linux_dsm_epyc7002/drivers/pinctrl/qcom/pinctrl-msm.c
Linus Torvalds cf0c97f148 This is the bulk of pin control changes for the v5.8
kernel cycle.
 
 New drivers:
 
 - Intel Jasper Lake support.
 
 - NXP Freescale i.MX8DXL support.
 
 - Qualcomm SM8250 support.
 
 - Renesas R8A7742 SH-PFC support.
 
 Driver improvements:
 
 - Severe cleanup and modernization of the MCP23s08 driver.
 
 - Mediatek driver modularized.
 
 - Setting config supported in the Meson driver.
 
 - Wakeup support for the Broadcom BCM7211.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7dZC4ACgkQQRCzN7AZ
 XXOEZg/9F4dCwXmMxMxbS1c7DSHxsJTEHYKDDgAZ0L36N2DHihpMGbVQFzEe9khK
 xeSS8M4ecACYzw3FJGESaEC+fmTZ7zxr60SR++iyJJptooKAmcA00d2M/4VQ4ggN
 P/nXFEsGJvQ7nNJSO95wXr5K8aVkQW7rjo1cnblXH0c9dYOp+ItyodIytKcdWeZ9
 QfWSovYd+Oqra0braxx+pM/iTFVf6eOoCFZ8gkXB35pORsZ4Vl/e8pXMHXc3wUUm
 S1b6e3fifLiEGANvCEXz47/f3lUmUY26FsCSCAt92tHChq/p6coIKKvKyP4723PF
 R2L03iO8jMfsX+HwL2ivblSZ/lFExEgalWET56aogZClRQVynC0NMOnDEdluYGaT
 XJZPib9sRqQOF36+G9Bcy4zlqjj1LoHwqpiCdAhtj3AACTKdoLjDK0sJ3Wn5E8lJ
 QfIb+oqOmOGNHN/fdSsxsNM1ptOqNb/sW2Gk4O+X9tYzG17m16oZEVkrv4FNhmeC
 mePl/7aX+aMoHkEYxvt9tF3kRDFbndcuHdNFtRxq0Tx9jELiR91ySjjs9bUr2Vnl
 kkihtfIMZngQjBgHe2PNlcF2t7gSIgSBVEvwxslcUlx3XvVEDP16RKJV52aL80uu
 ev4k0h72CTxI1lZuNuW4cJYDKF/wJPqPtQ8+GQfOZxG7yuM8tOc=
 =3UGk
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.8 kernel cycle.

  It's just really boring this time. Zero core changes. Just linear
  development, cleanups and misc noncritical fixes. Some new drivers for
  very new Qualcomm and Intel chips.

  New drivers:

   - Intel Jasper Lake support.

   - NXP Freescale i.MX8DXL support.

   - Qualcomm SM8250 support.

   - Renesas R8A7742 SH-PFC support.

  Driver improvements:

   - Severe cleanup and modernization of the MCP23s08 driver.

   - Mediatek driver modularized.

   - Setting config supported in the Meson driver.

   - Wakeup support for the Broadcom BCM7211"

* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: sprd: Fix the incorrect pull-up definition
  pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
  pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
  pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
  pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
  pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
  pinctrl: bcm2835: Add support for wake-up interrupts
  pinctrl: bcm2835: Match BCM7211 compatible string
  dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
  dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
  dt-bindings: pinctrl: stm32: Add missing interrupts property
  pinctrl: at91-pio4: Add COMPILE_TEST support
  pinctrl: Fix return value about devm_platform_ioremap_resource()
  MAINTAINERS: Renesas Pin Controllers are supported
  dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
  pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
  pinctrl: ocelot: Remove instance number from pin functions
  pinctrl: ocelot: Always register GPIO driver
  dt-bindings: pinctrl: rockchip: update example
  pinctrl: amd: Add ACPI dependency
  ...
2020-06-07 16:13:43 -07:00

1358 lines
34 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013, Sony Mobile Communications AB.
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/reboot.h>
#include <linux/pm.h>
#include <linux/log2.h>
#include <linux/qcom_scm.h>
#include <linux/soc/qcom/irq.h>
#include "../core.h"
#include "../pinconf.h"
#include "pinctrl-msm.h"
#include "../pinctrl-utils.h"
#define MAX_NR_GPIO 300
#define MAX_NR_TILES 4
#define PS_HOLD_OFFSET 0x820
/**
* struct msm_pinctrl - state for a pinctrl-msm device
* @dev: device handle.
* @pctrl: pinctrl handle.
* @chip: gpiochip handle.
* @restart_nb: restart notifier block.
* @irq: parent irq for the TLMM irq_chip.
* @lock: Spinlock to protect register resources as well
* as msm_pinctrl data structures.
* @enabled_irqs: Bitmap of currently enabled irqs.
* @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
* detection.
* @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller
* @soc; Reference to soc_data of platform specific data.
* @regs: Base addresses for the TLMM tiles.
*/
struct msm_pinctrl {
struct device *dev;
struct pinctrl_dev *pctrl;
struct gpio_chip chip;
struct pinctrl_desc desc;
struct notifier_block restart_nb;
struct irq_chip irq_chip;
int irq;
bool intr_target_use_scm;
raw_spinlock_t lock;
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO);
const struct msm_pinctrl_soc_data *soc;
void __iomem *regs[MAX_NR_TILES];
u32 phys_base[MAX_NR_TILES];
};
#define MSM_ACCESSOR(name) \
static u32 msm_readl_##name(struct msm_pinctrl *pctrl, \
const struct msm_pingroup *g) \
{ \
return readl(pctrl->regs[g->tile] + g->name##_reg); \
} \
static void msm_writel_##name(u32 val, struct msm_pinctrl *pctrl, \
const struct msm_pingroup *g) \
{ \
writel(val, pctrl->regs[g->tile] + g->name##_reg); \
}
MSM_ACCESSOR(ctl)
MSM_ACCESSOR(io)
MSM_ACCESSOR(intr_cfg)
MSM_ACCESSOR(intr_status)
MSM_ACCESSOR(intr_target)
static int msm_get_groups_count(struct pinctrl_dev *pctldev)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->soc->ngroups;
}
static const char *msm_get_group_name(struct pinctrl_dev *pctldev,
unsigned group)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->soc->groups[group].name;
}
static int msm_get_group_pins(struct pinctrl_dev *pctldev,
unsigned group,
const unsigned **pins,
unsigned *num_pins)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
*pins = pctrl->soc->groups[group].pins;
*num_pins = pctrl->soc->groups[group].npins;
return 0;
}
static const struct pinctrl_ops msm_pinctrl_ops = {
.get_groups_count = msm_get_groups_count,
.get_group_name = msm_get_group_name,
.get_group_pins = msm_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
.dt_free_map = pinctrl_utils_free_map,
};
static int msm_pinmux_request(struct pinctrl_dev *pctldev, unsigned offset)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
struct gpio_chip *chip = &pctrl->chip;
return gpiochip_line_is_valid(chip, offset) ? 0 : -EINVAL;
}
static int msm_get_functions_count(struct pinctrl_dev *pctldev)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->soc->nfunctions;
}
static const char *msm_get_function_name(struct pinctrl_dev *pctldev,
unsigned function)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->soc->functions[function].name;
}
static int msm_get_function_groups(struct pinctrl_dev *pctldev,
unsigned function,
const char * const **groups,
unsigned * const num_groups)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
*groups = pctrl->soc->functions[function].groups;
*num_groups = pctrl->soc->functions[function].ngroups;
return 0;
}
static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned function,
unsigned group)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
const struct msm_pingroup *g;
unsigned long flags;
u32 val, mask;
int i;
g = &pctrl->soc->groups[group];
mask = GENMASK(g->mux_bit + order_base_2(g->nfuncs) - 1, g->mux_bit);
for (i = 0; i < g->nfuncs; i++) {
if (g->funcs[i] == function)
break;
}
if (WARN_ON(i == g->nfuncs))
return -EINVAL;
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_ctl(pctrl, g);
val &= ~mask;
val |= i << g->mux_bit;
msm_writel_ctl(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0;
}
static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
const struct msm_pingroup *g = &pctrl->soc->groups[offset];
/* No funcs? Probably ACPI so can't do anything here */
if (!g->nfuncs)
return 0;
/* For now assume function 0 is GPIO because it always is */
return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
}
static const struct pinmux_ops msm_pinmux_ops = {
.request = msm_pinmux_request,
.get_functions_count = msm_get_functions_count,
.get_function_name = msm_get_function_name,
.get_function_groups = msm_get_function_groups,
.gpio_request_enable = msm_pinmux_request_gpio,
.set_mux = msm_pinmux_set_mux,
};
static int msm_config_reg(struct msm_pinctrl *pctrl,
const struct msm_pingroup *g,
unsigned param,
unsigned *mask,
unsigned *bit)
{
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_BUS_HOLD:
case PIN_CONFIG_BIAS_PULL_UP:
*bit = g->pull_bit;
*mask = 3;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
*bit = g->drv_bit;
*mask = 7;
break;
case PIN_CONFIG_OUTPUT:
case PIN_CONFIG_INPUT_ENABLE:
*bit = g->oe_bit;
*mask = 1;
break;
default:
return -ENOTSUPP;
}
return 0;
}
#define MSM_NO_PULL 0
#define MSM_PULL_DOWN 1
#define MSM_KEEPER 2
#define MSM_PULL_UP_NO_KEEPER 2
#define MSM_PULL_UP 3
static unsigned msm_regval_to_drive(u32 val)
{
return (val + 1) * 2;
}
static int msm_config_group_get(struct pinctrl_dev *pctldev,
unsigned int group,
unsigned long *config)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
unsigned param = pinconf_to_config_param(*config);
unsigned mask;
unsigned arg;
unsigned bit;
int ret;
u32 val;
g = &pctrl->soc->groups[group];
ret = msm_config_reg(pctrl, g, param, &mask, &bit);
if (ret < 0)
return ret;
val = msm_readl_ctl(pctrl, g);
arg = (val >> bit) & mask;
/* Convert register value to pinconf value */
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
if (arg != MSM_NO_PULL)
return -EINVAL;
arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
if (arg != MSM_PULL_DOWN)
return -EINVAL;
arg = 1;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
if (pctrl->soc->pull_no_keeper)
return -ENOTSUPP;
if (arg != MSM_KEEPER)
return -EINVAL;
arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (pctrl->soc->pull_no_keeper)
arg = arg == MSM_PULL_UP_NO_KEEPER;
else
arg = arg == MSM_PULL_UP;
if (!arg)
return -EINVAL;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive(arg);
break;
case PIN_CONFIG_OUTPUT:
/* Pin is not output */
if (!arg)
return -EINVAL;
val = msm_readl_io(pctrl, g);
arg = !!(val & BIT(g->in_bit));
break;
case PIN_CONFIG_INPUT_ENABLE:
/* Pin is output */
if (arg)
return -EINVAL;
arg = 1;
break;
default:
return -ENOTSUPP;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static int msm_config_group_set(struct pinctrl_dev *pctldev,
unsigned group,
unsigned long *configs,
unsigned num_configs)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
unsigned long flags;
unsigned param;
unsigned mask;
unsigned arg;
unsigned bit;
int ret;
u32 val;
int i;
g = &pctrl->soc->groups[group];
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
ret = msm_config_reg(pctrl, g, param, &mask, &bit);
if (ret < 0)
return ret;
/* Convert pinconf values to register values */
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
arg = MSM_NO_PULL;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
arg = MSM_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
if (pctrl->soc->pull_no_keeper)
return -ENOTSUPP;
arg = MSM_KEEPER;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (pctrl->soc->pull_no_keeper)
arg = MSM_PULL_UP_NO_KEEPER;
else
arg = MSM_PULL_UP;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
/* Check for invalid values */
if (arg > 16 || arg < 2 || (arg % 2) != 0)
arg = -1;
else
arg = (arg / 2) - 1;
break;
case PIN_CONFIG_OUTPUT:
/* set output value */
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_io(pctrl, g);
if (arg)
val |= BIT(g->out_bit);
else
val &= ~BIT(g->out_bit);
msm_writel_io(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
/* enable output */
arg = 1;
break;
case PIN_CONFIG_INPUT_ENABLE:
/* disable output */
arg = 0;
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);
return -EINVAL;
}
/* Range-check user-supplied value */
if (arg & ~mask) {
dev_err(pctrl->dev, "config %x: %x is invalid\n", param, arg);
return -EINVAL;
}
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_ctl(pctrl, g);
val &= ~(mask << bit);
val |= arg << bit;
msm_writel_ctl(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
return 0;
}
static const struct pinconf_ops msm_pinconf_ops = {
.is_generic = true,
.pin_config_group_get = msm_config_group_get,
.pin_config_group_set = msm_config_group_set,
};
static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned long flags;
u32 val;
g = &pctrl->soc->groups[offset];
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_ctl(pctrl, g);
val &= ~BIT(g->oe_bit);
msm_writel_ctl(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0;
}
static int msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned long flags;
u32 val;
g = &pctrl->soc->groups[offset];
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_io(pctrl, g);
if (value)
val |= BIT(g->out_bit);
else
val &= ~BIT(g->out_bit);
msm_writel_io(val, pctrl, g);
val = msm_readl_ctl(pctrl, g);
val |= BIT(g->oe_bit);
msm_writel_ctl(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0;
}
static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
{
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
const struct msm_pingroup *g;
u32 val;
g = &pctrl->soc->groups[offset];
val = msm_readl_ctl(pctrl, g);
return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
GPIO_LINE_DIRECTION_IN;
}
static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
u32 val;
g = &pctrl->soc->groups[offset];
val = msm_readl_io(pctrl, g);
return !!(val & BIT(g->in_bit));
}
static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned long flags;
u32 val;
g = &pctrl->soc->groups[offset];
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_io(pctrl, g);
if (value)
val |= BIT(g->out_bit);
else
val &= ~BIT(g->out_bit);
msm_writel_io(val, pctrl, g);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/seq_file.h>
static void msm_gpio_dbg_show_one(struct seq_file *s,
struct pinctrl_dev *pctldev,
struct gpio_chip *chip,
unsigned offset,
unsigned gpio)
{
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned func;
int is_out;
int drive;
int pull;
int val;
u32 ctl_reg, io_reg;
static const char * const pulls_keeper[] = {
"no pull",
"pull down",
"keeper",
"pull up"
};
static const char * const pulls_no_keeper[] = {
"no pull",
"pull down",
"pull up",
};
if (!gpiochip_line_is_valid(chip, offset))
return;
g = &pctrl->soc->groups[offset];
ctl_reg = msm_readl_ctl(pctrl, g);
io_reg = msm_readl_io(pctrl, g);
is_out = !!(ctl_reg & BIT(g->oe_bit));
func = (ctl_reg >> g->mux_bit) & 7;
drive = (ctl_reg >> g->drv_bit) & 7;
pull = (ctl_reg >> g->pull_bit) & 3;
if (is_out)
val = !!(io_reg & BIT(g->out_bit));
else
val = !!(io_reg & BIT(g->in_bit));
seq_printf(s, " %-8s: %-3s", g->name, is_out ? "out" : "in");
seq_printf(s, " %-4s func%d", val ? "high" : "low", func);
seq_printf(s, " %dmA", msm_regval_to_drive(drive));
if (pctrl->soc->pull_no_keeper)
seq_printf(s, " %s", pulls_no_keeper[pull]);
else
seq_printf(s, " %s", pulls_keeper[pull]);
seq_puts(s, "\n");
}
static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
unsigned gpio = chip->base;
unsigned i;
for (i = 0; i < chip->ngpio; i++, gpio++)
msm_gpio_dbg_show_one(s, NULL, chip, i, gpio);
}
#else
#define msm_gpio_dbg_show NULL
#endif
static int msm_gpio_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
int ret;
unsigned int len, i;
const int *reserved = pctrl->soc->reserved_gpios;
u16 *tmp;
/* Driver provided reserved list overrides DT and ACPI */
if (reserved) {
bitmap_fill(valid_mask, ngpios);
for (i = 0; reserved[i] >= 0; i++) {
if (i >= ngpios || reserved[i] >= ngpios) {
dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
return -EINVAL;
}
clear_bit(reserved[i], valid_mask);
}
return 0;
}
/* The number of GPIOs in the ACPI tables */
len = ret = device_property_count_u16(pctrl->dev, "gpios");
if (ret < 0)
return 0;
if (ret > ngpios)
return -EINVAL;
tmp = kmalloc_array(len, sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
ret = device_property_read_u16_array(pctrl->dev, "gpios", tmp, len);
if (ret < 0) {
dev_err(pctrl->dev, "could not read list of GPIOs\n");
goto out;
}
bitmap_zero(valid_mask, ngpios);
for (i = 0; i < len; i++)
set_bit(tmp[i], valid_mask);
out:
kfree(tmp);
return ret;
}
static const struct gpio_chip msm_gpio_template = {
.direction_input = msm_gpio_direction_input,
.direction_output = msm_gpio_direction_output,
.get_direction = msm_gpio_get_direction,
.get = msm_gpio_get,
.set = msm_gpio_set,
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.dbg_show = msm_gpio_dbg_show,
};
/* For dual-edge interrupts in software, since some hardware has no
* such support:
*
* At appropriate moments, this function may be called to flip the polarity
* settings of both-edge irq lines to try and catch the next edge.
*
* The attempt is considered successful if:
* - the status bit goes high, indicating that an edge was caught, or
* - the input value of the gpio doesn't change during the attempt.
* If the value changes twice during the process, that would cause the first
* test to fail but would force the second, as two opposite
* transitions would cause a detection no matter the polarity setting.
*
* The do-loop tries to sledge-hammer closed the timing hole between
* the initial value-read and the polarity-write - if the line value changes
* during that window, an interrupt is lost, the new polarity setting is
* incorrect, and the first success test will fail, causing a retry.
*
* Algorithm comes from Google's msmgpio driver.
*/
static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
const struct msm_pingroup *g,
struct irq_data *d)
{
int loop_limit = 100;
unsigned val, val2, intstat;
unsigned pol;
do {
val = msm_readl_io(pctrl, g) & BIT(g->in_bit);
pol = msm_readl_intr_cfg(pctrl, g);
pol ^= BIT(g->intr_polarity_bit);
msm_writel_intr_cfg(pol, pctrl, g);
val2 = msm_readl_io(pctrl, g) & BIT(g->in_bit);
intstat = msm_readl_intr_status(pctrl, g);
if (intstat || (val == val2))
return;
} while (loop_limit-- > 0);
dev_err(pctrl->dev, "dual-edge irq failed to stabilize, %#08x != %#08x\n",
val, val2);
}
static void msm_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
if (d->parent_data)
irq_chip_mask_parent(d);
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
return;
g = &pctrl->soc->groups[d->hwirq];
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_intr_cfg(pctrl, g);
/*
* There are two bits that control interrupt forwarding to the CPU. The
* RAW_STATUS_EN bit causes the level or edge sensed on the line to be
* latched into the interrupt status register when the hardware detects
* an irq that it's configured for (either edge for edge type or level
* for level type irq). The 'non-raw' status enable bit causes the
* hardware to assert the summary interrupt to the CPU if the latched
* status bit is set. There's a bug though, the edge detection logic
* seems to have a problem where toggling the RAW_STATUS_EN bit may
* cause the status bit to latch spuriously when there isn't any edge
* so we can't touch that bit for edge type irqs and we have to keep
* the bit set anyway so that edges are latched while the line is masked.
*
* To make matters more complicated, leaving the RAW_STATUS_EN bit
* enabled all the time causes level interrupts to re-latch into the
* status register because the level is still present on the line after
* we ack it. We clear the raw status enable bit during mask here and
* set the bit on unmask so the interrupt can't latch into the hardware
* while it's masked.
*/
if (irqd_get_trigger_type(d) & IRQ_TYPE_LEVEL_MASK)
val &= ~BIT(g->intr_raw_status_bit);
val &= ~BIT(g->intr_enable_bit);
msm_writel_intr_cfg(val, pctrl, g);
clear_bit(d->hwirq, pctrl->enabled_irqs);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
if (d->parent_data)
irq_chip_unmask_parent(d);
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
return;
g = &pctrl->soc->groups[d->hwirq];
raw_spin_lock_irqsave(&pctrl->lock, flags);
if (status_clear) {
/*
* clear the interrupt status bit before unmask to avoid
* any erroneous interrupts that would have got latched
* when the interrupt is not in use.
*/
val = msm_readl_intr_status(pctrl, g);
val &= ~BIT(g->intr_status_bit);
msm_writel_intr_status(val, pctrl, g);
}
val = msm_readl_intr_cfg(pctrl, g);
val |= BIT(g->intr_raw_status_bit);
val |= BIT(g->intr_enable_bit);
msm_writel_intr_cfg(val, pctrl, g);
set_bit(d->hwirq, pctrl->enabled_irqs);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
static void msm_gpio_irq_enable(struct irq_data *d)
{
/*
* Clear the interrupt that may be pending before we enable
* the line.
* This is especially a problem with the GPIOs routed to the
* PDC. These GPIOs are direct-connect interrupts to the GIC.
* Disabling the interrupt line at the PDC does not prevent
* the interrupt from being latched at the GIC. The state at
* GIC needs to be cleared before enabling.
*/
if (d->parent_data) {
irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, 0);
irq_chip_enable_parent(d);
}
msm_gpio_irq_clear_unmask(d, true);
}
static void msm_gpio_irq_disable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
if (d->parent_data)
irq_chip_disable_parent(d);
if (!test_bit(d->hwirq, pctrl->skip_wake_irqs))
msm_gpio_irq_mask(d);
}
static void msm_gpio_irq_unmask(struct irq_data *d)
{
msm_gpio_irq_clear_unmask(d, false);
}
static void msm_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
return;
g = &pctrl->soc->groups[d->hwirq];
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_intr_status(pctrl, g);
if (g->intr_ack_high)
val |= BIT(g->intr_status_bit);
else
val &= ~BIT(g->intr_status_bit);
msm_writel_intr_status(val, pctrl, g);
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
msm_gpio_update_dual_edge_pos(pctrl, g, d);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
if (d->parent_data)
irq_chip_set_type_parent(d, type);
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
return 0;
g = &pctrl->soc->groups[d->hwirq];
raw_spin_lock_irqsave(&pctrl->lock, flags);
/*
* For hw without possibility of detecting both edges
*/
if (g->intr_detection_width == 1 && type == IRQ_TYPE_EDGE_BOTH)
set_bit(d->hwirq, pctrl->dual_edge_irqs);
else
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
/* Route interrupts to application cpu.
* With intr_target_use_scm interrupts are routed to
* application cpu using scm calls.
*/
if (pctrl->intr_target_use_scm) {
u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
int ret;
qcom_scm_io_readl(addr, &val);
val &= ~(7 << g->intr_target_bit);
val |= g->intr_target_kpss_val << g->intr_target_bit;
ret = qcom_scm_io_writel(addr, val);
if (ret)
dev_err(pctrl->dev,
"Failed routing %lu interrupt to Apps proc",
d->hwirq);
} else {
val = msm_readl_intr_target(pctrl, g);
val &= ~(7 << g->intr_target_bit);
val |= g->intr_target_kpss_val << g->intr_target_bit;
msm_writel_intr_target(val, pctrl, g);
}
/* Update configuration for gpio.
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
* internal circuitry of TLMM, toggling the RAW_STATUS
* could cause the INTR_STATUS to be set for EDGE interrupts.
*/
val = msm_readl_intr_cfg(pctrl, g);
val |= BIT(g->intr_raw_status_bit);
if (g->intr_detection_width == 2) {
val &= ~(3 << g->intr_detection_bit);
val &= ~(1 << g->intr_polarity_bit);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
val |= 1 << g->intr_detection_bit;
val |= BIT(g->intr_polarity_bit);
break;
case IRQ_TYPE_EDGE_FALLING:
val |= 2 << g->intr_detection_bit;
val |= BIT(g->intr_polarity_bit);
break;
case IRQ_TYPE_EDGE_BOTH:
val |= 3 << g->intr_detection_bit;
val |= BIT(g->intr_polarity_bit);
break;
case IRQ_TYPE_LEVEL_LOW:
break;
case IRQ_TYPE_LEVEL_HIGH:
val |= BIT(g->intr_polarity_bit);
break;
}
} else if (g->intr_detection_width == 1) {
val &= ~(1 << g->intr_detection_bit);
val &= ~(1 << g->intr_polarity_bit);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
val |= BIT(g->intr_detection_bit);
val |= BIT(g->intr_polarity_bit);
break;
case IRQ_TYPE_EDGE_FALLING:
val |= BIT(g->intr_detection_bit);
break;
case IRQ_TYPE_EDGE_BOTH:
val |= BIT(g->intr_detection_bit);
val |= BIT(g->intr_polarity_bit);
break;
case IRQ_TYPE_LEVEL_LOW:
break;
case IRQ_TYPE_LEVEL_HIGH:
val |= BIT(g->intr_polarity_bit);
break;
}
} else {
BUG();
}
msm_writel_intr_cfg(val, pctrl, g);
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
msm_gpio_update_dual_edge_pos(pctrl, g, d);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
irq_set_handler_locked(d, handle_level_irq);
else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
irq_set_handler_locked(d, handle_edge_irq);
return 0;
}
static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
/*
* While they may not wake up when the TLMM is powered off,
* some GPIOs would like to wakeup the system from suspend
* when TLMM is powered on. To allow that, enable the GPIO
* summary line to be wakeup capable at GIC.
*/
if (d->parent_data)
irq_chip_set_wake_parent(d, on);
irq_set_irq_wake(pctrl->irq, on);
return 0;
}
static int msm_gpio_irq_reqres(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
int ret;
if (!try_module_get(gc->owner))
return -ENODEV;
ret = msm_pinmux_request_gpio(pctrl->pctrl, NULL, d->hwirq);
if (ret)
goto out;
msm_gpio_direction_input(gc, d->hwirq);
if (gpiochip_lock_as_irq(gc, d->hwirq)) {
dev_err(gc->parent,
"unable to lock HW IRQ %lu for IRQ\n",
d->hwirq);
ret = -EINVAL;
goto out;
}
return 0;
out:
module_put(gc->owner);
return ret;
}
static void msm_gpio_irq_relres(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpiochip_unlock_as_irq(gc, d->hwirq);
module_put(gc->owner);
}
static int msm_gpio_irq_set_affinity(struct irq_data *d,
const struct cpumask *dest, bool force)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
return irq_chip_set_affinity_parent(d, dest, force);
return 0;
}
static int msm_gpio_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
return irq_chip_set_vcpu_affinity_parent(d, vcpu_info);
return 0;
}
static void msm_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
const struct msm_pingroup *g;
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
struct irq_chip *chip = irq_desc_get_chip(desc);
int irq_pin;
int handled = 0;
u32 val;
int i;
chained_irq_enter(chip, desc);
/*
* Each pin has it's own IRQ status register, so use
* enabled_irq bitmap to limit the number of reads.
*/
for_each_set_bit(i, pctrl->enabled_irqs, pctrl->chip.ngpio) {
g = &pctrl->soc->groups[i];
val = msm_readl_intr_status(pctrl, g);
if (val & BIT(g->intr_status_bit)) {
irq_pin = irq_find_mapping(gc->irq.domain, i);
generic_handle_irq(irq_pin);
handled++;
}
}
/* No interrupts were flagged */
if (handled == 0)
handle_bad_irq(desc);
chained_irq_exit(chip, desc);
}
static int msm_gpio_wakeirq(struct gpio_chip *gc,
unsigned int child,
unsigned int child_type,
unsigned int *parent,
unsigned int *parent_type)
{
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_gpio_wakeirq_map *map;
int i;
*parent = GPIO_NO_WAKE_IRQ;
*parent_type = IRQ_TYPE_EDGE_RISING;
for (i = 0; i < pctrl->soc->nwakeirq_map; i++) {
map = &pctrl->soc->wakeirq_map[i];
if (map->gpio == child) {
*parent = map->wakeirq;
break;
}
}
return 0;
}
static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
{
if (pctrl->soc->reserved_gpios)
return true;
return device_property_count_u16(pctrl->dev, "gpios") > 0;
}
static int msm_gpio_init(struct msm_pinctrl *pctrl)
{
struct gpio_chip *chip;
struct gpio_irq_chip *girq;
int i, ret;
unsigned gpio, ngpio = pctrl->soc->ngpios;
struct device_node *np;
bool skip;
if (WARN_ON(ngpio > MAX_NR_GPIO))
return -EINVAL;
chip = &pctrl->chip;
chip->base = -1;
chip->ngpio = ngpio;
chip->label = dev_name(pctrl->dev);
chip->parent = pctrl->dev;
chip->owner = THIS_MODULE;
chip->of_node = pctrl->dev->of_node;
if (msm_gpio_needs_valid_mask(pctrl))
chip->init_valid_mask = msm_gpio_init_valid_mask;
pctrl->irq_chip.name = "msmgpio";
pctrl->irq_chip.irq_enable = msm_gpio_irq_enable;
pctrl->irq_chip.irq_disable = msm_gpio_irq_disable;
pctrl->irq_chip.irq_mask = msm_gpio_irq_mask;
pctrl->irq_chip.irq_unmask = msm_gpio_irq_unmask;
pctrl->irq_chip.irq_ack = msm_gpio_irq_ack;
pctrl->irq_chip.irq_set_type = msm_gpio_irq_set_type;
pctrl->irq_chip.irq_set_wake = msm_gpio_irq_set_wake;
pctrl->irq_chip.irq_request_resources = msm_gpio_irq_reqres;
pctrl->irq_chip.irq_release_resources = msm_gpio_irq_relres;
pctrl->irq_chip.irq_set_affinity = msm_gpio_irq_set_affinity;
pctrl->irq_chip.irq_set_vcpu_affinity = msm_gpio_irq_set_vcpu_affinity;
np = of_parse_phandle(pctrl->dev->of_node, "wakeup-parent", 0);
if (np) {
chip->irq.parent_domain = irq_find_matching_host(np,
DOMAIN_BUS_WAKEUP);
of_node_put(np);
if (!chip->irq.parent_domain)
return -EPROBE_DEFER;
chip->irq.child_to_parent_hwirq = msm_gpio_wakeirq;
pctrl->irq_chip.irq_eoi = irq_chip_eoi_parent;
/*
* Let's skip handling the GPIOs, if the parent irqchip
* is handling the direct connect IRQ of the GPIO.
*/
skip = irq_domain_qcom_handle_wakeup(chip->irq.parent_domain);
for (i = 0; skip && i < pctrl->soc->nwakeirq_map; i++) {
gpio = pctrl->soc->wakeirq_map[i].gpio;
set_bit(gpio, pctrl->skip_wake_irqs);
}
}
girq = &chip->irq;
girq->chip = &pctrl->irq_chip;
girq->parent_handler = msm_gpio_irq_handler;
girq->fwnode = pctrl->dev->fwnode;
girq->num_parents = 1;
girq->parents = devm_kcalloc(pctrl->dev, 1, sizeof(*girq->parents),
GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
girq->parents[0] = pctrl->irq;
ret = gpiochip_add_data(&pctrl->chip, pctrl);
if (ret) {
dev_err(pctrl->dev, "Failed register gpiochip\n");
return ret;
}
/*
* For DeviceTree-supported systems, the gpio core checks the
* pinctrl's device node for the "gpio-ranges" property.
* If it is present, it takes care of adding the pin ranges
* for the driver. In this case the driver can skip ahead.
*
* In order to remain compatible with older, existing DeviceTree
* files which don't set the "gpio-ranges" property or systems that
* utilize ACPI the driver has to call gpiochip_add_pin_range().
*/
if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
ret = gpiochip_add_pin_range(&pctrl->chip,
dev_name(pctrl->dev), 0, 0, chip->ngpio);
if (ret) {
dev_err(pctrl->dev, "Failed to add pin range\n");
gpiochip_remove(&pctrl->chip);
return ret;
}
}
return 0;
}
static int msm_ps_hold_restart(struct notifier_block *nb, unsigned long action,
void *data)
{
struct msm_pinctrl *pctrl = container_of(nb, struct msm_pinctrl, restart_nb);
writel(0, pctrl->regs[0] + PS_HOLD_OFFSET);
mdelay(1000);
return NOTIFY_DONE;
}
static struct msm_pinctrl *poweroff_pctrl;
static void msm_ps_hold_poweroff(void)
{
msm_ps_hold_restart(&poweroff_pctrl->restart_nb, 0, NULL);
}
static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
{
int i;
const struct msm_function *func = pctrl->soc->functions;
for (i = 0; i < pctrl->soc->nfunctions; i++)
if (!strcmp(func[i].name, "ps_hold")) {
pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
pctrl->restart_nb.priority = 128;
if (register_restart_handler(&pctrl->restart_nb))
dev_err(pctrl->dev,
"failed to setup restart handler.\n");
poweroff_pctrl = pctrl;
pm_power_off = msm_ps_hold_poweroff;
break;
}
}
static __maybe_unused int msm_pinctrl_suspend(struct device *dev)
{
struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
return pinctrl_force_sleep(pctrl->pctrl);
}
static __maybe_unused int msm_pinctrl_resume(struct device *dev)
{
struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
return pinctrl_force_default(pctrl->pctrl);
}
SIMPLE_DEV_PM_OPS(msm_pinctrl_dev_pm_ops, msm_pinctrl_suspend,
msm_pinctrl_resume);
EXPORT_SYMBOL(msm_pinctrl_dev_pm_ops);
int msm_pinctrl_probe(struct platform_device *pdev,
const struct msm_pinctrl_soc_data *soc_data)
{
struct msm_pinctrl *pctrl;
struct resource *res;
int ret;
int i;
pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
return -ENOMEM;
pctrl->dev = &pdev->dev;
pctrl->soc = soc_data;
pctrl->chip = msm_gpio_template;
pctrl->intr_target_use_scm = of_device_is_compatible(
pctrl->dev->of_node,
"qcom,ipq8064-pinctrl");
raw_spin_lock_init(&pctrl->lock);
if (soc_data->tiles) {
for (i = 0; i < soc_data->ntiles; i++) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
soc_data->tiles[i]);
pctrl->regs[i] = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pctrl->regs[i]))
return PTR_ERR(pctrl->regs[i]);
}
} else {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pctrl->regs[0]))
return PTR_ERR(pctrl->regs[0]);
pctrl->phys_base[0] = res->start;
}
msm_pinctrl_setup_pm_reset(pctrl);
pctrl->irq = platform_get_irq(pdev, 0);
if (pctrl->irq < 0)
return pctrl->irq;
pctrl->desc.owner = THIS_MODULE;
pctrl->desc.pctlops = &msm_pinctrl_ops;
pctrl->desc.pmxops = &msm_pinmux_ops;
pctrl->desc.confops = &msm_pinconf_ops;
pctrl->desc.name = dev_name(&pdev->dev);
pctrl->desc.pins = pctrl->soc->pins;
pctrl->desc.npins = pctrl->soc->npins;
pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl);
if (IS_ERR(pctrl->pctrl)) {
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
return PTR_ERR(pctrl->pctrl);
}
ret = msm_gpio_init(pctrl);
if (ret)
return ret;
platform_set_drvdata(pdev, pctrl);
dev_dbg(&pdev->dev, "Probed Qualcomm pinctrl driver\n");
return 0;
}
EXPORT_SYMBOL(msm_pinctrl_probe);
int msm_pinctrl_remove(struct platform_device *pdev)
{
struct msm_pinctrl *pctrl = platform_get_drvdata(pdev);
gpiochip_remove(&pctrl->chip);
unregister_restart_handler(&pctrl->restart_nb);
return 0;
}
EXPORT_SYMBOL(msm_pinctrl_remove);