mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:47:19 +07:00
bae2c2d421
Currently, we detect whether the SMMU has coherent page table walk capability from the IDR0.CTTW field, and base our cache maintenance decisions on that. In preparation for fixing the bogus DMA API usage, however, we need to ensure that the DMA API agrees about this, which necessitates deferring to the dma-coherent property in the device tree for the final say. As an added bonus, since systems exist where an external CTTW signal has been tied off incorrectly at integration, allowing DT to override it offers a neat workaround for coherency issues with such SMMUs. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
78 lines
3.0 KiB
Plaintext
78 lines
3.0 KiB
Plaintext
* ARM System MMU Architecture Implementation
|
|
|
|
ARM SoCs may contain an implementation of the ARM System Memory
|
|
Management Unit Architecture, which can be used to provide 1 or 2 stages
|
|
of address translation to bus masters external to the CPU.
|
|
|
|
The SMMU may also raise interrupts in response to various fault
|
|
conditions.
|
|
|
|
** System MMU required properties:
|
|
|
|
- compatible : Should be one of:
|
|
|
|
"arm,smmu-v1"
|
|
"arm,smmu-v2"
|
|
"arm,mmu-400"
|
|
"arm,mmu-401"
|
|
"arm,mmu-500"
|
|
|
|
depending on the particular implementation and/or the
|
|
version of the architecture implemented.
|
|
|
|
- reg : Base address and size of the SMMU.
|
|
|
|
- #global-interrupts : The number of global interrupts exposed by the
|
|
device.
|
|
|
|
- interrupts : Interrupt list, with the first #global-irqs entries
|
|
corresponding to the global interrupts and any
|
|
following entries corresponding to context interrupts,
|
|
specified in order of their indexing by the SMMU.
|
|
|
|
For SMMUv2 implementations, there must be exactly one
|
|
interrupt per context bank. In the case of a single,
|
|
combined interrupt, it must be listed multiple times.
|
|
|
|
- mmu-masters : A list of phandles to device nodes representing bus
|
|
masters for which the SMMU can provide a translation
|
|
and their corresponding StreamIDs (see example below).
|
|
Each device node linked from this list must have a
|
|
"#stream-id-cells" property, indicating the number of
|
|
StreamIDs associated with it.
|
|
|
|
** System MMU optional properties:
|
|
|
|
- dma-coherent : Present if page table walks made by the SMMU are
|
|
cache coherent with the CPU.
|
|
|
|
NOTE: this only applies to the SMMU itself, not
|
|
masters connected upstream of the SMMU.
|
|
|
|
- calxeda,smmu-secure-config-access : Enable proper handling of buggy
|
|
implementations that always use secure access to
|
|
SMMU configuration registers. In this case non-secure
|
|
aliases of secure registers have to be used during
|
|
SMMU configuration.
|
|
|
|
Example:
|
|
|
|
smmu {
|
|
compatible = "arm,smmu-v1";
|
|
reg = <0xba5e0000 0x10000>;
|
|
#global-interrupts = <2>;
|
|
interrupts = <0 32 4>,
|
|
<0 33 4>,
|
|
<0 34 4>, /* This is the first context interrupt */
|
|
<0 35 4>,
|
|
<0 36 4>,
|
|
<0 37 4>;
|
|
|
|
/*
|
|
* Two DMA controllers, the first with two StreamIDs (0xd01d
|
|
* and 0xd01e) and the second with only one (0xd11c).
|
|
*/
|
|
mmu-masters = <&dma0 0xd01d 0xd01e>,
|
|
<&dma1 0xd11c>;
|
|
};
|