linux_dsm_epyc7002/arch/arm/boot/dts/dra7.dtsi
Kishon Vijay Abraham I b5acec09e2 ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable
PCIe x2 lane mode are added here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-09 07:59:12 -07:00

768 lines
20 KiB
Plaintext

/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* Based on "omap4.dtsi"
*/
#include <dt-bindings/bus/ti-sysc.h>
#include <dt-bindings/clock/dra7.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/dra.h>
#include <dt-bindings/clock/dra7.h>
#define MAX_SOURCES 400
/ {
#address-cells = <2>;
#size-cells = <2>;
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
chosen { };
aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
i2c4 = &i2c5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
serial9 = &uart10;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
d_can0 = &dcan1;
d_can1 = &dcan2;
spi0 = &qspi;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48211000 0x0 0x1000>,
<0x0 0x48212000 0x0 0x2000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48281000 0x0 0x1000>;
interrupt-parent = <&gic>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
operating-points-v2 = <&cpu0_opp_table>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
/* cooling options */
#cooling-cells = <2>; /* min followed by max */
vbb-supply = <&abb_mpu>;
};
};
cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_wkup>;
opp_nom-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1060000 850000 1150000>,
<1060000 850000 1150000>;
opp-supported-hw = <0xFF 0x01>;
opp-suspend;
};
opp_od-1176000000 {
opp-hz = /bits/ 64 <1176000000>;
opp-microvolt = <1160000 885000 1160000>,
<1160000 885000 1160000>;
opp-supported-hw = <0xFF 0x02>;
};
opp_high@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1210000 950000 1250000>,
<1210000 950000 1250000>;
opp-supported-hw = <0xFF 0x04>;
};
};
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu";
};
};
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
* Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
ocp {
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0xc0000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
l4_cfg: interconnect@4a000000 {
};
l4_wkup: interconnect@4ae00000 {
};
l4_per1: interconnect@48000000 {
};
l4_per2: interconnect@48400000 {
};
l4_per3: interconnect@48800000 {
};
axi@0 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
*/
pcie1_rc: pcie@51000000 {
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <0>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 1>,
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
pcie1_ep: pcie_ep@51000000 {
reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
interrupts = <0 232 0x4>;
num-lanes = <1>;
num-ib-windows = <4>;
num-ob-windows = <16>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
status = "disabled";
};
};
axi@1 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
pcie2_rc: pcie@51800000 {
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 355 0x4>, <0 356 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <1>;
ti,hwmods = "pcie2";
phys = <&pcie2_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2_intc 1>,
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
ocmcram1: ocmcram@40300000 {
compatible = "mmio-sram";
reg = <0x40300000 0x80000>;
ranges = <0x0 0x40300000 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
/*
* This is a placeholder for an optional reserved
* region for use by secure software. The size
* of this region is not known until runtime so it
* is set as zero to either be updated to reserve
* space or left unchanged to leave all SRAM for use.
* On HS parts that that require the reserved region
* either the bootloader can update the size to
* the required amount or the node can be overridden
* from the board dts file for the secure platform.
*/
sram-hs@0 {
compatible = "ti,secure-ram";
reg = <0x0 0x0>;
};
};
/*
* NOTE: ocmcram2 and ocmcram3 are not available on all
* DRA7xx and AM57xx variants. Confirm availability in
* the data manual for the exact part number in use
* before enabling these nodes in the board dts file.
*/
ocmcram2: ocmcram@40400000 {
status = "disabled";
compatible = "mmio-sram";
reg = <0x40400000 0x100000>;
ranges = <0x0 0x40400000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
};
ocmcram3: ocmcram@40500000 {
status = "disabled";
compatible = "mmio-sram";
reg = <0x40500000 0x100000>;
ranges = <0x0 0x40500000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
};
bandgap: bandgap@4a0021e0 {
reg = <0x4a0021e0 0xc
0x4a00232c 0xc
0x4a002380 0x2c
0x4a0023C0 0x3c
0x4a002564 0x8
0x4a002574 0x50>;
compatible = "ti,dra752-bandgap";
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
dsp1_system: dsp_system@40d00000 {
compatible = "syscon";
reg = <0x40d00000 0x100>;
};
dra7_iodelay_core: padconf@4844a000 {
compatible = "ti,dra7-iodelay";
reg = <0x4844a000 0x0d1c>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <2>;
};
edma: edma@43300000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
reg = <0x43300000 0x100000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
/*
* memcpy is disabled, can be enabled with:
* ti,edma-memcpy-channels = <20 21>;
* for example. Note that these channels need to be
* masked in the xbar as well.
*/
};
edma_tptc0: tptc@43400000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc0";
reg = <0x43400000 0x100000>;
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
edma_tptc1: tptc@43500000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc1";
reg = <0x43500000 0x100000>;
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmm";
};
mmu0_dsp1: mmu@40d01000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x40d01000 0x100>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu0_dsp1";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp1_system 0x0>;
status = "disabled";
};
mmu1_dsp1: mmu@40d02000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x40d02000 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu1_dsp1";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp1_system 0x1>;
status = "disabled";
};
mmu_ipu1: mmu@58882000 {
compatible = "ti,dra7-iommu";
reg = <0x58882000 0x100>;
interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu1";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
status = "disabled";
};
mmu_ipu2: mmu@55082000 {
compatible = "ti,dra7-iommu";
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu2";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
status = "disabled";
};
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x80>;
/* LDOVBBMPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBMPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1060000 0 0x0 0 0x02000000 0x01F00000
1160000 0 0x4 0 0x02000000 0x01F00000
1210000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_ivahd: regulator-abb-ivahd {
compatible = "ti,abb-v3";
regulator-name = "abb_ivahd";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x40000000>;
/* LDOVBBIVA_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBIVA_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_dspeve: regulator-abb-dspeve {
compatible = "ti,abb-v3";
regulator-name = "abb_dspeve";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x20000000>;
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBDSPEVE_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_gpu: regulator-abb-gpu {
compatible = "ti,abb-v3";
regulator-name = "abb_gpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x10000000>;
/* LDOVBBGPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBGPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1090000 0 0x0 0 0x02000000 0x01F00000
1210000 0 0x4 0 0x02000000 0x01F00000
1280000 0 0x8 0 0x02000000 0x01F00000
>;
};
qspi: spi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>,
<0x5c000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
syscon-chipselects = <&scm_conf 0x558>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
clock-names = "fck";
num-cs = <4>;
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
/* OCP2SCP3 */
sata: sata@4a141100 {
compatible = "snps,dwc-ahci";
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
/* OCP2SCP1 */
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
interrupt-controller;
interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
dss: dss@58000000 {
compatible = "ti,dra7-dss";
/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
status = "disabled";
ti,hwmods = "dss_core";
/* CTRL_CORE_DSS_PLL_CONTROL */
syscon-pll-ctrl = <&scm_conf 0x538>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@58001000 {
compatible = "ti,dra7-dispc";
reg = <0x58001000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dss_dispc";
clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
/* CTRL_CORE_SMA_SW_1 */
syscon-pol = <&scm_conf 0x534>;
};
hdmi: encoder@58060000 {
compatible = "ti,dra7-hdmi";
reg = <0x58040000 0x200>,
<0x58040200 0x80>,
<0x58040300 0x80>,
<0x58060000 0x19000>;
reg-names = "wp", "pll", "phy", "core";
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_hdmi";
clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
<&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
dmas = <&sdma_xbar 76>;
dma-names = "audio_tx";
};
};
aes1: aes@4b500000 {
compatible = "ti,omap4-aes";
ti,hwmods = "aes1";
reg = <0x4b500000 0xa0>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
dma-names = "tx", "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};
aes2: aes@4b700000 {
compatible = "ti,omap4-aes";
ti,hwmods = "aes2";
reg = <0x4b700000 0xa0>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
dma-names = "tx", "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};
des: des@480a5000 {
compatible = "ti,omap4-des";
ti,hwmods = "des";
reg = <0x480a5000 0xa0>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
dma-names = "tx", "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};
sham: sham@53100000 {
compatible = "ti,omap5-sham";
ti,hwmods = "sham";
reg = <0x4b101000 0x300>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 119 0>;
dma-names = "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};
opp_supply_mpu: opp-supply@4a003b20 {
compatible = "ti,omap5-opp-supply";
reg = <0x4a003b20 0xc>;
ti,efuse-settings = <
/* uV offset */
1060000 0x0
1160000 0x4
1210000 0x8
>;
ti,absolute-max-voltage-uv = <1500000>;
};
};
thermal_zones: thermal-zones {
#include "omap4-cpu-thermal.dtsi"
#include "omap5-gpu-thermal.dtsi"
#include "omap5-core-thermal.dtsi"
#include "dra7-dspeve-thermal.dtsi"
#include "dra7-iva-thermal.dtsi"
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
coefficients = <0 2000>;
};
&gpu_thermal {
coefficients = <0 2000>;
};
&core_thermal {
coefficients = <0 2000>;
};
&dspeve_thermal {
coefficients = <0 2000>;
};
&iva_thermal {
coefficients = <0 2000>;
};
&cpu_crit {
temperature = <120000>; /* milli Celsius */
};
&core_crit {
temperature = <120000>; /* milli Celsius */
};
&gpu_crit {
temperature = <120000>; /* milli Celsius */
};
&dspeve_crit {
temperature = <120000>; /* milli Celsius */
};
&iva_crit {
temperature = <120000>; /* milli Celsius */
};
#include "dra7-l4.dtsi"
#include "dra7xx-clocks.dtsi"