mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 01:36:41 +07:00
c061b18df0
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1716 lines
45 KiB
C
1716 lines
45 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Driver for SGI's IOC3 based Ethernet cards as found in the PCI card.
|
|
*
|
|
* Copyright (C) 1999, 2000, 01, 03, 06 Ralf Baechle
|
|
* Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc.
|
|
*
|
|
* References:
|
|
* o IOC3 ASIC specification 4.51, 1996-04-18
|
|
* o IEEE 802.3 specification, 2000 edition
|
|
* o DP38840A Specification, National Semiconductor, March 1997
|
|
*
|
|
* To do:
|
|
*
|
|
* o Handle allocation failures in ioc3_alloc_skb() more gracefully.
|
|
* o Handle allocation failures in ioc3_init_rings().
|
|
* o Use prefetching for large packets. What is a good lower limit for
|
|
* prefetching?
|
|
* o We're probably allocating a bit too much memory.
|
|
* o Use hardware checksums.
|
|
* o Convert to using a IOC3 meta driver.
|
|
* o Which PHYs might possibly be attached to the IOC3 in real live,
|
|
* which workarounds are required for them? Do we ever have Lucent's?
|
|
* o For the 2.5 branch kill the mii-tool ioctls.
|
|
*/
|
|
|
|
#define IOC3_NAME "ioc3-eth"
|
|
#define IOC3_VERSION "2.6.3-4"
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/gfp.h>
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/serial_reg.h>
|
|
#endif
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/skbuff.h>
|
|
#include <net/ip.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/sn/types.h>
|
|
#include <asm/sn/ioc3.h>
|
|
#include <asm/pci/bridge.h>
|
|
|
|
/*
|
|
* 64 RX buffers. This is tunable in the range of 16 <= x < 512. The
|
|
* value must be a power of two.
|
|
*/
|
|
#define RX_BUFFS 64
|
|
|
|
#define ETCSR_FD ((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21)
|
|
#define ETCSR_HD ((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21)
|
|
|
|
/* Private per NIC data of the driver. */
|
|
struct ioc3_private {
|
|
struct ioc3 *regs;
|
|
unsigned long *rxr; /* pointer to receiver ring */
|
|
struct ioc3_etxd *txr;
|
|
struct sk_buff *rx_skbs[512];
|
|
struct sk_buff *tx_skbs[128];
|
|
int rx_ci; /* RX consumer index */
|
|
int rx_pi; /* RX producer index */
|
|
int tx_ci; /* TX consumer index */
|
|
int tx_pi; /* TX producer index */
|
|
int txqlen;
|
|
u32 emcr, ehar_h, ehar_l;
|
|
spinlock_t ioc3_lock;
|
|
struct mii_if_info mii;
|
|
unsigned long flags;
|
|
#define IOC3_FLAG_RX_CHECKSUMS 1
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
/* Members used by autonegotiation */
|
|
struct timer_list ioc3_timer;
|
|
};
|
|
|
|
static inline struct net_device *priv_netdev(struct ioc3_private *dev)
|
|
{
|
|
return (void *)dev - ((sizeof(struct net_device) + 31) & ~31);
|
|
}
|
|
|
|
static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static void ioc3_set_multicast_list(struct net_device *dev);
|
|
static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static void ioc3_timeout(struct net_device *dev);
|
|
static inline unsigned int ioc3_hash(const unsigned char *addr);
|
|
static inline void ioc3_stop(struct ioc3_private *ip);
|
|
static void ioc3_init(struct net_device *dev);
|
|
|
|
static const char ioc3_str[] = "IOC3 Ethernet";
|
|
static const struct ethtool_ops ioc3_ethtool_ops;
|
|
|
|
/* We use this to acquire receive skb's that we can DMA directly into. */
|
|
|
|
#define IOC3_CACHELINE 128UL
|
|
|
|
static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
|
|
{
|
|
return (~addr + 1) & (IOC3_CACHELINE - 1UL);
|
|
}
|
|
|
|
static inline struct sk_buff * ioc3_alloc_skb(unsigned long length,
|
|
unsigned int gfp_mask)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask);
|
|
if (likely(skb)) {
|
|
int offset = aligned_rx_skb_addr((unsigned long) skb->data);
|
|
if (offset)
|
|
skb_reserve(skb, offset);
|
|
}
|
|
|
|
return skb;
|
|
}
|
|
|
|
static inline unsigned long ioc3_map(void *ptr, unsigned long vdev)
|
|
{
|
|
#ifdef CONFIG_SGI_IP27
|
|
vdev <<= 57; /* Shift to PCI64_ATTR_VIRTUAL */
|
|
|
|
return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF |
|
|
((unsigned long)ptr & TO_PHYS_MASK);
|
|
#else
|
|
return virt_to_bus(ptr);
|
|
#endif
|
|
}
|
|
|
|
/* BEWARE: The IOC3 documentation documents the size of rx buffers as
|
|
1644 while it's actually 1664. This one was nasty to track down ... */
|
|
#define RX_OFFSET 10
|
|
#define RX_BUF_ALLOC_SIZE (1664 + RX_OFFSET + IOC3_CACHELINE)
|
|
|
|
/* DMA barrier to separate cached and uncached accesses. */
|
|
#define BARRIER() \
|
|
__asm__("sync" ::: "memory")
|
|
|
|
|
|
#define IOC3_SIZE 0x100000
|
|
|
|
/*
|
|
* IOC3 is a big endian device
|
|
*
|
|
* Unorthodox but makes the users of these macros more readable - the pointer
|
|
* to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3
|
|
* in the environment.
|
|
*/
|
|
#define ioc3_r_mcr() be32_to_cpu(ioc3->mcr)
|
|
#define ioc3_w_mcr(v) do { ioc3->mcr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_w_gpcr_s(v) do { ioc3->gpcr_s = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_emcr() be32_to_cpu(ioc3->emcr)
|
|
#define ioc3_w_emcr(v) do { ioc3->emcr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_eisr() be32_to_cpu(ioc3->eisr)
|
|
#define ioc3_w_eisr(v) do { ioc3->eisr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_eier() be32_to_cpu(ioc3->eier)
|
|
#define ioc3_w_eier(v) do { ioc3->eier = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ercsr() be32_to_cpu(ioc3->ercsr)
|
|
#define ioc3_w_ercsr(v) do { ioc3->ercsr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_erbr_h() be32_to_cpu(ioc3->erbr_h)
|
|
#define ioc3_w_erbr_h(v) do { ioc3->erbr_h = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_erbr_l() be32_to_cpu(ioc3->erbr_l)
|
|
#define ioc3_w_erbr_l(v) do { ioc3->erbr_l = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_erbar() be32_to_cpu(ioc3->erbar)
|
|
#define ioc3_w_erbar(v) do { ioc3->erbar = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ercir() be32_to_cpu(ioc3->ercir)
|
|
#define ioc3_w_ercir(v) do { ioc3->ercir = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_erpir() be32_to_cpu(ioc3->erpir)
|
|
#define ioc3_w_erpir(v) do { ioc3->erpir = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ertr() be32_to_cpu(ioc3->ertr)
|
|
#define ioc3_w_ertr(v) do { ioc3->ertr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etcsr() be32_to_cpu(ioc3->etcsr)
|
|
#define ioc3_w_etcsr(v) do { ioc3->etcsr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ersr() be32_to_cpu(ioc3->ersr)
|
|
#define ioc3_w_ersr(v) do { ioc3->ersr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etcdc() be32_to_cpu(ioc3->etcdc)
|
|
#define ioc3_w_etcdc(v) do { ioc3->etcdc = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ebir() be32_to_cpu(ioc3->ebir)
|
|
#define ioc3_w_ebir(v) do { ioc3->ebir = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etbr_h() be32_to_cpu(ioc3->etbr_h)
|
|
#define ioc3_w_etbr_h(v) do { ioc3->etbr_h = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etbr_l() be32_to_cpu(ioc3->etbr_l)
|
|
#define ioc3_w_etbr_l(v) do { ioc3->etbr_l = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etcir() be32_to_cpu(ioc3->etcir)
|
|
#define ioc3_w_etcir(v) do { ioc3->etcir = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_etpir() be32_to_cpu(ioc3->etpir)
|
|
#define ioc3_w_etpir(v) do { ioc3->etpir = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_emar_h() be32_to_cpu(ioc3->emar_h)
|
|
#define ioc3_w_emar_h(v) do { ioc3->emar_h = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_emar_l() be32_to_cpu(ioc3->emar_l)
|
|
#define ioc3_w_emar_l(v) do { ioc3->emar_l = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ehar_h() be32_to_cpu(ioc3->ehar_h)
|
|
#define ioc3_w_ehar_h(v) do { ioc3->ehar_h = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_ehar_l() be32_to_cpu(ioc3->ehar_l)
|
|
#define ioc3_w_ehar_l(v) do { ioc3->ehar_l = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_micr() be32_to_cpu(ioc3->micr)
|
|
#define ioc3_w_micr(v) do { ioc3->micr = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_midr_r() be32_to_cpu(ioc3->midr_r)
|
|
#define ioc3_w_midr_r(v) do { ioc3->midr_r = cpu_to_be32(v); } while (0)
|
|
#define ioc3_r_midr_w() be32_to_cpu(ioc3->midr_w)
|
|
#define ioc3_w_midr_w(v) do { ioc3->midr_w = cpu_to_be32(v); } while (0)
|
|
|
|
static inline u32 mcr_pack(u32 pulse, u32 sample)
|
|
{
|
|
return (pulse << 10) | (sample << 2);
|
|
}
|
|
|
|
static int nic_wait(struct ioc3 *ioc3)
|
|
{
|
|
u32 mcr;
|
|
|
|
do {
|
|
mcr = ioc3_r_mcr();
|
|
} while (!(mcr & 2));
|
|
|
|
return mcr & 1;
|
|
}
|
|
|
|
static int nic_reset(struct ioc3 *ioc3)
|
|
{
|
|
int presence;
|
|
|
|
ioc3_w_mcr(mcr_pack(500, 65));
|
|
presence = nic_wait(ioc3);
|
|
|
|
ioc3_w_mcr(mcr_pack(0, 500));
|
|
nic_wait(ioc3);
|
|
|
|
return presence;
|
|
}
|
|
|
|
static inline int nic_read_bit(struct ioc3 *ioc3)
|
|
{
|
|
int result;
|
|
|
|
ioc3_w_mcr(mcr_pack(6, 13));
|
|
result = nic_wait(ioc3);
|
|
ioc3_w_mcr(mcr_pack(0, 100));
|
|
nic_wait(ioc3);
|
|
|
|
return result;
|
|
}
|
|
|
|
static inline void nic_write_bit(struct ioc3 *ioc3, int bit)
|
|
{
|
|
if (bit)
|
|
ioc3_w_mcr(mcr_pack(6, 110));
|
|
else
|
|
ioc3_w_mcr(mcr_pack(80, 30));
|
|
|
|
nic_wait(ioc3);
|
|
}
|
|
|
|
/*
|
|
* Read a byte from an iButton device
|
|
*/
|
|
static u32 nic_read_byte(struct ioc3 *ioc3)
|
|
{
|
|
u32 result = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
result = (result >> 1) | (nic_read_bit(ioc3) << 7);
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Write a byte to an iButton device
|
|
*/
|
|
static void nic_write_byte(struct ioc3 *ioc3, int byte)
|
|
{
|
|
int i, bit;
|
|
|
|
for (i = 8; i; i--) {
|
|
bit = byte & 1;
|
|
byte >>= 1;
|
|
|
|
nic_write_bit(ioc3, bit);
|
|
}
|
|
}
|
|
|
|
static u64 nic_find(struct ioc3 *ioc3, int *last)
|
|
{
|
|
int a, b, index, disc;
|
|
u64 address = 0;
|
|
|
|
nic_reset(ioc3);
|
|
/* Search ROM. */
|
|
nic_write_byte(ioc3, 0xf0);
|
|
|
|
/* Algorithm from ``Book of iButton Standards''. */
|
|
for (index = 0, disc = 0; index < 64; index++) {
|
|
a = nic_read_bit(ioc3);
|
|
b = nic_read_bit(ioc3);
|
|
|
|
if (a && b) {
|
|
printk("NIC search failed (not fatal).\n");
|
|
*last = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (!a && !b) {
|
|
if (index == *last) {
|
|
address |= 1UL << index;
|
|
} else if (index > *last) {
|
|
address &= ~(1UL << index);
|
|
disc = index;
|
|
} else if ((address & (1UL << index)) == 0)
|
|
disc = index;
|
|
nic_write_bit(ioc3, address & (1UL << index));
|
|
continue;
|
|
} else {
|
|
if (a)
|
|
address |= 1UL << index;
|
|
else
|
|
address &= ~(1UL << index);
|
|
nic_write_bit(ioc3, a);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
*last = disc;
|
|
|
|
return address;
|
|
}
|
|
|
|
static int nic_init(struct ioc3 *ioc3)
|
|
{
|
|
const char *unknown = "unknown";
|
|
const char *type = unknown;
|
|
u8 crc;
|
|
u8 serial[6];
|
|
int save = 0, i;
|
|
|
|
while (1) {
|
|
u64 reg;
|
|
reg = nic_find(ioc3, &save);
|
|
|
|
switch (reg & 0xff) {
|
|
case 0x91:
|
|
type = "DS1981U";
|
|
break;
|
|
default:
|
|
if (save == 0) {
|
|
/* Let the caller try again. */
|
|
return -1;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
nic_reset(ioc3);
|
|
|
|
/* Match ROM. */
|
|
nic_write_byte(ioc3, 0x55);
|
|
for (i = 0; i < 8; i++)
|
|
nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff);
|
|
|
|
reg >>= 8; /* Shift out type. */
|
|
for (i = 0; i < 6; i++) {
|
|
serial[i] = reg & 0xff;
|
|
reg >>= 8;
|
|
}
|
|
crc = reg & 0xff;
|
|
break;
|
|
}
|
|
|
|
printk("Found %s NIC", type);
|
|
if (type != unknown)
|
|
printk (" registration number %pM, CRC %02x", serial, crc);
|
|
printk(".\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read the NIC (Number-In-a-Can) device used to store the MAC address on
|
|
* SN0 / SN00 nodeboards and PCI cards.
|
|
*/
|
|
static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
|
|
{
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
u8 nic[14];
|
|
int tries = 2; /* There may be some problem with the battery? */
|
|
int i;
|
|
|
|
ioc3_w_gpcr_s(1 << 21);
|
|
|
|
while (tries--) {
|
|
if (!nic_init(ioc3))
|
|
break;
|
|
udelay(500);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
printk("Failed to read MAC address\n");
|
|
return;
|
|
}
|
|
|
|
/* Read Memory. */
|
|
nic_write_byte(ioc3, 0xf0);
|
|
nic_write_byte(ioc3, 0x00);
|
|
nic_write_byte(ioc3, 0x00);
|
|
|
|
for (i = 13; i >= 0; i--)
|
|
nic[i] = nic_read_byte(ioc3);
|
|
|
|
for (i = 2; i < 8; i++)
|
|
priv_netdev(ip)->dev_addr[i - 2] = nic[i];
|
|
}
|
|
|
|
/*
|
|
* Ok, this is hosed by design. It's necessary to know what machine the
|
|
* NIC is in in order to know how to read the NIC address. We also have
|
|
* to know if it's a PCI card or a NIC in on the node board ...
|
|
*/
|
|
static void ioc3_get_eaddr(struct ioc3_private *ip)
|
|
{
|
|
ioc3_get_eaddr_nic(ip);
|
|
|
|
printk("Ethernet address is %pM.\n", priv_netdev(ip)->dev_addr);
|
|
}
|
|
|
|
static void __ioc3_set_mac_address(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
ioc3_w_emar_h((dev->dev_addr[5] << 8) | dev->dev_addr[4]);
|
|
ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) |
|
|
(dev->dev_addr[1] << 8) | dev->dev_addr[0]);
|
|
}
|
|
|
|
static int ioc3_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct sockaddr *sa = addr;
|
|
|
|
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
__ioc3_set_mac_address(dev);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Caller must hold the ioc3_lock ever for MII readers. This is also
|
|
* used to protect the transmitter side but it's low contention.
|
|
*/
|
|
static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
while (ioc3_r_micr() & MICR_BUSY);
|
|
ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
|
|
while (ioc3_r_micr() & MICR_BUSY);
|
|
|
|
return ioc3_r_midr_r() & MIDR_DATA_MASK;
|
|
}
|
|
|
|
static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
while (ioc3_r_micr() & MICR_BUSY);
|
|
ioc3_w_midr_w(data);
|
|
ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg);
|
|
while (ioc3_r_micr() & MICR_BUSY);
|
|
}
|
|
|
|
static int ioc3_mii_init(struct ioc3_private *ip);
|
|
|
|
static struct net_device_stats *ioc3_get_stats(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
dev->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK);
|
|
return &dev->stats;
|
|
}
|
|
|
|
static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
|
|
{
|
|
struct ethhdr *eh = eth_hdr(skb);
|
|
uint32_t csum, ehsum;
|
|
unsigned int proto;
|
|
struct iphdr *ih;
|
|
uint16_t *ew;
|
|
unsigned char *cp;
|
|
|
|
/*
|
|
* Did hardware handle the checksum at all? The cases we can handle
|
|
* are:
|
|
*
|
|
* - TCP and UDP checksums of IPv4 only.
|
|
* - IPv6 would be doable but we keep that for later ...
|
|
* - Only unfragmented packets. Did somebody already tell you
|
|
* fragmentation is evil?
|
|
* - don't care about packet size. Worst case when processing a
|
|
* malformed packet we'll try to access the packet at ip header +
|
|
* 64 bytes which is still inside the skb. Even in the unlikely
|
|
* case where the checksum is right the higher layers will still
|
|
* drop the packet as appropriate.
|
|
*/
|
|
if (eh->h_proto != htons(ETH_P_IP))
|
|
return;
|
|
|
|
ih = (struct iphdr *) ((char *)eh + ETH_HLEN);
|
|
if (ih->frag_off & htons(IP_MF | IP_OFFSET))
|
|
return;
|
|
|
|
proto = ih->protocol;
|
|
if (proto != IPPROTO_TCP && proto != IPPROTO_UDP)
|
|
return;
|
|
|
|
/* Same as tx - compute csum of pseudo header */
|
|
csum = hwsum +
|
|
(ih->tot_len - (ih->ihl << 2)) +
|
|
htons((uint16_t)ih->protocol) +
|
|
(ih->saddr >> 16) + (ih->saddr & 0xffff) +
|
|
(ih->daddr >> 16) + (ih->daddr & 0xffff);
|
|
|
|
/* Sum up ethernet dest addr, src addr and protocol */
|
|
ew = (uint16_t *) eh;
|
|
ehsum = ew[0] + ew[1] + ew[2] + ew[3] + ew[4] + ew[5] + ew[6];
|
|
|
|
ehsum = (ehsum & 0xffff) + (ehsum >> 16);
|
|
ehsum = (ehsum & 0xffff) + (ehsum >> 16);
|
|
|
|
csum += 0xffff ^ ehsum;
|
|
|
|
/* In the next step we also subtract the 1's complement
|
|
checksum of the trailing ethernet CRC. */
|
|
cp = (char *)eh + len; /* points at trailing CRC */
|
|
if (len & 1) {
|
|
csum += 0xffff ^ (uint16_t) ((cp[1] << 8) | cp[0]);
|
|
csum += 0xffff ^ (uint16_t) ((cp[3] << 8) | cp[2]);
|
|
} else {
|
|
csum += 0xffff ^ (uint16_t) ((cp[0] << 8) | cp[1]);
|
|
csum += 0xffff ^ (uint16_t) ((cp[2] << 8) | cp[3]);
|
|
}
|
|
|
|
csum = (csum & 0xffff) + (csum >> 16);
|
|
csum = (csum & 0xffff) + (csum >> 16);
|
|
|
|
if (csum == 0xffff)
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
}
|
|
|
|
static inline void ioc3_rx(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct sk_buff *skb, *new_skb;
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
int rx_entry, n_entry, len;
|
|
struct ioc3_erxbuf *rxb;
|
|
unsigned long *rxr;
|
|
u32 w0, err;
|
|
|
|
rxr = (unsigned long *) ip->rxr; /* Ring base */
|
|
rx_entry = ip->rx_ci; /* RX consume index */
|
|
n_entry = ip->rx_pi;
|
|
|
|
skb = ip->rx_skbs[rx_entry];
|
|
rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
|
|
w0 = be32_to_cpu(rxb->w0);
|
|
|
|
while (w0 & ERXBUF_V) {
|
|
err = be32_to_cpu(rxb->err); /* It's valid ... */
|
|
if (err & ERXBUF_GOODPKT) {
|
|
len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4;
|
|
skb_trim(skb, len);
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
|
|
if (!new_skb) {
|
|
/* Ouch, drop packet and just recycle packet
|
|
to keep the ring filled. */
|
|
dev->stats.rx_dropped++;
|
|
new_skb = skb;
|
|
goto next;
|
|
}
|
|
|
|
if (likely(ip->flags & IOC3_FLAG_RX_CHECKSUMS))
|
|
ioc3_tcpudp_checksum(skb,
|
|
w0 & ERXBUF_IPCKSUM_MASK, len);
|
|
|
|
netif_rx(skb);
|
|
|
|
ip->rx_skbs[rx_entry] = NULL; /* Poison */
|
|
|
|
/* Because we reserve afterwards. */
|
|
skb_put(new_skb, (1664 + RX_OFFSET));
|
|
rxb = (struct ioc3_erxbuf *) new_skb->data;
|
|
skb_reserve(new_skb, RX_OFFSET);
|
|
|
|
dev->stats.rx_packets++; /* Statistics */
|
|
dev->stats.rx_bytes += len;
|
|
} else {
|
|
/* The frame is invalid and the skb never
|
|
reached the network layer so we can just
|
|
recycle it. */
|
|
new_skb = skb;
|
|
dev->stats.rx_errors++;
|
|
}
|
|
if (err & ERXBUF_CRCERR) /* Statistics */
|
|
dev->stats.rx_crc_errors++;
|
|
if (err & ERXBUF_FRAMERR)
|
|
dev->stats.rx_frame_errors++;
|
|
next:
|
|
ip->rx_skbs[n_entry] = new_skb;
|
|
rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1));
|
|
rxb->w0 = 0; /* Clear valid flag */
|
|
n_entry = (n_entry + 1) & 511; /* Update erpir */
|
|
|
|
/* Now go on to the next ring entry. */
|
|
rx_entry = (rx_entry + 1) & 511;
|
|
skb = ip->rx_skbs[rx_entry];
|
|
rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
|
|
w0 = be32_to_cpu(rxb->w0);
|
|
}
|
|
ioc3_w_erpir((n_entry << 3) | ERPIR_ARM);
|
|
ip->rx_pi = n_entry;
|
|
ip->rx_ci = rx_entry;
|
|
}
|
|
|
|
static inline void ioc3_tx(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
unsigned long packets, bytes;
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
int tx_entry, o_entry;
|
|
struct sk_buff *skb;
|
|
u32 etcir;
|
|
|
|
spin_lock(&ip->ioc3_lock);
|
|
etcir = ioc3_r_etcir();
|
|
|
|
tx_entry = (etcir >> 7) & 127;
|
|
o_entry = ip->tx_ci;
|
|
packets = 0;
|
|
bytes = 0;
|
|
|
|
while (o_entry != tx_entry) {
|
|
packets++;
|
|
skb = ip->tx_skbs[o_entry];
|
|
bytes += skb->len;
|
|
dev_kfree_skb_irq(skb);
|
|
ip->tx_skbs[o_entry] = NULL;
|
|
|
|
o_entry = (o_entry + 1) & 127; /* Next */
|
|
|
|
etcir = ioc3_r_etcir(); /* More pkts sent? */
|
|
tx_entry = (etcir >> 7) & 127;
|
|
}
|
|
|
|
dev->stats.tx_packets += packets;
|
|
dev->stats.tx_bytes += bytes;
|
|
ip->txqlen -= packets;
|
|
|
|
if (ip->txqlen < 128)
|
|
netif_wake_queue(dev);
|
|
|
|
ip->tx_ci = o_entry;
|
|
spin_unlock(&ip->ioc3_lock);
|
|
}
|
|
|
|
/*
|
|
* Deal with fatal IOC3 errors. This condition might be caused by a hard or
|
|
* software problems, so we should try to recover
|
|
* more gracefully if this ever happens. In theory we might be flooded
|
|
* with such error interrupts if something really goes wrong, so we might
|
|
* also consider to take the interface down.
|
|
*/
|
|
static void ioc3_error(struct net_device *dev, u32 eisr)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
unsigned char *iface = dev->name;
|
|
|
|
spin_lock(&ip->ioc3_lock);
|
|
|
|
if (eisr & EISR_RXOFLO)
|
|
printk(KERN_ERR "%s: RX overflow.\n", iface);
|
|
if (eisr & EISR_RXBUFOFLO)
|
|
printk(KERN_ERR "%s: RX buffer overflow.\n", iface);
|
|
if (eisr & EISR_RXMEMERR)
|
|
printk(KERN_ERR "%s: RX PCI error.\n", iface);
|
|
if (eisr & EISR_RXPARERR)
|
|
printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface);
|
|
if (eisr & EISR_TXBUFUFLO)
|
|
printk(KERN_ERR "%s: TX buffer underflow.\n", iface);
|
|
if (eisr & EISR_TXMEMERR)
|
|
printk(KERN_ERR "%s: TX PCI error.\n", iface);
|
|
|
|
ioc3_stop(ip);
|
|
ioc3_init(dev);
|
|
ioc3_mii_init(ip);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock(&ip->ioc3_lock);
|
|
}
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t ioc3_interrupt(int irq, void *_dev)
|
|
{
|
|
struct net_device *dev = (struct net_device *)_dev;
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
|
|
EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
|
|
EISR_TXEXPLICIT | EISR_TXMEMERR;
|
|
u32 eisr;
|
|
|
|
eisr = ioc3_r_eisr() & enabled;
|
|
|
|
ioc3_w_eisr(eisr);
|
|
(void) ioc3_r_eisr(); /* Flush */
|
|
|
|
if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR |
|
|
EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR))
|
|
ioc3_error(dev, eisr);
|
|
if (eisr & EISR_RXTIMERINT)
|
|
ioc3_rx(dev);
|
|
if (eisr & EISR_TXEXPLICIT)
|
|
ioc3_tx(dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void ioc3_setup_duplex(struct ioc3_private *ip)
|
|
{
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
if (ip->mii.full_duplex) {
|
|
ioc3_w_etcsr(ETCSR_FD);
|
|
ip->emcr |= EMCR_DUPLEX;
|
|
} else {
|
|
ioc3_w_etcsr(ETCSR_HD);
|
|
ip->emcr &= ~EMCR_DUPLEX;
|
|
}
|
|
ioc3_w_emcr(ip->emcr);
|
|
}
|
|
|
|
static void ioc3_timer(unsigned long data)
|
|
{
|
|
struct ioc3_private *ip = (struct ioc3_private *) data;
|
|
|
|
/* Print the link status if it has changed */
|
|
mii_check_media(&ip->mii, 1, 0);
|
|
ioc3_setup_duplex(ip);
|
|
|
|
ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */
|
|
add_timer(&ip->ioc3_timer);
|
|
}
|
|
|
|
/*
|
|
* Try to find a PHY. There is no apparent relation between the MII addresses
|
|
* in the SGI documentation and what we find in reality, so we simply probe
|
|
* for the PHY. It seems IOC3 PHYs usually live on address 31. One of my
|
|
* onboard IOC3s has the special oddity that probing doesn't seem to find it
|
|
* yet the interface seems to work fine, so if probing fails we for now will
|
|
* simply default to PHY 31 instead of bailing out.
|
|
*/
|
|
static int ioc3_mii_init(struct ioc3_private *ip)
|
|
{
|
|
struct net_device *dev = priv_netdev(ip);
|
|
int i, found = 0, res = 0;
|
|
int ioc3_phy_workaround = 1;
|
|
u16 word;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
word = ioc3_mdio_read(dev, i, MII_PHYSID1);
|
|
|
|
if (word != 0xffff && word != 0x0000) {
|
|
found = 1;
|
|
break; /* Found a PHY */
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
if (ioc3_phy_workaround)
|
|
i = 31;
|
|
else {
|
|
ip->mii.phy_id = -1;
|
|
res = -ENODEV;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
ip->mii.phy_id = i;
|
|
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static void ioc3_mii_start(struct ioc3_private *ip)
|
|
{
|
|
ip->ioc3_timer.expires = jiffies + (12 * HZ)/10; /* 1.2 sec. */
|
|
ip->ioc3_timer.data = (unsigned long) ip;
|
|
ip->ioc3_timer.function = ioc3_timer;
|
|
add_timer(&ip->ioc3_timer);
|
|
}
|
|
|
|
static inline void ioc3_clean_rx_ring(struct ioc3_private *ip)
|
|
{
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = ip->rx_ci; i & 15; i++) {
|
|
ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci];
|
|
ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++];
|
|
}
|
|
ip->rx_pi &= 511;
|
|
ip->rx_ci &= 511;
|
|
|
|
for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) {
|
|
struct ioc3_erxbuf *rxb;
|
|
skb = ip->rx_skbs[i];
|
|
rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
|
|
rxb->w0 = 0;
|
|
}
|
|
}
|
|
|
|
static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
|
|
{
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i=0; i < 128; i++) {
|
|
skb = ip->tx_skbs[i];
|
|
if (skb) {
|
|
ip->tx_skbs[i] = NULL;
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
ip->txr[i].cmd = 0;
|
|
}
|
|
ip->tx_pi = 0;
|
|
ip->tx_ci = 0;
|
|
}
|
|
|
|
static void ioc3_free_rings(struct ioc3_private *ip)
|
|
{
|
|
struct sk_buff *skb;
|
|
int rx_entry, n_entry;
|
|
|
|
if (ip->txr) {
|
|
ioc3_clean_tx_ring(ip);
|
|
free_pages((unsigned long)ip->txr, 2);
|
|
ip->txr = NULL;
|
|
}
|
|
|
|
if (ip->rxr) {
|
|
n_entry = ip->rx_ci;
|
|
rx_entry = ip->rx_pi;
|
|
|
|
while (n_entry != rx_entry) {
|
|
skb = ip->rx_skbs[n_entry];
|
|
if (skb)
|
|
dev_kfree_skb_any(skb);
|
|
|
|
n_entry = (n_entry + 1) & 511;
|
|
}
|
|
free_page((unsigned long)ip->rxr);
|
|
ip->rxr = NULL;
|
|
}
|
|
}
|
|
|
|
static void ioc3_alloc_rings(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3_erxbuf *rxb;
|
|
unsigned long *rxr;
|
|
int i;
|
|
|
|
if (ip->rxr == NULL) {
|
|
/* Allocate and initialize rx ring. 4kb = 512 entries */
|
|
ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC);
|
|
rxr = (unsigned long *) ip->rxr;
|
|
if (!rxr)
|
|
printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n");
|
|
|
|
/* Now the rx buffers. The RX ring may be larger but
|
|
we only allocate 16 buffers for now. Need to tune
|
|
this for performance and memory later. */
|
|
for (i = 0; i < RX_BUFFS; i++) {
|
|
struct sk_buff *skb;
|
|
|
|
skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
|
|
if (!skb) {
|
|
show_free_areas();
|
|
continue;
|
|
}
|
|
|
|
ip->rx_skbs[i] = skb;
|
|
|
|
/* Because we reserve afterwards. */
|
|
skb_put(skb, (1664 + RX_OFFSET));
|
|
rxb = (struct ioc3_erxbuf *) skb->data;
|
|
rxr[i] = cpu_to_be64(ioc3_map(rxb, 1));
|
|
skb_reserve(skb, RX_OFFSET);
|
|
}
|
|
ip->rx_ci = 0;
|
|
ip->rx_pi = RX_BUFFS;
|
|
}
|
|
|
|
if (ip->txr == NULL) {
|
|
/* Allocate and initialize tx rings. 16kb = 128 bufs. */
|
|
ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2);
|
|
if (!ip->txr)
|
|
printk("ioc3_alloc_rings(): __get_free_pages() failed!\n");
|
|
ip->tx_pi = 0;
|
|
ip->tx_ci = 0;
|
|
}
|
|
}
|
|
|
|
static void ioc3_init_rings(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
unsigned long ring;
|
|
|
|
ioc3_free_rings(ip);
|
|
ioc3_alloc_rings(dev);
|
|
|
|
ioc3_clean_rx_ring(ip);
|
|
ioc3_clean_tx_ring(ip);
|
|
|
|
/* Now the rx ring base, consume & produce registers. */
|
|
ring = ioc3_map(ip->rxr, 0);
|
|
ioc3_w_erbr_h(ring >> 32);
|
|
ioc3_w_erbr_l(ring & 0xffffffff);
|
|
ioc3_w_ercir(ip->rx_ci << 3);
|
|
ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM);
|
|
|
|
ring = ioc3_map(ip->txr, 0);
|
|
|
|
ip->txqlen = 0; /* nothing queued */
|
|
|
|
/* Now the tx ring base, consume & produce registers. */
|
|
ioc3_w_etbr_h(ring >> 32);
|
|
ioc3_w_etbr_l(ring & 0xffffffff);
|
|
ioc3_w_etpir(ip->tx_pi << 7);
|
|
ioc3_w_etcir(ip->tx_ci << 7);
|
|
(void) ioc3_r_etcir(); /* Flush */
|
|
}
|
|
|
|
static inline void ioc3_ssram_disc(struct ioc3_private *ip)
|
|
{
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
volatile u32 *ssram0 = &ioc3->ssram[0x0000];
|
|
volatile u32 *ssram1 = &ioc3->ssram[0x4000];
|
|
unsigned int pattern = 0x5555;
|
|
|
|
/* Assume the larger size SSRAM and enable parity checking */
|
|
ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR));
|
|
|
|
*ssram0 = pattern;
|
|
*ssram1 = ~pattern & IOC3_SSRAM_DM;
|
|
|
|
if ((*ssram0 & IOC3_SSRAM_DM) != pattern ||
|
|
(*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) {
|
|
/* set ssram size to 64 KB */
|
|
ip->emcr = EMCR_RAMPAR;
|
|
ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ);
|
|
} else
|
|
ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR;
|
|
}
|
|
|
|
static void ioc3_init(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
del_timer_sync(&ip->ioc3_timer); /* Kill if running */
|
|
|
|
ioc3_w_emcr(EMCR_RST); /* Reset */
|
|
(void) ioc3_r_emcr(); /* Flush WB */
|
|
udelay(4); /* Give it time ... */
|
|
ioc3_w_emcr(0);
|
|
(void) ioc3_r_emcr();
|
|
|
|
/* Misc registers */
|
|
#ifdef CONFIG_SGI_IP27
|
|
ioc3_w_erbar(PCI64_ATTR_BAR >> 32); /* Barrier on last store */
|
|
#else
|
|
ioc3_w_erbar(0); /* Let PCI API get it right */
|
|
#endif
|
|
(void) ioc3_r_etcdc(); /* Clear on read */
|
|
ioc3_w_ercsr(15); /* RX low watermark */
|
|
ioc3_w_ertr(0); /* Interrupt immediately */
|
|
__ioc3_set_mac_address(dev);
|
|
ioc3_w_ehar_h(ip->ehar_h);
|
|
ioc3_w_ehar_l(ip->ehar_l);
|
|
ioc3_w_ersr(42); /* XXX should be random */
|
|
|
|
ioc3_init_rings(dev);
|
|
|
|
ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN |
|
|
EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN;
|
|
ioc3_w_emcr(ip->emcr);
|
|
ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
|
|
EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
|
|
EISR_TXEXPLICIT | EISR_TXMEMERR);
|
|
(void) ioc3_r_eier();
|
|
}
|
|
|
|
static inline void ioc3_stop(struct ioc3_private *ip)
|
|
{
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
ioc3_w_emcr(0); /* Shutup */
|
|
ioc3_w_eier(0); /* Disable interrupts */
|
|
(void) ioc3_r_eier(); /* Flush */
|
|
}
|
|
|
|
static int ioc3_open(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
|
|
printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
ip->ehar_h = 0;
|
|
ip->ehar_l = 0;
|
|
ioc3_init(dev);
|
|
ioc3_mii_start(ip);
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int ioc3_close(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
del_timer_sync(&ip->ioc3_timer);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
ioc3_stop(ip);
|
|
free_irq(dev->irq, dev);
|
|
|
|
ioc3_free_rings(ip);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* MENET cards have four IOC3 chips, which are attached to two sets of
|
|
* PCI slot resources each: the primary connections are on slots
|
|
* 0..3 and the secondaries are on 4..7
|
|
*
|
|
* All four ethernets are brought out to connectors; six serial ports
|
|
* (a pair from each of the first three IOC3s) are brought out to
|
|
* MiniDINs; all other subdevices are left swinging in the wind, leave
|
|
* them disabled.
|
|
*/
|
|
|
|
static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
|
|
{
|
|
struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
|
|
int ret = 0;
|
|
|
|
if (dev) {
|
|
if (dev->vendor == PCI_VENDOR_ID_SGI &&
|
|
dev->device == PCI_DEVICE_ID_SGI_IOC3)
|
|
ret = 1;
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ioc3_is_menet(struct pci_dev *pdev)
|
|
{
|
|
return pdev->bus->parent == NULL &&
|
|
ioc3_adjacent_is_ioc3(pdev, 0) &&
|
|
ioc3_adjacent_is_ioc3(pdev, 1) &&
|
|
ioc3_adjacent_is_ioc3(pdev, 2);
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
/*
|
|
* Note about serial ports and consoles:
|
|
* For console output, everyone uses the IOC3 UARTA (offset 0x178)
|
|
* connected to the master node (look in ip27_setup_console() and
|
|
* ip27prom_console_write()).
|
|
*
|
|
* For serial (/dev/ttyS0 etc), we can not have hardcoded serial port
|
|
* addresses on a partitioned machine. Since we currently use the ioc3
|
|
* serial ports, we use dynamic serial port discovery that the serial.c
|
|
* driver uses for pci/pnp ports (there is an entry for the SGI ioc3
|
|
* boards in pci_boards[]). Unfortunately, UARTA's pio address is greater
|
|
* than UARTB's, although UARTA on o200s has traditionally been known as
|
|
* port 0. So, we just use one serial port from each ioc3 (since the
|
|
* serial driver adds addresses to get to higher ports).
|
|
*
|
|
* The first one to do a register_console becomes the preferred console
|
|
* (if there is no kernel command line console= directive). /dev/console
|
|
* (ie 5, 1) is then "aliased" into the device number returned by the
|
|
* "device" routine referred to in this console structure
|
|
* (ip27prom_console_dev).
|
|
*
|
|
* Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working
|
|
* around ioc3 oddities in this respect.
|
|
*
|
|
* The IOC3 serials use a 22MHz clock rate with an additional divider which
|
|
* can be programmed in the SCR register if the DLAB bit is set.
|
|
*
|
|
* Register to interrupt zero because we share the interrupt with
|
|
* the serial driver which we don't properly support yet.
|
|
*
|
|
* Can't use UPF_IOREMAP as the whole of IOC3 resources have already been
|
|
* registered.
|
|
*/
|
|
static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
|
|
{
|
|
#define COSMISC_CONSTANT 6
|
|
|
|
struct uart_port port = {
|
|
.irq = 0,
|
|
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 0,
|
|
.uartclk = (22000000 << 1) / COSMISC_CONSTANT,
|
|
|
|
.membase = (unsigned char __iomem *) uart,
|
|
.mapbase = (unsigned long) uart,
|
|
};
|
|
unsigned char lcr;
|
|
|
|
lcr = uart->iu_lcr;
|
|
uart->iu_lcr = lcr | UART_LCR_DLAB;
|
|
uart->iu_scr = COSMISC_CONSTANT,
|
|
uart->iu_lcr = lcr;
|
|
uart->iu_lcr;
|
|
serial8250_register_port(&port);
|
|
}
|
|
|
|
static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
|
|
{
|
|
/*
|
|
* We need to recognice and treat the fourth MENET serial as it
|
|
* does not have an SuperIO chip attached to it, therefore attempting
|
|
* to access it will result in bus errors. We call something an
|
|
* MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
|
|
* in it. This is paranoid but we want to avoid blowing up on a
|
|
* showhorn PCI box that happens to have 4 IOC3 cards in it so it's
|
|
* not paranoid enough ...
|
|
*/
|
|
if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
|
|
return;
|
|
|
|
/*
|
|
* Switch IOC3 to PIO mode. It probably already was but let's be
|
|
* paranoid
|
|
*/
|
|
ioc3->gpcr_s = GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL;
|
|
ioc3->gpcr_s;
|
|
ioc3->gppr_6 = 0;
|
|
ioc3->gppr_6;
|
|
ioc3->gppr_7 = 0;
|
|
ioc3->gppr_7;
|
|
ioc3->sscr_a = ioc3->sscr_a & ~SSCR_DMA_EN;
|
|
ioc3->sscr_a;
|
|
ioc3->sscr_b = ioc3->sscr_b & ~SSCR_DMA_EN;
|
|
ioc3->sscr_b;
|
|
/* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */
|
|
ioc3->sio_iec &= ~ (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
|
|
SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
|
|
SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
|
|
SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
|
|
ioc3->sio_iec |= SIO_IR_SA_INT;
|
|
ioc3->sscr_a = 0;
|
|
ioc3->sio_iec &= ~ (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
|
|
SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
|
|
SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
|
|
SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
|
|
ioc3->sio_iec |= SIO_IR_SB_INT;
|
|
ioc3->sscr_b = 0;
|
|
|
|
ioc3_8250_register(&ioc3->sregs.uarta);
|
|
ioc3_8250_register(&ioc3->sregs.uartb);
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops ioc3_netdev_ops = {
|
|
.ndo_open = ioc3_open,
|
|
.ndo_stop = ioc3_close,
|
|
.ndo_start_xmit = ioc3_start_xmit,
|
|
.ndo_tx_timeout = ioc3_timeout,
|
|
.ndo_get_stats = ioc3_get_stats,
|
|
.ndo_set_multicast_list = ioc3_set_multicast_list,
|
|
.ndo_do_ioctl = ioc3_ioctl,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = ioc3_set_mac_address,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
};
|
|
|
|
static int __devinit ioc3_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
unsigned int sw_physid1, sw_physid2;
|
|
struct net_device *dev = NULL;
|
|
struct ioc3_private *ip;
|
|
struct ioc3 *ioc3;
|
|
unsigned long ioc3_base, ioc3_size;
|
|
u32 vendor, model, rev;
|
|
int err, pci_using_dac;
|
|
|
|
/* Configure DMA attributes. */
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (!err) {
|
|
pci_using_dac = 1;
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (err < 0) {
|
|
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
|
|
"for consistent allocations\n", pci_name(pdev));
|
|
goto out;
|
|
}
|
|
} else {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
printk(KERN_ERR "%s: No usable DMA configuration, "
|
|
"aborting.\n", pci_name(pdev));
|
|
goto out;
|
|
}
|
|
pci_using_dac = 0;
|
|
}
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -ENODEV;
|
|
|
|
dev = alloc_etherdev(sizeof(struct ioc3_private));
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto out_disable;
|
|
}
|
|
|
|
if (pci_using_dac)
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
|
|
err = pci_request_regions(pdev, "ioc3");
|
|
if (err)
|
|
goto out_free;
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
ip = netdev_priv(dev);
|
|
|
|
dev->irq = pdev->irq;
|
|
|
|
ioc3_base = pci_resource_start(pdev, 0);
|
|
ioc3_size = pci_resource_len(pdev, 0);
|
|
ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size);
|
|
if (!ioc3) {
|
|
printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n",
|
|
pci_name(pdev));
|
|
err = -ENOMEM;
|
|
goto out_res;
|
|
}
|
|
ip->regs = ioc3;
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
ioc3_serial_probe(pdev, ioc3);
|
|
#endif
|
|
|
|
spin_lock_init(&ip->ioc3_lock);
|
|
init_timer(&ip->ioc3_timer);
|
|
|
|
ioc3_stop(ip);
|
|
ioc3_init(dev);
|
|
|
|
ip->pdev = pdev;
|
|
|
|
ip->mii.phy_id_mask = 0x1f;
|
|
ip->mii.reg_num_mask = 0x1f;
|
|
ip->mii.dev = dev;
|
|
ip->mii.mdio_read = ioc3_mdio_read;
|
|
ip->mii.mdio_write = ioc3_mdio_write;
|
|
|
|
ioc3_mii_init(ip);
|
|
|
|
if (ip->mii.phy_id == -1) {
|
|
printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
|
|
pci_name(pdev));
|
|
err = -ENODEV;
|
|
goto out_stop;
|
|
}
|
|
|
|
ioc3_mii_start(ip);
|
|
ioc3_ssram_disc(ip);
|
|
ioc3_get_eaddr(ip);
|
|
|
|
/* The IOC3-specific entries in the device structure. */
|
|
dev->watchdog_timeo = 5 * HZ;
|
|
dev->netdev_ops = &ioc3_netdev_ops;
|
|
dev->ethtool_ops = &ioc3_ethtool_ops;
|
|
dev->features = NETIF_F_IP_CSUM;
|
|
|
|
sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
|
|
sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out_stop;
|
|
|
|
mii_check_media(&ip->mii, 1, 1);
|
|
ioc3_setup_duplex(ip);
|
|
|
|
vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
|
|
model = (sw_physid2 >> 4) & 0x3f;
|
|
rev = sw_physid2 & 0xf;
|
|
printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, "
|
|
"rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev);
|
|
printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name,
|
|
ip->emcr & EMCR_BUFSIZ ? 128 : 64);
|
|
|
|
return 0;
|
|
|
|
out_stop:
|
|
ioc3_stop(ip);
|
|
del_timer_sync(&ip->ioc3_timer);
|
|
ioc3_free_rings(ip);
|
|
out_res:
|
|
pci_release_regions(pdev);
|
|
out_free:
|
|
free_netdev(dev);
|
|
out_disable:
|
|
/*
|
|
* We should call pci_disable_device(pdev); here if the IOC3 wasn't
|
|
* such a weird device ...
|
|
*/
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit ioc3_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
|
|
unregister_netdev(dev);
|
|
del_timer_sync(&ip->ioc3_timer);
|
|
|
|
iounmap(ioc3);
|
|
pci_release_regions(pdev);
|
|
free_netdev(dev);
|
|
/*
|
|
* We should call pci_disable_device(pdev); here if the IOC3 wasn't
|
|
* such a weird device ...
|
|
*/
|
|
}
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(ioc3_pci_tbl) = {
|
|
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl);
|
|
|
|
static struct pci_driver ioc3_driver = {
|
|
.name = "ioc3-eth",
|
|
.id_table = ioc3_pci_tbl,
|
|
.probe = ioc3_probe,
|
|
.remove = __devexit_p(ioc3_remove_one),
|
|
};
|
|
|
|
static int __init ioc3_init_module(void)
|
|
{
|
|
return pci_register_driver(&ioc3_driver);
|
|
}
|
|
|
|
static void __exit ioc3_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&ioc3_driver);
|
|
}
|
|
|
|
static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
unsigned long data;
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
unsigned int len;
|
|
struct ioc3_etxd *desc;
|
|
uint32_t w0 = 0;
|
|
int produce;
|
|
|
|
/*
|
|
* IOC3 has a fairly simple minded checksumming hardware which simply
|
|
* adds up the 1's complement checksum for the entire packet and
|
|
* inserts it at an offset which can be specified in the descriptor
|
|
* into the transmit packet. This means we have to compensate for the
|
|
* MAC header which should not be summed and the TCP/UDP pseudo headers
|
|
* manually.
|
|
*/
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
const struct iphdr *ih = ip_hdr(skb);
|
|
const int proto = ntohs(ih->protocol);
|
|
unsigned int csoff;
|
|
uint32_t csum, ehsum;
|
|
uint16_t *eh;
|
|
|
|
/* The MAC header. skb->mac seem the logic approach
|
|
to find the MAC header - except it's a NULL pointer ... */
|
|
eh = (uint16_t *) skb->data;
|
|
|
|
/* Sum up dest addr, src addr and protocol */
|
|
ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6];
|
|
|
|
/* Fold ehsum. can't use csum_fold which negates also ... */
|
|
ehsum = (ehsum & 0xffff) + (ehsum >> 16);
|
|
ehsum = (ehsum & 0xffff) + (ehsum >> 16);
|
|
|
|
/* Skip IP header; it's sum is always zero and was
|
|
already filled in by ip_output.c */
|
|
csum = csum_tcpudp_nofold(ih->saddr, ih->daddr,
|
|
ih->tot_len - (ih->ihl << 2),
|
|
proto, 0xffff ^ ehsum);
|
|
|
|
csum = (csum & 0xffff) + (csum >> 16); /* Fold again */
|
|
csum = (csum & 0xffff) + (csum >> 16);
|
|
|
|
csoff = ETH_HLEN + (ih->ihl << 2);
|
|
if (proto == IPPROTO_UDP) {
|
|
csoff += offsetof(struct udphdr, check);
|
|
udp_hdr(skb)->check = csum;
|
|
}
|
|
if (proto == IPPROTO_TCP) {
|
|
csoff += offsetof(struct tcphdr, check);
|
|
tcp_hdr(skb)->check = csum;
|
|
}
|
|
|
|
w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT);
|
|
}
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
|
|
data = (unsigned long) skb->data;
|
|
len = skb->len;
|
|
|
|
produce = ip->tx_pi;
|
|
desc = &ip->txr[produce];
|
|
|
|
if (len <= 104) {
|
|
/* Short packet, let's copy it directly into the ring. */
|
|
skb_copy_from_linear_data(skb, desc->data, skb->len);
|
|
if (len < ETH_ZLEN) {
|
|
/* Very short packet, pad with zeros at the end. */
|
|
memset(desc->data + len, 0, ETH_ZLEN - len);
|
|
len = ETH_ZLEN;
|
|
}
|
|
desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0);
|
|
desc->bufcnt = cpu_to_be32(len);
|
|
} else if ((data ^ (data + len - 1)) & 0x4000) {
|
|
unsigned long b2 = (data | 0x3fffUL) + 1UL;
|
|
unsigned long s1 = b2 - data;
|
|
unsigned long s2 = data + len - b2;
|
|
|
|
desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE |
|
|
ETXD_B1V | ETXD_B2V | w0);
|
|
desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) |
|
|
(s2 << ETXD_B2CNT_SHIFT));
|
|
desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
|
|
desc->p2 = cpu_to_be64(ioc3_map((void *) b2, 1));
|
|
} else {
|
|
/* Normal sized packet that doesn't cross a page boundary. */
|
|
desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0);
|
|
desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT);
|
|
desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
|
|
}
|
|
|
|
BARRIER();
|
|
|
|
ip->tx_skbs[produce] = skb; /* Remember skb */
|
|
produce = (produce + 1) & 127;
|
|
ip->tx_pi = produce;
|
|
ioc3_w_etpir(produce << 7); /* Fire ... */
|
|
|
|
ip->txqlen++;
|
|
|
|
if (ip->txqlen >= 127)
|
|
netif_stop_queue(dev);
|
|
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void ioc3_timeout(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
|
|
ioc3_stop(ip);
|
|
ioc3_init(dev);
|
|
ioc3_mii_init(ip);
|
|
ioc3_mii_start(ip);
|
|
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/*
|
|
* Given a multicast ethernet address, this routine calculates the
|
|
* address's bit index in the logical address filter mask
|
|
*/
|
|
|
|
static inline unsigned int ioc3_hash(const unsigned char *addr)
|
|
{
|
|
unsigned int temp = 0;
|
|
u32 crc;
|
|
int bits;
|
|
|
|
crc = ether_crc_le(ETH_ALEN, addr);
|
|
|
|
crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */
|
|
for (bits = 6; --bits >= 0; ) {
|
|
temp <<= 1;
|
|
temp |= (crc & 0x1);
|
|
crc >>= 1;
|
|
}
|
|
|
|
return temp;
|
|
}
|
|
|
|
static void ioc3_get_drvinfo (struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
strcpy (info->driver, IOC3_NAME);
|
|
strcpy (info->version, IOC3_VERSION);
|
|
strcpy (info->bus_info, pci_name(ip->pdev));
|
|
}
|
|
|
|
static int ioc3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
rc = mii_ethtool_gset(&ip->mii, cmd);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
rc = mii_ethtool_sset(&ip->mii, cmd);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ioc3_nway_reset(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
rc = mii_nway_restart(&ip->mii);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static u32 ioc3_get_link(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
rc = mii_link_ok(&ip->mii);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static u32 ioc3_get_rx_csum(struct net_device *dev)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
return ip->flags & IOC3_FLAG_RX_CHECKSUMS;
|
|
}
|
|
|
|
static int ioc3_set_rx_csum(struct net_device *dev, u32 data)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
|
|
spin_lock_bh(&ip->ioc3_lock);
|
|
if (data)
|
|
ip->flags |= IOC3_FLAG_RX_CHECKSUMS;
|
|
else
|
|
ip->flags &= ~IOC3_FLAG_RX_CHECKSUMS;
|
|
spin_unlock_bh(&ip->ioc3_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops ioc3_ethtool_ops = {
|
|
.get_drvinfo = ioc3_get_drvinfo,
|
|
.get_settings = ioc3_get_settings,
|
|
.set_settings = ioc3_set_settings,
|
|
.nway_reset = ioc3_nway_reset,
|
|
.get_link = ioc3_get_link,
|
|
.get_rx_csum = ioc3_get_rx_csum,
|
|
.set_rx_csum = ioc3_set_rx_csum,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
.set_tx_csum = ethtool_op_set_tx_csum
|
|
};
|
|
|
|
static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&ip->ioc3_lock);
|
|
rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL);
|
|
spin_unlock_irq(&ip->ioc3_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void ioc3_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
struct ioc3_private *ip = netdev_priv(dev);
|
|
struct ioc3 *ioc3 = ip->regs;
|
|
u64 ehar = 0;
|
|
|
|
netif_stop_queue(dev); /* Lock out others. */
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
ip->emcr |= EMCR_PROMISC;
|
|
ioc3_w_emcr(ip->emcr);
|
|
(void) ioc3_r_emcr();
|
|
} else {
|
|
ip->emcr &= ~EMCR_PROMISC;
|
|
ioc3_w_emcr(ip->emcr); /* Clear promiscuous. */
|
|
(void) ioc3_r_emcr();
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) ||
|
|
(netdev_mc_count(dev) > 64)) {
|
|
/* Too many for hashing to make sense or we want all
|
|
multicast packets anyway, so skip computing all the
|
|
hashes and just accept all packets. */
|
|
ip->ehar_h = 0xffffffff;
|
|
ip->ehar_l = 0xffffffff;
|
|
} else {
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
char *addr = ha->addr;
|
|
|
|
if (!(*addr & 1))
|
|
continue;
|
|
|
|
ehar |= (1UL << ioc3_hash(addr));
|
|
}
|
|
ip->ehar_h = ehar >> 32;
|
|
ip->ehar_l = ehar & 0xffffffff;
|
|
}
|
|
ioc3_w_ehar_h(ip->ehar_h);
|
|
ioc3_w_ehar_l(ip->ehar_l);
|
|
}
|
|
|
|
netif_wake_queue(dev); /* Let us get going again. */
|
|
}
|
|
|
|
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
|
|
MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(ioc3_init_module);
|
|
module_exit(ioc3_cleanup_module);
|