AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f604757618
linux_dsm_epyc7002/drivers/net/ethernet/alacritech/slic.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

577 lines
16 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _SLIC_H
#define _SLIC_H
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/spinlock_types.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/list.h>
#include <linux/u64_stats_sync.h>
#define SLIC_VGBSTAT_XPERR 0x40000000
#define SLIC_VGBSTAT_XERRSHFT 25
#define SLIC_VGBSTAT_XCSERR 0x23
#define SLIC_VGBSTAT_XUFLOW 0x22
#define SLIC_VGBSTAT_XHLEN 0x20
#define SLIC_VGBSTAT_NETERR 0x01000000
#define SLIC_VGBSTAT_NERRSHFT 16
#define SLIC_VGBSTAT_NERRMSK 0x1ff
#define SLIC_VGBSTAT_NCSERR 0x103
#define SLIC_VGBSTAT_NUFLOW 0x102
#define SLIC_VGBSTAT_NHLEN 0x100
#define SLIC_VGBSTAT_LNKERR 0x00000080
#define SLIC_VGBSTAT_LERRMSK 0xff
#define SLIC_VGBSTAT_LDEARLY 0x86
#define SLIC_VGBSTAT_LBOFLO 0x85
#define SLIC_VGBSTAT_LCODERR 0x84
#define SLIC_VGBSTAT_LDBLNBL 0x83
#define SLIC_VGBSTAT_LCRCERR 0x82
#define SLIC_VGBSTAT_LOFLO 0x81
#define SLIC_VGBSTAT_LUFLO 0x80
#define SLIC_IRHDDR_FLEN_MSK 0x0000ffff
#define SLIC_IRHDDR_SVALID 0x80000000
#define SLIC_IRHDDR_ERR 0x10000000
#define SLIC_VRHSTAT_802OE 0x80000000
#define SLIC_VRHSTAT_TPOFLO 0x10000000
#define SLIC_VRHSTATB_802UE 0x80000000
#define SLIC_VRHSTATB_RCVE 0x40000000
#define SLIC_VRHSTATB_BUFF 0x20000000
#define SLIC_VRHSTATB_CARRE 0x08000000
#define SLIC_VRHSTATB_LONGE 0x02000000
#define SLIC_VRHSTATB_PREA 0x01000000
#define SLIC_VRHSTATB_CRC 0x00800000
#define SLIC_VRHSTATB_DRBL 0x00400000
#define SLIC_VRHSTATB_CODE 0x00200000
#define SLIC_VRHSTATB_TPCSUM 0x00100000
#define SLIC_VRHSTATB_TPHLEN 0x00080000
#define SLIC_VRHSTATB_IPCSUM 0x00040000
#define SLIC_VRHSTATB_IPLERR 0x00020000
#define SLIC_VRHSTATB_IPHERR 0x00010000
#define SLIC_CMD_XMT_REQ 0x01
#define SLIC_CMD_TYPE_DUMB 3
#define SLIC_RESET_MAGIC 0xDEAD
#define SLIC_ICR_INT_OFF 0
#define SLIC_ICR_INT_ON 1
#define SLIC_ICR_INT_MASK 2
#define SLIC_ISR_ERR 0x80000000
#define SLIC_ISR_RCV 0x40000000
#define SLIC_ISR_CMD 0x20000000
#define SLIC_ISR_IO 0x60000000
#define SLIC_ISR_UPC 0x10000000
#define SLIC_ISR_LEVENT 0x08000000
#define SLIC_ISR_RMISS 0x02000000
#define SLIC_ISR_UPCERR 0x01000000
#define SLIC_ISR_XDROP 0x00800000
#define SLIC_ISR_UPCBSY 0x00020000
#define SLIC_ISR_PING_MASK 0x00700000
#define SLIC_ISR_UPCERR_MASK (SLIC_ISR_UPCERR | SLIC_ISR_UPCBSY)
#define SLIC_ISR_UPC_MASK (SLIC_ISR_UPC | SLIC_ISR_UPCERR_MASK)
#define SLIC_WCS_START 0x80000000
#define SLIC_WCS_COMPARE 0x40000000
#define SLIC_RCVWCS_BEGIN 0x40000000
#define SLIC_RCVWCS_FINISH 0x80000000
#define SLIC_MIICR_REG_16 0x00100000
#define SLIC_MRV_REG16_XOVERON 0x0068
#define SLIC_GIG_LINKUP 0x0001
#define SLIC_GIG_FULLDUPLEX 0x0002
#define SLIC_GIG_SPEED_MASK 0x000C
#define SLIC_GIG_SPEED_1000 0x0008
#define SLIC_GIG_SPEED_100 0x0004
#define SLIC_GIG_SPEED_10 0x0000
#define SLIC_GMCR_RESET 0x80000000
#define SLIC_GMCR_GBIT 0x20000000
#define SLIC_GMCR_FULLD 0x10000000
#define SLIC_GMCR_GAPBB_SHIFT 14
#define SLIC_GMCR_GAPR1_SHIFT 7
#define SLIC_GMCR_GAPR2_SHIFT 0
#define SLIC_GMCR_GAPBB_1000 0x60
#define SLIC_GMCR_GAPR1_1000 0x2C
#define SLIC_GMCR_GAPR2_1000 0x40
#define SLIC_GMCR_GAPBB_100 0x70
#define SLIC_GMCR_GAPR1_100 0x2C
#define SLIC_GMCR_GAPR2_100 0x40
#define SLIC_XCR_RESET 0x80000000
#define SLIC_XCR_XMTEN 0x40000000
#define SLIC_XCR_PAUSEEN 0x20000000
#define SLIC_XCR_LOADRNG 0x10000000
#define SLIC_GXCR_RESET 0x80000000
#define SLIC_GXCR_XMTEN 0x40000000
#define SLIC_GXCR_PAUSEEN 0x20000000
#define SLIC_GRCR_RESET 0x80000000
#define SLIC_GRCR_RCVEN 0x40000000
#define SLIC_GRCR_RCVALL 0x20000000
#define SLIC_GRCR_RCVBAD 0x10000000
#define SLIC_GRCR_CTLEN 0x08000000
#define SLIC_GRCR_ADDRAEN 0x02000000
#define SLIC_GRCR_HASHSIZE_SHIFT 17
#define SLIC_GRCR_HASHSIZE 14
/* Reset Register */
#define SLIC_REG_RESET 0x0000
/* Interrupt Control Register */
#define SLIC_REG_ICR 0x0008
/* Interrupt status pointer */
#define SLIC_REG_ISP 0x0010
/* Interrupt status */
#define SLIC_REG_ISR 0x0018
/* Header buffer address reg
* 31-8 - phy addr of set of contiguous hdr buffers
* 7-0 - number of buffers passed
* Buffers are 256 bytes long on 256-byte boundaries.
*/
#define SLIC_REG_HBAR 0x0020
/* Data buffer handle & address reg
* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
*/
#define SLIC_REG_DBAR 0x0028
/* Xmt Cmd buf addr regs.
* 1 per XMT interface
* 31-5 - phy addr of host command buffer
* 4-0 - length of cmd in multiples of 32 bytes
* Buffers are 32 bytes up to 512 bytes long
*/
#define SLIC_REG_CBAR 0x0030
/* Write control store */
#define SLIC_REG_WCS 0x0034
/*Response buffer address reg.
* 31-8 - phy addr of set of contiguous response buffers
* 7-0 - number of buffers passed
* Buffers are 32 bytes long on 32-byte boundaries.
*/
#define SLIC_REG_RBAR 0x0038
/* Read statistics (UPR) */
#define SLIC_REG_RSTAT 0x0040
/* Read link status */
#define SLIC_REG_LSTAT 0x0048
/* Write Mac Config */
#define SLIC_REG_WMCFG 0x0050
/* Write phy register */
#define SLIC_REG_WPHY 0x0058
/* Rcv Cmd buf addr reg */
#define SLIC_REG_RCBAR 0x0060
/* Read SLIC Config*/
#define SLIC_REG_RCONFIG 0x0068
/* Interrupt aggregation time */
#define SLIC_REG_INTAGG 0x0070
/* Write XMIT config reg */
#define SLIC_REG_WXCFG 0x0078
/* Write RCV config reg */
#define SLIC_REG_WRCFG 0x0080
/* Write rcv addr a low */
#define SLIC_REG_WRADDRAL 0x0088
/* Write rcv addr a high */
#define SLIC_REG_WRADDRAH 0x0090
/* Write rcv addr b low */
#define SLIC_REG_WRADDRBL 0x0098
/* Write rcv addr b high */
#define SLIC_REG_WRADDRBH 0x00a0
/* Low bits of mcast mask */
#define SLIC_REG_MCASTLOW 0x00a8
/* High bits of mcast mask */
#define SLIC_REG_MCASTHIGH 0x00b0
/* Ping the card */
#define SLIC_REG_PING 0x00b8
/* Dump command */
#define SLIC_REG_DUMP_CMD 0x00c0
/* Dump data pointer */
#define SLIC_REG_DUMP_DATA 0x00c8
/* Read card's pci_status register */
#define SLIC_REG_PCISTATUS 0x00d0
/* Write hostid field */
#define SLIC_REG_WRHOSTID 0x00d8
/* Put card in a low power state */
#define SLIC_REG_LOW_POWER 0x00e0
/* Force slic into quiescent state before soft reset */
#define SLIC_REG_QUIESCE 0x00e8
/* Reset interface queues */
#define SLIC_REG_RESET_IFACE 0x00f0
/* Register is only written when it has changed.
* Bits 63-32 for host i/f addrs.
*/
#define SLIC_REG_ADDR_UPPER 0x00f8
/* 64 bit Header buffer address reg */
#define SLIC_REG_HBAR64 0x0100
/* 64 bit Data buffer handle & address reg */
#define SLIC_REG_DBAR64 0x0108
/* 64 bit Xmt Cmd buf addr regs. */
#define SLIC_REG_CBAR64 0x0110
/* 64 bit Response buffer address reg.*/
#define SLIC_REG_RBAR64 0x0118
/* 64 bit Rcv Cmd buf addr reg*/
#define SLIC_REG_RCBAR64 0x0120
/* Read statistics (64 bit UPR) */
#define SLIC_REG_RSTAT64 0x0128
/* Download Gigabit RCV sequencer ucode */
#define SLIC_REG_RCV_WCS 0x0130
/* Write VlanId field */
#define SLIC_REG_WRVLANID 0x0138
/* Read Transformer info */
#define SLIC_REG_READ_XF_INFO 0x0140
/* Write Transformer info */
#define SLIC_REG_WRITE_XF_INFO 0x0148
/* Write card ticks per second */
#define SLIC_REG_TICKS_PER_SEC 0x0170
#define SLIC_REG_HOSTID 0x1554
#define PCI_VENDOR_ID_ALACRITECH 0x139A
#define PCI_DEVICE_ID_ALACRITECH_MOJAVE 0x0005
#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1 0x0005
#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1_2 0x0006
#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1F 0x0007
#define PCI_SUBDEVICE_ID_ALACRITECH_CICADA 0x0008
#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001T 0x2006
#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001F 0x2007
#define PCI_DEVICE_ID_ALACRITECH_OASIS 0x0007
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XT 0x000B
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF 0x000C
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XT 0x000D
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF 0x000E
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF 0x000F
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104ET 0x0010
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF 0x0011
#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102ET 0x0012
/* Note: power of two required for number descriptors */
#define SLIC_NUM_RX_LES 256
#define SLIC_RX_BUFF_SIZE 2048
#define SLIC_RX_BUFF_ALIGN 256
#define SLIC_RX_BUFF_HDR_SIZE 34
#define SLIC_MAX_REQ_RX_DESCS 1
#define SLIC_NUM_TX_DESCS 256
#define SLIC_TX_DESC_ALIGN 32
#define SLIC_MIN_TX_WAKEUP_DESCS 10
#define SLIC_MAX_REQ_TX_DESCS 1
#define SLIC_MAX_TX_COMPLETIONS 100
#define SLIC_NUM_STAT_DESCS 128
#define SLIC_STATS_DESC_ALIGN 256
#define SLIC_NUM_STAT_DESC_ARRAYS 4
#define SLIC_INVALID_STAT_DESC_IDX 0xffffffff
#define SLIC_NAPI_WEIGHT 64
#define SLIC_UPR_LSTAT 0
#define SLIC_UPR_CONFIG 1
#define SLIC_EEPROM_SIZE 128
#define SLIC_EEPROM_MAGIC 0xa5a5
#define SLIC_FIRMWARE_MOJAVE "slicoss/gbdownload.sys"
#define SLIC_FIRMWARE_OASIS "slicoss/oasisdownload.sys"
#define SLIC_RCV_FIRMWARE_MOJAVE "slicoss/gbrcvucode.sys"
#define SLIC_RCV_FIRMWARE_OASIS "slicoss/oasisrcvucode.sys"
#define SLIC_FIRMWARE_MIN_SIZE 64
#define SLIC_FIRMWARE_MAX_SECTIONS 3
#define SLIC_MODEL_MOJAVE 0
#define SLIC_MODEL_OASIS 1
#define SLIC_INC_STATS_COUNTER(st, counter) \
do { \
u64_stats_update_begin(&(st)->syncp); \
(st)->counter++; \
u64_stats_update_end(&(st)->syncp); \
} while (0)
#define SLIC_GET_STATS_COUNTER(newst, st, counter) \
{ \
unsigned int start; \
do { \
start = u64_stats_fetch_begin_irq(&(st)->syncp); \
newst = (st)->counter; \
} while (u64_stats_fetch_retry_irq(&(st)->syncp, start)); \
}
struct slic_upr {
dma_addr_t paddr;
unsigned int type;
struct list_head list;
};
struct slic_upr_list {
bool pending;
struct list_head list;
/* upr list lock */
spinlock_t lock;
};
/* SLIC EEPROM structure for Mojave */
struct slic_mojave_eeprom {
__le16 id; /* 00 EEPROM/FLASH Magic code 'A5A5'*/
__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
__le16 flash_size; /* 02 Flash size */
__le16 eeprom_size; /* 03 EEPROM Size */
__le16 vendor_id; /* 04 Vendor ID */
__le16 dev_id; /* 05 Device ID */
u8 rev_id; /* 06 Revision ID */
u8 class_code[3]; /* 07 Class Code */
u8 irqpin_dbg; /* 08 Debug Interrupt pin */
u8 irqpin; /* Network Interrupt Pin */
u8 min_grant; /* 09 Minimum grant */
u8 max_lat; /* Maximum Latency */
__le16 pci_stat; /* 10 PCI Status */
__le16 sub_vendor_id; /* 11 Subsystem Vendor Id */
__le16 sub_id; /* 12 Subsystem ID */
__le16 dev_id_dbg; /* 13 Debug Device Id */
__le16 ramrom; /* 14 Dram/Rom function */
__le16 dram_size2pci; /* 15 DRAM size to PCI (bytes * 64K) */
__le16 rom_size2pci; /* 16 ROM extension size to PCI (bytes * 4k) */
u8 pad[2]; /* 17 Padding */
u8 freetime; /* 18 FreeTime setting */
u8 ifctrl; /* 10-bit interface control (Mojave only) */
__le16 dram_size; /* 19 DRAM size (bytes * 64k) */
u8 mac[ETH_ALEN]; /* 20 MAC addresses */
u8 mac2[ETH_ALEN];
u8 pad2[6];
u16 dev_id2; /* Device ID for 2nd PCI function */
u8 irqpin2; /* Interrupt pin for 2nd PCI function */
u8 class_code2[3]; /* Class Code for 2nd PCI function */
u16 cfg_byte6; /* Config Byte 6 */
u16 pme_cap; /* Power Mgment capabilities */
u16 nwclk_ctrl; /* NetworkClockControls */
u8 fru_format; /* Alacritech FRU format type */
u8 fru_assembly[6]; /* Alacritech FRU information */
u8 fru_rev[2];
u8 fru_serial[14];
u8 fru_pad[3];
u8 oem_fru[28]; /* optional OEM FRU format type */
u8 pad3[4]; /* Pad to 128 bytes - includes 2 cksum bytes
* (if OEM FRU info exists) and two unusable
* bytes at the end
*/
};
/* SLIC EEPROM structure for Oasis */
struct slic_oasis_eeprom {
__le16 id; /* 00 EEPROM/FLASH Magic code 'A5A5' */
__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
__le16 spidev0_cfg; /* 02 Flash Config for SPI device 0 */
__le16 spidev1_cfg; /* 03 Flash Config for SPI device 1 */
__le16 vendor_id; /* 04 Vendor ID */
__le16 dev_id; /* 05 Device ID (function 0) */
u8 rev_id; /* 06 Revision ID */
u8 class_code0[3]; /* 07 Class Code for PCI function 0 */
u8 irqpin1; /* 08 Interrupt pin for PCI function 1*/
u8 class_code1[3]; /* 09 Class Code for PCI function 1 */
u8 irqpin2; /* 10 Interrupt pin for PCI function 2*/
u8 irqpin0; /* Interrupt pin for PCI function 0*/
u8 min_grant; /* 11 Minimum grant */
u8 max_lat; /* Maximum Latency */
__le16 sub_vendor_id; /* 12 Subsystem Vendor Id */
__le16 sub_id; /* 13 Subsystem ID */
__le16 flash_size; /* 14 Flash size (bytes / 4K) */
__le16 dram_size2pci; /* 15 DRAM size to PCI (bytes / 64K) */
__le16 rom_size2pci; /* 16 Flash (ROM extension) size to PCI
* (bytes / 4K)
*/
__le16 dev_id1; /* 17 Device Id (function 1) */
__le16 dev_id2; /* 18 Device Id (function 2) */
__le16 dev_stat_cfg; /* 19 Device Status Config Bytes 6-7 */
__le16 pme_cap; /* 20 Power Mgment capabilities */
u8 msi_cap; /* 21 MSI capabilities */
u8 clock_div; /* Clock divider */
__le16 pci_stat_lo; /* 22 PCI Status bits 15:0 */
__le16 pci_stat_hi; /* 23 PCI Status bits 31:16 */
__le16 dram_cfg_lo; /* 24 DRAM Configuration bits 15:0 */
__le16 dram_cfg_hi; /* 25 DRAM Configuration bits 31:16 */
__le16 dram_size; /* 26 DRAM size (bytes / 64K) */
__le16 gpio_tbi_ctrl; /* 27 GPIO/TBI controls for functions 1/0 */
__le16 eeprom_size; /* 28 EEPROM Size */
u8 mac[ETH_ALEN]; /* 29 MAC addresses (2 ports) */
u8 mac2[ETH_ALEN];
u8 fru_format; /* 35 Alacritech FRU format type */
u8 fru_assembly[6]; /* Alacritech FRU information */
u8 fru_rev[2];
u8 fru_serial[14];
u8 fru_pad[3];
u8 oem_fru[28]; /* optional OEM FRU information */
u8 pad[4]; /* Pad to 128 bytes - includes 2 checksum bytes
* (if OEM FRU info exists) and two unusable
* bytes at the end
*/
};
struct slic_stats {
u64 rx_packets;
u64 rx_bytes;
u64 rx_mcasts;
u64 rx_errors;
u64 tx_packets;
u64 tx_bytes;
/* HW STATS */
u64 rx_buff_miss;
u64 tx_dropped;
u64 irq_errs;
/* transport layer */
u64 rx_tpcsum;
u64 rx_tpoflow;
u64 rx_tphlen;
/* ip layer */
u64 rx_ipcsum;
u64 rx_iplen;
u64 rx_iphlen;
/* link layer */
u64 rx_early;
u64 rx_buffoflow;
u64 rx_lcode;
u64 rx_drbl;
u64 rx_crc;
u64 rx_oflow802;
u64 rx_uflow802;
/* oasis only */
u64 tx_carrier;
struct u64_stats_sync syncp;
};
struct slic_shmem_data {
__le32 isr;
__le32 link;
};
struct slic_shmem {
dma_addr_t isr_paddr;
dma_addr_t link_paddr;
struct slic_shmem_data *shmem_data;
};
struct slic_rx_info_oasis {
__le32 frame_status;
__le32 frame_status_b;
__le32 time_stamp;
__le32 checksum;
};
struct slic_rx_info_mojave {
__le32 frame_status;
__le16 byte_cnt;
__le16 tp_chksum;
__le16 ctx_hash;
__le16 mac_hash;
__le16 buff_lnk;
};
struct slic_stat_desc {
__le32 hnd;
__u8 pad[8];
__le32 status;
__u8 pad2[16];
};
struct slic_stat_queue {
struct slic_stat_desc *descs[SLIC_NUM_STAT_DESC_ARRAYS];
dma_addr_t paddr[SLIC_NUM_STAT_DESC_ARRAYS];
unsigned int addr_offset[SLIC_NUM_STAT_DESC_ARRAYS];
unsigned int active_array;
unsigned int len;
unsigned int done_idx;
size_t mem_size;
};
struct slic_tx_desc {
__le32 hnd;
__le32 rsvd;
u8 cmd;
u8 flags;
__le16 rsvd2;
__le32 totlen;
__le32 paddrl;
__le32 paddrh;
__le32 len;
__le32 type;
};
struct slic_tx_buffer {
struct sk_buff *skb;
DEFINE_DMA_UNMAP_ADDR(map_addr);
DEFINE_DMA_UNMAP_LEN(map_len);
struct slic_tx_desc *desc;
dma_addr_t desc_paddr;
};
struct slic_tx_queue {
struct dma_pool *dma_pool;
struct slic_tx_buffer *txbuffs;
unsigned int len;
unsigned int put_idx;
unsigned int done_idx;
};
struct slic_rx_desc {
u8 pad[16];
__le32 buffer;
__le32 length;
__le32 status;
};
struct slic_rx_buffer {
struct sk_buff *skb;
DEFINE_DMA_UNMAP_ADDR(map_addr);
DEFINE_DMA_UNMAP_LEN(map_len);
unsigned int addr_offset;
};
struct slic_rx_queue {
struct slic_rx_buffer *rxbuffs;
unsigned int len;
unsigned int done_idx;
unsigned int put_idx;
};
struct slic_device {
struct pci_dev *pdev;
struct net_device *netdev;
void __iomem *regs;
/* upper address setting lock */
spinlock_t upper_lock;
struct slic_shmem shmem;
struct napi_struct napi;
struct slic_rx_queue rxq;
struct slic_tx_queue txq;
struct slic_stat_queue stq;
struct slic_stats stats;
struct slic_upr_list upr_list;
/* link configuration lock */
spinlock_t link_lock;
bool promisc;
int speed;
unsigned int duplex;
bool is_fiber;
unsigned char model;
};
static inline u32 slic_read(struct slic_device *sdev, unsigned int reg)
{
return ioread32(sdev->regs + reg);
}
static inline void slic_write(struct slic_device *sdev, unsigned int reg,
u32 val)
{
iowrite32(val, sdev->regs + reg);
}
static inline void slic_flush_write(struct slic_device *sdev)
{
(void)ioread32(sdev->regs + SLIC_REG_HOSTID);
}
#endif /* _SLIC_H */
Reference in New Issue View Git Blame Copy Permalink