mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 06:56:40 +07:00
68e2411345
This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
846 lines
23 KiB
C
846 lines
23 KiB
C
/*
|
|
* Prolific PL2303 USB to serial adaptor driver
|
|
*
|
|
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2003 IBM Corp.
|
|
*
|
|
* Original driver for 2.2.x by anonymous
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*
|
|
* See Documentation/usb/usb-serial.txt for more information on using this
|
|
* driver
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
#include "pl2303.h"
|
|
|
|
/*
|
|
* Version Information
|
|
*/
|
|
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
|
|
|
|
static bool debug;
|
|
|
|
static const struct usb_device_id id_table[] = {
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
|
|
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
|
|
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
|
|
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
|
|
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
|
|
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
|
|
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
|
|
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
|
|
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
|
|
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
|
|
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
|
|
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
|
|
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
|
|
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
|
|
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
|
|
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
|
|
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
|
|
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
|
|
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
|
|
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
|
|
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
|
|
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
|
|
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
|
|
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
|
|
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
|
|
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
|
|
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
|
|
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
|
|
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
|
|
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
|
|
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
|
|
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
|
|
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
|
|
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
|
|
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
|
|
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
|
|
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
|
|
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
|
|
{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
|
|
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
|
|
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
|
|
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
|
|
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
#define SET_LINE_REQUEST_TYPE 0x21
|
|
#define SET_LINE_REQUEST 0x20
|
|
|
|
#define SET_CONTROL_REQUEST_TYPE 0x21
|
|
#define SET_CONTROL_REQUEST 0x22
|
|
#define CONTROL_DTR 0x01
|
|
#define CONTROL_RTS 0x02
|
|
|
|
#define BREAK_REQUEST_TYPE 0x21
|
|
#define BREAK_REQUEST 0x23
|
|
#define BREAK_ON 0xffff
|
|
#define BREAK_OFF 0x0000
|
|
|
|
#define GET_LINE_REQUEST_TYPE 0xa1
|
|
#define GET_LINE_REQUEST 0x21
|
|
|
|
#define VENDOR_WRITE_REQUEST_TYPE 0x40
|
|
#define VENDOR_WRITE_REQUEST 0x01
|
|
|
|
#define VENDOR_READ_REQUEST_TYPE 0xc0
|
|
#define VENDOR_READ_REQUEST 0x01
|
|
|
|
#define UART_STATE 0x08
|
|
#define UART_STATE_TRANSIENT_MASK 0x74
|
|
#define UART_DCD 0x01
|
|
#define UART_DSR 0x02
|
|
#define UART_BREAK_ERROR 0x04
|
|
#define UART_RING 0x08
|
|
#define UART_FRAME_ERROR 0x10
|
|
#define UART_PARITY_ERROR 0x20
|
|
#define UART_OVERRUN_ERROR 0x40
|
|
#define UART_CTS 0x80
|
|
|
|
|
|
enum pl2303_type {
|
|
type_0, /* don't know the difference between type 0 and */
|
|
type_1, /* type 1, until someone from prolific tells us... */
|
|
HX, /* HX version of the pl2303 chip */
|
|
};
|
|
|
|
struct pl2303_private {
|
|
spinlock_t lock;
|
|
wait_queue_head_t delta_msr_wait;
|
|
u8 line_control;
|
|
u8 line_status;
|
|
enum pl2303_type type;
|
|
};
|
|
|
|
static int pl2303_vendor_read(__u16 value, __u16 index,
|
|
struct usb_serial *serial, unsigned char *buf)
|
|
{
|
|
int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
|
|
value, index, buf, 1, 100);
|
|
dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n",
|
|
VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index,
|
|
res, buf[0]);
|
|
return res;
|
|
}
|
|
|
|
static int pl2303_vendor_write(__u16 value, __u16 index,
|
|
struct usb_serial *serial)
|
|
{
|
|
int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
|
|
value, index, NULL, 0, 100);
|
|
dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d\n",
|
|
VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index,
|
|
res);
|
|
return res;
|
|
}
|
|
|
|
static int pl2303_startup(struct usb_serial *serial)
|
|
{
|
|
struct pl2303_private *priv;
|
|
enum pl2303_type type = type_0;
|
|
unsigned char *buf;
|
|
int i;
|
|
|
|
buf = kmalloc(10, GFP_KERNEL);
|
|
if (buf == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (serial->dev->descriptor.bDeviceClass == 0x02)
|
|
type = type_0;
|
|
else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
|
|
type = HX;
|
|
else if (serial->dev->descriptor.bDeviceClass == 0x00)
|
|
type = type_1;
|
|
else if (serial->dev->descriptor.bDeviceClass == 0xFF)
|
|
type = type_1;
|
|
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
|
|
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
|
|
if (!priv)
|
|
goto cleanup;
|
|
spin_lock_init(&priv->lock);
|
|
init_waitqueue_head(&priv->delta_msr_wait);
|
|
priv->type = type;
|
|
usb_set_serial_port_data(serial->port[i], priv);
|
|
}
|
|
|
|
pl2303_vendor_read(0x8484, 0, serial, buf);
|
|
pl2303_vendor_write(0x0404, 0, serial);
|
|
pl2303_vendor_read(0x8484, 0, serial, buf);
|
|
pl2303_vendor_read(0x8383, 0, serial, buf);
|
|
pl2303_vendor_read(0x8484, 0, serial, buf);
|
|
pl2303_vendor_write(0x0404, 1, serial);
|
|
pl2303_vendor_read(0x8484, 0, serial, buf);
|
|
pl2303_vendor_read(0x8383, 0, serial, buf);
|
|
pl2303_vendor_write(0, 1, serial);
|
|
pl2303_vendor_write(1, 0, serial);
|
|
if (type == HX)
|
|
pl2303_vendor_write(2, 0x44, serial);
|
|
else
|
|
pl2303_vendor_write(2, 0x24, serial);
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
|
|
cleanup:
|
|
kfree(buf);
|
|
for (--i; i >= 0; --i) {
|
|
priv = usb_get_serial_port_data(serial->port[i]);
|
|
kfree(priv);
|
|
usb_set_serial_port_data(serial->port[i], NULL);
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int set_control_lines(struct usb_device *dev, u8 value)
|
|
{
|
|
int retval;
|
|
|
|
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
|
|
value, 0, NULL, 0, 100);
|
|
dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__,
|
|
value, retval);
|
|
return retval;
|
|
}
|
|
|
|
static void pl2303_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
unsigned int cflag;
|
|
unsigned char *buf;
|
|
int baud;
|
|
int i;
|
|
u8 control;
|
|
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
|
|
4800, 7200, 9600, 14400, 19200, 28800, 38400,
|
|
57600, 115200, 230400, 460800, 614400,
|
|
921600, 1228800, 2457600, 3000000, 6000000 };
|
|
int baud_floor, baud_ceil;
|
|
int k;
|
|
|
|
/* The PL2303 is reported to lose bytes if you change
|
|
serial settings even to the same values as before. Thus
|
|
we actually need to filter in this specific case */
|
|
|
|
if (!tty_termios_hw_change(tty->termios, old_termios))
|
|
return;
|
|
|
|
cflag = tty->termios->c_cflag;
|
|
|
|
buf = kzalloc(7, GFP_KERNEL);
|
|
if (!buf) {
|
|
dev_err(&port->dev, "%s - out of memory.\n", __func__);
|
|
/* Report back no change occurred */
|
|
*tty->termios = *old_termios;
|
|
return;
|
|
}
|
|
|
|
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
|
|
0, 0, buf, 7, 100);
|
|
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i,
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
|
|
|
|
if (cflag & CSIZE) {
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
buf[6] = 5;
|
|
break;
|
|
case CS6:
|
|
buf[6] = 6;
|
|
break;
|
|
case CS7:
|
|
buf[6] = 7;
|
|
break;
|
|
default:
|
|
case CS8:
|
|
buf[6] = 8;
|
|
break;
|
|
}
|
|
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
|
|
}
|
|
|
|
/* For reference buf[0]:buf[3] baud rate value */
|
|
/* NOTE: Only the values defined in baud_sup are supported !
|
|
* => if unsupported values are set, the PL2303 seems to use
|
|
* 9600 baud (at least my PL2303X always does)
|
|
*/
|
|
baud = tty_get_baud_rate(tty);
|
|
dev_dbg(&port->dev, "baud requested = %d\n", baud);
|
|
if (baud) {
|
|
/* Set baudrate to nearest supported value */
|
|
for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
|
|
if (baud_sup[k] / baud) {
|
|
baud_ceil = baud_sup[k];
|
|
if (k==0) {
|
|
baud = baud_ceil;
|
|
} else {
|
|
baud_floor = baud_sup[k-1];
|
|
if ((baud_ceil % baud)
|
|
> (baud % baud_floor))
|
|
baud = baud_floor;
|
|
else
|
|
baud = baud_ceil;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
if (baud > 1228800) {
|
|
/* type_0, type_1 only support up to 1228800 baud */
|
|
if (priv->type != HX)
|
|
baud = 1228800;
|
|
else if (baud > 6000000)
|
|
baud = 6000000;
|
|
}
|
|
dev_dbg(&port->dev, "baud set = %d\n", baud);
|
|
if (baud <= 115200) {
|
|
buf[0] = baud & 0xff;
|
|
buf[1] = (baud >> 8) & 0xff;
|
|
buf[2] = (baud >> 16) & 0xff;
|
|
buf[3] = (baud >> 24) & 0xff;
|
|
} else {
|
|
/* apparently the formula for higher speeds is:
|
|
* baudrate = 12M * 32 / (2^buf[1]) / buf[0]
|
|
*/
|
|
unsigned tmp = 12*1000*1000*32 / baud;
|
|
buf[3] = 0x80;
|
|
buf[2] = 0;
|
|
buf[1] = (tmp >= 256);
|
|
while (tmp >= 256) {
|
|
tmp >>= 2;
|
|
buf[1] <<= 1;
|
|
}
|
|
buf[0] = tmp;
|
|
}
|
|
}
|
|
|
|
/* For reference buf[4]=0 is 1 stop bits */
|
|
/* For reference buf[4]=1 is 1.5 stop bits */
|
|
/* For reference buf[4]=2 is 2 stop bits */
|
|
if (cflag & CSTOPB) {
|
|
/* NOTE: Comply with "real" UARTs / RS232:
|
|
* use 1.5 instead of 2 stop bits with 5 data bits
|
|
*/
|
|
if ((cflag & CSIZE) == CS5) {
|
|
buf[4] = 1;
|
|
dev_dbg(&port->dev, "stop bits = 1.5\n");
|
|
} else {
|
|
buf[4] = 2;
|
|
dev_dbg(&port->dev, "stop bits = 2\n");
|
|
}
|
|
} else {
|
|
buf[4] = 0;
|
|
dev_dbg(&port->dev, "stop bits = 1\n");
|
|
}
|
|
|
|
if (cflag & PARENB) {
|
|
/* For reference buf[5]=0 is none parity */
|
|
/* For reference buf[5]=1 is odd parity */
|
|
/* For reference buf[5]=2 is even parity */
|
|
/* For reference buf[5]=3 is mark parity */
|
|
/* For reference buf[5]=4 is space parity */
|
|
if (cflag & PARODD) {
|
|
if (cflag & CMSPAR) {
|
|
buf[5] = 3;
|
|
dev_dbg(&port->dev, "parity = mark\n");
|
|
} else {
|
|
buf[5] = 1;
|
|
dev_dbg(&port->dev, "parity = odd\n");
|
|
}
|
|
} else {
|
|
if (cflag & CMSPAR) {
|
|
buf[5] = 4;
|
|
dev_dbg(&port->dev, "parity = space\n");
|
|
} else {
|
|
buf[5] = 2;
|
|
dev_dbg(&port->dev, "parity = even\n");
|
|
}
|
|
}
|
|
} else {
|
|
buf[5] = 0;
|
|
dev_dbg(&port->dev, "parity = none\n");
|
|
}
|
|
|
|
i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
|
|
0, 0, buf, 7, 100);
|
|
dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i);
|
|
|
|
/* change control lines if we are switching to or from B0 */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
control = priv->line_control;
|
|
if ((cflag & CBAUD) == B0)
|
|
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
|
|
else if ((old_termios->c_cflag & CBAUD) == B0)
|
|
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
|
|
if (control != priv->line_control) {
|
|
control = priv->line_control;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
set_control_lines(serial->dev, control);
|
|
} else {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
|
|
|
|
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
|
|
0, 0, buf, 7, 100);
|
|
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i,
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
|
|
|
|
if (cflag & CRTSCTS) {
|
|
if (priv->type == HX)
|
|
pl2303_vendor_write(0x0, 0x61, serial);
|
|
else
|
|
pl2303_vendor_write(0x0, 0x41, serial);
|
|
} else {
|
|
pl2303_vendor_write(0x0, 0x0, serial);
|
|
}
|
|
|
|
/* Save resulting baud rate */
|
|
if (baud)
|
|
tty_encode_baud_rate(tty, baud, baud);
|
|
|
|
kfree(buf);
|
|
}
|
|
|
|
static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
|
|
{
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
u8 control;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
/* Change DTR and RTS */
|
|
if (on)
|
|
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
|
|
else
|
|
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
|
|
control = priv->line_control;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
set_control_lines(port->serial->dev, control);
|
|
}
|
|
|
|
static void pl2303_close(struct usb_serial_port *port)
|
|
{
|
|
usb_serial_generic_close(port);
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
}
|
|
|
|
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|
{
|
|
struct ktermios tmp_termios;
|
|
struct usb_serial *serial = port->serial;
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
int result;
|
|
|
|
if (priv->type != HX) {
|
|
usb_clear_halt(serial->dev, port->write_urb->pipe);
|
|
usb_clear_halt(serial->dev, port->read_urb->pipe);
|
|
} else {
|
|
/* reset upstream data pipes */
|
|
pl2303_vendor_write(8, 0, serial);
|
|
pl2303_vendor_write(9, 0, serial);
|
|
}
|
|
|
|
/* Setup termios */
|
|
if (tty)
|
|
pl2303_set_termios(tty, port, &tmp_termios);
|
|
|
|
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
if (result) {
|
|
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
|
|
" error %d\n", __func__, result);
|
|
return result;
|
|
}
|
|
|
|
result = usb_serial_generic_open(tty, port);
|
|
if (result) {
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
return result;
|
|
}
|
|
|
|
port->port.drain_delay = 256;
|
|
return 0;
|
|
}
|
|
|
|
static int pl2303_tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_serial *serial = port->serial;
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
u8 control;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (set & TIOCM_RTS)
|
|
priv->line_control |= CONTROL_RTS;
|
|
if (set & TIOCM_DTR)
|
|
priv->line_control |= CONTROL_DTR;
|
|
if (clear & TIOCM_RTS)
|
|
priv->line_control &= ~CONTROL_RTS;
|
|
if (clear & TIOCM_DTR)
|
|
priv->line_control &= ~CONTROL_DTR;
|
|
control = priv->line_control;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
mutex_lock(&serial->disc_mutex);
|
|
if (!serial->disconnected)
|
|
ret = set_control_lines(serial->dev, control);
|
|
else
|
|
ret = -ENODEV;
|
|
mutex_unlock(&serial->disc_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pl2303_tiocmget(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
unsigned int mcr;
|
|
unsigned int status;
|
|
unsigned int result;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
mcr = priv->line_control;
|
|
status = priv->line_status;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
|
|
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
|
|
| ((status & UART_CTS) ? TIOCM_CTS : 0)
|
|
| ((status & UART_DSR) ? TIOCM_DSR : 0)
|
|
| ((status & UART_RING) ? TIOCM_RI : 0)
|
|
| ((status & UART_DCD) ? TIOCM_CD : 0);
|
|
|
|
dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int pl2303_carrier_raised(struct usb_serial_port *port)
|
|
{
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
if (priv->line_status & UART_DCD)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
|
|
{
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
unsigned int prevstatus;
|
|
unsigned int status;
|
|
unsigned int changed;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
prevstatus = priv->line_status;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
while (1) {
|
|
interruptible_sleep_on(&priv->delta_msr_wait);
|
|
/* see if a signal did it */
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
status = priv->line_status;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
changed = prevstatus ^ status;
|
|
|
|
if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
|
|
((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
|
|
((arg & TIOCM_CD) && (changed & UART_DCD)) ||
|
|
((arg & TIOCM_CTS) && (changed & UART_CTS))) {
|
|
return 0;
|
|
}
|
|
prevstatus = status;
|
|
}
|
|
/* NOTREACHED */
|
|
return 0;
|
|
}
|
|
|
|
static int pl2303_ioctl(struct tty_struct *tty,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct serial_struct ser;
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd);
|
|
|
|
switch (cmd) {
|
|
case TIOCGSERIAL:
|
|
memset(&ser, 0, sizeof ser);
|
|
ser.type = PORT_16654;
|
|
ser.line = port->serial->minor;
|
|
ser.port = port->number;
|
|
ser.baud_base = 460800;
|
|
|
|
if (copy_to_user((void __user *)arg, &ser, sizeof ser))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
case TIOCMIWAIT:
|
|
dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
|
|
return wait_modem_info(port, arg);
|
|
default:
|
|
dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
|
|
break;
|
|
}
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_serial *serial = port->serial;
|
|
u16 state;
|
|
int result;
|
|
|
|
if (break_state == 0)
|
|
state = BREAK_OFF;
|
|
else
|
|
state = BREAK_ON;
|
|
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
|
|
state == BREAK_OFF ? "off" : "on");
|
|
|
|
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
|
|
0, NULL, 0, 100);
|
|
if (result)
|
|
dev_err(&port->dev, "error sending break = %d\n", result);
|
|
}
|
|
|
|
static void pl2303_release(struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
struct pl2303_private *priv;
|
|
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
priv = usb_get_serial_port_data(serial->port[i]);
|
|
kfree(priv);
|
|
}
|
|
}
|
|
|
|
static void pl2303_update_line_status(struct usb_serial_port *port,
|
|
unsigned char *data,
|
|
unsigned int actual_length)
|
|
{
|
|
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
struct tty_struct *tty;
|
|
unsigned long flags;
|
|
u8 status_idx = UART_STATE;
|
|
u8 length = UART_STATE + 1;
|
|
u8 prev_line_status;
|
|
u16 idv, idp;
|
|
|
|
idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
|
|
idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
|
|
|
|
|
|
if (idv == SIEMENS_VENDOR_ID) {
|
|
if (idp == SIEMENS_PRODUCT_ID_X65 ||
|
|
idp == SIEMENS_PRODUCT_ID_SX1 ||
|
|
idp == SIEMENS_PRODUCT_ID_X75) {
|
|
|
|
length = 1;
|
|
status_idx = 0;
|
|
}
|
|
}
|
|
|
|
if (actual_length < length)
|
|
return;
|
|
|
|
/* Save off the uart status for others to look at */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
prev_line_status = priv->line_status;
|
|
priv->line_status = data[status_idx];
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
if (priv->line_status & UART_BREAK_ERROR)
|
|
usb_serial_handle_break(port);
|
|
wake_up_interruptible(&priv->delta_msr_wait);
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
if (!tty)
|
|
return;
|
|
if ((priv->line_status ^ prev_line_status) & UART_DCD)
|
|
usb_serial_handle_dcd_change(port, tty,
|
|
priv->line_status & UART_DCD);
|
|
tty_kref_put(tty);
|
|
}
|
|
|
|
static void pl2303_read_int_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
unsigned int actual_length = urb->actual_length;
|
|
int status = urb->status;
|
|
int retval;
|
|
|
|
switch (status) {
|
|
case 0:
|
|
/* success */
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
/* this urb is terminated, clean up */
|
|
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
|
|
__func__, status);
|
|
return;
|
|
default:
|
|
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
|
|
__func__, status);
|
|
goto exit;
|
|
}
|
|
|
|
usb_serial_debug_data(debug, &port->dev, __func__,
|
|
urb->actual_length, urb->transfer_buffer);
|
|
|
|
pl2303_update_line_status(port, data, actual_length);
|
|
|
|
exit:
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (retval)
|
|
dev_err(&port->dev,
|
|
"%s - usb_submit_urb failed with result %d\n",
|
|
__func__, retval);
|
|
}
|
|
|
|
static void pl2303_process_read_urb(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
struct pl2303_private *priv = usb_get_serial_port_data(port);
|
|
struct tty_struct *tty;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
char tty_flag = TTY_NORMAL;
|
|
unsigned long flags;
|
|
u8 line_status;
|
|
int i;
|
|
|
|
/* update line status */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
line_status = priv->line_status;
|
|
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
wake_up_interruptible(&priv->delta_msr_wait);
|
|
|
|
if (!urb->actual_length)
|
|
return;
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
if (!tty)
|
|
return;
|
|
|
|
/* break takes precedence over parity, */
|
|
/* which takes precedence over framing errors */
|
|
if (line_status & UART_BREAK_ERROR)
|
|
tty_flag = TTY_BREAK;
|
|
else if (line_status & UART_PARITY_ERROR)
|
|
tty_flag = TTY_PARITY;
|
|
else if (line_status & UART_FRAME_ERROR)
|
|
tty_flag = TTY_FRAME;
|
|
dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
|
|
|
|
/* overrun is special, not associated with a char */
|
|
if (line_status & UART_OVERRUN_ERROR)
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
|
|
if (port->port.console && port->sysrq) {
|
|
for (i = 0; i < urb->actual_length; ++i)
|
|
if (!usb_serial_handle_sysrq_char(port, data[i]))
|
|
tty_insert_flip_char(tty, data[i], tty_flag);
|
|
} else {
|
|
tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
|
|
urb->actual_length);
|
|
}
|
|
|
|
tty_flip_buffer_push(tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
|
|
/* All of the device info needed for the PL2303 SIO serial converter */
|
|
static struct usb_serial_driver pl2303_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "pl2303",
|
|
},
|
|
.id_table = id_table,
|
|
.num_ports = 1,
|
|
.bulk_in_size = 256,
|
|
.bulk_out_size = 256,
|
|
.open = pl2303_open,
|
|
.close = pl2303_close,
|
|
.dtr_rts = pl2303_dtr_rts,
|
|
.carrier_raised = pl2303_carrier_raised,
|
|
.ioctl = pl2303_ioctl,
|
|
.break_ctl = pl2303_break_ctl,
|
|
.set_termios = pl2303_set_termios,
|
|
.tiocmget = pl2303_tiocmget,
|
|
.tiocmset = pl2303_tiocmset,
|
|
.process_read_urb = pl2303_process_read_urb,
|
|
.read_int_callback = pl2303_read_int_callback,
|
|
.attach = pl2303_startup,
|
|
.release = pl2303_release,
|
|
};
|
|
|
|
static struct usb_serial_driver * const serial_drivers[] = {
|
|
&pl2303_device, NULL
|
|
};
|
|
|
|
module_usb_serial_driver(serial_drivers, id_table);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|
|
|