications. We sort it all out here in a central place.
|
|
**/
|
|
void i40e_update_stats(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct rtnl_link_stats64 *ons;
|
|
struct rtnl_link_stats64 *ns; /* netdev stats */
|
|
struct i40e_eth_stats *oes;
|
|
struct i40e_eth_stats *es; /* device's eth stats */
|
|
u32 tx_restart, tx_busy;
|
|
u32 rx_page, rx_buf;
|
|
u64 rx_p, rx_b;
|
|
u64 tx_p, tx_b;
|
|
int i;
|
|
u16 q;
|
|
|
|
if (test_bit(__I40E_DOWN, &vsi->state) ||
|
|
test_bit(__I40E_CONFIG_BUSY, &pf->state))
|
|
return;
|
|
|
|
ns = i40e_get_vsi_stats_struct(vsi);
|
|
ons = &vsi->net_stats_offsets;
|
|
es = &vsi->eth_stats;
|
|
oes = &vsi->eth_stats_offsets;
|
|
|
|
/* Gather up the netdev and vsi stats that the driver collects
|
|
* on the fly during packet processing
|
|
*/
|
|
rx_b = rx_p = 0;
|
|
tx_b = tx_p = 0;
|
|
tx_restart = tx_busy = 0;
|
|
rx_page = 0;
|
|
rx_buf = 0;
|
|
rcu_read_lock();
|
|
for (q = 0; q < vsi->num_queue_pairs; q++) {
|
|
struct i40e_ring *p;
|
|
u64 bytes, packets;
|
|
unsigned int start;
|
|
|
|
/* locate Tx ring */
|
|
p = ACCESS_ONCE(vsi->tx_rings[q]);
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&p->syncp);
|
|
packets = p->stats.packets;
|
|
bytes = p->stats.bytes;
|
|
} while (u64_stats_fetch_retry_bh(&p->syncp, start));
|
|
tx_b += bytes;
|
|
tx_p += packets;
|
|
tx_restart += p->tx_stats.restart_queue;
|
|
tx_busy += p->tx_stats.tx_busy;
|
|
|
|
/* Rx queue is part of the same block as Tx queue */
|
|
p = &p[1];
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&p->syncp);
|
|
packets = p->stats.packets;
|
|
bytes = p->stats.bytes;
|
|
} while (u64_stats_fetch_retry_bh(&p->syncp, start));
|
|
rx_b += bytes;
|
|
rx_p += packets;
|
|
rx_buf += p->rx_stats.alloc_rx_buff_failed;
|
|
rx_page += p->rx_stats.alloc_rx_page_failed;
|
|
}
|
|
rcu_read_unlock();
|
|
vsi->tx_restart = tx_restart;
|
|
vsi->tx_busy = tx_busy;
|
|
vsi->rx_page_failed = rx_page;
|
|
vsi->rx_buf_failed = rx_buf;
|
|
|
|
ns->rx_packets = rx_p;
|
|
ns->rx_bytes = rx_b;
|
|
ns->tx_packets = tx_p;
|
|
ns->tx_bytes = tx_b;
|
|
|
|
i40e_update_eth_stats(vsi);
|
|
/* update netdev stats from eth stats */
|
|
ons->rx_errors = oes->rx_errors;
|
|
ns->rx_errors = es->rx_errors;
|
|
ons->tx_errors = oes->tx_errors;
|
|
ns->tx_errors = es->tx_errors;
|
|
ons->multicast = oes->rx_multicast;
|
|
ns->multicast = es->rx_multicast;
|
|
ons->tx_dropped = oes->tx_discards;
|
|
ns->tx_dropped = es->tx_discards;
|
|
|
|
/* Get the port data only if this is the main PF VSI */
|
|
if (vsi == pf->vsi[pf->lan_vsi]) {
|
|
struct i40e_hw_port_stats *nsd = &pf->stats;
|
|
struct i40e_hw_port_stats *osd = &pf->stats_offsets;
|
|
|
|
i40e_stat_update48(hw, I40E_GLPRT_GORCH(hw->port),
|
|
I40E_GLPRT_GORCL(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->eth.rx_bytes, &nsd->eth.rx_bytes);
|
|
i40e_stat_update48(hw, I40E_GLPRT_GOTCH(hw->port),
|
|
I40E_GLPRT_GOTCL(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->eth.tx_bytes, &nsd->eth.tx_bytes);
|
|
i40e_stat_update32(hw, I40E_GLPRT_RDPC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->eth.rx_discards,
|
|
&nsd->eth.rx_discards);
|
|
i40e_stat_update32(hw, I40E_GLPRT_TDPC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->eth.tx_discards,
|
|
&nsd->eth.tx_discards);
|
|
i40e_stat_update48(hw, I40E_GLPRT_MPRCH(hw->port),
|
|
I40E_GLPRT_MPRCL(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->eth.rx_multicast,
|
|
&nsd->eth.rx_multicast);
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_TDOLD(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_dropped_link_down,
|
|
&nsd->tx_dropped_link_down);
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_CRCERRS(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->crc_errors, &nsd->crc_errors);
|
|
ns->rx_crc_errors = nsd->crc_errors;
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_ILLERRC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->illegal_bytes, &nsd->illegal_bytes);
|
|
ns->rx_errors = nsd->crc_errors
|
|
+ nsd->illegal_bytes;
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_MLFC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->mac_local_faults,
|
|
&nsd->mac_local_faults);
|
|
i40e_stat_update32(hw, I40E_GLPRT_MRFC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->mac_remote_faults,
|
|
&nsd->mac_remote_faults);
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_RLEC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_length_errors,
|
|
&nsd->rx_length_errors);
|
|
ns->rx_length_errors = nsd->rx_length_errors;
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_LXONRXC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->link_xon_rx, &nsd->link_xon_rx);
|
|
i40e_stat_update32(hw, I40E_GLPRT_LXONTXC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->link_xon_tx, &nsd->link_xon_tx);
|
|
i40e_update_prio_xoff_rx(pf); /* handles I40E_GLPRT_LXOFFRXC */
|
|
i40e_stat_update32(hw, I40E_GLPRT_LXOFFTXC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->link_xoff_tx, &nsd->link_xoff_tx);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
i40e_stat_update32(hw, I40E_GLPRT_PXONRXC(hw->port, i),
|
|
pf->stat_offsets_loaded,
|
|
&osd->priority_xon_rx[i],
|
|
&nsd->priority_xon_rx[i]);
|
|
i40e_stat_update32(hw, I40E_GLPRT_PXONTXC(hw->port, i),
|
|
pf->stat_offsets_loaded,
|
|
&osd->priority_xon_tx[i],
|
|
&nsd->priority_xon_tx[i]);
|
|
i40e_stat_update32(hw, I40E_GLPRT_PXOFFTXC(hw->port, i),
|
|
pf->stat_offsets_loaded,
|
|
&osd->priority_xoff_tx[i],
|
|
&nsd->priority_xoff_tx[i]);
|
|
i40e_stat_update32(hw,
|
|
I40E_GLPRT_RXON2OFFCNT(hw->port, i),
|
|
pf->stat_offsets_loaded,
|
|
&osd->priority_xon_2_xoff[i],
|
|
&nsd->priority_xon_2_xoff[i]);
|
|
}
|
|
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC64H(hw->port),
|
|
I40E_GLPRT_PRC64L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_64, &nsd->rx_size_64);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC127H(hw->port),
|
|
I40E_GLPRT_PRC127L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_127, &nsd->rx_size_127);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC255H(hw->port),
|
|
I40E_GLPRT_PRC255L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_255, &nsd->rx_size_255);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC511H(hw->port),
|
|
I40E_GLPRT_PRC511L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_511, &nsd->rx_size_511);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC1023H(hw->port),
|
|
I40E_GLPRT_PRC1023L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_1023, &nsd->rx_size_1023);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC1522H(hw->port),
|
|
I40E_GLPRT_PRC1522L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_1522, &nsd->rx_size_1522);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PRC9522H(hw->port),
|
|
I40E_GLPRT_PRC9522L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_size_big, &nsd->rx_size_big);
|
|
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC64H(hw->port),
|
|
I40E_GLPRT_PTC64L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_64, &nsd->tx_size_64);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC127H(hw->port),
|
|
I40E_GLPRT_PTC127L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_127, &nsd->tx_size_127);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC255H(hw->port),
|
|
I40E_GLPRT_PTC255L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_255, &nsd->tx_size_255);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC511H(hw->port),
|
|
I40E_GLPRT_PTC511L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_511, &nsd->tx_size_511);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC1023H(hw->port),
|
|
I40E_GLPRT_PTC1023L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_1023, &nsd->tx_size_1023);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC1522H(hw->port),
|
|
I40E_GLPRT_PTC1522L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_1522, &nsd->tx_size_1522);
|
|
i40e_stat_update48(hw, I40E_GLPRT_PTC9522H(hw->port),
|
|
I40E_GLPRT_PTC9522L(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->tx_size_big, &nsd->tx_size_big);
|
|
|
|
i40e_stat_update32(hw, I40E_GLPRT_RUC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_undersize, &nsd->rx_undersize);
|
|
i40e_stat_update32(hw, I40E_GLPRT_RFC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_fragments, &nsd->rx_fragments);
|
|
i40e_stat_update32(hw, I40E_GLPRT_ROC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_oversize, &nsd->rx_oversize);
|
|
i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port),
|
|
pf->stat_offsets_loaded,
|
|
&osd->rx_jabber, &nsd->rx_jabber);
|
|
}
|
|
|
|
pf->stat_offsets_loaded = true;
|
|
}
|
|
|
|
/**
|
|
* i40e_find_filter - Search VSI filter list for specific mac/vlan filter
|
|
* @vsi: the VSI to be searched
|
|
* @macaddr: the MAC address
|
|
* @vlan: the vlan
|
|
* @is_vf: make sure its a vf filter, else doesn't matter
|
|
* @is_netdev: make sure its a netdev filter, else doesn't matter
|
|
*
|
|
* Returns ptr to the filter object or NULL
|
|
**/
|
|
static struct i40e_mac_filter *i40e_find_filter(struct i40e_vsi *vsi,
|
|
u8 *macaddr, s16 vlan,
|
|
bool is_vf, bool is_netdev)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
if (!vsi || !macaddr)
|
|
return NULL;
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if ((ether_addr_equal(macaddr, f->macaddr)) &&
|
|
(vlan == f->vlan) &&
|
|
(!is_vf || f->is_vf) &&
|
|
(!is_netdev || f->is_netdev))
|
|
return f;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_find_mac - Find a mac addr in the macvlan filters list
|
|
* @vsi: the VSI to be searched
|
|
* @macaddr: the MAC address we are searching for
|
|
* @is_vf: make sure its a vf filter, else doesn't matter
|
|
* @is_netdev: make sure its a netdev filter, else doesn't matter
|
|
*
|
|
* Returns the first filter with the provided MAC address or NULL if
|
|
* MAC address was not found
|
|
**/
|
|
struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
|
|
bool is_vf, bool is_netdev)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
if (!vsi || !macaddr)
|
|
return NULL;
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if ((ether_addr_equal(macaddr, f->macaddr)) &&
|
|
(!is_vf || f->is_vf) &&
|
|
(!is_netdev || f->is_netdev))
|
|
return f;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_is_vsi_in_vlan - Check if VSI is in vlan mode
|
|
* @vsi: the VSI to be searched
|
|
*
|
|
* Returns true if VSI is in vlan mode or false otherwise
|
|
**/
|
|
bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
/* Only -1 for all the filters denotes not in vlan mode
|
|
* so we have to go through all the list in order to make sure
|
|
*/
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if (f->vlan >= 0)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* i40e_put_mac_in_vlan - Make macvlan filters from macaddrs and vlans
|
|
* @vsi: the VSI to be searched
|
|
* @macaddr: the mac address to be filtered
|
|
* @is_vf: true if it is a vf
|
|
* @is_netdev: true if it is a netdev
|
|
*
|
|
* Goes through all the macvlan filters and adds a
|
|
* macvlan filter for each unique vlan that already exists
|
|
*
|
|
* Returns first filter found on success, else NULL
|
|
**/
|
|
struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
|
|
bool is_vf, bool is_netdev)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if (!i40e_find_filter(vsi, macaddr, f->vlan,
|
|
is_vf, is_netdev)) {
|
|
if (!i40e_add_filter(vsi, macaddr, f->vlan,
|
|
is_vf, is_netdev))
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
return list_first_entry_or_null(&vsi->mac_filter_list,
|
|
struct i40e_mac_filter, list);
|
|
}
|
|
|
|
/**
|
|
* i40e_add_filter - Add a mac/vlan filter to the VSI
|
|
* @vsi: the VSI to be searched
|
|
* @macaddr: the MAC address
|
|
* @vlan: the vlan
|
|
* @is_vf: make sure its a vf filter, else doesn't matter
|
|
* @is_netdev: make sure its a netdev filter, else doesn't matter
|
|
*
|
|
* Returns ptr to the filter object or NULL when no memory available.
|
|
**/
|
|
struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
|
|
u8 *macaddr, s16 vlan,
|
|
bool is_vf, bool is_netdev)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
if (!vsi || !macaddr)
|
|
return NULL;
|
|
|
|
f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
|
|
if (!f) {
|
|
f = kzalloc(sizeof(*f), GFP_ATOMIC);
|
|
if (!f)
|
|
goto add_filter_out;
|
|
|
|
memcpy(f->macaddr, macaddr, ETH_ALEN);
|
|
f->vlan = vlan;
|
|
f->changed = true;
|
|
|
|
INIT_LIST_HEAD(&f->list);
|
|
list_add(&f->list, &vsi->mac_filter_list);
|
|
}
|
|
|
|
/* increment counter and add a new flag if needed */
|
|
if (is_vf) {
|
|
if (!f->is_vf) {
|
|
f->is_vf = true;
|
|
f->counter++;
|
|
}
|
|
} else if (is_netdev) {
|
|
if (!f->is_netdev) {
|
|
f->is_netdev = true;
|
|
f->counter++;
|
|
}
|
|
} else {
|
|
f->counter++;
|
|
}
|
|
|
|
/* changed tells sync_filters_subtask to
|
|
* push the filter down to the firmware
|
|
*/
|
|
if (f->changed) {
|
|
vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
|
|
vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
|
|
}
|
|
|
|
add_filter_out:
|
|
return f;
|
|
}
|
|
|
|
/**
|
|
* i40e_del_filter - Remove a mac/vlan filter from the VSI
|
|
* @vsi: the VSI to be searched
|
|
* @macaddr: the MAC address
|
|
* @vlan: the vlan
|
|
* @is_vf: make sure it's a vf filter, else doesn't matter
|
|
* @is_netdev: make sure it's a netdev filter, else doesn't matter
|
|
**/
|
|
void i40e_del_filter(struct i40e_vsi *vsi,
|
|
u8 *macaddr, s16 vlan,
|
|
bool is_vf, bool is_netdev)
|
|
{
|
|
struct i40e_mac_filter *f;
|
|
|
|
if (!vsi || !macaddr)
|
|
return;
|
|
|
|
f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
|
|
if (!f || f->counter == 0)
|
|
return;
|
|
|
|
if (is_vf) {
|
|
if (f->is_vf) {
|
|
f->is_vf = false;
|
|
f->counter--;
|
|
}
|
|
} else if (is_netdev) {
|
|
if (f->is_netdev) {
|
|
f->is_netdev = false;
|
|
f->counter--;
|
|
}
|
|
} else {
|
|
/* make sure we don't remove a filter in use by vf or netdev */
|
|
int min_f = 0;
|
|
min_f += (f->is_vf ? 1 : 0);
|
|
min_f += (f->is_netdev ? 1 : 0);
|
|
|
|
if (f->counter > min_f)
|
|
f->counter--;
|
|
}
|
|
|
|
/* counter == 0 tells sync_filters_subtask to
|
|
* remove the filter from the firmware's list
|
|
*/
|
|
if (f->counter == 0) {
|
|
f->changed = true;
|
|
vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
|
|
vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_set_mac - NDO callback to set mac address
|
|
* @netdev: network interface device structure
|
|
* @p: pointer to an address structure
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int i40e_set_mac(struct net_device *netdev, void *p)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct sockaddr *addr = p;
|
|
struct i40e_mac_filter *f;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
netdev_info(netdev, "set mac address=%pM\n", addr->sa_data);
|
|
|
|
if (ether_addr_equal(netdev->dev_addr, addr->sa_data))
|
|
return 0;
|
|
|
|
if (vsi->type == I40E_VSI_MAIN) {
|
|
i40e_status ret;
|
|
ret = i40e_aq_mac_address_write(&vsi->back->hw,
|
|
I40E_AQC_WRITE_TYPE_LAA_ONLY,
|
|
addr->sa_data, NULL);
|
|
if (ret) {
|
|
netdev_info(netdev,
|
|
"Addr change for Main VSI failed: %d\n",
|
|
ret);
|
|
return -EADDRNOTAVAIL;
|
|
}
|
|
|
|
memcpy(vsi->back->hw.mac.addr, addr->sa_data, netdev->addr_len);
|
|
}
|
|
|
|
/* In order to be sure to not drop any packets, add the new address
|
|
* then delete the old one.
|
|
*/
|
|
f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY, false, false);
|
|
if (!f)
|
|
return -ENOMEM;
|
|
|
|
i40e_sync_vsi_filters(vsi);
|
|
i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY, false, false);
|
|
i40e_sync_vsi_filters(vsi);
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc
|
|
* @vsi: the VSI being setup
|
|
* @ctxt: VSI context structure
|
|
* @enabled_tc: Enabled TCs bitmap
|
|
* @is_add: True if called before Add VSI
|
|
*
|
|
* Setup VSI queue mapping for enabled traffic classes.
|
|
**/
|
|
static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
|
|
struct i40e_vsi_context *ctxt,
|
|
u8 enabled_tc,
|
|
bool is_add)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
u16 sections = 0;
|
|
u8 netdev_tc = 0;
|
|
u16 numtc = 0;
|
|
u16 qcount;
|
|
u8 offset;
|
|
u16 qmap;
|
|
int i;
|
|
|
|
sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
|
|
offset = 0;
|
|
|
|
if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
/* Find numtc from enabled TC bitmap */
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
if (enabled_tc & (1 << i)) /* TC is enabled */
|
|
numtc++;
|
|
}
|
|
if (!numtc) {
|
|
dev_warn(&pf->pdev->dev, "DCB is enabled but no TC enabled, forcing TC0\n");
|
|
numtc = 1;
|
|
}
|
|
} else {
|
|
/* At least TC0 is enabled in case of non-DCB case */
|
|
numtc = 1;
|
|
}
|
|
|
|
vsi->tc_config.numtc = numtc;
|
|
vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1;
|
|
|
|
/* Setup queue offset/count for all TCs for given VSI */
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
/* See if the given TC is enabled for the given VSI */
|
|
if (vsi->tc_config.enabled_tc & (1 << i)) { /* TC is enabled */
|
|
int pow, num_qps;
|
|
|
|
vsi->tc_config.tc_info[i].qoffset = offset;
|
|
switch (vsi->type) {
|
|
case I40E_VSI_MAIN:
|
|
if (i == 0)
|
|
qcount = pf->rss_size;
|
|
else
|
|
qcount = pf->num_tc_qps;
|
|
vsi->tc_config.tc_info[i].qcount = qcount;
|
|
break;
|
|
case I40E_VSI_FDIR:
|
|
case I40E_VSI_SRIOV:
|
|
case I40E_VSI_VMDQ2:
|
|
default:
|
|
qcount = vsi->alloc_queue_pairs;
|
|
vsi->tc_config.tc_info[i].qcount = qcount;
|
|
WARN_ON(i != 0);
|
|
break;
|
|
}
|
|
|
|
/* find the power-of-2 of the number of queue pairs */
|
|
num_qps = vsi->tc_config.tc_info[i].qcount;
|
|
pow = 0;
|
|
while (num_qps &&
|
|
((1 << pow) < vsi->tc_config.tc_info[i].qcount)) {
|
|
pow++;
|
|
num_qps >>= 1;
|
|
}
|
|
|
|
vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++;
|
|
qmap =
|
|
(offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) |
|
|
(pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT);
|
|
|
|
offset += vsi->tc_config.tc_info[i].qcount;
|
|
} else {
|
|
/* TC is not enabled so set the offset to
|
|
* default queue and allocate one queue
|
|
* for the given TC.
|
|
*/
|
|
vsi->tc_config.tc_info[i].qoffset = 0;
|
|
vsi->tc_config.tc_info[i].qcount = 1;
|
|
vsi->tc_config.tc_info[i].netdev_tc = 0;
|
|
|
|
qmap = 0;
|
|
}
|
|
ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
|
|
}
|
|
|
|
/* Set actual Tx/Rx queue pairs */
|
|
vsi->num_queue_pairs = offset;
|
|
|
|
/* Scheduler section valid can only be set for ADD VSI */
|
|
if (is_add) {
|
|
sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
|
|
|
|
ctxt->info.up_enable_bits = enabled_tc;
|
|
}
|
|
if (vsi->type == I40E_VSI_SRIOV) {
|
|
ctxt->info.mapping_flags |=
|
|
cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG);
|
|
for (i = 0; i < vsi->num_queue_pairs; i++)
|
|
ctxt->info.queue_mapping[i] =
|
|
cpu_to_le16(vsi->base_queue + i);
|
|
} else {
|
|
ctxt->info.mapping_flags |=
|
|
cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG);
|
|
ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue);
|
|
}
|
|
ctxt->info.valid_sections |= cpu_to_le16(sections);
|
|
}
|
|
|
|
/**
|
|
* i40e_set_rx_mode - NDO callback to set the netdev filters
|
|
* @netdev: network interface device structure
|
|
**/
|
|
static void i40e_set_rx_mode(struct net_device *netdev)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_mac_filter *f, *ftmp;
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct netdev_hw_addr *uca;
|
|
struct netdev_hw_addr *mca;
|
|
struct netdev_hw_addr *ha;
|
|
|
|
/* add addr if not already in the filter list */
|
|
netdev_for_each_uc_addr(uca, netdev) {
|
|
if (!i40e_find_mac(vsi, uca->addr, false, true)) {
|
|
if (i40e_is_vsi_in_vlan(vsi))
|
|
i40e_put_mac_in_vlan(vsi, uca->addr,
|
|
false, true);
|
|
else
|
|
i40e_add_filter(vsi, uca->addr, I40E_VLAN_ANY,
|
|
false, true);
|
|
}
|
|
}
|
|
|
|
netdev_for_each_mc_addr(mca, netdev) {
|
|
if (!i40e_find_mac(vsi, mca->addr, false, true)) {
|
|
if (i40e_is_vsi_in_vlan(vsi))
|
|
i40e_put_mac_in_vlan(vsi, mca->addr,
|
|
false, true);
|
|
else
|
|
i40e_add_filter(vsi, mca->addr, I40E_VLAN_ANY,
|
|
false, true);
|
|
}
|
|
}
|
|
|
|
/* remove filter if not in netdev list */
|
|
list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
|
|
bool found = false;
|
|
|
|
if (!f->is_netdev)
|
|
continue;
|
|
|
|
if (is_multicast_ether_addr(f->macaddr)) {
|
|
netdev_for_each_mc_addr(mca, netdev) {
|
|
if (ether_addr_equal(mca->addr, f->macaddr)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
netdev_for_each_uc_addr(uca, netdev) {
|
|
if (ether_addr_equal(uca->addr, f->macaddr)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
for_each_dev_addr(netdev, ha) {
|
|
if (ether_addr_equal(ha->addr, f->macaddr)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (!found)
|
|
i40e_del_filter(
|
|
vsi, f->macaddr, I40E_VLAN_ANY, false, true);
|
|
}
|
|
|
|
/* check for other flag changes */
|
|
if (vsi->current_netdev_flags != vsi->netdev->flags) {
|
|
vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
|
|
vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_sync_vsi_filters - Update the VSI filter list to the HW
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* Push any outstanding VSI filter changes through the AdminQ.
|
|
*
|
|
* Returns 0 or error value
|
|
**/
|
|
int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_mac_filter *f, *ftmp;
|
|
bool promisc_forced_on = false;
|
|
bool add_happened = false;
|
|
int filter_list_len = 0;
|
|
u32 changed_flags = 0;
|
|
i40e_status aq_ret = 0;
|
|
struct i40e_pf *pf;
|
|
int num_add = 0;
|
|
int num_del = 0;
|
|
u16 cmd_flags;
|
|
|
|
/* empty array typed pointers, kcalloc later */
|
|
struct i40e_aqc_add_macvlan_element_data *add_list;
|
|
struct i40e_aqc_remove_macvlan_element_data *del_list;
|
|
|
|
while (test_and_set_bit(__I40E_CONFIG_BUSY, &vsi->state))
|
|
usleep_range(1000, 2000);
|
|
pf = vsi->back;
|
|
|
|
if (vsi->netdev) {
|
|
changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags;
|
|
vsi->current_netdev_flags = vsi->netdev->flags;
|
|
}
|
|
|
|
if (vsi->flags & I40E_VSI_FLAG_FILTER_CHANGED) {
|
|
vsi->flags &= ~I40E_VSI_FLAG_FILTER_CHANGED;
|
|
|
|
filter_list_len = pf->hw.aq.asq_buf_size /
|
|
sizeof(struct i40e_aqc_remove_macvlan_element_data);
|
|
del_list = kcalloc(filter_list_len,
|
|
sizeof(struct i40e_aqc_remove_macvlan_element_data),
|
|
GFP_KERNEL);
|
|
if (!del_list)
|
|
return -ENOMEM;
|
|
|
|
list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
|
|
if (!f->changed)
|
|
continue;
|
|
|
|
if (f->counter != 0)
|
|
continue;
|
|
f->changed = false;
|
|
cmd_flags = 0;
|
|
|
|
/* add to delete list */
|
|
memcpy(del_list[num_del].mac_addr,
|
|
f->macaddr, ETH_ALEN);
|
|
del_list[num_del].vlan_tag =
|
|
cpu_to_le16((u16)(f->vlan ==
|
|
I40E_VLAN_ANY ? 0 : f->vlan));
|
|
|
|
/* vlan0 as wild card to allow packets from all vlans */
|
|
if (f->vlan == I40E_VLAN_ANY ||
|
|
(vsi->netdev && !(vsi->netdev->features &
|
|
NETIF_F_HW_VLAN_CTAG_FILTER)))
|
|
cmd_flags |= I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
|
|
cmd_flags |= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
|
|
del_list[num_del].flags = cmd_flags;
|
|
num_del++;
|
|
|
|
/* unlink from filter list */
|
|
list_del(&f->list);
|
|
kfree(f);
|
|
|
|
/* flush a full buffer */
|
|
if (num_del == filter_list_len) {
|
|
aq_ret = i40e_aq_remove_macvlan(&pf->hw,
|
|
vsi->seid, del_list, num_del,
|
|
NULL);
|
|
num_del = 0;
|
|
memset(del_list, 0, sizeof(*del_list));
|
|
|
|
if (aq_ret)
|
|
dev_info(&pf->pdev->dev,
|
|
"ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n",
|
|
aq_ret,
|
|
pf->hw.aq.asq_last_status);
|
|
}
|
|
}
|
|
if (num_del) {
|
|
aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid,
|
|
del_list, num_del, NULL);
|
|
num_del = 0;
|
|
|
|
if (aq_ret)
|
|
dev_info(&pf->pdev->dev,
|
|
"ignoring delete macvlan error, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
}
|
|
|
|
kfree(del_list);
|
|
del_list = NULL;
|
|
|
|
/* do all the adds now */
|
|
filter_list_len = pf->hw.aq.asq_buf_size /
|
|
sizeof(struct i40e_aqc_add_macvlan_element_data),
|
|
add_list = kcalloc(filter_list_len,
|
|
sizeof(struct i40e_aqc_add_macvlan_element_data),
|
|
GFP_KERNEL);
|
|
if (!add_list)
|
|
return -ENOMEM;
|
|
|
|
list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
|
|
if (!f->changed)
|
|
continue;
|
|
|
|
if (f->counter == 0)
|
|
continue;
|
|
f->changed = false;
|
|
add_happened = true;
|
|
cmd_flags = 0;
|
|
|
|
/* add to add array */
|
|
memcpy(add_list[num_add].mac_addr,
|
|
f->macaddr, ETH_ALEN);
|
|
add_list[num_add].vlan_tag =
|
|
cpu_to_le16(
|
|
(u16)(f->vlan == I40E_VLAN_ANY ? 0 : f->vlan));
|
|
add_list[num_add].queue_number = 0;
|
|
|
|
cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH;
|
|
|
|
/* vlan0 as wild card to allow packets from all vlans */
|
|
if (f->vlan == I40E_VLAN_ANY || (vsi->netdev &&
|
|
!(vsi->netdev->features &
|
|
NETIF_F_HW_VLAN_CTAG_FILTER)))
|
|
cmd_flags |= I40E_AQC_MACVLAN_ADD_IGNORE_VLAN;
|
|
add_list[num_add].flags = cpu_to_le16(cmd_flags);
|
|
num_add++;
|
|
|
|
/* flush a full buffer */
|
|
if (num_add == filter_list_len) {
|
|
aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
|
|
add_list, num_add,
|
|
NULL);
|
|
num_add = 0;
|
|
|
|
if (aq_ret)
|
|
break;
|
|
memset(add_list, 0, sizeof(*add_list));
|
|
}
|
|
}
|
|
if (num_add) {
|
|
aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
|
|
add_list, num_add, NULL);
|
|
num_add = 0;
|
|
}
|
|
kfree(add_list);
|
|
add_list = NULL;
|
|
|
|
if (add_happened && (!aq_ret)) {
|
|
/* do nothing */;
|
|
} else if (add_happened && (aq_ret)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"add filter failed, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) &&
|
|
!test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
|
|
&vsi->state)) {
|
|
promisc_forced_on = true;
|
|
set_bit(__I40E_FILTER_OVERFLOW_PROMISC,
|
|
&vsi->state);
|
|
dev_info(&pf->pdev->dev, "promiscuous mode forced on\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/* check for changes in promiscuous modes */
|
|
if (changed_flags & IFF_ALLMULTI) {
|
|
bool cur_multipromisc;
|
|
cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI);
|
|
aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw,
|
|
vsi->seid,
|
|
cur_multipromisc,
|
|
NULL);
|
|
if (aq_ret)
|
|
dev_info(&pf->pdev->dev,
|
|
"set multi promisc failed, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
}
|
|
if ((changed_flags & IFF_PROMISC) || promisc_forced_on) {
|
|
bool cur_promisc;
|
|
cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
|
|
test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
|
|
&vsi->state));
|
|
aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw,
|
|
vsi->seid,
|
|
cur_promisc, NULL);
|
|
if (aq_ret)
|
|
dev_info(&pf->pdev->dev,
|
|
"set uni promisc failed, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
}
|
|
|
|
clear_bit(__I40E_CONFIG_BUSY, &vsi->state);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_sync_filters_subtask - Sync the VSI filter list with HW
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_sync_filters_subtask(struct i40e_pf *pf)
|
|
{
|
|
int v;
|
|
|
|
if (!pf || !(pf->flags & I40E_FLAG_FILTER_SYNC))
|
|
return;
|
|
pf->flags &= ~I40E_FLAG_FILTER_SYNC;
|
|
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
if (pf->vsi[v] &&
|
|
(pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED))
|
|
i40e_sync_vsi_filters(pf->vsi[v]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_change_mtu - NDO callback to change the Maximum Transfer Unit
|
|
* @netdev: network interface device structure
|
|
* @new_mtu: new value for maximum frame size
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
|
|
/* MTU < 68 is an error and causes problems on some kernels */
|
|
if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER))
|
|
return -EINVAL;
|
|
|
|
netdev_info(netdev, "changing MTU from %d to %d\n",
|
|
netdev->mtu, new_mtu);
|
|
netdev->mtu = new_mtu;
|
|
if (netif_running(netdev))
|
|
i40e_vsi_reinit_locked(vsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI
|
|
* @vsi: the vsi being adjusted
|
|
**/
|
|
void i40e_vlan_stripping_enable(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_vsi_context ctxt;
|
|
i40e_status ret;
|
|
|
|
if ((vsi->info.valid_sections &
|
|
cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
|
|
((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0))
|
|
return; /* already enabled */
|
|
|
|
vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
|
|
vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
|
|
I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
|
|
|
|
ctxt.seid = vsi->seid;
|
|
memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
|
|
ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"%s: update vsi failed, aq_err=%d\n",
|
|
__func__, vsi->back->hw.aq.asq_last_status);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_vlan_stripping_disable - Turn off vlan stripping for the VSI
|
|
* @vsi: the vsi being adjusted
|
|
**/
|
|
void i40e_vlan_stripping_disable(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_vsi_context ctxt;
|
|
i40e_status ret;
|
|
|
|
if ((vsi->info.valid_sections &
|
|
cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
|
|
((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_EMOD_MASK) ==
|
|
I40E_AQ_VSI_PVLAN_EMOD_MASK))
|
|
return; /* already disabled */
|
|
|
|
vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
|
|
vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
|
|
I40E_AQ_VSI_PVLAN_EMOD_NOTHING;
|
|
|
|
ctxt.seid = vsi->seid;
|
|
memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
|
|
ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"%s: update vsi failed, aq_err=%d\n",
|
|
__func__, vsi->back->hw.aq.asq_last_status);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_vlan_rx_register - Setup or shutdown vlan offload
|
|
* @netdev: network interface to be adjusted
|
|
* @features: netdev features to test if VLAN offload is enabled or not
|
|
**/
|
|
static void i40e_vlan_rx_register(struct net_device *netdev, u32 features)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
|
|
if (features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
i40e_vlan_stripping_enable(vsi);
|
|
else
|
|
i40e_vlan_stripping_disable(vsi);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_add_vlan - Add vsi membership for given vlan
|
|
* @vsi: the vsi being configured
|
|
* @vid: vlan id to be added (0 = untagged only , -1 = any)
|
|
**/
|
|
int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
|
|
{
|
|
struct i40e_mac_filter *f, *add_f;
|
|
bool is_netdev, is_vf;
|
|
int ret;
|
|
|
|
is_vf = (vsi->type == I40E_VSI_SRIOV);
|
|
is_netdev = !!(vsi->netdev);
|
|
|
|
if (is_netdev) {
|
|
add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, vid,
|
|
is_vf, is_netdev);
|
|
if (!add_f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add vlan filter %d for %pM\n",
|
|
vid, vsi->netdev->dev_addr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
add_f = i40e_add_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
|
|
if (!add_f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add vlan filter %d for %pM\n",
|
|
vid, f->macaddr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
ret = i40e_sync_vsi_filters(vsi);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not sync filters for vid %d\n", vid);
|
|
return ret;
|
|
}
|
|
|
|
/* Now if we add a vlan tag, make sure to check if it is the first
|
|
* tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
|
|
* with 0, so we now accept untagged and specified tagged traffic
|
|
* (and not any taged and untagged)
|
|
*/
|
|
if (vid > 0) {
|
|
if (is_netdev && i40e_find_filter(vsi, vsi->netdev->dev_addr,
|
|
I40E_VLAN_ANY,
|
|
is_vf, is_netdev)) {
|
|
i40e_del_filter(vsi, vsi->netdev->dev_addr,
|
|
I40E_VLAN_ANY, is_vf, is_netdev);
|
|
add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, 0,
|
|
is_vf, is_netdev);
|
|
if (!add_f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add filter 0 for %pM\n",
|
|
vsi->netdev->dev_addr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if (i40e_find_filter(vsi, f->macaddr, I40E_VLAN_ANY,
|
|
is_vf, is_netdev)) {
|
|
i40e_del_filter(vsi, f->macaddr, I40E_VLAN_ANY,
|
|
is_vf, is_netdev);
|
|
add_f = i40e_add_filter(vsi, f->macaddr,
|
|
0, is_vf, is_netdev);
|
|
if (!add_f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add filter 0 for %pM\n",
|
|
f->macaddr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
}
|
|
ret = i40e_sync_vsi_filters(vsi);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_kill_vlan - Remove vsi membership for given vlan
|
|
* @vsi: the vsi being configured
|
|
* @vid: vlan id to be removed (0 = untagged only , -1 = any)
|
|
*
|
|
* Return: 0 on success or negative otherwise
|
|
**/
|
|
int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
|
|
{
|
|
struct net_device *netdev = vsi->netdev;
|
|
struct i40e_mac_filter *f, *add_f;
|
|
bool is_vf, is_netdev;
|
|
int filter_count = 0;
|
|
int ret;
|
|
|
|
is_vf = (vsi->type == I40E_VSI_SRIOV);
|
|
is_netdev = !!(netdev);
|
|
|
|
if (is_netdev)
|
|
i40e_del_filter(vsi, netdev->dev_addr, vid, is_vf, is_netdev);
|
|
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list)
|
|
i40e_del_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
|
|
|
|
ret = i40e_sync_vsi_filters(vsi);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev, "Could not sync filters\n");
|
|
return ret;
|
|
}
|
|
|
|
/* go through all the filters for this VSI and if there is only
|
|
* vid == 0 it means there are no other filters, so vid 0 must
|
|
* be replaced with -1. This signifies that we should from now
|
|
* on accept any traffic (with any tag present, or untagged)
|
|
*/
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
if (is_netdev) {
|
|
if (f->vlan &&
|
|
ether_addr_equal(netdev->dev_addr, f->macaddr))
|
|
filter_count++;
|
|
}
|
|
|
|
if (f->vlan)
|
|
filter_count++;
|
|
}
|
|
|
|
if (!filter_count && is_netdev) {
|
|
i40e_del_filter(vsi, netdev->dev_addr, 0, is_vf, is_netdev);
|
|
f = i40e_add_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
|
|
is_vf, is_netdev);
|
|
if (!f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add filter %d for %pM\n",
|
|
I40E_VLAN_ANY, netdev->dev_addr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
if (!filter_count) {
|
|
list_for_each_entry(f, &vsi->mac_filter_list, list) {
|
|
i40e_del_filter(vsi, f->macaddr, 0, is_vf, is_netdev);
|
|
add_f = i40e_add_filter(vsi, f->macaddr, I40E_VLAN_ANY,
|
|
is_vf, is_netdev);
|
|
if (!add_f) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Could not add filter %d for %pM\n",
|
|
I40E_VLAN_ANY, f->macaddr);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
}
|
|
|
|
return i40e_sync_vsi_filters(vsi);
|
|
}
|
|
|
|
/**
|
|
* i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
|
|
* @netdev: network interface to be adjusted
|
|
* @vid: vlan id to be added
|
|
*
|
|
* net_device_ops implementation for adding vlan ids
|
|
**/
|
|
static int i40e_vlan_rx_add_vid(struct net_device *netdev,
|
|
__always_unused __be16 proto, u16 vid)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
int ret = 0;
|
|
|
|
if (vid > 4095)
|
|
return -EINVAL;
|
|
|
|
netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
|
|
|
|
/* If the network stack called us with vid = 0, we should
|
|
* indicate to i40e_vsi_add_vlan() that we want to receive
|
|
* any traffic (i.e. with any vlan tag, or untagged)
|
|
*/
|
|
ret = i40e_vsi_add_vlan(vsi, vid ? vid : I40E_VLAN_ANY);
|
|
|
|
if (!ret && (vid < VLAN_N_VID))
|
|
set_bit(vid, vsi->active_vlans);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
|
|
* @netdev: network interface to be adjusted
|
|
* @vid: vlan id to be removed
|
|
*
|
|
* net_device_ops implementation for adding vlan ids
|
|
**/
|
|
static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
|
|
__always_unused __be16 proto, u16 vid)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
|
|
netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid);
|
|
|
|
/* return code is ignored as there is nothing a user
|
|
* can do about failure to remove and a log message was
|
|
* already printed from the other function
|
|
*/
|
|
i40e_vsi_kill_vlan(vsi, vid);
|
|
|
|
clear_bit(vid, vsi->active_vlans);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_restore_vlan - Reinstate vlans when vsi/netdev comes back up
|
|
* @vsi: the vsi being brought back up
|
|
**/
|
|
static void i40e_restore_vlan(struct i40e_vsi *vsi)
|
|
{
|
|
u16 vid;
|
|
|
|
if (!vsi->netdev)
|
|
return;
|
|
|
|
i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
|
|
|
|
for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID)
|
|
i40e_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q),
|
|
vid);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_add_pvid - Add pvid for the VSI
|
|
* @vsi: the vsi being adjusted
|
|
* @vid: the vlan id to set as a PVID
|
|
**/
|
|
int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
|
|
{
|
|
struct i40e_vsi_context ctxt;
|
|
i40e_status aq_ret;
|
|
|
|
vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
|
|
vsi->info.pvid = cpu_to_le16(vid);
|
|
vsi->info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_INSERT_PVID;
|
|
vsi->info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_UNTAGGED;
|
|
|
|
ctxt.seid = vsi->seid;
|
|
memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
|
|
aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
|
|
if (aq_ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"%s: update vsi failed, aq_err=%d\n",
|
|
__func__, vsi->back->hw.aq.asq_last_status);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_remove_pvid - Remove the pvid from the VSI
|
|
* @vsi: the vsi being adjusted
|
|
*
|
|
* Just use the vlan_rx_register() service to put it back to normal
|
|
**/
|
|
void i40e_vsi_remove_pvid(struct i40e_vsi *vsi)
|
|
{
|
|
vsi->info.pvid = 0;
|
|
i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_setup_tx_resources - Allocate VSI Tx queue resources
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* If this function returns with an error, then it's possible one or
|
|
* more of the rings is populated (while the rest are not). It is the
|
|
* callers duty to clean those orphaned rings.
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
**/
|
|
static int i40e_vsi_setup_tx_resources(struct i40e_vsi *vsi)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs && !err; i++)
|
|
err = i40e_setup_tx_descriptors(vsi->tx_rings[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_free_tx_resources - Free Tx resources for VSI queues
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* Free VSI's transmit software resources
|
|
**/
|
|
static void i40e_vsi_free_tx_resources(struct i40e_vsi *vsi)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++)
|
|
if (vsi->tx_rings[i]->desc)
|
|
i40e_free_tx_resources(vsi->tx_rings[i]);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_setup_rx_resources - Allocate VSI queues Rx resources
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* If this function returns with an error, then it's possible one or
|
|
* more of the rings is populated (while the rest are not). It is the
|
|
* callers duty to clean those orphaned rings.
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
**/
|
|
static int i40e_vsi_setup_rx_resources(struct i40e_vsi *vsi)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs && !err; i++)
|
|
err = i40e_setup_rx_descriptors(vsi->rx_rings[i]);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_free_rx_resources - Free Rx Resources for VSI queues
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* Free all receive software resources
|
|
**/
|
|
static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++)
|
|
if (vsi->rx_rings[i]->desc)
|
|
i40e_free_rx_resources(vsi->rx_rings[i]);
|
|
}
|
|
|
|
/**
|
|
* i40e_configure_tx_ring - Configure a transmit ring context and rest
|
|
* @ring: The Tx ring to configure
|
|
*
|
|
* Configure the Tx descriptor ring in the HMC context.
|
|
**/
|
|
static int i40e_configure_tx_ring(struct i40e_ring *ring)
|
|
{
|
|
struct i40e_vsi *vsi = ring->vsi;
|
|
u16 pf_q = vsi->base_queue + ring->queue_index;
|
|
struct i40e_hw *hw = &vsi->back->hw;
|
|
struct i40e_hmc_obj_txq tx_ctx;
|
|
i40e_status err = 0;
|
|
u32 qtx_ctl = 0;
|
|
|
|
/* some ATR related tx ring init */
|
|
if (vsi->back->flags & I40E_FLAG_FDIR_ATR_ENABLED) {
|
|
ring->atr_sample_rate = vsi->back->atr_sample_rate;
|
|
ring->atr_count = 0;
|
|
} else {
|
|
ring->atr_sample_rate = 0;
|
|
}
|
|
|
|
/* initialize XPS */
|
|
if (ring->q_vector && ring->netdev &&
|
|
!test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
|
|
netif_set_xps_queue(ring->netdev,
|
|
&ring->q_vector->affinity_mask,
|
|
ring->queue_index);
|
|
|
|
/* clear the context structure first */
|
|
memset(&tx_ctx, 0, sizeof(tx_ctx));
|
|
|
|
tx_ctx.new_context = 1;
|
|
tx_ctx.base = (ring->dma / 128);
|
|
tx_ctx.qlen = ring->count;
|
|
tx_ctx.fd_ena = !!(vsi->back->flags & (I40E_FLAG_FDIR_ENABLED |
|
|
I40E_FLAG_FDIR_ATR_ENABLED));
|
|
|
|
/* As part of VSI creation/update, FW allocates certain
|
|
* Tx arbitration queue sets for each TC enabled for
|
|
* the VSI. The FW returns the handles to these queue
|
|
* sets as part of the response buffer to Add VSI,
|
|
* Update VSI, etc. AQ commands. It is expected that
|
|
* these queue set handles be associated with the Tx
|
|
* queues by the driver as part of the TX queue context
|
|
* initialization. This has to be done regardless of
|
|
* DCB as by default everything is mapped to TC0.
|
|
*/
|
|
tx_ctx.rdylist = le16_to_cpu(vsi->info.qs_handle[ring->dcb_tc]);
|
|
tx_ctx.rdylist_act = 0;
|
|
|
|
/* clear the context in the HMC */
|
|
err = i40e_clear_lan_tx_queue_context(hw, pf_q);
|
|
if (err) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed to clear LAN Tx queue context on Tx ring %d (pf_q %d), error: %d\n",
|
|
ring->queue_index, pf_q, err);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* set the context in the HMC */
|
|
err = i40e_set_lan_tx_queue_context(hw, pf_q, &tx_ctx);
|
|
if (err) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed to set LAN Tx queue context on Tx ring %d (pf_q %d, error: %d\n",
|
|
ring->queue_index, pf_q, err);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Now associate this queue with this PCI function */
|
|
qtx_ctl = I40E_QTX_CTL_PF_QUEUE;
|
|
qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT) &
|
|
I40E_QTX_CTL_PF_INDX_MASK);
|
|
wr32(hw, I40E_QTX_CTL(pf_q), qtx_ctl);
|
|
i40e_flush(hw);
|
|
|
|
clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
|
|
|
|
/* cache tail off for easier writes later */
|
|
ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_configure_rx_ring - Configure a receive ring context
|
|
* @ring: The Rx ring to configure
|
|
*
|
|
* Configure the Rx descriptor ring in the HMC context.
|
|
**/
|
|
static int i40e_configure_rx_ring(struct i40e_ring *ring)
|
|
{
|
|
struct i40e_vsi *vsi = ring->vsi;
|
|
u32 chain_len = vsi->back->hw.func_caps.rx_buf_chain_len;
|
|
u16 pf_q = vsi->base_queue + ring->queue_index;
|
|
struct i40e_hw *hw = &vsi->back->hw;
|
|
struct i40e_hmc_obj_rxq rx_ctx;
|
|
i40e_status err = 0;
|
|
|
|
ring->state = 0;
|
|
|
|
/* clear the context structure first */
|
|
memset(&rx_ctx, 0, sizeof(rx_ctx));
|
|
|
|
ring->rx_buf_len = vsi->rx_buf_len;
|
|
ring->rx_hdr_len = vsi->rx_hdr_len;
|
|
|
|
rx_ctx.dbuff = ring->rx_buf_len >> I40E_RXQ_CTX_DBUFF_SHIFT;
|
|
rx_ctx.hbuff = ring->rx_hdr_len >> I40E_RXQ_CTX_HBUFF_SHIFT;
|
|
|
|
rx_ctx.base = (ring->dma / 128);
|
|
rx_ctx.qlen = ring->count;
|
|
|
|
if (vsi->back->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED) {
|
|
set_ring_16byte_desc_enabled(ring);
|
|
rx_ctx.dsize = 0;
|
|
} else {
|
|
rx_ctx.dsize = 1;
|
|
}
|
|
|
|
rx_ctx.dtype = vsi->dtype;
|
|
if (vsi->dtype) {
|
|
set_ring_ps_enabled(ring);
|
|
rx_ctx.hsplit_0 = I40E_RX_SPLIT_L2 |
|
|
I40E_RX_SPLIT_IP |
|
|
I40E_RX_SPLIT_TCP_UDP |
|
|
I40E_RX_SPLIT_SCTP;
|
|
} else {
|
|
rx_ctx.hsplit_0 = 0;
|
|
}
|
|
|
|
rx_ctx.rxmax = min_t(u16, vsi->max_frame,
|
|
(chain_len * ring->rx_buf_len));
|
|
rx_ctx.tphrdesc_ena = 1;
|
|
rx_ctx.tphwdesc_ena = 1;
|
|
rx_ctx.tphdata_ena = 1;
|
|
rx_ctx.tphhead_ena = 1;
|
|
if (hw->revision_id == 0)
|
|
rx_ctx.lrxqthresh = 0;
|
|
else
|
|
rx_ctx.lrxqthresh = 2;
|
|
rx_ctx.crcstrip = 1;
|
|
rx_ctx.l2tsel = 1;
|
|
rx_ctx.showiv = 1;
|
|
|
|
/* clear the context in the HMC */
|
|
err = i40e_clear_lan_rx_queue_context(hw, pf_q);
|
|
if (err) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed to clear LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
|
|
ring->queue_index, pf_q, err);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* set the context in the HMC */
|
|
err = i40e_set_lan_rx_queue_context(hw, pf_q, &rx_ctx);
|
|
if (err) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed to set LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
|
|
ring->queue_index, pf_q, err);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* cache tail for quicker writes, and clear the reg before use */
|
|
ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q);
|
|
writel(0, ring->tail);
|
|
|
|
i40e_alloc_rx_buffers(ring, I40E_DESC_UNUSED(ring));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_configure_tx - Configure the VSI for Tx
|
|
* @vsi: VSI structure describing this set of rings and resources
|
|
*
|
|
* Configure the Tx VSI for operation.
|
|
**/
|
|
static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
|
|
{
|
|
int err = 0;
|
|
u16 i;
|
|
|
|
for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
|
|
err = i40e_configure_tx_ring(vsi->tx_rings[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_configure_rx - Configure the VSI for Rx
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* Configure the Rx VSI for operation.
|
|
**/
|
|
static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
|
|
{
|
|
int err = 0;
|
|
u16 i;
|
|
|
|
if (vsi->netdev && (vsi->netdev->mtu > ETH_DATA_LEN))
|
|
vsi->max_frame = vsi->netdev->mtu + ETH_HLEN
|
|
+ ETH_FCS_LEN + VLAN_HLEN;
|
|
else
|
|
vsi->max_frame = I40E_RXBUFFER_2048;
|
|
|
|
/* figure out correct receive buffer length */
|
|
switch (vsi->back->flags & (I40E_FLAG_RX_1BUF_ENABLED |
|
|
I40E_FLAG_RX_PS_ENABLED)) {
|
|
case I40E_FLAG_RX_1BUF_ENABLED:
|
|
vsi->rx_hdr_len = 0;
|
|
vsi->rx_buf_len = vsi->max_frame;
|
|
vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
|
|
break;
|
|
case I40E_FLAG_RX_PS_ENABLED:
|
|
vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
|
|
vsi->rx_buf_len = I40E_RXBUFFER_2048;
|
|
vsi->dtype = I40E_RX_DTYPE_HEADER_SPLIT;
|
|
break;
|
|
default:
|
|
vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
|
|
vsi->rx_buf_len = I40E_RXBUFFER_2048;
|
|
vsi->dtype = I40E_RX_DTYPE_SPLIT_ALWAYS;
|
|
break;
|
|
}
|
|
|
|
/* round up for the chip's needs */
|
|
vsi->rx_hdr_len = ALIGN(vsi->rx_hdr_len,
|
|
(1 << I40E_RXQ_CTX_HBUFF_SHIFT));
|
|
vsi->rx_buf_len = ALIGN(vsi->rx_buf_len,
|
|
(1 << I40E_RXQ_CTX_DBUFF_SHIFT));
|
|
|
|
/* set up individual rings */
|
|
for (i = 0; i < vsi->num_queue_pairs && !err; i++)
|
|
err = i40e_configure_rx_ring(vsi->rx_rings[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_config_dcb_rings - Update rings to reflect DCB TC
|
|
* @vsi: ptr to the VSI
|
|
**/
|
|
static void i40e_vsi_config_dcb_rings(struct i40e_vsi *vsi)
|
|
{
|
|
u16 qoffset, qcount;
|
|
int i, n;
|
|
|
|
if (!(vsi->back->flags & I40E_FLAG_DCB_ENABLED))
|
|
return;
|
|
|
|
for (n = 0; n < I40E_MAX_TRAFFIC_CLASS; n++) {
|
|
if (!(vsi->tc_config.enabled_tc & (1 << n)))
|
|
continue;
|
|
|
|
qoffset = vsi->tc_config.tc_info[n].qoffset;
|
|
qcount = vsi->tc_config.tc_info[n].qcount;
|
|
for (i = qoffset; i < (qoffset + qcount); i++) {
|
|
struct i40e_ring *rx_ring = vsi->rx_rings[i];
|
|
struct i40e_ring *tx_ring = vsi->tx_rings[i];
|
|
rx_ring->dcb_tc = n;
|
|
tx_ring->dcb_tc = n;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_set_vsi_rx_mode - Call set_rx_mode on a VSI
|
|
* @vsi: ptr to the VSI
|
|
**/
|
|
static void i40e_set_vsi_rx_mode(struct i40e_vsi *vsi)
|
|
{
|
|
if (vsi->netdev)
|
|
i40e_set_rx_mode(vsi->netdev);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_configure - Set up the VSI for action
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static int i40e_vsi_configure(struct i40e_vsi *vsi)
|
|
{
|
|
int err;
|
|
|
|
i40e_set_vsi_rx_mode(vsi);
|
|
i40e_restore_vlan(vsi);
|
|
i40e_vsi_config_dcb_rings(vsi);
|
|
err = i40e_vsi_configure_tx(vsi);
|
|
if (!err)
|
|
err = i40e_vsi_configure_rx(vsi);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_configure_msix - MSIX mode Interrupt Config in the HW
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_q_vector *q_vector;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u16 vector;
|
|
int i, q;
|
|
u32 val;
|
|
u32 qp;
|
|
|
|
/* The interrupt indexing is offset by 1 in the PFINT_ITRn
|
|
* and PFINT_LNKLSTn registers, e.g.:
|
|
* PFINT_ITRn[0..n-1] gets msix-1..msix-n (qpair interrupts)
|
|
*/
|
|
qp = vsi->base_queue;
|
|
vector = vsi->base_vector;
|
|
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
|
|
q_vector = vsi->q_vectors[i];
|
|
q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
|
|
q_vector->rx.latency_range = I40E_LOW_LATENCY;
|
|
wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
|
|
q_vector->rx.itr);
|
|
q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
|
|
q_vector->tx.latency_range = I40E_LOW_LATENCY;
|
|
wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
|
|
q_vector->tx.itr);
|
|
|
|
/* Linked list for the queuepairs assigned to this vector */
|
|
wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), qp);
|
|
for (q = 0; q < q_vector->num_ringpairs; q++) {
|
|
val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
|
|
(I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
|
|
(vector << I40E_QINT_RQCTL_MSIX_INDX_SHIFT) |
|
|
(qp << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT)|
|
|
(I40E_QUEUE_TYPE_TX
|
|
<< I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT);
|
|
|
|
wr32(hw, I40E_QINT_RQCTL(qp), val);
|
|
|
|
val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
|
|
(I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
|
|
(vector << I40E_QINT_TQCTL_MSIX_INDX_SHIFT) |
|
|
((qp+1) << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT)|
|
|
(I40E_QUEUE_TYPE_RX
|
|
<< I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
|
|
|
|
/* Terminate the linked list */
|
|
if (q == (q_vector->num_ringpairs - 1))
|
|
val |= (I40E_QUEUE_END_OF_LIST
|
|
<< I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
|
|
|
|
wr32(hw, I40E_QINT_TQCTL(qp), val);
|
|
qp++;
|
|
}
|
|
}
|
|
|
|
i40e_flush(hw);
|
|
}
|
|
|
|
/**
|
|
* i40e_enable_misc_int_causes - enable the non-queue interrupts
|
|
* @hw: ptr to the hardware info
|
|
**/
|
|
static void i40e_enable_misc_int_causes(struct i40e_hw *hw)
|
|
{
|
|
u32 val;
|
|
|
|
/* clear things first */
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, 0); /* disable all */
|
|
rd32(hw, I40E_PFINT_ICR0); /* read to clear */
|
|
|
|
val = I40E_PFINT_ICR0_ENA_ECC_ERR_MASK |
|
|
I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK |
|
|
I40E_PFINT_ICR0_ENA_GRST_MASK |
|
|
I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK |
|
|
I40E_PFINT_ICR0_ENA_GPIO_MASK |
|
|
I40E_PFINT_ICR0_ENA_STORM_DETECT_MASK |
|
|
I40E_PFINT_ICR0_ENA_HMC_ERR_MASK |
|
|
I40E_PFINT_ICR0_ENA_VFLR_MASK |
|
|
I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
|
|
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, val);
|
|
|
|
/* SW_ITR_IDX = 0, but don't change INTENA */
|
|
wr32(hw, I40E_PFINT_DYN_CTL0, I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK |
|
|
I40E_PFINT_DYN_CTL0_INTENA_MSK_MASK);
|
|
|
|
/* OTHER_ITR_IDX = 0 */
|
|
wr32(hw, I40E_PFINT_STAT_CTL0, 0);
|
|
}
|
|
|
|
/**
|
|
* i40e_configure_msi_and_legacy - Legacy mode interrupt config in the HW
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_q_vector *q_vector = vsi->q_vectors[0];
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 val;
|
|
|
|
/* set the ITR configuration */
|
|
q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
|
|
q_vector->rx.latency_range = I40E_LOW_LATENCY;
|
|
wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
|
|
q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
|
|
q_vector->tx.latency_range = I40E_LOW_LATENCY;
|
|
wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
|
|
|
|
i40e_enable_misc_int_causes(hw);
|
|
|
|
/* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
|
|
wr32(hw, I40E_PFINT_LNKLST0, 0);
|
|
|
|
/* Associate the queue pair to the vector and enable the q int */
|
|
val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
|
|
(I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
|
|
(I40E_QUEUE_TYPE_TX << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
|
|
|
|
wr32(hw, I40E_QINT_RQCTL(0), val);
|
|
|
|
val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
|
|
(I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
|
|
(I40E_QUEUE_END_OF_LIST << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
|
|
|
|
wr32(hw, I40E_QINT_TQCTL(0), val);
|
|
i40e_flush(hw);
|
|
}
|
|
|
|
/**
|
|
* i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
|
|
* @pf: board private structure
|
|
**/
|
|
void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 val;
|
|
|
|
val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
|
|
I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
|
|
(I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT);
|
|
|
|
wr32(hw, I40E_PFINT_DYN_CTL0, val);
|
|
i40e_flush(hw);
|
|
}
|
|
|
|
/**
|
|
* i40e_irq_dynamic_enable - Enable default interrupt generation settings
|
|
* @vsi: pointer to a vsi
|
|
* @vector: enable a particular Hw Interrupt vector
|
|
**/
|
|
void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 val;
|
|
|
|
val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
|
|
I40E_PFINT_DYN_CTLN_CLEARPBA_MASK |
|
|
(I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
|
|
wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
|
|
/* skip the flush */
|
|
}
|
|
|
|
/**
|
|
* i40e_msix_clean_rings - MSIX mode Interrupt Handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a q_vector
|
|
**/
|
|
static irqreturn_t i40e_msix_clean_rings(int irq, void *data)
|
|
{
|
|
struct i40e_q_vector *q_vector = data;
|
|
|
|
if (!q_vector->tx.ring && !q_vector->rx.ring)
|
|
return IRQ_HANDLED;
|
|
|
|
napi_schedule(&q_vector->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* i40e_fdir_clean_rings - Interrupt Handler for FDIR rings
|
|
* @irq: interrupt number
|
|
* @data: pointer to a q_vector
|
|
**/
|
|
static irqreturn_t i40e_fdir_clean_rings(int irq, void *data)
|
|
{
|
|
struct i40e_q_vector *q_vector = data;
|
|
|
|
if (!q_vector->tx.ring && !q_vector->rx.ring)
|
|
return IRQ_HANDLED;
|
|
|
|
pr_info("fdir ring cleaning needed\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_request_irq_msix - Initialize MSI-X interrupts
|
|
* @vsi: the VSI being configured
|
|
* @basename: name for the vector
|
|
*
|
|
* Allocates MSI-X vectors and requests interrupts from the kernel.
|
|
**/
|
|
static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
|
|
{
|
|
int q_vectors = vsi->num_q_vectors;
|
|
struct i40e_pf *pf = vsi->back;
|
|
int base = vsi->base_vector;
|
|
int rx_int_idx = 0;
|
|
int tx_int_idx = 0;
|
|
int vector, err;
|
|
|
|
for (vector = 0; vector < q_vectors; vector++) {
|
|
struct i40e_q_vector *q_vector = vsi->q_vectors[vector];
|
|
|
|
if (q_vector->tx.ring && q_vector->rx.ring) {
|
|
snprintf(q_vector->name, sizeof(q_vector->name) - 1,
|
|
"%s-%s-%d", basename, "TxRx", rx_int_idx++);
|
|
tx_int_idx++;
|
|
} else if (q_vector->rx.ring) {
|
|
snprintf(q_vector->name, sizeof(q_vector->name) - 1,
|
|
"%s-%s-%d", basename, "rx", rx_int_idx++);
|
|
} else if (q_vector->tx.ring) {
|
|
snprintf(q_vector->name, sizeof(q_vector->name) - 1,
|
|
"%s-%s-%d", basename, "tx", tx_int_idx++);
|
|
} else {
|
|
/* skip this unused q_vector */
|
|
continue;
|
|
}
|
|
err = request_irq(pf->msix_entries[base + vector].vector,
|
|
vsi->irq_handler,
|
|
0,
|
|
q_vector->name,
|
|
q_vector);
|
|
if (err) {
|
|
dev_info(&pf->pdev->dev,
|
|
"%s: request_irq failed, error: %d\n",
|
|
__func__, err);
|
|
goto free_queue_irqs;
|
|
}
|
|
/* assign the mask for this irq */
|
|
irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
|
|
&q_vector->affinity_mask);
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_queue_irqs:
|
|
while (vector) {
|
|
vector--;
|
|
irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
|
|
NULL);
|
|
free_irq(pf->msix_entries[base + vector].vector,
|
|
&(vsi->q_vectors[vector]));
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_disable_irq - Mask off queue interrupt generation on the VSI
|
|
* @vsi: the VSI being un-configured
|
|
**/
|
|
static void i40e_vsi_disable_irq(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int base = vsi->base_vector;
|
|
int i;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
wr32(hw, I40E_QINT_TQCTL(vsi->tx_rings[i]->reg_idx), 0);
|
|
wr32(hw, I40E_QINT_RQCTL(vsi->rx_rings[i]->reg_idx), 0);
|
|
}
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
for (i = vsi->base_vector;
|
|
i < (vsi->num_q_vectors + vsi->base_vector); i++)
|
|
wr32(hw, I40E_PFINT_DYN_CTLN(i - 1), 0);
|
|
|
|
i40e_flush(hw);
|
|
for (i = 0; i < vsi->num_q_vectors; i++)
|
|
synchronize_irq(pf->msix_entries[i + base].vector);
|
|
} else {
|
|
/* Legacy and MSI mode - this stops all interrupt handling */
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, 0);
|
|
wr32(hw, I40E_PFINT_DYN_CTL0, 0);
|
|
i40e_flush(hw);
|
|
synchronize_irq(pf->pdev->irq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_enable_irq - Enable IRQ for the given VSI
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static int i40e_vsi_enable_irq(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
int i;
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
for (i = vsi->base_vector;
|
|
i < (vsi->num_q_vectors + vsi->base_vector); i++)
|
|
i40e_irq_dynamic_enable(vsi, i);
|
|
} else {
|
|
i40e_irq_dynamic_enable_icr0(pf);
|
|
}
|
|
|
|
i40e_flush(&pf->hw);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_stop_misc_vector - Stop the vector that handles non-queue events
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_stop_misc_vector(struct i40e_pf *pf)
|
|
{
|
|
/* Disable ICR 0 */
|
|
wr32(&pf->hw, I40E_PFINT_ICR0_ENA, 0);
|
|
i40e_flush(&pf->hw);
|
|
}
|
|
|
|
/**
|
|
* i40e_intr - MSI/Legacy and non-queue interrupt handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a q_vector
|
|
*
|
|
* This is the handler used for all MSI/Legacy interrupts, and deals
|
|
* with both queue and non-queue interrupts. This is also used in
|
|
* MSIX mode to handle the non-queue interrupts.
|
|
**/
|
|
static irqreturn_t i40e_intr(int irq, void *data)
|
|
{
|
|
struct i40e_pf *pf = (struct i40e_pf *)data;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 icr0, icr0_remaining;
|
|
u32 val, ena_mask;
|
|
|
|
icr0 = rd32(hw, I40E_PFINT_ICR0);
|
|
|
|
val = rd32(hw, I40E_PFINT_DYN_CTL0);
|
|
val = val | I40E_PFINT_DYN_CTL0_CLEARPBA_MASK;
|
|
wr32(hw, I40E_PFINT_DYN_CTL0, val);
|
|
|
|
/* if sharing a legacy IRQ, we might get called w/o an intr pending */
|
|
if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
|
|
return IRQ_NONE;
|
|
|
|
ena_mask = rd32(hw, I40E_PFINT_ICR0_ENA);
|
|
|
|
/* if interrupt but no bits showing, must be SWINT */
|
|
if (((icr0 & ~I40E_PFINT_ICR0_INTEVENT_MASK) == 0) ||
|
|
(icr0 & I40E_PFINT_ICR0_SWINT_MASK))
|
|
pf->sw_int_count++;
|
|
|
|
/* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
|
|
if (icr0 & I40E_PFINT_ICR0_QUEUE_0_MASK) {
|
|
|
|
/* temporarily disable queue cause for NAPI processing */
|
|
u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
|
|
qval &= ~I40E_QINT_RQCTL_CAUSE_ENA_MASK;
|
|
wr32(hw, I40E_QINT_RQCTL(0), qval);
|
|
|
|
qval = rd32(hw, I40E_QINT_TQCTL(0));
|
|
qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
|
|
wr32(hw, I40E_QINT_TQCTL(0), qval);
|
|
|
|
if (!test_bit(__I40E_DOWN, &pf->state))
|
|
napi_schedule(&pf->vsi[pf->lan_vsi]->q_vectors[0]->napi);
|
|
}
|
|
|
|
if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
|
|
ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
|
|
set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
|
|
}
|
|
|
|
if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) {
|
|
ena_mask &= ~I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
|
|
set_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
|
|
}
|
|
|
|
if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) {
|
|
ena_mask &= ~I40E_PFINT_ICR0_ENA_VFLR_MASK;
|
|
set_bit(__I40E_VFLR_EVENT_PENDING, &pf->state);
|
|
}
|
|
|
|
if (icr0 & I40E_PFINT_ICR0_GRST_MASK) {
|
|
if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
|
|
set_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
|
|
ena_mask &= ~I40E_PFINT_ICR0_ENA_GRST_MASK;
|
|
val = rd32(hw, I40E_GLGEN_RSTAT);
|
|
val = (val & I40E_GLGEN_RSTAT_RESET_TYPE_MASK)
|
|
>> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT;
|
|
if (val == I40E_RESET_CORER)
|
|
pf->corer_count++;
|
|
else if (val == I40E_RESET_GLOBR)
|
|
pf->globr_count++;
|
|
else if (val == I40E_RESET_EMPR)
|
|
pf->empr_count++;
|
|
}
|
|
|
|
if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) {
|
|
icr0 &= ~I40E_PFINT_ICR0_HMC_ERR_MASK;
|
|
dev_info(&pf->pdev->dev, "HMC error interrupt\n");
|
|
}
|
|
|
|
/* If a critical error is pending we have no choice but to reset the
|
|
* device.
|
|
* Report and mask out any remaining unexpected interrupts.
|
|
*/
|
|
icr0_remaining = icr0 & ena_mask;
|
|
if (icr0_remaining) {
|
|
dev_info(&pf->pdev->dev, "unhandled interrupt icr0=0x%08x\n",
|
|
icr0_remaining);
|
|
if ((icr0_remaining & I40E_PFINT_ICR0_PE_CRITERR_MASK) ||
|
|
(icr0_remaining & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) ||
|
|
(icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK) ||
|
|
(icr0_remaining & I40E_PFINT_ICR0_MAL_DETECT_MASK)) {
|
|
dev_info(&pf->pdev->dev, "device will be reset\n");
|
|
set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
|
|
i40e_service_event_schedule(pf);
|
|
}
|
|
ena_mask &= ~icr0_remaining;
|
|
}
|
|
|
|
/* re-enable interrupt causes */
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
|
|
if (!test_bit(__I40E_DOWN, &pf->state)) {
|
|
i40e_service_event_schedule(pf);
|
|
i40e_irq_dynamic_enable_icr0(pf);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* i40e_map_vector_to_qp - Assigns the queue pair to the vector
|
|
* @vsi: the VSI being configured
|
|
* @v_idx: vector index
|
|
* @qp_idx: queue pair index
|
|
**/
|
|
static void map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
|
|
{
|
|
struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
|
|
struct i40e_ring *tx_ring = vsi->tx_rings[qp_idx];
|
|
struct i40e_ring *rx_ring = vsi->rx_rings[qp_idx];
|
|
|
|
tx_ring->q_vector = q_vector;
|
|
tx_ring->next = q_vector->tx.ring;
|
|
q_vector->tx.ring = tx_ring;
|
|
q_vector->tx.count++;
|
|
|
|
rx_ring->q_vector = q_vector;
|
|
rx_ring->next = q_vector->rx.ring;
|
|
q_vector->rx.ring = rx_ring;
|
|
q_vector->rx.count++;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_map_rings_to_vectors - Maps descriptor rings to vectors
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* This function maps descriptor rings to the queue-specific vectors
|
|
* we were allotted through the MSI-X enabling code. Ideally, we'd have
|
|
* one vector per queue pair, but on a constrained vector budget, we
|
|
* group the queue pairs as "efficiently" as possible.
|
|
**/
|
|
static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi *vsi)
|
|
{
|
|
int qp_remaining = vsi->num_queue_pairs;
|
|
int q_vectors = vsi->num_q_vectors;
|
|
int num_ringpairs;
|
|
int v_start = 0;
|
|
int qp_idx = 0;
|
|
|
|
/* If we don't have enough vectors for a 1-to-1 mapping, we'll have to
|
|
* group them so there are multiple queues per vector.
|
|
*/
|
|
for (; v_start < q_vectors && qp_remaining; v_start++) {
|
|
struct i40e_q_vector *q_vector = vsi->q_vectors[v_start];
|
|
|
|
num_ringpairs = DIV_ROUND_UP(qp_remaining, q_vectors - v_start);
|
|
|
|
q_vector->num_ringpairs = num_ringpairs;
|
|
|
|
q_vector->rx.count = 0;
|
|
q_vector->tx.count = 0;
|
|
q_vector->rx.ring = NULL;
|
|
q_vector->tx.ring = NULL;
|
|
|
|
while (num_ringpairs--) {
|
|
map_vector_to_qp(vsi, v_start, qp_idx);
|
|
qp_idx++;
|
|
qp_remaining--;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_request_irq - Request IRQ from the OS
|
|
* @vsi: the VSI being configured
|
|
* @basename: name for the vector
|
|
**/
|
|
static int i40e_vsi_request_irq(struct i40e_vsi *vsi, char *basename)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
int err;
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
|
|
err = i40e_vsi_request_irq_msix(vsi, basename);
|
|
else if (pf->flags & I40E_FLAG_MSI_ENABLED)
|
|
err = request_irq(pf->pdev->irq, i40e_intr, 0,
|
|
pf->misc_int_name, pf);
|
|
else
|
|
err = request_irq(pf->pdev->irq, i40e_intr, IRQF_SHARED,
|
|
pf->misc_int_name, pf);
|
|
|
|
if (err)
|
|
dev_info(&pf->pdev->dev, "request_irq failed, Error %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* i40e_netpoll - A Polling 'interrupt'handler
|
|
* @netdev: network interface device structure
|
|
*
|
|
* This is used by netconsole to send skbs without having to re-enable
|
|
* interrupts. It's not called while the normal interrupt routine is executing.
|
|
**/
|
|
static void i40e_netpoll(struct net_device *netdev)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
int i;
|
|
|
|
/* if interface is down do nothing */
|
|
if (test_bit(__I40E_DOWN, &vsi->state))
|
|
return;
|
|
|
|
pf->flags |= I40E_FLAG_IN_NETPOLL;
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
for (i = 0; i < vsi->num_q_vectors; i++)
|
|
i40e_msix_clean_rings(0, vsi->q_vectors[i]);
|
|
} else {
|
|
i40e_intr(pf->pdev->irq, netdev);
|
|
}
|
|
pf->flags &= ~I40E_FLAG_IN_NETPOLL;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* i40e_vsi_control_tx - Start or stop a VSI's rings
|
|
* @vsi: the VSI being configured
|
|
* @enable: start or stop the rings
|
|
**/
|
|
static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int i, j, pf_q;
|
|
u32 tx_reg;
|
|
|
|
pf_q = vsi->base_queue;
|
|
for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
|
|
j = 1000;
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
|
|
} while (j-- && ((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT)
|
|
^ (tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT)) & 1);
|
|
|
|
if (enable) {
|
|
/* is STAT set ? */
|
|
if ((tx_reg & I40E_QTX_ENA_QENA_STAT_MASK)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Tx %d already enabled\n", i);
|
|
continue;
|
|
}
|
|
} else {
|
|
/* is !STAT set ? */
|
|
if (!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Tx %d already disabled\n", i);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* turn on/off the queue */
|
|
if (enable)
|
|
tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK |
|
|
I40E_QTX_ENA_QENA_STAT_MASK;
|
|
else
|
|
tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
|
|
|
|
wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
|
|
|
|
/* wait for the change to finish */
|
|
for (j = 0; j < 10; j++) {
|
|
tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
|
|
if (enable) {
|
|
if ((tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
|
|
break;
|
|
} else {
|
|
if (!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
|
|
break;
|
|
}
|
|
|
|
udelay(10);
|
|
}
|
|
if (j >= 10) {
|
|
dev_info(&pf->pdev->dev, "Tx ring %d %sable timeout\n",
|
|
pf_q, (enable ? "en" : "dis"));
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
if (hw->revision_id == 0)
|
|
mdelay(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_control_rx - Start or stop a VSI's rings
|
|
* @vsi: the VSI being configured
|
|
* @enable: start or stop the rings
|
|
**/
|
|
static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int i, j, pf_q;
|
|
u32 rx_reg;
|
|
|
|
pf_q = vsi->base_queue;
|
|
for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
|
|
j = 1000;
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
|
|
} while (j-- && ((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT)
|
|
^ (rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT)) & 1);
|
|
|
|
if (enable) {
|
|
/* is STAT set ? */
|
|
if ((rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
|
|
continue;
|
|
} else {
|
|
/* is !STAT set ? */
|
|
if (!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
|
|
continue;
|
|
}
|
|
|
|
/* turn on/off the queue */
|
|
if (enable)
|
|
rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK |
|
|
I40E_QRX_ENA_QENA_STAT_MASK;
|
|
else
|
|
rx_reg &= ~(I40E_QRX_ENA_QENA_REQ_MASK |
|
|
I40E_QRX_ENA_QENA_STAT_MASK);
|
|
wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
|
|
|
|
/* wait for the change to finish */
|
|
for (j = 0; j < 10; j++) {
|
|
rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
|
|
|
|
if (enable) {
|
|
if ((rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
|
|
break;
|
|
} else {
|
|
if (!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
|
|
break;
|
|
}
|
|
|
|
udelay(10);
|
|
}
|
|
if (j >= 10) {
|
|
dev_info(&pf->pdev->dev, "Rx ring %d %sable timeout\n",
|
|
pf_q, (enable ? "en" : "dis"));
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_control_rings - Start or stop a VSI's rings
|
|
* @vsi: the VSI being configured
|
|
* @enable: start or stop the rings
|
|
**/
|
|
int i40e_vsi_control_rings(struct i40e_vsi *vsi, bool request)
|
|
{
|
|
int ret;
|
|
|
|
/* do rx first for enable and last for disable */
|
|
if (request) {
|
|
ret = i40e_vsi_control_rx(vsi, request);
|
|
if (ret)
|
|
return ret;
|
|
ret = i40e_vsi_control_tx(vsi, request);
|
|
} else {
|
|
ret = i40e_vsi_control_tx(vsi, request);
|
|
if (ret)
|
|
return ret;
|
|
ret = i40e_vsi_control_rx(vsi, request);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_free_irq - Free the irq association with the OS
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int base = vsi->base_vector;
|
|
u32 val, qp;
|
|
int i;
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
if (!vsi->q_vectors)
|
|
return;
|
|
|
|
for (i = 0; i < vsi->num_q_vectors; i++) {
|
|
u16 vector = i + base;
|
|
|
|
/* free only the irqs that were actually requested */
|
|
if (vsi->q_vectors[i]->num_ringpairs == 0)
|
|
continue;
|
|
|
|
/* clear the affinity_mask in the IRQ descriptor */
|
|
irq_set_affinity_hint(pf->msix_entries[vector].vector,
|
|
NULL);
|
|
free_irq(pf->msix_entries[vector].vector,
|
|
vsi->q_vectors[i]);
|
|
|
|
/* Tear down the interrupt queue link list
|
|
*
|
|
* We know that they come in pairs and always
|
|
* the Rx first, then the Tx. To clear the
|
|
* link list, stick the EOL value into the
|
|
* next_q field of the registers.
|
|
*/
|
|
val = rd32(hw, I40E_PFINT_LNKLSTN(vector - 1));
|
|
qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
|
|
>> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
|
|
val |= I40E_QUEUE_END_OF_LIST
|
|
<< I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
|
|
wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), val);
|
|
|
|
while (qp != I40E_QUEUE_END_OF_LIST) {
|
|
u32 next;
|
|
|
|
val = rd32(hw, I40E_QINT_RQCTL(qp));
|
|
|
|
val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
|
|
I40E_QINT_RQCTL_MSIX0_INDX_MASK |
|
|
I40E_QINT_RQCTL_CAUSE_ENA_MASK |
|
|
I40E_QINT_RQCTL_INTEVENT_MASK);
|
|
|
|
val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
|
|
I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
|
|
|
|
wr32(hw, I40E_QINT_RQCTL(qp), val);
|
|
|
|
val = rd32(hw, I40E_QINT_TQCTL(qp));
|
|
|
|
next = (val & I40E_QINT_TQCTL_NEXTQ_INDX_MASK)
|
|
>> I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT;
|
|
|
|
val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
|
|
I40E_QINT_TQCTL_MSIX0_INDX_MASK |
|
|
I40E_QINT_TQCTL_CAUSE_ENA_MASK |
|
|
I40E_QINT_TQCTL_INTEVENT_MASK);
|
|
|
|
val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
|
|
I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
|
|
|
|
wr32(hw, I40E_QINT_TQCTL(qp), val);
|
|
qp = next;
|
|
}
|
|
}
|
|
} else {
|
|
free_irq(pf->pdev->irq, pf);
|
|
|
|
val = rd32(hw, I40E_PFINT_LNKLST0);
|
|
qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
|
|
>> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
|
|
val |= I40E_QUEUE_END_OF_LIST
|
|
<< I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT;
|
|
wr32(hw, I40E_PFINT_LNKLST0, val);
|
|
|
|
val = rd32(hw, I40E_QINT_RQCTL(qp));
|
|
val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
|
|
I40E_QINT_RQCTL_MSIX0_INDX_MASK |
|
|
I40E_QINT_RQCTL_CAUSE_ENA_MASK |
|
|
I40E_QINT_RQCTL_INTEVENT_MASK);
|
|
|
|
val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
|
|
I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
|
|
|
|
wr32(hw, I40E_QINT_RQCTL(qp), val);
|
|
|
|
val = rd32(hw, I40E_QINT_TQCTL(qp));
|
|
|
|
val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
|
|
I40E_QINT_TQCTL_MSIX0_INDX_MASK |
|
|
I40E_QINT_TQCTL_CAUSE_ENA_MASK |
|
|
I40E_QINT_TQCTL_INTEVENT_MASK);
|
|
|
|
val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
|
|
I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
|
|
|
|
wr32(hw, I40E_QINT_TQCTL(qp), val);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_free_q_vector - Free memory allocated for specific interrupt vector
|
|
* @vsi: the VSI being configured
|
|
* @v_idx: Index of vector to be freed
|
|
*
|
|
* This function frees the memory allocated to the q_vector. In addition if
|
|
* NAPI is enabled it will delete any references to the NAPI struct prior
|
|
* to freeing the q_vector.
|
|
**/
|
|
static void i40e_free_q_vector(struct i40e_vsi *vsi, int v_idx)
|
|
{
|
|
struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
|
|
struct i40e_ring *ring;
|
|
|
|
if (!q_vector)
|
|
return;
|
|
|
|
/* disassociate q_vector from rings */
|
|
i40e_for_each_ring(ring, q_vector->tx)
|
|
ring->q_vector = NULL;
|
|
|
|
i40e_for_each_ring(ring, q_vector->rx)
|
|
ring->q_vector = NULL;
|
|
|
|
/* only VSI w/ an associated netdev is set up w/ NAPI */
|
|
if (vsi->netdev)
|
|
netif_napi_del(&q_vector->napi);
|
|
|
|
vsi->q_vectors[v_idx] = NULL;
|
|
|
|
kfree_rcu(q_vector, rcu);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_free_q_vectors - Free memory allocated for interrupt vectors
|
|
* @vsi: the VSI being un-configured
|
|
*
|
|
* This frees the memory allocated to the q_vectors and
|
|
* deletes references to the NAPI struct.
|
|
**/
|
|
static void i40e_vsi_free_q_vectors(struct i40e_vsi *vsi)
|
|
{
|
|
int v_idx;
|
|
|
|
for (v_idx = 0; v_idx < vsi->num_q_vectors; v_idx++)
|
|
i40e_free_q_vector(vsi, v_idx);
|
|
}
|
|
|
|
/**
|
|
* i40e_reset_interrupt_capability - Disable interrupt setup in OS
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_reset_interrupt_capability(struct i40e_pf *pf)
|
|
{
|
|
/* If we're in Legacy mode, the interrupt was cleaned in vsi_close */
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
pci_disable_msix(pf->pdev);
|
|
kfree(pf->msix_entries);
|
|
pf->msix_entries = NULL;
|
|
} else if (pf->flags & I40E_FLAG_MSI_ENABLED) {
|
|
pci_disable_msi(pf->pdev);
|
|
}
|
|
pf->flags &= ~(I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED);
|
|
}
|
|
|
|
/**
|
|
* i40e_clear_interrupt_scheme - Clear the current interrupt scheme settings
|
|
* @pf: board private structure
|
|
*
|
|
* We go through and clear interrupt specific resources and reset the structure
|
|
* to pre-load conditions
|
|
**/
|
|
static void i40e_clear_interrupt_scheme(struct i40e_pf *pf)
|
|
{
|
|
int i;
|
|
|
|
i40e_put_lump(pf->irq_pile, 0, I40E_PILE_VALID_BIT-1);
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
|
|
if (pf->vsi[i])
|
|
i40e_vsi_free_q_vectors(pf->vsi[i]);
|
|
i40e_reset_interrupt_capability(pf);
|
|
}
|
|
|
|
/**
|
|
* i40e_napi_enable_all - Enable NAPI for all q_vectors in the VSI
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static void i40e_napi_enable_all(struct i40e_vsi *vsi)
|
|
{
|
|
int q_idx;
|
|
|
|
if (!vsi->netdev)
|
|
return;
|
|
|
|
for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
|
|
napi_enable(&vsi->q_vectors[q_idx]->napi);
|
|
}
|
|
|
|
/**
|
|
* i40e_napi_disable_all - Disable NAPI for all q_vectors in the VSI
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static void i40e_napi_disable_all(struct i40e_vsi *vsi)
|
|
{
|
|
int q_idx;
|
|
|
|
if (!vsi->netdev)
|
|
return;
|
|
|
|
for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
|
|
napi_disable(&vsi->q_vectors[q_idx]->napi);
|
|
}
|
|
|
|
/**
|
|
* i40e_quiesce_vsi - Pause a given VSI
|
|
* @vsi: the VSI being paused
|
|
**/
|
|
static void i40e_quiesce_vsi(struct i40e_vsi *vsi)
|
|
{
|
|
if (test_bit(__I40E_DOWN, &vsi->state))
|
|
return;
|
|
|
|
set_bit(__I40E_NEEDS_RESTART, &vsi->state);
|
|
if (vsi->netdev && netif_running(vsi->netdev)) {
|
|
vsi->netdev->netdev_ops->ndo_stop(vsi->netdev);
|
|
} else {
|
|
set_bit(__I40E_DOWN, &vsi->state);
|
|
i40e_down(vsi);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_unquiesce_vsi - Resume a given VSI
|
|
* @vsi: the VSI being resumed
|
|
**/
|
|
static void i40e_unquiesce_vsi(struct i40e_vsi *vsi)
|
|
{
|
|
if (!test_bit(__I40E_NEEDS_RESTART, &vsi->state))
|
|
return;
|
|
|
|
clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
|
|
if (vsi->netdev && netif_running(vsi->netdev))
|
|
vsi->netdev->netdev_ops->ndo_open(vsi->netdev);
|
|
else
|
|
i40e_up(vsi); /* this clears the DOWN bit */
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_quiesce_all_vsi - Pause all VSIs on a PF
|
|
* @pf: the PF
|
|
**/
|
|
static void i40e_pf_quiesce_all_vsi(struct i40e_pf *pf)
|
|
{
|
|
int v;
|
|
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
if (pf->vsi[v])
|
|
i40e_quiesce_vsi(pf->vsi[v]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_unquiesce_all_vsi - Resume all VSIs on a PF
|
|
* @pf: the PF
|
|
**/
|
|
static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
|
|
{
|
|
int v;
|
|
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
if (pf->vsi[v])
|
|
i40e_unquiesce_vsi(pf->vsi[v]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_dcb_get_num_tc - Get the number of TCs from DCBx config
|
|
* @dcbcfg: the corresponding DCBx configuration structure
|
|
*
|
|
* Return the number of TCs from given DCBx configuration
|
|
**/
|
|
static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
|
|
{
|
|
u8 num_tc = 0;
|
|
int i;
|
|
|
|
/* Scan the ETS Config Priority Table to find
|
|
* traffic class enabled for a given priority
|
|
* and use the traffic class index to get the
|
|
* number of traffic classes enabled
|
|
*/
|
|
for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
|
|
if (dcbcfg->etscfg.prioritytable[i] > num_tc)
|
|
num_tc = dcbcfg->etscfg.prioritytable[i];
|
|
}
|
|
|
|
/* Traffic class index starts from zero so
|
|
* increment to return the actual count
|
|
*/
|
|
return num_tc + 1;
|
|
}
|
|
|
|
/**
|
|
* i40e_dcb_get_enabled_tc - Get enabled traffic classes
|
|
* @dcbcfg: the corresponding DCBx configuration structure
|
|
*
|
|
* Query the current DCB configuration and return the number of
|
|
* traffic classes enabled from the given DCBX config
|
|
**/
|
|
static u8 i40e_dcb_get_enabled_tc(struct i40e_dcbx_config *dcbcfg)
|
|
{
|
|
u8 num_tc = i40e_dcb_get_num_tc(dcbcfg);
|
|
u8 enabled_tc = 1;
|
|
u8 i;
|
|
|
|
for (i = 0; i < num_tc; i++)
|
|
enabled_tc |= 1 << i;
|
|
|
|
return enabled_tc;
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_get_num_tc - Get enabled traffic classes for PF
|
|
* @pf: PF being queried
|
|
*
|
|
* Return number of traffic classes enabled for the given PF
|
|
**/
|
|
static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u8 i, enabled_tc;
|
|
u8 num_tc = 0;
|
|
struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
|
|
|
|
/* If DCB is not enabled then always in single TC */
|
|
if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
|
|
return 1;
|
|
|
|
/* MFP mode return count of enabled TCs for this PF */
|
|
if (pf->flags & I40E_FLAG_MFP_ENABLED) {
|
|
enabled_tc = pf->hw.func_caps.enabled_tcmap;
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
if (enabled_tc & (1 << i))
|
|
num_tc++;
|
|
}
|
|
return num_tc;
|
|
}
|
|
|
|
/* SFP mode will be enabled for all TCs on port */
|
|
return i40e_dcb_get_num_tc(dcbcfg);
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_get_default_tc - Get bitmap for first enabled TC
|
|
* @pf: PF being queried
|
|
*
|
|
* Return a bitmap for first enabled traffic class for this PF.
|
|
**/
|
|
static u8 i40e_pf_get_default_tc(struct i40e_pf *pf)
|
|
{
|
|
u8 enabled_tc = pf->hw.func_caps.enabled_tcmap;
|
|
u8 i = 0;
|
|
|
|
if (!enabled_tc)
|
|
return 0x1; /* TC0 */
|
|
|
|
/* Find the first enabled TC */
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
if (enabled_tc & (1 << i))
|
|
break;
|
|
}
|
|
|
|
return 1 << i;
|
|
}
|
|
|
|
/**
|
|
* i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
|
|
* @pf: PF being queried
|
|
*
|
|
* Return a bitmap for enabled traffic classes for this PF.
|
|
**/
|
|
static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
|
|
{
|
|
/* If DCB is not enabled for this PF then just return default TC */
|
|
if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
|
|
return i40e_pf_get_default_tc(pf);
|
|
|
|
/* MFP mode will have enabled TCs set by FW */
|
|
if (pf->flags & I40E_FLAG_MFP_ENABLED)
|
|
return pf->hw.func_caps.enabled_tcmap;
|
|
|
|
/* SFP mode we want PF to be enabled for all TCs */
|
|
return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_get_bw_info - Query VSI BW Information
|
|
* @vsi: the VSI being queried
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_aqc_query_vsi_ets_sla_config_resp bw_ets_config = {0};
|
|
struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0};
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
i40e_status aq_ret;
|
|
u32 tc_bw_max;
|
|
int i;
|
|
|
|
/* Get the VSI level BW configuration */
|
|
aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL);
|
|
if (aq_ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"couldn't get pf vsi bw config, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the VSI level BW configuration per TC */
|
|
aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config,
|
|
NULL);
|
|
if (aq_ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"couldn't get pf vsi ets bw config, err %d, aq_err %d\n",
|
|
aq_ret, pf->hw.aq.asq_last_status);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Enabled TCs mismatch from querying VSI BW info 0x%08x 0x%08x\n",
|
|
bw_config.tc_valid_bits,
|
|
bw_ets_config.tc_valid_bits);
|
|
/* Still continuing */
|
|
}
|
|
|
|
vsi->bw_limit = le16_to_cpu(bw_config.port_bw_limit);
|
|
vsi->bw_max_quanta = bw_config.max_bw;
|
|
tc_bw_max = le16_to_cpu(bw_ets_config.tc_bw_max[0]) |
|
|
(le16_to_cpu(bw_ets_config.tc_bw_max[1]) << 16);
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
vsi->bw_ets_share_credits[i] = bw_ets_config.share_credits[i];
|
|
vsi->bw_ets_limit_credits[i] =
|
|
le16_to_cpu(bw_ets_config.credits[i]);
|
|
/* 3 bits out of 4 for each TC */
|
|
vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_configure_bw_alloc - Configure VSI BW allocation per TC
|
|
* @vsi: the VSI being configured
|
|
* @enabled_tc: TC bitmap
|
|
* @bw_credits: BW shared credits per TC
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
|
|
u8 *bw_share)
|
|
{
|
|
struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
|
|
i40e_status aq_ret;
|
|
int i;
|
|
|
|
bw_data.tc_valid_bits = enabled_tc;
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
|
|
bw_data.tc_bw_credits[i] = bw_share[i];
|
|
|
|
aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
|
|
NULL);
|
|
if (aq_ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"%s: AQ command Config VSI BW allocation per TC failed = %d\n",
|
|
__func__, vsi->back->hw.aq.asq_last_status);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
|
|
vsi->info.qs_handle[i] = bw_data.qs_handles[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_config_netdev_tc - Setup the netdev TC configuration
|
|
* @vsi: the VSI being configured
|
|
* @enabled_tc: TC map to be enabled
|
|
*
|
|
**/
|
|
static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
|
|
{
|
|
struct net_device *netdev = vsi->netdev;
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u8 netdev_tc = 0;
|
|
int i;
|
|
struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
|
|
|
|
if (!netdev)
|
|
return;
|
|
|
|
if (!enabled_tc) {
|
|
netdev_reset_tc(netdev);
|
|
return;
|
|
}
|
|
|
|
/* Set up actual enabled TCs on the VSI */
|
|
if (netdev_set_num_tc(netdev, vsi->tc_config.numtc))
|
|
return;
|
|
|
|
/* set per TC queues for the VSI */
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
/* Only set TC queues for enabled tcs
|
|
*
|
|
* e.g. For a VSI that has TC0 and TC3 enabled the
|
|
* enabled_tc bitmap would be 0x00001001; the driver
|
|
* will set the numtc for netdev as 2 that will be
|
|
* referenced by the netdev layer as TC 0 and 1.
|
|
*/
|
|
if (vsi->tc_config.enabled_tc & (1 << i))
|
|
netdev_set_tc_queue(netdev,
|
|
vsi->tc_config.tc_info[i].netdev_tc,
|
|
vsi->tc_config.tc_info[i].qcount,
|
|
vsi->tc_config.tc_info[i].qoffset);
|
|
}
|
|
|
|
/* Assign UP2TC map for the VSI */
|
|
for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
|
|
/* Get the actual TC# for the UP */
|
|
u8 ets_tc = dcbcfg->etscfg.prioritytable[i];
|
|
/* Get the mapped netdev TC# for the UP */
|
|
netdev_tc = vsi->tc_config.tc_info[ets_tc].netdev_tc;
|
|
netdev_set_prio_tc_map(netdev, i, netdev_tc);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_update_queue_map - Update our copy of VSi info with new queue map
|
|
* @vsi: the VSI being configured
|
|
* @ctxt: the ctxt buffer returned from AQ VSI update param command
|
|
**/
|
|
static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
|
|
struct i40e_vsi_context *ctxt)
|
|
{
|
|
/* copy just the sections touched not the entire info
|
|
* since not all sections are valid as returned by
|
|
* update vsi params
|
|
*/
|
|
vsi->info.mapping_flags = ctxt->info.mapping_flags;
|
|
memcpy(&vsi->info.queue_mapping,
|
|
&ctxt->info.queue_mapping, sizeof(vsi->info.queue_mapping));
|
|
memcpy(&vsi->info.tc_mapping, ctxt->info.tc_mapping,
|
|
sizeof(vsi->info.tc_mapping));
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
|
|
* @vsi: VSI to be configured
|
|
* @enabled_tc: TC bitmap
|
|
*
|
|
* This configures a particular VSI for TCs that are mapped to the
|
|
* given TC bitmap. It uses default bandwidth share for TCs across
|
|
* VSIs to configure TC for a particular VSI.
|
|
*
|
|
* NOTE:
|
|
* It is expected that the VSI queues have been quisced before calling
|
|
* this function.
|
|
**/
|
|
static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
|
|
{
|
|
u8 bw_share[I40E_MAX_TRAFFIC_CLASS] = {0};
|
|
struct i40e_vsi_context ctxt;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
/* Check if enabled_tc is same as existing or new TCs */
|
|
if (vsi->tc_config.enabled_tc == enabled_tc)
|
|
return ret;
|
|
|
|
/* Enable ETS TCs with equal BW Share for now across all VSIs */
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
if (enabled_tc & (1 << i))
|
|
bw_share[i] = 1;
|
|
}
|
|
|
|
ret = i40e_vsi_configure_bw_alloc(vsi, enabled_tc, bw_share);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed configuring TC map %d for VSI %d\n",
|
|
enabled_tc, vsi->seid);
|
|
goto out;
|
|
}
|
|
|
|
/* Update Queue Pairs Mapping for currently enabled UPs */
|
|
ctxt.seid = vsi->seid;
|
|
ctxt.pf_num = vsi->back->hw.pf_id;
|
|
ctxt.vf_num = 0;
|
|
ctxt.uplink_seid = vsi->uplink_seid;
|
|
memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
|
|
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
|
|
|
|
/* Update the VSI after updating the VSI queue-mapping information */
|
|
ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"update vsi failed, aq_err=%d\n",
|
|
vsi->back->hw.aq.asq_last_status);
|
|
goto out;
|
|
}
|
|
/* update the local VSI info with updated queue map */
|
|
i40e_vsi_update_queue_map(vsi, &ctxt);
|
|
vsi->info.valid_sections = 0;
|
|
|
|
/* Update current VSI BW information */
|
|
ret = i40e_vsi_get_bw_info(vsi);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"Failed updating vsi bw info, aq_err=%d\n",
|
|
vsi->back->hw.aq.asq_last_status);
|
|
goto out;
|
|
}
|
|
|
|
/* Update the netdev TC setup */
|
|
i40e_vsi_config_netdev_tc(vsi, enabled_tc);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_up_complete - Finish the last steps of bringing up a connection
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static int i40e_up_complete(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
int err;
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
|
|
i40e_vsi_configure_msix(vsi);
|
|
else
|
|
i40e_configure_msi_and_legacy(vsi);
|
|
|
|
/* start rings */
|
|
err = i40e_vsi_control_rings(vsi, true);
|
|
if (err)
|
|
return err;
|
|
|
|
clear_bit(__I40E_DOWN, &vsi->state);
|
|
i40e_napi_enable_all(vsi);
|
|
i40e_vsi_enable_irq(vsi);
|
|
|
|
if ((pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP) &&
|
|
(vsi->netdev)) {
|
|
netdev_info(vsi->netdev, "NIC Link is Up\n");
|
|
netif_tx_start_all_queues(vsi->netdev);
|
|
netif_carrier_on(vsi->netdev);
|
|
} else if (vsi->netdev) {
|
|
netdev_info(vsi->netdev, "NIC Link is Down\n");
|
|
}
|
|
i40e_service_event_schedule(pf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_reinit_locked - Reset the VSI
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* Rebuild the ring structs after some configuration
|
|
* has changed, e.g. MTU size.
|
|
**/
|
|
static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
|
|
WARN_ON(in_interrupt());
|
|
while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
|
|
usleep_range(1000, 2000);
|
|
i40e_down(vsi);
|
|
|
|
/* Give a VF some time to respond to the reset. The
|
|
* two second wait is based upon the watchdog cycle in
|
|
* the VF driver.
|
|
*/
|
|
if (vsi->type == I40E_VSI_SRIOV)
|
|
msleep(2000);
|
|
i40e_up(vsi);
|
|
clear_bit(__I40E_CONFIG_BUSY, &pf->state);
|
|
}
|
|
|
|
/**
|
|
* i40e_up - Bring the connection back up after being down
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
int i40e_up(struct i40e_vsi *vsi)
|
|
{
|
|
int err;
|
|
|
|
err = i40e_vsi_configure(vsi);
|
|
if (!err)
|
|
err = i40e_up_complete(vsi);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_down - Shutdown the connection processing
|
|
* @vsi: the VSI being stopped
|
|
**/
|
|
void i40e_down(struct i40e_vsi *vsi)
|
|
{
|
|
int i;
|
|
|
|
/* It is assumed that the caller of this function
|
|
* sets the vsi->state __I40E_DOWN bit.
|
|
*/
|
|
if (vsi->netdev) {
|
|
netif_carrier_off(vsi->netdev);
|
|
netif_tx_disable(vsi->netdev);
|
|
}
|
|
i40e_vsi_disable_irq(vsi);
|
|
i40e_vsi_control_rings(vsi, false);
|
|
i40e_napi_disable_all(vsi);
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
i40e_clean_tx_ring(vsi->tx_rings[i]);
|
|
i40e_clean_rx_ring(vsi->rx_rings[i]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_setup_tc - configure multiple traffic classes
|
|
* @netdev: net device to configure
|
|
* @tc: number of traffic classes to enable
|
|
**/
|
|
static int i40e_setup_tc(struct net_device *netdev, u8 tc)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
u8 enabled_tc = 0;
|
|
int ret = -EINVAL;
|
|
int i;
|
|
|
|
/* Check if DCB enabled to continue */
|
|
if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
netdev_info(netdev, "DCB is not enabled for adapter\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* Check if MFP enabled */
|
|
if (pf->flags & I40E_FLAG_MFP_ENABLED) {
|
|
netdev_info(netdev, "Configuring TC not supported in MFP mode\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* Check whether tc count is within enabled limit */
|
|
if (tc > i40e_pf_get_num_tc(pf)) {
|
|
netdev_info(netdev, "TC count greater than enabled on link for adapter\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* Generate TC map for number of tc requested */
|
|
for (i = 0; i < tc; i++)
|
|
enabled_tc |= (1 << i);
|
|
|
|
/* Requesting same TC configuration as already enabled */
|
|
if (enabled_tc == vsi->tc_config.enabled_tc)
|
|
return 0;
|
|
|
|
/* Quiesce VSI queues */
|
|
i40e_quiesce_vsi(vsi);
|
|
|
|
/* Configure VSI for enabled TCs */
|
|
ret = i40e_vsi_config_tc(vsi, enabled_tc);
|
|
if (ret) {
|
|
netdev_info(netdev, "Failed configuring TC for VSI seid=%d\n",
|
|
vsi->seid);
|
|
goto exit;
|
|
}
|
|
|
|
/* Unquiesce VSI */
|
|
i40e_unquiesce_vsi(vsi);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_open - Called when a network interface is made active
|
|
* @netdev: network interface device structure
|
|
*
|
|
* The open entry point is called when a network interface is made
|
|
* active by the system (IFF_UP). At this point all resources needed
|
|
* for transmit and receive operations are allocated, the interrupt
|
|
* handler is registered with the OS, the netdev watchdog subtask is
|
|
* enabled, and the stack is notified that the interface is ready.
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static int i40e_open(struct net_device *netdev)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
char int_name[IFNAMSIZ];
|
|
int err;
|
|
|
|
/* disallow open during test */
|
|
if (test_bit(__I40E_TESTING, &pf->state))
|
|
return -EBUSY;
|
|
|
|
netif_carrier_off(netdev);
|
|
|
|
/* allocate descriptors */
|
|
err = i40e_vsi_setup_tx_resources(vsi);
|
|
if (err)
|
|
goto err_setup_tx;
|
|
err = i40e_vsi_setup_rx_resources(vsi);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
|
|
err = i40e_vsi_configure(vsi);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
|
|
snprintf(int_name, sizeof(int_name) - 1, "%s-%s",
|
|
dev_driver_string(&pf->pdev->dev), netdev->name);
|
|
err = i40e_vsi_request_irq(vsi, int_name);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
|
|
/* Notify the stack of the actual queue counts. */
|
|
err = netif_set_real_num_tx_queues(netdev, pf->num_tx_queues);
|
|
if (err)
|
|
goto err_set_queues;
|
|
|
|
err = netif_set_real_num_rx_queues(netdev, pf->num_rx_queues);
|
|
if (err)
|
|
goto err_set_queues;
|
|
|
|
err = i40e_up_complete(vsi);
|
|
if (err)
|
|
goto err_up_complete;
|
|
|
|
if ((vsi->type == I40E_VSI_MAIN) || (vsi->type == I40E_VSI_VMDQ2)) {
|
|
err = i40e_aq_set_vsi_broadcast(&pf->hw, vsi->seid, true, NULL);
|
|
if (err)
|
|
netdev_info(netdev,
|
|
"couldn't set broadcast err %d aq_err %d\n",
|
|
err, pf->hw.aq.asq_last_status);
|
|
}
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
vxlan_get_rx_port(netdev);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
err_up_complete:
|
|
i40e_down(vsi);
|
|
err_set_queues:
|
|
i40e_vsi_free_irq(vsi);
|
|
err_setup_rx:
|
|
i40e_vsi_free_rx_resources(vsi);
|
|
err_setup_tx:
|
|
i40e_vsi_free_tx_resources(vsi);
|
|
if (vsi == pf->vsi[pf->lan_vsi])
|
|
i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_close - Disables a network interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* The close entry point is called when an interface is de-activated
|
|
* by the OS. The hardware is still under the driver's control, but
|
|
* this netdev interface is disabled.
|
|
*
|
|
* Returns 0, this is not allowed to fail
|
|
**/
|
|
static int i40e_close(struct net_device *netdev)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
|
|
if (test_and_set_bit(__I40E_DOWN, &vsi->state))
|
|
return 0;
|
|
|
|
i40e_down(vsi);
|
|
i40e_vsi_free_irq(vsi);
|
|
|
|
i40e_vsi_free_tx_resources(vsi);
|
|
i40e_vsi_free_rx_resources(vsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_do_reset - Start a PF or Core Reset sequence
|
|
* @pf: board private structure
|
|
* @reset_flags: which reset is requested
|
|
*
|
|
* The essential difference in resets is that the PF Reset
|
|
* doesn't clear the packet buffers, doesn't reset the PE
|
|
* firmware, and doesn't bother the other PFs on the chip.
|
|
**/
|
|
void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
|
|
{
|
|
u32 val;
|
|
|
|
WARN_ON(in_interrupt());
|
|
|
|
/* do the biggest reset indicated */
|
|
if (reset_flags & (1 << __I40E_GLOBAL_RESET_REQUESTED)) {
|
|
|
|
/* Request a Global Reset
|
|
*
|
|
* This will start the chip's countdown to the actual full
|
|
* chip reset event, and a warning interrupt to be sent
|
|
* to all PFs, including the requestor. Our handler
|
|
* for the warning interrupt will deal with the shutdown
|
|
* and recovery of the switch setup.
|
|
*/
|
|
dev_info(&pf->pdev->dev, "GlobalR requested\n");
|
|
val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
|
|
val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
|
|
wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
|
|
|
|
} else if (reset_flags & (1 << __I40E_CORE_RESET_REQUESTED)) {
|
|
|
|
/* Request a Core Reset
|
|
*
|
|
* Same as Global Reset, except does *not* include the MAC/PHY
|
|
*/
|
|
dev_info(&pf->pdev->dev, "CoreR requested\n");
|
|
val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
|
|
val |= I40E_GLGEN_RTRIG_CORER_MASK;
|
|
wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
|
|
i40e_flush(&pf->hw);
|
|
|
|
} else if (reset_flags & (1 << __I40E_EMP_RESET_REQUESTED)) {
|
|
|
|
/* Request a Firmware Reset
|
|
*
|
|
* Same as Global reset, plus restarting the
|
|
* embedded firmware engine.
|
|
*/
|
|
/* enable EMP Reset */
|
|
val = rd32(&pf->hw, I40E_GLGEN_RSTENA_EMP);
|
|
val |= I40E_GLGEN_RSTENA_EMP_EMP_RST_ENA_MASK;
|
|
wr32(&pf->hw, I40E_GLGEN_RSTENA_EMP, val);
|
|
|
|
/* force the reset */
|
|
val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
|
|
val |= I40E_GLGEN_RTRIG_EMPFWR_MASK;
|
|
wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
|
|
i40e_flush(&pf->hw);
|
|
|
|
} else if (reset_flags & (1 << __I40E_PF_RESET_REQUESTED)) {
|
|
|
|
/* Request a PF Reset
|
|
*
|
|
* Resets only the PF-specific registers
|
|
*
|
|
* This goes directly to the tear-down and rebuild of
|
|
* the switch, since we need to do all the recovery as
|
|
* for the Core Reset.
|
|
*/
|
|
dev_info(&pf->pdev->dev, "PFR requested\n");
|
|
i40e_handle_reset_warning(pf);
|
|
|
|
} else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
|
|
int v;
|
|
|
|
/* Find the VSI(s) that requested a re-init */
|
|
dev_info(&pf->pdev->dev,
|
|
"VSI reinit requested\n");
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
struct i40e_vsi *vsi = pf->vsi[v];
|
|
if (vsi != NULL &&
|
|
test_bit(__I40E_REINIT_REQUESTED, &vsi->state)) {
|
|
i40e_vsi_reinit_locked(pf->vsi[v]);
|
|
clear_bit(__I40E_REINIT_REQUESTED, &vsi->state);
|
|
}
|
|
}
|
|
|
|
/* no further action needed, so return now */
|
|
return;
|
|
} else {
|
|
dev_info(&pf->pdev->dev,
|
|
"bad reset request 0x%08x\n", reset_flags);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_do_reset_safe - Protected reset path for userland calls.
|
|
* @pf: board private structure
|
|
* @reset_flags: which reset is requested
|
|
*
|
|
**/
|
|
void i40e_do_reset_safe(struct i40e_pf *pf, u32 reset_flags)
|
|
{
|
|
rtnl_lock();
|
|
i40e_do_reset(pf, reset_flags);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/**
|
|
* i40e_handle_lan_overflow_event - Handler for LAN queue overflow event
|
|
* @pf: board private structure
|
|
* @e: event info posted on ARQ
|
|
*
|
|
* Handler for LAN Queue Overflow Event generated by the firmware for PF
|
|
* and VF queues
|
|
**/
|
|
static void i40e_handle_lan_overflow_event(struct i40e_pf *pf,
|
|
struct i40e_arq_event_info *e)
|
|
{
|
|
struct i40e_aqc_lan_overflow *data =
|
|
(struct i40e_aqc_lan_overflow *)&e->desc.params.raw;
|
|
u32 queue = le32_to_cpu(data->prtdcb_rupto);
|
|
u32 qtx_ctl = le32_to_cpu(data->otx_ctl);
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_vf *vf;
|
|
u16 vf_id;
|
|
|
|
dev_info(&pf->pdev->dev, "%s: Rx Queue Number = %d QTX_CTL=0x%08x\n",
|
|
__func__, queue, qtx_ctl);
|
|
|
|
/* Queue belongs to VF, find the VF and issue VF reset */
|
|
if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
|
|
>> I40E_QTX_CTL_PFVF_Q_SHIFT) == I40E_QTX_CTL_VF_QUEUE) {
|
|
vf_id = (u16)((qtx_ctl & I40E_QTX_CTL_VFVM_INDX_MASK)
|
|
>> I40E_QTX_CTL_VFVM_INDX_SHIFT);
|
|
vf_id -= hw->func_caps.vf_base_id;
|
|
vf = &pf->vf[vf_id];
|
|
i40e_vc_notify_vf_reset(vf);
|
|
/* Allow VF to process pending reset notification */
|
|
msleep(20);
|
|
i40e_reset_vf(vf, false);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_service_event_complete - Finish up the service event
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_service_event_complete(struct i40e_pf *pf)
|
|
{
|
|
BUG_ON(!test_bit(__I40E_SERVICE_SCHED, &pf->state));
|
|
|
|
/* flush memory to make sure state is correct before next watchog */
|
|
smp_mb__before_clear_bit();
|
|
clear_bit(__I40E_SERVICE_SCHED, &pf->state);
|
|
}
|
|
|
|
/**
|
|
* i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
|
|
{
|
|
if (!(pf->flags & I40E_FLAG_FDIR_REQUIRES_REINIT))
|
|
return;
|
|
|
|
pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
|
|
|
|
/* if interface is down do nothing */
|
|
if (test_bit(__I40E_DOWN, &pf->state))
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_link_event - notify VSI of a link event
|
|
* @vsi: vsi to be notified
|
|
* @link_up: link up or down
|
|
**/
|
|
static void i40e_vsi_link_event(struct i40e_vsi *vsi, bool link_up)
|
|
{
|
|
if (!vsi)
|
|
return;
|
|
|
|
switch (vsi->type) {
|
|
case I40E_VSI_MAIN:
|
|
if (!vsi->netdev || !vsi->netdev_registered)
|
|
break;
|
|
|
|
if (link_up) {
|
|
netif_carrier_on(vsi->netdev);
|
|
netif_tx_wake_all_queues(vsi->netdev);
|
|
} else {
|
|
netif_carrier_off(vsi->netdev);
|
|
netif_tx_stop_all_queues(vsi->netdev);
|
|
}
|
|
break;
|
|
|
|
case I40E_VSI_SRIOV:
|
|
break;
|
|
|
|
case I40E_VSI_VMDQ2:
|
|
case I40E_VSI_CTRL:
|
|
case I40E_VSI_MIRROR:
|
|
default:
|
|
/* there is no notification for other VSIs */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_link_event - notify elements on the veb of a link event
|
|
* @veb: veb to be notified
|
|
* @link_up: link up or down
|
|
**/
|
|
static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
|
|
{
|
|
struct i40e_pf *pf;
|
|
int i;
|
|
|
|
if (!veb || !veb->pf)
|
|
return;
|
|
pf = veb->pf;
|
|
|
|
/* depth first... */
|
|
for (i = 0; i < I40E_MAX_VEB; i++)
|
|
if (pf->veb[i] && (pf->veb[i]->uplink_seid == veb->seid))
|
|
i40e_veb_link_event(pf->veb[i], link_up);
|
|
|
|
/* ... now the local VSIs */
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
|
|
if (pf->vsi[i] && (pf->vsi[i]->uplink_seid == veb->seid))
|
|
i40e_vsi_link_event(pf->vsi[i], link_up);
|
|
}
|
|
|
|
/**
|
|
* i40e_link_event - Update netif_carrier status
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_link_event(struct i40e_pf *pf)
|
|
{
|
|
bool new_link, old_link;
|
|
|
|
new_link = (pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP);
|
|
old_link = (pf->hw.phy.link_info_old.link_info & I40E_AQ_LINK_UP);
|
|
|
|
if (new_link == old_link)
|
|
return;
|
|
|
|
if (!test_bit(__I40E_DOWN, &pf->vsi[pf->lan_vsi]->state))
|
|
netdev_info(pf->vsi[pf->lan_vsi]->netdev,
|
|
"NIC Link is %s\n", (new_link ? "Up" : "Down"));
|
|
|
|
/* Notify the base of the switch tree connected to
|
|
* the link. Floating VEBs are not notified.
|
|
*/
|
|
if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
|
|
i40e_veb_link_event(pf->veb[pf->lan_veb], new_link);
|
|
else
|
|
i40e_vsi_link_event(pf->vsi[pf->lan_vsi], new_link);
|
|
|
|
if (pf->vf)
|
|
i40e_vc_notify_link_state(pf);
|
|
}
|
|
|
|
/**
|
|
* i40e_check_hang_subtask - Check for hung queues and dropped interrupts
|
|
* @pf: board private structure
|
|
*
|
|
* Set the per-queue flags to request a check for stuck queues in the irq
|
|
* clean functions, then force interrupts to be sure the irq clean is called.
|
|
**/
|
|
static void i40e_check_hang_subtask(struct i40e_pf *pf)
|
|
{
|
|
int i, v;
|
|
|
|
/* If we're down or resetting, just bail */
|
|
if (test_bit(__I40E_CONFIG_BUSY, &pf->state))
|
|
return;
|
|
|
|
/* for each VSI/netdev
|
|
* for each Tx queue
|
|
* set the check flag
|
|
* for each q_vector
|
|
* force an interrupt
|
|
*/
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
struct i40e_vsi *vsi = pf->vsi[v];
|
|
int armed = 0;
|
|
|
|
if (!pf->vsi[v] ||
|
|
test_bit(__I40E_DOWN, &vsi->state) ||
|
|
(vsi->netdev && !netif_carrier_ok(vsi->netdev)))
|
|
continue;
|
|
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
set_check_for_tx_hang(vsi->tx_rings[i]);
|
|
if (test_bit(__I40E_HANG_CHECK_ARMED,
|
|
&vsi->tx_rings[i]->state))
|
|
armed++;
|
|
}
|
|
|
|
if (armed) {
|
|
if (!(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
|
|
wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0,
|
|
(I40E_PFINT_DYN_CTL0_INTENA_MASK |
|
|
I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK));
|
|
} else {
|
|
u16 vec = vsi->base_vector - 1;
|
|
u32 val = (I40E_PFINT_DYN_CTLN_INTENA_MASK |
|
|
I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK);
|
|
for (i = 0; i < vsi->num_q_vectors; i++, vec++)
|
|
wr32(&vsi->back->hw,
|
|
I40E_PFINT_DYN_CTLN(vec), val);
|
|
}
|
|
i40e_flush(&vsi->back->hw);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_watchdog_subtask - Check and bring link up
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_watchdog_subtask(struct i40e_pf *pf)
|
|
{
|
|
int i;
|
|
|
|
/* if interface is down do nothing */
|
|
if (test_bit(__I40E_DOWN, &pf->state) ||
|
|
test_bit(__I40E_CONFIG_BUSY, &pf->state))
|
|
return;
|
|
|
|
/* Update the stats for active netdevs so the network stack
|
|
* can look at updated numbers whenever it cares to
|
|
*/
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
|
|
if (pf->vsi[i] && pf->vsi[i]->netdev)
|
|
i40e_update_stats(pf->vsi[i]);
|
|
|
|
/* Update the stats for the active switching components */
|
|
for (i = 0; i < I40E_MAX_VEB; i++)
|
|
if (pf->veb[i])
|
|
i40e_update_veb_stats(pf->veb[i]);
|
|
}
|
|
|
|
/**
|
|
* i40e_reset_subtask - Set up for resetting the device and driver
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_reset_subtask(struct i40e_pf *pf)
|
|
{
|
|
u32 reset_flags = 0;
|
|
|
|
rtnl_lock();
|
|
if (test_bit(__I40E_REINIT_REQUESTED, &pf->state)) {
|
|
reset_flags |= (1 << __I40E_REINIT_REQUESTED);
|
|
clear_bit(__I40E_REINIT_REQUESTED, &pf->state);
|
|
}
|
|
if (test_bit(__I40E_PF_RESET_REQUESTED, &pf->state)) {
|
|
reset_flags |= (1 << __I40E_PF_RESET_REQUESTED);
|
|
clear_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
|
|
}
|
|
if (test_bit(__I40E_CORE_RESET_REQUESTED, &pf->state)) {
|
|
reset_flags |= (1 << __I40E_CORE_RESET_REQUESTED);
|
|
clear_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
|
|
}
|
|
if (test_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state)) {
|
|
reset_flags |= (1 << __I40E_GLOBAL_RESET_REQUESTED);
|
|
clear_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
|
|
}
|
|
|
|
/* If there's a recovery already waiting, it takes
|
|
* precedence before starting a new reset sequence.
|
|
*/
|
|
if (test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) {
|
|
i40e_handle_reset_warning(pf);
|
|
goto unlock;
|
|
}
|
|
|
|
/* If we're already down or resetting, just bail */
|
|
if (reset_flags &&
|
|
!test_bit(__I40E_DOWN, &pf->state) &&
|
|
!test_bit(__I40E_CONFIG_BUSY, &pf->state))
|
|
i40e_do_reset(pf, reset_flags);
|
|
|
|
unlock:
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/**
|
|
* i40e_handle_link_event - Handle link event
|
|
* @pf: board private structure
|
|
* @e: event info posted on ARQ
|
|
**/
|
|
static void i40e_handle_link_event(struct i40e_pf *pf,
|
|
struct i40e_arq_event_info *e)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_aqc_get_link_status *status =
|
|
(struct i40e_aqc_get_link_status *)&e->desc.params.raw;
|
|
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
|
|
|
|
/* save off old link status information */
|
|
memcpy(&pf->hw.phy.link_info_old, hw_link_info,
|
|
sizeof(pf->hw.phy.link_info_old));
|
|
|
|
/* update link status */
|
|
hw_link_info->phy_type = (enum i40e_aq_phy_type)status->phy_type;
|
|
hw_link_info->link_speed = (enum i40e_aq_link_speed)status->link_speed;
|
|
hw_link_info->link_info = status->link_info;
|
|
hw_link_info->an_info = status->an_info;
|
|
hw_link_info->ext_info = status->ext_info;
|
|
hw_link_info->lse_enable =
|
|
le16_to_cpu(status->command_flags) &
|
|
I40E_AQ_LSE_ENABLE;
|
|
|
|
/* process the event */
|
|
i40e_link_event(pf);
|
|
|
|
/* Do a new status request to re-enable LSE reporting
|
|
* and load new status information into the hw struct,
|
|
* then see if the status changed while processing the
|
|
* initial event.
|
|
*/
|
|
i40e_aq_get_link_info(&pf->hw, true, NULL, NULL);
|
|
i40e_link_event(pf);
|
|
}
|
|
|
|
/**
|
|
* i40e_clean_adminq_subtask - Clean the AdminQ rings
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_arq_event_info event;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u16 pending, i = 0;
|
|
i40e_status ret;
|
|
u16 opcode;
|
|
u32 val;
|
|
|
|
if (!test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state))
|
|
return;
|
|
|
|
event.msg_size = I40E_MAX_AQ_BUF_SIZE;
|
|
event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
|
|
if (!event.msg_buf)
|
|
return;
|
|
|
|
do {
|
|
ret = i40e_clean_arq_element(hw, &event, &pending);
|
|
if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK) {
|
|
dev_info(&pf->pdev->dev, "No ARQ event found\n");
|
|
break;
|
|
} else if (ret) {
|
|
dev_info(&pf->pdev->dev, "ARQ event error %d\n", ret);
|
|
break;
|
|
}
|
|
|
|
opcode = le16_to_cpu(event.desc.opcode);
|
|
switch (opcode) {
|
|
|
|
case i40e_aqc_opc_get_link_status:
|
|
i40e_handle_link_event(pf, &event);
|
|
break;
|
|
case i40e_aqc_opc_send_msg_to_pf:
|
|
ret = i40e_vc_process_vf_msg(pf,
|
|
le16_to_cpu(event.desc.retval),
|
|
le32_to_cpu(event.desc.cookie_high),
|
|
le32_to_cpu(event.desc.cookie_low),
|
|
event.msg_buf,
|
|
event.msg_size);
|
|
break;
|
|
case i40e_aqc_opc_lldp_update_mib:
|
|
dev_info(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
|
|
break;
|
|
case i40e_aqc_opc_event_lan_overflow:
|
|
dev_info(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
|
|
i40e_handle_lan_overflow_event(pf, &event);
|
|
break;
|
|
default:
|
|
dev_info(&pf->pdev->dev,
|
|
"ARQ Error: Unknown event %d received\n",
|
|
event.desc.opcode);
|
|
break;
|
|
}
|
|
} while (pending && (i++ < pf->adminq_work_limit));
|
|
|
|
clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
|
|
/* re-enable Admin queue interrupt cause */
|
|
val = rd32(hw, I40E_PFINT_ICR0_ENA);
|
|
val |= I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, val);
|
|
i40e_flush(hw);
|
|
|
|
kfree(event.msg_buf);
|
|
}
|
|
|
|
/**
|
|
* i40e_reconstitute_veb - rebuild the VEB and anything connected to it
|
|
* @veb: pointer to the VEB instance
|
|
*
|
|
* This is a recursive function that first builds the attached VSIs then
|
|
* recurses in to build the next layer of VEB. We track the connections
|
|
* through our own index numbers because the seid's from the HW could
|
|
* change across the reset.
|
|
**/
|
|
static int i40e_reconstitute_veb(struct i40e_veb *veb)
|
|
{
|
|
struct i40e_vsi *ctl_vsi = NULL;
|
|
struct i40e_pf *pf = veb->pf;
|
|
int v, veb_idx;
|
|
int ret;
|
|
|
|
/* build VSI that owns this VEB, temporarily attached to base VEB */
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis && !ctl_vsi; v++) {
|
|
if (pf->vsi[v] &&
|
|
pf->vsi[v]->veb_idx == veb->idx &&
|
|
pf->vsi[v]->flags & I40E_VSI_FLAG_VEB_OWNER) {
|
|
ctl_vsi = pf->vsi[v];
|
|
break;
|
|
}
|
|
}
|
|
if (!ctl_vsi) {
|
|
dev_info(&pf->pdev->dev,
|
|
"missing owner VSI for veb_idx %d\n", veb->idx);
|
|
ret = -ENOENT;
|
|
goto end_reconstitute;
|
|
}
|
|
if (ctl_vsi != pf->vsi[pf->lan_vsi])
|
|
ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
|
|
ret = i40e_add_vsi(ctl_vsi);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"rebuild of owner VSI failed: %d\n", ret);
|
|
goto end_reconstitute;
|
|
}
|
|
i40e_vsi_reset_stats(ctl_vsi);
|
|
|
|
/* create the VEB in the switch and move the VSI onto the VEB */
|
|
ret = i40e_add_veb(veb, ctl_vsi);
|
|
if (ret)
|
|
goto end_reconstitute;
|
|
|
|
/* create the remaining VSIs attached to this VEB */
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
if (!pf->vsi[v] || pf->vsi[v] == ctl_vsi)
|
|
continue;
|
|
|
|
if (pf->vsi[v]->veb_idx == veb->idx) {
|
|
struct i40e_vsi *vsi = pf->vsi[v];
|
|
vsi->uplink_seid = veb->seid;
|
|
ret = i40e_add_vsi(vsi);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"rebuild of vsi_idx %d failed: %d\n",
|
|
v, ret);
|
|
goto end_reconstitute;
|
|
}
|
|
i40e_vsi_reset_stats(vsi);
|
|
}
|
|
}
|
|
|
|
/* create any VEBs attached to this VEB - RECURSION */
|
|
for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
|
|
if (pf->veb[veb_idx] && pf->veb[veb_idx]->veb_idx == veb->idx) {
|
|
pf->veb[veb_idx]->uplink_seid = veb->seid;
|
|
ret = i40e_reconstitute_veb(pf->veb[veb_idx]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
end_reconstitute:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_get_capabilities - get info about the HW
|
|
* @pf: the PF struct
|
|
**/
|
|
static int i40e_get_capabilities(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_aqc_list_capabilities_element_resp *cap_buf;
|
|
u16 data_size;
|
|
int buf_len;
|
|
int err;
|
|
|
|
buf_len = 40 * sizeof(struct i40e_aqc_list_capabilities_element_resp);
|
|
do {
|
|
cap_buf = kzalloc(buf_len, GFP_KERNEL);
|
|
if (!cap_buf)
|
|
return -ENOMEM;
|
|
|
|
/* this loads the data into the hw struct for us */
|
|
err = i40e_aq_discover_capabilities(&pf->hw, cap_buf, buf_len,
|
|
&data_size,
|
|
i40e_aqc_opc_list_func_capabilities,
|
|
NULL);
|
|
/* data loaded, buffer no longer needed */
|
|
kfree(cap_buf);
|
|
|
|
if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) {
|
|
/* retry with a larger buffer */
|
|
buf_len = data_size;
|
|
} else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) {
|
|
dev_info(&pf->pdev->dev,
|
|
"capability discovery failed: aq=%d\n",
|
|
pf->hw.aq.asq_last_status);
|
|
return -ENODEV;
|
|
}
|
|
} while (err);
|
|
|
|
if (pf->hw.revision_id == 0 && pf->hw.func_caps.npar_enable) {
|
|
pf->hw.func_caps.num_msix_vectors += 1;
|
|
pf->hw.func_caps.num_tx_qp =
|
|
min_t(int, pf->hw.func_caps.num_tx_qp,
|
|
I40E_MAX_NPAR_QPS);
|
|
}
|
|
|
|
if (pf->hw.debug_mask & I40E_DEBUG_USER)
|
|
dev_info(&pf->pdev->dev,
|
|
"pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
|
|
pf->hw.pf_id, pf->hw.func_caps.num_vfs,
|
|
pf->hw.func_caps.num_msix_vectors,
|
|
pf->hw.func_caps.num_msix_vectors_vf,
|
|
pf->hw.func_caps.fd_filters_guaranteed,
|
|
pf->hw.func_caps.fd_filters_best_effort,
|
|
pf->hw.func_caps.num_tx_qp,
|
|
pf->hw.func_caps.num_vsis);
|
|
|
|
#define DEF_NUM_VSI (1 + (pf->hw.func_caps.fcoe ? 1 : 0) \
|
|
+ pf->hw.func_caps.num_vfs)
|
|
if (pf->hw.revision_id == 0 && (DEF_NUM_VSI > pf->hw.func_caps.num_vsis)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"got num_vsis %d, setting num_vsis to %d\n",
|
|
pf->hw.func_caps.num_vsis, DEF_NUM_VSI);
|
|
pf->hw.func_caps.num_vsis = DEF_NUM_VSI;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_fdir_setup - initialize the Flow Director resources
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_fdir_setup(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_vsi *vsi;
|
|
bool new_vsi = false;
|
|
int err, i;
|
|
|
|
if (!(pf->flags & (I40E_FLAG_FDIR_ENABLED |
|
|
I40E_FLAG_FDIR_ATR_ENABLED)))
|
|
return;
|
|
|
|
pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
|
|
|
|
/* find existing or make new FDIR VSI */
|
|
vsi = NULL;
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
|
|
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR)
|
|
vsi = pf->vsi[i];
|
|
if (!vsi) {
|
|
vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR, pf->mac_seid, 0);
|
|
if (!vsi) {
|
|
dev_info(&pf->pdev->dev, "Couldn't create FDir VSI\n");
|
|
pf->flags &= ~I40E_FLAG_FDIR_ENABLED;
|
|
return;
|
|
}
|
|
new_vsi = true;
|
|
}
|
|
WARN_ON(vsi->base_queue != I40E_FDIR_RING);
|
|
i40e_vsi_setup_irqhandler(vsi, i40e_fdir_clean_rings);
|
|
|
|
err = i40e_vsi_setup_tx_resources(vsi);
|
|
if (!err)
|
|
err = i40e_vsi_setup_rx_resources(vsi);
|
|
if (!err)
|
|
err = i40e_vsi_configure(vsi);
|
|
if (!err && new_vsi) {
|
|
char int_name[IFNAMSIZ + 9];
|
|
snprintf(int_name, sizeof(int_name) - 1, "%s-fdir",
|
|
dev_driver_string(&pf->pdev->dev));
|
|
err = i40e_vsi_request_irq(vsi, int_name);
|
|
}
|
|
if (!err)
|
|
err = i40e_up_complete(vsi);
|
|
|
|
clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
|
|
}
|
|
|
|
/**
|
|
* i40e_fdir_teardown - release the Flow Director resources
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_fdir_teardown(struct i40e_pf *pf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
|
|
i40e_vsi_release(pf->vsi[i]);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_prep_for_reset - prep for the core to reset
|
|
* @pf: board private structure
|
|
*
|
|
* Close up the VFs and other things in prep for pf Reset.
|
|
**/
|
|
static int i40e_prep_for_reset(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
i40e_status ret;
|
|
u32 v;
|
|
|
|
clear_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
|
|
if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
|
|
return 0;
|
|
|
|
dev_info(&pf->pdev->dev, "Tearing down internal switch for reset\n");
|
|
|
|
i40e_vc_notify_reset(pf);
|
|
|
|
/* quiesce the VSIs and their queues that are not already DOWN */
|
|
i40e_pf_quiesce_all_vsi(pf);
|
|
|
|
for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
|
|
if (pf->vsi[v])
|
|
pf->vsi[v]->seid = 0;
|
|
}
|
|
|
|
i40e_shutdown_adminq(&pf->hw);
|
|
|
|
/* call shutdown HMC */
|
|
ret = i40e_shutdown_lan_hmc(hw);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "shutdown_lan_hmc failed: %d\n", ret);
|
|
clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_reset_and_rebuild - reset and rebuid using a saved config
|
|
* @pf: board private structure
|
|
* @reinit: if the Main VSI needs to re-initialized.
|
|
**/
|
|
static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
|
|
{
|
|
struct i40e_driver_version dv;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
i40e_status ret;
|
|
u32 v;
|
|
|
|
/* Now we wait for GRST to settle out.
|
|
* We don't have to delete the VEBs or VSIs from the hw switch
|
|
* because the reset will make them disappear.
|
|
*/
|
|
ret = i40e_pf_reset(hw);
|
|
if (ret)
|
|
dev_info(&pf->pdev->dev, "PF reset failed, %d\n", ret);
|
|
pf->pfr_count++;
|
|
|
|
if (test_bit(__I40E_DOWN, &pf->state))
|
|
goto end_core_reset;
|
|
dev_info(&pf->pdev->dev, "Rebuilding internal switch\n");
|
|
|
|
/* rebuild the basics for the AdminQ, HMC, and initial HW switch */
|
|
ret = i40e_init_adminq(&pf->hw);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "Rebuild AdminQ failed, %d\n", ret);
|
|
goto end_core_reset;
|
|
}
|
|
|
|
ret = i40e_get_capabilities(pf);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "i40e_get_capabilities failed, %d\n",
|
|
ret);
|
|
goto end_core_reset;
|
|
}
|
|
|
|
ret = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
|
|
hw->func_caps.num_rx_qp,
|
|
pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "init_lan_hmc failed: %d\n", ret);
|
|
goto end_core_reset;
|
|
}
|
|
ret = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "configure_lan_hmc failed: %d\n", ret);
|
|
goto end_core_reset;
|
|
}
|
|
|
|
/* do basic switch setup */
|
|
ret = i40e_setup_pf_switch(pf, reinit);
|
|
if (ret)
|
|
goto end_core_reset;
|
|
|
|
/* Rebuild the VSIs and VEBs that existed before reset.
|
|
* They are still in our local switch element arrays, so only
|
|
* need to rebuild the switch model in the HW.
|
|
*
|
|
* If there were VEBs but the reconstitution failed, we'll try
|
|
* try to recover minimal use by getting the basic PF VSI working.
|
|
*/
|
|
if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
|
|
dev_info(&pf->pdev->dev, "attempting to rebuild switch\n");
|
|
/* find the one VEB connected to the MAC, and find orphans */
|
|
for (v = 0; v < I40E_MAX_VEB; v++) {
|
|
if (!pf->veb[v])
|
|
continue;
|
|
|
|
if (pf->veb[v]->uplink_seid == pf->mac_seid ||
|
|
pf->veb[v]->uplink_seid == 0) {
|
|
ret = i40e_reconstitute_veb(pf->veb[v]);
|
|
|
|
if (!ret)
|
|
continue;
|
|
|
|
/* If Main VEB failed, we're in deep doodoo,
|
|
* so give up rebuilding the switch and set up
|
|
* for minimal rebuild of PF VSI.
|
|
* If orphan failed, we'll report the error
|
|
* but try to keep going.
|
|
*/
|
|
if (pf->veb[v]->uplink_seid == pf->mac_seid) {
|
|
dev_info(&pf->pdev->dev,
|
|
"rebuild of switch failed: %d, will try to set up simple PF connection\n",
|
|
ret);
|
|
pf->vsi[pf->lan_vsi]->uplink_seid
|
|
= pf->mac_seid;
|
|
break;
|
|
} else if (pf->veb[v]->uplink_seid == 0) {
|
|
dev_info(&pf->pdev->dev,
|
|
"rebuild of orphan VEB failed: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (pf->vsi[pf->lan_vsi]->uplink_seid == pf->mac_seid) {
|
|
dev_info(&pf->pdev->dev, "attempting to rebuild PF VSI\n");
|
|
/* no VEB, so rebuild only the Main VSI */
|
|
ret = i40e_add_vsi(pf->vsi[pf->lan_vsi]);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"rebuild of Main VSI failed: %d\n", ret);
|
|
goto end_core_reset;
|
|
}
|
|
}
|
|
|
|
/* reinit the misc interrupt */
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
|
|
ret = i40e_setup_misc_vector(pf);
|
|
|
|
/* restart the VSIs that were rebuilt and running before the reset */
|
|
i40e_pf_unquiesce_all_vsi(pf);
|
|
|
|
/* tell the firmware that we're starting */
|
|
dv.major_version = DRV_VERSION_MAJOR;
|
|
dv.minor_version = DRV_VERSION_MINOR;
|
|
dv.build_version = DRV_VERSION_BUILD;
|
|
dv.subbuild_version = 0;
|
|
i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
|
|
|
|
dev_info(&pf->pdev->dev, "PF reset done\n");
|
|
|
|
end_core_reset:
|
|
clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
|
|
}
|
|
|
|
/**
|
|
* i40e_handle_reset_warning - prep for the pf to reset, reset and rebuild
|
|
* @pf: board private structure
|
|
*
|
|
* Close up the VFs and other things in prep for a Core Reset,
|
|
* then get ready to rebuild the world.
|
|
**/
|
|
static void i40e_handle_reset_warning(struct i40e_pf *pf)
|
|
{
|
|
i40e_status ret;
|
|
|
|
ret = i40e_prep_for_reset(pf);
|
|
if (!ret)
|
|
i40e_reset_and_rebuild(pf, false);
|
|
}
|
|
|
|
/**
|
|
* i40e_handle_mdd_event
|
|
* @pf: pointer to the pf structure
|
|
*
|
|
* Called from the MDD irq handler to identify possibly malicious vfs
|
|
**/
|
|
static void i40e_handle_mdd_event(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
bool mdd_detected = false;
|
|
struct i40e_vf *vf;
|
|
u32 reg;
|
|
int i;
|
|
|
|
if (!test_bit(__I40E_MDD_EVENT_PENDING, &pf->state))
|
|
return;
|
|
|
|
/* find what triggered the MDD event */
|
|
reg = rd32(hw, I40E_GL_MDET_TX);
|
|
if (reg & I40E_GL_MDET_TX_VALID_MASK) {
|
|
u8 func = (reg & I40E_GL_MDET_TX_FUNCTION_MASK)
|
|
>> I40E_GL_MDET_TX_FUNCTION_SHIFT;
|
|
u8 event = (reg & I40E_GL_MDET_TX_EVENT_SHIFT)
|
|
>> I40E_GL_MDET_TX_EVENT_SHIFT;
|
|
u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK)
|
|
>> I40E_GL_MDET_TX_QUEUE_SHIFT;
|
|
dev_info(&pf->pdev->dev,
|
|
"Malicious Driver Detection TX event 0x%02x on q %d of function 0x%02x\n",
|
|
event, queue, func);
|
|
wr32(hw, I40E_GL_MDET_TX, 0xffffffff);
|
|
mdd_detected = true;
|
|
}
|
|
reg = rd32(hw, I40E_GL_MDET_RX);
|
|
if (reg & I40E_GL_MDET_RX_VALID_MASK) {
|
|
u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK)
|
|
>> I40E_GL_MDET_RX_FUNCTION_SHIFT;
|
|
u8 event = (reg & I40E_GL_MDET_RX_EVENT_SHIFT)
|
|
>> I40E_GL_MDET_RX_EVENT_SHIFT;
|
|
u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK)
|
|
>> I40E_GL_MDET_RX_QUEUE_SHIFT;
|
|
dev_info(&pf->pdev->dev,
|
|
"Malicious Driver Detection RX event 0x%02x on q %d of function 0x%02x\n",
|
|
event, queue, func);
|
|
wr32(hw, I40E_GL_MDET_RX, 0xffffffff);
|
|
mdd_detected = true;
|
|
}
|
|
|
|
/* see if one of the VFs needs its hand slapped */
|
|
for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
|
|
vf = &(pf->vf[i]);
|
|
reg = rd32(hw, I40E_VP_MDET_TX(i));
|
|
if (reg & I40E_VP_MDET_TX_VALID_MASK) {
|
|
wr32(hw, I40E_VP_MDET_TX(i), 0xFFFF);
|
|
vf->num_mdd_events++;
|
|
dev_info(&pf->pdev->dev, "MDD TX event on VF %d\n", i);
|
|
}
|
|
|
|
reg = rd32(hw, I40E_VP_MDET_RX(i));
|
|
if (reg & I40E_VP_MDET_RX_VALID_MASK) {
|
|
wr32(hw, I40E_VP_MDET_RX(i), 0xFFFF);
|
|
vf->num_mdd_events++;
|
|
dev_info(&pf->pdev->dev, "MDD RX event on VF %d\n", i);
|
|
}
|
|
|
|
if (vf->num_mdd_events > I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Too many MDD events on VF %d, disabled\n", i);
|
|
dev_info(&pf->pdev->dev,
|
|
"Use PF Control I/F to re-enable the VF\n");
|
|
set_bit(I40E_VF_STAT_DISABLED, &vf->vf_states);
|
|
}
|
|
}
|
|
|
|
/* re-enable mdd interrupt cause */
|
|
clear_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
|
|
reg = rd32(hw, I40E_PFINT_ICR0_ENA);
|
|
reg |= I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
|
|
wr32(hw, I40E_PFINT_ICR0_ENA, reg);
|
|
i40e_flush(hw);
|
|
}
|
|
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
/**
|
|
* i40e_sync_vxlan_filters_subtask - Sync the VSI filter list with HW
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_sync_vxlan_filters_subtask(struct i40e_pf *pf)
|
|
{
|
|
const int vxlan_hdr_qwords = 4;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
i40e_status ret;
|
|
u8 filter_index;
|
|
__be16 port;
|
|
int i;
|
|
|
|
if (!(pf->flags & I40E_FLAG_VXLAN_FILTER_SYNC))
|
|
return;
|
|
|
|
pf->flags &= ~I40E_FLAG_VXLAN_FILTER_SYNC;
|
|
|
|
for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
|
|
if (pf->pending_vxlan_bitmap & (1 << i)) {
|
|
pf->pending_vxlan_bitmap &= ~(1 << i);
|
|
port = pf->vxlan_ports[i];
|
|
ret = port ?
|
|
i40e_aq_add_udp_tunnel(hw, ntohs(port),
|
|
vxlan_hdr_qwords,
|
|
I40E_AQC_TUNNEL_TYPE_VXLAN,
|
|
&filter_index, NULL)
|
|
: i40e_aq_del_udp_tunnel(hw, i, NULL);
|
|
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "Failed to execute AQ command for %s port %d with index %d\n",
|
|
port ? "adding" : "deleting",
|
|
ntohs(port), port ? i : i);
|
|
|
|
pf->vxlan_ports[i] = 0;
|
|
} else {
|
|
dev_info(&pf->pdev->dev, "%s port %d with AQ command with index %d\n",
|
|
port ? "Added" : "Deleted",
|
|
ntohs(port), port ? i : filter_index);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif
|
|
/**
|
|
* i40e_service_task - Run the driver's async subtasks
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void i40e_service_task(struct work_struct *work)
|
|
{
|
|
struct i40e_pf *pf = container_of(work,
|
|
struct i40e_pf,
|
|
service_task);
|
|
unsigned long start_time = jiffies;
|
|
|
|
i40e_reset_subtask(pf);
|
|
i40e_handle_mdd_event(pf);
|
|
i40e_vc_process_vflr_event(pf);
|
|
i40e_watchdog_subtask(pf);
|
|
i40e_fdir_reinit_subtask(pf);
|
|
i40e_check_hang_subtask(pf);
|
|
i40e_sync_filters_subtask(pf);
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
i40e_sync_vxlan_filters_subtask(pf);
|
|
#endif
|
|
i40e_clean_adminq_subtask(pf);
|
|
|
|
i40e_service_event_complete(pf);
|
|
|
|
/* If the tasks have taken longer than one timer cycle or there
|
|
* is more work to be done, reschedule the service task now
|
|
* rather than wait for the timer to tick again.
|
|
*/
|
|
if (time_after(jiffies, (start_time + pf->service_timer_period)) ||
|
|
test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state) ||
|
|
test_bit(__I40E_MDD_EVENT_PENDING, &pf->state) ||
|
|
test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
|
|
i40e_service_event_schedule(pf);
|
|
}
|
|
|
|
/**
|
|
* i40e_service_timer - timer callback
|
|
* @data: pointer to PF struct
|
|
**/
|
|
static void i40e_service_timer(unsigned long data)
|
|
{
|
|
struct i40e_pf *pf = (struct i40e_pf *)data;
|
|
|
|
mod_timer(&pf->service_timer,
|
|
round_jiffies(jiffies + pf->service_timer_period));
|
|
i40e_service_event_schedule(pf);
|
|
}
|
|
|
|
/**
|
|
* i40e_set_num_rings_in_vsi - Determine number of rings in the VSI
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
|
|
switch (vsi->type) {
|
|
case I40E_VSI_MAIN:
|
|
vsi->alloc_queue_pairs = pf->num_lan_qps;
|
|
vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
|
|
I40E_REQ_DESCRIPTOR_MULTIPLE);
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
|
|
vsi->num_q_vectors = pf->num_lan_msix;
|
|
else
|
|
vsi->num_q_vectors = 1;
|
|
|
|
break;
|
|
|
|
case I40E_VSI_FDIR:
|
|
vsi->alloc_queue_pairs = 1;
|
|
vsi->num_desc = ALIGN(I40E_FDIR_RING_COUNT,
|
|
I40E_REQ_DESCRIPTOR_MULTIPLE);
|
|
vsi->num_q_vectors = 1;
|
|
break;
|
|
|
|
case I40E_VSI_VMDQ2:
|
|
vsi->alloc_queue_pairs = pf->num_vmdq_qps;
|
|
vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
|
|
I40E_REQ_DESCRIPTOR_MULTIPLE);
|
|
vsi->num_q_vectors = pf->num_vmdq_msix;
|
|
break;
|
|
|
|
case I40E_VSI_SRIOV:
|
|
vsi->alloc_queue_pairs = pf->num_vf_qps;
|
|
vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
|
|
I40E_REQ_DESCRIPTOR_MULTIPLE);
|
|
break;
|
|
|
|
default:
|
|
WARN_ON(1);
|
|
return -ENODATA;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
|
|
* @type: VSI pointer
|
|
* @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
|
|
*
|
|
* On error: returns error code (negative)
|
|
* On success: returns 0
|
|
**/
|
|
static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
|
|
{
|
|
int size;
|
|
int ret = 0;
|
|
|
|
/* allocate memory for both Tx and Rx ring pointers */
|
|
size = sizeof(struct i40e_ring *) * vsi->alloc_queue_pairs * 2;
|
|
vsi->tx_rings = kzalloc(size, GFP_KERNEL);
|
|
if (!vsi->tx_rings)
|
|
return -ENOMEM;
|
|
vsi->rx_rings = &vsi->tx_rings[vsi->alloc_queue_pairs];
|
|
|
|
if (alloc_qvectors) {
|
|
/* allocate memory for q_vector pointers */
|
|
size = sizeof(struct i40e_q_vectors *) * vsi->num_q_vectors;
|
|
vsi->q_vectors = kzalloc(size, GFP_KERNEL);
|
|
if (!vsi->q_vectors) {
|
|
ret = -ENOMEM;
|
|
goto err_vectors;
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
err_vectors:
|
|
kfree(vsi->tx_rings);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_mem_alloc - Allocates the next available struct vsi in the PF
|
|
* @pf: board private structure
|
|
* @type: type of VSI
|
|
*
|
|
* On error: returns error code (negative)
|
|
* On success: returns vsi index in PF (positive)
|
|
**/
|
|
static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
|
|
{
|
|
int ret = -ENODEV;
|
|
struct i40e_vsi *vsi;
|
|
int vsi_idx;
|
|
int i;
|
|
|
|
/* Need to protect the allocation of the VSIs at the PF level */
|
|
mutex_lock(&pf->switch_mutex);
|
|
|
|
/* VSI list may be fragmented if VSI creation/destruction has
|
|
* been happening. We can afford to do a quick scan to look
|
|
* for any free VSIs in the list.
|
|
*
|
|
* find next empty vsi slot, looping back around if necessary
|
|
*/
|
|
i = pf->next_vsi;
|
|
while (i < pf->hw.func_caps.num_vsis && pf->vsi[i])
|
|
i++;
|
|
if (i >= pf->hw.func_caps.num_vsis) {
|
|
i = 0;
|
|
while (i < pf->next_vsi && pf->vsi[i])
|
|
i++;
|
|
}
|
|
|
|
if (i < pf->hw.func_caps.num_vsis && !pf->vsi[i]) {
|
|
vsi_idx = i; /* Found one! */
|
|
} else {
|
|
ret = -ENODEV;
|
|
goto unlock_pf; /* out of VSI slots! */
|
|
}
|
|
pf->next_vsi = ++i;
|
|
|
|
vsi = kzalloc(sizeof(*vsi), GFP_KERNEL);
|
|
if (!vsi) {
|
|
ret = -ENOMEM;
|
|
goto unlock_pf;
|
|
}
|
|
vsi->type = type;
|
|
vsi->back = pf;
|
|
set_bit(__I40E_DOWN, &vsi->state);
|
|
vsi->flags = 0;
|
|
vsi->idx = vsi_idx;
|
|
vsi->rx_itr_setting = pf->rx_itr_default;
|
|
vsi->tx_itr_setting = pf->tx_itr_default;
|
|
vsi->netdev_registered = false;
|
|
vsi->work_limit = I40E_DEFAULT_IRQ_WORK;
|
|
INIT_LIST_HEAD(&vsi->mac_filter_list);
|
|
|
|
ret = i40e_set_num_rings_in_vsi(vsi);
|
|
if (ret)
|
|
goto err_rings;
|
|
|
|
ret = i40e_vsi_alloc_arrays(vsi, true);
|
|
if (ret)
|
|
goto err_rings;
|
|
|
|
/* Setup default MSIX irq handler for VSI */
|
|
i40e_vsi_setup_irqhandler(vsi, i40e_msix_clean_rings);
|
|
|
|
pf->vsi[vsi_idx] = vsi;
|
|
ret = vsi_idx;
|
|
goto unlock_pf;
|
|
|
|
err_rings:
|
|
pf->next_vsi = i - 1;
|
|
kfree(vsi);
|
|
unlock_pf:
|
|
mutex_unlock(&pf->switch_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
|
|
* @type: VSI pointer
|
|
* @free_qvectors: a bool to specify if q_vectors need to be freed.
|
|
*
|
|
* On error: returns error code (negative)
|
|
* On success: returns 0
|
|
**/
|
|
static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
|
|
{
|
|
/* free the ring and vector containers */
|
|
if (free_qvectors) {
|
|
kfree(vsi->q_vectors);
|
|
vsi->q_vectors = NULL;
|
|
}
|
|
kfree(vsi->tx_rings);
|
|
vsi->tx_rings = NULL;
|
|
vsi->rx_rings = NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_clear - Deallocate the VSI provided
|
|
* @vsi: the VSI being un-configured
|
|
**/
|
|
static int i40e_vsi_clear(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf;
|
|
|
|
if (!vsi)
|
|
return 0;
|
|
|
|
if (!vsi->back)
|
|
goto free_vsi;
|
|
pf = vsi->back;
|
|
|
|
mutex_lock(&pf->switch_mutex);
|
|
if (!pf->vsi[vsi->idx]) {
|
|
dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n",
|
|
vsi->idx, vsi->idx, vsi, vsi->type);
|
|
goto unlock_vsi;
|
|
}
|
|
|
|
if (pf->vsi[vsi->idx] != vsi) {
|
|
dev_err(&pf->pdev->dev,
|
|
"pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n",
|
|
pf->vsi[vsi->idx]->idx,
|
|
pf->vsi[vsi->idx],
|
|
pf->vsi[vsi->idx]->type,
|
|
vsi->idx, vsi, vsi->type);
|
|
goto unlock_vsi;
|
|
}
|
|
|
|
/* updates the pf for this cleared vsi */
|
|
i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
|
|
i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
|
|
|
|
i40e_vsi_free_arrays(vsi, true);
|
|
|
|
pf->vsi[vsi->idx] = NULL;
|
|
if (vsi->idx < pf->next_vsi)
|
|
pf->next_vsi = vsi->idx;
|
|
|
|
unlock_vsi:
|
|
mutex_unlock(&pf->switch_mutex);
|
|
free_vsi:
|
|
kfree(vsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_clear_rings - Deallocates the Rx and Tx rings for the provided VSI
|
|
* @vsi: the VSI being cleaned
|
|
**/
|
|
static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
|
|
{
|
|
int i;
|
|
|
|
if (vsi->tx_rings[0]) {
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
kfree_rcu(vsi->tx_rings[i], rcu);
|
|
vsi->tx_rings[i] = NULL;
|
|
vsi->rx_rings[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_alloc_rings - Allocates the Rx and Tx rings for the provided VSI
|
|
* @vsi: the VSI being configured
|
|
**/
|
|
static int i40e_alloc_rings(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
int i;
|
|
|
|
/* Set basic values in the rings to be used later during open() */
|
|
for (i = 0; i < vsi->num_queue_pairs; i++) {
|
|
struct i40e_ring *tx_ring;
|
|
struct i40e_ring *rx_ring;
|
|
|
|
/* allocate space for both Tx and Rx in one shot */
|
|
tx_ring = kzalloc(sizeof(struct i40e_ring) * 2, GFP_KERNEL);
|
|
if (!tx_ring)
|
|
goto err_out;
|
|
|
|
tx_ring->queue_index = i;
|
|
tx_ring->reg_idx = vsi->base_queue + i;
|
|
tx_ring->ring_active = false;
|
|
tx_ring->vsi = vsi;
|
|
tx_ring->netdev = vsi->netdev;
|
|
tx_ring->dev = &pf->pdev->dev;
|
|
tx_ring->count = vsi->num_desc;
|
|
tx_ring->size = 0;
|
|
tx_ring->dcb_tc = 0;
|
|
vsi->tx_rings[i] = tx_ring;
|
|
|
|
rx_ring = &tx_ring[1];
|
|
rx_ring->queue_index = i;
|
|
rx_ring->reg_idx = vsi->base_queue + i;
|
|
rx_ring->ring_active = false;
|
|
rx_ring->vsi = vsi;
|
|
rx_ring->netdev = vsi->netdev;
|
|
rx_ring->dev = &pf->pdev->dev;
|
|
rx_ring->count = vsi->num_desc;
|
|
rx_ring->size = 0;
|
|
rx_ring->dcb_tc = 0;
|
|
if (pf->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED)
|
|
set_ring_16byte_desc_enabled(rx_ring);
|
|
else
|
|
clear_ring_16byte_desc_enabled(rx_ring);
|
|
vsi->rx_rings[i] = rx_ring;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
i40e_vsi_clear_rings(vsi);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* i40e_reserve_msix_vectors - Reserve MSI-X vectors in the kernel
|
|
* @pf: board private structure
|
|
* @vectors: the number of MSI-X vectors to request
|
|
*
|
|
* Returns the number of vectors reserved, or error
|
|
**/
|
|
static int i40e_reserve_msix_vectors(struct i40e_pf *pf, int vectors)
|
|
{
|
|
int err = 0;
|
|
|
|
pf->num_msix_entries = 0;
|
|
while (vectors >= I40E_MIN_MSIX) {
|
|
err = pci_enable_msix(pf->pdev, pf->msix_entries, vectors);
|
|
if (err == 0) {
|
|
/* good to go */
|
|
pf->num_msix_entries = vectors;
|
|
break;
|
|
} else if (err < 0) {
|
|
/* total failure */
|
|
dev_info(&pf->pdev->dev,
|
|
"MSI-X vector reservation failed: %d\n", err);
|
|
vectors = 0;
|
|
break;
|
|
} else {
|
|
/* err > 0 is the hint for retry */
|
|
dev_info(&pf->pdev->dev,
|
|
"MSI-X vectors wanted %d, retrying with %d\n",
|
|
vectors, err);
|
|
vectors = err;
|
|
}
|
|
}
|
|
|
|
if (vectors > 0 && vectors < I40E_MIN_MSIX) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Couldn't get enough vectors, only %d available\n",
|
|
vectors);
|
|
vectors = 0;
|
|
}
|
|
|
|
return vectors;
|
|
}
|
|
|
|
/**
|
|
* i40e_init_msix - Setup the MSIX capability
|
|
* @pf: board private structure
|
|
*
|
|
* Work with the OS to set up the MSIX vectors needed.
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int i40e_init_msix(struct i40e_pf *pf)
|
|
{
|
|
i40e_status err = 0;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int v_budget, i;
|
|
int vec;
|
|
|
|
if (!(pf->flags & I40E_FLAG_MSIX_ENABLED))
|
|
return -ENODEV;
|
|
|
|
/* The number of vectors we'll request will be comprised of:
|
|
* - Add 1 for "other" cause for Admin Queue events, etc.
|
|
* - The number of LAN queue pairs
|
|
* - Queues being used for RSS.
|
|
* We don't need as many as max_rss_size vectors.
|
|
* use rss_size instead in the calculation since that
|
|
* is governed by number of cpus in the system.
|
|
* - assumes symmetric Tx/Rx pairing
|
|
* - The number of VMDq pairs
|
|
* Once we count this up, try the request.
|
|
*
|
|
* If we can't get what we want, we'll simplify to nearly nothing
|
|
* and try again. If that still fails, we punt.
|
|
*/
|
|
pf->num_lan_msix = pf->num_lan_qps - (pf->rss_size_max - pf->rss_size);
|
|
pf->num_vmdq_msix = pf->num_vmdq_qps;
|
|
v_budget = 1 + pf->num_lan_msix;
|
|
v_budget += (pf->num_vmdq_vsis * pf->num_vmdq_msix);
|
|
if (pf->flags & I40E_FLAG_FDIR_ENABLED)
|
|
v_budget++;
|
|
|
|
/* Scale down if necessary, and the rings will share vectors */
|
|
v_budget = min_t(int, v_budget, hw->func_caps.num_msix_vectors);
|
|
|
|
pf->msix_entries = kcalloc(v_budget, sizeof(struct msix_entry),
|
|
GFP_KERNEL);
|
|
if (!pf->msix_entries)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < v_budget; i++)
|
|
pf->msix_entries[i].entry = i;
|
|
vec = i40e_reserve_msix_vectors(pf, v_budget);
|
|
if (vec < I40E_MIN_MSIX) {
|
|
pf->flags &= ~I40E_FLAG_MSIX_ENABLED;
|
|
kfree(pf->msix_entries);
|
|
pf->msix_entries = NULL;
|
|
return -ENODEV;
|
|
|
|
} else if (vec == I40E_MIN_MSIX) {
|
|
/* Adjust for minimal MSIX use */
|
|
dev_info(&pf->pdev->dev, "Features disabled, not enough MSIX vectors\n");
|
|
pf->flags &= ~I40E_FLAG_VMDQ_ENABLED;
|
|
pf->num_vmdq_vsis = 0;
|
|
pf->num_vmdq_qps = 0;
|
|
pf->num_vmdq_msix = 0;
|
|
pf->num_lan_qps = 1;
|
|
pf->num_lan_msix = 1;
|
|
|
|
} else if (vec != v_budget) {
|
|
/* Scale vector usage down */
|
|
pf->num_vmdq_msix = 1; /* force VMDqs to only one vector */
|
|
vec--; /* reserve the misc vector */
|
|
|
|
/* partition out the remaining vectors */
|
|
switch (vec) {
|
|
case 2:
|
|
pf->num_vmdq_vsis = 1;
|
|
pf->num_lan_msix = 1;
|
|
break;
|
|
case 3:
|
|
pf->num_vmdq_vsis = 1;
|
|
pf->num_lan_msix = 2;
|
|
break;
|
|
default:
|
|
pf->num_lan_msix = min_t(int, (vec / 2),
|
|
pf->num_lan_qps);
|
|
pf->num_vmdq_vsis = min_t(int, (vec - pf->num_lan_msix),
|
|
I40E_DEFAULT_NUM_VMDQ_VSI);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_alloc_q_vector - Allocate memory for a single interrupt vector
|
|
* @vsi: the VSI being configured
|
|
* @v_idx: index of the vector in the vsi struct
|
|
*
|
|
* We allocate one q_vector. If allocation fails we return -ENOMEM.
|
|
**/
|
|
static int i40e_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
|
|
{
|
|
struct i40e_q_vector *q_vector;
|
|
|
|
/* allocate q_vector */
|
|
q_vector = kzalloc(sizeof(struct i40e_q_vector), GFP_KERNEL);
|
|
if (!q_vector)
|
|
return -ENOMEM;
|
|
|
|
q_vector->vsi = vsi;
|
|
q_vector->v_idx = v_idx;
|
|
cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
|
|
if (vsi->netdev)
|
|
netif_napi_add(vsi->netdev, &q_vector->napi,
|
|
i40e_napi_poll, vsi->work_limit);
|
|
|
|
q_vector->rx.latency_range = I40E_LOW_LATENCY;
|
|
q_vector->tx.latency_range = I40E_LOW_LATENCY;
|
|
|
|
/* tie q_vector and vsi together */
|
|
vsi->q_vectors[v_idx] = q_vector;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_alloc_q_vectors - Allocate memory for interrupt vectors
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* We allocate one q_vector per queue interrupt. If allocation fails we
|
|
* return -ENOMEM.
|
|
**/
|
|
static int i40e_alloc_q_vectors(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
int v_idx, num_q_vectors;
|
|
int err;
|
|
|
|
/* if not MSIX, give the one vector only to the LAN VSI */
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
|
|
num_q_vectors = vsi->num_q_vectors;
|
|
else if (vsi == pf->vsi[pf->lan_vsi])
|
|
num_q_vectors = 1;
|
|
else
|
|
return -EINVAL;
|
|
|
|
for (v_idx = 0; v_idx < num_q_vectors; v_idx++) {
|
|
err = i40e_alloc_q_vector(vsi, v_idx);
|
|
if (err)
|
|
goto err_out;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
while (v_idx--)
|
|
i40e_free_q_vector(vsi, v_idx);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_init_interrupt_scheme - Determine proper interrupt scheme
|
|
* @pf: board private structure to initialize
|
|
**/
|
|
static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
|
|
{
|
|
int err = 0;
|
|
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
err = i40e_init_msix(pf);
|
|
if (err) {
|
|
pf->flags &= ~(I40E_FLAG_MSIX_ENABLED |
|
|
I40E_FLAG_RSS_ENABLED |
|
|
I40E_FLAG_MQ_ENABLED |
|
|
I40E_FLAG_DCB_ENABLED |
|
|
I40E_FLAG_SRIOV_ENABLED |
|
|
I40E_FLAG_FDIR_ENABLED |
|
|
I40E_FLAG_FDIR_ATR_ENABLED |
|
|
I40E_FLAG_VMDQ_ENABLED);
|
|
|
|
/* rework the queue expectations without MSIX */
|
|
i40e_determine_queue_usage(pf);
|
|
}
|
|
}
|
|
|
|
if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
|
|
(pf->flags & I40E_FLAG_MSI_ENABLED)) {
|
|
dev_info(&pf->pdev->dev, "MSIX not available, trying MSI\n");
|
|
err = pci_enable_msi(pf->pdev);
|
|
if (err) {
|
|
dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
|
|
pf->flags &= ~I40E_FLAG_MSI_ENABLED;
|
|
}
|
|
}
|
|
|
|
if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
|
|
dev_info(&pf->pdev->dev, "MSIX and MSI not available, falling back to Legacy IRQ\n");
|
|
|
|
/* track first vector for misc interrupts */
|
|
err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
|
|
}
|
|
|
|
/**
|
|
* i40e_setup_misc_vector - Setup the misc vector to handle non queue events
|
|
* @pf: board private structure
|
|
*
|
|
* This sets up the handler for MSIX 0, which is used to manage the
|
|
* non-queue interrupts, e.g. AdminQ and errors. This is not used
|
|
* when in MSI or Legacy interrupt mode.
|
|
**/
|
|
static int i40e_setup_misc_vector(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_hw *hw = &pf->hw;
|
|
int err = 0;
|
|
|
|
/* Only request the irq if this is the first time through, and
|
|
* not when we're rebuilding after a Reset
|
|
*/
|
|
if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
|
|
err = request_irq(pf->msix_entries[0].vector,
|
|
i40e_intr, 0, pf->misc_int_name, pf);
|
|
if (err) {
|
|
dev_info(&pf->pdev->dev,
|
|
"request_irq for msix_misc failed: %d\n", err);
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
|
|
i40e_enable_misc_int_causes(hw);
|
|
|
|
/* associate no queues to the misc vector */
|
|
wr32(hw, I40E_PFINT_LNKLST0, I40E_QUEUE_END_OF_LIST);
|
|
wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K);
|
|
|
|
i40e_flush(hw);
|
|
|
|
i40e_irq_dynamic_enable_icr0(pf);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_config_rss - Prepare for RSS if used
|
|
* @pf: board private structure
|
|
**/
|
|
static int i40e_config_rss(struct i40e_pf *pf)
|
|
{
|
|
const u64 default_hena =
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_SCTP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_TCP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV4) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_UDP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_TCP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_SCTP) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV6) |
|
|
((u64)1 << I40E_FILTER_PCTYPE_L2_PAYLOAD);
|
|
|
|
/* Set of random keys generated using kernel random number generator */
|
|
static const u32 seed[I40E_PFQF_HKEY_MAX_INDEX + 1] = {0x41b01687,
|
|
0x183cfd8c, 0xce880440, 0x580cbc3c, 0x35897377,
|
|
0x328b25e1, 0x4fa98922, 0xb7d90c14, 0xd5bad70d,
|
|
0xcd15a2c1, 0xe8580225, 0x4a1e9d11, 0xfe5731be};
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 lut = 0;
|
|
int i, j;
|
|
u64 hena;
|
|
|
|
/* Fill out hash function seed */
|
|
for (i = 0; i <= I40E_PFQF_HKEY_MAX_INDEX; i++)
|
|
wr32(hw, I40E_PFQF_HKEY(i), seed[i]);
|
|
|
|
/* By default we enable TCP/UDP with IPv4/IPv6 ptypes */
|
|
hena = (u64)rd32(hw, I40E_PFQF_HENA(0)) |
|
|
((u64)rd32(hw, I40E_PFQF_HENA(1)) << 32);
|
|
hena |= default_hena;
|
|
wr32(hw, I40E_PFQF_HENA(0), (u32)hena);
|
|
wr32(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
|
|
|
|
/* Populate the LUT with max no. of queues in round robin fashion */
|
|
for (i = 0, j = 0; i < pf->hw.func_caps.rss_table_size; i++, j++) {
|
|
|
|
/* The assumption is that lan qp count will be the highest
|
|
* qp count for any PF VSI that needs RSS.
|
|
* If multiple VSIs need RSS support, all the qp counts
|
|
* for those VSIs should be a power of 2 for RSS to work.
|
|
* If LAN VSI is the only consumer for RSS then this requirement
|
|
* is not necessary.
|
|
*/
|
|
if (j == pf->rss_size)
|
|
j = 0;
|
|
/* lut = 4-byte sliding window of 4 lut entries */
|
|
lut = (lut << 8) | (j &
|
|
((0x1 << pf->hw.func_caps.rss_table_entry_width) - 1));
|
|
/* On i = 3, we have 4 entries in lut; write to the register */
|
|
if ((i & 3) == 3)
|
|
wr32(hw, I40E_PFQF_HLUT(i >> 2), lut);
|
|
}
|
|
i40e_flush(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_reconfig_rss_queues - change number of queues for rss and rebuild
|
|
* @pf: board private structure
|
|
* @queue_count: the requested queue count for rss.
|
|
*
|
|
* returns 0 if rss is not enabled, if enabled returns the final rss queue
|
|
* count which may be different from the requested queue count.
|
|
**/
|
|
int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count)
|
|
{
|
|
if (!(pf->flags & I40E_FLAG_RSS_ENABLED))
|
|
return 0;
|
|
|
|
queue_count = min_t(int, queue_count, pf->rss_size_max);
|
|
queue_count = rounddown_pow_of_two(queue_count);
|
|
|
|
if (queue_count != pf->rss_size) {
|
|
if (pf->queues_left < (queue_count - pf->rss_size)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"Not enough queues to do RSS on %d queues: remaining queues %d\n",
|
|
queue_count, pf->queues_left);
|
|
return pf->rss_size;
|
|
}
|
|
i40e_prep_for_reset(pf);
|
|
|
|
pf->num_lan_qps += (queue_count - pf->rss_size);
|
|
pf->queues_left -= (queue_count - pf->rss_size);
|
|
pf->rss_size = queue_count;
|
|
|
|
i40e_reset_and_rebuild(pf, true);
|
|
i40e_config_rss(pf);
|
|
}
|
|
dev_info(&pf->pdev->dev, "RSS count: %d\n", pf->rss_size);
|
|
return pf->rss_size;
|
|
}
|
|
|
|
/**
|
|
* i40e_sw_init - Initialize general software structures (struct i40e_pf)
|
|
* @pf: board private structure to initialize
|
|
*
|
|
* i40e_sw_init initializes the Adapter private data structure.
|
|
* Fields are initialized based on PCI device information and
|
|
* OS network device settings (MTU size).
|
|
**/
|
|
static int i40e_sw_init(struct i40e_pf *pf)
|
|
{
|
|
int err = 0;
|
|
int size;
|
|
|
|
pf->msg_enable = netif_msg_init(I40E_DEFAULT_MSG_ENABLE,
|
|
(NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK));
|
|
pf->hw.debug_mask = pf->msg_enable | I40E_DEBUG_DIAG;
|
|
if (debug != -1 && debug != I40E_DEFAULT_MSG_ENABLE) {
|
|
if (I40E_DEBUG_USER & debug)
|
|
pf->hw.debug_mask = debug;
|
|
pf->msg_enable = netif_msg_init((debug & ~I40E_DEBUG_USER),
|
|
I40E_DEFAULT_MSG_ENABLE);
|
|
}
|
|
|
|
/* Set default capability flags */
|
|
pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
|
|
I40E_FLAG_MSI_ENABLED |
|
|
I40E_FLAG_MSIX_ENABLED |
|
|
I40E_FLAG_RX_PS_ENABLED |
|
|
I40E_FLAG_MQ_ENABLED |
|
|
I40E_FLAG_RX_1BUF_ENABLED;
|
|
|
|
/* Depending on PF configurations, it is possible that the RSS
|
|
* maximum might end up larger than the available queues
|
|
*/
|
|
pf->rss_size_max = 0x1 << pf->hw.func_caps.rss_table_entry_width;
|
|
pf->rss_size_max = min_t(int, pf->rss_size_max,
|
|
pf->hw.func_caps.num_tx_qp);
|
|
if (pf->hw.func_caps.rss) {
|
|
pf->flags |= I40E_FLAG_RSS_ENABLED;
|
|
pf->rss_size = min_t(int, pf->rss_size_max, num_online_cpus());
|
|
} else {
|
|
pf->rss_size = 1;
|
|
}
|
|
|
|
if (pf->hw.func_caps.dcb)
|
|
pf->num_tc_qps = I40E_DEFAULT_QUEUES_PER_TC;
|
|
else
|
|
pf->num_tc_qps = 0;
|
|
|
|
if (pf->hw.func_caps.fd) {
|
|
/* FW/NVM is not yet fixed in this regard */
|
|
if ((pf->hw.func_caps.fd_filters_guaranteed > 0) ||
|
|
(pf->hw.func_caps.fd_filters_best_effort > 0)) {
|
|
pf->flags |= I40E_FLAG_FDIR_ATR_ENABLED;
|
|
dev_info(&pf->pdev->dev,
|
|
"Flow Director ATR mode Enabled\n");
|
|
pf->flags |= I40E_FLAG_FDIR_ENABLED;
|
|
dev_info(&pf->pdev->dev,
|
|
"Flow Director Side Band mode Enabled\n");
|
|
pf->fdir_pf_filter_count =
|
|
pf->hw.func_caps.fd_filters_guaranteed;
|
|
}
|
|
} else {
|
|
pf->fdir_pf_filter_count = 0;
|
|
}
|
|
|
|
if (pf->hw.func_caps.vmdq) {
|
|
pf->flags |= I40E_FLAG_VMDQ_ENABLED;
|
|
pf->num_vmdq_vsis = I40E_DEFAULT_NUM_VMDQ_VSI;
|
|
pf->num_vmdq_qps = I40E_DEFAULT_QUEUES_PER_VMDQ;
|
|
}
|
|
|
|
/* MFP mode enabled */
|
|
if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
|
|
pf->flags |= I40E_FLAG_MFP_ENABLED;
|
|
dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
|
if (pf->hw.func_caps.num_vfs) {
|
|
pf->num_vf_qps = I40E_DEFAULT_QUEUES_PER_VF;
|
|
pf->flags |= I40E_FLAG_SRIOV_ENABLED;
|
|
pf->num_req_vfs = min_t(int,
|
|
pf->hw.func_caps.num_vfs,
|
|
I40E_MAX_VF_COUNT);
|
|
dev_info(&pf->pdev->dev,
|
|
"Number of VFs being requested for PF[%d] = %d\n",
|
|
pf->hw.pf_id, pf->num_req_vfs);
|
|
}
|
|
#endif /* CONFIG_PCI_IOV */
|
|
pf->eeprom_version = 0xDEAD;
|
|
pf->lan_veb = I40E_NO_VEB;
|
|
pf->lan_vsi = I40E_NO_VSI;
|
|
|
|
/* set up queue assignment tracking */
|
|
size = sizeof(struct i40e_lump_tracking)
|
|
+ (sizeof(u16) * pf->hw.func_caps.num_tx_qp);
|
|
pf->qp_pile = kzalloc(size, GFP_KERNEL);
|
|
if (!pf->qp_pile) {
|
|
err = -ENOMEM;
|
|
goto sw_init_done;
|
|
}
|
|
pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
|
|
pf->qp_pile->search_hint = 0;
|
|
|
|
/* set up vector assignment tracking */
|
|
size = sizeof(struct i40e_lump_tracking)
|
|
+ (sizeof(u16) * pf->hw.func_caps.num_msix_vectors);
|
|
pf->irq_pile = kzalloc(size, GFP_KERNEL);
|
|
if (!pf->irq_pile) {
|
|
kfree(pf->qp_pile);
|
|
err = -ENOMEM;
|
|
goto sw_init_done;
|
|
}
|
|
pf->irq_pile->num_entries = pf->hw.func_caps.num_msix_vectors;
|
|
pf->irq_pile->search_hint = 0;
|
|
|
|
mutex_init(&pf->switch_mutex);
|
|
|
|
sw_init_done:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_set_features - set the netdev feature flags
|
|
* @netdev: ptr to the netdev being adjusted
|
|
* @features: the feature set that the stack is suggesting
|
|
**/
|
|
static int i40e_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
|
|
if (features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
i40e_vlan_stripping_enable(vsi);
|
|
else
|
|
i40e_vlan_stripping_disable(vsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
/**
|
|
* i40e_get_vxlan_port_idx - Lookup a possibly offloaded for Rx UDP port
|
|
* @pf: board private structure
|
|
* @port: The UDP port to look up
|
|
*
|
|
* Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
|
|
**/
|
|
static u8 i40e_get_vxlan_port_idx(struct i40e_pf *pf, __be16 port)
|
|
{
|
|
u8 i;
|
|
|
|
for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
|
|
if (pf->vxlan_ports[i] == port)
|
|
return i;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
/**
|
|
* i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
|
|
* @netdev: This physical port's netdev
|
|
* @sa_family: Socket Family that VXLAN is notifying us about
|
|
* @port: New UDP port number that VXLAN started listening to
|
|
**/
|
|
static void i40e_add_vxlan_port(struct net_device *netdev,
|
|
sa_family_t sa_family, __be16 port)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
u8 next_idx;
|
|
u8 idx;
|
|
|
|
if (sa_family == AF_INET6)
|
|
return;
|
|
|
|
idx = i40e_get_vxlan_port_idx(pf, port);
|
|
|
|
/* Check if port already exists */
|
|
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
|
|
netdev_info(netdev, "Port %d already offloaded\n", ntohs(port));
|
|
return;
|
|
}
|
|
|
|
/* Now check if there is space to add the new port */
|
|
next_idx = i40e_get_vxlan_port_idx(pf, 0);
|
|
|
|
if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
|
|
netdev_info(netdev, "Maximum number of UDP ports reached, not adding port %d\n",
|
|
ntohs(port));
|
|
return;
|
|
}
|
|
|
|
/* New port: add it and mark its index in the bitmap */
|
|
pf->vxlan_ports[next_idx] = port;
|
|
pf->pending_vxlan_bitmap |= (1 << next_idx);
|
|
|
|
pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
|
|
}
|
|
|
|
/**
|
|
* i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
|
|
* @netdev: This physical port's netdev
|
|
* @sa_family: Socket Family that VXLAN is notifying us about
|
|
* @port: UDP port number that VXLAN stopped listening to
|
|
**/
|
|
static void i40e_del_vxlan_port(struct net_device *netdev,
|
|
sa_family_t sa_family, __be16 port)
|
|
{
|
|
struct i40e_netdev_priv *np = netdev_priv(netdev);
|
|
struct i40e_vsi *vsi = np->vsi;
|
|
struct i40e_pf *pf = vsi->back;
|
|
u8 idx;
|
|
|
|
if (sa_family == AF_INET6)
|
|
return;
|
|
|
|
idx = i40e_get_vxlan_port_idx(pf, port);
|
|
|
|
/* Check if port already exists */
|
|
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
|
|
/* if port exists, set it to 0 (mark for deletion)
|
|
* and make it pending
|
|
*/
|
|
pf->vxlan_ports[idx] = 0;
|
|
|
|
pf->pending_vxlan_bitmap |= (1 << idx);
|
|
|
|
pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
|
|
} else {
|
|
netdev_warn(netdev, "Port %d was not found, not deleting\n",
|
|
ntohs(port));
|
|
}
|
|
}
|
|
|
|
#endif
|
|
static const struct net_device_ops i40e_netdev_ops = {
|
|
.ndo_open = i40e_open,
|
|
.ndo_stop = i40e_close,
|
|
.ndo_start_xmit = i40e_lan_xmit_frame,
|
|
.ndo_get_stats64 = i40e_get_netdev_stats_struct,
|
|
.ndo_set_rx_mode = i40e_set_rx_mode,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = i40e_set_mac,
|
|
.ndo_change_mtu = i40e_change_mtu,
|
|
.ndo_tx_timeout = i40e_tx_timeout,
|
|
.ndo_vlan_rx_add_vid = i40e_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = i40e_vlan_rx_kill_vid,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = i40e_netpoll,
|
|
#endif
|
|
.ndo_setup_tc = i40e_setup_tc,
|
|
.ndo_set_features = i40e_set_features,
|
|
.ndo_set_vf_mac = i40e_ndo_set_vf_mac,
|
|
.ndo_set_vf_vlan = i40e_ndo_set_vf_port_vlan,
|
|
.ndo_set_vf_tx_rate = i40e_ndo_set_vf_bw,
|
|
.ndo_get_vf_config = i40e_ndo_get_vf_config,
|
|
#ifdef CONFIG_I40E_VXLAN
|
|
.ndo_add_vxlan_port = i40e_add_vxlan_port,
|
|
.ndo_del_vxlan_port = i40e_del_vxlan_port,
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* i40e_config_netdev - Setup the netdev flags
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static int i40e_config_netdev(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_netdev_priv *np;
|
|
struct net_device *netdev;
|
|
u8 mac_addr[ETH_ALEN];
|
|
int etherdev_size;
|
|
|
|
etherdev_size = sizeof(struct i40e_netdev_priv);
|
|
netdev = alloc_etherdev_mq(etherdev_size, vsi->alloc_queue_pairs);
|
|
if (!netdev)
|
|
return -ENOMEM;
|
|
|
|
vsi->netdev = netdev;
|
|
np = netdev_priv(netdev);
|
|
np->vsi = vsi;
|
|
|
|
netdev->hw_enc_features = NETIF_F_IP_CSUM |
|
|
NETIF_F_GSO_UDP_TUNNEL |
|
|
NETIF_F_TSO |
|
|
NETIF_F_SG;
|
|
|
|
netdev->features = NETIF_F_SG |
|
|
NETIF_F_IP_CSUM |
|
|
NETIF_F_SCTP_CSUM |
|
|
NETIF_F_HIGHDMA |
|
|
NETIF_F_GSO_UDP_TUNNEL |
|
|
NETIF_F_HW_VLAN_CTAG_TX |
|
|
NETIF_F_HW_VLAN_CTAG_RX |
|
|
NETIF_F_HW_VLAN_CTAG_FILTER |
|
|
NETIF_F_IPV6_CSUM |
|
|
NETIF_F_TSO |
|
|
NETIF_F_TSO6 |
|
|
NETIF_F_RXCSUM |
|
|
NETIF_F_RXHASH |
|
|
0;
|
|
|
|
/* copy netdev features into list of user selectable features */
|
|
netdev->hw_features |= netdev->features;
|
|
|
|
if (vsi->type == I40E_VSI_MAIN) {
|
|
SET_NETDEV_DEV(netdev, &pf->pdev->dev);
|
|
memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
|
|
} else {
|
|
/* relate the VSI_VMDQ name to the VSI_MAIN name */
|
|
snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
|
|
pf->vsi[pf->lan_vsi]->netdev->name);
|
|
random_ether_addr(mac_addr);
|
|
i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, false);
|
|
}
|
|
|
|
memcpy(netdev->dev_addr, mac_addr, ETH_ALEN);
|
|
memcpy(netdev->perm_addr, mac_addr, ETH_ALEN);
|
|
/* vlan gets same features (except vlan offload)
|
|
* after any tweaks for specific VSI types
|
|
*/
|
|
netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
|
|
NETIF_F_HW_VLAN_CTAG_RX |
|
|
NETIF_F_HW_VLAN_CTAG_FILTER);
|
|
netdev->priv_flags |= IFF_UNICAST_FLT;
|
|
netdev->priv_flags |= IFF_SUPP_NOFCS;
|
|
/* Setup netdev TC information */
|
|
i40e_vsi_config_netdev_tc(vsi, vsi->tc_config.enabled_tc);
|
|
|
|
netdev->netdev_ops = &i40e_netdev_ops;
|
|
netdev->watchdog_timeo = 5 * HZ;
|
|
i40e_set_ethtool_ops(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_delete - Delete a VSI from the switch
|
|
* @vsi: the VSI being removed
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static void i40e_vsi_delete(struct i40e_vsi *vsi)
|
|
{
|
|
/* remove default VSI is not allowed */
|
|
if (vsi == vsi->back->vsi[vsi->back->lan_vsi])
|
|
return;
|
|
|
|
/* there is no HW VSI for FDIR */
|
|
if (vsi->type == I40E_VSI_FDIR)
|
|
return;
|
|
|
|
i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* i40e_add_vsi - Add a VSI to the switch
|
|
* @vsi: the VSI being configured
|
|
*
|
|
* This initializes a VSI context depending on the VSI type to be added and
|
|
* passes it down to the add_vsi aq command.
|
|
**/
|
|
static int i40e_add_vsi(struct i40e_vsi *vsi)
|
|
{
|
|
int ret = -ENODEV;
|
|
struct i40e_mac_filter *f, *ftmp;
|
|
struct i40e_pf *pf = vsi->back;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
struct i40e_vsi_context ctxt;
|
|
u8 enabled_tc = 0x1; /* TC0 enabled */
|
|
int f_count = 0;
|
|
|
|
memset(&ctxt, 0, sizeof(ctxt));
|
|
switch (vsi->type) {
|
|
case I40E_VSI_MAIN:
|
|
/* The PF's main VSI is already setup as part of the
|
|
* device initialization, so we'll not bother with
|
|
* the add_vsi call, but we will retrieve the current
|
|
* VSI context.
|
|
*/
|
|
ctxt.seid = pf->main_vsi_seid;
|
|
ctxt.pf_num = pf->hw.pf_id;
|
|
ctxt.vf_num = 0;
|
|
ret = i40e_aq_get_vsi_params(&pf->hw, &ctxt, NULL);
|
|
ctxt.flags = I40E_AQ_VSI_TYPE_PF;
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"couldn't get pf vsi config, err %d, aq_err %d\n",
|
|
ret, pf->hw.aq.asq_last_status);
|
|
return -ENOENT;
|
|
}
|
|
memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
|
|
vsi->info.valid_sections = 0;
|
|
|
|
vsi->seid = ctxt.seid;
|
|
vsi->id = ctxt.vsi_number;
|
|
|
|
enabled_tc = i40e_pf_get_tc_map(pf);
|
|
|
|
/* MFP mode setup queue map and update VSI */
|
|
if (pf->flags & I40E_FLAG_MFP_ENABLED) {
|
|
memset(&ctxt, 0, sizeof(ctxt));
|
|
ctxt.seid = pf->main_vsi_seid;
|
|
ctxt.pf_num = pf->hw.pf_id;
|
|
ctxt.vf_num = 0;
|
|
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
|
|
ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"update vsi failed, aq_err=%d\n",
|
|
pf->hw.aq.asq_last_status);
|
|
ret = -ENOENT;
|
|
goto err;
|
|
}
|
|
/* update the local VSI info queue map */
|
|
i40e_vsi_update_queue_map(vsi, &ctxt);
|
|
vsi->info.valid_sections = 0;
|
|
} else {
|
|
/* Default/Main VSI is only enabled for TC0
|
|
* reconfigure it to enable all TCs that are
|
|
* available on the port in SFP mode.
|
|
*/
|
|
ret = i40e_vsi_config_tc(vsi, enabled_tc);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"failed to configure TCs for main VSI tc_map 0x%08x, err %d, aq_err %d\n",
|
|
enabled_tc, ret,
|
|
pf->hw.aq.asq_last_status);
|
|
ret = -ENOENT;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case I40E_VSI_FDIR:
|
|
/* no queue mapping or actual HW VSI needed */
|
|
vsi->info.valid_sections = 0;
|
|
vsi->seid = 0;
|
|
vsi->id = 0;
|
|
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
|
|
return 0;
|
|
break;
|
|
|
|
case I40E_VSI_VMDQ2:
|
|
ctxt.pf_num = hw->pf_id;
|
|
ctxt.vf_num = 0;
|
|
ctxt.uplink_seid = vsi->uplink_seid;
|
|
ctxt.connection_type = 0x1; /* regular data port */
|
|
ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
|
|
|
|
ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
|
|
|
|
/* This VSI is connected to VEB so the switch_id
|
|
* should be set to zero by default.
|
|
*/
|
|
ctxt.info.switch_id = 0;
|
|
ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_LOCAL_LB);
|
|
ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
|
|
|
|
/* Setup the VSI tx/rx queue map for TC0 only for now */
|
|
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
|
|
break;
|
|
|
|
case I40E_VSI_SRIOV:
|
|
ctxt.pf_num = hw->pf_id;
|
|
ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id;
|
|
ctxt.uplink_seid = vsi->uplink_seid;
|
|
ctxt.connection_type = 0x1; /* regular data port */
|
|
ctxt.flags = I40E_AQ_VSI_TYPE_VF;
|
|
|
|
ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
|
|
|
|
/* This VSI is connected to VEB so the switch_id
|
|
* should be set to zero by default.
|
|
*/
|
|
ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
|
|
|
|
ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
|
|
ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
|
|
/* Setup the VSI tx/rx queue map for TC0 only for now */
|
|
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
|
|
break;
|
|
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (vsi->type != I40E_VSI_MAIN) {
|
|
ret = i40e_aq_add_vsi(hw, &ctxt, NULL);
|
|
if (ret) {
|
|
dev_info(&vsi->back->pdev->dev,
|
|
"add vsi failed, aq_err=%d\n",
|
|
vsi->back->hw.aq.asq_last_status);
|
|
ret = -ENOENT;
|
|
goto err;
|
|
}
|
|
memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
|
|
vsi->info.valid_sections = 0;
|
|
vsi->seid = ctxt.seid;
|
|
vsi->id = ctxt.vsi_number;
|
|
}
|
|
|
|
/* If macvlan filters already exist, force them to get loaded */
|
|
list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
|
|
f->changed = true;
|
|
f_count++;
|
|
}
|
|
if (f_count) {
|
|
vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
|
|
pf->flags |= I40E_FLAG_FILTER_SYNC;
|
|
}
|
|
|
|
/* Update VSI BW information */
|
|
ret = i40e_vsi_get_bw_info(vsi);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"couldn't get vsi bw info, err %d, aq_err %d\n",
|
|
ret, pf->hw.aq.asq_last_status);
|
|
/* VSI is already added so not tearing that up */
|
|
ret = 0;
|
|
}
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_release - Delete a VSI and free its resources
|
|
* @vsi: the VSI being removed
|
|
*
|
|
* Returns 0 on success or < 0 on error
|
|
**/
|
|
int i40e_vsi_release(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_mac_filter *f, *ftmp;
|
|
struct i40e_veb *veb = NULL;
|
|
struct i40e_pf *pf;
|
|
u16 uplink_seid;
|
|
int i, n;
|
|
|
|
pf = vsi->back;
|
|
|
|
/* release of a VEB-owner or last VSI is not allowed */
|
|
if (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
|
|
dev_info(&pf->pdev->dev, "VSI %d has existing VEB %d\n",
|
|
vsi->seid, vsi->uplink_seid);
|
|
return -ENODEV;
|
|
}
|
|
if (vsi == pf->vsi[pf->lan_vsi] &&
|
|
!test_bit(__I40E_DOWN, &pf->state)) {
|
|
dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
uplink_seid = vsi->uplink_seid;
|
|
if (vsi->type != I40E_VSI_SRIOV) {
|
|
if (vsi->netdev_registered) {
|
|
vsi->netdev_registered = false;
|
|
if (vsi->netdev) {
|
|
/* results in a call to i40e_close() */
|
|
unregister_netdev(vsi->netdev);
|
|
free_netdev(vsi->netdev);
|
|
vsi->netdev = NULL;
|
|
}
|
|
} else {
|
|
if (!test_and_set_bit(__I40E_DOWN, &vsi->state))
|
|
i40e_down(vsi);
|
|
i40e_vsi_free_irq(vsi);
|
|
i40e_vsi_free_tx_resources(vsi);
|
|
i40e_vsi_free_rx_resources(vsi);
|
|
}
|
|
i40e_vsi_disable_irq(vsi);
|
|
}
|
|
|
|
list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list)
|
|
i40e_del_filter(vsi, f->macaddr, f->vlan,
|
|
f->is_vf, f->is_netdev);
|
|
i40e_sync_vsi_filters(vsi);
|
|
|
|
i40e_vsi_delete(vsi);
|
|
i40e_vsi_free_q_vectors(vsi);
|
|
i40e_vsi_clear_rings(vsi);
|
|
i40e_vsi_clear(vsi);
|
|
|
|
/* If this was the last thing on the VEB, except for the
|
|
* controlling VSI, remove the VEB, which puts the controlling
|
|
* VSI onto the next level down in the switch.
|
|
*
|
|
* Well, okay, there's one more exception here: don't remove
|
|
* the orphan VEBs yet. We'll wait for an explicit remove request
|
|
* from up the network stack.
|
|
*/
|
|
for (n = 0, i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (pf->vsi[i] &&
|
|
pf->vsi[i]->uplink_seid == uplink_seid &&
|
|
(pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
|
|
n++; /* count the VSIs */
|
|
}
|
|
}
|
|
for (i = 0; i < I40E_MAX_VEB; i++) {
|
|
if (!pf->veb[i])
|
|
continue;
|
|
if (pf->veb[i]->uplink_seid == uplink_seid)
|
|
n++; /* count the VEBs */
|
|
if (pf->veb[i]->seid == uplink_seid)
|
|
veb = pf->veb[i];
|
|
}
|
|
if (n == 0 && veb && veb->uplink_seid != 0)
|
|
i40e_veb_release(veb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_setup_vectors - Set up the q_vectors for the given VSI
|
|
* @vsi: ptr to the VSI
|
|
*
|
|
* This should only be called after i40e_vsi_mem_alloc() which allocates the
|
|
* corresponding SW VSI structure and initializes num_queue_pairs for the
|
|
* newly allocated VSI.
|
|
*
|
|
* Returns 0 on success or negative on failure
|
|
**/
|
|
static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
|
|
{
|
|
int ret = -ENOENT;
|
|
struct i40e_pf *pf = vsi->back;
|
|
|
|
if (vsi->q_vectors[0]) {
|
|
dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
|
|
vsi->seid);
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (vsi->base_vector) {
|
|
dev_info(&pf->pdev->dev,
|
|
"VSI %d has non-zero base vector %d\n",
|
|
vsi->seid, vsi->base_vector);
|
|
return -EEXIST;
|
|
}
|
|
|
|
ret = i40e_alloc_q_vectors(vsi);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"failed to allocate %d q_vector for VSI %d, ret=%d\n",
|
|
vsi->num_q_vectors, vsi->seid, ret);
|
|
vsi->num_q_vectors = 0;
|
|
goto vector_setup_out;
|
|
}
|
|
|
|
if (vsi->num_q_vectors)
|
|
vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
|
|
vsi->num_q_vectors, vsi->idx);
|
|
if (vsi->base_vector < 0) {
|
|
dev_info(&pf->pdev->dev,
|
|
"failed to get q tracking for VSI %d, err=%d\n",
|
|
vsi->seid, vsi->base_vector);
|
|
i40e_vsi_free_q_vectors(vsi);
|
|
ret = -ENOENT;
|
|
goto vector_setup_out;
|
|
}
|
|
|
|
vector_setup_out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_reinit_setup - return and reallocate resources for a VSI
|
|
* @vsi: pointer to the vsi.
|
|
*
|
|
* This re-allocates a vsi's queue resources.
|
|
*
|
|
* Returns pointer to the successfully allocated and configured VSI sw struct
|
|
* on success, otherwise returns NULL on failure.
|
|
**/
|
|
static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
|
|
{
|
|
struct i40e_pf *pf = vsi->back;
|
|
u8 enabled_tc;
|
|
int ret;
|
|
|
|
i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
|
|
i40e_vsi_clear_rings(vsi);
|
|
|
|
i40e_vsi_free_arrays(vsi, false);
|
|
i40e_set_num_rings_in_vsi(vsi);
|
|
ret = i40e_vsi_alloc_arrays(vsi, false);
|
|
if (ret)
|
|
goto err_vsi;
|
|
|
|
ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs, vsi->idx);
|
|
if (ret < 0) {
|
|
dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
|
|
vsi->seid, ret);
|
|
goto err_vsi;
|
|
}
|
|
vsi->base_queue = ret;
|
|
|
|
/* Update the FW view of the VSI. Force a reset of TC and queue
|
|
* layout configurations.
|
|
*/
|
|
enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
|
|
pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
|
|
pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
|
|
i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
|
|
|
|
/* assign it some queues */
|
|
ret = i40e_alloc_rings(vsi);
|
|
if (ret)
|
|
goto err_rings;
|
|
|
|
/* map all of the rings to the q_vectors */
|
|
i40e_vsi_map_rings_to_vectors(vsi);
|
|
return vsi;
|
|
|
|
err_rings:
|
|
i40e_vsi_free_q_vectors(vsi);
|
|
if (vsi->netdev_registered) {
|
|
vsi->netdev_registered = false;
|
|
unregister_netdev(vsi->netdev);
|
|
free_netdev(vsi->netdev);
|
|
vsi->netdev = NULL;
|
|
}
|
|
i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
|
|
err_vsi:
|
|
i40e_vsi_clear(vsi);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_vsi_setup - Set up a VSI by a given type
|
|
* @pf: board private structure
|
|
* @type: VSI type
|
|
* @uplink_seid: the switch element to link to
|
|
* @param1: usage depends upon VSI type. For VF types, indicates VF id
|
|
*
|
|
* This allocates the sw VSI structure and its queue resources, then add a VSI
|
|
* to the identified VEB.
|
|
*
|
|
* Returns pointer to the successfully allocated and configure VSI sw struct on
|
|
* success, otherwise returns NULL on failure.
|
|
**/
|
|
struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
|
|
u16 uplink_seid, u32 param1)
|
|
{
|
|
struct i40e_vsi *vsi = NULL;
|
|
struct i40e_veb *veb = NULL;
|
|
int ret, i;
|
|
int v_idx;
|
|
|
|
/* The requested uplink_seid must be either
|
|
* - the PF's port seid
|
|
* no VEB is needed because this is the PF
|
|
* or this is a Flow Director special case VSI
|
|
* - seid of an existing VEB
|
|
* - seid of a VSI that owns an existing VEB
|
|
* - seid of a VSI that doesn't own a VEB
|
|
* a new VEB is created and the VSI becomes the owner
|
|
* - seid of the PF VSI, which is what creates the first VEB
|
|
* this is a special case of the previous
|
|
*
|
|
* Find which uplink_seid we were given and create a new VEB if needed
|
|
*/
|
|
for (i = 0; i < I40E_MAX_VEB; i++) {
|
|
if (pf->veb[i] && pf->veb[i]->seid == uplink_seid) {
|
|
veb = pf->veb[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!veb && uplink_seid != pf->mac_seid) {
|
|
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (pf->vsi[i] && pf->vsi[i]->seid == uplink_seid) {
|
|
vsi = pf->vsi[i];
|
|
break;
|
|
}
|
|
}
|
|
if (!vsi) {
|
|
dev_info(&pf->pdev->dev, "no such uplink_seid %d\n",
|
|
uplink_seid);
|
|
return NULL;
|
|
}
|
|
|
|
if (vsi->uplink_seid == pf->mac_seid)
|
|
veb = i40e_veb_setup(pf, 0, pf->mac_seid, vsi->seid,
|
|
vsi->tc_config.enabled_tc);
|
|
else if ((vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
|
|
veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
|
|
vsi->tc_config.enabled_tc);
|
|
|
|
for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
|
|
if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
|
|
veb = pf->veb[i];
|
|
}
|
|
if (!veb) {
|
|
dev_info(&pf->pdev->dev, "couldn't add VEB\n");
|
|
return NULL;
|
|
}
|
|
|
|
vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
|
|
uplink_seid = veb->seid;
|
|
}
|
|
|
|
/* get vsi sw struct */
|
|
v_idx = i40e_vsi_mem_alloc(pf, type);
|
|
if (v_idx < 0)
|
|
goto err_alloc;
|
|
vsi = pf->vsi[v_idx];
|
|
vsi->type = type;
|
|
vsi->veb_idx = (veb ? veb->idx : I40E_NO_VEB);
|
|
|
|
if (type == I40E_VSI_MAIN)
|
|
pf->lan_vsi = v_idx;
|
|
else if (type == I40E_VSI_SRIOV)
|
|
vsi->vf_id = param1;
|
|
/* assign it some queues */
|
|
ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs, vsi->idx);
|
|
if (ret < 0) {
|
|
dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
|
|
vsi->seid, ret);
|
|
goto err_vsi;
|
|
}
|
|
vsi->base_queue = ret;
|
|
|
|
/* get a VSI from the hardware */
|
|
vsi->uplink_seid = uplink_seid;
|
|
ret = i40e_add_vsi(vsi);
|
|
if (ret)
|
|
goto err_vsi;
|
|
|
|
switch (vsi->type) {
|
|
/* setup the netdev if needed */
|
|
case I40E_VSI_MAIN:
|
|
case I40E_VSI_VMDQ2:
|
|
ret = i40e_config_netdev(vsi);
|
|
if (ret)
|
|
goto err_netdev;
|
|
ret = register_netdev(vsi->netdev);
|
|
if (ret)
|
|
goto err_netdev;
|
|
vsi->netdev_registered = true;
|
|
netif_carrier_off(vsi->netdev);
|
|
/* fall through */
|
|
|
|
case I40E_VSI_FDIR:
|
|
/* set up vectors and rings if needed */
|
|
ret = i40e_vsi_setup_vectors(vsi);
|
|
if (ret)
|
|
goto err_msix;
|
|
|
|
ret = i40e_alloc_rings(vsi);
|
|
if (ret)
|
|
goto err_rings;
|
|
|
|
/* map all of the rings to the q_vectors */
|
|
i40e_vsi_map_rings_to_vectors(vsi);
|
|
|
|
i40e_vsi_reset_stats(vsi);
|
|
break;
|
|
|
|
default:
|
|
/* no netdev or rings for the other VSI types */
|
|
break;
|
|
}
|
|
|
|
return vsi;
|
|
|
|
err_rings:
|
|
i40e_vsi_free_q_vectors(vsi);
|
|
err_msix:
|
|
if (vsi->netdev_registered) {
|
|
vsi->netdev_registered = false;
|
|
unregister_netdev(vsi->netdev);
|
|
free_netdev(vsi->netdev);
|
|
vsi->netdev = NULL;
|
|
}
|
|
err_netdev:
|
|
i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
|
|
err_vsi:
|
|
i40e_vsi_clear(vsi);
|
|
err_alloc:
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_get_bw_info - Query VEB BW information
|
|
* @veb: the veb to query
|
|
*
|
|
* Query the Tx scheduler BW configuration data for given VEB
|
|
**/
|
|
static int i40e_veb_get_bw_info(struct i40e_veb *veb)
|
|
{
|
|
struct i40e_aqc_query_switching_comp_ets_config_resp ets_data;
|
|
struct i40e_aqc_query_switching_comp_bw_config_resp bw_data;
|
|
struct i40e_pf *pf = veb->pf;
|
|
struct i40e_hw *hw = &pf->hw;
|
|
u32 tc_bw_max;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
ret = i40e_aq_query_switch_comp_bw_config(hw, veb->seid,
|
|
&bw_data, NULL);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"query veb bw config failed, aq_err=%d\n",
|
|
hw->aq.asq_last_status);
|
|
goto out;
|
|
}
|
|
|
|
ret = i40e_aq_query_switch_comp_ets_config(hw, veb->seid,
|
|
&ets_data, NULL);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"query veb bw ets config failed, aq_err=%d\n",
|
|
hw->aq.asq_last_status);
|
|
goto out;
|
|
}
|
|
|
|
veb->bw_limit = le16_to_cpu(ets_data.port_bw_limit);
|
|
veb->bw_max_quanta = ets_data.tc_bw_max;
|
|
veb->is_abs_credits = bw_data.absolute_credits_enable;
|
|
tc_bw_max = le16_to_cpu(bw_data.tc_bw_max[0]) |
|
|
(le16_to_cpu(bw_data.tc_bw_max[1]) << 16);
|
|
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
|
|
veb->bw_tc_share_credits[i] = bw_data.tc_bw_share_credits[i];
|
|
veb->bw_tc_limit_credits[i] =
|
|
le16_to_cpu(bw_data.tc_bw_limits[i]);
|
|
veb->bw_tc_max_quanta[i] = ((tc_bw_max >> (i*4)) & 0x7);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_mem_alloc - Allocates the next available struct veb in the PF
|
|
* @pf: board private structure
|
|
*
|
|
* On error: returns error code (negative)
|
|
* On success: returns vsi index in PF (positive)
|
|
**/
|
|
static int i40e_veb_mem_alloc(struct i40e_pf *pf)
|
|
{
|
|
int ret = -ENOENT;
|
|
struct i40e_veb *veb;
|
|
int i;
|
|
|
|
/* Need to protect the allocation of switch elements at the PF level */
|
|
mutex_lock(&pf->switch_mutex);
|
|
|
|
/* VEB list may be fragmented if VEB creation/destruction has
|
|
* been happening. We can afford to do a quick scan to look
|
|
* for any free slots in the list.
|
|
*
|
|
* find next empty veb slot, looping back around if necessary
|
|
*/
|
|
i = 0;
|
|
while ((i < I40E_MAX_VEB) && (pf->veb[i] != NULL))
|
|
i++;
|
|
if (i >= I40E_MAX_VEB) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc_veb; /* out of VEB slots! */
|
|
}
|
|
|
|
veb = kzalloc(sizeof(*veb), GFP_KERNEL);
|
|
if (!veb) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc_veb;
|
|
}
|
|
veb->pf = pf;
|
|
veb->idx = i;
|
|
veb->enabled_tc = 1;
|
|
|
|
pf->veb[i] = veb;
|
|
ret = i;
|
|
err_alloc_veb:
|
|
mutex_unlock(&pf->switch_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_switch_branch_release - Delete a branch of the switch tree
|
|
* @branch: where to start deleting
|
|
*
|
|
* This uses recursion to find the tips of the branch to be
|
|
* removed, deleting until we get back to and can delete this VEB.
|
|
**/
|
|
static void i40e_switch_branch_release(struct i40e_veb *branch)
|
|
{
|
|
struct i40e_pf *pf = branch->pf;
|
|
u16 branch_seid = branch->seid;
|
|
u16 veb_idx = branch->idx;
|
|
int i;
|
|
|
|
/* release any VEBs on this VEB - RECURSION */
|
|
for (i = 0; i < I40E_MAX_VEB; i++) {
|
|
if (!pf->veb[i])
|
|
continue;
|
|
if (pf->veb[i]->uplink_seid == branch->seid)
|
|
i40e_switch_branch_release(pf->veb[i]);
|
|
}
|
|
|
|
/* Release the VSIs on this VEB, but not the owner VSI.
|
|
*
|
|
* NOTE: Removing the last VSI on a VEB has the SIDE EFFECT of removing
|
|
* the VEB itself, so don't use (*branch) after this loop.
|
|
*/
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (!pf->vsi[i])
|
|
continue;
|
|
if (pf->vsi[i]->uplink_seid == branch_seid &&
|
|
(pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
|
|
i40e_vsi_release(pf->vsi[i]);
|
|
}
|
|
}
|
|
|
|
/* There's one corner case where the VEB might not have been
|
|
* removed, so double check it here and remove it if needed.
|
|
* This case happens if the veb was created from the debugfs
|
|
* commands and no VSIs were added to it.
|
|
*/
|
|
if (pf->veb[veb_idx])
|
|
i40e_veb_release(pf->veb[veb_idx]);
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_clear - remove veb struct
|
|
* @veb: the veb to remove
|
|
**/
|
|
static void i40e_veb_clear(struct i40e_veb *veb)
|
|
{
|
|
if (!veb)
|
|
return;
|
|
|
|
if (veb->pf) {
|
|
struct i40e_pf *pf = veb->pf;
|
|
|
|
mutex_lock(&pf->switch_mutex);
|
|
if (pf->veb[veb->idx] == veb)
|
|
pf->veb[veb->idx] = NULL;
|
|
mutex_unlock(&pf->switch_mutex);
|
|
}
|
|
|
|
kfree(veb);
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_release - Delete a VEB and free its resources
|
|
* @veb: the VEB being removed
|
|
**/
|
|
void i40e_veb_release(struct i40e_veb *veb)
|
|
{
|
|
struct i40e_vsi *vsi = NULL;
|
|
struct i40e_pf *pf;
|
|
int i, n = 0;
|
|
|
|
pf = veb->pf;
|
|
|
|
/* find the remaining VSI and check for extras */
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (pf->vsi[i] && pf->vsi[i]->uplink_seid == veb->seid) {
|
|
n++;
|
|
vsi = pf->vsi[i];
|
|
}
|
|
}
|
|
if (n != 1) {
|
|
dev_info(&pf->pdev->dev,
|
|
"can't remove VEB %d with %d VSIs left\n",
|
|
veb->seid, n);
|
|
return;
|
|
}
|
|
|
|
/* move the remaining VSI to uplink veb */
|
|
vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
|
|
if (veb->uplink_seid) {
|
|
vsi->uplink_seid = veb->uplink_seid;
|
|
if (veb->uplink_seid == pf->mac_seid)
|
|
vsi->veb_idx = I40E_NO_VEB;
|
|
else
|
|
vsi->veb_idx = veb->veb_idx;
|
|
} else {
|
|
/* floating VEB */
|
|
vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
|
|
vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
|
|
}
|
|
|
|
i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
|
|
i40e_veb_clear(veb);
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* i40e_add_veb - create the VEB in the switch
|
|
* @veb: the VEB to be instantiated
|
|
* @vsi: the controlling VSI
|
|
**/
|
|
static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
|
|
{
|
|
bool is_default = (vsi->idx == vsi->back->lan_vsi);
|
|
bool is_cloud = false;
|
|
int ret;
|
|
|
|
/* get a VEB from the hardware */
|
|
ret = i40e_aq_add_veb(&veb->pf->hw, veb->uplink_seid, vsi->seid,
|
|
veb->enabled_tc, is_default,
|
|
is_cloud, &veb->seid, NULL);
|
|
if (ret) {
|
|
dev_info(&veb->pf->pdev->dev,
|
|
"couldn't add VEB, err %d, aq_err %d\n",
|
|
ret, veb->pf->hw.aq.asq_last_status);
|
|
return -EPERM;
|
|
}
|
|
|
|
/* get statistics counter */
|
|
ret = i40e_aq_get_veb_parameters(&veb->pf->hw, veb->seid, NULL, NULL,
|
|
&veb->stats_idx, NULL, NULL, NULL);
|
|
if (ret) {
|
|
dev_info(&veb->pf->pdev->dev,
|
|
"couldn't get VEB statistics idx, err %d, aq_err %d\n",
|
|
ret, veb->pf->hw.aq.asq_last_status);
|
|
return -EPERM;
|
|
}
|
|
ret = i40e_veb_get_bw_info(veb);
|
|
if (ret) {
|
|
dev_info(&veb->pf->pdev->dev,
|
|
"couldn't get VEB bw info, err %d, aq_err %d\n",
|
|
ret, veb->pf->hw.aq.asq_last_status);
|
|
i40e_aq_delete_element(&veb->pf->hw, veb->seid, NULL);
|
|
return -ENOENT;
|
|
}
|
|
|
|
vsi->uplink_seid = veb->seid;
|
|
vsi->veb_idx = veb->idx;
|
|
vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_veb_setup - Set up a VEB
|
|
* @pf: board private structure
|
|
* @flags: VEB setup flags
|
|
* @uplink_seid: the switch element to link to
|
|
* @vsi_seid: the initial VSI seid
|
|
* @enabled_tc: Enabled TC bit-map
|
|
*
|
|
* This allocates the sw VEB structure and links it into the switch
|
|
* It is possible and legal for this to be a duplicate of an already
|
|
* existing VEB. It is also possible for both uplink and vsi seids
|
|
* to be zero, in order to create a floating VEB.
|
|
*
|
|
* Returns pointer to the successfully allocated VEB sw struct on
|
|
* success, otherwise returns NULL on failure.
|
|
**/
|
|
struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
|
|
u16 uplink_seid, u16 vsi_seid,
|
|
u8 enabled_tc)
|
|
{
|
|
struct i40e_veb *veb, *uplink_veb = NULL;
|
|
int vsi_idx, veb_idx;
|
|
int ret;
|
|
|
|
/* if one seid is 0, the other must be 0 to create a floating relay */
|
|
if ((uplink_seid == 0 || vsi_seid == 0) &&
|
|
(uplink_seid + vsi_seid != 0)) {
|
|
dev_info(&pf->pdev->dev,
|
|
"one, not both seid's are 0: uplink=%d vsi=%d\n",
|
|
uplink_seid, vsi_seid);
|
|
return NULL;
|
|
}
|
|
|
|
/* make sure there is such a vsi and uplink */
|
|
for (vsi_idx = 0; vsi_idx < pf->hw.func_caps.num_vsis; vsi_idx++)
|
|
if (pf->vsi[vsi_idx] && pf->vsi[vsi_idx]->seid == vsi_seid)
|
|
break;
|
|
if (vsi_idx >= pf->hw.func_caps.num_vsis && vsi_seid != 0) {
|
|
dev_info(&pf->pdev->dev, "vsi seid %d not found\n",
|
|
vsi_seid);
|
|
return NULL;
|
|
}
|
|
|
|
if (uplink_seid && uplink_seid != pf->mac_seid) {
|
|
for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
|
|
if (pf->veb[veb_idx] &&
|
|
pf->veb[veb_idx]->seid == uplink_seid) {
|
|
uplink_veb = pf->veb[veb_idx];
|
|
break;
|
|
}
|
|
}
|
|
if (!uplink_veb) {
|
|
dev_info(&pf->pdev->dev,
|
|
"uplink seid %d not found\n", uplink_seid);
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
/* get veb sw struct */
|
|
veb_idx = i40e_veb_mem_alloc(pf);
|
|
if (veb_idx < 0)
|
|
goto err_alloc;
|
|
veb = pf->veb[veb_idx];
|
|
veb->flags = flags;
|
|
veb->uplink_seid = uplink_seid;
|
|
veb->veb_idx = (uplink_veb ? uplink_veb->idx : I40E_NO_VEB);
|
|
veb->enabled_tc = (enabled_tc ? enabled_tc : 0x1);
|
|
|
|
/* create the VEB in the switch */
|
|
ret = i40e_add_veb(veb, pf->vsi[vsi_idx]);
|
|
if (ret)
|
|
goto err_veb;
|
|
|
|
return veb;
|
|
|
|
err_veb:
|
|
i40e_veb_clear(veb);
|
|
err_alloc:
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* i40e_setup_pf_switch_element - set pf vars based on switch type
|
|
* @pf: board private structure
|
|
* @ele: element we are building info from
|
|
* @num_reported: total number of elements
|
|
* @printconfig: should we print the contents
|
|
*
|
|
* helper function to assist in extracting a few useful SEID values.
|
|
**/
|
|
static void i40e_setup_pf_switch_element(struct i40e_pf *pf,
|
|
struct i40e_aqc_switch_config_element_resp *ele,
|
|
u16 num_reported, bool printconfig)
|
|
{
|
|
u16 downlink_seid = le16_to_cpu(ele->downlink_seid);
|
|
u16 uplink_seid = le16_to_cpu(ele->uplink_seid);
|
|
u8 element_type = ele->element_type;
|
|
u16 seid = le16_to_cpu(ele->seid);
|
|
|
|
if (printconfig)
|
|
dev_info(&pf->pdev->dev,
|
|
"type=%d seid=%d uplink=%d downlink=%d\n",
|
|
element_type, seid, uplink_seid, downlink_seid);
|
|
|
|
switch (element_type) {
|
|
case I40E_SWITCH_ELEMENT_TYPE_MAC:
|
|
pf->mac_seid = seid;
|
|
break;
|
|
case I40E_SWITCH_ELEMENT_TYPE_VEB:
|
|
/* Main VEB? */
|
|
if (uplink_seid != pf->mac_seid)
|
|
break;
|
|
if (pf->lan_veb == I40E_NO_VEB) {
|
|
int v;
|
|
|
|
/* find existing or else empty VEB */
|
|
for (v = 0; v < I40E_MAX_VEB; v++) {
|
|
if (pf->veb[v] && (pf->veb[v]->seid == seid)) {
|
|
pf->lan_veb = v;
|
|
break;
|
|
}
|
|
}
|
|
if (pf->lan_veb == I40E_NO_VEB) {
|
|
v = i40e_veb_mem_alloc(pf);
|
|
if (v < 0)
|
|
break;
|
|
pf->lan_veb = v;
|
|
}
|
|
}
|
|
|
|
pf->veb[pf->lan_veb]->seid = seid;
|
|
pf->veb[pf->lan_veb]->uplink_seid = pf->mac_seid;
|
|
pf->veb[pf->lan_veb]->pf = pf;
|
|
pf->veb[pf->lan_veb]->veb_idx = I40E_NO_VEB;
|
|
break;
|
|
case I40E_SWITCH_ELEMENT_TYPE_VSI:
|
|
if (num_reported != 1)
|
|
break;
|
|
/* This is immediately after a reset so we can assume this is
|
|
* the PF's VSI
|
|
*/
|
|
pf->mac_seid = uplink_seid;
|
|
pf->pf_seid = downlink_seid;
|
|
pf->main_vsi_seid = seid;
|
|
if (printconfig)
|
|
dev_info(&pf->pdev->dev,
|
|
"pf_seid=%d main_vsi_seid=%d\n",
|
|
pf->pf_seid, pf->main_vsi_seid);
|
|
break;
|
|
case I40E_SWITCH_ELEMENT_TYPE_PF:
|
|
case I40E_SWITCH_ELEMENT_TYPE_VF:
|
|
case I40E_SWITCH_ELEMENT_TYPE_EMP:
|
|
case I40E_SWITCH_ELEMENT_TYPE_BMC:
|
|
case I40E_SWITCH_ELEMENT_TYPE_PE:
|
|
case I40E_SWITCH_ELEMENT_TYPE_PA:
|
|
/* ignore these for now */
|
|
break;
|
|
default:
|
|
dev_info(&pf->pdev->dev, "unknown element type=%d seid=%d\n",
|
|
element_type, seid);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i40e_fetch_switch_configuration - Get switch config from firmware
|
|
* @pf: board private structure
|
|
* @printconfig: should we print the contents
|
|
*
|
|
* Get the current switch configuration from the device and
|
|
* extract a few useful SEID values.
|
|
**/
|
|
int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
|
|
{
|
|
struct i40e_aqc_get_switch_config_resp *sw_config;
|
|
u16 next_seid = 0;
|
|
int ret = 0;
|
|
u8 *aq_buf;
|
|
int i;
|
|
|
|
aq_buf = kzalloc(I40E_AQ_LARGE_BUF, GFP_KERNEL);
|
|
if (!aq_buf)
|
|
return -ENOMEM;
|
|
|
|
sw_config = (struct i40e_aqc_get_switch_config_resp *)aq_buf;
|
|
do {
|
|
u16 num_reported, num_total;
|
|
|
|
ret = i40e_aq_get_switch_config(&pf->hw, sw_config,
|
|
I40E_AQ_LARGE_BUF,
|
|
&next_seid, NULL);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"get switch config failed %d aq_err=%x\n",
|
|
ret, pf->hw.aq.asq_last_status);
|
|
kfree(aq_buf);
|
|
return -ENOENT;
|
|
}
|
|
|
|
num_reported = le16_to_cpu(sw_config->header.num_reported);
|
|
num_total = le16_to_cpu(sw_config->header.num_total);
|
|
|
|
if (printconfig)
|
|
dev_info(&pf->pdev->dev,
|
|
"header: %d reported %d total\n",
|
|
num_reported, num_total);
|
|
|
|
if (num_reported) {
|
|
int sz = sizeof(*sw_config) * num_reported;
|
|
|
|
kfree(pf->sw_config);
|
|
pf->sw_config = kzalloc(sz, GFP_KERNEL);
|
|
if (pf->sw_config)
|
|
memcpy(pf->sw_config, sw_config, sz);
|
|
}
|
|
|
|
for (i = 0; i < num_reported; i++) {
|
|
struct i40e_aqc_switch_config_element_resp *ele =
|
|
&sw_config->element[i];
|
|
|
|
i40e_setup_pf_switch_element(pf, ele, num_reported,
|
|
printconfig);
|
|
}
|
|
} while (next_seid != 0);
|
|
|
|
kfree(aq_buf);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_setup_pf_switch - Setup the HW switch on startup or after reset
|
|
* @pf: board private structure
|
|
* @reinit: if the Main VSI needs to re-initialized.
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
**/
|
|
static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
|
|
{
|
|
u32 rxfc = 0, txfc = 0, rxfc_reg;
|
|
int ret;
|
|
|
|
/* find out what's out there already */
|
|
ret = i40e_fetch_switch_configuration(pf, false);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev,
|
|
"couldn't fetch switch config, err %d, aq_err %d\n",
|
|
ret, pf->hw.aq.asq_last_status);
|
|
return ret;
|
|
}
|
|
i40e_pf_reset_stats(pf);
|
|
|
|
/* fdir VSI must happen first to be sure it gets queue 0, but only
|
|
* if there is enough room for the fdir VSI
|
|
*/
|
|
if (pf->num_lan_qps > 1)
|
|
i40e_fdir_setup(pf);
|
|
|
|
/* first time setup */
|
|
if (pf->lan_vsi == I40E_NO_VSI || reinit) {
|
|
struct i40e_vsi *vsi = NULL;
|
|
u16 uplink_seid;
|
|
|
|
/* Set up the PF VSI associated with the PF's main VSI
|
|
* that is already in the HW switch
|
|
*/
|
|
if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
|
|
uplink_seid = pf->veb[pf->lan_veb]->seid;
|
|
else
|
|
uplink_seid = pf->mac_seid;
|
|
if (pf->lan_vsi == I40E_NO_VSI)
|
|
vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, uplink_seid, 0);
|
|
else if (reinit)
|
|
vsi = i40e_vsi_reinit_setup(pf->vsi[pf->lan_vsi]);
|
|
if (!vsi) {
|
|
dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
|
|
i40e_fdir_teardown(pf);
|
|
return -EAGAIN;
|
|
}
|
|
/* accommodate kcompat by copying the main VSI queue count
|
|
* into the pf, since this newer code pushes the pf queue
|
|
* info down a level into a VSI
|
|
*/
|
|
pf->num_rx_queues = vsi->num_queue_pairs;
|
|
pf->num_tx_queues = vsi->num_queue_pairs;
|
|
} else {
|
|
/* force a reset of TC and queue layout configurations */
|
|
u8 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
|
|
pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
|
|
pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
|
|
i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
|
|
}
|
|
i40e_vlan_stripping_disable(pf->vsi[pf->lan_vsi]);
|
|
|
|
/* Setup static PF queue filter control settings */
|
|
ret = i40e_setup_pf_filter_control(pf);
|
|
if (ret) {
|
|
dev_info(&pf->pdev->dev, "setup_pf_filter_control failed: %d\n",
|
|
ret);
|
|
/* Failure here should not stop continuing other steps */
|
|
}
|
|
|
|
/* enable RSS in the HW, even for only one queue, as the stack can use
|
|
* the hash
|
|
*/
|
|
if ((pf->flags & I40E_FLAG_RSS_ENABLED))
|
|
i40e_config_rss(pf);
|
|
|
|
/* fill in link information and enable LSE reporting */
|
|
i40e_aq_get_link_info(&pf->hw, true, NULL, NULL);
|
|
i40e_link_event(pf);
|
|
|
|
/* Initialize user-specific link properties */
|
|
pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
|
|
I40E_AQ_AN_COMPLETED) ? true : false);
|
|
/* requested_mode is set in probe or by ethtool */
|
|
if (!pf->fc_autoneg_status)
|
|
goto no_autoneg;
|
|
|
|
if ((pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX) &&
|
|
(pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX))
|
|
pf->hw.fc.current_mode = I40E_FC_FULL;
|
|
else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX)
|
|
pf->hw.fc.current_mode = I40E_FC_TX_PAUSE;
|
|
else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX)
|
|
pf->hw.fc.current_mode = I40E_FC_RX_PAUSE;
|
|
else
|
|
pf->hw.fc.current_mode = I40E_FC_NONE;
|
|
|
|
/* sync the flow control settings with the auto-neg values */
|
|
switch (pf->hw.fc.current_mode) {
|
|
case I40E_FC_FULL:
|
|
txfc = 1;
|
|
rxfc = 1;
|
|
break;
|
|
case I40E_FC_TX_PAUSE:
|
|
txfc = 1;
|
|
rxfc = 0;
|
|
break;
|
|
case I40E_FC_RX_PAUSE:
|
|
txfc = 0;
|
|
rxfc = 1;
|
|
break;
|
|
case I40E_FC_NONE:
|
|
case I40E_FC_DEFAULT:
|
|
txfc = 0;
|
|
rxfc = 0;
|
|
break;
|
|
case I40E_FC_PFC:
|
|
/* TBD */
|
|
break;
|
|
/* no default case, we have to handle all possibilities here */
|
|
}
|
|
|
|
wr32(&pf->hw, I40E_PRTDCB_FCCFG, txfc << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
|
|
|
|
rxfc_reg = rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
|
|
~I40E_PRTDCB_MFLCN_RFCE_MASK;
|
|
rxfc_reg |= (rxfc << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
|
|
|
|
wr32(&pf->hw, I40E_PRTDCB_MFLCN, rxfc_reg);
|
|
|
|
goto fc_complete;
|
|
|
|
no_autoneg:
|
|
/* disable L2 flow control, user can turn it on if they wish */
|
|
wr32(&pf->hw, I40E_PRTDCB_FCCFG, 0);
|
|
wr32(&pf->hw, I40E_PRTDCB_MFLCN, rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
|
|
~I40E_PRTDCB_MFLCN_RFCE_MASK);
|
|
|
|
fc_complete:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i40e_set_rss_size - helper to set rss_size
|
|
* @pf: board private structure
|
|
* @queues_left: how many queues
|
|
*/
|
|
static u16 i40e_set_rss_size(struct i40e_pf *pf, int queues_left)
|
|
{
|
|
int num_tc0;
|
|
|
|
num_tc0 = min_t(int, queues_left, pf->rss_size_max);
|
|
num_tc0 = min_t(int, num_tc0, num_online_cpus());
|
|
num_tc0 = rounddown_pow_of_two(num_tc0);
|
|
|
|
return num_tc0;
|
|
}
|
|
|
|
/**
|
|
* i40e_determine_queue_usage - Work out queue distribution
|
|
* @pf: board private structure
|
|
**/
|
|
static void i40e_determine_queue_usage(struct i40e_pf *pf)
|
|
{
|
|
int accum_tc_size;
|
|
int queues_left;
|
|
|
|
pf->num_lan_qps = 0;
|
|
pf->num_tc_qps = rounddown_pow_of_two(pf->num_tc_qps);
|
|
accum_tc_size = (I40E_MAX_TRAFFIC_CLASS - 1) * pf->num_tc_qps;
|
|
|
|
/* Find the max queues to be put into basic use. We'll always be
|
|
* using TC0, whether or not DCB is running, and TC0 will get the
|
|
* big RSS set.
|
|
*/
|
|
queues_left = pf->hw.func_caps.num_tx_qp;
|
|
|
|
if (!((pf->flags & I40E_FLAG_MSIX_ENABLED) &&
|
|
(pf->flags & I40E_FLAG_MQ_ENABLED)) ||
|
|
!(pf->flags & (I40E_FLAG_RSS_ENABLED |
|
|
I40E_FLAG_FDIR_ENABLED | I40E_FLAG_DCB_ENABLED)) ||
|
|
(queues_left == 1)) {
|
|
|
|
/* one qp for PF, no queues for anything else */
|
|
queues_left = 0;
|
|
pf->rss_size = pf->num_lan_qps = 1;
|
|
|
|
/* make sure all the fancies are disabled */
|
|
pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
|
|
I40E_FLAG_MQ_ENABLED |
|
|
I40E_FLAG_FDIR_ENABLED |
|
|
I40E_FLAG_FDIR_ATR_ENABLED |
|
|
I40E_FLAG_DCB_ENABLED |
|
|
I40E_FLAG_SRIOV_ENABLED |
|
|
I40E_FLAG_VMDQ_ENABLED);
|
|
|
|
} else if (pf->flags & I40E_FLAG_RSS_ENABLED &&
|
|
!(pf->flags & I40E_FLAG_FDIR_ENABLED) &&
|
|
!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
|
|
pf->rss_size = i40e_set_rss_size(pf, queues_left);
|
|
|
|
queues_left -= pf->rss_size;
|
|
pf->num_lan_qps = pf->rss_size_max;
|
|
|
|
} else if (pf->flags & I40E_FLAG_RSS_ENABLED &&
|
|
!(pf->flags & I40E_FLAG_FDIR_ENABLED) &&
|
|
(pf->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
|
|
/* save num_tc_qps queues for TCs 1 thru 7 and the rest
|
|
* are set up for RSS in TC0
|
|
*/
|
|
queues_left -= accum_tc_size;
|
|
|
|
pf->rss_size = i40e_set_rss_size(pf, queues_left);
|
|
|
|
queues_left -= pf->rss_size;
|
|
if (queues_left < 0) {
|
|
dev_info(&pf->pdev->dev, "not enough queues for DCB\n");
|
|
return;
|
|
}
|
|
|
|
pf->num_lan_qps = pf->rss_size_max + accum_tc_size;
|
|
|
|
} else if (pf->flags & I40E_FLAG_RSS_ENABLED &&
|
|
(pf->flags & I40E_FLAG_FDIR_ENABLED) &&
|
|
!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
|
|
queues_left -= 1; /* save 1 queue for FD */
|
|
|
|
pf->rss_size = i40e_set_rss_size(pf, queues_left);
|
|
|
|
queues_left -= pf->rss_size;
|
|
if (queues_left < 0) {
|
|
dev_info(&pf->pdev->dev, "not enough queues for Flow Director\n");
|
|
return;
|
|
}
|
|
|
|
pf->num_lan_qps = pf->rss_size_max;
|
|
|
|
} else if (pf->flags & I40E_FLAG_RSS_ENABLED &&
|
|
(pf->flags & I40E_FLAG_FDIR_ENABLED) &&
|
|
(pf->flags & I40E_FLAG_DCB_ENABLED)) {
|
|
|
|
/* save 1 queue for TCs 1 thru 7,
|
|
* 1 queue for flow director,
|
|
* and the rest are set up for RSS in TC0
|
|
*/
|
|
queues_left -= 1;
|
|
queues_left -= accum_tc_size;
|
|
|
|
pf->rss_size = i40e_set_rss_size(pf, queues_left);
|
|
queues_left -= pf->rss_size;
|
|
if (queues_left < 0) {
|
|
dev_info(&pf->pdev->dev, "not enough queues for DCB and Flow Director\n");
|
|
return;
|
|
}
|
|
|
|
pf->num_lan_qps = pf->rss_size_max + accum_tc_size;
|
|
|
|
} else {
|
|
dev_info(&pf->pdev->dev,
|
|
"Invalid configuration, flags=0x%08llx\n", pf->flags);
|
|
return;
|
|
}
|
|
|
|
if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
|
|
pf->num_vf_qps && pf->num_req_vfs && queues_left) {
|
|
pf->num_req_vfs = min_t(int, pf->num_req_vfs, (queues_left /
|
|
pf->num_vf_qps));
|
|
queues_left -= (pf->num_req_vfs * pf->num_vf_qps);
|
|
}
|
|
|
|
if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
|
|
pf->num_vmdq_vsis && pf->num_vmdq_qps && queues_left) {
|
|
pf->num_vmdq_vsis = min_t(int, pf->num_vmdq_vsis,
|
|
(queues_left / pf->num_vmdq_qps));
|
|
queues_left -= (pf->num_vmdq_vsis * pf->num_vmdq_qps);
|
|
}
|
|
|
|
pf->queues_left = queues_left;
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* i40e_setup_pf_filter_control - Setup PF static filter control
|
|
* @pf: PF to be setup
|
|
*
|
|
* i40e_setup_pf_filter_control sets up a pf's initial filter control
|
|
* settings. If PE/FCoE are enabled then it will also set the per PF
|
|
* based filter sizes required for them. It also enables Flow director,
|
|
* ethertype and macvlan type filter settings for the pf.
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int i40e_setup_pf_filter_control(struct i40e_pf *pf)
|
|
{
|
|
struct i40e_filter_control_settings *settings = &pf->filter_settings;
|
|
|
|
settings->hash_lut_size = I40E_HASH_LUT_SIZE_128;
|
|
|
|
/* Flow Director is enabled */
|
|
if (pf->flags & (I40E_FLAG_FDIR_ENABLED | I40E_FLAG_FDIR_ATR_ENABLED))
|
|
settings->enable_fdir = true;
|
|
|
|
/* Ethtype and MACVLAN filters enabled for PF */
|
|
settings->enable_ethtype = true;
|
|
settings->enable_macvlan = true;
|
|
|
|
if (i40e_set_filter_control(&pf->hw, settings))
|
|
return -ENOENT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_probe - Device initialization routine
|
|
* @pdev: PCI device information struct
|
|
* @ent: entry in i40e_pci_tbl
|
|
*
|
|
* i40e_probe initializes a pf identified by a pci_dev structure.
|
|
* The OS initialization, configuring of the pf private structure,
|
|
* and a hardware reset occur.
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct i40e_driver_version dv;
|
|
struct i40e_pf *pf;
|
|
struct i40e_hw *hw;
|
|
static u16 pfs_found;
|
|
u16 link_status;
|
|
int err = 0;
|
|
u32 len;
|
|
|
|
err = pci_enable_device_mem(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* set up for high or low dma */
|
|
if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
|
|
/* coherent mask for the same size will always succeed if
|
|
* dma_set_mask does
|
|
*/
|
|
dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
|
|
} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
|
|
dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
} else {
|
|
dev_err(&pdev->dev, "DMA configuration failed: %d\n", err);
|
|
err = -EIO;
|
|
goto err_dma;
|
|
}
|
|
|
|
/* set up pci connections */
|
|
err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
|
|
IORESOURCE_MEM), i40e_driver_name);
|
|
if (err) {
|
|
dev_info(&pdev->dev,
|
|
"pci_request_selected_regions failed %d\n", err);
|
|
goto err_pci_reg;
|
|
}
|
|
|
|
pci_enable_pcie_error_reporting(pdev);
|
|
pci_set_master(pdev);
|
|
|
|
/* Now that we have a PCI connection, we need to do the
|
|
* low level device setup. This is primarily setting up
|
|
* the Admin Queue structures and then querying for the
|
|
* device's current profile information.
|
|
*/
|
|
pf = kzalloc(sizeof(*pf), GFP_KERNEL);
|
|
if (!pf) {
|
|
err = -ENOMEM;
|
|
goto err_pf_alloc;
|
|
}
|
|
pf->next_vsi = 0;
|
|
pf->pdev = pdev;
|
|
set_bit(__I40E_DOWN, &pf->state);
|
|
|
|
hw = &pf->hw;
|
|
hw->back = pf;
|
|
hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
if (!hw->hw_addr) {
|
|
err = -EIO;
|
|
dev_info(&pdev->dev, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
|
|
(unsigned int)pci_resource_start(pdev, 0),
|
|
(unsigned int)pci_resource_len(pdev, 0), err);
|
|
goto err_ioremap;
|
|
}
|
|
hw->vendor_id = pdev->vendor;
|
|
hw->device_id = pdev->device;
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
|
|
hw->subsystem_vendor_id = pdev->subsystem_vendor;
|
|
hw->subsystem_device_id = pdev->subsystem_device;
|
|
hw->bus.device = PCI_SLOT(pdev->devfn);
|
|
hw->bus.func = PCI_FUNC(pdev->devfn);
|
|
pf->instance = pfs_found;
|
|
|
|
/* do a special CORER for clearing PXE mode once at init */
|
|
if (hw->revision_id == 0 &&
|
|
(rd32(hw, I40E_GLLAN_RCTL_0) & I40E_GLLAN_RCTL_0_PXE_MODE_MASK)) {
|
|
wr32(hw, I40E_GLGEN_RTRIG, I40E_GLGEN_RTRIG_CORER_MASK);
|
|
i40e_flush(hw);
|
|
msleep(200);
|
|
pf->corer_count++;
|
|
|
|
i40e_clear_pxe_mode(hw);
|
|
}
|
|
|
|
/* Reset here to make sure all is clean and to define PF 'n' */
|
|
err = i40e_pf_reset(hw);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
|
|
goto err_pf_reset;
|
|
}
|
|
pf->pfr_count++;
|
|
|
|
hw->aq.num_arq_entries = I40E_AQ_LEN;
|
|
hw->aq.num_asq_entries = I40E_AQ_LEN;
|
|
hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
|
|
hw->aq.asq_buf_size = I40E_MAX_AQ_BUF_SIZE;
|
|
pf->adminq_work_limit = I40E_AQ_WORK_LIMIT;
|
|
snprintf(pf->misc_int_name, sizeof(pf->misc_int_name) - 1,
|
|
"%s-pf%d:misc",
|
|
dev_driver_string(&pf->pdev->dev), pf->hw.pf_id);
|
|
|
|
err = i40e_init_shared_code(hw);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "init_shared_code failed: %d\n", err);
|
|
goto err_pf_reset;
|
|
}
|
|
|
|
/* set up a default setting for link flow control */
|
|
pf->hw.fc.requested_mode = I40E_FC_NONE;
|
|
|
|
err = i40e_init_adminq(hw);
|
|
dev_info(&pdev->dev, "%s\n", i40e_fw_version_str(hw));
|
|
if (((hw->nvm.version & I40E_NVM_VERSION_HI_MASK)
|
|
>> I40E_NVM_VERSION_HI_SHIFT) != I40E_CURRENT_NVM_VERSION_HI) {
|
|
dev_info(&pdev->dev,
|
|
"warning: NVM version not supported, supported version: %02x.%02x\n",
|
|
I40E_CURRENT_NVM_VERSION_HI,
|
|
I40E_CURRENT_NVM_VERSION_LO);
|
|
}
|
|
if (err) {
|
|
dev_info(&pdev->dev,
|
|
"init_adminq failed: %d expecting API %02x.%02x\n",
|
|
err,
|
|
I40E_FW_API_VERSION_MAJOR, I40E_FW_API_VERSION_MINOR);
|
|
goto err_pf_reset;
|
|
}
|
|
|
|
err = i40e_get_capabilities(pf);
|
|
if (err)
|
|
goto err_adminq_setup;
|
|
|
|
err = i40e_sw_init(pf);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "sw_init failed: %d\n", err);
|
|
goto err_sw_init;
|
|
}
|
|
|
|
err = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
|
|
hw->func_caps.num_rx_qp,
|
|
pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "init_lan_hmc failed: %d\n", err);
|
|
goto err_init_lan_hmc;
|
|
}
|
|
|
|
err = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "configure_lan_hmc failed: %d\n", err);
|
|
err = -ENOENT;
|
|
goto err_configure_lan_hmc;
|
|
}
|
|
|
|
i40e_get_mac_addr(hw, hw->mac.addr);
|
|
if (i40e_validate_mac_addr(hw->mac.addr)) {
|
|
dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
|
|
err = -EIO;
|
|
goto err_mac_addr;
|
|
}
|
|
dev_info(&pdev->dev, "MAC address: %pM\n", hw->mac.addr);
|
|
memcpy(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN);
|
|
|
|
pci_set_drvdata(pdev, pf);
|
|
pci_save_state(pdev);
|
|
|
|
/* set up periodic task facility */
|
|
setup_timer(&pf->service_timer, i40e_service_timer, (unsigned long)pf);
|
|
pf->service_timer_period = HZ;
|
|
|
|
INIT_WORK(&pf->service_task, i40e_service_task);
|
|
clear_bit(__I40E_SERVICE_SCHED, &pf->state);
|
|
pf->flags |= I40E_FLAG_NEED_LINK_UPDATE;
|
|
pf->link_check_timeout = jiffies;
|
|
|
|
/* WoL defaults to disabled */
|
|
pf->wol_en = false;
|
|
device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
|
|
|
|
/* set up the main switch operations */
|
|
i40e_determine_queue_usage(pf);
|
|
i40e_init_interrupt_scheme(pf);
|
|
|
|
/* Set up the *vsi struct based on the number of VSIs in the HW,
|
|
* and set up our local tracking of the MAIN PF vsi.
|
|
*/
|
|
len = sizeof(struct i40e_vsi *) * pf->hw.func_caps.num_vsis;
|
|
pf->vsi = kzalloc(len, GFP_KERNEL);
|
|
if (!pf->vsi) {
|
|
err = -ENOMEM;
|
|
goto err_switch_setup;
|
|
}
|
|
|
|
err = i40e_setup_pf_switch(pf, false);
|
|
if (err) {
|
|
dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
|
|
goto err_vsis;
|
|
}
|
|
|
|
/* The main driver is (mostly) up and happy. We need to set this state
|
|
* before setting up the misc vector or we get a race and the vector
|
|
* ends up disabled forever.
|
|
*/
|
|
clear_bit(__I40E_DOWN, &pf->state);
|
|
|
|
/* In case of MSIX we are going to setup the misc vector right here
|
|
* to handle admin queue events etc. In case of legacy and MSI
|
|
* the misc functionality and queue processing is combined in
|
|
* the same vector and that gets setup at open.
|
|
*/
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
err = i40e_setup_misc_vector(pf);
|
|
if (err) {
|
|
dev_info(&pdev->dev,
|
|
"setup of misc vector failed: %d\n", err);
|
|
goto err_vsis;
|
|
}
|
|
}
|
|
|
|
/* prep for VF support */
|
|
if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
|
|
(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
|
|
u32 val;
|
|
|
|
/* disable link interrupts for VFs */
|
|
val = rd32(hw, I40E_PFGEN_PORTMDIO_NUM);
|
|
val &= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK;
|
|
wr32(hw, I40E_PFGEN_PORTMDIO_NUM, val);
|
|
i40e_flush(hw);
|
|
}
|
|
|
|
pfs_found++;
|
|
|
|
i40e_dbg_pf_init(pf);
|
|
|
|
/* tell the firmware that we're starting */
|
|
dv.major_version = DRV_VERSION_MAJOR;
|
|
dv.minor_version = DRV_VERSION_MINOR;
|
|
dv.build_version = DRV_VERSION_BUILD;
|
|
dv.subbuild_version = 0;
|
|
i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
|
|
|
|
/* since everything's happy, start the service_task timer */
|
|
mod_timer(&pf->service_timer,
|
|
round_jiffies(jiffies + pf->service_timer_period));
|
|
|
|
/* Get the negotiated link width and speed from PCI config space */
|
|
pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA, &link_status);
|
|
|
|
i40e_set_pci_config_data(hw, link_status);
|
|
|
|
dev_info(&pdev->dev, "PCI Express: %s %s\n",
|
|
(hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
|
|
hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
|
|
hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
|
|
"Unknown"),
|
|
(hw->bus.width == i40e_bus_width_pcie_x8 ? "Width x8" :
|
|
hw->bus.width == i40e_bus_width_pcie_x4 ? "Width x4" :
|
|
hw->bus.width == i40e_bus_width_pcie_x2 ? "Width x2" :
|
|
hw->bus.width == i40e_bus_width_pcie_x1 ? "Width x1" :
|
|
"Unknown"));
|
|
|
|
if (hw->bus.width < i40e_bus_width_pcie_x8 ||
|
|
hw->bus.speed < i40e_bus_speed_8000) {
|
|
dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
|
|
dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
/* Unwind what we've done if something failed in the setup */
|
|
err_vsis:
|
|
set_bit(__I40E_DOWN, &pf->state);
|
|
err_switch_setup:
|
|
i40e_clear_interrupt_scheme(pf);
|
|
kfree(pf->vsi);
|
|
del_timer_sync(&pf->service_timer);
|
|
err_mac_addr:
|
|
err_configure_lan_hmc:
|
|
(void)i40e_shutdown_lan_hmc(hw);
|
|
err_init_lan_hmc:
|
|
kfree(pf->qp_pile);
|
|
kfree(pf->irq_pile);
|
|
err_sw_init:
|
|
err_adminq_setup:
|
|
(void)i40e_shutdown_adminq(hw);
|
|
err_pf_reset:
|
|
iounmap(hw->hw_addr);
|
|
err_ioremap:
|
|
kfree(pf);
|
|
err_pf_alloc:
|
|
pci_disable_pcie_error_reporting(pdev);
|
|
pci_release_selected_regions(pdev,
|
|
pci_select_bars(pdev, IORESOURCE_MEM));
|
|
err_pci_reg:
|
|
err_dma:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* i40e_remove - Device removal routine
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* i40e_remove is called by the PCI subsystem to alert the driver
|
|
* that is should release a PCI device. This could be caused by a
|
|
* Hot-Plug event, or because the driver is going to be removed from
|
|
* memory.
|
|
**/
|
|
static void i40e_remove(struct pci_dev *pdev)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
i40e_status ret_code;
|
|
u32 reg;
|
|
int i;
|
|
|
|
i40e_dbg_pf_exit(pf);
|
|
|
|
if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
|
|
i40e_free_vfs(pf);
|
|
pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
|
|
}
|
|
|
|
/* no more scheduling of any task */
|
|
set_bit(__I40E_DOWN, &pf->state);
|
|
del_timer_sync(&pf->service_timer);
|
|
cancel_work_sync(&pf->service_task);
|
|
|
|
i40e_fdir_teardown(pf);
|
|
|
|
/* If there is a switch structure or any orphans, remove them.
|
|
* This will leave only the PF's VSI remaining.
|
|
*/
|
|
for (i = 0; i < I40E_MAX_VEB; i++) {
|
|
if (!pf->veb[i])
|
|
continue;
|
|
|
|
if (pf->veb[i]->uplink_seid == pf->mac_seid ||
|
|
pf->veb[i]->uplink_seid == 0)
|
|
i40e_switch_branch_release(pf->veb[i]);
|
|
}
|
|
|
|
/* Now we can shutdown the PF's VSI, just before we kill
|
|
* adminq and hmc.
|
|
*/
|
|
if (pf->vsi[pf->lan_vsi])
|
|
i40e_vsi_release(pf->vsi[pf->lan_vsi]);
|
|
|
|
i40e_stop_misc_vector(pf);
|
|
if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
|
|
synchronize_irq(pf->msix_entries[0].vector);
|
|
free_irq(pf->msix_entries[0].vector, pf);
|
|
}
|
|
|
|
/* shutdown and destroy the HMC */
|
|
ret_code = i40e_shutdown_lan_hmc(&pf->hw);
|
|
if (ret_code)
|
|
dev_warn(&pdev->dev,
|
|
"Failed to destroy the HMC resources: %d\n", ret_code);
|
|
|
|
/* shutdown the adminq */
|
|
i40e_aq_queue_shutdown(&pf->hw, true);
|
|
ret_code = i40e_shutdown_adminq(&pf->hw);
|
|
if (ret_code)
|
|
dev_warn(&pdev->dev,
|
|
"Failed to destroy the Admin Queue resources: %d\n",
|
|
ret_code);
|
|
|
|
/* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
|
|
i40e_clear_interrupt_scheme(pf);
|
|
for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
|
|
if (pf->vsi[i]) {
|
|
i40e_vsi_clear_rings(pf->vsi[i]);
|
|
i40e_vsi_clear(pf->vsi[i]);
|
|
pf->vsi[i] = NULL;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < I40E_MAX_VEB; i++) {
|
|
kfree(pf->veb[i]);
|
|
pf->veb[i] = NULL;
|
|
}
|
|
|
|
kfree(pf->qp_pile);
|
|
kfree(pf->irq_pile);
|
|
kfree(pf->sw_config);
|
|
kfree(pf->vsi);
|
|
|
|
/* force a PF reset to clean anything leftover */
|
|
reg = rd32(&pf->hw, I40E_PFGEN_CTRL);
|
|
wr32(&pf->hw, I40E_PFGEN_CTRL, (reg | I40E_PFGEN_CTRL_PFSWR_MASK));
|
|
i40e_flush(&pf->hw);
|
|
|
|
iounmap(pf->hw.hw_addr);
|
|
kfree(pf);
|
|
pci_release_selected_regions(pdev,
|
|
pci_select_bars(pdev, IORESOURCE_MEM));
|
|
|
|
pci_disable_pcie_error_reporting(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
/**
|
|
* i40e_pci_error_detected - warning that something funky happened in PCI land
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* Called to warn that something happened and the error handling steps
|
|
* are in progress. Allows the driver to quiesce things, be ready for
|
|
* remediation.
|
|
**/
|
|
static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev,
|
|
enum pci_channel_state error)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
|
|
dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
|
|
|
|
/* shutdown all operations */
|
|
if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
|
|
rtnl_lock();
|
|
i40e_prep_for_reset(pf);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/* Request a slot reset */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/**
|
|
* i40e_pci_error_slot_reset - a PCI slot reset just happened
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* Called to find if the driver can work with the device now that
|
|
* the pci slot has been reset. If a basic connection seems good
|
|
* (registers are readable and have sane content) then return a
|
|
* happy little PCI_ERS_RESULT_xxx.
|
|
**/
|
|
static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
pci_ers_result_t result;
|
|
int err;
|
|
u32 reg;
|
|
|
|
dev_info(&pdev->dev, "%s\n", __func__);
|
|
if (pci_enable_device_mem(pdev)) {
|
|
dev_info(&pdev->dev,
|
|
"Cannot re-enable PCI device after reset.\n");
|
|
result = PCI_ERS_RESULT_DISCONNECT;
|
|
} else {
|
|
pci_set_master(pdev);
|
|
pci_restore_state(pdev);
|
|
pci_save_state(pdev);
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
reg = rd32(&pf->hw, I40E_GLGEN_RTRIG);
|
|
if (reg == 0)
|
|
result = PCI_ERS_RESULT_RECOVERED;
|
|
else
|
|
result = PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
err = pci_cleanup_aer_uncorrect_error_status(pdev);
|
|
if (err) {
|
|
dev_info(&pdev->dev,
|
|
"pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
|
|
err);
|
|
/* non-fatal, continue */
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* i40e_pci_error_resume - restart operations after PCI error recovery
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* Called to allow the driver to bring things back up after PCI error
|
|
* and/or reset recovery has finished.
|
|
**/
|
|
static void i40e_pci_error_resume(struct pci_dev *pdev)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
|
|
dev_info(&pdev->dev, "%s\n", __func__);
|
|
if (test_bit(__I40E_SUSPENDED, &pf->state))
|
|
return;
|
|
|
|
rtnl_lock();
|
|
i40e_handle_reset_warning(pf);
|
|
rtnl_lock();
|
|
}
|
|
|
|
/**
|
|
* i40e_shutdown - PCI callback for shutting down
|
|
* @pdev: PCI device information struct
|
|
**/
|
|
static void i40e_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
struct i40e_hw *hw = &pf->hw;
|
|
|
|
set_bit(__I40E_SUSPENDED, &pf->state);
|
|
set_bit(__I40E_DOWN, &pf->state);
|
|
rtnl_lock();
|
|
i40e_prep_for_reset(pf);
|
|
rtnl_unlock();
|
|
|
|
wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
|
|
wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
|
|
|
|
if (system_state == SYSTEM_POWER_OFF) {
|
|
pci_wake_from_d3(pdev, pf->wol_en);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/**
|
|
* i40e_suspend - PCI callback for moving to D3
|
|
* @pdev: PCI device information struct
|
|
**/
|
|
static int i40e_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
struct i40e_hw *hw = &pf->hw;
|
|
|
|
set_bit(__I40E_SUSPENDED, &pf->state);
|
|
set_bit(__I40E_DOWN, &pf->state);
|
|
rtnl_lock();
|
|
i40e_prep_for_reset(pf);
|
|
rtnl_unlock();
|
|
|
|
wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
|
|
wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
|
|
|
|
pci_wake_from_d3(pdev, pf->wol_en);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i40e_resume - PCI callback for waking up from D3
|
|
* @pdev: PCI device information struct
|
|
**/
|
|
static int i40e_resume(struct pci_dev *pdev)
|
|
{
|
|
struct i40e_pf *pf = pci_get_drvdata(pdev);
|
|
u32 err;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
/* pci_restore_state() clears dev->state_saves, so
|
|
* call pci_save_state() again to restore it.
|
|
*/
|
|
pci_save_state(pdev);
|
|
|
|
err = pci_enable_device_mem(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"%s: Cannot enable PCI device from suspend\n",
|
|
__func__);
|
|
return err;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
/* no wakeup events while running */
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
/* handling the reset will rebuild the device state */
|
|
if (test_and_clear_bit(__I40E_SUSPENDED, &pf->state)) {
|
|
clear_bit(__I40E_DOWN, &pf->state);
|
|
rtnl_lock();
|
|
i40e_reset_and_rebuild(pf, false);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
static const struct pci_error_handlers i40e_err_handler = {
|
|
.error_detected = i40e_pci_error_detected,
|
|
.slot_reset = i40e_pci_error_slot_reset,
|
|
.resume = i40e_pci_error_resume,
|
|
};
|
|
|
|
static struct pci_driver i40e_driver = {
|
|
.name = i40e_driver_name,
|
|
.id_table = i40e_pci_tbl,
|
|
.probe = i40e_probe,
|
|
.remove = i40e_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = i40e_suspend,
|
|
.resume = i40e_resume,
|
|
#endif
|
|
.shutdown = i40e_shutdown,
|
|
.err_handler = &i40e_err_handler,
|
|
.sriov_configure = i40e_pci_sriov_configure,
|
|
};
|
|
|
|
/**
|
|
* i40e_init_module - Driver registration routine
|
|
*
|
|
* i40e_init_module is the first routine called when the driver is
|
|
* loaded. All it does is register with the PCI subsystem.
|
|
**/
|
|
static int __init i40e_init_module(void)
|
|
{
|
|
pr_info("%s: %s - version %s\n", i40e_driver_name,
|
|
i40e_driver_string, i40e_driver_version_str);
|
|
pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
|
|
i40e_dbg_init();
|
|
return pci_register_driver(&i40e_driver);
|
|
}
|
|
module_init(i40e_init_module);
|
|
|
|
/**
|
|
* i40e_exit_module - Driver exit cleanup routine
|
|
*
|
|
* i40e_exit_module is called just before the driver is removed
|
|
* from memory.
|
|
**/
|
|
static void __exit i40e_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&i40e_driver);
|
|
i40e_dbg_exit();
|
|
}
|
|
module_exit(i40e_exit_module);
|