mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 09:20:50 +07:00
cb88a1b887
This patch (as1255) updates the interface for calling usb_hub_clear_tt_buffer(). Even the name of the function is changed! When an async URB (i.e., Control or Bulk) going through a high-speed hub to a non-high-speed device is cancelled or fails, the hub's Transaction Translator buffer may be left busy still trying to complete the transaction. The buffer has to be cleared; that's what usb_hub_clear_tt_buffer() does. It isn't safe to send any more URBs to the same endpoint until the TT buffer is fully clear. Therefore the HCD needs to be told when the Clear-TT-Buffer request has finished. This patch adds a callback method to struct hc_driver for that purpose, and makes the hub driver invoke the callback at the proper time. The patch also changes a couple of names; "hub_tt_kevent" and "tt.kevent" now look rather antiquated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
206 lines
5.5 KiB
C
206 lines
5.5 KiB
C
#ifndef __LINUX_HUB_H
|
|
#define __LINUX_HUB_H
|
|
|
|
/*
|
|
* Hub protocol and driver data structures.
|
|
*
|
|
* Some of these are known to the "virtual root hub" code
|
|
* in host controller drivers.
|
|
*/
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/compiler.h> /* likely()/unlikely() */
|
|
|
|
/*
|
|
* Hub request types
|
|
*/
|
|
|
|
#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
|
|
#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
|
|
|
|
/*
|
|
* Hub class requests
|
|
* See USB 2.0 spec Table 11-16
|
|
*/
|
|
#define HUB_CLEAR_TT_BUFFER 8
|
|
#define HUB_RESET_TT 9
|
|
#define HUB_GET_TT_STATE 10
|
|
#define HUB_STOP_TT 11
|
|
|
|
/*
|
|
* Hub Class feature numbers
|
|
* See USB 2.0 spec Table 11-17
|
|
*/
|
|
#define C_HUB_LOCAL_POWER 0
|
|
#define C_HUB_OVER_CURRENT 1
|
|
|
|
/*
|
|
* Port feature numbers
|
|
* See USB 2.0 spec Table 11-17
|
|
*/
|
|
#define USB_PORT_FEAT_CONNECTION 0
|
|
#define USB_PORT_FEAT_ENABLE 1
|
|
#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */
|
|
#define USB_PORT_FEAT_OVER_CURRENT 3
|
|
#define USB_PORT_FEAT_RESET 4
|
|
#define USB_PORT_FEAT_L1 5 /* L1 suspend */
|
|
#define USB_PORT_FEAT_POWER 8
|
|
#define USB_PORT_FEAT_LOWSPEED 9
|
|
/* This value was never in Table 11-17 */
|
|
#define USB_PORT_FEAT_HIGHSPEED 10
|
|
/* This value is also fake */
|
|
#define USB_PORT_FEAT_SUPERSPEED 11
|
|
#define USB_PORT_FEAT_C_CONNECTION 16
|
|
#define USB_PORT_FEAT_C_ENABLE 17
|
|
#define USB_PORT_FEAT_C_SUSPEND 18
|
|
#define USB_PORT_FEAT_C_OVER_CURRENT 19
|
|
#define USB_PORT_FEAT_C_RESET 20
|
|
#define USB_PORT_FEAT_TEST 21
|
|
#define USB_PORT_FEAT_INDICATOR 22
|
|
#define USB_PORT_FEAT_C_PORT_L1 23
|
|
|
|
/*
|
|
* Hub Status and Hub Change results
|
|
* See USB 2.0 spec Table 11-19 and Table 11-20
|
|
*/
|
|
struct usb_port_status {
|
|
__le16 wPortStatus;
|
|
__le16 wPortChange;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* wPortStatus bit field
|
|
* See USB 2.0 spec Table 11-21
|
|
*/
|
|
#define USB_PORT_STAT_CONNECTION 0x0001
|
|
#define USB_PORT_STAT_ENABLE 0x0002
|
|
#define USB_PORT_STAT_SUSPEND 0x0004
|
|
#define USB_PORT_STAT_OVERCURRENT 0x0008
|
|
#define USB_PORT_STAT_RESET 0x0010
|
|
#define USB_PORT_STAT_L1 0x0020
|
|
/* bits 6 to 7 are reserved */
|
|
#define USB_PORT_STAT_POWER 0x0100
|
|
#define USB_PORT_STAT_LOW_SPEED 0x0200
|
|
#define USB_PORT_STAT_HIGH_SPEED 0x0400
|
|
#define USB_PORT_STAT_TEST 0x0800
|
|
#define USB_PORT_STAT_INDICATOR 0x1000
|
|
/* bits 13 to 15 are reserved */
|
|
|
|
/*
|
|
* wPortChange bit field
|
|
* See USB 2.0 spec Table 11-22
|
|
* Bits 0 to 4 shown, bits 5 to 15 are reserved
|
|
*/
|
|
#define USB_PORT_STAT_C_CONNECTION 0x0001
|
|
#define USB_PORT_STAT_C_ENABLE 0x0002
|
|
#define USB_PORT_STAT_C_SUSPEND 0x0004
|
|
#define USB_PORT_STAT_C_OVERCURRENT 0x0008
|
|
#define USB_PORT_STAT_C_RESET 0x0010
|
|
#define USB_PORT_STAT_C_L1 0x0020
|
|
|
|
/*
|
|
* wHubCharacteristics (masks)
|
|
* See USB 2.0 spec Table 11-13, offset 3
|
|
*/
|
|
#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */
|
|
#define HUB_CHAR_COMPOUND 0x0004 /* D2 */
|
|
#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */
|
|
#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */
|
|
#define HUB_CHAR_PORTIND 0x0080 /* D7 */
|
|
|
|
struct usb_hub_status {
|
|
__le16 wHubStatus;
|
|
__le16 wHubChange;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* Hub Status & Hub Change bit masks
|
|
* See USB 2.0 spec Table 11-19 and Table 11-20
|
|
* Bits 0 and 1 for wHubStatus and wHubChange
|
|
* Bits 2 to 15 are reserved for both
|
|
*/
|
|
#define HUB_STATUS_LOCAL_POWER 0x0001
|
|
#define HUB_STATUS_OVERCURRENT 0x0002
|
|
#define HUB_CHANGE_LOCAL_POWER 0x0001
|
|
#define HUB_CHANGE_OVERCURRENT 0x0002
|
|
|
|
|
|
/*
|
|
* Hub descriptor
|
|
* See USB 2.0 spec Table 11-13
|
|
*/
|
|
|
|
#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
|
|
#define USB_DT_HUB_NONVAR_SIZE 7
|
|
|
|
struct usb_hub_descriptor {
|
|
__u8 bDescLength;
|
|
__u8 bDescriptorType;
|
|
__u8 bNbrPorts;
|
|
__le16 wHubCharacteristics;
|
|
__u8 bPwrOn2PwrGood;
|
|
__u8 bHubContrCurrent;
|
|
/* add 1 bit for hub status change; round to bytes */
|
|
__u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
|
|
__u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/* port indicator status selectors, tables 11-7 and 11-25 */
|
|
#define HUB_LED_AUTO 0
|
|
#define HUB_LED_AMBER 1
|
|
#define HUB_LED_GREEN 2
|
|
#define HUB_LED_OFF 3
|
|
|
|
enum hub_led_mode {
|
|
INDICATOR_AUTO = 0,
|
|
INDICATOR_CYCLE,
|
|
/* software blinks for attention: software, hardware, reserved */
|
|
INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
|
|
INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
|
|
INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
|
|
} __attribute__ ((packed));
|
|
|
|
struct usb_device;
|
|
|
|
/* Transaction Translator Think Times, in bits */
|
|
#define HUB_TTTT_8_BITS 0x00
|
|
#define HUB_TTTT_16_BITS 0x20
|
|
#define HUB_TTTT_24_BITS 0x40
|
|
#define HUB_TTTT_32_BITS 0x60
|
|
|
|
/*
|
|
* As of USB 2.0, full/low speed devices are segregated into trees.
|
|
* One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
|
|
* The other type grows from high speed hubs when they connect to
|
|
* full/low speed devices using "Transaction Translators" (TTs).
|
|
*
|
|
* TTs should only be known to the hub driver, and high speed bus
|
|
* drivers (only EHCI for now). They affect periodic scheduling and
|
|
* sometimes control/bulk error recovery.
|
|
*/
|
|
struct usb_tt {
|
|
struct usb_device *hub; /* upstream highspeed hub */
|
|
int multi; /* true means one TT per port */
|
|
unsigned think_time; /* think time in ns */
|
|
|
|
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
|
|
spinlock_t lock;
|
|
struct list_head clear_list; /* of usb_tt_clear */
|
|
struct work_struct clear_work;
|
|
};
|
|
|
|
struct usb_tt_clear {
|
|
struct list_head clear_list;
|
|
unsigned tt;
|
|
u16 devinfo;
|
|
struct usb_hcd *hcd;
|
|
struct usb_host_endpoint *ep;
|
|
};
|
|
|
|
extern int usb_hub_clear_tt_buffer(struct urb *urb);
|
|
extern void usb_ep0_reinit(struct usb_device *);
|
|
|
|
#endif /* __LINUX_HUB_H */
|