mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 16:05:34 +07:00
f1705ec197
Currently, all ipv6 addresses are flushed when the interface is configured
down, including global, static addresses:
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
inet6 2100:1::2/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ip link set dev eth1 down
$ ip -6 addr show dev eth1
<< nothing; all addresses have been flushed>>
Add a new sysctl to make this behavior optional. The new setting defaults to
flush all addresses to maintain backwards compatibility. When the set global
addresses with no expire times are not flushed on an admin down. The sysctl
is per-interface or system-wide for all interfaces
$ sysctl -w net.ipv6.conf.eth1.keep_addr_on_down=1
or
$ sysctl -w net.ipv6.conf.all.keep_addr_on_down=1
Will keep addresses on eth1 on an admin down.
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
inet6 2100:1::2/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ip link set dev eth1 down
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST> mtu 1500 state DOWN qlen 1000
inet6 2100:1::2/120 scope global tentative
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link tentative
valid_lft forever preferred_lft forever
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
185 lines
3.6 KiB
C
185 lines
3.6 KiB
C
#ifndef _UAPI_IPV6_H
|
|
#define _UAPI_IPV6_H
|
|
|
|
#include <linux/libc-compat.h>
|
|
#include <linux/types.h>
|
|
#include <linux/in6.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
/* The latest drafts declared increase in minimal mtu up to 1280. */
|
|
|
|
#define IPV6_MIN_MTU 1280
|
|
|
|
/*
|
|
* Advanced API
|
|
* source interface/address selection, source routing, etc...
|
|
* *under construction*
|
|
*/
|
|
|
|
#if __UAPI_DEF_IN6_PKTINFO
|
|
struct in6_pktinfo {
|
|
struct in6_addr ipi6_addr;
|
|
int ipi6_ifindex;
|
|
};
|
|
#endif
|
|
|
|
#if __UAPI_DEF_IP6_MTUINFO
|
|
struct ip6_mtuinfo {
|
|
struct sockaddr_in6 ip6m_addr;
|
|
__u32 ip6m_mtu;
|
|
};
|
|
#endif
|
|
|
|
struct in6_ifreq {
|
|
struct in6_addr ifr6_addr;
|
|
__u32 ifr6_prefixlen;
|
|
int ifr6_ifindex;
|
|
};
|
|
|
|
#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
|
|
#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
|
|
#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
|
|
|
|
/*
|
|
* routing header
|
|
*/
|
|
struct ipv6_rt_hdr {
|
|
__u8 nexthdr;
|
|
__u8 hdrlen;
|
|
__u8 type;
|
|
__u8 segments_left;
|
|
|
|
/*
|
|
* type specific data
|
|
* variable length field
|
|
*/
|
|
};
|
|
|
|
|
|
struct ipv6_opt_hdr {
|
|
__u8 nexthdr;
|
|
__u8 hdrlen;
|
|
/*
|
|
* TLV encoded option data follows.
|
|
*/
|
|
} __attribute__((packed)); /* required for some archs */
|
|
|
|
#define ipv6_destopt_hdr ipv6_opt_hdr
|
|
#define ipv6_hopopt_hdr ipv6_opt_hdr
|
|
|
|
/* Router Alert option values (RFC2711) */
|
|
#define IPV6_OPT_ROUTERALERT_MLD 0x0000 /* MLD(RFC2710) */
|
|
|
|
/*
|
|
* routing header type 0 (used in cmsghdr struct)
|
|
*/
|
|
|
|
struct rt0_hdr {
|
|
struct ipv6_rt_hdr rt_hdr;
|
|
__u32 reserved;
|
|
struct in6_addr addr[0];
|
|
|
|
#define rt0_type rt_hdr.type
|
|
};
|
|
|
|
/*
|
|
* routing header type 2
|
|
*/
|
|
|
|
struct rt2_hdr {
|
|
struct ipv6_rt_hdr rt_hdr;
|
|
__u32 reserved;
|
|
struct in6_addr addr;
|
|
|
|
#define rt2_type rt_hdr.type
|
|
};
|
|
|
|
/*
|
|
* home address option in destination options header
|
|
*/
|
|
|
|
struct ipv6_destopt_hao {
|
|
__u8 type;
|
|
__u8 length;
|
|
struct in6_addr addr;
|
|
} __attribute__((packed));
|
|
|
|
/*
|
|
* IPv6 fixed header
|
|
*
|
|
* BEWARE, it is incorrect. The first 4 bits of flow_lbl
|
|
* are glued to priority now, forming "class".
|
|
*/
|
|
|
|
struct ipv6hdr {
|
|
#if defined(__LITTLE_ENDIAN_BITFIELD)
|
|
__u8 priority:4,
|
|
version:4;
|
|
#elif defined(__BIG_ENDIAN_BITFIELD)
|
|
__u8 version:4,
|
|
priority:4;
|
|
#else
|
|
#error "Please fix <asm/byteorder.h>"
|
|
#endif
|
|
__u8 flow_lbl[3];
|
|
|
|
__be16 payload_len;
|
|
__u8 nexthdr;
|
|
__u8 hop_limit;
|
|
|
|
struct in6_addr saddr;
|
|
struct in6_addr daddr;
|
|
};
|
|
|
|
|
|
/* index values for the variables in ipv6_devconf */
|
|
enum {
|
|
DEVCONF_FORWARDING = 0,
|
|
DEVCONF_HOPLIMIT,
|
|
DEVCONF_MTU6,
|
|
DEVCONF_ACCEPT_RA,
|
|
DEVCONF_ACCEPT_REDIRECTS,
|
|
DEVCONF_AUTOCONF,
|
|
DEVCONF_DAD_TRANSMITS,
|
|
DEVCONF_RTR_SOLICITS,
|
|
DEVCONF_RTR_SOLICIT_INTERVAL,
|
|
DEVCONF_RTR_SOLICIT_DELAY,
|
|
DEVCONF_USE_TEMPADDR,
|
|
DEVCONF_TEMP_VALID_LFT,
|
|
DEVCONF_TEMP_PREFERED_LFT,
|
|
DEVCONF_REGEN_MAX_RETRY,
|
|
DEVCONF_MAX_DESYNC_FACTOR,
|
|
DEVCONF_MAX_ADDRESSES,
|
|
DEVCONF_FORCE_MLD_VERSION,
|
|
DEVCONF_ACCEPT_RA_DEFRTR,
|
|
DEVCONF_ACCEPT_RA_PINFO,
|
|
DEVCONF_ACCEPT_RA_RTR_PREF,
|
|
DEVCONF_RTR_PROBE_INTERVAL,
|
|
DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
|
|
DEVCONF_PROXY_NDP,
|
|
DEVCONF_OPTIMISTIC_DAD,
|
|
DEVCONF_ACCEPT_SOURCE_ROUTE,
|
|
DEVCONF_MC_FORWARDING,
|
|
DEVCONF_DISABLE_IPV6,
|
|
DEVCONF_ACCEPT_DAD,
|
|
DEVCONF_FORCE_TLLAO,
|
|
DEVCONF_NDISC_NOTIFY,
|
|
DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL,
|
|
DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL,
|
|
DEVCONF_SUPPRESS_FRAG_NDISC,
|
|
DEVCONF_ACCEPT_RA_FROM_LOCAL,
|
|
DEVCONF_USE_OPTIMISTIC,
|
|
DEVCONF_ACCEPT_RA_MTU,
|
|
DEVCONF_STABLE_SECRET,
|
|
DEVCONF_USE_OIF_ADDRS_ONLY,
|
|
DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT,
|
|
DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN,
|
|
DEVCONF_DROP_UNICAST_IN_L2_MULTICAST,
|
|
DEVCONF_DROP_UNSOLICITED_NA,
|
|
DEVCONF_KEEP_ADDR_ON_DOWN,
|
|
DEVCONF_MAX
|
|
};
|
|
|
|
|
|
#endif /* _UAPI_IPV6_H */
|