linux_dsm_epyc7002/drivers/gpu/drm/i915/display/intel_fbdev.c
Daniel Vetter 6c56e8adc0 drm-misc-next for v5.6:
UAPI Changes:
 - Add support for DMA-BUF HEAPS.
 
 Cross-subsystem Changes:
 - mipi dsi definition updates, pulled into drm-intel as well.
 - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
 - Remove support for dma-buf kmap/kunmap.
 - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
 
 Core Changes:
 - Small cleanups to ttm.
 - Fix SCDC definition.
 - Assorted cleanups to core.
 - Add todo to remove load/unload hooks, and use generic fbdev emulation.
 - Assorted documentation updates.
 - Use blocking ww lock in ttm fault handler.
 - Remove drm_fb_helper_fbdev_setup/teardown.
 - Warning fixes with W=1 for atomic.
 - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
 - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
 - Various kconfig indentation fixes in core and drivers.
 - Fix freeing transactions in dp-mst correctly.
 - Sean Paul is steping down as core maintainer. :-(
 - Add lockdep annotations for atomic locks vs dma-resv.
 - Prevent use-after-free for a bad job in drm_scheduler.
 - Fill out all block sizes in the P01x and P210 definitions.
 - Avoid division by zero in drm/rect, and fix bounds.
 - Add drm/rect selftests.
 - Add aspect ratio and alternate clocks for HDMI 4k modes.
 - Add todo for drm_framebuffer_funcs and fb_create cleanup.
 - Drop DRM_AUTH for prime import/export ioctls.
 - Clear DP-MST payload id tables downstream when initializating.
 - Fix for DSC throughput definition.
 - Add extra FEC definitions.
 - Fix fake offset in drm_gem_object_funs.mmap.
 - Stop using encoder->bridge in core directly
 - Handle bridge chaining slightly better.
 - Add backlight support to drm/panel, and use it in many panel drivers.
 - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
 
 Driver Changes:
 - Small fixes all over.
 - Fix documentation in vkms.
 - Fix mmap_sem vs dma_resv in nouveau.
 - Small cleanup in komeda.
 - Add page flip support in gma500 for psb/cdv.
 - Add ddc symlink in the connector sysfs directory for many drivers.
 - Add support for analogic an6345, and fix small bugs in it.
 - Add atomic modesetting support to ast.
 - Fix radeon fault handler VMA race.
 - Switch udl to use generic shmem helpers.
 - Unconditional vblank handling for mcde.
 - Miscellaneous fixes to mcde.
 - Tweak debug output from komeda using debugfs.
 - Add gamma and color transform support to komeda for DOU-IPS.
 - Add support for sony acx424AKP panel.
 - Various small cleanups to gma500.
 - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
 - Add support for Logic PD Type 28 panel.
 - Use drm_panel_* wrapper functions in exynos/tegra/msm.
 - Add devicetree bindings for generic DSI panels.
 - Don't include drm_pci.h directly in many drivers.
 - Add support for begin/end_cpu_access in udmabuf.
 - Stop using drm_get_pci_dev in gma500 and mga200.
 - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
 - Add devfreq thermal support to panfrost.
 - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
 - meson: Add support for OSD1 plane AFBC commit.
 - Stop displaying garbage when toggling ast primary plane on/off.
 - More cleanups and fixes to UDL.
 - Add D32 suport to komeda.
 - Remove globle copy of drm_dev in gma500.
 - Add support for Boe Himax8279d MIPI-DSI LCD panel.
 - Add support for ingenic JZ4770 panel.
 - Small null pointer deference fix in ingenic.
 - Remove support for the special tfp420 driver, as there is a generic way to do it.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl34lkkACgkQ/lWMcqZw
 E8M76g//WRYl9fWnV063s44FBVJYjGxaus0vQJSGidaPCIE6Ep6TNjXp8DVzV82M
 HR79P9glL02DC9B8pflioNNXdIRGSVk/FJcKVB2seFAqEFCAknvWDM/X/y+mOUpp
 fUeFl+Znlwx3YlM8f4Qujdbm+CbTewfbya4VAWeWd8XG2V8jfq5cmODPPlUMNenZ
 J6Ja+W3ph741uSIfAKaP69LVJgOcuUjXINE4SWhRk/i5QF3GIRej/A7ZjWGLQ/t2
 2zUUF7EiCzhPomM40H3ddKtXb4ZjNJuc5pOD4GpxR8ciNbe2gUOHEZ5aenwYBdsU
 5MwbxNKyMbKXATtn3yv3fSc4jH3DtmEKpmovONeO8ZDBrQBnxeYa3tQvfkNghA2f
 acoZMzYUImV+ft6DMIgpXppASvo7mQYDAbLPOGEJ9E44AL4UP00jesEjnK5FOHSR
 3BEzGUnK/6QL5zFNPni8YZQ8dan4jDIno1mqIV+cQ4WCGlaKckzIWO6243Bf13b/
 kROSJpgWkiK6Ngq0ofhD0MHyT/m1QnqUzWRKTJhRtPflSWRBsDZqWCQ5Vx1QlNIE
 /HfTNbTpXWwa+5wXbbB8TkDw5t9cQGnR+QcrEd9HgoIec7B5Re8rx9i0TJAT4N05
 03RCQCecSfD8gwKd2wgaFIpFGRl9lTdLYSpffSmyL2X5a20lZhM=
 =b15X
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-17 13:57:54 +01:00

629 lines
17 KiB
C

/*
* Copyright © 2007 David Airlie
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* David Airlie
*/
#include <linux/async.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
#include <linux/vga_switcheroo.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "intel_display_types.h"
#include "intel_fbdev.h"
#include "intel_frontbuffer.h"
static struct intel_frontbuffer *to_frontbuffer(struct intel_fbdev *ifbdev)
{
return ifbdev->fb->frontbuffer;
}
static void intel_fbdev_invalidate(struct intel_fbdev *ifbdev)
{
intel_frontbuffer_invalidate(to_frontbuffer(ifbdev), ORIGIN_CPU);
}
static int intel_fbdev_set_par(struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct intel_fbdev *ifbdev =
container_of(fb_helper, struct intel_fbdev, helper);
int ret;
ret = drm_fb_helper_set_par(info);
if (ret == 0)
intel_fbdev_invalidate(ifbdev);
return ret;
}
static int intel_fbdev_blank(int blank, struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct intel_fbdev *ifbdev =
container_of(fb_helper, struct intel_fbdev, helper);
int ret;
ret = drm_fb_helper_blank(blank, info);
if (ret == 0)
intel_fbdev_invalidate(ifbdev);
return ret;
}
static int intel_fbdev_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct intel_fbdev *ifbdev =
container_of(fb_helper, struct intel_fbdev, helper);
int ret;
ret = drm_fb_helper_pan_display(var, info);
if (ret == 0)
intel_fbdev_invalidate(ifbdev);
return ret;
}
static const struct fb_ops intelfb_ops = {
.owner = THIS_MODULE,
DRM_FB_HELPER_DEFAULT_OPS,
.fb_set_par = intel_fbdev_set_par,
.fb_fillrect = drm_fb_helper_cfb_fillrect,
.fb_copyarea = drm_fb_helper_cfb_copyarea,
.fb_imageblit = drm_fb_helper_cfb_imageblit,
.fb_pan_display = intel_fbdev_pan_display,
.fb_blank = intel_fbdev_blank,
};
static int intelfb_alloc(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
struct intel_fbdev *ifbdev =
container_of(helper, struct intel_fbdev, helper);
struct drm_framebuffer *fb;
struct drm_device *dev = helper->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_mode_fb_cmd2 mode_cmd = {};
struct drm_i915_gem_object *obj;
int size;
/* we don't do packed 24bpp */
if (sizes->surface_bpp == 24)
sizes->surface_bpp = 32;
mode_cmd.width = sizes->surface_width;
mode_cmd.height = sizes->surface_height;
mode_cmd.pitches[0] = ALIGN(mode_cmd.width *
DIV_ROUND_UP(sizes->surface_bpp, 8), 64);
mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
sizes->surface_depth);
size = mode_cmd.pitches[0] * mode_cmd.height;
size = PAGE_ALIGN(size);
/* If the FB is too big, just don't use it since fbdev is not very
* important and we should probably use that space with FBC or other
* features. */
obj = ERR_PTR(-ENODEV);
if (size * 2 < dev_priv->stolen_usable_size)
obj = i915_gem_object_create_stolen(dev_priv, size);
if (IS_ERR(obj))
obj = i915_gem_object_create_shmem(dev_priv, size);
if (IS_ERR(obj)) {
DRM_ERROR("failed to allocate framebuffer\n");
return PTR_ERR(obj);
}
fb = intel_framebuffer_create(obj, &mode_cmd);
i915_gem_object_put(obj);
if (IS_ERR(fb))
return PTR_ERR(fb);
ifbdev->fb = to_intel_framebuffer(fb);
return 0;
}
static int intelfb_create(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
struct intel_fbdev *ifbdev =
container_of(helper, struct intel_fbdev, helper);
struct intel_framebuffer *intel_fb = ifbdev->fb;
struct drm_device *dev = helper->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct pci_dev *pdev = dev_priv->drm.pdev;
struct i915_ggtt *ggtt = &dev_priv->ggtt;
const struct i915_ggtt_view view = {
.type = I915_GGTT_VIEW_NORMAL,
};
intel_wakeref_t wakeref;
struct fb_info *info;
struct i915_vma *vma;
unsigned long flags = 0;
bool prealloc = false;
void __iomem *vaddr;
int ret;
if (intel_fb &&
(sizes->fb_width > intel_fb->base.width ||
sizes->fb_height > intel_fb->base.height)) {
DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
" releasing it\n",
intel_fb->base.width, intel_fb->base.height,
sizes->fb_width, sizes->fb_height);
drm_framebuffer_put(&intel_fb->base);
intel_fb = ifbdev->fb = NULL;
}
if (!intel_fb || WARN_ON(!intel_fb_obj(&intel_fb->base))) {
DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
ret = intelfb_alloc(helper, sizes);
if (ret)
return ret;
intel_fb = ifbdev->fb;
} else {
DRM_DEBUG_KMS("re-using BIOS fb\n");
prealloc = true;
sizes->fb_width = intel_fb->base.width;
sizes->fb_height = intel_fb->base.height;
}
wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
/* Pin the GGTT vma for our access via info->screen_base.
* This also validates that any existing fb inherited from the
* BIOS is suitable for own access.
*/
vma = intel_pin_and_fence_fb_obj(&ifbdev->fb->base,
&view, false, &flags);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out_unlock;
}
intel_frontbuffer_flush(to_frontbuffer(ifbdev), ORIGIN_DIRTYFB);
info = drm_fb_helper_alloc_fbi(helper);
if (IS_ERR(info)) {
DRM_ERROR("Failed to allocate fb_info\n");
ret = PTR_ERR(info);
goto out_unpin;
}
ifbdev->helper.fb = &ifbdev->fb->base;
info->fbops = &intelfb_ops;
/* setup aperture base/size for vesafb takeover */
info->apertures->ranges[0].base = ggtt->gmadr.start;
info->apertures->ranges[0].size = ggtt->mappable_end;
/* Our framebuffer is the entirety of fbdev's system memory */
info->fix.smem_start =
(unsigned long)(ggtt->gmadr.start + vma->node.start);
info->fix.smem_len = vma->node.size;
vaddr = i915_vma_pin_iomap(vma);
if (IS_ERR(vaddr)) {
DRM_ERROR("Failed to remap framebuffer into virtual memory\n");
ret = PTR_ERR(vaddr);
goto out_unpin;
}
info->screen_base = vaddr;
info->screen_size = vma->node.size;
drm_fb_helper_fill_info(info, &ifbdev->helper, sizes);
/* If the object is shmemfs backed, it will have given us zeroed pages.
* If the object is stolen however, it will be full of whatever
* garbage was left in there.
*/
if (vma->obj->stolen && !prealloc)
memset_io(info->screen_base, 0, info->screen_size);
/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x\n",
ifbdev->fb->base.width, ifbdev->fb->base.height,
i915_ggtt_offset(vma));
ifbdev->vma = vma;
ifbdev->vma_flags = flags;
intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
vga_switcheroo_client_fb_set(pdev, info);
return 0;
out_unpin:
intel_unpin_fb_vma(vma, flags);
out_unlock:
intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
return ret;
}
static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
.fb_probe = intelfb_create,
};
static void intel_fbdev_destroy(struct intel_fbdev *ifbdev)
{
/* We rely on the object-free to release the VMA pinning for
* the info->screen_base mmaping. Leaking the VMA is simpler than
* trying to rectify all the possible error paths leading here.
*/
drm_fb_helper_fini(&ifbdev->helper);
if (ifbdev->vma)
intel_unpin_fb_vma(ifbdev->vma, ifbdev->vma_flags);
if (ifbdev->fb)
drm_framebuffer_remove(&ifbdev->fb->base);
kfree(ifbdev);
}
/*
* Build an intel_fbdev struct using a BIOS allocated framebuffer, if possible.
* The core display code will have read out the current plane configuration,
* so we use that to figure out if there's an object for us to use as the
* fb, and if so, we re-use it for the fbdev configuration.
*
* Note we only support a single fb shared across pipes for boot (mostly for
* fbcon), so we just find the biggest and use that.
*/
static bool intel_fbdev_init_bios(struct drm_device *dev,
struct intel_fbdev *ifbdev)
{
struct intel_framebuffer *fb = NULL;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
unsigned int max_size = 0;
/* Find the largest fb */
for_each_crtc(dev, crtc) {
struct drm_i915_gem_object *obj =
intel_fb_obj(crtc->primary->state->fb);
intel_crtc = to_intel_crtc(crtc);
if (!crtc->state->active || !obj) {
DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
pipe_name(intel_crtc->pipe));
continue;
}
if (obj->base.size > max_size) {
DRM_DEBUG_KMS("found possible fb from plane %c\n",
pipe_name(intel_crtc->pipe));
fb = to_intel_framebuffer(crtc->primary->state->fb);
max_size = obj->base.size;
}
}
if (!fb) {
DRM_DEBUG_KMS("no active fbs found, not using BIOS config\n");
goto out;
}
/* Now make sure all the pipes will fit into it */
for_each_crtc(dev, crtc) {
unsigned int cur_size;
intel_crtc = to_intel_crtc(crtc);
if (!crtc->state->active) {
DRM_DEBUG_KMS("pipe %c not active, skipping\n",
pipe_name(intel_crtc->pipe));
continue;
}
DRM_DEBUG_KMS("checking plane %c for BIOS fb\n",
pipe_name(intel_crtc->pipe));
/*
* See if the plane fb we found above will fit on this
* pipe. Note we need to use the selected fb's pitch and bpp
* rather than the current pipe's, since they differ.
*/
cur_size = crtc->state->adjusted_mode.crtc_hdisplay;
cur_size = cur_size * fb->base.format->cpp[0];
if (fb->base.pitches[0] < cur_size) {
DRM_DEBUG_KMS("fb not wide enough for plane %c (%d vs %d)\n",
pipe_name(intel_crtc->pipe),
cur_size, fb->base.pitches[0]);
fb = NULL;
break;
}
cur_size = crtc->state->adjusted_mode.crtc_vdisplay;
cur_size = intel_fb_align_height(&fb->base, 0, cur_size);
cur_size *= fb->base.pitches[0];
DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
pipe_name(intel_crtc->pipe),
crtc->state->adjusted_mode.crtc_hdisplay,
crtc->state->adjusted_mode.crtc_vdisplay,
fb->base.format->cpp[0] * 8,
cur_size);
if (cur_size > max_size) {
DRM_DEBUG_KMS("fb not big enough for plane %c (%d vs %d)\n",
pipe_name(intel_crtc->pipe),
cur_size, max_size);
fb = NULL;
break;
}
DRM_DEBUG_KMS("fb big enough for plane %c (%d >= %d)\n",
pipe_name(intel_crtc->pipe),
max_size, cur_size);
}
if (!fb) {
DRM_DEBUG_KMS("BIOS fb not suitable for all pipes, not using\n");
goto out;
}
ifbdev->preferred_bpp = fb->base.format->cpp[0] * 8;
ifbdev->fb = fb;
drm_framebuffer_get(&ifbdev->fb->base);
/* Final pass to check if any active pipes don't have fbs */
for_each_crtc(dev, crtc) {
intel_crtc = to_intel_crtc(crtc);
if (!crtc->state->active)
continue;
WARN(!crtc->primary->state->fb,
"re-used BIOS config but lost an fb on crtc %d\n",
crtc->base.id);
}
DRM_DEBUG_KMS("using BIOS fb for initial console\n");
return true;
out:
return false;
}
static void intel_fbdev_suspend_worker(struct work_struct *work)
{
intel_fbdev_set_suspend(&container_of(work,
struct drm_i915_private,
fbdev_suspend_work)->drm,
FBINFO_STATE_RUNNING,
true);
}
int intel_fbdev_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_fbdev *ifbdev;
int ret;
if (WARN_ON(!HAS_DISPLAY(dev_priv) || !INTEL_DISPLAY_ENABLED(dev_priv)))
return -ENODEV;
ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
if (ifbdev == NULL)
return -ENOMEM;
mutex_init(&ifbdev->hpd_lock);
drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
if (!intel_fbdev_init_bios(dev, ifbdev))
ifbdev->preferred_bpp = 32;
ret = drm_fb_helper_init(dev, &ifbdev->helper, 4);
if (ret) {
kfree(ifbdev);
return ret;
}
dev_priv->fbdev = ifbdev;
INIT_WORK(&dev_priv->fbdev_suspend_work, intel_fbdev_suspend_worker);
drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
return 0;
}
static void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
{
struct intel_fbdev *ifbdev = data;
/* Due to peculiar init order wrt to hpd handling this is separate. */
if (drm_fb_helper_initial_config(&ifbdev->helper,
ifbdev->preferred_bpp))
intel_fbdev_unregister(to_i915(ifbdev->helper.dev));
}
void intel_fbdev_initial_config_async(struct drm_device *dev)
{
struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
if (!ifbdev)
return;
ifbdev->cookie = async_schedule(intel_fbdev_initial_config, ifbdev);
}
static void intel_fbdev_sync(struct intel_fbdev *ifbdev)
{
if (!ifbdev->cookie)
return;
/* Only serialises with all preceding async calls, hence +1 */
async_synchronize_cookie(ifbdev->cookie + 1);
ifbdev->cookie = 0;
}
void intel_fbdev_unregister(struct drm_i915_private *dev_priv)
{
struct intel_fbdev *ifbdev = dev_priv->fbdev;
if (!ifbdev)
return;
cancel_work_sync(&dev_priv->fbdev_suspend_work);
if (!current_is_async())
intel_fbdev_sync(ifbdev);
drm_fb_helper_unregister_fbi(&ifbdev->helper);
}
void intel_fbdev_fini(struct drm_i915_private *dev_priv)
{
struct intel_fbdev *ifbdev = fetch_and_zero(&dev_priv->fbdev);
if (!ifbdev)
return;
intel_fbdev_destroy(ifbdev);
}
/* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD
* processing, fbdev will perform a full connector reprobe if a hotplug event
* was received while HPD was suspended.
*/
static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
{
bool send_hpd = false;
mutex_lock(&ifbdev->hpd_lock);
ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED;
send_hpd = !ifbdev->hpd_suspended && ifbdev->hpd_waiting;
ifbdev->hpd_waiting = false;
mutex_unlock(&ifbdev->hpd_lock);
if (send_hpd) {
DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
drm_fb_helper_hotplug_event(&ifbdev->helper);
}
}
void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_fbdev *ifbdev = dev_priv->fbdev;
struct fb_info *info;
if (!ifbdev || !ifbdev->vma)
return;
info = ifbdev->helper.fbdev;
if (synchronous) {
/* Flush any pending work to turn the console on, and then
* wait to turn it off. It must be synchronous as we are
* about to suspend or unload the driver.
*
* Note that from within the work-handler, we cannot flush
* ourselves, so only flush outstanding work upon suspend!
*/
if (state != FBINFO_STATE_RUNNING)
flush_work(&dev_priv->fbdev_suspend_work);
console_lock();
} else {
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
WARN_ON(state != FBINFO_STATE_RUNNING);
if (!console_trylock()) {
/* Don't block our own workqueue as this can
* be run in parallel with other i915.ko tasks.
*/
schedule_work(&dev_priv->fbdev_suspend_work);
return;
}
}
/* On resume from hibernation: If the object is shmemfs backed, it has
* been restored from swap. If the object is stolen however, it will be
* full of whatever garbage was left in there.
*/
if (state == FBINFO_STATE_RUNNING &&
intel_fb_obj(&ifbdev->fb->base)->stolen)
memset_io(info->screen_base, 0, info->screen_size);
drm_fb_helper_set_suspend(&ifbdev->helper, state);
console_unlock();
intel_fbdev_hpd_set_suspend(ifbdev, state);
}
void intel_fbdev_output_poll_changed(struct drm_device *dev)
{
struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
bool send_hpd;
if (!ifbdev)
return;
intel_fbdev_sync(ifbdev);
mutex_lock(&ifbdev->hpd_lock);
send_hpd = !ifbdev->hpd_suspended;
ifbdev->hpd_waiting = true;
mutex_unlock(&ifbdev->hpd_lock);
if (send_hpd && (ifbdev->vma || ifbdev->helper.deferred_setup))
drm_fb_helper_hotplug_event(&ifbdev->helper);
}
void intel_fbdev_restore_mode(struct drm_device *dev)
{
struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
if (!ifbdev)
return;
intel_fbdev_sync(ifbdev);
if (!ifbdev->vma)
return;
if (drm_fb_helper_restore_fbdev_mode_unlocked(&ifbdev->helper) == 0)
intel_fbdev_invalidate(ifbdev);
}