mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 06:06:39 +07:00
c50f2af8e1
qt2_open() and qt2_close() both set a serial_priv variable but never used it. Remove the variable from the functions. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1152 lines
28 KiB
C
1152 lines
28 KiB
C
/*
|
|
* usb-serial driver for Quatech USB 2 devices
|
|
*
|
|
* Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation.
|
|
*
|
|
*
|
|
* These devices all have only 1 bulk in and 1 bulk out that is shared
|
|
* for all serial ports.
|
|
*
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
static bool debug;
|
|
|
|
/* default urb timeout for usb operations */
|
|
#define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT
|
|
|
|
#define QT_OPEN_CLOSE_CHANNEL 0xca
|
|
#define QT_SET_GET_DEVICE 0xc2
|
|
#define QT_SET_GET_REGISTER 0xc0
|
|
#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
|
|
#define QT_SET_ATF 0xcd
|
|
#define QT_TRANSFER_IN 0xc0
|
|
#define QT_HW_FLOW_CONTROL_MASK 0xc5
|
|
#define QT_SW_FLOW_CONTROL_MASK 0xc6
|
|
#define QT2_BREAK_CONTROL 0xc8
|
|
#define QT2_GET_SET_UART 0xc1
|
|
#define QT2_FLUSH_DEVICE 0xc4
|
|
#define QT2_GET_SET_QMCR 0xe1
|
|
#define QT2_QMCR_RS232 0x40
|
|
#define QT2_QMCR_RS422 0x10
|
|
|
|
#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
|
|
|
|
#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR)
|
|
|
|
/* status bytes for the device */
|
|
#define QT2_CONTROL_BYTE 0x1b
|
|
#define QT2_LINE_STATUS 0x00 /* following 1 byte is line status */
|
|
#define QT2_MODEM_STATUS 0x01 /* following 1 byte is modem status */
|
|
#define QT2_XMIT_HOLD 0x02 /* following 2 bytes are ?? */
|
|
#define QT2_CHANGE_PORT 0x03 /* following 1 byte is port to change to */
|
|
#define QT2_REC_FLUSH 0x04 /* no following info */
|
|
#define QT2_XMIT_FLUSH 0x05 /* no following info */
|
|
#define QT2_CONTROL_ESCAPE 0xff /* pass through previous 2 control bytes */
|
|
|
|
#define MAX_BAUD_RATE 921600
|
|
#define DEFAULT_BAUD_RATE 9600
|
|
|
|
#define QT2_WRITE_BUFFER_SIZE 512 /* size of write buffer */
|
|
#define QT2_WRITE_CONTROL_SIZE 5 /* control bytes used for a write */
|
|
|
|
/* Version Information */
|
|
#define DRIVER_VERSION "v0.1"
|
|
#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
|
|
|
|
#define USB_VENDOR_ID_QUATECH 0x061d
|
|
#define QUATECH_SSU2_100 0xC120 /* RS232 single port */
|
|
#define QUATECH_DSU2_100 0xC140 /* RS232 dual port */
|
|
#define QUATECH_DSU2_400 0xC150 /* RS232/422/485 dual port */
|
|
#define QUATECH_QSU2_100 0xC160 /* RS232 four port */
|
|
#define QUATECH_QSU2_400 0xC170 /* RS232/422/485 four port */
|
|
#define QUATECH_ESU2_100 0xC1A0 /* RS232 eight port */
|
|
#define QUATECH_ESU2_400 0xC180 /* RS232/422/485 eight port */
|
|
|
|
struct qt2_device_detail {
|
|
int product_id;
|
|
int num_ports;
|
|
};
|
|
|
|
#define QT_DETAILS(prod, ports) \
|
|
.product_id = (prod), \
|
|
.num_ports = (ports)
|
|
|
|
static const struct qt2_device_detail qt2_device_details[] = {
|
|
{QT_DETAILS(QUATECH_SSU2_100, 1)},
|
|
{QT_DETAILS(QUATECH_DSU2_400, 2)},
|
|
{QT_DETAILS(QUATECH_DSU2_100, 2)},
|
|
{QT_DETAILS(QUATECH_QSU2_400, 4)},
|
|
{QT_DETAILS(QUATECH_QSU2_100, 4)},
|
|
{QT_DETAILS(QUATECH_ESU2_400, 8)},
|
|
{QT_DETAILS(QUATECH_ESU2_100, 8)},
|
|
{QT_DETAILS(0, 0)} /* Terminating entry */
|
|
};
|
|
|
|
static const struct usb_device_id id_table[] = {
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
|
|
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
|
|
{} /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
struct qt2_serial_private {
|
|
unsigned char current_port; /* current port for incoming data */
|
|
|
|
struct urb *read_urb; /* shared among all ports */
|
|
char read_buffer[512];
|
|
};
|
|
|
|
struct qt2_port_private {
|
|
bool is_open;
|
|
u8 device_port;
|
|
|
|
spinlock_t urb_lock;
|
|
bool urb_in_use;
|
|
struct urb *write_urb;
|
|
char write_buffer[QT2_WRITE_BUFFER_SIZE];
|
|
|
|
spinlock_t lock;
|
|
u8 shadowLSR;
|
|
u8 shadowMSR;
|
|
|
|
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
|
|
struct async_icount icount;
|
|
|
|
struct usb_serial_port *port;
|
|
};
|
|
|
|
static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch);
|
|
static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch);
|
|
static void qt2_write_bulk_callback(struct urb *urb);
|
|
static void qt2_read_bulk_callback(struct urb *urb);
|
|
|
|
static void qt2_release(struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
|
|
kfree(usb_get_serial_data(serial));
|
|
|
|
for (i = 0; i < serial->num_ports; i++)
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
}
|
|
|
|
static inline int calc_baud_divisor(int baudrate)
|
|
{
|
|
int divisor, rem;
|
|
|
|
divisor = MAX_BAUD_RATE / baudrate;
|
|
rem = MAX_BAUD_RATE % baudrate;
|
|
/* Round to nearest divisor */
|
|
if (((rem * 2) >= baudrate) && (baudrate != 110))
|
|
divisor++;
|
|
|
|
return divisor;
|
|
}
|
|
|
|
static inline int qt2_set_port_config(struct usb_device *dev,
|
|
unsigned char port_number,
|
|
u16 baudrate, u16 lcr)
|
|
{
|
|
int divisor = calc_baud_divisor(baudrate);
|
|
u16 index = ((u16) (lcr << 8) | (u16) (port_number));
|
|
|
|
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
QT2_GET_SET_UART, 0x40,
|
|
divisor, index, NULL, 0, QT2_USB_TIMEOUT);
|
|
}
|
|
|
|
static inline int qt2_control_msg(struct usb_device *dev,
|
|
u8 request, u16 data, u16 index)
|
|
{
|
|
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
request, 0x40, data, index,
|
|
NULL, 0, QT2_USB_TIMEOUT);
|
|
}
|
|
|
|
static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
|
|
{
|
|
u16 x = ((u16) (data[1] << 8) | (u16) (data[0]));
|
|
|
|
return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
|
|
}
|
|
|
|
|
|
static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
|
|
{
|
|
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
QT_SET_GET_DEVICE, 0xc0, 0, 0,
|
|
data, 3, QT2_USB_TIMEOUT);
|
|
}
|
|
|
|
static inline int qt2_getregister(struct usb_device *dev,
|
|
u8 uart,
|
|
u8 reg,
|
|
u8 *data)
|
|
{
|
|
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
QT_SET_GET_REGISTER, 0xc0, reg,
|
|
uart, data, sizeof(*data), QT2_USB_TIMEOUT);
|
|
|
|
}
|
|
|
|
static inline int qt2_setregister(struct usb_device *dev,
|
|
u8 uart, u8 reg, u16 data)
|
|
{
|
|
u16 value = (data << 8) | reg;
|
|
|
|
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
QT_SET_GET_REGISTER, 0x40, value, uart,
|
|
NULL, 0, QT2_USB_TIMEOUT);
|
|
}
|
|
|
|
static inline int update_mctrl(struct qt2_port_private *port_priv,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = port_priv->port;
|
|
struct usb_device *dev = port->serial->dev;
|
|
unsigned urb_value;
|
|
int status;
|
|
|
|
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
|
|
dev_dbg(&port->dev,
|
|
"update_mctrl - DTR|RTS not being set|cleared\n");
|
|
return 0; /* no change */
|
|
}
|
|
|
|
clear &= ~set; /* 'set' takes precedence over 'clear' */
|
|
urb_value = 0;
|
|
if (set & TIOCM_DTR)
|
|
urb_value |= UART_MCR_DTR;
|
|
if (set & TIOCM_RTS)
|
|
urb_value |= UART_MCR_RTS;
|
|
|
|
status = qt2_setregister(dev, port_priv->device_port, UART_MCR,
|
|
urb_value);
|
|
if (status < 0)
|
|
dev_err(&port->dev,
|
|
"update_mctrl - Error from MODEM_CTRL urb: %i\n",
|
|
status);
|
|
return status;
|
|
}
|
|
|
|
static int qt2_calc_num_ports(struct usb_serial *serial)
|
|
{
|
|
struct qt2_device_detail d;
|
|
int i;
|
|
|
|
for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) {
|
|
if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
|
|
return d.num_ports;
|
|
}
|
|
|
|
/* we didn't recognize the device */
|
|
dev_err(&serial->dev->dev,
|
|
"don't know the number of ports, assuming 1\n");
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void qt2_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port,
|
|
struct ktermios *old_termios)
|
|
{
|
|
struct usb_device *dev = port->serial->dev;
|
|
struct qt2_port_private *port_priv;
|
|
struct ktermios *termios = tty->termios;
|
|
u16 baud;
|
|
unsigned int cflag = termios->c_cflag;
|
|
u16 new_lcr = 0;
|
|
int status;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
if (cflag & PARENB) {
|
|
if (cflag & PARODD)
|
|
new_lcr |= UART_LCR_PARITY;
|
|
else
|
|
new_lcr |= SERIAL_EVEN_PARITY;
|
|
}
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
new_lcr |= UART_LCR_WLEN5;
|
|
break;
|
|
case CS6:
|
|
new_lcr |= UART_LCR_WLEN6;
|
|
break;
|
|
case CS7:
|
|
new_lcr |= UART_LCR_WLEN7;
|
|
break;
|
|
default:
|
|
case CS8:
|
|
new_lcr |= UART_LCR_WLEN8;
|
|
break;
|
|
}
|
|
|
|
baud = tty_get_baud_rate(tty);
|
|
if (!baud)
|
|
baud = 9600;
|
|
|
|
status = qt2_set_port_config(dev, port_priv->device_port, baud,
|
|
new_lcr);
|
|
if (status < 0)
|
|
dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n",
|
|
__func__, status);
|
|
|
|
if (cflag & CRTSCTS)
|
|
status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
|
|
SERIAL_CRTSCTS,
|
|
port_priv->device_port);
|
|
else
|
|
status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
|
|
0, port_priv->device_port);
|
|
if (status < 0)
|
|
dev_err(&port->dev, "%s - set HW flow control failed: %i\n",
|
|
__func__, status);
|
|
|
|
if (I_IXOFF(tty) || I_IXON(tty)) {
|
|
u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty)));
|
|
|
|
status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
|
|
x, port_priv->device_port);
|
|
} else
|
|
status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
|
|
0, port_priv->device_port);
|
|
|
|
if (status < 0)
|
|
dev_err(&port->dev, "%s - set SW flow control failed: %i\n",
|
|
__func__, status);
|
|
|
|
}
|
|
|
|
static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|
{
|
|
struct usb_serial *serial;
|
|
struct qt2_port_private *port_priv;
|
|
u8 *data;
|
|
u16 device_port;
|
|
int status;
|
|
unsigned long flags;
|
|
|
|
device_port = (u16) (port->number - port->serial->minor);
|
|
|
|
serial = port->serial;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
/* set the port to RS232 mode */
|
|
status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR,
|
|
QT2_QMCR_RS232, device_port);
|
|
if (status < 0) {
|
|
dev_err(&port->dev,
|
|
"%s failed to set RS232 mode for port %i error %i\n",
|
|
__func__, device_port, status);
|
|
return status;
|
|
}
|
|
|
|
data = kzalloc(2, GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
/* open the port */
|
|
status = usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
QT_OPEN_CLOSE_CHANNEL,
|
|
0xc0, 0,
|
|
device_port, data, 2, QT2_USB_TIMEOUT);
|
|
|
|
if (status < 0) {
|
|
dev_err(&port->dev, "%s - open port failed %i", __func__,
|
|
status);
|
|
kfree(data);
|
|
return status;
|
|
}
|
|
|
|
spin_lock_irqsave(&port_priv->lock, flags);
|
|
port_priv->shadowLSR = data[0];
|
|
port_priv->shadowMSR = data[1];
|
|
spin_unlock_irqrestore(&port_priv->lock, flags);
|
|
|
|
kfree(data);
|
|
|
|
/* set to default speed and 8bit word size */
|
|
status = qt2_set_port_config(serial->dev, device_port,
|
|
DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
|
|
if (status < 0) {
|
|
dev_err(&port->dev,
|
|
"%s - initial setup failed for port %i (%i)\n",
|
|
__func__, port->number, device_port);
|
|
return status;
|
|
}
|
|
|
|
port_priv->is_open = true;
|
|
port_priv->device_port = (u8) device_port;
|
|
|
|
if (tty)
|
|
qt2_set_termios(tty, port, tty->termios);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void qt2_close(struct usb_serial_port *port)
|
|
{
|
|
struct usb_serial *serial;
|
|
struct qt2_port_private *port_priv;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
serial = port->serial;
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
port_priv->is_open = false;
|
|
|
|
spin_lock_irqsave(&port_priv->urb_lock, flags);
|
|
if (port_priv->write_urb->status == -EINPROGRESS)
|
|
usb_kill_urb(port_priv->write_urb);
|
|
port_priv->urb_in_use = false;
|
|
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
|
|
|
|
/* flush the port transmit buffer */
|
|
i = usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
QT2_FLUSH_DEVICE, 0x40, 1,
|
|
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
|
|
|
|
if (i < 0)
|
|
dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n",
|
|
__func__, i);
|
|
|
|
/* flush the port receive buffer */
|
|
i = usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
QT2_FLUSH_DEVICE, 0x40, 0,
|
|
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
|
|
|
|
if (i < 0)
|
|
dev_err(&port->dev, "%s - receive buffer flush failed: %i\n",
|
|
__func__, i);
|
|
|
|
/* close the port */
|
|
i = usb_control_msg(serial->dev,
|
|
usb_sndctrlpipe(serial->dev, 0),
|
|
QT_OPEN_CLOSE_CHANNEL,
|
|
0x40, 0,
|
|
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
|
|
|
|
if (i < 0)
|
|
dev_err(&port->dev, "%s - close port failed %i\n",
|
|
__func__, i);
|
|
|
|
}
|
|
|
|
static void qt2_disconnect(struct usb_serial *serial)
|
|
{
|
|
struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
|
|
struct qt2_port_private *port_priv;
|
|
int i;
|
|
|
|
if (serial_priv->read_urb->status == -EINPROGRESS)
|
|
usb_kill_urb(serial_priv->read_urb);
|
|
|
|
usb_free_urb(serial_priv->read_urb);
|
|
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port_priv = usb_get_serial_port_data(serial->port[i]);
|
|
|
|
if (port_priv->write_urb->status == -EINPROGRESS)
|
|
usb_kill_urb(port_priv->write_urb);
|
|
usb_free_urb(port_priv->write_urb);
|
|
}
|
|
}
|
|
|
|
static int get_serial_info(struct usb_serial_port *port,
|
|
struct serial_struct __user *retinfo)
|
|
{
|
|
struct serial_struct tmp;
|
|
|
|
if (!retinfo)
|
|
return -EFAULT;
|
|
|
|
memset(&tmp, 0, sizeof(tmp));
|
|
tmp.line = port->serial->minor;
|
|
tmp.port = 0;
|
|
tmp.irq = 0;
|
|
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
|
|
tmp.xmit_fifo_size = port->bulk_out_size;
|
|
tmp.baud_base = 9600;
|
|
tmp.close_delay = 5*HZ;
|
|
tmp.closing_wait = 30*HZ;
|
|
|
|
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
|
|
{
|
|
struct qt2_port_private *priv = usb_get_serial_port_data(port);
|
|
struct async_icount prev, cur;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
prev = priv->icount;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
while (1) {
|
|
wait_event_interruptible(priv->delta_msr_wait,
|
|
((priv->icount.rng != prev.rng) ||
|
|
(priv->icount.dsr != prev.dsr) ||
|
|
(priv->icount.dcd != prev.dcd) ||
|
|
(priv->icount.cts != prev.cts)));
|
|
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
cur = priv->icount;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if ((prev.rng == cur.rng) &&
|
|
(prev.dsr == cur.dsr) &&
|
|
(prev.dcd == cur.dcd) &&
|
|
(prev.cts == cur.cts))
|
|
return -EIO;
|
|
|
|
if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
|
|
(arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
|
|
(arg & TIOCM_CD && (prev.dcd != cur.dcd)) ||
|
|
(arg & TIOCM_CTS && (prev.cts != cur.cts)))
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int qt2_get_icount(struct tty_struct *tty,
|
|
struct serial_icounter_struct *icount)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct qt2_port_private *priv = usb_get_serial_port_data(port);
|
|
struct async_icount cnow = priv->icount;
|
|
|
|
icount->cts = cnow.cts;
|
|
icount->dsr = cnow.dsr;
|
|
icount->rng = cnow.rng;
|
|
icount->dcd = cnow.dcd;
|
|
icount->rx = cnow.rx;
|
|
icount->tx = cnow.tx;
|
|
icount->frame = cnow.frame;
|
|
icount->overrun = cnow.overrun;
|
|
icount->parity = cnow.parity;
|
|
icount->brk = cnow.brk;
|
|
icount->buf_overrun = cnow.buf_overrun;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qt2_ioctl(struct tty_struct *tty,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
switch (cmd) {
|
|
case TIOCGSERIAL:
|
|
return get_serial_info(port,
|
|
(struct serial_struct __user *)arg);
|
|
|
|
case TIOCMIWAIT:
|
|
return wait_modem_info(port, arg);
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch)
|
|
{
|
|
switch (*ch) {
|
|
case QT2_LINE_STATUS:
|
|
qt2_update_lsr(port, ch + 1);
|
|
break;
|
|
case QT2_MODEM_STATUS:
|
|
qt2_update_msr(port, ch + 1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* not needed, kept to document functionality */
|
|
static void qt2_process_xmit_empty(struct usb_serial_port *port,
|
|
unsigned char *ch)
|
|
{
|
|
int bytes_written;
|
|
|
|
bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4);
|
|
}
|
|
|
|
/* not needed, kept to document functionality */
|
|
static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
|
|
{
|
|
return;
|
|
}
|
|
|
|
void qt2_process_read_urb(struct urb *urb)
|
|
{
|
|
struct usb_serial *serial;
|
|
struct qt2_serial_private *serial_priv;
|
|
struct usb_serial_port *port;
|
|
struct qt2_port_private *port_priv;
|
|
struct tty_struct *tty;
|
|
bool escapeflag;
|
|
unsigned char *ch;
|
|
int i;
|
|
unsigned char newport;
|
|
int len = urb->actual_length;
|
|
|
|
if (!len)
|
|
return;
|
|
|
|
ch = urb->transfer_buffer;
|
|
tty = NULL;
|
|
serial = urb->context;
|
|
serial_priv = usb_get_serial_data(serial);
|
|
port = serial->port[serial_priv->current_port];
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
if (port_priv->is_open)
|
|
tty = tty_port_tty_get(&port->port);
|
|
|
|
for (i = 0; i < urb->actual_length; i++) {
|
|
ch = (unsigned char *)urb->transfer_buffer + i;
|
|
if ((i <= (len - 3)) &&
|
|
(*ch == QT2_CONTROL_BYTE) &&
|
|
(*(ch + 1) == QT2_CONTROL_BYTE)) {
|
|
escapeflag = false;
|
|
switch (*(ch + 2)) {
|
|
case QT2_LINE_STATUS:
|
|
case QT2_MODEM_STATUS:
|
|
if (i > (len - 4)) {
|
|
dev_warn(&port->dev,
|
|
"%s - status message too short\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
qt2_process_status(port, ch + 2);
|
|
i += 3;
|
|
escapeflag = true;
|
|
break;
|
|
case QT2_XMIT_HOLD:
|
|
if (i > (len - 5)) {
|
|
dev_warn(&port->dev,
|
|
"%s - xmit_empty message too short\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
qt2_process_xmit_empty(port, ch + 3);
|
|
i += 4;
|
|
escapeflag = true;
|
|
break;
|
|
case QT2_CHANGE_PORT:
|
|
if (i > (len - 4)) {
|
|
dev_warn(&port->dev,
|
|
"%s - change_port message too short\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
if (tty) {
|
|
tty_flip_buffer_push(tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
|
|
newport = *(ch + 3);
|
|
|
|
if (newport > serial->num_ports) {
|
|
dev_err(&port->dev,
|
|
"%s - port change to invalid port: %i\n",
|
|
__func__, newport);
|
|
break;
|
|
}
|
|
|
|
serial_priv->current_port = newport;
|
|
port = serial->port[serial_priv->current_port];
|
|
port_priv = usb_get_serial_port_data(port);
|
|
if (port_priv->is_open)
|
|
tty = tty_port_tty_get(&port->port);
|
|
else
|
|
tty = NULL;
|
|
i += 3;
|
|
escapeflag = true;
|
|
break;
|
|
case QT2_REC_FLUSH:
|
|
case QT2_XMIT_FLUSH:
|
|
qt2_process_flush(port, ch + 2);
|
|
i += 2;
|
|
escapeflag = true;
|
|
break;
|
|
case QT2_CONTROL_ESCAPE:
|
|
tty_buffer_request_room(tty, 2);
|
|
tty_insert_flip_string(tty, ch, 2);
|
|
i += 2;
|
|
escapeflag = true;
|
|
break;
|
|
default:
|
|
dev_warn(&port->dev,
|
|
"%s - unsupported command %i\n",
|
|
__func__, *(ch + 2));
|
|
break;
|
|
}
|
|
if (escapeflag)
|
|
continue;
|
|
}
|
|
|
|
if (tty) {
|
|
tty_buffer_request_room(tty, 1);
|
|
tty_insert_flip_string(tty, ch, 1);
|
|
}
|
|
}
|
|
|
|
if (tty) {
|
|
tty_flip_buffer_push(tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
}
|
|
|
|
static void qt2_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port;
|
|
struct qt2_port_private *port_priv;
|
|
|
|
port = urb->context;
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
spin_lock(&port_priv->urb_lock);
|
|
|
|
port_priv->urb_in_use = false;
|
|
usb_serial_port_softint(port);
|
|
|
|
spin_unlock(&port_priv->urb_lock);
|
|
|
|
}
|
|
|
|
static void qt2_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial *serial = urb->context;
|
|
int status;
|
|
|
|
if (urb->status) {
|
|
dev_warn(&serial->dev->dev,
|
|
"%s - non-zero urb status: %i\n", __func__,
|
|
urb->status);
|
|
return;
|
|
}
|
|
|
|
qt2_process_read_urb(urb);
|
|
|
|
status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (status != 0)
|
|
dev_err(&serial->dev->dev,
|
|
"%s - resubmit read urb failed: %i\n",
|
|
__func__, status);
|
|
}
|
|
|
|
static int qt2_setup_urbs(struct usb_serial *serial)
|
|
{
|
|
struct usb_serial_port *port;
|
|
struct usb_serial_port *port0;
|
|
struct qt2_serial_private *serial_priv;
|
|
struct qt2_port_private *port_priv;
|
|
int pcount, status;
|
|
|
|
port0 = serial->port[0];
|
|
|
|
serial_priv = usb_get_serial_data(serial);
|
|
serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!serial_priv->read_urb) {
|
|
dev_err(&serial->dev->dev, "No free urbs available\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
|
|
usb_rcvbulkpipe(serial->dev,
|
|
port0->bulk_in_endpointAddress),
|
|
serial_priv->read_buffer,
|
|
sizeof(serial_priv->read_buffer),
|
|
qt2_read_bulk_callback, serial);
|
|
|
|
/* setup write_urb for each port */
|
|
for (pcount = 0; pcount < serial->num_ports; pcount++) {
|
|
|
|
port = serial->port[pcount];
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!port_priv->write_urb) {
|
|
dev_err(&serial->dev->dev,
|
|
"failed to alloc write_urb for port %i\n",
|
|
pcount);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
usb_fill_bulk_urb(port_priv->write_urb,
|
|
serial->dev,
|
|
usb_sndbulkpipe(serial->dev,
|
|
port0->
|
|
bulk_out_endpointAddress),
|
|
port_priv->write_buffer,
|
|
sizeof(port_priv->write_buffer),
|
|
qt2_write_bulk_callback, port);
|
|
}
|
|
|
|
status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
|
|
if (status != 0) {
|
|
dev_err(&serial->dev->dev,
|
|
"%s - submit read urb failed %i\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int qt2_attach(struct usb_serial *serial)
|
|
{
|
|
struct qt2_serial_private *serial_priv;
|
|
struct qt2_port_private *port_priv;
|
|
int status, pcount;
|
|
|
|
/* power on unit */
|
|
status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
0xc2, 0x40, 0x8000, 0, NULL, 0,
|
|
QT2_USB_TIMEOUT);
|
|
if (status < 0) {
|
|
dev_err(&serial->dev->dev,
|
|
"%s - failed to power on unit: %i\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
|
|
if (!serial_priv) {
|
|
dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
usb_set_serial_data(serial, serial_priv);
|
|
|
|
for (pcount = 0; pcount < serial->num_ports; pcount++) {
|
|
port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
|
|
if (!port_priv) {
|
|
dev_err(&serial->dev->dev,
|
|
"%s- kmalloc(%Zd) failed.\n", __func__,
|
|
sizeof(*port_priv));
|
|
pcount--;
|
|
status = -ENOMEM;
|
|
goto attach_failed;
|
|
}
|
|
|
|
spin_lock_init(&port_priv->lock);
|
|
spin_lock_init(&port_priv->urb_lock);
|
|
init_waitqueue_head(&port_priv->delta_msr_wait);
|
|
|
|
port_priv->port = serial->port[pcount];
|
|
|
|
usb_set_serial_port_data(serial->port[pcount], port_priv);
|
|
}
|
|
|
|
status = qt2_setup_urbs(serial);
|
|
if (status != 0)
|
|
goto attach_failed;
|
|
|
|
return 0;
|
|
|
|
attach_failed:
|
|
for (/* empty */; pcount >= 0; pcount--) {
|
|
port_priv = usb_get_serial_port_data(serial->port[pcount]);
|
|
kfree(port_priv);
|
|
}
|
|
kfree(serial_priv);
|
|
return status;
|
|
}
|
|
|
|
static int qt2_tiocmget(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_device *dev = port->serial->dev;
|
|
struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
|
|
u8 *d;
|
|
int r;
|
|
|
|
d = kzalloc(2, GFP_KERNEL);
|
|
if (!d)
|
|
return -ENOMEM;
|
|
|
|
r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d);
|
|
if (r < 0)
|
|
goto mget_out;
|
|
|
|
r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1);
|
|
if (r < 0)
|
|
goto mget_out;
|
|
|
|
r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
|
|
(d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
|
|
(d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
|
|
(d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
|
|
(d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
|
|
(d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
|
|
|
|
mget_out:
|
|
kfree(d);
|
|
return r;
|
|
}
|
|
|
|
static int qt2_tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct qt2_port_private *port_priv;
|
|
|
|
port_priv = usb_get_serial_port_data(tty->driver_data);
|
|
return update_mctrl(port_priv, set, clear);
|
|
}
|
|
|
|
static void qt2_break_ctl(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct qt2_port_private *port_priv;
|
|
int status;
|
|
u16 val;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
if (!port_priv->is_open) {
|
|
dev_err(&port->dev,
|
|
"%s - port is not open\n", __func__);
|
|
return;
|
|
}
|
|
|
|
val = (break_state == -1) ? 1 : 0;
|
|
|
|
status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
|
|
val, port_priv->device_port);
|
|
if (status < 0)
|
|
dev_warn(&port->dev,
|
|
"%s - failed to send control message: %i\n", __func__,
|
|
status);
|
|
}
|
|
|
|
|
|
|
|
static void qt2_dtr_rts(struct usb_serial_port *port, int on)
|
|
{
|
|
struct usb_device *dev = port->serial->dev;
|
|
struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
|
|
|
|
mutex_lock(&port->serial->disc_mutex);
|
|
if (!port->serial->disconnected) {
|
|
/* Disable flow control */
|
|
if (!on && qt2_setregister(dev, port_priv->device_port,
|
|
UART_MCR, 0) < 0)
|
|
dev_warn(&port->dev, "error from flowcontrol urb\n");
|
|
/* drop RTS and DTR */
|
|
if (on)
|
|
update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0);
|
|
else
|
|
update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS);
|
|
}
|
|
mutex_unlock(&port->serial->disc_mutex);
|
|
}
|
|
|
|
static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
|
|
{
|
|
struct qt2_port_private *port_priv;
|
|
u8 newMSR = (u8) *ch;
|
|
unsigned long flags;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
spin_lock_irqsave(&port_priv->lock, flags);
|
|
port_priv->shadowMSR = newMSR;
|
|
spin_unlock_irqrestore(&port_priv->lock, flags);
|
|
|
|
if (newMSR & UART_MSR_ANY_DELTA) {
|
|
/* update input line counters */
|
|
if (newMSR & UART_MSR_DCTS)
|
|
port_priv->icount.cts++;
|
|
|
|
if (newMSR & UART_MSR_DDSR)
|
|
port_priv->icount.dsr++;
|
|
|
|
if (newMSR & UART_MSR_DDCD)
|
|
port_priv->icount.dcd++;
|
|
|
|
if (newMSR & UART_MSR_TERI)
|
|
port_priv->icount.rng++;
|
|
|
|
wake_up_interruptible(&port_priv->delta_msr_wait);
|
|
}
|
|
}
|
|
|
|
static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
|
|
{
|
|
struct qt2_port_private *port_priv;
|
|
struct async_icount *icount;
|
|
unsigned long flags;
|
|
u8 newLSR = (u8) *ch;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
if (newLSR & UART_LSR_BI)
|
|
newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
|
|
|
|
spin_lock_irqsave(&port_priv->lock, flags);
|
|
port_priv->shadowLSR = newLSR;
|
|
spin_unlock_irqrestore(&port_priv->lock, flags);
|
|
|
|
icount = &port_priv->icount;
|
|
|
|
if (newLSR & UART_LSR_BRK_ERROR_BITS) {
|
|
|
|
if (newLSR & UART_LSR_BI)
|
|
icount->brk++;
|
|
|
|
if (newLSR & UART_LSR_OE)
|
|
icount->overrun++;
|
|
|
|
if (newLSR & UART_LSR_PE)
|
|
icount->parity++;
|
|
|
|
if (newLSR & UART_LSR_FE)
|
|
icount->frame++;
|
|
}
|
|
|
|
}
|
|
|
|
static int qt2_write_room(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct qt2_port_private *port_priv;
|
|
unsigned long flags = 0;
|
|
int r;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
spin_lock_irqsave(&port_priv->urb_lock, flags);
|
|
|
|
if (port_priv->urb_in_use)
|
|
r = 0;
|
|
else
|
|
r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE;
|
|
|
|
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int qt2_write(struct tty_struct *tty,
|
|
struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
struct qt2_port_private *port_priv;
|
|
struct urb *write_urb;
|
|
unsigned char *data;
|
|
unsigned long flags;
|
|
int status;
|
|
int bytes_out = 0;
|
|
|
|
port_priv = usb_get_serial_port_data(port);
|
|
|
|
if (port_priv->write_urb == NULL) {
|
|
dev_err(&port->dev, "%s - no output urb\n", __func__);
|
|
return 0;
|
|
}
|
|
write_urb = port_priv->write_urb;
|
|
|
|
count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE);
|
|
|
|
data = write_urb->transfer_buffer;
|
|
spin_lock_irqsave(&port_priv->urb_lock, flags);
|
|
if (port_priv->urb_in_use == true) {
|
|
printk(KERN_INFO "qt2_write - urb is in use\n");
|
|
goto write_out;
|
|
}
|
|
|
|
*data++ = QT2_CONTROL_BYTE;
|
|
*data++ = QT2_CONTROL_BYTE;
|
|
*data++ = port_priv->device_port;
|
|
put_unaligned_le16(count, data);
|
|
data += 2;
|
|
memcpy(data, buf, count);
|
|
|
|
write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE;
|
|
|
|
status = usb_submit_urb(write_urb, GFP_ATOMIC);
|
|
if (status == 0) {
|
|
port_priv->urb_in_use = true;
|
|
bytes_out += count;
|
|
}
|
|
|
|
write_out:
|
|
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
|
|
return bytes_out;
|
|
}
|
|
|
|
|
|
static struct usb_serial_driver qt2_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "quatech-serial",
|
|
},
|
|
.description = DRIVER_DESC,
|
|
.id_table = id_table,
|
|
.open = qt2_open,
|
|
.close = qt2_close,
|
|
.write = qt2_write,
|
|
.write_room = qt2_write_room,
|
|
.calc_num_ports = qt2_calc_num_ports,
|
|
.attach = qt2_attach,
|
|
.release = qt2_release,
|
|
.disconnect = qt2_disconnect,
|
|
.dtr_rts = qt2_dtr_rts,
|
|
.break_ctl = qt2_break_ctl,
|
|
.tiocmget = qt2_tiocmget,
|
|
.tiocmset = qt2_tiocmset,
|
|
.get_icount = qt2_get_icount,
|
|
.ioctl = qt2_ioctl,
|
|
.set_termios = qt2_set_termios,
|
|
};
|
|
|
|
static struct usb_serial_driver *const serial_drivers[] = {
|
|
&qt2_device, NULL
|
|
};
|
|
|
|
module_usb_serial_driver(serial_drivers, id_table);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|