AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 08:27:01 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f99d70690e
linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_sprite.c
Daniel Vetter f99d70690e drm/i915: Track frontbuffer invalidation/flushing 
So these are the guts of the new beast. This tracks when a frontbuffer
gets invalidated (due to frontbuffer rendering) and hence should be
constantly scaned out, and when it's flushed again and can be
compressed/one-shot-upload.

Rules for flushing are simple: The frontbuffer needs one more full
upload starting from the next vblank. Which means that the flushing
can _only_ be called once the frontbuffer update has been latched.

But this poses a problem for pageflips: We can't just delay the
flushing until the pageflip is latched, since that would pose the risk
that we override frontbuffer rendering that has been scheduled
in-between the pageflip ioctl and the actual latching.

To handle this track asynchronous invalidations (and also pageflip)
state per-ring and delay any in-between flushing until the rendering
has completed. And also cancel any delayed flushing if we get a new
invalidation request (whether delayed or not).

Also call intel_mark_fb_busy in both cases in all cases to make sure
that we keep the screen at the highest refresh rate both on flips,
synchronous plane updates and for frontbuffer rendering.

v2: Lots of improvements

Suggestions from Chris:
- Move invalidate/flush in flush_*_domain and set_to_*_domain.
- Drop the flush in busy_ioctl since it's redundant. Was a leftover
  from an earlier concept to track flips/delayed flushes.
- Don't forget about the initial modeset enable/final disable.
  Suggested by Chris.

Track flips accurately, too. Since flips complete independently of
rendering we need to track pending flips in a separate mask. Again if
an invalidate happens we need to cancel the evenutal flush to avoid
races.

v3:
Provide correct header declarations for flip functions. Currently not
needed outside of intel_display.c, but part of the proper interface.

v4: Add proper domain management to fbcon so that the fbcon buffer is
also tracked correctly.

v5: Fixup locking around the fbcon set_to_gtt_domain call.

v6: More comments from Chris:
- Split out fbcon changes.
- Drop superflous checks for potential scanout before calling intel_fb
  functions - we can micro-optimize this later.
- s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem
  object. We already have precedence for fb_obj in the pin_and_fence
  functions.

v7: Clarify the semantics of the flip flush handling by renaming
things a bit:
- Don't go through a gem object but take the relevant frontbuffer bits
  directly. These functions center on the plane, the actual object is
  irrelevant - even a flip to the same object as already active should
  cause a flush.
- Add a new intel_frontbuffer_flip for synchronous plane updates. It
  currently just calls intel_frontbuffer_flush since the implemenation
  differs.

This way we achieve a clear split between one-shot update events on
one side and frontbuffer rendering with potentially a very long delay
between the invalidate and flush.

Chris and I also had some discussions about mark_busy and whether it
is appropriate to call from flush. But mark busy is a state which
should be derived from the 3 events (invalidate, flush, flip) we now
have by the users, like psr does by tracking relevant information in
psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for
frontbuffer) needs to have similar logic. With that the overall
mark_busy in the core could be removed.

v8: Only when retiring gpu buffers only flush frontbuffer bits we
actually invalidated in a batch. Just for safety since before any
additional usage/invalidate we should always retire current rendering.
Suggested by Chris Wilson.

v9: Actually use intel_frontbuffer_flip in all appropriate places.
Spotted by Chris.

v10: Address more comments from Chris:
- Don't call _flip in set_base when the crtc is inactive, avoids redunancy
  in the modeset case with the initial enabling of all planes.
- Add comments explaining that the initial/final plane enable/disable
  still has work left to do before it's fully generic.

v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris.

v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 18:14:47 +02:00

1316 lines
35 KiB
C
Raw Blame History

/*
* Copyright © 2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Jesse Barnes <jbarnes@virtuousgeek.org>
*
* New plane/sprite handling.
*
* The older chips had a separate interface for programming plane related
* registers; newer ones are much simpler and we can use the new DRM plane
* support.
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_rect.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs)
{
/* paranoia */
if (!mode->crtc_htotal)
return 1;
return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal);
}
static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
enum pipe pipe = crtc->pipe;
long timeout = msecs_to_jiffies_timeout(1);
int scanline, min, max, vblank_start;
DEFINE_WAIT(wait);
WARN_ON(!drm_modeset_is_locked(&crtc->base.mutex));
vblank_start = mode->crtc_vblank_start;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vblank_start = DIV_ROUND_UP(vblank_start, 2);
/* FIXME needs to be calibrated sensibly */
min = vblank_start - usecs_to_scanlines(mode, 100);
max = vblank_start - 1;
if (min <= 0 || max <= 0)
return false;
if (WARN_ON(drm_vblank_get(dev, pipe)))
return false;
local_irq_disable();
trace_i915_pipe_update_start(crtc, min, max);
for (;;) {
/*
* prepare_to_wait() has a memory barrier, which guarantees
* other CPUs can see the task state update by the time we
* read the scanline.
*/
prepare_to_wait(&crtc->vbl_wait, &wait, TASK_UNINTERRUPTIBLE);
scanline = intel_get_crtc_scanline(crtc);
if (scanline < min || scanline > max)
break;
if (timeout <= 0) {
DRM_ERROR("Potential atomic update failure on pipe %c\n",
pipe_name(crtc->pipe));
break;
}
local_irq_enable();
timeout = schedule_timeout(timeout);
local_irq_disable();
}
finish_wait(&crtc->vbl_wait, &wait);
drm_vblank_put(dev, pipe);
*start_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count);
return true;
}
static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
enum pipe pipe = crtc->pipe;
u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_end(crtc, end_vbl_count);
local_irq_enable();
if (start_vbl_count != end_vbl_count)
DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n",
pipe_name(pipe), start_vbl_count, end_vbl_count);
}
static void intel_update_primary_plane(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
int reg = DSPCNTR(crtc->plane);
if (crtc->primary_enabled)
I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE);
else
I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
}
static void
vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
sprctl = I915_READ(SPCNTR(pipe, plane));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SP_PIXFORMAT_MASK;
sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
sprctl &= ~SP_TILED;
switch (fb->pixel_format) {
case DRM_FORMAT_YUYV:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
break;
case DRM_FORMAT_RGB565:
sprctl |= SP_FORMAT_BGR565;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SP_FORMAT_BGRX8888;
break;
case DRM_FORMAT_ARGB8888:
sprctl |= SP_FORMAT_BGRA8888;
break;
case DRM_FORMAT_XBGR2101010:
sprctl |= SP_FORMAT_RGBX1010102;
break;
case DRM_FORMAT_ABGR2101010:
sprctl |= SP_FORMAT_RGBA1010102;
break;
case DRM_FORMAT_XBGR8888:
sprctl |= SP_FORMAT_RGBX8888;
break;
case DRM_FORMAT_ABGR8888:
sprctl |= SP_FORMAT_RGBA8888;
break;
default:
/*
* If we get here one of the upper layers failed to filter
* out the unsupported plane formats
*/
BUG();
break;
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SP_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SP_TILED;
sprctl |= SP_ENABLE;
intel_update_sprite_watermarks(dplane, crtc, src_w, pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset = intel_gen4_compute_page_offset(&x, &y,
obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= sprsurf_offset;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
else
I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(SPCNTR(pipe, plane), sprctl);
I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
~SP_ENABLE);
/* Activate double buffered register update */
I915_WRITE(SPSURF(pipe, plane), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
intel_update_sprite_watermarks(dplane, crtc, 0, 0, false, false);
}
static int
vlv_update_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
if (key->flags & I915_SET_COLORKEY_DESTINATION)
return -EINVAL;
I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
sprctl = I915_READ(SPCNTR(pipe, plane));
sprctl &= ~SP_SOURCE_KEY;
if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SP_SOURCE_KEY;
I915_WRITE(SPCNTR(pipe, plane), sprctl);
POSTING_READ(SPKEYMSK(pipe, plane));
return 0;
}
static void
vlv_get_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
key->min_value = I915_READ(SPKEYMINVAL(pipe, plane));
key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane));
key->channel_mask = I915_READ(SPKEYMSK(pipe, plane));
sprctl = I915_READ(SPCNTR(pipe, plane));
if (sprctl & SP_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
sprctl = I915_READ(SPRCTL(pipe));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SPRITE_PIXFORMAT_MASK;
sprctl &= ~SPRITE_RGB_ORDER_RGBX;
sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
sprctl &= ~SPRITE_TILED;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SPRITE_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SPRITE_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SPRITE_TILED;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE;
else
sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
sprctl |= SPRITE_ENABLE;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl |= SPRITE_PIPE_CSC_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
if (crtc_w != src_w || crtc_h != src_h)
sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= sprsurf_offset;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
* register */
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
else if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(SPRLINOFF(pipe), linear_offset);
I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), sprscale);
I915_WRITE(SPRCTL(pipe), sprctl);
I915_WRITE(SPRSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
/* Can't leave the scaler enabled... */
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), 0);
/* Activate double buffered register update */
I915_WRITE(SPRSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_wait_for_vblank(dev, pipe);
intel_update_sprite_watermarks(plane, crtc, 0, 0, false, false);
}
static int
ivb_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask);
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
sprctl |= SPRITE_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SPRITE_SOURCE_KEY;
I915_WRITE(SPRCTL(intel_plane->pipe), sprctl);
POSTING_READ(SPRKEYMSK(intel_plane->pipe));
return ret;
}
static void
ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe));
key->flags = 0;
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
if (sprctl & SPRITE_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (sprctl & SPRITE_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
unsigned long dvssurf_offset, linear_offset;
u32 dvscntr, dvsscale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
dvscntr = I915_READ(DVSCNTR(pipe));
/* Mask out pixel format bits in case we change it */
dvscntr &= ~DVS_PIXFORMAT_MASK;
dvscntr &= ~DVS_RGB_ORDER_XBGR;
dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
dvscntr &= ~DVS_TILED;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
break;
case DRM_FORMAT_XRGB8888:
dvscntr |= DVS_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
dvscntr |= DVS_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
dvscntr |= DVS_TILED;
if (IS_GEN6(dev))
dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */
dvscntr |= DVS_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
dvsscale = 0;
if (crtc_w != src_w || crtc_h != src_h)
dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
dvssurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= dvssurf_offset;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(DVSLINOFF(pipe), linear_offset);
I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
I915_WRITE(DVSSCALE(pipe), dvsscale);
I915_WRITE(DVSCNTR(pipe), dvscntr);
I915_WRITE(DVSSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
/* Disable the scaler */
I915_WRITE(DVSSCALE(pipe), 0);
/* Flush double buffered register updates */
I915_WRITE(DVSSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_wait_for_vblank(dev, pipe);
intel_update_sprite_watermarks(plane, crtc, 0, 0, false, false);
}
static void
intel_post_enable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_enable_ips(intel_crtc);
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
mutex_unlock(&dev->struct_mutex);
}
static void
intel_pre_disable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
mutex_lock(&dev->struct_mutex);
if (dev_priv->fbc.plane == intel_crtc->plane)
intel_disable_fbc(dev);
mutex_unlock(&dev->struct_mutex);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_disable_ips(intel_crtc);
}
static int
ilk_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask);
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
dvscntr |= DVS_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
dvscntr |= DVS_SOURCE_KEY;
I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr);
POSTING_READ(DVSKEYMSK(intel_plane->pipe));
return ret;
}
static void
ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe));
key->flags = 0;
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
if (dvscntr & DVS_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (dvscntr & DVS_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static bool
format_is_yuv(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUYV:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
case DRM_FORMAT_YVYU:
return true;
default:
return false;
}
}
static bool colorkey_enabled(struct intel_plane *intel_plane)
{
struct drm_intel_sprite_colorkey key;
intel_plane->get_colorkey(&intel_plane->base, &key);
return key.flags != I915_SET_COLORKEY_NONE;
}
static int
intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
enum pipe pipe = intel_crtc->pipe;
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
struct drm_i915_gem_object *old_obj = intel_plane->obj;
int ret;
bool primary_enabled;
bool visible;
int hscale, vscale;
int max_scale, min_scale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
struct drm_rect src = {
/* sample coordinates in 16.16 fixed point */
.x1 = src_x,
.x2 = src_x + src_w,
.y1 = src_y,
.y2 = src_y + src_h,
};
struct drm_rect dst = {
/* integer pixels */
.x1 = crtc_x,
.x2 = crtc_x + crtc_w,
.y1 = crtc_y,
.y2 = crtc_y + crtc_h,
};
const struct drm_rect clip = {
.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
};
const struct {
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
} orig = {
.crtc_x = crtc_x,
.crtc_y = crtc_y,
.crtc_w = crtc_w,
.crtc_h = crtc_h,
.src_x = src_x,
.src_y = src_y,
.src_w = src_w,
.src_h = src_h,
};
/* Don't modify another pipe's plane */
if (intel_plane->pipe != intel_crtc->pipe) {
DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n");
return -EINVAL;
}
/* FIXME check all gen limits */
if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n");
return -EINVAL;
}
/* Sprite planes can be linear or x-tiled surfaces */
switch (obj->tiling_mode) {
case I915_TILING_NONE:
case I915_TILING_X:
break;
default:
DRM_DEBUG_KMS("Unsupported tiling mode\n");
return -EINVAL;
}
/*
* FIXME the following code does a bunch of fuzzy adjustments to the
* coordinates and sizes. We probably need some way to decide whether
* more strict checking should be done instead.
*/
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
BUG_ON(hscale < 0);
vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale);
BUG_ON(vscale < 0);
visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale);
crtc_x = dst.x1;
crtc_y = dst.y1;
crtc_w = drm_rect_width(&dst);
crtc_h = drm_rect_height(&dst);
if (visible) {
/* check again in case clipping clamped the results */
hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale);
if (hscale < 0) {
DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
drm_rect_debug_print(&src, true);
drm_rect_debug_print(&dst, false);
return hscale;
}
vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale);
if (vscale < 0) {
DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
drm_rect_debug_print(&src, true);
drm_rect_debug_print(&dst, false);
return vscale;
}
/* Make the source viewport size an exact multiple of the scaling factors. */
drm_rect_adjust_size(&src,
drm_rect_width(&dst) * hscale - drm_rect_width(&src),
drm_rect_height(&dst) * vscale - drm_rect_height(&src));
/* sanity check to make sure the src viewport wasn't enlarged */
WARN_ON(src.x1 < (int) src_x ||
src.y1 < (int) src_y ||
src.x2 > (int) (src_x + src_w) ||
src.y2 > (int) (src_y + src_h));
/*
* Hardware doesn't handle subpixel coordinates.
* Adjust to (macro)pixel boundary, but be careful not to
* increase the source viewport size, because that could
* push the downscaling factor out of bounds.
*/
src_x = src.x1 >> 16;
src_w = drm_rect_width(&src) >> 16;
src_y = src.y1 >> 16;
src_h = drm_rect_height(&src) >> 16;
if (format_is_yuv(fb->pixel_format)) {
src_x &= ~1;
src_w &= ~1;
/*
* Must keep src and dst the
* same if we can't scale.
*/
if (!intel_plane->can_scale)
crtc_w &= ~1;
if (crtc_w == 0)
visible = false;
}
}
/* Check size restrictions when scaling */
if (visible && (src_w != crtc_w || src_h != crtc_h)) {
unsigned int width_bytes;
WARN_ON(!intel_plane->can_scale);
/* FIXME interlacing min height is 6 */
if (crtc_w < 3 || crtc_h < 3)
visible = false;
if (src_w < 3 || src_h < 3)
visible = false;
width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size;
if (src_w > 2048 || src_h > 2048 ||
width_bytes > 4096 || fb->pitches[0] > 4096) {
DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
return -EINVAL;
}
}
dst.x1 = crtc_x;
dst.x2 = crtc_x + crtc_w;
dst.y1 = crtc_y;
dst.y2 = crtc_y + crtc_h;
/*
* If the sprite is completely covering the primary plane,
* we can disable the primary and save power.
*/
primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane);
WARN_ON(!primary_enabled && !visible && intel_crtc->active);
mutex_lock(&dev->struct_mutex);
/* Note that this will apply the VT-d workaround for scanouts,
* which is more restrictive than required for sprites. (The
* primary plane requires 256KiB alignment with 64 PTE padding,
* the sprite planes only require 128KiB alignment and 32 PTE padding.
*/
ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
i915_gem_track_fb(old_obj, obj,
INTEL_FRONTBUFFER_SPRITE(pipe));
mutex_unlock(&dev->struct_mutex);
if (ret)
return ret;
intel_plane->crtc_x = orig.crtc_x;
intel_plane->crtc_y = orig.crtc_y;
intel_plane->crtc_w = orig.crtc_w;
intel_plane->crtc_h = orig.crtc_h;
intel_plane->src_x = orig.src_x;
intel_plane->src_y = orig.src_y;
intel_plane->src_w = orig.src_w;
intel_plane->src_h = orig.src_h;
intel_plane->obj = obj;
if (intel_crtc->active) {
bool primary_was_enabled = intel_crtc->primary_enabled;
intel_crtc->primary_enabled = primary_enabled;
if (primary_was_enabled != primary_enabled)
intel_crtc_wait_for_pending_flips(crtc);
if (primary_was_enabled && !primary_enabled)
intel_pre_disable_primary(crtc);
if (visible)
intel_plane->update_plane(plane, crtc, fb, obj,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
else
intel_plane->disable_plane(plane, crtc);
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_SPRITE(pipe));
if (!primary_was_enabled && primary_enabled)
intel_post_enable_primary(crtc);
}
/* Unpin old obj after new one is active to avoid ugliness */
if (old_obj) {
/*
* It's fairly common to simply update the position of
* an existing object. In that case, we don't need to
* wait for vblank to avoid ugliness, we only need to
* do the pin & ref bookkeeping.
*/
if (old_obj != obj && intel_crtc->active)
intel_wait_for_vblank(dev, intel_crtc->pipe);
mutex_lock(&dev->struct_mutex);
intel_unpin_fb_obj(old_obj);
mutex_unlock(&dev->struct_mutex);
}
return 0;
}
static int
intel_disable_plane(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc;
enum pipe pipe;
if (!plane->fb)
return 0;
if (WARN_ON(!plane->crtc))
return -EINVAL;
intel_crtc = to_intel_crtc(plane->crtc);
pipe = intel_crtc->pipe;
if (intel_crtc->active) {
bool primary_was_enabled = intel_crtc->primary_enabled;
intel_crtc->primary_enabled = true;
intel_plane->disable_plane(plane, plane->crtc);
if (!primary_was_enabled && intel_crtc->primary_enabled)
intel_post_enable_primary(plane->crtc);
}
if (intel_plane->obj) {
if (intel_crtc->active)
intel_wait_for_vblank(dev, intel_plane->pipe);
mutex_lock(&dev->struct_mutex);
intel_unpin_fb_obj(intel_plane->obj);
i915_gem_track_fb(intel_plane->obj, NULL,
INTEL_FRONTBUFFER_SPRITE(pipe));
mutex_unlock(&dev->struct_mutex);
intel_plane->obj = NULL;
}
return 0;
}
static void intel_destroy_plane(struct drm_plane *plane)
{
struct intel_plane *intel_plane = to_intel_plane(plane);
intel_disable_plane(plane);
drm_plane_cleanup(plane);
kfree(intel_plane);
}
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *set = data;
struct drm_mode_object *obj;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
/* Make sure we don't try to enable both src & dest simultaneously */
if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
return -EINVAL;
drm_modeset_lock_all(dev);
obj = drm_mode_object_find(dev, set->plane_id, DRM_MODE_OBJECT_PLANE);
if (!obj) {
ret = -ENOENT;
goto out_unlock;
}
plane = obj_to_plane(obj);
intel_plane = to_intel_plane(plane);
ret = intel_plane->update_colorkey(plane, set);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *get = data;
struct drm_mode_object *obj;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
drm_modeset_lock_all(dev);
obj = drm_mode_object_find(dev, get->plane_id, DRM_MODE_OBJECT_PLANE);
if (!obj) {
ret = -ENOENT;
goto out_unlock;
}
plane = obj_to_plane(obj);
intel_plane = to_intel_plane(plane);
intel_plane->get_colorkey(plane, get);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
void intel_plane_restore(struct drm_plane *plane)
{
struct intel_plane *intel_plane = to_intel_plane(plane);
if (!plane->crtc || !plane->fb)
return;
intel_update_plane(plane, plane->crtc, plane->fb,
intel_plane->crtc_x, intel_plane->crtc_y,
intel_plane->crtc_w, intel_plane->crtc_h,
intel_plane->src_x, intel_plane->src_y,
intel_plane->src_w, intel_plane->src_h);
}
void intel_plane_disable(struct drm_plane *plane)
{
if (!plane->crtc || !plane->fb)
return;
intel_disable_plane(plane);
}
static const struct drm_plane_funcs intel_plane_funcs = {
.update_plane = intel_update_plane,
.disable_plane = intel_disable_plane,
.destroy = intel_destroy_plane,
};
static uint32_t ilk_plane_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t snb_plane_formats[] = {
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t vlv_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR2101010,
DRM_FORMAT_ABGR2101010,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
int
intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
{
struct intel_plane *intel_plane;
unsigned long possible_crtcs;
const uint32_t *plane_formats;
int num_plane_formats;
int ret;
if (INTEL_INFO(dev)->gen < 5)
return -ENODEV;
intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL);
if (!intel_plane)
return -ENOMEM;
switch (INTEL_INFO(dev)->gen) {
case 5:
case 6:
intel_plane->can_scale = true;
intel_plane->max_downscale = 16;
intel_plane->update_plane = ilk_update_plane;
intel_plane->disable_plane = ilk_disable_plane;
intel_plane->update_colorkey = ilk_update_colorkey;
intel_plane->get_colorkey = ilk_get_colorkey;
if (IS_GEN6(dev)) {
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
} else {
plane_formats = ilk_plane_formats;
num_plane_formats = ARRAY_SIZE(ilk_plane_formats);
}
break;
case 7:
case 8:
if (IS_IVYBRIDGE(dev)) {
intel_plane->can_scale = true;
intel_plane->max_downscale = 2;
} else {
intel_plane->can_scale = false;
intel_plane->max_downscale = 1;
}
if (IS_VALLEYVIEW(dev)) {
intel_plane->update_plane = vlv_update_plane;
intel_plane->disable_plane = vlv_disable_plane;
intel_plane->update_colorkey = vlv_update_colorkey;
intel_plane->get_colorkey = vlv_get_colorkey;
plane_formats = vlv_plane_formats;
num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
} else {
intel_plane->update_plane = ivb_update_plane;
intel_plane->disable_plane = ivb_disable_plane;
intel_plane->update_colorkey = ivb_update_colorkey;
intel_plane->get_colorkey = ivb_get_colorkey;
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
}
break;
default:
kfree(intel_plane);
return -ENODEV;
}
intel_plane->pipe = pipe;
intel_plane->plane = plane;
possible_crtcs = (1 << pipe);
ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
&intel_plane_funcs,
plane_formats, num_plane_formats,
false);
if (ret)
kfree(intel_plane);
return ret;
}
Reference in New Issue View Git Blame Copy Permalink