linux_dsm_epyc7002/arch/x86/kernel/vsmp_64.c
Paul Gortmaker 70c4f78b23 x86: replace __init_or_module with __init in non-modular vsmp_64.c
The __init_or_module is from commit 05e12e1c4c
("x86: fix 27-rc crash on vsmp due to paravirt during module load").

But as of commit 70511134f6
("Revert "x86: don't compile vsmp_64 for 32bit") this file became
obj-y and hence is now only for built-in.  That makes any
"_or_module" support no longer necessary.

We need to distinguish between the two in order to do some header
reorganization between init.h and module.h and we don't want to
be including module.h in non-modular code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:41 -04:00

246 lines
5.7 KiB
C

/*
* vSMPowered(tm) systems specific initialization
* Copyright (C) 2005 ScaleMP Inc.
*
* Use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
* Ravikiran Thirumalai <kiran@scalemp.com>,
* Shai Fultheim <shai@scalemp.com>
* Paravirt ops integration: Glauber de Oliveira Costa <gcosta@redhat.com>,
* Ravikiran Thirumalai <kiran@scalemp.com>
*/
#include <linux/init.h>
#include <linux/pci_ids.h>
#include <linux/pci_regs.h>
#include <linux/smp.h>
#include <linux/irq.h>
#include <asm/apic.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
#include <asm/paravirt.h>
#include <asm/setup.h>
#define TOPOLOGY_REGISTER_OFFSET 0x10
/* Flag below is initialized once during vSMP PCI initialization. */
static int irq_routing_comply = 1;
#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
/*
* Interrupt control on vSMPowered systems:
* ~AC is a shadow of IF. If IF is 'on' AC should be 'off'
* and vice versa.
*/
asmlinkage __visible unsigned long vsmp_save_fl(void)
{
unsigned long flags = native_save_fl();
if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC))
flags &= ~X86_EFLAGS_IF;
return flags;
}
PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl);
__visible void vsmp_restore_fl(unsigned long flags)
{
if (flags & X86_EFLAGS_IF)
flags &= ~X86_EFLAGS_AC;
else
flags |= X86_EFLAGS_AC;
native_restore_fl(flags);
}
PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl);
asmlinkage __visible void vsmp_irq_disable(void)
{
unsigned long flags = native_save_fl();
native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
}
PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable);
asmlinkage __visible void vsmp_irq_enable(void)
{
unsigned long flags = native_save_fl();
native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
}
PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable);
static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
unsigned long addr, unsigned len)
{
switch (type) {
case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
case PARAVIRT_PATCH(pv_irq_ops.save_fl):
case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
return paravirt_patch_default(type, clobbers, ibuf, addr, len);
default:
return native_patch(type, clobbers, ibuf, addr, len);
}
}
static void __init set_vsmp_pv_ops(void)
{
void __iomem *address;
unsigned int cap, ctl, cfg;
/* set vSMP magic bits to indicate vSMP capable kernel */
cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
address = early_ioremap(cfg, 8);
cap = readl(address);
ctl = readl(address + 4);
printk(KERN_INFO "vSMP CTL: capabilities:0x%08x control:0x%08x\n",
cap, ctl);
/* If possible, let the vSMP foundation route the interrupt optimally */
#ifdef CONFIG_SMP
if (cap & ctl & BIT(8)) {
ctl &= ~BIT(8);
/* Interrupt routing set to ignore */
irq_routing_comply = 0;
#ifdef CONFIG_PROC_FS
/* Don't let users change irq affinity via procfs */
no_irq_affinity = 1;
#endif
}
#endif
if (cap & ctl & (1 << 4)) {
/* Setup irq ops and turn on vSMP IRQ fastpath handling */
pv_irq_ops.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
pv_irq_ops.irq_enable = PV_CALLEE_SAVE(vsmp_irq_enable);
pv_irq_ops.save_fl = PV_CALLEE_SAVE(vsmp_save_fl);
pv_irq_ops.restore_fl = PV_CALLEE_SAVE(vsmp_restore_fl);
pv_init_ops.patch = vsmp_patch;
ctl &= ~(1 << 4);
}
writel(ctl, address + 4);
ctl = readl(address + 4);
pr_info("vSMP CTL: control set to:0x%08x\n", ctl);
early_iounmap(address, 8);
}
#else
static void __init set_vsmp_pv_ops(void)
{
}
#endif
#ifdef CONFIG_PCI
static int is_vsmp = -1;
static void __init detect_vsmp_box(void)
{
is_vsmp = 0;
if (!early_pci_allowed())
return;
/* Check if we are running on a ScaleMP vSMPowered box */
if (read_pci_config(0, 0x1f, 0, PCI_VENDOR_ID) ==
(PCI_VENDOR_ID_SCALEMP | (PCI_DEVICE_ID_SCALEMP_VSMP_CTL << 16)))
is_vsmp = 1;
}
static int is_vsmp_box(void)
{
if (is_vsmp != -1)
return is_vsmp;
else {
WARN_ON_ONCE(1);
return 0;
}
}
#else
static void __init detect_vsmp_box(void)
{
}
static int is_vsmp_box(void)
{
return 0;
}
#endif
static void __init vsmp_cap_cpus(void)
{
#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
void __iomem *address;
unsigned int cfg, topology, node_shift, maxcpus;
/*
* CONFIG_X86_VSMP is not configured, so limit the number CPUs to the
* ones present in the first board, unless explicitly overridden by
* setup_max_cpus
*/
if (setup_max_cpus != NR_CPUS)
return;
/* Read the vSMP Foundation topology register */
cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4);
if (WARN_ON(!address))
return;
topology = readl(address);
node_shift = (topology >> 16) & 0x7;
if (!node_shift)
/* The value 0 should be decoded as 8 */
node_shift = 8;
maxcpus = (topology & ((1 << node_shift) - 1)) + 1;
pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n",
maxcpus);
setup_max_cpus = maxcpus;
early_iounmap(address, 4);
#endif
}
static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
{
return hard_smp_processor_id() >> index_msb;
}
/*
* In vSMP, all cpus should be capable of handling interrupts, regardless of
* the APIC used.
*/
static void fill_vector_allocation_domain(int cpu, struct cpumask *retmask,
const struct cpumask *mask)
{
cpumask_setall(retmask);
}
static void vsmp_apic_post_init(void)
{
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
if (!irq_routing_comply)
apic->vector_allocation_domain = fill_vector_allocation_domain;
}
void __init vsmp_init(void)
{
detect_vsmp_box();
if (!is_vsmp_box())
return;
x86_platform.apic_post_init = vsmp_apic_post_init;
vsmp_cap_cpus();
set_vsmp_pv_ops();
return;
}