linux_dsm_epyc7002/drivers/misc/mic/card/mic_x100.c
Arnd Bergmann bc83f79bd2 mic: avoid statically declaring a 'struct device'.
Generally, declaring a platform device as a static variable is
a bad idea and can cause all kinds of problems, in particular
with the DMA configuration and lifetime rules.

A specific problem we hit here is from a bug in clang that warns
about certain (otherwise valid) macros when used in static variables:

drivers/misc/mic/card/mic_x100.c:285:27: warning: shift count >= width of type [-Wshift-count-overflow]
static u64 mic_dma_mask = DMA_BIT_MASK(64);
                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                     ^ ~~~

A slightly better way here is to create the platform device dynamically
and set the dma mask in the probe function.
This avoids the warning and some other problems, but is still not ideal
because the device creation should really be separated from the driver,
and the fact that the device has no parent means we have to force
the dma mask rather than having it set up from the bus that the device
is actually on.

Fixes: dd8d8d44df ("misc: mic: MIC card driver specific changes to enable SCIF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190712092426.872625-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 14:35:22 +02:00

348 lines
8.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Intel MIC Platform Software Stack (MPSS)
*
* Copyright(c) 2013 Intel Corporation.
*
* Disclaimer: The codes contained in these modules may be specific to
* the Intel Software Development Platform codenamed: Knights Ferry, and
* the Intel product codenamed: Knights Corner, and are not backward
* compatible with other Intel products. Additionally, Intel will NOT
* support the codes or instruction set in future products.
*
* Intel MIC Card driver.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include "../common/mic_dev.h"
#include "mic_device.h"
#include "mic_x100.h"
static const char mic_driver_name[] = "mic";
static struct mic_driver g_drv;
/**
* mic_read_spad - read from the scratchpad register
* @mdev: pointer to mic_device instance
* @idx: index to scratchpad register, 0 based
*
* This function allows reading of the 32bit scratchpad register.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
u32 mic_read_spad(struct mic_device *mdev, unsigned int idx)
{
return mic_mmio_read(&mdev->mmio,
MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_SPAD0 + idx * 4);
}
/**
* __mic_send_intr - Send interrupt to Host.
* @mdev: pointer to mic_device instance
* @doorbell: Doorbell number.
*/
void mic_send_intr(struct mic_device *mdev, int doorbell)
{
struct mic_mw *mw = &mdev->mmio;
if (doorbell > MIC_X100_MAX_DOORBELL_IDX)
return;
/* Ensure that the interrupt is ordered w.r.t previous stores. */
wmb();
mic_mmio_write(mw, MIC_X100_SBOX_SDBIC0_DBREQ_BIT,
MIC_X100_SBOX_BASE_ADDRESS +
(MIC_X100_SBOX_SDBIC0 + (4 * doorbell)));
}
/*
* mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
*/
static void mic_x100_send_sbox_intr(struct mic_mw *mw, int doorbell)
{
u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
apic_icr_offset);
/* for MIC we need to make sure we "hit" the send_icr bit (13) */
apicicr_low = (apicicr_low | (1 << 13));
/*
* Ensure that the interrupt is ordered w.r.t. previous stores
* to main memory. Fence instructions are not implemented in X100
* since execution is in order but a compiler barrier is still
* required.
*/
wmb();
mic_mmio_write(mw, apicicr_low,
MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
}
static void mic_x100_send_rdmasr_intr(struct mic_mw *mw, int doorbell)
{
int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
/*
* Ensure that the interrupt is ordered w.r.t. previous stores
* to main memory. Fence instructions are not implemented in X100
* since execution is in order but a compiler barrier is still
* required.
*/
wmb();
mic_mmio_write(mw, 0, MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
}
/**
* mic_ack_interrupt - Device specific interrupt handling.
* @mdev: pointer to mic_device instance
*
* Returns: bitmask of doorbell events triggered.
*/
u32 mic_ack_interrupt(struct mic_device *mdev)
{
return 0;
}
static inline int mic_get_sbox_irq(int db)
{
return MIC_X100_IRQ_BASE + db;
}
static inline int mic_get_rdmasr_irq(int index)
{
return MIC_X100_RDMASR_IRQ_BASE + index;
}
void mic_send_p2p_intr(int db, struct mic_mw *mw)
{
int rdmasr_index;
if (db < MIC_X100_NUM_SBOX_IRQ) {
mic_x100_send_sbox_intr(mw, db);
} else {
rdmasr_index = db - MIC_X100_NUM_SBOX_IRQ;
mic_x100_send_rdmasr_intr(mw, rdmasr_index);
}
}
/**
* mic_hw_intr_init - Initialize h/w specific interrupt
* information.
* @mdrv: pointer to mic_driver
*/
void mic_hw_intr_init(struct mic_driver *mdrv)
{
mdrv->intr_info.num_intr = MIC_X100_NUM_SBOX_IRQ +
MIC_X100_NUM_RDMASR_IRQ;
}
/**
* mic_db_to_irq - Retrieve irq number corresponding to a doorbell.
* @mdrv: pointer to mic_driver
* @db: The doorbell obtained for which the irq is needed. Doorbell
* may correspond to an sbox doorbell or an rdmasr index.
*
* Returns the irq corresponding to the doorbell.
*/
int mic_db_to_irq(struct mic_driver *mdrv, int db)
{
int rdmasr_index;
/*
* The total number of doorbell interrupts on the card are 16. Indices
* 0-8 falls in the SBOX category and 8-15 fall in the RDMASR category.
*/
if (db < MIC_X100_NUM_SBOX_IRQ) {
return mic_get_sbox_irq(db);
} else {
rdmasr_index = db - MIC_X100_NUM_SBOX_IRQ;
return mic_get_rdmasr_irq(rdmasr_index);
}
}
/*
* mic_card_map - Allocate virtual address for a remote memory region.
* @mdev: pointer to mic_device instance.
* @addr: Remote DMA address.
* @size: Size of the region.
*
* Returns: Virtual address backing the remote memory region.
*/
void __iomem *
mic_card_map(struct mic_device *mdev, dma_addr_t addr, size_t size)
{
return ioremap(addr, size);
}
/*
* mic_card_unmap - Unmap the virtual address for a remote memory region.
* @mdev: pointer to mic_device instance.
* @addr: Virtual address for remote memory region.
*
* Returns: None.
*/
void mic_card_unmap(struct mic_device *mdev, void __iomem *addr)
{
iounmap(addr);
}
static inline struct mic_driver *mbdev_to_mdrv(struct mbus_device *mbdev)
{
return dev_get_drvdata(mbdev->dev.parent);
}
static struct mic_irq *
_mic_request_threaded_irq(struct mbus_device *mbdev,
irq_handler_t handler, irq_handler_t thread_fn,
const char *name, void *data, int intr_src)
{
int rc = 0;
unsigned int irq = intr_src;
unsigned long cookie = irq;
rc = request_threaded_irq(irq, handler, thread_fn, 0, name, data);
if (rc) {
dev_err(mbdev_to_mdrv(mbdev)->dev,
"request_threaded_irq failed rc = %d\n", rc);
return ERR_PTR(rc);
}
return (struct mic_irq *)cookie;
}
static void _mic_free_irq(struct mbus_device *mbdev,
struct mic_irq *cookie, void *data)
{
unsigned long irq = (unsigned long)cookie;
free_irq(irq, data);
}
static void _mic_ack_interrupt(struct mbus_device *mbdev, int num)
{
mic_ack_interrupt(&mbdev_to_mdrv(mbdev)->mdev);
}
static struct mbus_hw_ops mbus_hw_ops = {
.request_threaded_irq = _mic_request_threaded_irq,
.free_irq = _mic_free_irq,
.ack_interrupt = _mic_ack_interrupt,
};
static int __init mic_probe(struct platform_device *pdev)
{
struct mic_driver *mdrv = &g_drv;
struct mic_device *mdev = &mdrv->mdev;
int rc = 0;
mdrv->dev = &pdev->dev;
snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name);
/* FIXME: use dma_set_mask_and_coherent() and check result */
dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
mdev->mmio.pa = MIC_X100_MMIO_BASE;
mdev->mmio.len = MIC_X100_MMIO_LEN;
mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
MIC_X100_MMIO_LEN);
if (!mdev->mmio.va) {
dev_err(&pdev->dev, "Cannot remap MMIO BAR\n");
rc = -EIO;
goto done;
}
mic_hw_intr_init(mdrv);
platform_set_drvdata(pdev, mdrv);
mdrv->dma_mbdev = mbus_register_device(mdrv->dev, MBUS_DEV_DMA_MIC,
NULL, &mbus_hw_ops, 0,
mdrv->mdev.mmio.va);
if (IS_ERR(mdrv->dma_mbdev)) {
rc = PTR_ERR(mdrv->dma_mbdev);
dev_err(&pdev->dev, "mbus_add_device failed rc %d\n", rc);
goto done;
}
rc = mic_driver_init(mdrv);
if (rc) {
dev_err(&pdev->dev, "mic_driver_init failed rc %d\n", rc);
goto remove_dma;
}
done:
return rc;
remove_dma:
mbus_unregister_device(mdrv->dma_mbdev);
return rc;
}
static int mic_remove(struct platform_device *pdev)
{
struct mic_driver *mdrv = &g_drv;
mic_driver_uninit(mdrv);
mbus_unregister_device(mdrv->dma_mbdev);
return 0;
}
static void mic_platform_shutdown(struct platform_device *pdev)
{
mic_remove(pdev);
}
static struct platform_driver __refdata mic_platform_driver = {
.probe = mic_probe,
.remove = mic_remove,
.shutdown = mic_platform_shutdown,
.driver = {
.name = mic_driver_name,
},
};
static struct platform_device *mic_platform_dev;
static int __init mic_init(void)
{
int ret;
struct cpuinfo_x86 *c = &cpu_data(0);
if (!(c->x86 == 11 && c->x86_model == 1)) {
ret = -ENODEV;
pr_err("%s not running on X100 ret %d\n", __func__, ret);
goto done;
}
request_module("mic_x100_dma");
mic_init_card_debugfs();
mic_platform_dev = platform_device_register_simple(mic_driver_name,
0, NULL, 0);
ret = PTR_ERR_OR_ZERO(mic_platform_dev);
if (ret) {
pr_err("platform_device_register_full ret %d\n", ret);
goto cleanup_debugfs;
}
ret = platform_driver_register(&mic_platform_driver);
if (ret) {
pr_err("platform_driver_register ret %d\n", ret);
goto device_unregister;
}
return ret;
device_unregister:
platform_device_unregister(mic_platform_dev);
cleanup_debugfs:
mic_exit_card_debugfs();
done:
return ret;
}
static void __exit mic_exit(void)
{
platform_driver_unregister(&mic_platform_driver);
platform_device_unregister(mic_platform_dev);
mic_exit_card_debugfs();
}
module_init(mic_init);
module_exit(mic_exit);
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("Intel(R) MIC X100 Card driver");
MODULE_LICENSE("GPL v2");