mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 10:15:13 +07:00
3b79919946
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
358 lines
6.8 KiB
Plaintext
358 lines
6.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree file for NETGEAR ReadyNAS 2120
|
|
*
|
|
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-xp-mv78230.dtsi"
|
|
|
|
/ {
|
|
model = "NETGEAR ReadyNAS 2120";
|
|
compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0x00000000 0 0x80000000>; /* 2GB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
|
|
|
|
internal-regs {
|
|
|
|
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
|
|
rtc@10300 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@11000 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
/* Controller for rear fan #1 of 3 (Protechnic
|
|
* MGT4012XB-O20, 8000RPM) near eSATA port */
|
|
g762_fan1: g762@3e {
|
|
compatible = "gmt,g762";
|
|
reg = <0x3e>;
|
|
clocks = <&g762_clk>; /* input clock */
|
|
fan_gear_mode = <0>;
|
|
fan_startv = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
|
|
/* Controller for rear (center) fan #2 of 3 */
|
|
g762_fan2: g762@48 {
|
|
compatible = "gmt,g762";
|
|
reg = <0x48>;
|
|
clocks = <&g762_clk>; /* input clock */
|
|
fan_gear_mode = <0>;
|
|
fan_startv = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
|
|
/* Controller for rear fan #3 of 3 */
|
|
g762_fan3: g762@49 {
|
|
compatible = "gmt,g762";
|
|
reg = <0x49>;
|
|
clocks = <&g762_clk>; /* input clock */
|
|
fan_gear_mode = <0>;
|
|
fan_startv = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
|
|
/* Temperature sensor */
|
|
g751: g751@4c {
|
|
compatible = "gmt,g751";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
isl12057: rtc@68 {
|
|
compatible = "isil,isl12057";
|
|
reg = <0x68>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Front USB 2.0 port */
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
/* Two rear eSATA ports */
|
|
sata@a0000 {
|
|
nr-ports = <2>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
g762_clk: g762-oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
|
|
&sata3_led_pin &sata4_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
red-sata1-led {
|
|
label = "rn2120:red:sata1";
|
|
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red-sata2-led {
|
|
label = "rn2120:red:sata2";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red-sata3-led {
|
|
label = "rn2120:red:sata3";
|
|
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red-sata4-led {
|
|
label = "rn2120:red:sata4";
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red-err-led {
|
|
label = "rn2120:red:err";
|
|
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&power_button_pin &reset_button_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
power-button {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&poweroff>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
/* Connected to first Marvell 88SE9170 SATA controller */
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to second Marvell 88SE9170 SATA controller */
|
|
pcie@2,0 {
|
|
/* Port 0, Lane 1 */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to Fresco Logic FL1009 USB 3.0 controller */
|
|
pcie@5,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
|
|
&pinctrl {
|
|
poweroff: poweroff {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_button_pin: power-button-pin {
|
|
marvell,pins = "mpp27";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
reset_button_pin: reset-button-pin {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata1_led_pin: sata1-led-pin {
|
|
marvell,pins = "mpp31";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata2_led_pin: sata2-led-pin {
|
|
marvell,pins = "mpp40";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata3_led_pin: sata3-led-pin {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata4_led_pin: sata4-led-pin {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata1_power_pin: sata1-power-pin {
|
|
marvell,pins = "mpp24";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata2_power_pin: sata2-power-pin {
|
|
marvell,pins = "mpp25";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata3_power_pin: sata3-power-pin {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata4_power_pin: sata4-power-pin {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata1_pres_pin: sata1-pres-pin {
|
|
marvell,pins = "mpp32";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata2_pres_pin: sata2-pres-pin {
|
|
marvell,pins = "mpp33";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata3_pres_pin: sata3-pres-pin {
|
|
marvell,pins = "mpp34";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata4_pres_pin: sata4-pres-pin {
|
|
marvell,pins = "mpp35";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
err_led_pin: err-led-pin {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
label = "pxa3xx_nand-0";
|
|
nand-rb = <0>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
|
|
/* Use Hardware BCH ECC */
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x180000>; /* 1.5MB */
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "u-boot-env";
|
|
reg = <0x180000 0x20000>; /* 128KB */
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "uImage";
|
|
reg = <0x0200000 0x600000>; /* 6MB */
|
|
};
|
|
|
|
partition@800000 {
|
|
label = "minirootfs";
|
|
reg = <0x0800000 0x400000>; /* 4MB */
|
|
};
|
|
|
|
/* Last MB is for the BBT, i.e. not writable */
|
|
partition@c00000 {
|
|
label = "ubifs";
|
|
reg = <0x0c00000 0x7400000>; /* 116MB */
|
|
};
|
|
};
|
|
};
|
|
};
|