linux_dsm_epyc7002/drivers/net/wireless/ath/ath9k/ani.c
Felix Fietkau ae9c25a182 ath9k_hw: do not lower ANI setting below default on AR913x
When the amount of noise fluctuates strongly, low immunity settings
can sometimes disrupt signal detection on AR913x chips. When that
happens, no OFDM/CCK errors are reported anymore, and ANI tunes the
radio to the lowest immunity settings.
Usually rx/tx fails as well in that case.

To fix this, keep noise immunity settings at or above ANI default level,
which will keep radio parameters at or above INI values.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30 11:39:54 -04:00

521 lines
15 KiB
C

/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include "hw.h"
#include "hw-ops.h"
struct ani_ofdm_level_entry {
int spur_immunity_level;
int fir_step_level;
int ofdm_weak_signal_on;
};
/* values here are relative to the INI */
/*
* Legend:
*
* SI: Spur immunity
* FS: FIR Step
* WS: OFDM / CCK Weak Signal detection
* MRC-CCK: Maximal Ratio Combining for CCK
*/
static const struct ani_ofdm_level_entry ofdm_level_table[] = {
/* SI FS WS */
{ 0, 0, 1 }, /* lvl 0 */
{ 1, 1, 1 }, /* lvl 1 */
{ 2, 2, 1 }, /* lvl 2 */
{ 3, 2, 1 }, /* lvl 3 (default) */
{ 4, 3, 1 }, /* lvl 4 */
{ 5, 4, 1 }, /* lvl 5 */
{ 6, 5, 1 }, /* lvl 6 */
{ 7, 6, 1 }, /* lvl 7 */
{ 7, 7, 1 }, /* lvl 8 */
{ 7, 8, 0 } /* lvl 9 */
};
#define ATH9K_ANI_OFDM_NUM_LEVEL \
ARRAY_SIZE(ofdm_level_table)
#define ATH9K_ANI_OFDM_MAX_LEVEL \
(ATH9K_ANI_OFDM_NUM_LEVEL-1)
#define ATH9K_ANI_OFDM_DEF_LEVEL \
3 /* default level - matches the INI settings */
/*
* MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
* With OFDM for single stream you just add up all antenna inputs, you're
* only interested in what you get after FFT. Signal aligment is also not
* required for OFDM because any phase difference adds up in the frequency
* domain.
*
* MRC requires extra work for use with CCK. You need to align the antenna
* signals from the different antenna before you can add the signals together.
* You need aligment of signals as CCK is in time domain, so addition can cancel
* your signal completely if phase is 180 degrees (think of adding sine waves).
* You also need to remove noise before the addition and this is where ANI
* MRC CCK comes into play. One of the antenna inputs may be stronger but
* lower SNR, so just adding after alignment can be dangerous.
*
* Regardless of alignment in time, the antenna signals add constructively after
* FFT and improve your reception. For more information:
*
* http://en.wikipedia.org/wiki/Maximal-ratio_combining
*/
struct ani_cck_level_entry {
int fir_step_level;
int mrc_cck_on;
};
static const struct ani_cck_level_entry cck_level_table[] = {
/* FS MRC-CCK */
{ 0, 1 }, /* lvl 0 */
{ 1, 1 }, /* lvl 1 */
{ 2, 1 }, /* lvl 2 (default) */
{ 3, 1 }, /* lvl 3 */
{ 4, 0 }, /* lvl 4 */
{ 5, 0 }, /* lvl 5 */
{ 6, 0 }, /* lvl 6 */
{ 7, 0 }, /* lvl 7 (only for high rssi) */
{ 8, 0 } /* lvl 8 (only for high rssi) */
};
#define ATH9K_ANI_CCK_NUM_LEVEL \
ARRAY_SIZE(cck_level_table)
#define ATH9K_ANI_CCK_MAX_LEVEL \
(ATH9K_ANI_CCK_NUM_LEVEL-1)
#define ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI \
(ATH9K_ANI_CCK_NUM_LEVEL-3)
#define ATH9K_ANI_CCK_DEF_LEVEL \
2 /* default level - matches the INI settings */
static void ath9k_hw_update_mibstats(struct ath_hw *ah,
struct ath9k_mib_stats *stats)
{
stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
stats->rts_good += REG_READ(ah, AR_RTS_OK);
stats->beacons += REG_READ(ah, AR_BEACON_CNT);
}
static void ath9k_ani_restart(struct ath_hw *ah)
{
struct ar5416AniState *aniState;
if (!ah->curchan)
return;
aniState = &ah->ani;
aniState->listenTime = 0;
ENABLE_REGWRITE_BUFFER(ah);
REG_WRITE(ah, AR_PHY_ERR_1, 0);
REG_WRITE(ah, AR_PHY_ERR_2, 0);
REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
REGWRITE_BUFFER_FLUSH(ah);
ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
aniState->ofdmPhyErrCount = 0;
aniState->cckPhyErrCount = 0;
}
/* Adjust the OFDM Noise Immunity Level */
static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
bool scan)
{
struct ar5416AniState *aniState = &ah->ani;
struct ath_common *common = ath9k_hw_common(ah);
const struct ani_ofdm_level_entry *entry_ofdm;
const struct ani_cck_level_entry *entry_cck;
bool weak_sig;
ath_dbg(common, ANI, "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
aniState->ofdmNoiseImmunityLevel,
immunityLevel, BEACON_RSSI(ah),
ATH9K_ANI_RSSI_THR_LOW,
ATH9K_ANI_RSSI_THR_HIGH);
if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL)
immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL;
if (!scan)
aniState->ofdmNoiseImmunityLevel = immunityLevel;
entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
if (aniState->spurImmunityLevel != entry_ofdm->spur_immunity_level)
ath9k_hw_ani_control(ah,
ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
entry_ofdm->spur_immunity_level);
if (aniState->firstepLevel != entry_ofdm->fir_step_level &&
entry_ofdm->fir_step_level >= entry_cck->fir_step_level)
ath9k_hw_ani_control(ah,
ATH9K_ANI_FIRSTEP_LEVEL,
entry_ofdm->fir_step_level);
weak_sig = entry_ofdm->ofdm_weak_signal_on;
if (ah->opmode == NL80211_IFTYPE_STATION &&
BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
weak_sig = true;
/*
* Newer chipsets are better at dealing with high PHY error counts -
* keep weak signal detection enabled when no RSSI threshold is
* available to determine if it is needed (mode != STA)
*/
else if (AR_SREV_9300_20_OR_LATER(ah) &&
ah->opmode != NL80211_IFTYPE_STATION)
weak_sig = true;
/* Older chipsets are more sensitive to high PHY error counts */
else if (!AR_SREV_9300_20_OR_LATER(ah) &&
aniState->ofdmNoiseImmunityLevel >= 8)
weak_sig = false;
if (aniState->ofdmWeakSigDetect != weak_sig)
ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
weak_sig);
if (!AR_SREV_9300_20_OR_LATER(ah))
return;
if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
} else {
ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
}
}
static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
{
struct ar5416AniState *aniState;
if (!ah->curchan)
return;
aniState = &ah->ani;
if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false);
}
/*
* Set the ANI settings to match an CCK level.
*/
static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel,
bool scan)
{
struct ar5416AniState *aniState = &ah->ani;
struct ath_common *common = ath9k_hw_common(ah);
const struct ani_ofdm_level_entry *entry_ofdm;
const struct ani_cck_level_entry *entry_cck;
ath_dbg(common, ANI, "**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
aniState->cckNoiseImmunityLevel, immunityLevel,
BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW,
ATH9K_ANI_RSSI_THR_HIGH);
if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL)
immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL;
if (ah->opmode == NL80211_IFTYPE_STATION &&
BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW &&
immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI)
immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
if (!scan)
aniState->cckNoiseImmunityLevel = immunityLevel;
entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
if (aniState->firstepLevel != entry_cck->fir_step_level &&
entry_cck->fir_step_level >= entry_ofdm->fir_step_level)
ath9k_hw_ani_control(ah,
ATH9K_ANI_FIRSTEP_LEVEL,
entry_cck->fir_step_level);
/* Skip MRC CCK for pre AR9003 families */
if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
return;
if (aniState->mrcCCK != entry_cck->mrc_cck_on)
ath9k_hw_ani_control(ah,
ATH9K_ANI_MRC_CCK,
entry_cck->mrc_cck_on);
}
static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
{
struct ar5416AniState *aniState;
if (!ah->curchan)
return;
aniState = &ah->ani;
if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1,
false);
}
/*
* only lower either OFDM or CCK errors per turn
* we lower the other one next time
*/
static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
{
struct ar5416AniState *aniState;
aniState = &ah->ani;
/* lower OFDM noise immunity */
if (aniState->ofdmNoiseImmunityLevel > 0 &&
(aniState->ofdmsTurn || aniState->cckNoiseImmunityLevel == 0)) {
ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel - 1,
false);
return;
}
/* lower CCK noise immunity */
if (aniState->cckNoiseImmunityLevel > 0)
ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel - 1,
false);
}
/*
* Restore the ANI parameters in the HAL and reset the statistics.
* This routine should be called for every hardware reset and for
* every channel change.
*/
void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
{
struct ar5416AniState *aniState = &ah->ani;
struct ath9k_channel *chan = ah->curchan;
struct ath_common *common = ath9k_hw_common(ah);
int ofdm_nil, cck_nil;
if (!ah->curchan)
return;
BUG_ON(aniState == NULL);
ah->stats.ast_ani_reset++;
ofdm_nil = max_t(int, ATH9K_ANI_OFDM_DEF_LEVEL,
aniState->ofdmNoiseImmunityLevel);
cck_nil = max_t(int, ATH9K_ANI_CCK_DEF_LEVEL,
aniState->cckNoiseImmunityLevel);
if (is_scanning ||
(ah->opmode != NL80211_IFTYPE_STATION &&
ah->opmode != NL80211_IFTYPE_ADHOC)) {
/*
* If we're scanning or in AP mode, the defaults (ini)
* should be in place. For an AP we assume the historical
* levels for this channel are probably outdated so start
* from defaults instead.
*/
if (aniState->ofdmNoiseImmunityLevel !=
ATH9K_ANI_OFDM_DEF_LEVEL ||
aniState->cckNoiseImmunityLevel !=
ATH9K_ANI_CCK_DEF_LEVEL) {
ath_dbg(common, ANI,
"Restore defaults: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n",
ah->opmode,
chan->channel,
is_scanning,
aniState->ofdmNoiseImmunityLevel,
aniState->cckNoiseImmunityLevel);
ofdm_nil = ATH9K_ANI_OFDM_DEF_LEVEL;
cck_nil = ATH9K_ANI_CCK_DEF_LEVEL;
}
} else {
/*
* restore historical levels for this channel
*/
ath_dbg(common, ANI,
"Restore history: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n",
ah->opmode,
chan->channel,
is_scanning,
aniState->ofdmNoiseImmunityLevel,
aniState->cckNoiseImmunityLevel);
}
ath9k_hw_set_ofdm_nil(ah, ofdm_nil, is_scanning);
ath9k_hw_set_cck_nil(ah, cck_nil, is_scanning);
ath9k_ani_restart(ah);
}
static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ar5416AniState *aniState = &ah->ani;
u32 phyCnt1, phyCnt2;
int32_t listenTime;
ath_hw_cycle_counters_update(common);
listenTime = ath_hw_get_listen_time(common);
if (listenTime <= 0) {
ah->stats.ast_ani_lneg_or_lzero++;
ath9k_ani_restart(ah);
return false;
}
aniState->listenTime += listenTime;
ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
ah->stats.ast_ani_ofdmerrs += phyCnt1 - aniState->ofdmPhyErrCount;
aniState->ofdmPhyErrCount = phyCnt1;
ah->stats.ast_ani_cckerrs += phyCnt2 - aniState->cckPhyErrCount;
aniState->cckPhyErrCount = phyCnt2;
return true;
}
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
{
struct ar5416AniState *aniState;
struct ath_common *common = ath9k_hw_common(ah);
u32 ofdmPhyErrRate, cckPhyErrRate;
if (!ah->curchan)
return;
aniState = &ah->ani;
if (!ath9k_hw_ani_read_counters(ah))
return;
ofdmPhyErrRate = aniState->ofdmPhyErrCount * 1000 /
aniState->listenTime;
cckPhyErrRate = aniState->cckPhyErrCount * 1000 /
aniState->listenTime;
ath_dbg(common, ANI,
"listenTime=%d OFDM:%d errs=%d/s CCK:%d errs=%d/s ofdm_turn=%d\n",
aniState->listenTime,
aniState->ofdmNoiseImmunityLevel,
ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
cckPhyErrRate, aniState->ofdmsTurn);
if (aniState->listenTime > ah->aniperiod) {
if (cckPhyErrRate < ah->config.cck_trig_low &&
ofdmPhyErrRate < ah->config.ofdm_trig_low) {
ath9k_hw_ani_lower_immunity(ah);
aniState->ofdmsTurn = !aniState->ofdmsTurn;
} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
ath9k_hw_ani_ofdm_err_trigger(ah);
aniState->ofdmsTurn = false;
} else if (cckPhyErrRate > ah->config.cck_trig_high) {
ath9k_hw_ani_cck_err_trigger(ah);
aniState->ofdmsTurn = true;
}
ath9k_ani_restart(ah);
}
}
EXPORT_SYMBOL(ath9k_hw_ani_monitor);
void ath9k_enable_mib_counters(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
ath_dbg(common, ANI, "Enable MIB counters\n");
ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
ENABLE_REGWRITE_BUFFER(ah);
REG_WRITE(ah, AR_FILT_OFDM, 0);
REG_WRITE(ah, AR_FILT_CCK, 0);
REG_WRITE(ah, AR_MIBC,
~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS)
& 0x0f);
REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
REGWRITE_BUFFER_FLUSH(ah);
}
/* Freeze the MIB counters, get the stats and then clear them */
void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
ath_dbg(common, ANI, "Disable MIB counters\n");
REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC);
ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
REG_WRITE(ah, AR_MIBC, AR_MIBC_CMC);
REG_WRITE(ah, AR_FILT_OFDM, 0);
REG_WRITE(ah, AR_FILT_CCK, 0);
}
EXPORT_SYMBOL(ath9k_hw_disable_mib_counters);
void ath9k_hw_ani_init(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ar5416AniState *ani = &ah->ani;
ath_dbg(common, ANI, "Initialize ANI\n");
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
} else {
ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD;
ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD;
ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD;
ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD;
}
ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
ani->mrcCCK = AR_SREV_9300_20_OR_LATER(ah) ? true : false;
ani->ofdmsTurn = true;
ani->ofdmWeakSigDetect = true;
ani->cckNoiseImmunityLevel = ATH9K_ANI_CCK_DEF_LEVEL;
ani->ofdmNoiseImmunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL;
/*
* since we expect some ongoing maintenance on the tables, let's sanity
* check here default level should not modify INI setting.
*/
ah->aniperiod = ATH9K_ANI_PERIOD;
ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL;
ath9k_ani_restart(ah);
ath9k_enable_mib_counters(ah);
}