Christian Melki f9a9111b54 8250.c: less than 2400 baud fix. ... We noticed that we were loosing data at speed less than 2400 baud. It turned out our (TI16750 compatible) uart with 64 byte outgoing fifo was truncated to 16 byte (bit 5 sets fifo len) when modifying the fcr reg. The input code still fills the buffer with 64 bytes if I remember correctly and thus data is lost. Our fix was to remove whiping of the fcr content and just add the TRIGGER_1 which we want for latency. I can't see why this would not work on less than 2400 always, for all uarts ... Otherwise one would have to make sure the filling of the fifo re-checks the current state of available fifo size (urrk). Signed-off-by: Christian Melki <christian.melki@ericsson.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-05-01 13:40:29 -04:00
..
8250	8250.c: less than 2400 baud fix.	2012-05-01 13:40:29 -04:00
cpm_uart
jsm	jsm: Fixed EEH recovery error	2012-01-24 12:55:36 -08:00
21285.c	Disintegrate asm/system.h for ARM	2012-03-28 18:30:01 +01:00
68328serial.c	TTY: 68328serial, use tty_port_block_til_ready	2012-04-09 12:02:45 -07:00
altera_jtaguart.c
altera_uart.c	tty: serial: altera_uart: Check for NULL platform_data in probe.	2012-04-09 10:30:39 -07:00
amba-pl010.c
amba-pl011.c	Merge 3.4-rc3 into tty-next	2012-04-18 15:57:31 -07:00
apbuart.c
apbuart.h
ar933x_uart.c
atmel_serial.c	tty/serial: atmel_serial: fix RS485 half-duplex problem	2012-04-09 10:30:39 -07:00
bcm63xx_uart.c
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.	2012-03-13 14:33:39 -07:00
clps711x.c	ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR	2012-04-18 15:19:50 -07:00
crisv10.c	TTY: crisv10, initialize tty_port	2012-04-09 11:14:49 -07:00
crisv10.h
dz.c	Remove all #inclusions of asm/system.h	2012-03-28 18:30:03 +01:00
dz.h
efm32-uart.c	serial/efm32: add new driver	2012-01-26 11:29:47 -08:00
icom.c	Remove all #inclusions of asm/system.h	2012-03-28 18:30:03 +01:00
icom.h
ifx6x60.c	TTY: remove re-assignments to tty_driver members	2012-03-08 11:37:58 -08:00
ifx6x60.h
imx.c	serial: imx: add clk_prepare/clk_unprepare	2012-02-01 14:29:31 +01:00
ioc3_serial.c
ioc4_serial.c	TTY: remove serialP.h inclusion from some files	2012-03-08 11:47:02 -08:00
ip22zilog.c
ip22zilog.h
Kconfig	tty/serial/omap: console can only be built-in	2012-04-09 10:34:16 -07:00
kgdboc.c
lantiq.c
m32r_sio_reg.h	m32r: relocate drivers back out of 8250 dir	2012-02-08 15:04:32 -08:00
m32r_sio.c	TTY: remove serialP.h inclusion from some files	2012-03-08 11:47:02 -08:00
m32r_sio.h	TTY: serial, include pci.h in m32r_sio	2012-03-08 11:47:02 -08:00
Makefile	Merge tag 'tty-3.3-rc3' tty-next	2012-02-10 10:25:27 -08:00
max3100.c
max3107.c
max3107.h
mcf.c
mfd.c	simple_open: automatically convert to simple_open()	2012-04-05 15:25:50 -07:00
mpc52xx_uart.c	mpc5200b/uart: select more tolerant uart prescaler on low baudrates	2012-03-08 13:15:50 -08:00
mpsc.c
mrst_max3110.c
mrst_max3110.h
msm_serial_hs.c	Remove all #inclusions of asm/system.h	2012-03-28 18:30:03 +01:00
msm_serial.c
msm_serial.h
msm_smd_tty.c	TTY: remove re-assignments to tty_driver members	2012-03-08 11:37:58 -08:00
mux.c	tty/serial/mux.c: linux/tty.h included twice	2012-02-24 13:50:45 -08:00
mxs-auart.c
netx-serial.c
nwpserial.c
of_serial.c	tegra, serial8250: add ->handle_break() uart_port op	2012-04-18 15:07:53 -07:00
omap-serial.c	Merge 3.4-rc3 into tty-next	2012-04-18 15:57:31 -07:00
pch_uart.c	Merge 3.4-rc4 into tty-next	2012-04-23 09:39:23 -07:00
pmac_zilog.c	serial: Kill off NO_IRQ	2012-01-26 17:14:50 -08:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	ARM: device tree work	2012-03-27 16:47:35 -07:00
sa1100.c	ARM: 7342/2: sa1100: prepare for sparse irq conversion	2012-03-25 23:57:20 +01:00
samsung.c	serial: samsung: fix omission initialize ulcon in reset port fn()	2012-04-09 10:30:39 -07:00
samsung.h
sb1250-duart.c
sc26xx.c
serial_core.c	TTY: remove re-assignments to tty_driver members	2012-03-08 11:37:58 -08:00
serial_ks8695.c
serial_txx9.c
sh-sci.c	serial: sh-sci: use serial_port_in/out vs sci_in/out.	2012-03-30 19:50:15 +09:00
sh-sci.h	serial: sh-sci: use serial_port_in/out vs sci_in/out.	2012-03-30 19:50:15 +09:00
sirfsoc_uart.c	pinctrl: API changes to support multiple states per device	2012-03-05 11:22:59 +01:00
sirfsoc_uart.h	serial/sirf: fixup for changes to pin control	2012-02-22 17:59:12 +01:00
sn_console.c	Miscellaneous Itanium patches	2012-03-23 17:19:37 -07:00
suncore.c	tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h	2012-02-10 10:44:35 -08:00
sunhv.c	Disintegrate asm/system.h for Sparc	2012-03-28 18:30:03 +01:00
sunsab.c	Disintegrate asm/system.h for Sparc	2012-03-28 18:30:03 +01:00
sunsab.h
sunsu.c	Disintegrate asm/system.h for Sparc	2012-03-28 18:30:03 +01:00
sunzilog.c	serial/sunzilog: fix keyboard on SUN SPARCstation	2012-04-04 00:37:10 -07:00
sunzilog.h
timbuart.c
timbuart.h
uartlite.c
ucc_uart.c	serial: Kill off NO_IRQ	2012-01-26 17:14:50 -08:00
vr41xx_siu.c	serial: Kill off NO_IRQ	2012-01-26 17:14:50 -08:00
vt8500_serial.c	tty: serial: vt8500: fix annotations for probe/remove	2012-03-12 10:21:55 -07:00
xilinx_uartps.c
zs.c	Remove all #inclusions of asm/system.h	2012-03-28 18:30:03 +01:00
zs.h