linux_dsm_epyc7002/drivers/gpu/drm/tegra/rgb.c
Thierry Reding 32c3dee11e drm/tegra: rgb: Restore DPMS
In order to restore DPMS with atomic mode-setting, move all code from
the ->mode_set() callback into ->enable(). At the same time, rename the
->prepare() callback to ->disable() to use the names preferred by atomic
mode-setting. This simplifies the calling sequence and will allow DPMS
code to use runtime PM in subsequent patches.

While at it, remove the enabled field that hasn't been used since the
demidlayering of the output drivers done in preparation for the atomic
mode-setting conversion.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13 13:48:54 +02:00

321 lines
9.2 KiB
C

/*
* Copyright (C) 2012 Avionic Design GmbH
* Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_panel.h>
#include "drm.h"
#include "dc.h"
struct tegra_rgb {
struct tegra_output output;
struct tegra_dc *dc;
struct clk *clk_parent;
struct clk *clk;
};
static inline struct tegra_rgb *to_rgb(struct tegra_output *output)
{
return container_of(output, struct tegra_rgb, output);
}
struct reg_entry {
unsigned long offset;
unsigned long value;
};
static const struct reg_entry rgb_enable[] = {
{ DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 },
{ DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 },
{ DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 },
{ DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 },
{ DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 },
};
static const struct reg_entry rgb_disable[] = {
{ DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
{ DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa },
{ DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa },
{ DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa },
{ DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa },
{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 },
{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
{ DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 },
{ DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 },
{ DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 },
{ DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 },
};
static void tegra_dc_write_regs(struct tegra_dc *dc,
const struct reg_entry *table,
unsigned int num)
{
unsigned int i;
for (i = 0; i < num; i++)
tegra_dc_writel(dc, table[i].value, table[i].offset);
}
static const struct drm_connector_funcs tegra_rgb_connector_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.reset = drm_atomic_helper_connector_reset,
.detect = tegra_output_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = tegra_output_connector_destroy,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static enum drm_mode_status
tegra_rgb_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
/*
* FIXME: For now, always assume that the mode is okay. There are
* unresolved issues with clk_round_rate(), which doesn't always
* reliably report whether a frequency can be set or not.
*/
return MODE_OK;
}
static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = {
.get_modes = tegra_output_connector_get_modes,
.mode_valid = tegra_rgb_connector_mode_valid,
.best_encoder = tegra_output_connector_best_encoder,
};
static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = {
.destroy = tegra_output_encoder_destroy,
};
static void tegra_rgb_encoder_disable(struct drm_encoder *encoder)
{
struct tegra_output *output = encoder_to_output(encoder);
struct tegra_rgb *rgb = to_rgb(output);
if (output->panel)
drm_panel_disable(output->panel);
tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable));
tegra_dc_commit(rgb->dc);
if (output->panel)
drm_panel_unprepare(output->panel);
}
static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
{
struct tegra_output *output = encoder_to_output(encoder);
struct tegra_rgb *rgb = to_rgb(output);
u32 value;
if (output->panel)
drm_panel_prepare(output->panel);
tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable));
value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL;
tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS);
/* XXX: parameterize? */
value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1));
value &= ~LVS_OUTPUT_POLARITY_LOW;
value &= ~LHS_OUTPUT_POLARITY_LOW;
tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1));
/* XXX: parameterize? */
value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB |
DISP_ORDER_RED_BLUE;
tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL);
/* XXX: parameterize? */
value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE;
tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS);
tegra_dc_commit(rgb->dc);
if (output->panel)
drm_panel_enable(output->panel);
}
static int
tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct tegra_output *output = encoder_to_output(encoder);
struct tegra_dc *dc = to_tegra_dc(conn_state->crtc);
unsigned long pclk = crtc_state->mode.clock * 1000;
struct tegra_rgb *rgb = to_rgb(output);
unsigned int div;
int err;
/*
* We may not want to change the frequency of the parent clock, since
* it may be a parent for other peripherals. This is due to the fact
* that on Tegra20 there's only a single clock dedicated to display
* (pll_d_out0), whereas later generations have a second one that can
* be used to independently drive a second output (pll_d2_out0).
*
* As a way to support multiple outputs on Tegra20 as well, pll_p is
* typically used as the parent clock for the display controllers.
* But this comes at a cost: pll_p is the parent of several other
* peripherals, so its frequency shouldn't change out of the blue.
*
* The best we can do at this point is to use the shift clock divider
* and hope that the desired frequency can be matched (or at least
* matched sufficiently close that the panel will still work).
*/
div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2;
pclk = 0;
err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent,
pclk, div);
if (err < 0) {
dev_err(output->dev, "failed to setup CRTC state: %d\n", err);
return err;
}
return err;
}
static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = {
.disable = tegra_rgb_encoder_disable,
.enable = tegra_rgb_encoder_enable,
.atomic_check = tegra_rgb_encoder_atomic_check,
};
int tegra_dc_rgb_probe(struct tegra_dc *dc)
{
struct device_node *np;
struct tegra_rgb *rgb;
int err;
np = of_get_child_by_name(dc->dev->of_node, "rgb");
if (!np || !of_device_is_available(np))
return -ENODEV;
rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
if (!rgb)
return -ENOMEM;
rgb->output.dev = dc->dev;
rgb->output.of_node = np;
rgb->dc = dc;
err = tegra_output_probe(&rgb->output);
if (err < 0)
return err;
rgb->clk = devm_clk_get(dc->dev, NULL);
if (IS_ERR(rgb->clk)) {
dev_err(dc->dev, "failed to get clock\n");
return PTR_ERR(rgb->clk);
}
rgb->clk_parent = devm_clk_get(dc->dev, "parent");
if (IS_ERR(rgb->clk_parent)) {
dev_err(dc->dev, "failed to get parent clock\n");
return PTR_ERR(rgb->clk_parent);
}
err = clk_set_parent(rgb->clk, rgb->clk_parent);
if (err < 0) {
dev_err(dc->dev, "failed to set parent clock: %d\n", err);
return err;
}
dc->rgb = &rgb->output;
return 0;
}
int tegra_dc_rgb_remove(struct tegra_dc *dc)
{
if (!dc->rgb)
return 0;
tegra_output_remove(dc->rgb);
dc->rgb = NULL;
return 0;
}
int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
{
struct tegra_output *output = dc->rgb;
int err;
if (!dc->rgb)
return -ENODEV;
drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_connector_helper_add(&output->connector,
&tegra_rgb_connector_helper_funcs);
output->connector.dpms = DRM_MODE_DPMS_OFF;
drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs,
DRM_MODE_ENCODER_LVDS);
drm_encoder_helper_add(&output->encoder,
&tegra_rgb_encoder_helper_funcs);
drm_mode_connector_attach_encoder(&output->connector,
&output->encoder);
drm_connector_register(&output->connector);
err = tegra_output_init(drm, output);
if (err < 0) {
dev_err(output->dev, "failed to initialize output: %d\n", err);
return err;
}
/*
* Other outputs can be attached to either display controller. The RGB
* outputs are an exception and work only with their parent display
* controller.
*/
output->encoder.possible_crtcs = drm_crtc_mask(&dc->base);
return 0;
}
int tegra_dc_rgb_exit(struct tegra_dc *dc)
{
if (dc->rgb)
tegra_output_exit(dc->rgb);
return 0;
}