linux_dsm_epyc7002/drivers/regulator/lp8788-ldo.c
Kim, Milo ade7515fef regulator: add new lp8788 regulator driver
TI LP8788 PMU has 4 BUCKS and 22 LDOs.
The voltage of BUCK1 and BUCK2 can be controlled by external gpios.
And some LDOs also can be enabled by external gpios.
The regmap interface is used for regulator operations.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20 11:12:15 +01:00

843 lines
20 KiB
C

/*
* TI LP8788 MFD - ldo regulator driver
*
* Copyright 2012 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/gpio.h>
#include <linux/mfd/lp8788.h>
/* register address */
#define LP8788_EN_LDO_A 0x0D /* DLDO 1 ~ 8 */
#define LP8788_EN_LDO_B 0x0E /* DLDO 9 ~ 12, ALDO 1 ~ 4 */
#define LP8788_EN_LDO_C 0x0F /* ALDO 5 ~ 10 */
#define LP8788_EN_SEL 0x10
#define LP8788_DLDO1_VOUT 0x2E
#define LP8788_DLDO2_VOUT 0x2F
#define LP8788_DLDO3_VOUT 0x30
#define LP8788_DLDO4_VOUT 0x31
#define LP8788_DLDO5_VOUT 0x32
#define LP8788_DLDO6_VOUT 0x33
#define LP8788_DLDO7_VOUT 0x34
#define LP8788_DLDO8_VOUT 0x35
#define LP8788_DLDO9_VOUT 0x36
#define LP8788_DLDO10_VOUT 0x37
#define LP8788_DLDO11_VOUT 0x38
#define LP8788_DLDO12_VOUT 0x39
#define LP8788_ALDO1_VOUT 0x3A
#define LP8788_ALDO2_VOUT 0x3B
#define LP8788_ALDO3_VOUT 0x3C
#define LP8788_ALDO4_VOUT 0x3D
#define LP8788_ALDO5_VOUT 0x3E
#define LP8788_ALDO6_VOUT 0x3F
#define LP8788_ALDO7_VOUT 0x40
#define LP8788_ALDO8_VOUT 0x41
#define LP8788_ALDO9_VOUT 0x42
#define LP8788_ALDO10_VOUT 0x43
#define LP8788_DLDO1_TIMESTEP 0x44
/* mask/shift bits */
#define LP8788_EN_DLDO1_M BIT(0) /* Addr 0Dh ~ 0Fh */
#define LP8788_EN_DLDO2_M BIT(1)
#define LP8788_EN_DLDO3_M BIT(2)
#define LP8788_EN_DLDO4_M BIT(3)
#define LP8788_EN_DLDO5_M BIT(4)
#define LP8788_EN_DLDO6_M BIT(5)
#define LP8788_EN_DLDO7_M BIT(6)
#define LP8788_EN_DLDO8_M BIT(7)
#define LP8788_EN_DLDO9_M BIT(0)
#define LP8788_EN_DLDO10_M BIT(1)
#define LP8788_EN_DLDO11_M BIT(2)
#define LP8788_EN_DLDO12_M BIT(3)
#define LP8788_EN_ALDO1_M BIT(4)
#define LP8788_EN_ALDO2_M BIT(5)
#define LP8788_EN_ALDO3_M BIT(6)
#define LP8788_EN_ALDO4_M BIT(7)
#define LP8788_EN_ALDO5_M BIT(0)
#define LP8788_EN_ALDO6_M BIT(1)
#define LP8788_EN_ALDO7_M BIT(2)
#define LP8788_EN_ALDO8_M BIT(3)
#define LP8788_EN_ALDO9_M BIT(4)
#define LP8788_EN_ALDO10_M BIT(5)
#define LP8788_EN_SEL_DLDO911_M BIT(0) /* Addr 10h */
#define LP8788_EN_SEL_DLDO7_M BIT(1)
#define LP8788_EN_SEL_ALDO7_M BIT(2)
#define LP8788_EN_SEL_ALDO5_M BIT(3)
#define LP8788_EN_SEL_ALDO234_M BIT(4)
#define LP8788_EN_SEL_ALDO1_M BIT(5)
#define LP8788_VOUT_5BIT_M 0x1F /* Addr 2Eh ~ 43h */
#define LP8788_VOUT_4BIT_M 0x0F
#define LP8788_VOUT_3BIT_M 0x07
#define LP8788_VOUT_1BIT_M 0x01
#define LP8788_STARTUP_TIME_M 0xF8 /* Addr 44h ~ 59h */
#define LP8788_STARTUP_TIME_S 3
#define ENABLE_TIME_USEC 32
#define ENABLE GPIOF_OUT_INIT_HIGH
#define DISABLE GPIOF_OUT_INIT_LOW
enum lp8788_enable_mode {
REGISTER,
EXTPIN,
};
enum lp8788_ldo_id {
DLDO1,
DLDO2,
DLDO3,
DLDO4,
DLDO5,
DLDO6,
DLDO7,
DLDO8,
DLDO9,
DLDO10,
DLDO11,
DLDO12,
ALDO1,
ALDO2,
ALDO3,
ALDO4,
ALDO5,
ALDO6,
ALDO7,
ALDO8,
ALDO9,
ALDO10,
};
struct lp8788_ldo {
struct lp8788 *lp;
struct regulator_desc *desc;
struct regulator_dev *regulator;
struct lp8788_ldo_enable_pin *en_pin;
};
/* DLDO 1, 2, 3, 9 voltage table */
const int lp8788_dldo1239_vtbl[] = {
1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
};
/* DLDO 4 voltage table */
static const int lp8788_dldo4_vtbl[] = { 1800000, 3000000 };
/* DLDO 5, 7, 8 and ALDO 6 voltage table */
static const int lp8788_dldo578_aldo6_vtbl[] = {
1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
2600000, 2700000, 2800000, 2900000, 3000000, 3000000, 3000000, 3000000,
};
/* DLDO 6 voltage table */
static const int lp8788_dldo6_vtbl[] = {
3000000, 3100000, 3200000, 3300000, 3400000, 3500000, 3600000, 3600000,
};
/* DLDO 10, 11 voltage table */
static const int lp8788_dldo1011_vtbl[] = {
1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000,
1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000,
};
/* ALDO 1 voltage table */
static const int lp8788_aldo1_vtbl[] = { 1800000, 2850000 };
/* ALDO 7 voltage table */
static const int lp8788_aldo7_vtbl[] = {
1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
};
static enum lp8788_ldo_id lp8788_dldo_id[] = {
DLDO1,
DLDO2,
DLDO3,
DLDO4,
DLDO5,
DLDO6,
DLDO7,
DLDO8,
DLDO9,
DLDO10,
DLDO11,
DLDO12,
};
static enum lp8788_ldo_id lp8788_aldo_id[] = {
ALDO1,
ALDO2,
ALDO3,
ALDO4,
ALDO5,
ALDO6,
ALDO7,
ALDO8,
ALDO9,
ALDO10,
};
/* DLDO 7, 9 and 11, ALDO 1 ~ 5 and 7
: can be enabled either by external pin or by i2c register */
static enum lp8788_enable_mode
lp8788_get_ldo_enable_mode(struct lp8788_ldo *ldo, enum lp8788_ldo_id id)
{
int ret;
u8 val, mask;
ret = lp8788_read_byte(ldo->lp, LP8788_EN_SEL, &val);
if (ret)
return ret;
switch (id) {
case DLDO7:
mask = LP8788_EN_SEL_DLDO7_M;
break;
case DLDO9:
case DLDO11:
mask = LP8788_EN_SEL_DLDO911_M;
break;
case ALDO1:
mask = LP8788_EN_SEL_ALDO1_M;
break;
case ALDO2 ... ALDO4:
mask = LP8788_EN_SEL_ALDO234_M;
break;
case ALDO5:
mask = LP8788_EN_SEL_ALDO5_M;
break;
case ALDO7:
mask = LP8788_EN_SEL_ALDO7_M;
break;
default:
return REGISTER;
}
return val & mask ? EXTPIN : REGISTER;
}
static int lp8788_ldo_ctrl_by_extern_pin(struct lp8788_ldo *ldo, int pinstate)
{
struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
if (!pin)
return -EINVAL;
if (gpio_is_valid(pin->gpio))
gpio_set_value(pin->gpio, pinstate);
return 0;
}
static int lp8788_ldo_is_enabled_by_extern_pin(struct lp8788_ldo *ldo)
{
struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
if (!pin)
return -EINVAL;
return gpio_get_value(pin->gpio) ? 1 : 0;
}
static int lp8788_ldo_enable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
enum lp8788_ldo_id id = rdev_get_id(rdev);
enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
switch (mode) {
case EXTPIN:
return lp8788_ldo_ctrl_by_extern_pin(ldo, ENABLE);
case REGISTER:
return regulator_enable_regmap(rdev);
default:
return -EINVAL;
}
}
static int lp8788_ldo_disable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
enum lp8788_ldo_id id = rdev_get_id(rdev);
enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
switch (mode) {
case EXTPIN:
return lp8788_ldo_ctrl_by_extern_pin(ldo, DISABLE);
case REGISTER:
return regulator_disable_regmap(rdev);
default:
return -EINVAL;
}
}
static int lp8788_ldo_is_enabled(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
enum lp8788_ldo_id id = rdev_get_id(rdev);
enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
switch (mode) {
case EXTPIN:
return lp8788_ldo_is_enabled_by_extern_pin(ldo);
case REGISTER:
return regulator_is_enabled_regmap(rdev);
default:
return -EINVAL;
}
}
static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
enum lp8788_ldo_id id = rdev_get_id(rdev);
u8 val, addr = LP8788_DLDO1_TIMESTEP + id;
if (lp8788_read_byte(ldo->lp, addr, &val))
return -EINVAL;
val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
return ENABLE_TIME_USEC * val;
}
static int lp8788_ldo_fixed_get_voltage(struct regulator_dev *rdev)
{
enum lp8788_ldo_id id = rdev_get_id(rdev);
switch (id) {
case ALDO2 ... ALDO5:
return 2850000;
case DLDO12:
case ALDO8 ... ALDO9:
return 2500000;
case ALDO10:
return 1100000;
default:
return -EINVAL;
}
}
static struct regulator_ops lp8788_ldo_voltage_table_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = lp8788_ldo_enable,
.disable = lp8788_ldo_disable,
.is_enabled = lp8788_ldo_is_enabled,
.enable_time = lp8788_ldo_enable_time,
};
static struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
.get_voltage = lp8788_ldo_fixed_get_voltage,
.enable = lp8788_ldo_enable,
.disable = lp8788_ldo_disable,
.is_enabled = lp8788_ldo_is_enabled,
.enable_time = lp8788_ldo_enable_time,
};
static struct regulator_desc lp8788_dldo_desc[] = {
{
.name = "dldo1",
.id = DLDO1,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
.volt_table = lp8788_dldo1239_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO1_VOUT,
.vsel_mask = LP8788_VOUT_5BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO1_M,
},
{
.name = "dldo2",
.id = DLDO2,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
.volt_table = lp8788_dldo1239_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO2_VOUT,
.vsel_mask = LP8788_VOUT_5BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO2_M,
},
{
.name = "dldo3",
.id = DLDO3,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
.volt_table = lp8788_dldo1239_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO3_VOUT,
.vsel_mask = LP8788_VOUT_5BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO3_M,
},
{
.name = "dldo4",
.id = DLDO4,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo4_vtbl),
.volt_table = lp8788_dldo4_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO4_VOUT,
.vsel_mask = LP8788_VOUT_1BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO4_M,
},
{
.name = "dldo5",
.id = DLDO5,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
.volt_table = lp8788_dldo578_aldo6_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO5_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO5_M,
},
{
.name = "dldo6",
.id = DLDO6,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo6_vtbl),
.volt_table = lp8788_dldo6_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO6_VOUT,
.vsel_mask = LP8788_VOUT_3BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO6_M,
},
{
.name = "dldo7",
.id = DLDO7,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
.volt_table = lp8788_dldo578_aldo6_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO7_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO7_M,
},
{
.name = "dldo8",
.id = DLDO8,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
.volt_table = lp8788_dldo578_aldo6_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO8_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_A,
.enable_mask = LP8788_EN_DLDO8_M,
},
{
.name = "dldo9",
.id = DLDO9,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
.volt_table = lp8788_dldo1239_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO9_VOUT,
.vsel_mask = LP8788_VOUT_5BIT_M,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_DLDO9_M,
},
{
.name = "dldo10",
.id = DLDO10,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
.volt_table = lp8788_dldo1011_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO10_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_DLDO10_M,
},
{
.name = "dldo11",
.id = DLDO11,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
.volt_table = lp8788_dldo1011_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_DLDO11_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_DLDO11_M,
},
{
.name = "dldo12",
.id = DLDO12,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_DLDO12_M,
},
};
static struct regulator_desc lp8788_aldo_desc[] = {
{
.name = "aldo1",
.id = ALDO1,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_aldo1_vtbl),
.volt_table = lp8788_aldo1_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_ALDO1_VOUT,
.vsel_mask = LP8788_VOUT_1BIT_M,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_ALDO1_M,
},
{
.name = "aldo2",
.id = ALDO2,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_ALDO2_M,
},
{
.name = "aldo3",
.id = ALDO3,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_ALDO3_M,
},
{
.name = "aldo4",
.id = ALDO4,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_B,
.enable_mask = LP8788_EN_ALDO4_M,
},
{
.name = "aldo5",
.id = ALDO5,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO5_M,
},
{
.name = "aldo6",
.id = ALDO6,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
.volt_table = lp8788_dldo578_aldo6_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_ALDO6_VOUT,
.vsel_mask = LP8788_VOUT_4BIT_M,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO6_M,
},
{
.name = "aldo7",
.id = ALDO7,
.ops = &lp8788_ldo_voltage_table_ops,
.n_voltages = ARRAY_SIZE(lp8788_aldo7_vtbl),
.volt_table = lp8788_aldo7_vtbl,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_ALDO7_VOUT,
.vsel_mask = LP8788_VOUT_3BIT_M,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO7_M,
},
{
.name = "aldo8",
.id = ALDO8,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO8_M,
},
{
.name = "aldo9",
.id = ALDO9,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO9_M,
},
{
.name = "aldo10",
.id = ALDO10,
.ops = &lp8788_ldo_voltage_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_LDO_C,
.enable_mask = LP8788_EN_ALDO10_M,
},
};
static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo,
enum lp8788_ext_ldo_en_id id)
{
struct device *dev = ldo->lp->dev;
struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
int ret, gpio, pinstate;
char *name[] = {
[EN_ALDO1] = "LP8788_EN_ALDO1",
[EN_ALDO234] = "LP8788_EN_ALDO234",
[EN_ALDO5] = "LP8788_EN_ALDO5",
[EN_ALDO7] = "LP8788_EN_ALDO7",
[EN_DLDO7] = "LP8788_EN_DLDO7",
[EN_DLDO911] = "LP8788_EN_DLDO911",
};
gpio = pin->gpio;
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio: %d\n", gpio);
return -EINVAL;
}
pinstate = pin->init_state;
ret = devm_gpio_request_one(dev, gpio, pinstate, name[id]);
if (ret == -EBUSY) {
dev_warn(dev, "gpio%d already used\n", gpio);
return 0;
}
return ret;
}
static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
enum lp8788_ldo_id id)
{
int ret;
struct lp8788 *lp = ldo->lp;
struct lp8788_platform_data *pdata = lp->pdata;
enum lp8788_ext_ldo_en_id enable_id;
u8 en_mask[] = {
[EN_ALDO1] = LP8788_EN_SEL_ALDO1_M,
[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
[EN_ALDO5] = LP8788_EN_SEL_ALDO5_M,
[EN_ALDO7] = LP8788_EN_SEL_ALDO7_M,
[EN_DLDO7] = LP8788_EN_SEL_DLDO7_M,
[EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
};
u8 val[] = {
[EN_ALDO1] = 0 << 5,
[EN_ALDO234] = 0 << 4,
[EN_ALDO5] = 0 << 3,
[EN_ALDO7] = 0 << 2,
[EN_DLDO7] = 0 << 1,
[EN_DLDO911] = 0 << 0,
};
switch (id) {
case DLDO7:
enable_id = EN_DLDO7;
break;
case DLDO9:
case DLDO11:
enable_id = EN_DLDO911;
break;
case ALDO1:
enable_id = EN_ALDO1;
break;
case ALDO2 ... ALDO4:
enable_id = EN_ALDO234;
break;
case ALDO5:
enable_id = EN_ALDO5;
break;
case ALDO7:
enable_id = EN_ALDO7;
break;
default:
return 0;
}
/* if no platform data for ldo pin, then set default enable mode */
if (!pdata || !pdata->ldo_pin || !pdata->ldo_pin[enable_id])
goto set_default_ldo_enable_mode;
ldo->en_pin = pdata->ldo_pin[enable_id];
ret = lp8788_gpio_request_ldo_en(ldo, enable_id);
if (ret)
goto set_default_ldo_enable_mode;
return ret;
set_default_ldo_enable_mode:
return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id],
val[enable_id]);
}
static __devinit int lp8788_dldo_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
int id = pdev->id;
struct lp8788_ldo *ldo;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int ret;
ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
ret = lp8788_config_ldo_enable_mode(ldo, lp8788_dldo_id[id]);
if (ret)
return ret;
cfg.dev = lp->dev;
cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
rdev = regulator_register(&lp8788_dldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(lp->dev, "DLDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
ldo->regulator = rdev;
platform_set_drvdata(pdev, ldo);
return 0;
}
static int __devexit lp8788_dldo_remove(struct platform_device *pdev)
{
struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
regulator_unregister(ldo->regulator);
return 0;
}
static struct platform_driver lp8788_dldo_driver = {
.probe = lp8788_dldo_probe,
.remove = __devexit_p(lp8788_dldo_remove),
.driver = {
.name = LP8788_DEV_DLDO,
.owner = THIS_MODULE,
},
};
static __devinit int lp8788_aldo_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
int id = pdev->id;
struct lp8788_ldo *ldo;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int ret;
ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
ret = lp8788_config_ldo_enable_mode(ldo, lp8788_aldo_id[id]);
if (ret)
return ret;
cfg.dev = lp->dev;
cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
rdev = regulator_register(&lp8788_aldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(lp->dev, "ALDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
ldo->regulator = rdev;
platform_set_drvdata(pdev, ldo);
return 0;
}
static int __devexit lp8788_aldo_remove(struct platform_device *pdev)
{
struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
regulator_unregister(ldo->regulator);
return 0;
}
static struct platform_driver lp8788_aldo_driver = {
.probe = lp8788_aldo_probe,
.remove = __devexit_p(lp8788_aldo_remove),
.driver = {
.name = LP8788_DEV_ALDO,
.owner = THIS_MODULE,
},
};
static int __init lp8788_ldo_init(void)
{
int ret;
ret = platform_driver_register(&lp8788_dldo_driver);
if (ret)
return ret;
return platform_driver_register(&lp8788_aldo_driver);
}
subsys_initcall(lp8788_ldo_init);
static void __exit lp8788_ldo_exit(void)
{
platform_driver_unregister(&lp8788_aldo_driver);
platform_driver_unregister(&lp8788_dldo_driver);
}
module_exit(lp8788_ldo_exit);
MODULE_DESCRIPTION("TI LP8788 LDO Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lp8788-dldo");
MODULE_ALIAS("platform:lp8788-aldo");