Eli Cohen f828ca6a2f net/mlx5e: Add support for hw encapsulation of MPLS over UDP ... MPLS over UDP is supported by adding a rule on a representor net device which does tunnel_key set, push mpls and forward to a baredup device. At the hardware level we use a packet_reformat_context object to do the encapsulation of the packet. The resulting packet looks as follows (left side transmitted first): outer L2 | outer IP | UDP | MPLS | inner L3 and data | Example usage: tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \ action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \ dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \ label 555 tc 3 action mirred egress redirect dev bareudp0 This is how the filter is shown with tc filter show: tc filter show dev enp59s0f0_0 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 skip_sw in_hw in_hw_count 1 action order 1: tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 key_id 555 dst_port 6635 csum tos 0x4 ttl 6 pipe index 1 ref 1 bind 1 action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe index 1 ref 1 bind 1 action order 3: mirred (Egress Redirect to device bareudp0) stolen index 1 ref 1 bind 1 Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>		2020-05-22 16:46:18 -07:00
..
mlx4	mlx4: Add XDP frame size and adjust max XDP MTU	2020-05-14 21:21:55 -07:00
mlx5/core	net/mlx5e: Add support for hw encapsulation of MPLS over UDP	2020-05-22 16:46:18 -07:00
mlxfw
mlxsw	net: flow_offload: simplify hw stats check handling	2020-05-22 15:52:08 -07:00
Kconfig
Makefile