mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 00:47:11 +07:00
94d6671473
The current 300ms delay after a baudrate change is extremely long. For WCN3990 it is sufficient to wait 10ms after the baudrate change request has been sent over the wire. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
1522 lines
37 KiB
C
1522 lines
37 KiB
C
/*
|
|
* Bluetooth Software UART Qualcomm protocol
|
|
*
|
|
* HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
|
|
* protocol extension to H4.
|
|
*
|
|
* Copyright (C) 2007 Texas Instruments, Inc.
|
|
* Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
|
|
*
|
|
* Acknowledgements:
|
|
* This file is based on hci_ll.c, which was...
|
|
* Written by Ohad Ben-Cohen <ohad@bencohen.org>
|
|
* which was in turn based on hci_h4.c, which was written
|
|
* by Maxim Krasnyansky and Marcel Holtmann.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/serdev.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <net/bluetooth/bluetooth.h>
|
|
#include <net/bluetooth/hci_core.h>
|
|
|
|
#include "hci_uart.h"
|
|
#include "btqca.h"
|
|
|
|
/* HCI_IBS protocol messages */
|
|
#define HCI_IBS_SLEEP_IND 0xFE
|
|
#define HCI_IBS_WAKE_IND 0xFD
|
|
#define HCI_IBS_WAKE_ACK 0xFC
|
|
#define HCI_MAX_IBS_SIZE 10
|
|
|
|
/* Controller states */
|
|
#define STATE_IN_BAND_SLEEP_ENABLED 1
|
|
|
|
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
|
|
#define IBS_TX_IDLE_TIMEOUT_MS 2000
|
|
#define CMD_TRANS_TIMEOUT_MS 100
|
|
|
|
/* susclk rate */
|
|
#define SUSCLK_RATE_32KHZ 32768
|
|
|
|
/* Controller debug log header */
|
|
#define QCA_DEBUG_HANDLE 0x2EDC
|
|
|
|
/* HCI_IBS transmit side sleep protocol states */
|
|
enum tx_ibs_states {
|
|
HCI_IBS_TX_ASLEEP,
|
|
HCI_IBS_TX_WAKING,
|
|
HCI_IBS_TX_AWAKE,
|
|
};
|
|
|
|
/* HCI_IBS receive side sleep protocol states */
|
|
enum rx_states {
|
|
HCI_IBS_RX_ASLEEP,
|
|
HCI_IBS_RX_AWAKE,
|
|
};
|
|
|
|
/* HCI_IBS transmit and receive side clock state vote */
|
|
enum hci_ibs_clock_state_vote {
|
|
HCI_IBS_VOTE_STATS_UPDATE,
|
|
HCI_IBS_TX_VOTE_CLOCK_ON,
|
|
HCI_IBS_TX_VOTE_CLOCK_OFF,
|
|
HCI_IBS_RX_VOTE_CLOCK_ON,
|
|
HCI_IBS_RX_VOTE_CLOCK_OFF,
|
|
};
|
|
|
|
struct qca_data {
|
|
struct hci_uart *hu;
|
|
struct sk_buff *rx_skb;
|
|
struct sk_buff_head txq;
|
|
struct sk_buff_head tx_wait_q; /* HCI_IBS wait queue */
|
|
spinlock_t hci_ibs_lock; /* HCI_IBS state lock */
|
|
u8 tx_ibs_state; /* HCI_IBS transmit side power state*/
|
|
u8 rx_ibs_state; /* HCI_IBS receive side power state */
|
|
bool tx_vote; /* Clock must be on for TX */
|
|
bool rx_vote; /* Clock must be on for RX */
|
|
struct timer_list tx_idle_timer;
|
|
u32 tx_idle_delay;
|
|
struct timer_list wake_retrans_timer;
|
|
u32 wake_retrans;
|
|
struct workqueue_struct *workqueue;
|
|
struct work_struct ws_awake_rx;
|
|
struct work_struct ws_awake_device;
|
|
struct work_struct ws_rx_vote_off;
|
|
struct work_struct ws_tx_vote_off;
|
|
unsigned long flags;
|
|
|
|
/* For debugging purpose */
|
|
u64 ibs_sent_wacks;
|
|
u64 ibs_sent_slps;
|
|
u64 ibs_sent_wakes;
|
|
u64 ibs_recv_wacks;
|
|
u64 ibs_recv_slps;
|
|
u64 ibs_recv_wakes;
|
|
u64 vote_last_jif;
|
|
u32 vote_on_ms;
|
|
u32 vote_off_ms;
|
|
u64 tx_votes_on;
|
|
u64 rx_votes_on;
|
|
u64 tx_votes_off;
|
|
u64 rx_votes_off;
|
|
u64 votes_on;
|
|
u64 votes_off;
|
|
};
|
|
|
|
enum qca_speed_type {
|
|
QCA_INIT_SPEED = 1,
|
|
QCA_OPER_SPEED
|
|
};
|
|
|
|
/*
|
|
* Voltage regulator information required for configuring the
|
|
* QCA Bluetooth chipset
|
|
*/
|
|
struct qca_vreg {
|
|
const char *name;
|
|
unsigned int min_uV;
|
|
unsigned int max_uV;
|
|
unsigned int load_uA;
|
|
};
|
|
|
|
struct qca_vreg_data {
|
|
enum qca_btsoc_type soc_type;
|
|
struct qca_vreg *vregs;
|
|
size_t num_vregs;
|
|
};
|
|
|
|
/*
|
|
* Platform data for the QCA Bluetooth power driver.
|
|
*/
|
|
struct qca_power {
|
|
struct device *dev;
|
|
const struct qca_vreg_data *vreg_data;
|
|
struct regulator_bulk_data *vreg_bulk;
|
|
bool vregs_on;
|
|
};
|
|
|
|
struct qca_serdev {
|
|
struct hci_uart serdev_hu;
|
|
struct gpio_desc *bt_en;
|
|
struct clk *susclk;
|
|
enum qca_btsoc_type btsoc_type;
|
|
struct qca_power *bt_power;
|
|
u32 init_speed;
|
|
u32 oper_speed;
|
|
};
|
|
|
|
static int qca_power_setup(struct hci_uart *hu, bool on);
|
|
static void qca_power_shutdown(struct hci_uart *hu);
|
|
static int qca_power_off(struct hci_dev *hdev);
|
|
|
|
static void __serial_clock_on(struct tty_struct *tty)
|
|
{
|
|
/* TODO: Some chipset requires to enable UART clock on client
|
|
* side to save power consumption or manual work is required.
|
|
* Please put your code to control UART clock here if needed
|
|
*/
|
|
}
|
|
|
|
static void __serial_clock_off(struct tty_struct *tty)
|
|
{
|
|
/* TODO: Some chipset requires to disable UART clock on client
|
|
* side to save power consumption or manual work is required.
|
|
* Please put your code to control UART clock off here if needed
|
|
*/
|
|
}
|
|
|
|
/* serial_clock_vote needs to be called with the ibs lock held */
|
|
static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
|
|
{
|
|
struct qca_data *qca = hu->priv;
|
|
unsigned int diff;
|
|
|
|
bool old_vote = (qca->tx_vote | qca->rx_vote);
|
|
bool new_vote;
|
|
|
|
switch (vote) {
|
|
case HCI_IBS_VOTE_STATS_UPDATE:
|
|
diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
|
|
|
|
if (old_vote)
|
|
qca->vote_off_ms += diff;
|
|
else
|
|
qca->vote_on_ms += diff;
|
|
return;
|
|
|
|
case HCI_IBS_TX_VOTE_CLOCK_ON:
|
|
qca->tx_vote = true;
|
|
qca->tx_votes_on++;
|
|
new_vote = true;
|
|
break;
|
|
|
|
case HCI_IBS_RX_VOTE_CLOCK_ON:
|
|
qca->rx_vote = true;
|
|
qca->rx_votes_on++;
|
|
new_vote = true;
|
|
break;
|
|
|
|
case HCI_IBS_TX_VOTE_CLOCK_OFF:
|
|
qca->tx_vote = false;
|
|
qca->tx_votes_off++;
|
|
new_vote = qca->rx_vote | qca->tx_vote;
|
|
break;
|
|
|
|
case HCI_IBS_RX_VOTE_CLOCK_OFF:
|
|
qca->rx_vote = false;
|
|
qca->rx_votes_off++;
|
|
new_vote = qca->rx_vote | qca->tx_vote;
|
|
break;
|
|
|
|
default:
|
|
BT_ERR("Voting irregularity");
|
|
return;
|
|
}
|
|
|
|
if (new_vote != old_vote) {
|
|
if (new_vote)
|
|
__serial_clock_on(hu->tty);
|
|
else
|
|
__serial_clock_off(hu->tty);
|
|
|
|
BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false",
|
|
vote ? "true" : "false");
|
|
|
|
diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
|
|
|
|
if (new_vote) {
|
|
qca->votes_on++;
|
|
qca->vote_off_ms += diff;
|
|
} else {
|
|
qca->votes_off++;
|
|
qca->vote_on_ms += diff;
|
|
}
|
|
qca->vote_last_jif = jiffies;
|
|
}
|
|
}
|
|
|
|
/* Builds and sends an HCI_IBS command packet.
|
|
* These are very simple packets with only 1 cmd byte.
|
|
*/
|
|
static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
|
|
{
|
|
int err = 0;
|
|
struct sk_buff *skb = NULL;
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
|
|
|
|
skb = bt_skb_alloc(1, GFP_ATOMIC);
|
|
if (!skb) {
|
|
BT_ERR("Failed to allocate memory for HCI_IBS packet");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Assign HCI_IBS type */
|
|
skb_put_u8(skb, cmd);
|
|
|
|
skb_queue_tail(&qca->txq, skb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void qca_wq_awake_device(struct work_struct *work)
|
|
{
|
|
struct qca_data *qca = container_of(work, struct qca_data,
|
|
ws_awake_device);
|
|
struct hci_uart *hu = qca->hu;
|
|
unsigned long retrans_delay;
|
|
|
|
BT_DBG("hu %p wq awake device", hu);
|
|
|
|
/* Vote for serial clock */
|
|
serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
|
|
|
|
spin_lock(&qca->hci_ibs_lock);
|
|
|
|
/* Send wake indication to device */
|
|
if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
|
|
BT_ERR("Failed to send WAKE to device");
|
|
|
|
qca->ibs_sent_wakes++;
|
|
|
|
/* Start retransmit timer */
|
|
retrans_delay = msecs_to_jiffies(qca->wake_retrans);
|
|
mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
|
|
|
|
spin_unlock(&qca->hci_ibs_lock);
|
|
|
|
/* Actually send the packets */
|
|
hci_uart_tx_wakeup(hu);
|
|
}
|
|
|
|
static void qca_wq_awake_rx(struct work_struct *work)
|
|
{
|
|
struct qca_data *qca = container_of(work, struct qca_data,
|
|
ws_awake_rx);
|
|
struct hci_uart *hu = qca->hu;
|
|
|
|
BT_DBG("hu %p wq awake rx", hu);
|
|
|
|
serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
|
|
|
|
spin_lock(&qca->hci_ibs_lock);
|
|
qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
|
|
|
|
/* Always acknowledge device wake up,
|
|
* sending IBS message doesn't count as TX ON.
|
|
*/
|
|
if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
|
|
BT_ERR("Failed to acknowledge device wake up");
|
|
|
|
qca->ibs_sent_wacks++;
|
|
|
|
spin_unlock(&qca->hci_ibs_lock);
|
|
|
|
/* Actually send the packets */
|
|
hci_uart_tx_wakeup(hu);
|
|
}
|
|
|
|
static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
|
|
{
|
|
struct qca_data *qca = container_of(work, struct qca_data,
|
|
ws_rx_vote_off);
|
|
struct hci_uart *hu = qca->hu;
|
|
|
|
BT_DBG("hu %p rx clock vote off", hu);
|
|
|
|
serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
|
|
}
|
|
|
|
static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
|
|
{
|
|
struct qca_data *qca = container_of(work, struct qca_data,
|
|
ws_tx_vote_off);
|
|
struct hci_uart *hu = qca->hu;
|
|
|
|
BT_DBG("hu %p tx clock vote off", hu);
|
|
|
|
/* Run HCI tx handling unlocked */
|
|
hci_uart_tx_wakeup(hu);
|
|
|
|
/* Now that message queued to tty driver, vote for tty clocks off.
|
|
* It is up to the tty driver to pend the clocks off until tx done.
|
|
*/
|
|
serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
|
|
}
|
|
|
|
static void hci_ibs_tx_idle_timeout(struct timer_list *t)
|
|
{
|
|
struct qca_data *qca = from_timer(qca, t, tx_idle_timer);
|
|
struct hci_uart *hu = qca->hu;
|
|
unsigned long flags;
|
|
|
|
BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
|
|
|
|
spin_lock_irqsave_nested(&qca->hci_ibs_lock,
|
|
flags, SINGLE_DEPTH_NESTING);
|
|
|
|
switch (qca->tx_ibs_state) {
|
|
case HCI_IBS_TX_AWAKE:
|
|
/* TX_IDLE, go to SLEEP */
|
|
if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
|
|
BT_ERR("Failed to send SLEEP to device");
|
|
break;
|
|
}
|
|
qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
|
|
qca->ibs_sent_slps++;
|
|
queue_work(qca->workqueue, &qca->ws_tx_vote_off);
|
|
break;
|
|
|
|
case HCI_IBS_TX_ASLEEP:
|
|
case HCI_IBS_TX_WAKING:
|
|
/* Fall through */
|
|
|
|
default:
|
|
BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
}
|
|
|
|
static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
|
|
{
|
|
struct qca_data *qca = from_timer(qca, t, wake_retrans_timer);
|
|
struct hci_uart *hu = qca->hu;
|
|
unsigned long flags, retrans_delay;
|
|
bool retransmit = false;
|
|
|
|
BT_DBG("hu %p wake retransmit timeout in %d state",
|
|
hu, qca->tx_ibs_state);
|
|
|
|
spin_lock_irqsave_nested(&qca->hci_ibs_lock,
|
|
flags, SINGLE_DEPTH_NESTING);
|
|
|
|
switch (qca->tx_ibs_state) {
|
|
case HCI_IBS_TX_WAKING:
|
|
/* No WAKE_ACK, retransmit WAKE */
|
|
retransmit = true;
|
|
if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
|
|
BT_ERR("Failed to acknowledge device wake up");
|
|
break;
|
|
}
|
|
qca->ibs_sent_wakes++;
|
|
retrans_delay = msecs_to_jiffies(qca->wake_retrans);
|
|
mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
|
|
break;
|
|
|
|
case HCI_IBS_TX_ASLEEP:
|
|
case HCI_IBS_TX_AWAKE:
|
|
/* Fall through */
|
|
|
|
default:
|
|
BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
|
|
if (retransmit)
|
|
hci_uart_tx_wakeup(hu);
|
|
}
|
|
|
|
/* Initialize protocol */
|
|
static int qca_open(struct hci_uart *hu)
|
|
{
|
|
struct qca_serdev *qcadev;
|
|
struct qca_data *qca;
|
|
int ret;
|
|
|
|
BT_DBG("hu %p qca_open", hu);
|
|
|
|
qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
|
|
if (!qca)
|
|
return -ENOMEM;
|
|
|
|
skb_queue_head_init(&qca->txq);
|
|
skb_queue_head_init(&qca->tx_wait_q);
|
|
spin_lock_init(&qca->hci_ibs_lock);
|
|
qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
|
|
if (!qca->workqueue) {
|
|
BT_ERR("QCA Workqueue not initialized properly");
|
|
kfree(qca);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
|
|
INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
|
|
INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
|
|
INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
|
|
|
|
qca->hu = hu;
|
|
|
|
/* Assume we start with both sides asleep -- extra wakes OK */
|
|
qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
|
|
qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
|
|
|
|
/* clocks actually on, but we start votes off */
|
|
qca->tx_vote = false;
|
|
qca->rx_vote = false;
|
|
qca->flags = 0;
|
|
|
|
qca->ibs_sent_wacks = 0;
|
|
qca->ibs_sent_slps = 0;
|
|
qca->ibs_sent_wakes = 0;
|
|
qca->ibs_recv_wacks = 0;
|
|
qca->ibs_recv_slps = 0;
|
|
qca->ibs_recv_wakes = 0;
|
|
qca->vote_last_jif = jiffies;
|
|
qca->vote_on_ms = 0;
|
|
qca->vote_off_ms = 0;
|
|
qca->votes_on = 0;
|
|
qca->votes_off = 0;
|
|
qca->tx_votes_on = 0;
|
|
qca->tx_votes_off = 0;
|
|
qca->rx_votes_on = 0;
|
|
qca->rx_votes_off = 0;
|
|
|
|
hu->priv = qca;
|
|
|
|
if (hu->serdev) {
|
|
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (qcadev->btsoc_type != QCA_WCN3990) {
|
|
gpiod_set_value_cansleep(qcadev->bt_en, 1);
|
|
} else {
|
|
hu->init_speed = qcadev->init_speed;
|
|
hu->oper_speed = qcadev->oper_speed;
|
|
ret = qca_power_setup(hu, true);
|
|
if (ret) {
|
|
destroy_workqueue(qca->workqueue);
|
|
kfree_skb(qca->rx_skb);
|
|
hu->priv = NULL;
|
|
kfree(qca);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
|
|
qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
|
|
|
|
timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
|
|
qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
|
|
|
|
BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
|
|
qca->tx_idle_delay, qca->wake_retrans);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qca_debugfs_init(struct hci_dev *hdev)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
struct qca_data *qca = hu->priv;
|
|
struct dentry *ibs_dir;
|
|
umode_t mode;
|
|
|
|
if (!hdev->debugfs)
|
|
return;
|
|
|
|
ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
|
|
|
|
/* read only */
|
|
mode = S_IRUGO;
|
|
debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
|
|
debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
|
|
debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
|
|
&qca->ibs_sent_slps);
|
|
debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
|
|
&qca->ibs_sent_wakes);
|
|
debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
|
|
&qca->ibs_sent_wacks);
|
|
debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
|
|
&qca->ibs_recv_slps);
|
|
debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
|
|
&qca->ibs_recv_wakes);
|
|
debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
|
|
&qca->ibs_recv_wacks);
|
|
debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
|
|
debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
|
|
debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
|
|
debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
|
|
debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
|
|
debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
|
|
debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
|
|
debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
|
|
debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
|
|
debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
|
|
|
|
/* read/write */
|
|
mode = S_IRUGO | S_IWUSR;
|
|
debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
|
|
debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
|
|
&qca->tx_idle_delay);
|
|
}
|
|
|
|
/* Flush protocol data */
|
|
static int qca_flush(struct hci_uart *hu)
|
|
{
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p qca flush", hu);
|
|
|
|
skb_queue_purge(&qca->tx_wait_q);
|
|
skb_queue_purge(&qca->txq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Close protocol */
|
|
static int qca_close(struct hci_uart *hu)
|
|
{
|
|
struct qca_serdev *qcadev;
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p qca close", hu);
|
|
|
|
serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
|
|
|
|
skb_queue_purge(&qca->tx_wait_q);
|
|
skb_queue_purge(&qca->txq);
|
|
del_timer(&qca->tx_idle_timer);
|
|
del_timer(&qca->wake_retrans_timer);
|
|
destroy_workqueue(qca->workqueue);
|
|
qca->hu = NULL;
|
|
|
|
if (hu->serdev) {
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
qca_power_shutdown(hu);
|
|
else
|
|
gpiod_set_value_cansleep(qcadev->bt_en, 0);
|
|
|
|
}
|
|
|
|
kfree_skb(qca->rx_skb);
|
|
|
|
hu->priv = NULL;
|
|
|
|
kfree(qca);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called upon a wake-up-indication from the device.
|
|
*/
|
|
static void device_want_to_wakeup(struct hci_uart *hu)
|
|
{
|
|
unsigned long flags;
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p want to wake up", hu);
|
|
|
|
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
|
|
|
|
qca->ibs_recv_wakes++;
|
|
|
|
switch (qca->rx_ibs_state) {
|
|
case HCI_IBS_RX_ASLEEP:
|
|
/* Make sure clock is on - we may have turned clock off since
|
|
* receiving the wake up indicator awake rx clock.
|
|
*/
|
|
queue_work(qca->workqueue, &qca->ws_awake_rx);
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
return;
|
|
|
|
case HCI_IBS_RX_AWAKE:
|
|
/* Always acknowledge device wake up,
|
|
* sending IBS message doesn't count as TX ON.
|
|
*/
|
|
if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
|
|
BT_ERR("Failed to acknowledge device wake up");
|
|
break;
|
|
}
|
|
qca->ibs_sent_wacks++;
|
|
break;
|
|
|
|
default:
|
|
/* Any other state is illegal */
|
|
BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
|
|
qca->rx_ibs_state);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
|
|
/* Actually send the packets */
|
|
hci_uart_tx_wakeup(hu);
|
|
}
|
|
|
|
/* Called upon a sleep-indication from the device.
|
|
*/
|
|
static void device_want_to_sleep(struct hci_uart *hu)
|
|
{
|
|
unsigned long flags;
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p want to sleep", hu);
|
|
|
|
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
|
|
|
|
qca->ibs_recv_slps++;
|
|
|
|
switch (qca->rx_ibs_state) {
|
|
case HCI_IBS_RX_AWAKE:
|
|
/* Update state */
|
|
qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
|
|
/* Vote off rx clock under workqueue */
|
|
queue_work(qca->workqueue, &qca->ws_rx_vote_off);
|
|
break;
|
|
|
|
case HCI_IBS_RX_ASLEEP:
|
|
/* Fall through */
|
|
|
|
default:
|
|
/* Any other state is illegal */
|
|
BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
|
|
qca->rx_ibs_state);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
}
|
|
|
|
/* Called upon wake-up-acknowledgement from the device
|
|
*/
|
|
static void device_woke_up(struct hci_uart *hu)
|
|
{
|
|
unsigned long flags, idle_delay;
|
|
struct qca_data *qca = hu->priv;
|
|
struct sk_buff *skb = NULL;
|
|
|
|
BT_DBG("hu %p woke up", hu);
|
|
|
|
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
|
|
|
|
qca->ibs_recv_wacks++;
|
|
|
|
switch (qca->tx_ibs_state) {
|
|
case HCI_IBS_TX_AWAKE:
|
|
/* Expect one if we send 2 WAKEs */
|
|
BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
|
|
qca->tx_ibs_state);
|
|
break;
|
|
|
|
case HCI_IBS_TX_WAKING:
|
|
/* Send pending packets */
|
|
while ((skb = skb_dequeue(&qca->tx_wait_q)))
|
|
skb_queue_tail(&qca->txq, skb);
|
|
|
|
/* Switch timers and change state to HCI_IBS_TX_AWAKE */
|
|
del_timer(&qca->wake_retrans_timer);
|
|
idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
|
|
mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
|
|
qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
|
|
break;
|
|
|
|
case HCI_IBS_TX_ASLEEP:
|
|
/* Fall through */
|
|
|
|
default:
|
|
BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
|
|
qca->tx_ibs_state);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
|
|
/* Actually send the packets */
|
|
hci_uart_tx_wakeup(hu);
|
|
}
|
|
|
|
/* Enqueue frame for transmittion (padding, crc, etc) may be called from
|
|
* two simultaneous tasklets.
|
|
*/
|
|
static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
|
|
{
|
|
unsigned long flags = 0, idle_delay;
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
|
|
qca->tx_ibs_state);
|
|
|
|
/* Prepend skb with frame type */
|
|
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
|
|
|
|
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
|
|
|
|
/* Don't go to sleep in middle of patch download or
|
|
* Out-Of-Band(GPIOs control) sleep is selected.
|
|
*/
|
|
if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
|
|
skb_queue_tail(&qca->txq, skb);
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* Act according to current state */
|
|
switch (qca->tx_ibs_state) {
|
|
case HCI_IBS_TX_AWAKE:
|
|
BT_DBG("Device awake, sending normally");
|
|
skb_queue_tail(&qca->txq, skb);
|
|
idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
|
|
mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
|
|
break;
|
|
|
|
case HCI_IBS_TX_ASLEEP:
|
|
BT_DBG("Device asleep, waking up and queueing packet");
|
|
/* Save packet for later */
|
|
skb_queue_tail(&qca->tx_wait_q, skb);
|
|
|
|
qca->tx_ibs_state = HCI_IBS_TX_WAKING;
|
|
/* Schedule a work queue to wake up device */
|
|
queue_work(qca->workqueue, &qca->ws_awake_device);
|
|
break;
|
|
|
|
case HCI_IBS_TX_WAKING:
|
|
BT_DBG("Device waking up, queueing packet");
|
|
/* Transient state; just keep packet for later */
|
|
skb_queue_tail(&qca->tx_wait_q, skb);
|
|
break;
|
|
|
|
default:
|
|
BT_ERR("Illegal tx state: %d (losing packet)",
|
|
qca->tx_ibs_state);
|
|
kfree_skb(skb);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
|
|
BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
|
|
|
|
device_want_to_sleep(hu);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
|
|
BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
|
|
|
|
device_want_to_wakeup(hu);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
|
|
BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
|
|
|
|
device_woke_up(hu);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
/* We receive debug logs from chip as an ACL packets.
|
|
* Instead of sending the data to ACL to decode the
|
|
* received data, we are pushing them to the above layers
|
|
* as a diagnostic packet.
|
|
*/
|
|
if (get_unaligned_le16(skb->data) == QCA_DEBUG_HANDLE)
|
|
return hci_recv_diag(hdev, skb);
|
|
|
|
return hci_recv_frame(hdev, skb);
|
|
}
|
|
|
|
#define QCA_IBS_SLEEP_IND_EVENT \
|
|
.type = HCI_IBS_SLEEP_IND, \
|
|
.hlen = 0, \
|
|
.loff = 0, \
|
|
.lsize = 0, \
|
|
.maxlen = HCI_MAX_IBS_SIZE
|
|
|
|
#define QCA_IBS_WAKE_IND_EVENT \
|
|
.type = HCI_IBS_WAKE_IND, \
|
|
.hlen = 0, \
|
|
.loff = 0, \
|
|
.lsize = 0, \
|
|
.maxlen = HCI_MAX_IBS_SIZE
|
|
|
|
#define QCA_IBS_WAKE_ACK_EVENT \
|
|
.type = HCI_IBS_WAKE_ACK, \
|
|
.hlen = 0, \
|
|
.loff = 0, \
|
|
.lsize = 0, \
|
|
.maxlen = HCI_MAX_IBS_SIZE
|
|
|
|
static const struct h4_recv_pkt qca_recv_pkts[] = {
|
|
{ H4_RECV_ACL, .recv = qca_recv_acl_data },
|
|
{ H4_RECV_SCO, .recv = hci_recv_frame },
|
|
{ H4_RECV_EVENT, .recv = hci_recv_frame },
|
|
{ QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
|
|
{ QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
|
|
{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
|
|
};
|
|
|
|
static int qca_recv(struct hci_uart *hu, const void *data, int count)
|
|
{
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
|
|
return -EUNATCH;
|
|
|
|
qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
|
|
qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
|
|
if (IS_ERR(qca->rx_skb)) {
|
|
int err = PTR_ERR(qca->rx_skb);
|
|
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
|
|
qca->rx_skb = NULL;
|
|
return err;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct sk_buff *qca_dequeue(struct hci_uart *hu)
|
|
{
|
|
struct qca_data *qca = hu->priv;
|
|
|
|
return skb_dequeue(&qca->txq);
|
|
}
|
|
|
|
static uint8_t qca_get_baudrate_value(int speed)
|
|
{
|
|
switch (speed) {
|
|
case 9600:
|
|
return QCA_BAUDRATE_9600;
|
|
case 19200:
|
|
return QCA_BAUDRATE_19200;
|
|
case 38400:
|
|
return QCA_BAUDRATE_38400;
|
|
case 57600:
|
|
return QCA_BAUDRATE_57600;
|
|
case 115200:
|
|
return QCA_BAUDRATE_115200;
|
|
case 230400:
|
|
return QCA_BAUDRATE_230400;
|
|
case 460800:
|
|
return QCA_BAUDRATE_460800;
|
|
case 500000:
|
|
return QCA_BAUDRATE_500000;
|
|
case 921600:
|
|
return QCA_BAUDRATE_921600;
|
|
case 1000000:
|
|
return QCA_BAUDRATE_1000000;
|
|
case 2000000:
|
|
return QCA_BAUDRATE_2000000;
|
|
case 3000000:
|
|
return QCA_BAUDRATE_3000000;
|
|
case 3200000:
|
|
return QCA_BAUDRATE_3200000;
|
|
case 3500000:
|
|
return QCA_BAUDRATE_3500000;
|
|
default:
|
|
return QCA_BAUDRATE_115200;
|
|
}
|
|
}
|
|
|
|
static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
struct qca_data *qca = hu->priv;
|
|
struct qca_serdev *qcadev;
|
|
struct sk_buff *skb;
|
|
u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
|
|
|
|
if (baudrate > QCA_BAUDRATE_3200000)
|
|
return -EINVAL;
|
|
|
|
cmd[4] = baudrate;
|
|
|
|
skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
|
|
if (!skb) {
|
|
bt_dev_err(hdev, "Failed to allocate baudrate packet");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Assign commands to change baudrate and packet type. */
|
|
skb_put_data(skb, cmd, sizeof(cmd));
|
|
hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
|
|
|
|
skb_queue_tail(&qca->txq, skb);
|
|
hci_uart_tx_wakeup(hu);
|
|
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
|
|
/* Wait for the baudrate change request to be sent */
|
|
|
|
while (!skb_queue_empty(&qca->txq))
|
|
usleep_range(100, 200);
|
|
|
|
serdev_device_wait_until_sent(hu->serdev,
|
|
msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
|
|
|
|
/* Give the controller time to process the request */
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
msleep(10);
|
|
else
|
|
msleep(300);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
|
|
{
|
|
if (hu->serdev)
|
|
serdev_device_set_baudrate(hu->serdev, speed);
|
|
else
|
|
hci_uart_set_baudrate(hu, speed);
|
|
}
|
|
|
|
static int qca_send_power_pulse(struct hci_uart *hu, bool on)
|
|
{
|
|
int ret;
|
|
int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
|
|
u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE;
|
|
|
|
/* These power pulses are single byte command which are sent
|
|
* at required baudrate to wcn3990. On wcn3990, we have an external
|
|
* circuit at Tx pin which decodes the pulse sent at specific baudrate.
|
|
* For example, wcn3990 supports RF COEX antenna for both Wi-Fi/BT
|
|
* and also we use the same power inputs to turn on and off for
|
|
* Wi-Fi/BT. Powering up the power sources will not enable BT, until
|
|
* we send a power on pulse at 115200 bps. This algorithm will help to
|
|
* save power. Disabling hardware flow control is mandatory while
|
|
* sending power pulses to SoC.
|
|
*/
|
|
bt_dev_dbg(hu->hdev, "sending power pulse %02x to controller", cmd);
|
|
|
|
serdev_device_write_flush(hu->serdev);
|
|
hci_uart_set_flow_control(hu, true);
|
|
ret = serdev_device_write_buf(hu->serdev, &cmd, sizeof(cmd));
|
|
if (ret < 0) {
|
|
bt_dev_err(hu->hdev, "failed to send power pulse %02x", cmd);
|
|
return ret;
|
|
}
|
|
|
|
serdev_device_wait_until_sent(hu->serdev, timeout);
|
|
hci_uart_set_flow_control(hu, false);
|
|
|
|
/* Give to controller time to boot/shutdown */
|
|
if (on)
|
|
msleep(100);
|
|
else
|
|
msleep(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int qca_get_speed(struct hci_uart *hu,
|
|
enum qca_speed_type speed_type)
|
|
{
|
|
unsigned int speed = 0;
|
|
|
|
if (speed_type == QCA_INIT_SPEED) {
|
|
if (hu->init_speed)
|
|
speed = hu->init_speed;
|
|
else if (hu->proto->init_speed)
|
|
speed = hu->proto->init_speed;
|
|
} else {
|
|
if (hu->oper_speed)
|
|
speed = hu->oper_speed;
|
|
else if (hu->proto->oper_speed)
|
|
speed = hu->proto->oper_speed;
|
|
}
|
|
|
|
return speed;
|
|
}
|
|
|
|
static int qca_check_speeds(struct hci_uart *hu)
|
|
{
|
|
struct qca_serdev *qcadev;
|
|
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (qcadev->btsoc_type == QCA_WCN3990) {
|
|
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
|
|
!qca_get_speed(hu, QCA_OPER_SPEED))
|
|
return -EINVAL;
|
|
} else {
|
|
if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
|
|
!qca_get_speed(hu, QCA_OPER_SPEED))
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
|
|
{
|
|
unsigned int speed, qca_baudrate;
|
|
struct qca_serdev *qcadev;
|
|
int ret = 0;
|
|
|
|
if (speed_type == QCA_INIT_SPEED) {
|
|
speed = qca_get_speed(hu, QCA_INIT_SPEED);
|
|
if (speed)
|
|
host_set_baudrate(hu, speed);
|
|
} else {
|
|
speed = qca_get_speed(hu, QCA_OPER_SPEED);
|
|
if (!speed)
|
|
return 0;
|
|
|
|
/* Disable flow control for wcn3990 to deassert RTS while
|
|
* changing the baudrate of chip and host.
|
|
*/
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
hci_uart_set_flow_control(hu, true);
|
|
|
|
qca_baudrate = qca_get_baudrate_value(speed);
|
|
bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
|
|
ret = qca_set_baudrate(hu->hdev, qca_baudrate);
|
|
if (ret)
|
|
goto error;
|
|
|
|
host_set_baudrate(hu, speed);
|
|
|
|
error:
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
hci_uart_set_flow_control(hu, false);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qca_wcn3990_init(struct hci_uart *hu)
|
|
{
|
|
struct qca_serdev *qcadev;
|
|
int ret;
|
|
|
|
/* Check for vregs status, may be hci down has turned
|
|
* off the voltage regulator.
|
|
*/
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (!qcadev->bt_power->vregs_on) {
|
|
serdev_device_close(hu->serdev);
|
|
ret = qca_power_setup(hu, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = serdev_device_open(hu->serdev);
|
|
if (ret) {
|
|
bt_dev_err(hu->hdev, "failed to open port");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Forcefully enable wcn3990 to enter in to boot mode. */
|
|
host_set_baudrate(hu, 2400);
|
|
ret = qca_send_power_pulse(hu, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
qca_set_speed(hu, QCA_INIT_SPEED);
|
|
ret = qca_send_power_pulse(hu, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Now the device is in ready state to communicate with host.
|
|
* To sync host with device we need to reopen port.
|
|
* Without this, we will have RTS and CTS synchronization
|
|
* issues.
|
|
*/
|
|
serdev_device_close(hu->serdev);
|
|
ret = serdev_device_open(hu->serdev);
|
|
if (ret) {
|
|
bt_dev_err(hu->hdev, "failed to open port");
|
|
return ret;
|
|
}
|
|
|
|
hci_uart_set_flow_control(hu, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca_setup(struct hci_uart *hu)
|
|
{
|
|
struct hci_dev *hdev = hu->hdev;
|
|
struct qca_data *qca = hu->priv;
|
|
unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
|
|
struct qca_serdev *qcadev;
|
|
int ret;
|
|
int soc_ver = 0;
|
|
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
|
|
ret = qca_check_speeds(hu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Patch downloading has to be done without IBS mode */
|
|
clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
|
|
|
|
if (qcadev->btsoc_type == QCA_WCN3990) {
|
|
bt_dev_info(hdev, "setting up wcn3990");
|
|
|
|
/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
|
|
* setup for every hci up.
|
|
*/
|
|
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
|
|
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
|
|
hu->hdev->shutdown = qca_power_off;
|
|
ret = qca_wcn3990_init(hu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca_read_soc_version(hdev, &soc_ver);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
bt_dev_info(hdev, "ROME setup");
|
|
qca_set_speed(hu, QCA_INIT_SPEED);
|
|
}
|
|
|
|
/* Setup user speed if needed */
|
|
speed = qca_get_speed(hu, QCA_OPER_SPEED);
|
|
if (speed) {
|
|
ret = qca_set_speed(hu, QCA_OPER_SPEED);
|
|
if (ret)
|
|
return ret;
|
|
|
|
qca_baudrate = qca_get_baudrate_value(speed);
|
|
}
|
|
|
|
if (qcadev->btsoc_type != QCA_WCN3990) {
|
|
/* Get QCA version information */
|
|
ret = qca_read_soc_version(hdev, &soc_ver);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
|
|
/* Setup patch / NVM configurations */
|
|
ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
|
|
if (!ret) {
|
|
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
|
|
qca_debugfs_init(hdev);
|
|
} else if (ret == -ENOENT) {
|
|
/* No patch/nvm-config found, run with original fw/config */
|
|
ret = 0;
|
|
} else if (ret == -EAGAIN) {
|
|
/*
|
|
* Userspace firmware loader will return -EAGAIN in case no
|
|
* patch/nvm-config is found, so run with original fw/config.
|
|
*/
|
|
ret = 0;
|
|
}
|
|
|
|
/* Setup bdaddr */
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
hu->hdev->set_bdaddr = qca_set_bdaddr;
|
|
else
|
|
hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct hci_uart_proto qca_proto = {
|
|
.id = HCI_UART_QCA,
|
|
.name = "QCA",
|
|
.manufacturer = 29,
|
|
.init_speed = 115200,
|
|
.oper_speed = 3000000,
|
|
.open = qca_open,
|
|
.close = qca_close,
|
|
.flush = qca_flush,
|
|
.setup = qca_setup,
|
|
.recv = qca_recv,
|
|
.enqueue = qca_enqueue,
|
|
.dequeue = qca_dequeue,
|
|
};
|
|
|
|
static const struct qca_vreg_data qca_soc_data = {
|
|
.soc_type = QCA_WCN3990,
|
|
.vregs = (struct qca_vreg []) {
|
|
{ "vddio", 1800000, 1900000, 15000 },
|
|
{ "vddxo", 1800000, 1900000, 80000 },
|
|
{ "vddrf", 1300000, 1350000, 300000 },
|
|
{ "vddch0", 3300000, 3400000, 450000 },
|
|
},
|
|
.num_vregs = 4,
|
|
};
|
|
|
|
static void qca_power_shutdown(struct hci_uart *hu)
|
|
{
|
|
struct qca_data *qca = hu->priv;
|
|
unsigned long flags;
|
|
|
|
/* From this point we go into power off state. But serial port is
|
|
* still open, stop queueing the IBS data and flush all the buffered
|
|
* data in skb's.
|
|
*/
|
|
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
|
|
clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
|
|
qca_flush(hu);
|
|
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
|
|
|
|
host_set_baudrate(hu, 2400);
|
|
qca_send_power_pulse(hu, false);
|
|
qca_power_setup(hu, false);
|
|
}
|
|
|
|
static int qca_power_off(struct hci_dev *hdev)
|
|
{
|
|
struct hci_uart *hu = hci_get_drvdata(hdev);
|
|
|
|
qca_power_shutdown(hu);
|
|
return 0;
|
|
}
|
|
|
|
static int qca_enable_regulator(struct qca_vreg vregs,
|
|
struct regulator *regulator)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_set_voltage(regulator, vregs.min_uV,
|
|
vregs.max_uV);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (vregs.load_uA)
|
|
ret = regulator_set_load(regulator,
|
|
vregs.load_uA);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regulator_enable(regulator);
|
|
|
|
}
|
|
|
|
static void qca_disable_regulator(struct qca_vreg vregs,
|
|
struct regulator *regulator)
|
|
{
|
|
regulator_disable(regulator);
|
|
regulator_set_voltage(regulator, 0, vregs.max_uV);
|
|
if (vregs.load_uA)
|
|
regulator_set_load(regulator, 0);
|
|
|
|
}
|
|
|
|
static int qca_power_setup(struct hci_uart *hu, bool on)
|
|
{
|
|
struct qca_vreg *vregs;
|
|
struct regulator_bulk_data *vreg_bulk;
|
|
struct qca_serdev *qcadev;
|
|
int i, num_vregs, ret = 0;
|
|
|
|
qcadev = serdev_device_get_drvdata(hu->serdev);
|
|
if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
|
|
!qcadev->bt_power->vreg_bulk)
|
|
return -EINVAL;
|
|
|
|
vregs = qcadev->bt_power->vreg_data->vregs;
|
|
vreg_bulk = qcadev->bt_power->vreg_bulk;
|
|
num_vregs = qcadev->bt_power->vreg_data->num_vregs;
|
|
BT_DBG("on: %d", on);
|
|
if (on && !qcadev->bt_power->vregs_on) {
|
|
for (i = 0; i < num_vregs; i++) {
|
|
ret = qca_enable_regulator(vregs[i],
|
|
vreg_bulk[i].consumer);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (ret) {
|
|
BT_ERR("failed to enable regulator:%s", vregs[i].name);
|
|
/* turn off regulators which are enabled */
|
|
for (i = i - 1; i >= 0; i--)
|
|
qca_disable_regulator(vregs[i],
|
|
vreg_bulk[i].consumer);
|
|
} else {
|
|
qcadev->bt_power->vregs_on = true;
|
|
}
|
|
} else if (!on && qcadev->bt_power->vregs_on) {
|
|
/* turn off regulator in reverse order */
|
|
i = qcadev->bt_power->vreg_data->num_vregs - 1;
|
|
for ( ; i >= 0; i--)
|
|
qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
|
|
|
|
qcadev->bt_power->vregs_on = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qca_init_regulators(struct qca_power *qca,
|
|
const struct qca_vreg *vregs, size_t num_vregs)
|
|
{
|
|
int i;
|
|
|
|
qca->vreg_bulk = devm_kcalloc(qca->dev, num_vregs,
|
|
sizeof(struct regulator_bulk_data),
|
|
GFP_KERNEL);
|
|
if (!qca->vreg_bulk)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_vregs; i++)
|
|
qca->vreg_bulk[i].supply = vregs[i].name;
|
|
|
|
return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
|
|
}
|
|
|
|
static int qca_serdev_probe(struct serdev_device *serdev)
|
|
{
|
|
struct qca_serdev *qcadev;
|
|
const struct qca_vreg_data *data;
|
|
int err;
|
|
|
|
qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
|
|
if (!qcadev)
|
|
return -ENOMEM;
|
|
|
|
qcadev->serdev_hu.serdev = serdev;
|
|
data = of_device_get_match_data(&serdev->dev);
|
|
serdev_device_set_drvdata(serdev, qcadev);
|
|
if (data && data->soc_type == QCA_WCN3990) {
|
|
qcadev->btsoc_type = QCA_WCN3990;
|
|
qcadev->bt_power = devm_kzalloc(&serdev->dev,
|
|
sizeof(struct qca_power),
|
|
GFP_KERNEL);
|
|
if (!qcadev->bt_power)
|
|
return -ENOMEM;
|
|
|
|
qcadev->bt_power->dev = &serdev->dev;
|
|
qcadev->bt_power->vreg_data = data;
|
|
err = qca_init_regulators(qcadev->bt_power, data->vregs,
|
|
data->num_vregs);
|
|
if (err) {
|
|
BT_ERR("Failed to init regulators:%d", err);
|
|
goto out;
|
|
}
|
|
|
|
qcadev->bt_power->vregs_on = false;
|
|
|
|
device_property_read_u32(&serdev->dev, "max-speed",
|
|
&qcadev->oper_speed);
|
|
if (!qcadev->oper_speed)
|
|
BT_DBG("UART will pick default operating speed");
|
|
|
|
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
|
|
if (err) {
|
|
BT_ERR("wcn3990 serdev registration failed");
|
|
goto out;
|
|
}
|
|
} else {
|
|
qcadev->btsoc_type = QCA_ROME;
|
|
qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(qcadev->bt_en)) {
|
|
dev_err(&serdev->dev, "failed to acquire enable gpio\n");
|
|
return PTR_ERR(qcadev->bt_en);
|
|
}
|
|
|
|
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
|
|
if (IS_ERR(qcadev->susclk)) {
|
|
dev_err(&serdev->dev, "failed to acquire clk\n");
|
|
return PTR_ERR(qcadev->susclk);
|
|
}
|
|
|
|
err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
|
|
if (err)
|
|
return err;
|
|
|
|
err = clk_prepare_enable(qcadev->susclk);
|
|
if (err)
|
|
return err;
|
|
|
|
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
|
|
if (err)
|
|
clk_disable_unprepare(qcadev->susclk);
|
|
}
|
|
|
|
out: return err;
|
|
|
|
}
|
|
|
|
static void qca_serdev_remove(struct serdev_device *serdev)
|
|
{
|
|
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
|
|
|
|
if (qcadev->btsoc_type == QCA_WCN3990)
|
|
qca_power_shutdown(&qcadev->serdev_hu);
|
|
else
|
|
clk_disable_unprepare(qcadev->susclk);
|
|
|
|
hci_uart_unregister_device(&qcadev->serdev_hu);
|
|
}
|
|
|
|
static const struct of_device_id qca_bluetooth_of_match[] = {
|
|
{ .compatible = "qcom,qca6174-bt" },
|
|
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
|
|
|
|
static struct serdev_device_driver qca_serdev_driver = {
|
|
.probe = qca_serdev_probe,
|
|
.remove = qca_serdev_remove,
|
|
.driver = {
|
|
.name = "hci_uart_qca",
|
|
.of_match_table = qca_bluetooth_of_match,
|
|
},
|
|
};
|
|
|
|
int __init qca_init(void)
|
|
{
|
|
serdev_device_driver_register(&qca_serdev_driver);
|
|
|
|
return hci_uart_register_proto(&qca_proto);
|
|
}
|
|
|
|
int __exit qca_deinit(void)
|
|
{
|
|
serdev_device_driver_unregister(&qca_serdev_driver);
|
|
|
|
return hci_uart_unregister_proto(&qca_proto);
|
|
}
|