mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-10 13:16:40 +07:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
237 lines
5.1 KiB
C
237 lines
5.1 KiB
C
#define AUTOSENSE
|
|
/* #define PSEUDO_DMA */
|
|
|
|
/*
|
|
* EcoSCSI Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995, Russell King
|
|
*
|
|
* ALPHA RELEASE 1.
|
|
*
|
|
* For more information, please consult
|
|
*
|
|
* NCR 5380 Family
|
|
* SCSI Protocol Controller
|
|
* Databook
|
|
*
|
|
* NCR Microelectronics
|
|
* 1635 Aeroplaza Drive
|
|
* Colorado Springs, CO 80916
|
|
* 1+ (719) 578-3400
|
|
* 1+ (800) 334-5454
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "../scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#define NCR5380_implementation_fields int port, ctrl
|
|
#define NCR5380_local_declare() struct Scsi_Host *_instance
|
|
#define NCR5380_setup(instance) _instance = instance
|
|
|
|
#define NCR5380_read(reg) ecoscsi_read(_instance, reg)
|
|
#define NCR5380_write(reg, value) ecoscsi_write(_instance, reg, value)
|
|
|
|
#define NCR5380_intr ecoscsi_intr
|
|
#define NCR5380_queue_command ecoscsi_queue_command
|
|
#define NCR5380_proc_info ecoscsi_proc_info
|
|
|
|
#include "../NCR5380.h"
|
|
|
|
#define ECOSCSI_PUBLIC_RELEASE 1
|
|
|
|
static char ecoscsi_read(struct Scsi_Host *instance, int reg)
|
|
{
|
|
int iobase = instance->io_port;
|
|
outb(reg | 8, iobase);
|
|
return inb(iobase + 1);
|
|
}
|
|
|
|
static void ecoscsi_write(struct Scsi_Host *instance, int reg, int value)
|
|
{
|
|
int iobase = instance->io_port;
|
|
outb(reg | 8, iobase);
|
|
outb(value, iobase + 1);
|
|
}
|
|
|
|
/*
|
|
* Function : ecoscsi_setup(char *str, int *ints)
|
|
*
|
|
* Purpose : LILO command line initialization of the overrides array,
|
|
*
|
|
* Inputs : str - unused, ints - array of integer parameters with ints[0]
|
|
* equal to the number of ints.
|
|
*
|
|
*/
|
|
|
|
void ecoscsi_setup(char *str, int *ints)
|
|
{
|
|
}
|
|
|
|
const char * ecoscsi_info (struct Scsi_Host *spnt)
|
|
{
|
|
return "";
|
|
}
|
|
|
|
#if 0
|
|
#define STAT(p) inw(p + 144)
|
|
|
|
static inline int NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr,
|
|
int len)
|
|
{
|
|
int iobase = host->io_port;
|
|
printk("writing %p len %d\n",addr, len);
|
|
if(!len) return -1;
|
|
|
|
while(1)
|
|
{
|
|
int status;
|
|
while(((status = STAT(iobase)) & 0x100)==0);
|
|
}
|
|
}
|
|
|
|
static inline int NCR5380_pread(struct Scsi_Host *host, unsigned char *addr,
|
|
int len)
|
|
{
|
|
int iobase = host->io_port;
|
|
int iobase2= host->io_port + 0x100;
|
|
unsigned char *start = addr;
|
|
int s;
|
|
printk("reading %p len %d\n",addr, len);
|
|
outb(inb(iobase + 128), iobase + 135);
|
|
while(len > 0)
|
|
{
|
|
int status,b,i, timeout;
|
|
timeout = 0x07FFFFFF;
|
|
while(((status = STAT(iobase)) & 0x100)==0)
|
|
{
|
|
timeout--;
|
|
if(status & 0x200 || !timeout)
|
|
{
|
|
printk("status = %p\n",status);
|
|
outb(0, iobase + 135);
|
|
return 1;
|
|
}
|
|
}
|
|
if(len >= 128)
|
|
{
|
|
for(i=0; i<64; i++)
|
|
{
|
|
b = inw(iobase + 136);
|
|
*addr++ = b;
|
|
*addr++ = b>>8;
|
|
}
|
|
len -= 128;
|
|
}
|
|
else
|
|
{
|
|
b = inw(iobase + 136);
|
|
*addr ++ = b;
|
|
len -= 1;
|
|
if(len)
|
|
*addr ++ = b>>8;
|
|
len -= 1;
|
|
}
|
|
}
|
|
outb(0, iobase + 135);
|
|
printk("first bytes = %02X %02X %02X %20X %02X %02X %02X\n",*start, start[1], start[2], start[3], start[4], start[5], start[6]);
|
|
return 1;
|
|
}
|
|
#endif
|
|
#undef STAT
|
|
|
|
#define BOARD_NORMAL 0
|
|
#define BOARD_NCR53C400 1
|
|
|
|
#include "../NCR5380.c"
|
|
|
|
static struct scsi_host_template ecoscsi_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "Serial Port EcoSCSI NCR5380",
|
|
.proc_name = "ecoscsi",
|
|
.info = ecoscsi_info,
|
|
.queuecommand = ecoscsi_queue_command,
|
|
.eh_abort_handler = NCR5380_abort,
|
|
.eh_bus_reset_handler = NCR5380_bus_reset,
|
|
.can_queue = 16,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = DISABLE_CLUSTERING
|
|
};
|
|
|
|
static struct Scsi_Host *host;
|
|
|
|
static int __init ecoscsi_init(void)
|
|
{
|
|
|
|
host = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata));
|
|
if (!host)
|
|
return 0;
|
|
|
|
host->io_port = 0x80ce8000;
|
|
host->n_io_port = 144;
|
|
host->irq = IRQ_NONE;
|
|
|
|
if (!(request_region(host->io_port, host->n_io_port, "ecoscsi")) )
|
|
goto unregister_scsi;
|
|
|
|
ecoscsi_write(host, MODE_REG, 0x20); /* Is it really SCSI? */
|
|
if (ecoscsi_read(host, MODE_REG) != 0x20) /* Write to a reg. */
|
|
goto release_reg;
|
|
|
|
ecoscsi_write(host, MODE_REG, 0x00 ); /* it back. */
|
|
if (ecoscsi_read(host, MODE_REG) != 0x00)
|
|
goto release_reg;
|
|
|
|
NCR5380_init(host, 0);
|
|
|
|
printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port);
|
|
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
|
|
host->can_queue, host->cmd_per_lun, ECOSCSI_PUBLIC_RELEASE);
|
|
printk("\nscsi%d:", host->host_no);
|
|
NCR5380_print_options(host);
|
|
printk("\n");
|
|
|
|
scsi_add_host(host, NULL); /* XXX handle failure */
|
|
scsi_scan_host(host);
|
|
return 0;
|
|
|
|
release_reg:
|
|
release_region(host->io_port, host->n_io_port);
|
|
unregister_scsi:
|
|
scsi_host_put(host);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit ecoscsi_exit(void)
|
|
{
|
|
scsi_remove_host(host);
|
|
|
|
if (shpnt->irq != IRQ_NONE)
|
|
free_irq(shpnt->irq, NULL);
|
|
NCR5380_exit(host);
|
|
if (shpnt->io_port)
|
|
release_region(shpnt->io_port, shpnt->n_io_port);
|
|
|
|
scsi_host_put(host);
|
|
return 0;
|
|
}
|
|
|
|
module_init(ecoscsi_init);
|
|
module_exit(ecoscsi_exit);
|
|
|
|
MODULE_AUTHOR("Russell King");
|
|
MODULE_DESCRIPTION("Econet-SCSI driver for Acorn machines");
|
|
MODULE_LICENSE("GPL");
|
|
|