mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 21:36:42 +07:00
f0b5c2c963
This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - (deprecated) extcon_get_cable_state_() -> extcon_get_state() Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
288 lines
6.6 KiB
C
288 lines
6.6 KiB
C
/**
|
|
* Copyright (C) 2016 Linaro Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/ulpi/driver.h>
|
|
#include <linux/ulpi/regs.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/extcon.h>
|
|
#include <linux/notifier.h>
|
|
|
|
#define ULPI_PWR_CLK_MNG_REG 0x88
|
|
# define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
|
|
|
|
#define ULPI_MISC_A 0x96
|
|
# define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
|
|
# define ULPI_MISC_A_VBUSVLDEXT BIT(0)
|
|
|
|
|
|
struct ulpi_seq {
|
|
u8 addr;
|
|
u8 val;
|
|
};
|
|
|
|
struct qcom_usb_hs_phy {
|
|
struct ulpi *ulpi;
|
|
struct phy *phy;
|
|
struct clk *ref_clk;
|
|
struct clk *sleep_clk;
|
|
struct regulator *v1p8;
|
|
struct regulator *v3p3;
|
|
struct reset_control *reset;
|
|
struct ulpi_seq *init_seq;
|
|
struct extcon_dev *vbus_edev;
|
|
struct notifier_block vbus_notify;
|
|
};
|
|
|
|
static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode)
|
|
{
|
|
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
|
|
u8 addr;
|
|
int ret;
|
|
|
|
if (!uphy->vbus_edev) {
|
|
u8 val = 0;
|
|
|
|
switch (mode) {
|
|
case PHY_MODE_USB_OTG:
|
|
case PHY_MODE_USB_HOST:
|
|
val |= ULPI_INT_IDGRD;
|
|
case PHY_MODE_USB_DEVICE:
|
|
val |= ULPI_INT_SESS_VALID;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_RISE, val);
|
|
if (ret)
|
|
return ret;
|
|
ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_FALL, val);
|
|
} else {
|
|
switch (mode) {
|
|
case PHY_MODE_USB_OTG:
|
|
case PHY_MODE_USB_DEVICE:
|
|
addr = ULPI_SET(ULPI_MISC_A);
|
|
break;
|
|
case PHY_MODE_USB_HOST:
|
|
addr = ULPI_CLR(ULPI_MISC_A);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ulpi_write(uphy->ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG),
|
|
ULPI_PWR_OTG_COMP_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
ret = ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXTSEL);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event,
|
|
void *ptr)
|
|
{
|
|
struct qcom_usb_hs_phy *uphy;
|
|
u8 addr;
|
|
|
|
uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify);
|
|
|
|
if (event)
|
|
addr = ULPI_SET(ULPI_MISC_A);
|
|
else
|
|
addr = ULPI_CLR(ULPI_MISC_A);
|
|
|
|
return ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXT);
|
|
}
|
|
|
|
static int qcom_usb_hs_phy_power_on(struct phy *phy)
|
|
{
|
|
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
|
|
struct ulpi *ulpi = uphy->ulpi;
|
|
const struct ulpi_seq *seq;
|
|
int ret, state;
|
|
|
|
ret = clk_prepare_enable(uphy->ref_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(uphy->sleep_clk);
|
|
if (ret)
|
|
goto err_sleep;
|
|
|
|
ret = regulator_set_load(uphy->v1p8, 50000);
|
|
if (ret < 0)
|
|
goto err_1p8;
|
|
|
|
ret = regulator_enable(uphy->v1p8);
|
|
if (ret)
|
|
goto err_1p8;
|
|
|
|
ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000,
|
|
3300000);
|
|
if (ret)
|
|
goto err_3p3;
|
|
|
|
ret = regulator_set_load(uphy->v3p3, 50000);
|
|
if (ret < 0)
|
|
goto err_3p3;
|
|
|
|
ret = regulator_enable(uphy->v3p3);
|
|
if (ret)
|
|
goto err_3p3;
|
|
|
|
for (seq = uphy->init_seq; seq->addr; seq++) {
|
|
ret = ulpi_write(ulpi, ULPI_EXT_VENDOR_SPECIFIC + seq->addr,
|
|
seq->val);
|
|
if (ret)
|
|
goto err_ulpi;
|
|
}
|
|
|
|
if (uphy->reset) {
|
|
ret = reset_control_reset(uphy->reset);
|
|
if (ret)
|
|
goto err_ulpi;
|
|
}
|
|
|
|
if (uphy->vbus_edev) {
|
|
state = extcon_get_state(uphy->vbus_edev, EXTCON_USB);
|
|
/* setup initial state */
|
|
qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
|
|
uphy->vbus_edev);
|
|
ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
|
|
EXTCON_USB, &uphy->vbus_notify);
|
|
if (ret)
|
|
goto err_ulpi;
|
|
}
|
|
|
|
return 0;
|
|
err_ulpi:
|
|
regulator_disable(uphy->v3p3);
|
|
err_3p3:
|
|
regulator_disable(uphy->v1p8);
|
|
err_1p8:
|
|
clk_disable_unprepare(uphy->sleep_clk);
|
|
err_sleep:
|
|
clk_disable_unprepare(uphy->ref_clk);
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_usb_hs_phy_power_off(struct phy *phy)
|
|
{
|
|
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
|
|
|
|
regulator_disable(uphy->v3p3);
|
|
regulator_disable(uphy->v1p8);
|
|
clk_disable_unprepare(uphy->sleep_clk);
|
|
clk_disable_unprepare(uphy->ref_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops qcom_usb_hs_phy_ops = {
|
|
.power_on = qcom_usb_hs_phy_power_on,
|
|
.power_off = qcom_usb_hs_phy_power_off,
|
|
.set_mode = qcom_usb_hs_phy_set_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int qcom_usb_hs_phy_probe(struct ulpi *ulpi)
|
|
{
|
|
struct qcom_usb_hs_phy *uphy;
|
|
struct phy_provider *p;
|
|
struct clk *clk;
|
|
struct regulator *reg;
|
|
struct reset_control *reset;
|
|
int size;
|
|
int ret;
|
|
|
|
uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL);
|
|
if (!uphy)
|
|
return -ENOMEM;
|
|
ulpi_set_drvdata(ulpi, uphy);
|
|
uphy->ulpi = ulpi;
|
|
|
|
size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq");
|
|
if (size < 0)
|
|
size = 0;
|
|
uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1,
|
|
sizeof(*uphy->init_seq), GFP_KERNEL);
|
|
if (!uphy->init_seq)
|
|
return -ENOMEM;
|
|
ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq",
|
|
(u8 *)uphy->init_seq, size);
|
|
if (ret && size)
|
|
return ret;
|
|
/* NUL terminate */
|
|
uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0;
|
|
|
|
uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref");
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep");
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8");
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3");
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por");
|
|
if (IS_ERR(reset)) {
|
|
if (PTR_ERR(reset) == -EPROBE_DEFER)
|
|
return PTR_ERR(reset);
|
|
uphy->reset = NULL;
|
|
}
|
|
|
|
uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node,
|
|
&qcom_usb_hs_phy_ops);
|
|
if (IS_ERR(uphy->phy))
|
|
return PTR_ERR(uphy->phy);
|
|
|
|
uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0);
|
|
if (IS_ERR(uphy->vbus_edev)) {
|
|
if (PTR_ERR(uphy->vbus_edev) != -ENODEV)
|
|
return PTR_ERR(uphy->vbus_edev);
|
|
uphy->vbus_edev = NULL;
|
|
}
|
|
|
|
uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier;
|
|
phy_set_drvdata(uphy->phy, uphy);
|
|
|
|
p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate);
|
|
return PTR_ERR_OR_ZERO(p);
|
|
}
|
|
|
|
static const struct of_device_id qcom_usb_hs_phy_match[] = {
|
|
{ .compatible = "qcom,usb-hs-phy", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match);
|
|
|
|
static struct ulpi_driver qcom_usb_hs_phy_driver = {
|
|
.probe = qcom_usb_hs_phy_probe,
|
|
.driver = {
|
|
.name = "qcom_usb_hs_phy",
|
|
.of_match_table = qcom_usb_hs_phy_match,
|
|
},
|
|
};
|
|
module_ulpi_driver(qcom_usb_hs_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Qualcomm USB HS phy");
|
|
MODULE_LICENSE("GPL v2");
|