mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:26:42 +07:00
8a56e1ee92
There are many cases that Semiconductor is misspelled. The patch fix these typos. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
199 lines
4.9 KiB
C
199 lines
4.9 KiB
C
/*
|
|
* Freescale Lite5200 board support
|
|
*
|
|
* Written by: Grant Likely <grant.likely@secretlab.ca>
|
|
*
|
|
* Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
|
|
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
|
|
*
|
|
* Description:
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/initrd.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/mpc52xx.h>
|
|
|
|
/* ************************************************************************
|
|
*
|
|
* Setup the architecture
|
|
*
|
|
*/
|
|
|
|
/* mpc5200 device tree match tables */
|
|
static struct of_device_id mpc5200_cdm_ids[] __initdata = {
|
|
{ .compatible = "fsl,mpc5200-cdm", },
|
|
{ .compatible = "mpc5200-cdm", },
|
|
{}
|
|
};
|
|
|
|
static struct of_device_id mpc5200_gpio_ids[] __initdata = {
|
|
{ .compatible = "fsl,mpc5200-gpio", },
|
|
{ .compatible = "mpc5200-gpio", },
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* Fix clock configuration.
|
|
*
|
|
* Firmware is supposed to be responsible for this. If you are creating a
|
|
* new board port, do *NOT* duplicate this code. Fix your boot firmware
|
|
* to set it correctly in the first place
|
|
*/
|
|
static void __init
|
|
lite5200_fix_clock_config(void)
|
|
{
|
|
struct device_node *np;
|
|
struct mpc52xx_cdm __iomem *cdm;
|
|
/* Map zones */
|
|
np = of_find_matching_node(NULL, mpc5200_cdm_ids);
|
|
cdm = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
if (!cdm) {
|
|
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
/* Use internal 48 Mhz */
|
|
out_8(&cdm->ext_48mhz_en, 0x00);
|
|
out_8(&cdm->fd_enable, 0x01);
|
|
if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
|
|
out_be16(&cdm->fd_counters, 0x0001);
|
|
else
|
|
out_be16(&cdm->fd_counters, 0x5555);
|
|
|
|
/* Unmap the regs */
|
|
iounmap(cdm);
|
|
}
|
|
|
|
/*
|
|
* Fix setting of port_config register.
|
|
*
|
|
* Firmware is supposed to be responsible for this. If you are creating a
|
|
* new board port, do *NOT* duplicate this code. Fix your boot firmware
|
|
* to set it correctly in the first place
|
|
*/
|
|
static void __init
|
|
lite5200_fix_port_config(void)
|
|
{
|
|
struct device_node *np;
|
|
struct mpc52xx_gpio __iomem *gpio;
|
|
u32 port_config;
|
|
|
|
np = of_find_matching_node(NULL, mpc5200_gpio_ids);
|
|
gpio = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
if (!gpio) {
|
|
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
/* Set port config */
|
|
port_config = in_be32(&gpio->port_config);
|
|
|
|
port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
|
|
|
|
port_config &= ~0x00007000; /* USB port : Differential mode */
|
|
port_config |= 0x00001000; /* USB 1 only */
|
|
|
|
port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
|
|
port_config |= 0x01000000;
|
|
|
|
pr_debug("port_config: old:%x new:%x\n",
|
|
in_be32(&gpio->port_config), port_config);
|
|
out_be32(&gpio->port_config, port_config);
|
|
|
|
/* Unmap zone */
|
|
iounmap(gpio);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void lite5200_suspend_prepare(void __iomem *mbar)
|
|
{
|
|
u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
|
|
u8 level = 0; /* wakeup on low level */
|
|
mpc52xx_set_wakeup_gpio(pin, level);
|
|
|
|
/*
|
|
* power down usb port
|
|
* this needs to be called before of-ohci suspend code
|
|
*/
|
|
|
|
/* set ports to "power switched" and "powered at the same time"
|
|
* USB Rh descriptor A: NPS = 0, PSM = 0 */
|
|
out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300);
|
|
/* USB Rh status: LPS = 1 - turn off power */
|
|
out_be32(mbar + 0x1050, 0x00000001);
|
|
}
|
|
|
|
static void lite5200_resume_finish(void __iomem *mbar)
|
|
{
|
|
/* USB Rh status: LPSC = 1 - turn on power */
|
|
out_be32(mbar + 0x1050, 0x00010000);
|
|
}
|
|
#endif
|
|
|
|
static void __init lite5200_setup_arch(void)
|
|
{
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("lite5200_setup_arch()", 0);
|
|
|
|
/* Map important registers from the internal memory map */
|
|
mpc52xx_map_common_devices();
|
|
|
|
/* Some mpc5200 & mpc5200b related configuration */
|
|
mpc5200_setup_xlb_arbiter();
|
|
|
|
/* Fix things that firmware should have done. */
|
|
lite5200_fix_clock_config();
|
|
lite5200_fix_port_config();
|
|
|
|
#ifdef CONFIG_PM
|
|
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
|
|
mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
|
|
lite5200_pm_init();
|
|
#endif
|
|
|
|
mpc52xx_setup_pci();
|
|
}
|
|
|
|
static const char * const board[] __initconst = {
|
|
"fsl,lite5200",
|
|
"fsl,lite5200b",
|
|
NULL,
|
|
};
|
|
|
|
/*
|
|
* Called very early, MMU is off, device-tree isn't unflattened
|
|
*/
|
|
static int __init lite5200_probe(void)
|
|
{
|
|
return of_flat_dt_match(of_get_flat_dt_root(), board);
|
|
}
|
|
|
|
define_machine(lite5200) {
|
|
.name = "lite5200",
|
|
.probe = lite5200_probe,
|
|
.setup_arch = lite5200_setup_arch,
|
|
.init = mpc52xx_declare_of_platform_devices,
|
|
.init_IRQ = mpc52xx_init_irq,
|
|
.get_irq = mpc52xx_get_irq,
|
|
.restart = mpc52xx_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
};
|