mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
49adc0cacb
The ST Micro-specific busy detection was made after the assumption that only this variant supports busy detection. So when doing busy detection, the host immediately tries to use some ST-specific register bits. Since the qualcomm variant also supports some busy detection schemes, encapsulate the variant flags better in the variant struct and prepare to add more variants by just providing some bitmasks to the logic. Put the entire busy detection logic within an if()-clause in the mmci_cmd_irq() function so the code is only executed when busy detection is enabled, and so that it is kept in (almost) one place, and add comments describing what is going on so the code can be understood. Tested on the Ux500 by introducing some prints in the busy detection path and noticing how the IRQ is enabled, used and disabled successfully. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
255 lines
7.7 KiB
C
255 lines
7.7 KiB
C
/*
|
|
* linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
|
|
*
|
|
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#define MMCIPOWER 0x000
|
|
#define MCI_PWR_OFF 0x00
|
|
#define MCI_PWR_UP 0x02
|
|
#define MCI_PWR_ON 0x03
|
|
#define MCI_OD (1 << 6)
|
|
#define MCI_ROD (1 << 7)
|
|
/*
|
|
* The ST Micro version does not have ROD and reuse the voltage registers for
|
|
* direction settings.
|
|
*/
|
|
#define MCI_ST_DATA2DIREN (1 << 2)
|
|
#define MCI_ST_CMDDIREN (1 << 3)
|
|
#define MCI_ST_DATA0DIREN (1 << 4)
|
|
#define MCI_ST_DATA31DIREN (1 << 5)
|
|
#define MCI_ST_FBCLKEN (1 << 7)
|
|
#define MCI_ST_DATA74DIREN (1 << 8)
|
|
|
|
#define MMCICLOCK 0x004
|
|
#define MCI_CLK_ENABLE (1 << 8)
|
|
#define MCI_CLK_PWRSAVE (1 << 9)
|
|
#define MCI_CLK_BYPASS (1 << 10)
|
|
#define MCI_4BIT_BUS (1 << 11)
|
|
/*
|
|
* 8bit wide buses, hardware flow contronl, negative edges and clock inversion
|
|
* supported in ST Micro U300 and Ux500 versions
|
|
*/
|
|
#define MCI_ST_8BIT_BUS (1 << 12)
|
|
#define MCI_ST_U300_HWFCEN (1 << 13)
|
|
#define MCI_ST_UX500_NEG_EDGE (1 << 13)
|
|
#define MCI_ST_UX500_HWFCEN (1 << 14)
|
|
#define MCI_ST_UX500_CLK_INV (1 << 15)
|
|
/* Modified PL180 on Versatile Express platform */
|
|
#define MCI_ARM_HWFCEN (1 << 12)
|
|
|
|
/* Modified on Qualcomm Integrations */
|
|
#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11))
|
|
#define MCI_QCOM_CLK_FLOWENA BIT(12)
|
|
#define MCI_QCOM_CLK_INVERTOUT BIT(13)
|
|
|
|
/* select in latch data and command in */
|
|
#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15)
|
|
#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15))
|
|
|
|
#define MMCIARGUMENT 0x008
|
|
|
|
/* The command register controls the Command Path State Machine (CPSM) */
|
|
#define MMCICOMMAND 0x00c
|
|
#define MCI_CPSM_RESPONSE BIT(6)
|
|
#define MCI_CPSM_LONGRSP BIT(7)
|
|
#define MCI_CPSM_INTERRUPT BIT(8)
|
|
#define MCI_CPSM_PENDING BIT(9)
|
|
#define MCI_CPSM_ENABLE BIT(10)
|
|
/* Command register flag extenstions in the ST Micro versions */
|
|
#define MCI_CPSM_ST_SDIO_SUSP BIT(11)
|
|
#define MCI_CPSM_ST_ENCMD_COMPL BIT(12)
|
|
#define MCI_CPSM_ST_NIEN BIT(13)
|
|
#define MCI_CPSM_ST_CE_ATACMD BIT(14)
|
|
/* Command register flag extensions in the Qualcomm versions */
|
|
#define MCI_CPSM_QCOM_PROGENA BIT(11)
|
|
#define MCI_CPSM_QCOM_DATCMD BIT(12)
|
|
#define MCI_CPSM_QCOM_MCIABORT BIT(13)
|
|
#define MCI_CPSM_QCOM_CCSENABLE BIT(14)
|
|
#define MCI_CPSM_QCOM_CCSDISABLE BIT(15)
|
|
#define MCI_CPSM_QCOM_AUTO_CMD19 BIT(16)
|
|
#define MCI_CPSM_QCOM_AUTO_CMD21 BIT(21)
|
|
|
|
#define MMCIRESPCMD 0x010
|
|
#define MMCIRESPONSE0 0x014
|
|
#define MMCIRESPONSE1 0x018
|
|
#define MMCIRESPONSE2 0x01c
|
|
#define MMCIRESPONSE3 0x020
|
|
#define MMCIDATATIMER 0x024
|
|
#define MMCIDATALENGTH 0x028
|
|
|
|
/* The data control register controls the Data Path State Machine (DPSM) */
|
|
#define MMCIDATACTRL 0x02c
|
|
#define MCI_DPSM_ENABLE BIT(0)
|
|
#define MCI_DPSM_DIRECTION BIT(1)
|
|
#define MCI_DPSM_MODE BIT(2)
|
|
#define MCI_DPSM_DMAENABLE BIT(3)
|
|
#define MCI_DPSM_BLOCKSIZE BIT(4)
|
|
/* Control register extensions in the ST Micro U300 and Ux500 versions */
|
|
#define MCI_DPSM_ST_RWSTART BIT(8)
|
|
#define MCI_DPSM_ST_RWSTOP BIT(9)
|
|
#define MCI_DPSM_ST_RWMOD BIT(10)
|
|
#define MCI_DPSM_ST_SDIOEN BIT(11)
|
|
/* Control register extensions in the ST Micro Ux500 versions */
|
|
#define MCI_DPSM_ST_DMAREQCTL BIT(12)
|
|
#define MCI_DPSM_ST_DBOOTMODEEN BIT(13)
|
|
#define MCI_DPSM_ST_BUSYMODE BIT(14)
|
|
#define MCI_DPSM_ST_DDRMODE BIT(15)
|
|
/* Control register extensions in the Qualcomm versions */
|
|
#define MCI_DPSM_QCOM_DATA_PEND BIT(17)
|
|
#define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20)
|
|
|
|
#define MMCIDATACNT 0x030
|
|
#define MMCISTATUS 0x034
|
|
#define MCI_CMDCRCFAIL (1 << 0)
|
|
#define MCI_DATACRCFAIL (1 << 1)
|
|
#define MCI_CMDTIMEOUT (1 << 2)
|
|
#define MCI_DATATIMEOUT (1 << 3)
|
|
#define MCI_TXUNDERRUN (1 << 4)
|
|
#define MCI_RXOVERRUN (1 << 5)
|
|
#define MCI_CMDRESPEND (1 << 6)
|
|
#define MCI_CMDSENT (1 << 7)
|
|
#define MCI_DATAEND (1 << 8)
|
|
#define MCI_STARTBITERR (1 << 9)
|
|
#define MCI_DATABLOCKEND (1 << 10)
|
|
#define MCI_CMDACTIVE (1 << 11)
|
|
#define MCI_TXACTIVE (1 << 12)
|
|
#define MCI_RXACTIVE (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTY (1 << 14)
|
|
#define MCI_RXFIFOHALFFULL (1 << 15)
|
|
#define MCI_TXFIFOFULL (1 << 16)
|
|
#define MCI_RXFIFOFULL (1 << 17)
|
|
#define MCI_TXFIFOEMPTY (1 << 18)
|
|
#define MCI_RXFIFOEMPTY (1 << 19)
|
|
#define MCI_TXDATAAVLBL (1 << 20)
|
|
#define MCI_RXDATAAVLBL (1 << 21)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOIT (1 << 22)
|
|
#define MCI_ST_CEATAEND (1 << 23)
|
|
#define MCI_ST_CARDBUSY (1 << 24)
|
|
|
|
#define MMCICLEAR 0x038
|
|
#define MCI_CMDCRCFAILCLR (1 << 0)
|
|
#define MCI_DATACRCFAILCLR (1 << 1)
|
|
#define MCI_CMDTIMEOUTCLR (1 << 2)
|
|
#define MCI_DATATIMEOUTCLR (1 << 3)
|
|
#define MCI_TXUNDERRUNCLR (1 << 4)
|
|
#define MCI_RXOVERRUNCLR (1 << 5)
|
|
#define MCI_CMDRESPENDCLR (1 << 6)
|
|
#define MCI_CMDSENTCLR (1 << 7)
|
|
#define MCI_DATAENDCLR (1 << 8)
|
|
#define MCI_STARTBITERRCLR (1 << 9)
|
|
#define MCI_DATABLOCKENDCLR (1 << 10)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOITC (1 << 22)
|
|
#define MCI_ST_CEATAENDC (1 << 23)
|
|
#define MCI_ST_BUSYENDC (1 << 24)
|
|
|
|
#define MMCIMASK0 0x03c
|
|
#define MCI_CMDCRCFAILMASK (1 << 0)
|
|
#define MCI_DATACRCFAILMASK (1 << 1)
|
|
#define MCI_CMDTIMEOUTMASK (1 << 2)
|
|
#define MCI_DATATIMEOUTMASK (1 << 3)
|
|
#define MCI_TXUNDERRUNMASK (1 << 4)
|
|
#define MCI_RXOVERRUNMASK (1 << 5)
|
|
#define MCI_CMDRESPENDMASK (1 << 6)
|
|
#define MCI_CMDSENTMASK (1 << 7)
|
|
#define MCI_DATAENDMASK (1 << 8)
|
|
#define MCI_STARTBITERRMASK (1 << 9)
|
|
#define MCI_DATABLOCKENDMASK (1 << 10)
|
|
#define MCI_CMDACTIVEMASK (1 << 11)
|
|
#define MCI_TXACTIVEMASK (1 << 12)
|
|
#define MCI_RXACTIVEMASK (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
|
|
#define MCI_RXFIFOHALFFULLMASK (1 << 15)
|
|
#define MCI_TXFIFOFULLMASK (1 << 16)
|
|
#define MCI_RXFIFOFULLMASK (1 << 17)
|
|
#define MCI_TXFIFOEMPTYMASK (1 << 18)
|
|
#define MCI_RXFIFOEMPTYMASK (1 << 19)
|
|
#define MCI_TXDATAAVLBLMASK (1 << 20)
|
|
#define MCI_RXDATAAVLBLMASK (1 << 21)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOITMASK (1 << 22)
|
|
#define MCI_ST_CEATAENDMASK (1 << 23)
|
|
#define MCI_ST_BUSYENDMASK (1 << 24)
|
|
|
|
#define MMCIMASK1 0x040
|
|
#define MMCIFIFOCNT 0x048
|
|
#define MMCIFIFO 0x080 /* to 0x0bc */
|
|
|
|
#define MCI_IRQENABLE \
|
|
(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
|
|
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
|
|
MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
|
|
|
|
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
|
|
#define MCI_IRQ1MASK \
|
|
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
|
|
MCI_TXFIFOHALFEMPTYMASK)
|
|
|
|
#define NR_SG 128
|
|
|
|
struct clk;
|
|
struct variant_data;
|
|
struct dma_chan;
|
|
|
|
struct mmci_host_next {
|
|
struct dma_async_tx_descriptor *dma_desc;
|
|
struct dma_chan *dma_chan;
|
|
s32 cookie;
|
|
};
|
|
|
|
struct mmci_host {
|
|
phys_addr_t phybase;
|
|
void __iomem *base;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
struct mmc_host *mmc;
|
|
struct clk *clk;
|
|
bool singleirq;
|
|
|
|
spinlock_t lock;
|
|
|
|
unsigned int mclk;
|
|
/* cached value of requested clk in set_ios */
|
|
unsigned int clock_cache;
|
|
unsigned int cclk;
|
|
u32 pwr_reg;
|
|
u32 pwr_reg_add;
|
|
u32 clk_reg;
|
|
u32 datactrl_reg;
|
|
u32 busy_status;
|
|
bool vqmmc_enabled;
|
|
struct mmci_platform_data *plat;
|
|
struct variant_data *variant;
|
|
|
|
u8 hw_designer;
|
|
u8 hw_revision:4;
|
|
|
|
struct timer_list timer;
|
|
unsigned int oldstat;
|
|
|
|
/* pio stuff */
|
|
struct sg_mapping_iter sg_miter;
|
|
unsigned int size;
|
|
int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
|
|
|
|
#ifdef CONFIG_DMA_ENGINE
|
|
/* DMA stuff */
|
|
struct dma_chan *dma_current;
|
|
struct dma_chan *dma_rx_channel;
|
|
struct dma_chan *dma_tx_channel;
|
|
struct dma_async_tx_descriptor *dma_desc_current;
|
|
struct mmci_host_next next_data;
|
|
|
|
#define dma_inprogress(host) ((host)->dma_current)
|
|
#else
|
|
#define dma_inprogress(host) (0)
|
|
#endif
|
|
};
|
|
|